diff options
Diffstat (limited to 'drivers/net')
61 files changed, 92 insertions, 92 deletions
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index f3470d9..bab01c84 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -757,7 +757,7 @@ static void emac_shutdown(struct net_device *dev) /* Disable all interrupt */ writel(0, db->membase + EMAC_INT_CTL_REG); - /* clear interupt status */ + /* clear interrupt status */ reg_val = readl(db->membase + EMAC_INT_STA_REG); writel(reg_val, db->membase + EMAC_INT_STA_REG); diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c index 4c2ae22..94960055 100644 --- a/drivers/net/ethernet/amd/amd8111e.c +++ b/drivers/net/ethernet/amd/amd8111e.c @@ -723,13 +723,13 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget) * the last correctly noting the error. */ if(status & ERR_BIT) { - /* reseting flags */ + /* resetting flags */ lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; goto err_next_pkt; } /* check for STP and ENP */ if(!((status & STP_BIT) && (status & ENP_BIT))){ - /* reseting flags */ + /* resetting flags */ lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; goto err_next_pkt; } diff --git a/drivers/net/ethernet/amd/amd8111e.h b/drivers/net/ethernet/amd/amd8111e.h index a75092d..7cdb185 100644 --- a/drivers/net/ethernet/amd/amd8111e.h +++ b/drivers/net/ethernet/amd/amd8111e.h @@ -614,7 +614,7 @@ typedef enum { /* Assume contoller gets data 10 times the maximum processing time */ #define REPEAT_CNT 10 -/* amd8111e decriptor flag definitions */ +/* amd8111e descriptor flag definitions */ typedef enum { OWN_BIT = (1 << 15), diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index 13e8f95..1eea3e5 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -620,7 +620,7 @@ struct xgbe_hw_features { unsigned int mgk; /* PMT magic packet */ unsigned int mmc; /* RMON module */ unsigned int aoe; /* ARP Offload */ - unsigned int ts; /* IEEE 1588-2008 Adavanced Timestamp */ + unsigned int ts; /* IEEE 1588-2008 Advanced Timestamp */ unsigned int eee; /* Energy Efficient Ethernet */ unsigned int tx_coe; /* Tx Checksum Offload */ unsigned int rx_coe; /* Rx Checksum Offload */ diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c index 842fe76..7fcaf0d 100644 --- a/drivers/net/ethernet/apple/mace.c +++ b/drivers/net/ethernet/apple/mace.c @@ -720,7 +720,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id) mace_reset(dev); /* * XXX mace likes to hang the machine after a xmtfs error. - * This is hard to reproduce, reseting *may* help + * This is hard to reproduce, resetting *may* help */ } cp = mp->tx_cmds + NCMDS_TX * i; diff --git a/drivers/net/ethernet/apple/macmace.c b/drivers/net/ethernet/apple/macmace.c index 6e66127..89914ca 100644 --- a/drivers/net/ethernet/apple/macmace.c +++ b/drivers/net/ethernet/apple/macmace.c @@ -575,7 +575,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id) mace_reset(dev); /* * XXX mace likes to hang the machine after a xmtfs error. - * This is hard to reproduce, reseting *may* help + * This is hard to reproduce, resetting *may* help */ } /* dma should have finished */ diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index 52fdfe2..a8b80c5 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c @@ -307,7 +307,7 @@ void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel) /* * atl1c_read_phy_core - * core funtion to read register in PHY via MDIO control regsiter. + * core function to read register in PHY via MDIO control regsiter. * ext: extension register (see IEEE 802.3) * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0) * reg: reg to read @@ -356,7 +356,7 @@ int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, /* * atl1c_write_phy_core - * core funtion to write to register in PHY via MDIO control regsiter. + * core function to write to register in PHY via MDIO control register. * ext: extension register (see IEEE 802.3) * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0) * reg: reg to write diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 587f63e..932bd18 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -752,7 +752,7 @@ static void atl1c_patch_assign(struct atl1c_hw *hw) if (hw->device_id == PCI_DEVICE_ID_ATHEROS_L2C_B2 && hw->revision_id == L2CB_V21) { - /* config acess mode */ + /* config access mode */ pci_write_config_dword(pdev, REG_PCIE_IND_ACC_ADDR, REG_PCIE_DEV_MISC_CTRL); pci_read_config_dword(pdev, REG_PCIE_IND_ACC_DATA, &misc_ctrl); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h