diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ks8842.c | 732 |
3 files changed, 738 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f19018d..18c29a8 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1723,6 +1723,11 @@ config TLAN Please email feedback to <torben.mathiasen@compaq.com>. +config KS8842 + tristate "Micrel KSZ8842" + help + This platform driver is for Micrel KSZ8842 chip. + config VIA_RHINE tristate "VIA Rhine support" depends on NET_PCI && PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 774c2b4..1c378dd 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SKFP) += skfp/ +obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c new file mode 100644 index 0000000..39b0aea --- /dev/null +++ b/drivers/net/ks8842.c @@ -0,0 +1,732 @@ +/* + * ks8842_main.c timberdale KS8842 ethernet driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * The Micrel KS8842 behind the timberdale FPGA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> + +#define DRV_NAME "ks8842" + +/* Timberdale specific Registers */ +#define REG_TIMB_RST 0x1c + +/* KS8842 registers */ + +#define REG_SELECT_BANK 0x0e + +/* bank 0 registers */ +#define REG_QRFCR 0x04 + +/* bank 2 registers */ +#define REG_MARL 0x00 +#define REG_MARM 0x02 +#define REG_MARH 0x04 + +/* bank 3 registers */ +#define REG_GRR 0x06 + +/* bank 16 registers */ +#define REG_TXCR 0x00 +#define REG_TXSR 0x02 +#define REG_RXCR 0x04 +#define REG_TXMIR 0x08 +#define REG_RXMIR 0x0A + +/* bank 17 registers */ +#define REG_TXQCR 0x00 +#define REG_RXQCR 0x02 +#define REG_TXFDPR 0x04 +#define REG_RXFDPR 0x06 +#define REG_QMU_DATA_LO 0x08 +#define REG_QMU_DATA_HI 0x0A + +/* bank 18 registers */ +#define REG_IER 0x00 +#define IRQ_LINK_CHANGE 0x8000 +#define IRQ_TX 0x4000 +#define IRQ_RX 0x2000 +#define IRQ_RX_OVERRUN 0x0800 +#define IRQ_TX_STOPPED 0x0200 +#define IRQ_RX_STOPPED 0x0100 +#define IRQ_RX_ERROR 0x0080 +#define ENABLED_IRQS (IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \ + IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR) +#define REG_ISR 0x02 +#define REG_RXSR 0x04 +#define RXSR_VALID 0x8000 +#define RXSR_BROADCAST 0x80 +#define RXSR_MULTICAST 0x40 +#define RXSR_UNICAST 0x20 +#define RXSR_FRAMETYPE 0x08 +#define RXSR_TOO_LONG 0x04 +#define RXSR_RUNT 0x02 +#define RXSR_CRC_ERROR 0x01 +#define RXSR_ERROR (RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR) + +/* bank 32 registers */ +#define REG_SW_ID_AND_ENABLE 0x00 +#define REG_SGCR1 0x02 +#define REG_SGCR2 0x04 +#define REG_SGCR3 0x06 + +/* bank 39 registers */ +#define REG_MACAR1 0x00 +#define REG_MACAR2 0x02 +#define REG_MACAR3 0x04 + +/* bank 45 registers */ +#define REG_P1MBCR 0x00 +#define REG_P1MBSR 0x02 + +/* bank 46 registers */ +#define REG_P2MBCR 0x00 +#define REG_P2MBSR 0x02 + +/* bank 48 registers */ +#define REG_P1CR2 0x02 + +/* bank 49 registers */ +#define REG_P1CR4 0x02 +#define REG_P1SR 0x04 + +struct ks8842_adapter { + void __iomem *hw_addr; + int irq; + struct tasklet_struct tasklet; + spinlock_t lock; /* spinlock to be interrupt safe */ + struct platform_device *pdev; +}; + +static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank) +{ + iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK); +} + +static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank, + u8 value, int offset) +{ + ks8842_select_bank(adapter, bank); + iowrite8(value, adapter->hw_addr + offset); +} + +static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank, + u16 value, int offset) +{ + ks8842_select_bank(adapter, bank); + iowrite16(value, adapter->hw_addr + offset); +} + +static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank, + u16 bits, int offset) +{ + u16 reg; + ks8842_select_bank(adapter, bank); + reg = ioread16(adapter->hw_addr + offset); + reg |= bits; + iowrite16(reg, adapter->hw_addr + offset); +} + +static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank, + u16 bits, int offset) +{ + u16 reg; + ks8842_select_bank(adapter, bank); + reg = ioread16(adapter->hw_addr + offset); + reg &= ~bits; + iowrite16(reg, adapter->hw_addr + offset); +} + +static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank, + u32 value, int offset) +{ + ks8842_select_bank(adapter, bank); + iowrite32(value, adapter->hw_addr + offset); +} + +static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank, + int offset) +{ + ks8842_select_bank(adapter, bank); + return ioread8(adapter->hw_addr + offset); +} + +static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank, + int offset) +{ + ks8842_select_bank(adapter, bank); + return ioread16(adapter->hw_addr + offset); +} + +static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank, + int offset) +{ + ks8842_select_bank(adapter, bank); + return ioread32(adapter->hw_addr + offset); +} + +static void ks8842_reset(struct ks8842_adapter *adapter) +{ + /* The KS8842 goes haywire when doing softare reset + * a work around in the timberdale IP is implemented to + * do a hardware reset instead + ks8842_write16(adapter, 3, 1, REG_GRR); + msleep(10); + iowrite16(0, adapter->hw_addr + REG_GRR); + */ + iowrite16(32, adapter->hw_addr + REG_SELECT_BANK); + iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST); + msleep(20); +} + +static void ks8842_update_link_status(struct net_device *netdev, + struct ks8842_adapter *adapter) +{ + /* check the status of the link */ + if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) { + netif_carrier_on(netdev); + netif_wake_queue(netdev); + } else { + netif_stop_queue(netdev); + netif_carrier_off(netdev); + } +} + +static void ks8842_enable_tx(struct ks8842_adapter *adapter) +{ + ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR); +} + +static void ks8842_disable_tx(struct ks8842_adapter *adapter) +{ + ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR); +} + +static void ks8842_enable_rx(struct ks8842_adapter *adapter) +{ + ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR); +} + +static void ks8842_disable_rx(struct ks8842_adapter *adapter) +{ + ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR); +} + +static void ks8842_reset_hw(struct ks8842_adapter *adapter) +{ + /* reset the HW */ + ks8842_reset(adapter); + + /* Enable QMU Transmit flow control / transmit padding / Transmit CRC */ + ks8842_write16(adapter, 16, 0x000E, REG_TXCR); + + /* enable the receiver, uni + multi + broadcast + flow ctrl + + crc strip */ + ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400, + REG_RXCR); + + /* TX frame pointer autoincrement */ + ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR); + + /* RX frame pointer autoincrement */ + ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR); + + /* RX 2 kb high watermark */ + ks8842_write16(adapter, 0, 0x1000, REG_QRFCR); + + /* aggresive back off in half duplex */ + ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1); + + /* enable no excessive collison drop */ + ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2); + + /* Enable port 1 force flow control / back pressure / transmit / recv */ + ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2); + + /* restart port auto-negotiation */ + ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4); + /* only advertise 10Mbps */ + ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4); + + /* Enable the transmitter */ + ks8842_enable_tx(adapter); + + /* Enable the receiver */ + ks8842_enable_rx(adapter); + + /* clear all interrupts */ + ks8842_write16(adapter, 18, 0xffff, REG_ISR); + + /* enable interrupts */ + ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER); + + /* enable the switch */ + ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE); +} + +static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest) +{ + int i; + u16 mac; + + for (i = 0; i < ETH_ALEN; i++) + dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i); + + /* make sure the switch port uses the same MAC as the QMU */ + mac = ks8842_read16(adapter, 2, REG_MARL); + ks8842_write16(adapter, 39, mac, REG_MACAR1); + mac = ks8842_read16(adapter, 2, REG_MARM); + ks8842_write16(adapter, 39, mac, REG_MACAR2); + mac = ks8842_read16(adapter, 2, REG_MARH); + ks8842_write16(adapter, 39, mac, REG_MACAR3); +} + +static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter) +{ + return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff; +} + +static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct ks8842_adapter *adapter = netdev_priv(netdev); + int len = skb->len; + u32 *ptr = (u32 *)skb->data; + u32 ctrl; + + dev_dbg(&adapter->pdev->dev, + "%s: len %u head %p data %p tail %p end %p\n", + __func__, skb->len, skb->head, skb->data, + skb_tail_pointer(skb), skb_end_pointer(skb)); + + /* check FIFO buffer space, we need space for CRC and command bits */ + if (ks8842_tx_fifo_space(adapter) < len + 8) + return NETDEV_TX_BUSY; + + /* the control word, enable IRQ, port 1 and the length */ + ctrl = 0x8000 | 0x100 | (len << 16); + ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO); + + netdev->stats.tx_bytes += len; + + /* copy buffer */ + while (len > 0) { + iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO); + len -= sizeof(u32); + ptr++; + } + + /* enqueue packet */ + ks8842_write16(adapter, 17, 1, REG_TXQCR); + + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +static void ks8842_rx_frame(struct net_device *netdev, + struct ks8842_adapter *adapter) +{ + u32 