diff options
Diffstat (limited to 'drivers/nfc')
| -rw-r--r-- | drivers/nfc/pn544/i2c.c | 346 |
1 files changed, 334 insertions, 12 deletions
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index 017dc61..01e27d4 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -25,11 +25,14 @@ #include <linux/miscdevice.h> #include <linux/interrupt.h> #include <linux/delay.h> - +#include <linux/nfc.h> +#include <linux/firmware.h> +#include <linux/unaligned/access_ok.h> #include <linux/platform_data/pn544.h> #include <net/nfc/hci.h> #include <net/nfc/llc.h> +#include <net/nfc/nfc.h> #include "pn544.h" @@ -55,6 +58,58 @@ MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table); #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c" +#define PN544_FW_CMD_WRITE 0x08 +#define PN544_FW_CMD_CHECK 0x06 + +struct pn544_i2c_fw_frame_write { + u8 cmd; + u16 be_length; + u8 be_dest_addr[3]; + u16 be_datalen; + u8 data[]; +} __packed; + +struct pn544_i2c_fw_frame_check { + u8 cmd; + u16 be_length; + u8 be_start_addr[3]; + u16 be_datalen; + u16 be_crc; +} __packed; + +struct pn544_i2c_fw_frame_response { + u8 status; + u16 be_length; +} __packed; + +struct pn544_i2c_fw_blob { + u32 be_size; + u32 be_destaddr; + u8 data[]; +}; + +#define PN544_FW_CMD_RESULT_TIMEOUT 0x01 +#define PN544_FW_CMD_RESULT_BAD_CRC 0x02 +#define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08 +#define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B +#define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11 +#define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18 +#define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74 + +#define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) + +#define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7 +#define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE +#define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8 +#define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\ + PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\ + PN544_FW_WRITE_BUFFER_MAX_LEN) + +#define FW_WORK_STATE_IDLE 1 +#define FW_WORK_STATE_START 2 +#define FW_WORK_STATE_WAIT_WRITE_ANSWER 3 +#define FW_WORK_STATE_WAIT_CHECK_ANSWER 4 + struct pn544_i2c_phy { struct i2c_client *i2c_dev; struct nfc_hci_dev *hdev; @@ -64,6 +119,16 @@ struct pn544_i2c_phy { unsigned int gpio_fw; unsigned int en_polarity; + struct work_struct fw_work; + int fw_work_state; + char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1]; + const struct firmware *fw; + u32 fw_blob_dest_addr; + size_t fw_blob_size; + const u8 *fw_blob_data; + size_t fw_written; + int fw_cmd_result; + int powered; int run_mode; @@ -313,6 +378,42 @@ flush: return r; } +static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy) +{ + int r; + struct pn544_i2c_fw_frame_response response; + struct i2c_client *client = phy->i2c_dev; + + r = i2c_master_recv(client, (char *) &response, sizeof(response)); + if (r != sizeof(response)) { + dev_err(&client->dev, "cannot read fw status\n"); + return -EIO; + } + + usleep_range(3000, 6000); + + switch (response.status) { + case 0: + return 0; + case PN544_FW_CMD_RESULT_TIMEOUT: + return -ETIMEDOUT; + case PN544_FW_CMD_RESULT_BAD_CRC: + return -ENODATA; + case PN544_FW_CMD_RESULT_ACCESS_DENIED: + return -EACCES; + case PN544_FW_CMD_RESULT_PROTOCOL_ERROR: + return -EPROTO; + case PN544_FW_CMD_RESULT_INVALID_PARAMETER: + return -EINVAL; + case PN544_FW_CMD_RESULT_INVALID_LENGTH: + return -EBADMSG; + case PN544_FW_CMD_RESULT_WRITE_FAILED: + return -EIO; + default: + return -EIO; + } +} + /* * Reads an shdlc frame from the chip. This is not as straightforward as it * seems. There are cases where we could loose the frame start synchronization. @@ -347,19 +448,23 @@ static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id) if (phy->hard_fault != 0) return IRQ_HANDLED; - r = pn544_hci_i2c_read(phy, &skb); - if (r == -EREMOTEIO) { - phy->hard_fault = r; - - nfc_hci_recv_frame(phy->hdev, NULL); + if (phy->run_mode == PN544_FW_MODE) { + phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy); + schedule_work(&phy->fw_work); + } else { + r = pn544_hci_i2c_read(phy, &skb); + if (r == -EREMOTEIO) { + phy->hard_fault = r; - return IRQ_HANDLED; - } else if ((r == -ENOMEM) || (r == -EBADMSG)) { - return IRQ_HANDLED; - } + nfc_hci_recv_frame(phy->hdev, NULL); - nfc_hci_recv_frame(phy->hdev, skb); + return IRQ_HANDLED; + } else if ((r == -ENOMEM) || (r == -EBADMSG)) { + return IRQ_HANDLED; + } + nfc_hci_recv_frame(phy->hdev, skb); + } return IRQ_HANDLED; } @@ -369,6 +474,215 @@ static struct nfc_phy_ops i2c_phy_ops = { .disable = pn544_hci_i2c_disable, }; +static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name) +{ + struct pn544_i2c_phy *phy = phy_id; + + pr_info(DRIVER_DESC ": Starting Firmware Download (%s)\n", + firmware_name); + + strcpy(phy->firmware_name, firmware_name); + + phy->fw_work_state = FW_WORK_STATE_START; + + schedule_work(&phy->fw_work); + + return 0; +} + +static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy, + int result) +{ + pr_info(DRIVER_DESC ": Firmware Download Complete, result=%d\n", result); + + pn544_hci_i2c_disable(phy); + + phy->fw_work_state = FW_WORK_STATE_IDLE; + + if (phy->fw) { + release_firmware(phy->fw); + phy->fw = NULL; + } + + nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result); +} + +static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr, + const u8 *data, u16 datalen) +{ + u8 frame[PN544_FW_I2C_MAX_PAYLOAD]; + struct pn544_i2c_fw_frame_write *framep; + u16 params_len; + int framelen; + int r; + + if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN) + datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN; + + framep = (struct pn544_i2c_fw_frame_write *) frame; + + params_len = sizeof(framep->be_dest_addr) + + sizeof(framep->be_datalen) + datalen; + framelen = params_len + sizeof(framep->cmd) + + sizeof(framep->be_length); + + framep->cmd = PN544_FW_CMD_WRITE; + + put_unaligned_be16(params_len, &framep->be_length); + + framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16; + framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8; + framep->be_dest_addr[2] = dest_addr & 0xff; + + put_unaligned_be16(datalen, &framep->be_datalen); + + memcpy(framep->data, data, datalen); + + r = i2c_master_send(client, frame, framelen); + + if (r == framelen) + return datalen; + else if (r < 0) + return r; + else + return -EIO; +} + +static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr, + const u8 *data, u16 datalen) +{ + struct pn544_i2c_fw_frame_check frame; + int r; + u16 crc; + + /* calculate local crc for the data we want to check */ + crc = crc_ccitt(0xffff, data, datalen); + + frame.cmd = PN544_FW_CMD_CHECK; + + put_unaligned_be16(sizeof(frame.be_start_addr) + + sizeof(frame.be_datalen) + sizeof(frame.be_crc), + &frame.be_length); + + /* tell the chip the memory region to which our crc applies */ + frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16; + frame.be_start_addr[1] = (start_addr & 0xff00) >> 8; + frame.be_start_addr[2] = start_addr & 0xff; + + put_unaligned_be16(datalen, &frame.be_datalen); + + /* + * and give our local crc. Chip will calculate its own crc for the + * region and compare with ours. + */ + put_unaligned_be16(crc, &frame.be_crc); + + r = i2c_master_send(client, (const char *) &frame, sizeof(frame)); + + if (r == sizeof(frame)) + return 0; + else if (r < 0) + return r; + else + return -EIO; +} + +static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy) +{ + int r; + + r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev, + phy->fw_blob_dest_addr + phy->fw_written, + phy->fw_blob_data + phy->fw_written, + phy->fw_blob_size - phy->fw_written); + if (r < 0) + return r; + + phy->fw_written += r; + phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER; + + return 0; +} + +static void pn544_hci_i2c_fw_work(struct work_struct *work) +{ + struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy, + fw_work); + int r; + struct pn544_i2c_fw_blob *blob; + + switch (phy->fw_work_state) { + case FW_WORK_STATE_START: + pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE); + + r = request_firmware(&phy->fw, phy->firmware_name, + &phy->i2c_dev->dev); + if (r < 0) + goto exit_state_start; + + blob = (struct pn544_i2c_fw_blob *) phy->fw->data; + phy->fw_blob_size = get_unaligned_be32(&blob->be_size); + phy->fw_blob_dest_addr = get_unaligned_be32(&blob->be_destaddr); + phy->fw_blob_data = blob->data; + + phy->fw_written = 0; + r = pn544_hci_i2c_fw_write_chunk(phy); + +exit_state_start: + if (r < 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_WRITE_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_write_answer; + + if (phy->fw_written == phy->fw_blob_size) { + r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev, + phy->fw_blob_dest_addr, + phy->fw_blob_data, + phy->fw_blob_size); + if (r < 0) + goto exit_state_wait_write_answer; + phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER; + break; + } + + r = pn544_hci_i2c_fw_write_chunk(phy); + +exit_state_wait_write_answer: + if (r < 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + case FW_WORK_STATE_WAIT_CHECK_ANSWER: + r = phy->fw_cmd_result; + if (r < 0) + goto exit_state_wait_check_answer; + + blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data + + phy->fw_blob_size); + phy->fw_blob_size = get_unaligned_be32(&blob->be_size); + if (phy->fw_blob_size != 0) { + phy->fw_blob_dest_addr = + get_unaligned_be32(&blob->be_destaddr); + phy->fw_blob_data = blob->data; + + phy->fw_written = 0; + r = pn544_hci_i2c_fw_write_chunk(phy); + } + +exit_state_wait_check_answer: + if (r < 0 || phy->fw_blob_size == 0) + pn544_hci_i2c_fw_work_complete(phy, r); + break; + + default: + break; + } +} + static int pn544_hci_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -392,6 +706,9 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, return -ENOMEM; } + INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work); + phy->fw_work_state = FW_WORK_STATE_IDLE; + phy->i2c_dev = client; i2c_set_clientdata(client, phy); @@ -428,7 +745,8 @@ static int pn544_hci_i2c_probe(struct i2c_client *client, r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM, - PN544_HCI_I2C_LLC_MAX_PAYLOAD, NULL, &phy->hdev); + PN544_HCI_I2C_LLC_MAX_PAYLOAD, + pn544_hci_i2c_fw_download, &phy->hdev); if (r < 0) goto err_hci; @@ -451,6 +769,10 @@ static int pn544_hci_i2c_remove(struct i2c_client *client) dev_dbg(&client->dev, "%s\n", __func__); + cancel_work_sync(&phy->fw_work); + if (phy->fw_work_state != FW_WORK_STATE_IDLE) + pn544_hci_i2c_fw_work_complete(phy, -ENODEV); + pn544_hci_remove(phy->hdev); if (phy->powered) |
