diff options
Diffstat (limited to 'drivers/parisc/superio.c')
| -rw-r--r-- | drivers/parisc/superio.c | 41 |
1 files changed, 22 insertions, 19 deletions
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index d14888e..ba971fe 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -89,6 +89,9 @@ static struct superio_device sio_dev; #define DBG_INIT(x...) #endif +#define SUPERIO "SuperIO" +#define PFX SUPERIO ": " + static irqreturn_t superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs) { @@ -117,7 +120,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs) local_irq = results & 0x0f; if (local_irq == 2 || local_irq > 7) { - printk(KERN_ERR "SuperIO: slave interrupted!\n"); + printk(KERN_ERR PFX "slave interrupted!\n"); return IRQ_HANDLED; } @@ -128,7 +131,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs) outb(OCW3_ISR,IC_PIC1+0); results = inb(IC_PIC1+0); if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */ - printk(KERN_WARNING "SuperIO: spurious interrupt!\n"); + printk(KERN_WARNING PFX "spurious interrupt!\n"); return IRQ_HANDLED; } } @@ -163,27 +166,27 @@ superio_init(struct pci_dev *pcidev) /* ...then properly fixup the USB to point at suckyio PIC */ sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev); - printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n", + printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n", pci_name(pdev), pdev->irq); pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base); sio->sp1_base &= ~1; - printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base); + printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base); pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base); sio->sp2_base &= ~1; - printk (KERN_INFO "SuperIO: Serial port 2 at 0x%x\n", sio->sp2_base); + printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base); pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base); sio->pp_base &= ~1; - printk (KERN_INFO "SuperIO: Parallel port at 0x%x\n", sio->pp_base); + printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base); pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base); sio->fdc_base &= ~1; - printk (KERN_INFO "SuperIO: Floppy controller at 0x%x\n", sio->fdc_base); + printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base); pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base); sio->acpi_base &= ~1; - printk (KERN_INFO "SuperIO: ACPI at 0x%x\n", sio->acpi_base); + printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base); request_region (IC_PIC1, 0x1f, "pic1"); request_region (IC_PIC2, 0x1f, "pic2"); @@ -263,14 +266,14 @@ superio_init(struct pci_dev *pcidev) /* Setup USB power regulation */ outb(1, sio->acpi_base + USB_REG_CR); if (inb(sio->acpi_base + USB_REG_CR) & 1) - printk(KERN_INFO "SuperIO: USB regulator enabled\n"); + printk(KERN_INFO PFX "USB regulator enabled\n"); else - printk(KERN_ERR "USB regulator not initialized!\n"); + printk(KERN_ERR PFX "USB regulator not initialized!\n"); if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT, - "SuperIO", (void *)sio)) { + SUPERIO, (void *)sio)) { - printk(KERN_ERR "SuperIO: could not get irq\n"); + printk(KERN_ERR PFX "could not get irq\n"); BUG(); return; } @@ -284,7 +287,7 @@ static void superio_disable_irq(unsigned int irq) u8 r8; if ((irq < 1) || (irq == 2) || (irq > 7)) { - printk(KERN_ERR "SuperIO: Illegal irq number.\n"); + printk(KERN_ERR PFX "Illegal irq number.\n"); BUG(); return; } @@ -301,7 +304,7 @@ static void superio_enable_irq(unsigned int irq) u8 r8; if ((irq < 1) || (irq == 2) || (irq > 7)) { - printk(KERN_ERR "SuperIO: Illegal irq number (%d).\n", irq); + printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq); BUG(); return; } @@ -319,7 +322,7 @@ static unsigned int superio_startup_irq(unsigned int irq) } static struct hw_interrupt_type superio_interrupt_type = { - .typename = "SuperIO", + .typename = SUPERIO, .startup = superio_startup_irq, .shutdown = superio_disable_irq, .enable = superio_enable_irq, @@ -413,7 +416,7 @@ static void __devinit superio_serial_init(void) retval = early_serial_setup(&serial[0]); if (retval < 0) { - printk(KERN_WARNING "SuperIO: Register Serial #0 failed.\n"); + printk(KERN_WARNING PFX "Register Serial #0 failed.\n"); return; } @@ -423,7 +426,7 @@ static void __devinit superio_serial_init(void) retval = early_serial_setup(&serial[1]); if (retval < 0) - printk(KERN_WARNING "SuperIO: Register Serial #1 failed.\n"); + printk(KERN_WARNING PFX "Register Serial #1 failed.\n"); #endif /* CONFIG_SERIAL_8250 */ } @@ -437,7 +440,7 @@ static void __devinit superio_parport_init(void) PARPORT_DMA_NONE /* dma */, NULL /*struct pci_dev* */) ) - printk(KERN_WARNING "SuperIO: Probing parallel port failed.\n"); + printk(KERN_WARNING PFX "Probing parallel port failed.\n"); #endif /* CONFIG_PARPORT_PC */ } @@ -499,7 +502,7 @@ static struct pci_device_id superio_tbl[] = { }; static struct pci_driver superio_driver = { - .name = "SuperIO", + .name = SUPERIO, .id_table = superio_tbl, .probe = superio_probe, }; |
