summaryrefslogtreecommitdiffstats
path: root/drivers/nvmem
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/nvmem')
-rw-r--r--drivers/nvmem/Kconfig11
-rw-r--r--drivers/nvmem/Makefile2
-rw-r--r--drivers/nvmem/core.c3
-rw-r--r--drivers/nvmem/imx-iim.c173
-rw-r--r--drivers/nvmem/imx-ocotp.c254
-rw-r--r--drivers/nvmem/sunxi_sid.c89
6 files changed, 522 insertions, 10 deletions
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 650f1b1..101ced4 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -13,6 +13,17 @@ menuconfig NVMEM
if NVMEM
+config NVMEM_IMX_IIM
+ tristate "i.MX IC Identification Module support"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ This is a driver for the IC Identification Module (IIM) available on
+ i.MX SoCs, providing access to 4 Kbits of programmable
+ eFuses.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-imx-iim.
+
config NVMEM_IMX_OCOTP
tristate "i.MX6 On-Chip OTP Controller support"
depends on SOC_IMX6 || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 86e4599..1731406 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -8,6 +8,8 @@ nvmem_core-y := core.o
# Devices
obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
nvmem-bcm-ocotp-y := bcm-ocotp.o
+obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o
+nvmem-imx-iim-y := imx-iim.o
obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
nvmem-imx-ocotp-y := imx-ocotp.o
obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 408b521..8c830a8 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -468,7 +468,8 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
np = config->dev->of_node;
nvmem->dev.of_node = np;
dev_set_name(&nvmem->dev, "%s%d",
- config->name ? : "nvmem", config->id);
+ config->name ? : "nvmem",
+ config->name ? config->id : nvmem->id);
nvmem->read_only = of_property_read_bool(np, "read-only") |
config->read_only;
diff --git a/drivers/nvmem/imx-iim.c b/drivers/nvmem/imx-iim.c
new file mode 100644
index 0000000..52ff65e
--- /dev/null
+++ b/drivers/nvmem/imx-iim.c
@@ -0,0 +1,173 @@
+/*
+ * i.MX IIM driver
+ *
+ * Copyright (c) 2017 Pengutronix, Michael Grzeschik <m.grzeschik@pengutronix.de>
+ *
+ * Based on the barebox iim driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
+ * Orex Computed Radiography
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#define IIM_BANK_BASE(n) (0x800 + 0x400 * (n))
+
+struct imx_iim_drvdata {
+ unsigned int nregs;
+};
+
+struct iim_priv {
+ void __iomem *base;
+ struct clk *clk;
+ struct nvmem_config nvmem;
+};
+
+static int imx_iim_read(void *context, unsigned int offset,
+ void *buf, size_t bytes)
+{
+ struct iim_priv *iim = context;
+ int i, ret;
+ u8 *buf8 = buf;
+
+ ret = clk_prepare_enable(iim->clk);
+ if (ret)
+ return ret;
+
+ for (i = offset; i < offset + bytes; i++) {
+ int bank = i >> 5;
+ int reg = i & 0x1f;
+
+ *buf8++ = readl(iim->base + IIM_BANK_BASE(bank) + reg * 4);
+ }
+
+ clk_disable_unprepare(iim->clk);
+
+ return 0;
+}
+
+static struct imx_iim_drvdata imx27_drvdata = {
+ .nregs = 2 * 32,
+};
+
+static struct imx_iim_drvdata imx25_imx31_imx35_drvdata = {
+ .nregs = 3 * 32,
+};
+
+static struct imx_iim_drvdata imx51_drvdata = {
+ .nregs = 4 * 32,
+};
+
+static struct imx_iim_drvdata imx53_drvdata = {
+ .nregs = 4 * 32 + 16,
+};
+
+static const struct of_device_id imx_iim_dt_ids[] = {
+ {
+ .compatible = "fsl,imx25-iim",
+ .data = &imx25_imx31_imx35_drvdata,
+ }, {
+ .compatible = "fsl,imx27-iim",
+ .data = &imx27_drvdata,
+ }, {
+ .compatible = "fsl,imx31-iim",
+ .data = &imx25_imx31_imx35_drvdata,
+ }, {
+ .compatible = "fsl,imx35-iim",
+ .data = &imx25_imx31_imx35_drvdata,
+ }, {
+ .compatible = "fsl,imx51-iim",
+ .data = &imx51_drvdata,