index bd90e50..d6e1975 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -278,7 +278,7 @@ static inline void bnx2x_dcb_config_qm(struct bnx2x *bp, enum cos_mode mode, } -/* congestion managment port init api description +/* congestion management port init api description * the api works as follows: * the driver should pass the cmng_init_input struct, the port_init function * will prepare the required internal ram structure which will be passed back diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 778e4cd..b7c77b2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -563,7 +563,7 @@ static void bnx2x_ets_e3b0_set_credit_upper_bound_nig( * Will return the NIG ETS registers to init values.Except * credit_upper_bound. * That isn't used in this configuration (No WFQ is enabled) and will be -* configured acording to spec +* configured according to spec *. ******************************************************************************/ static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params, @@ -680,7 +680,7 @@ static void bnx2x_ets_e3b0_set_credit_upper_bound_pbf( * Will return the PBF ETS registers to init values.Except * credit_upper_bound. * That isn't used in this configuration (No WFQ is enabled) and will be -* configured acording to spec +* configured according to spec *. ******************************************************************************/ static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params) @@ -738,7 +738,7 @@ static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params) } /****************************************************************************** * Description: -* E3B0 disable will return basicly the values to init values. +* E3B0 disable will return basically the values to init values. *. ******************************************************************************/ static int bnx2x_ets_e3b0_disabled(const struct link_params *params, @@ -761,7 +761,7 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params, /****************************************************************************** * Description: -* Disable will return basicly the values to init values. +* Disable will return basically the values to init values. * ******************************************************************************/ int bnx2x_ets_disabled(struct link_params *params, @@ -2938,7 +2938,7 @@ static int bnx2x_eee_initial_config(struct link_params *params, { vars->eee_status |= ((u32) mode) << SHMEM_EEE_SUPPORTED_SHIFT; - /* Propogate params' bits --> vars (for migration exposure) */ + /* Propagate params' bits --> vars (for migration exposure) */ if (params->eee_mode & EEE_MODE_ENABLE_LPI) vars->eee_status |= SHMEM_EEE_LPI_REQUESTED_BIT; else @@ -13308,7 +13308,7 @@ static void bnx2x_check_over_curr(struct link_params *params, vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG; } -/* Returns 0 if no change occured since last check; 1 otherwise. */ +/* Returns 0 if no change occurred since last check; 1 otherwise. */ static u8 bnx2x_analyze_link_error(struct link_params *params, struct link_vars *vars, u32 status, u32 phy_flag, u32 link_flag, u8 notify) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 6fe547c..0770e4b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -29,7 +29,7 @@ #define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1) /* [RW 1] Initiate the ATC array - reset all the valid bits */ #define ATC_REG_ATC_INIT_ARRAY 0x1100b8 -/* [R 1] ATC initalization done */ +/* [R 1] ATC initialization done */ #define ATC_REG_ATC_INIT_DONE 0x1100bc /* [RC 6] Interrupt register #0 read clear */ #define ATC_REG_ATC_INT_STS_CLR 0x1101c0 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index d160829..612cafb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -1620,7 +1620,7 @@ void bnx2x_memset_stats(struct bnx2x *bp) if (bp->port.pmf && bp->port.port_stx) bnx2x_port_stats_base_init(bp); - /* mark the end of statistics initializiation */ + /* mark the end of statistics initialization */ bp->stats_init = false; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index be40eab..15b2d16 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -800,7 +800,7 @@ int bnx2x_vfpf_config_rss(struct bnx2x *bp, req->rss_key_size = T_ETH_RSS_KEY; req->rss_result_mask = params->rss_result_mask; - /* flags handled individually for backward/forward compatability */ + /* flags handled individually for backward/forward compatibility */ if (params->rss_flags & (1 << BNX2X_RSS_MODE_DISABLED)) req->rss_flags |= VFPF_RSS_MODE_DISABLED; if (params->rss_flags & (1 << BNX2X_RSS_MODE_REGULAR)) @@ -1869,7 +1869,7 @@ static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf, rss.rss_obj = &vf->rss_conf_obj; rss.rss_result_mask = rss_tlv->rss_result_mask; - /* flags handled individually for backward/forward compatability */ + /* flags handled individually for backward/forward compatibility */ rss.rss_flags = 0; rss.ramrod_flags = 0; diff --git a/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h index 63e300f..a37326d 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h +++ b/drivers/net/ethernet/brocade/bna/bfa_defs_cna.h @@ -135,7 +135,7 @@ struct bfa_cee_lldp_str { u8 value[BFA_CEE_LLDP_MAX_STRING_LEN]; }; -/* LLDP paramters */ +/* LLDP parameters */ struct bfa_cee_lldp_cfg { struct bfa_cee_lldp_str chassis_id; struct bfa_cee_lldp_str port_id; diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c index f2d1323..594a2ab 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -1340,7 +1340,7 @@ bfa_ioc_fwver_md5_check(struct bfi_ioc_image_hdr *fwhdr_1, return true; } -/* Returns TRUE if major minor and maintainence are same. +/* Returns TRUE if major minor and maintenance are same. * If patch version are same, check for MD5 Checksum to be same. */ static bool diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c index 66c8507..2e72445 100644 --- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c @@ -699,7 +699,7 @@ bfa_ioc_ct2_sclk_init(void __iomem *rb) /* * Ignore mode and program for the max clock (which is FC16) - * Firmware/NFC will do the PLL init appropiately + * Firmware/NFC will do the PLL init appropriately */ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG)); r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2); diff --git a/drivers/net/ethernet/brocade/bna/bfi.h b/drivers/net/ethernet/brocade/bna/bfi.h index f1e1129..2bcde40 100644 --- a/drivers/net/ethernet/brocade/bna/bfi.h +++ b/drivers/net/ethernet/brocade/bna/bfi.h @@ -159,8 +159,8 @@ enum bfi_asic_gen { }; enum bfi_asic_mode { - BFI_ASIC_MODE_FC = 1, /* FC upto 8G speed */ - BFI_ASIC_MODE_FC16 = 2, /* FC upto 16G speed */ + BFI_ASIC_MODE_FC = 1, /* FC up to 8G speed */ + BFI_ASIC_MODE_FC16 = 2, /* FC up to 16G speed */ BFI_ASIC_MODE_ETH = 3, /* Ethernet ports */ BFI_ASIC_MODE_COMBO = 4, /* FC 16G and Ethernet 10G port */ }; diff --git a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h index c5feab1..174af0e 100644 --- a/drivers/net/ethernet/brocade/bna/bna_hw_defs.h +++ b/drivers/net/ethernet/brocade/bna/bna_hw_defs.h @@ -363,7 +363,7 @@ struct bna_txq_wi_vector { /* TxQ Entry Structure * - * BEWARE: Load values into this structure with correct endianess. + * BEWARE: Load values into this structure with correct endianness. */ struct bna_txq_entry { union { diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 47bfea2..63efa0d 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -47,9 +47,9 @@ #define XGMAC_REMOTE_WAKE 0x00000700 /* Remote Wake-Up Frm Filter */ #define XGMAC_PMT 0x00000704 /* PMT Control and Status */ #define XGMAC_MMC_CTRL 0x00000800 /* XGMAC MMC Control */ -#define XGMAC_MMC_INTR_RX 0x00000804 /* Recieve Interrupt */ +#define XGMAC_MMC_INTR_RX 0x00000804 /* Receive Interrupt */ #define XGMAC_MMC_INTR_TX 0x00000808 /* Transmit Interrupt */ -#define XGMAC_MMC_INTR_MASK_RX 0x0000080c /* Recieve Interrupt Mask */ +#define XGMAC_MMC_INTR_MASK_RX 0x0000080c /* Receive Interrupt Mask */ #define XGMAC_MMC_INTR_MASK_TX 0x00000810 /* Transmit Interrupt Mask */ /* Hardware TX Statistics Counters */ @@ -153,7 +153,7 @@ #define XGMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ #define XGMAC_FLOW_CTRL_PT_SHIFT 16 #define XGMAC_FLOW_CTRL_DZQP 0x00000080 /* Disable Zero-Quanta Phase */ -#define XGMAC_FLOW_CTRL_PLT 0x00000020 /* Pause Low Threshhold */ +#define XGMAC_FLOW_CTRL_PLT 0x00000020 /* Pause Low Threshold */ #define XGMAC_FLOW_CTRL_PLT_MASK 0x00000030 /* PLT MASK */ #define XGMAC_FLOW_CTRL_UP 0x00000008 /* Unicast Pause Frame Detect */ #define XGMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ @@ -254,18 +254,18 @@ /* XGMAC Operation Mode Register */ #define XGMAC_OMR_TSF 0x00200000 /* TX FIFO Store and Forward */ #define XGMAC_OMR_FTF 0x00100000 /* Flush Transmit FIFO */ -#define XGMAC_OMR_TTC 0x00020000 /* Transmit Threshhold Ctrl */ +#define XGMAC_OMR_TTC 0x00020000 /* Transmit Threshold Ctrl */ #define XGMAC_OMR_TTC_MASK 0x00030000 -#define