status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO); + int len = (status >> 16) & 0x7ff; + + status &= 0xffff; + + dev_dbg(&adapter->pdev->dev, "%s - rx_data: status: %x\n", + __func__, status); + + /* check the status */ + if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) { + struct sk_buff *skb = netdev_alloc_skb(netdev, len + 2); + + dev_dbg(&adapter->pdev->dev, "%s, got package, len: %d\n", + __func__, len); + if (skb) { + u32 *data; + + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += len; + if (status & RXSR_MULTICAST) + netdev->stats.multicast++; + + /* Align socket buffer in 4-byte boundary for + better performance. */ + skb_reserve(skb, 2); + data = (u32 *)skb_put(skb, len); + + ks8842_select_bank(adapter, 17); + while (len > 0) { + *data++ = ioread32(adapter->hw_addr + + REG_QMU_DATA_LO); + len -= sizeof(u32); + } + + skb->protocol = eth_type_trans(skb, netdev); + netif_rx(skb); + } else + netdev->stats.rx_dropped++; + } else { + dev_dbg(&adapter->pdev->dev, "RX error, status: %x\n", status); + netdev->stats.rx_errors++; + if (status & RXSR_TOO_LONG) + netdev->stats.rx_length_errors++; + if (status & RXSR_CRC_ERROR) + netdev->stats.rx_crc_errors++; + if (status & RXSR_RUNT) + netdev->stats.rx_frame_errors++; + } + + /* set high watermark to 3K */ + ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR); + + /* release the frame */ + ks8842_write16(adapter, 17, 0x01, REG_RXQCR); + + /* set high watermark to 2K */ + ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR); +} + +void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter) +{ + u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff; + dev_dbg(&adapter->pdev->dev, "%s Entry - rx_data: %d\n", + __func__, rx_data); + while (rx_data) { + ks8842_rx_frame(netdev, adapter); + rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff; + } +} + +void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter) +{ + u16 sr = ks8842_read16(adapter, 16, REG_TXSR); + dev_dbg(&adapter->pdev->dev, "%s - entry, sr: %x\n", __func__, sr); + netdev->stats.tx_packets++; + if (netif_queue_stopped(netdev)) + netif_wake_queue(netdev); +} + +void ks8842_handle_rx_overrun(struct net_device *netdev, + struct ks8842_adapter *adapter) +{ + dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); + netdev->stats.rx_errors++; + netdev->stats.rx_fifo_errors++; +} + +void ks8842_tasklet(unsigned long arg) +{ + struct net_device *netdev = (struct net_device *)arg; + struct ks8842_adapter *adapter = netdev_priv(netdev); + u16 isr; + unsigned long flags; + u16 entry_bank; + + /* read current bank to be able to set it back */ + spin_lock_irqsave(&adapter->lock, flags); + entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK); + spin_unlock_irqrestore(&adapter->lock, flags); + + isr = ks8842_read16(adapter, 18, REG_ISR); + dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr); + + /* Ack */ + ks8842_write16(adapter, 18, isr, REG_ISR); + + if (!netif_running(netdev)) + return; + + if (isr & IRQ_LINK_CHANGE) + ks8842_update_link_status(netdev, adapter); + + if (isr & (IRQ_RX | IRQ_RX_ERROR)) + ks8842_handle_rx(netdev, adapter); + + if (isr & IRQ_TX) + ks8842_handle_tx(netdev, adapter); + + if (isr & IRQ_RX_OVERRUN) + ks8842_handle_rx_overrun(netdev, adapter); + + if (isr & IRQ_TX_STOPPED) { + ks8842_disable_tx(adapter); + ks8842_enable_tx(adapter); + } + + if (isr & IRQ_RX_STOPPED) { + ks8842_disable_rx(adapter); + ks8842_enable_rx(adapter); + } + + /* re-enable interrupts, put back the bank selection register */ + spin_lock_irqsave(&adapter->lock, flags); + ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER); + iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK); + spin_unlock_irqrestore(&adapter->lock, flags); +} + +static irqreturn_t ks8842_irq(int irq, void *devid) +{ + struct ks8842_adapter *adapter = devid; + u16 isr; + u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK); + irqreturn_t ret = IRQ_NONE; + + isr = ks8842_read16(adapter, 18, REG_ISR); + dev_dbg(&adapter->pdev->dev, "%s - ISR: 0x%x\n", __func__, isr); + + if (isr) { + /* disable IRQ */ + ks8842_write16(adapter, 18, 0x00, REG_IER); + + /* schedule tasklet */ + tasklet_schedule(&adapter->tasklet); + + ret = IRQ_HANDLED; + } + + iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK); + + return ret; +} + + +/* Netdevice operations */ + +static int ks8842_open(struct net_device *netdev) +{ + struct ks8842_adapter *adapter = netdev_priv(netdev); + int err; + + dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__); + + /* reset the HW */ + ks8842_reset_hw(adapter); + + ks8842_update_link_status(netdev, adapter); + + err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME, + adapter); + if (err) { + printk(KERN_ERR "Failed to request IRQ: %d: %d\n", + adapter->irq, err); + return err; + } + + return 0; +} + +static int ks8842_close(struct net_device *netdev) +{ + struct ks8842_adapter *adapter = netdev_priv(netdev); + + dev_dbg(&adapter->pdev->dev, "%s - entry\n", __func__); + + /* free the irq */ + free_irq(adapter->irq, adapter); + + /* disable the switch */ + ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE); + + return 0; +} + +static int ks8842_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + int ret; + struct ks8842_adapter *adapter = netdev_priv(netdev); + + dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); + + ret = ks8842_tx_frame(skb, netdev); + + if (ks8842_tx_fifo_space(adapter) < netdev->mtu + 8) + netif_stop_queue(netdev); + + return ret; +} + +static int ks8842_set_mac(struct net_device *netdev, void *p) +{ + struct ks8842_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + struct sockaddr *addr = p; + char *mac = (u8 *)addr->sa_data; + int i; + + dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, mac, netdev->addr_len); + + spin_lock_irqsave(&adapter->lock, flags); + for (i = 0; i < ETH_ALEN; i++) { + ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i); + ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1], + REG_MACAR1 + i); + } + spin_unlock_irqrestore(&adapter->lock, flags); + return 0; +} + +static void ks8842_tx_timeout(struct net_device *netdev) +{ + struct ks8842_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + + dev_dbg(&adapter->pdev->dev, "%s: entry\n", __func__); + + spin_lock_irqsave(&adapter->lock, flags); + /* disable interrupts */ + ks8842_write16(adapter, 18, 0, REG_IER); + ks8842_write16(adapter, 18, 0xFFFF, REG_ISR); + spin_unlock_irqrestore(&adapter->lock, flags); + + ks8842_reset_hw(adapter); + + ks8842_update_link_status(netdev, adapter); +} + +static const struct net_device_ops ks8842_netdev_ops = { + .ndo_open = ks8842_open, + .ndo_stop = ks8842_close, + .ndo_start_xmit = ks8842_xmit_frame, + .ndo_set_mac_address = ks8842_set_mac, + .ndo_tx_timeout = ks8842_tx_timeout, + .ndo_validate_addr = eth_validate_addr +}; + +static struct ethtool_ops ks8842_ethtool_ops = { + .get_link = ethtool_op_get_link, +}; + +static int __devinit ks8842_probe(struct platform_device *pdev) +{ + int err = -ENOMEM; + struct resource *iomem; + struct net_device *netdev; + struct ks8842_adapter *adapter; + u16 id; + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME)) + goto err_mem_region; + + netdev = alloc_etherdev(sizeof(struct ks8842_adapter)); + if (!netdev) + goto err_alloc_etherdev; + + SET_NETDEV_DEV(netdev, &pdev->dev); + + adapter = netdev_priv(netdev); + adapter->hw_addr = ioremap(iomem->start, resource_size(iomem)); + if (!adapter->hw_addr) + goto err_ioremap; + + adapter->irq = platform_get_irq(pdev, 0); + if (adapter->irq < 0) { + err = adapter->irq; + goto err_get_irq; + } + + adapter->pdev = pdev; + + tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev); + spin_lock_init(&adapter->lock); + + netdev->netdev_ops = &ks8842_netdev_ops; + netdev->ethtool_ops = &ks8842_ethtool_ops; + + ks8842_read_mac_addr(adapter, netdev->dev_addr); + + id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE); + + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_register; + + platform_set_drvdata(pdev, netdev); + + printk(KERN_INFO DRV_NAME + " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n", + (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7); + + return 0; + +err_register: +err_get_irq: + iounmap(adapter->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + release_mem_region(iomem->start, resource_size(iomem)); +err_mem_region: + return err; +} + +static int __devexit ks8842_remove(struct platform_device *pdev) +{ + struct net_device *netdev = platform_get_drvdata(pdev); + struct ks8842_adapter *adapter = netdev_priv(netdev); + struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + unregister_netdev(netdev); + tasklet_kill(&adapter->tasklet); + iounmap(adapter->hw_addr); + free_netdev(netdev); + release_mem_region(iomem->start, resource_size(iomem)); + platform_set_drvdata(pdev, NULL); + return 0; +} + + +static struct platform_driver ks8842_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ks8842_probe, + .remove = ks8842_remove, +}; + +static int __init ks8842_init(void) +{ + return platform_driver_register(&ks8842_platform_driver); +} + +static void __exit ks8842_exit(void) +{ + platform_driver_unregister(&ks8842_platform_driver); +} + +module_init(ks8842_init); +module_exit(ks8842_exit); + +MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver"); +MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:ks8842"); + |