+ }, {
+ .compatible = "fsl,imx53-iim",
+ .data = &imx53_drvdata,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, imx_iim_dt_ids);
+
+static int imx_iim_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct iim_priv *iim;
+ struct nvmem_device *nvmem;
+ struct nvmem_config *cfg;
+ const struct imx_iim_drvdata *drvdata = NULL;
+
+ iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL);
+ if (!iim)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iim->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(iim->base))
+ return PTR_ERR(iim->base);
+
+ of_id = of_match_device(imx_iim_dt_ids, dev);
+ if (!of_id)
+ return -ENODEV;
+
+ drvdata = of_id->data;
+
+ iim->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(iim->clk))
+ return PTR_ERR(iim->clk);
+
+ cfg = &iim->nvmem;
+
+ cfg->name = "imx-iim",
+ cfg->read_only = true,
+ cfg->word_size = 1,
+ cfg->stride = 1,
+ cfg->owner = THIS_MODULE,
+ cfg->reg_read = imx_iim_read,
+ cfg->dev = dev;
+ cfg->size = drvdata->nregs;
+ cfg->priv = iim;
+
+ nvmem = nvmem_register(cfg);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+}
+
+static int imx_iim_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static struct platform_driver imx_iim_driver = {
+ .probe = imx_iim_probe,
+ .remove = imx_iim_remove,
+ .driver = {
+ .name = "imx-iim",
+ .of_match_table = imx_iim_dt_ids,
+ },
+};
+module_platform_driver(imx_iim_driver);
+
+MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX IIM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index b8ca1e6..193ca8f 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -7,6 +7,9 @@
* Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
* Orex Computed Radiography
*
+ * Write support based on the fsl_otp driver,
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
@@ -24,14 +27,88 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/delay.h>
+
+#define IMX_OCOTP_OFFSET_B0W0 0x400 /* Offset from base address of the
+ * OTP Bank0 Word0
+ */
+#define IMX_OCOTP_OFFSET_PER_WORD 0x10 /* Offset between the start addr
+ * of two consecutive OTP words.
+ */
+
+#define IMX_OCOTP_ADDR_CTRL 0x0000
+#define IMX_OCOTP_ADDR_CTRL_SET 0x0004
+#define IMX_OCOTP_ADDR_CTRL_CLR 0x0008
+#define IMX_OCOTP_ADDR_TIMING 0x0010
+#define IMX_OCOTP_ADDR_DATA 0x0020
+
+#define IMX_OCOTP_BM_CTRL_ADDR 0x0000007F
+#define IMX_OCOTP_BM_CTRL_BUSY 0x00000100
+#define IMX_OCOTP_BM_CTRL_ERROR 0x00000200
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS 0x00000400
+
+#define DEF_RELAX 20 /* > 16.5ns */
+#define IMX_OCOTP_WR_UNLOCK 0x3E770000
+#define IMX_OCOTP_READ_LOCKED_VAL 0xBADABADA
+
+static DEFINE_MUTEX(ocotp_mutex);
struct ocotp_priv {
struct device *dev;
struct clk *clk;
void __iomem *base;
unsigned int nregs;
+ struct nvmem_config *config;
};
+static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
+{
+ int count;
+ u32 c, mask;
+
+ mask = IMX_OCOTP_BM_CTRL_BUSY | IMX_OCOTP_BM_CTRL_ERROR | flags;
+
+ for (count = 10000; count >= 0; count--) {
+ c = readl(base + IMX_OCOTP_ADDR_CTRL);
+ if (!(c & mask))
+ break;
+ cpu_relax();
+ }
+
+ if (count < 0) {
+ /* HW_OCOTP_CTRL[ERROR] will be set under the following
+ * conditions:
+ * - A write is performed to a shadow register during a shadow
+ * reload (essentially, while HW_OCOTP_CTRL[RELOAD_SHADOWS] is
+ * set. In addition, the contents of the shadow register shall
+ * not be updated.
+ * - A write is performed to a shadow register which has been
+ * locked.
+ * - A read is performed to from a shadow register which has
+ * been read locked.
+ * - A program is performed to a fuse word which has been locked
+ * - A read is performed to from a fuse word which has been read
+ * locked.
+ */
+ if (c & IMX_OCOTP_BM_CTRL_ERROR)
+ return -EPERM;
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void imx_ocotp_clr_err_if_set(void __iomem *base)
+{
+ u32 c;
+
+ c = readl(base + IMX_OCOTP_ADDR_CTRL);
+ if (!(c & IMX_OCOTP_BM_CTRL_ERROR))
+ return;
+
+ writel(IMX_OCOTP_BM_CTRL_ERROR, base + IMX_OCOTP_ADDR_CTRL_CLR);
+}
+
static int imx_ocotp_read(void *context, unsigned int offset,
void *val, size_t bytes)
{
@@ -47,26 +124,188 @@ static int imx_ocotp_read(void *context, unsigned int offset,
if (count > (priv->nregs - index))
count = priv->nregs - index;
+ mutex_lock(&ocotp_mutex);
+
ret = clk_prepare_enable(priv->clk);
if (ret < 0) {
+ mutex_unlock(&ocotp_mutex);
dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
return ret;
}
- for (i = index; i < (index + count); i++)
- *buf++ = readl(priv->base + 0x400 + i * 0x10);
+ ret = imx_ocotp_wait_for_busy(priv->base, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "timeout during read setup\n");
+ goto read_end;
+ }
+
+ for (i = index; i < (index + count); i++) {
+ *buf++ = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 +
+ i * IMX_OCOTP_OFFSET_PER_WORD);
+
+ /* 47.3.1.2
+ * For "read locked" registers 0xBADABADA will be returned and
+ * HW_OCOTP_CTRL[ERROR] will be set. It must be cleared by
+ * software before any new write, read or reload access can be
+ * issued
+ */
+ if (*(buf - 1) == IMX_OCOTP_READ_LOCKED_VAL)
+ imx_ocotp_clr_err_if_set(priv->base);
+ }
+ ret = 0;
+
+read_end:
clk_disable_unprepare(priv->clk);
+ mutex_unlock(&ocotp_mutex);
+ return ret;
+}
- return 0;
+static int imx_ocotp_write(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct ocotp_priv *priv = context;
+ u32 *buf = val;
+ int ret;
+
+ unsigned long clk_rate = 0;
+ unsigned long strobe_read, relax, strobe_prog;
+ u32 timing = 0;
+ u32 ctrl;
+ u8 waddr;
+
+ /* allow only writing one complete OTP word at a time */
+ if ((bytes != priv->config->word_size) ||
+ (offset % priv->config->word_size))
+ return -EINVAL;
+
+ mutex_lock(&ocotp_mutex);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ mutex_unlock(&ocotp_mutex);
+ dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+ return ret;
+ }
+
+ /* 47.3.1.3.1
+ * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+ * fields with timing values to match the current frequency of the
+ * ipg_clk. OTP writes will work at maximum bus frequencies as long
+ * as the HW_OCOTP_TIMING parameters are set correctly.
+ */
+ clk_rate = clk_get_rate(priv->clk);
+
+ relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+ strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+ strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+ timing = strobe_prog & 0x00000FFF;
+ timing |= (relax << 12) & 0x0000F000;
+ timing |= (strobe_read << 16) & 0x003F0000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+
+ /* 47.3.1.3.2
+ * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
+ * Overlapped accesses are not supported by the controller. Any pending
+ * write or reload must be completed before a write access can be
+ * requested.
+ */
+ ret = imx_ocotp_wait_for_busy(priv->base, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "timeout during timing setup\n");
+ goto write_end;
+ }
+
+ /* 47.3.1.3.3
+ * Write the requested address to HW_OCOTP_CTRL[ADDR] and program the
+ * unlock code into HW_OCOTP_CTRL[WR_UNLOCK]. This must be programmed
+ * for each write access. The lock code is documented in the register
+ * description. Both the unlock code and address can be written in the
+ * same operation.
+ */
+ /* OTP write/read address specifies one of 128 word address locations */
+ waddr = offset / 4;
+
+ ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
+ ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR;
+ ctrl |= waddr & IMX_OCOTP_BM_CTRL_ADDR;
+ ctrl |= IMX_OCOTP_WR_UNLOCK;
+
+ writel(ctrl, priv->base + IMX_OCOTP_ADDR_CTRL);
+
+ /* 47.3.1.3.4
+ * Write the data to the HW_OCOTP_DATA register. This will automatically
+ * set HW_OCOTP_CTRL[BUSY] and clear HW_OCOTP_CTRL[WR_UNLOCK]. To
+ * protect programming same OTP bit twice, before program OCOTP will
+ * automatically read fuse value in OTP and use read value to mask
+ * program data. The controller will use masked program data to program
+ * a 32-bit word in the OTP per the address in HW_OCOTP_CTRL[ADDR]. Bit
+ * fields with 1's will result in that OTP bit being programmed. Bit
+ * fields with 0's will be ignored. At the same time that the write is
+ * accepted, the controller makes an internal copy of
+ * HW_OCOTP_CTRL[ADDR] which cannot be updated until the next write
+ * sequence is initiated. This copy guarantees that erroneous writes to
+ * HW_OCOTP_CTRL[ADDR] will not affect an active write operation. It
+ * should also be noted that during the programming HW_OCOTP_DATA will
+ * shift right (with zero fill). This shifting is required to program
+ * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
+ * modified.
+ */
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA);
+
+ /* 47.4.1.4.5
+ * Once complete, the controller will clear BUSY. A write request to a
+ * protected or locked region will result in no OTP access and no
+ * setting of HW_OCOTP_CTRL[BUSY]. In addition HW_OCOTP_CTRL[ERROR] will
+ * be set. It must be cleared by software before any new write access
+ * can be issued.
+ */
+ ret = imx_ocotp_wait_for_busy(priv->base, 0);
+ if (ret < 0) {
+ if (ret == -EPERM) {
+ dev_err(priv->dev, "failed write to locked region");
+ imx_ocotp_clr_err_if_set(priv->base);
+ } else {
+ dev_err(priv->dev, "timeout during data write\n");
+ }
+ goto write_end;
+ }
+
+ /* 47.3.1.4
+ * Write Postamble: Due to internal electrical characteristics of the
+ * OTP during writes, all OTP operations following a write must be
+ * separated by 2 us after the clearing of HW_OCOTP_CTRL_BUSY following
+ * the write.
+ */
+ udelay(2);
+
+ /* reload all shadow registers */
+ writel(IMX_OCOTP_BM_CTRL_REL_SHADOWS,
+ priv->base + IMX_OCOTP_ADDR_CTRL_SET);
+ ret = imx_ocotp_wait_for_busy(priv->base,
+ IMX_OCOTP_BM_CTRL_REL_SHADOWS);
+ if (ret < 0) {
+ dev_err(priv->dev, "timeout during shadow register reload\n");
+ goto write_end;
+ }
+
+write_end:
+ clk_disable_unprepare(priv->clk);
+ mutex_unlock(&ocotp_mutex);
+ if (ret < 0)
+ return ret;
+ return bytes;
}
static struct nvmem_config imx_ocotp_nvmem_config = {
.name = "imx-ocotp",
- .read_only = true,
+ .read_only = false,
.word_size = 4,
.stride = 4,
.owner = THIS_MODULE,
.reg_read = imx_ocotp_read,
+ .reg_write = imx_ocotp_write,
};
static const struct of_device_id imx_ocotp_dt_ids[] = {
@@ -74,6 +313,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx6sl-ocotp", (void *)64 },
{ .compatible = "fsl,imx6sx-ocotp", (void *)128 },
{ .compatible = "fsl,imx6ul-ocotp", (void *)128 },
+ { .compatible = "fsl,imx7d-ocotp", (void *)64 },
{ },
};
MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
@@ -90,12 +330,14 @@ static int imx_ocotp_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ priv->dev = dev;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
- priv->clk = devm_clk_get(&pdev->dev, NULL);
+ priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
@@ -104,7 +346,9 @@ static int imx_ocotp_probe(struct platform_device *pdev)
imx_ocotp_nvmem_config.size = 4 * priv->nregs;
imx_ocotp_nvmem_config.dev = dev;
imx_ocotp_nvmem_config.priv = priv;
+ priv->config = &imx_ocotp_nvmem_config;
nvmem = nvmem_register(&imx_ocotp_nvmem_config);
+
if (IS_ERR(nvmem))
return PTR_ERR(nvmem);
diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index 1567ccc..0d6648b 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -17,13 +17,24 @@
#include <linux/device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/nvmem-provider.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/random.h>
+/* Registers and special values for doing register-based SID readout on H3 */
+#define SUN8I_SID_PRCTL 0x40
+#define SUN8I_SID_RDKEY 0x60
+
+#define SUN8I_SID_OFFSET_MASK 0x1FF
+#define SUN8I_SID_OFFSET_SHIFT 16
+#define SUN8I_SID_OP_LOCK (0xAC << 8)
+#define SUN8I_SID_READ BIT(1)
+
static struct nvmem_config econfig = {
.name = "sunxi-sid",
.read_only = true,
@@ -32,8 +43,15 @@ static struct nvmem_config econfig = {
.owner = THIS_MODULE,
};
+struct sunxi_sid_cfg {
+ u32 value_offset;
+ u32 size;
+ bool need_register_readout;
+};
+
struct sunxi_sid {
void __iomem *base;
+ u32 value_offset;
};
/* We read the entire key, due to a 32 bit read alignment requirement. Since we
@@ -58,12 +76,36 @@ static int sunxi_sid_read(void *context, unsigned int offset,
struct sunxi_sid *sid = context;
u8 *buf = val;
+ /* Offset the read operation to the real position of SID */
+ offset += sid->value_offset;
+
while (bytes--)
*buf++ = sunxi_sid_read_byte(sid, offset++);
return 0;
}
+static int sun8i_sid_register_readout(const struct sunxi_sid *sid,
+ const unsigned int word)
+{
+ u32 reg_val;
+ int ret;
+
+ /* Set word, lock access, and set read command */
+ reg_val = (word & SUN8I_SID_OFFSET_MASK)
+ << SUN8I_SID_OFFSET_SHIFT;
+ reg_val |= SUN8I_SID_OP_LOCK | SUN8I_SID_READ;
+ writel(reg_val, sid->base + SUN8I_SID_PRCTL);
+
+ ret = readl_poll_timeout(sid->base + SUN8I_SID_PRCTL, reg_val,
+ !(reg_val & SUN8I_SID_READ), 100, 250000);
+ if (ret)
+ return ret;
+
+ writel(0, sid->base + SUN8I_SID_PRCTL);
+ return 0;
+}
+
static int sunxi_sid_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -72,18 +114,42 @@ static int sunxi_sid_probe(struct platform_device *pdev)
struct sunxi_sid *sid;
int ret, i, size;
char *randomness;
+ const struct sunxi_sid_cfg *cfg;
sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL);
if (!sid)
return -ENOMEM;
+ cfg = of_device_get_match_data(dev);
+ if (!cfg)
+ return -EINVAL;
+ sid->value_offset = cfg->value_offset;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sid->base = devm_ioremap_resource(dev, res);
if (IS_ERR(sid->base))
return PTR_ERR(sid->base);
- size = resource_size(res) - 1;
- econfig.size = resource_size(res);
+ size = cfg->size;
+
+ if (cfg->need_register_readout) {
+ /*
+ * H3's SID controller have a bug that the value at 0x200
+ * offset is not the correct value when the hardware is reseted.
+ * However, after doing a register-based read operation, the
+ * value become right.
+ * Do a full read operation here, but ignore its value
+ * (as it's more fast to read by direct MMIO value than
+ * with registers)
+ */
+ for (i = 0; i < (size >> 2); i++) {
+ ret = sun8i_sid_register_readout(sid, i);
+ if (ret)
+ return ret;
+ }
+ }
+
+ econfig.size = size;
econfig.dev = dev;
econfig.reg_read = sunxi_sid_read;
econfig.priv = sid;
@@ -119,9 +185,24 @@ static int sunxi_sid_remove(struct platform_device *pdev)
return nvmem_unregister(nvmem);
}
+static const struct sunxi_sid_cfg sun4i_a10_cfg = {
+ .size = 0x10,
+};
+
+static const struct sunxi_sid_cfg sun7i_a20_cfg = {
+ .size = 0x200,
+};
+
+static const struct sunxi_sid_cfg sun8i_h3_cfg = {
+ .value_offset = 0x200,
+ .size = 0x100,
+ .need_register_readout = true,
+};
+
static const struct of_device_id sunxi_sid_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-sid" },
- { .compatible = "allwinner,sun7i-a20-sid" },
+ { .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
+ { .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
{/* sentinel */},
};
MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
OpenPOWER on IntegriCloud