XGMAC_OMR_RFD 0x00006000 /* FC Deactivation Threshhold */ -#define XGMAC_OMR_RFD_MASK 0x00007000 /* FC Deact Threshhold MASK */ -#define XGMAC_OMR_RFA 0x00000600 /* FC Activation Threshhold */ -#define XGMAC_OMR_RFA_MASK 0x00000E00 /* FC Act Threshhold MASK */ +#define XGMAC_OMR_RFD 0x00006000 /* FC Deactivation Threshold */ +#define XGMAC_OMR_RFD_MASK 0x00007000 /* FC Deact Threshold MASK */ +#define XGMAC_OMR_RFA 0x00000600 /* FC Activation Threshold */ +#define XGMAC_OMR_RFA_MASK 0x00000E00 /* FC Act Threshold MASK */ #define XGMAC_OMR_EFC 0x00000100 /* Enable Hardware FC */ #define XGMAC_OMR_FEF 0x00000080 /* Forward Error Frames */ #define XGMAC_OMR_DT 0x00000040 /* Drop TCP/IP csum Errors */ #define XGMAC_OMR_RSF 0x00000020 /* RX FIFO Store and Forward */ -#define XGMAC_OMR_RTC_256 0x00000018 /* RX Threshhold Ctrl */ -#define XGMAC_OMR_RTC_MASK 0x00000018 /* RX Threshhold Ctrl MASK */ +#define XGMAC_OMR_RTC_256 0x00000018 /* RX Threshold Ctrl */ +#define XGMAC_OMR_RTC_MASK 0x00000018 /* RX Threshold Ctrl MASK */ /* XGMAC HW Features Register */ #define DMA_HW_FEAT_TXCOESEL 0x00010000 /* TX Checksum offload */ diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c index 184a8d5..a22768c 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c @@ -840,7 +840,7 @@ static int flash_wait_op(struct adapter *adapter, int attempts, int delay) * Read the specified number of 32-bit words from the serial flash. * If @byte_oriented is set the read data is stored as a byte array * (i.e., big-endian), otherwise as 32-bit words in the platform's - * natural endianess. + * natural endianness. */ static int t3_read_flash(struct adapter *adapter, unsigned int addr, unsigned int nwords, u32 *data, int byte_oriented) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index e344bdc..4af8a9f 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5366,7 +5366,7 @@ static int adap_init0(struct adapter *adap) adap->tids.stid_base = val[1]; adap->tids.nstids = val[2] - val[1] + 1; /* - * Setup server filter region. Divide the availble filter + * Setup server filter region. Divide the available filter * region into two parts. Regular filters get 1/3rd and server * filters get 2/3rd part. This is only enabled if workarond * path is enabled. diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 853c389..1498d07 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -867,7 +867,7 @@ static int flash_wait_op(struct adapter *adapter, int attempts, int delay) * Read the specified number of 32-bit words from the serial flash. * If @byte_oriented is set the read data is stored as a byte array * (i.e., big-endian), otherwise as 32-bit words in the platform's - * natural endianess. + * natural endianness. */ int t4_read_flash(struct adapter *adapter, unsigned int addr, unsigned int nwords, u32 *data, int byte_oriented) @@ -3558,7 +3558,7 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, * For the single-MTU buffers in unpacked mode we need to include * space for the SGE Control Packet Shift, 14 byte Ethernet header, * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet - * Padding boundry. All of these are accommodated in the Factory + * Padding boundary. All of these are accommodated in the Factory * Default Firmware Configuration File but we need to adjust it for * this host's cache line size. */ @@ -4529,7 +4529,7 @@ int t4_init_tp_params(struct adapter *adap) PROTOCOL_F); /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID - * represents the presense of an Outer VLAN instead of a VNIC ID. + * represents the presence of an Outer VLAN instead of a VNIC ID. */ if ((adap->params.tp.ingress_config & VNIC_F) == 0) adap->params.tp.vnic_shift = -1; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index 9b353a8..d136ca6 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -36,7 +36,7 @@ #define _T4FW_INTERFACE_H_ enum fw_retval { - FW_SUCCESS = 0, /* completed sucessfully */ + FW_SUCCESS = 0, /* completed successfully */ FW_EPERM = 1, /* operation not permitted */ FW_ENOENT = 2, /* no such file or directory */ FW_EIO = 5, /* input/output error; hw bad */ diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 0545f0d..5ba14b3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -875,7 +875,7 @@ static inline unsigned int calc_tx_flits(const struct sk_buff *skb) * Write Header (incorporated as part of the cpl_tx_pkt_lso and * cpl_tx_pkt structures), followed by either a TX Packet Write CPL * message or, if we're doing a Large Send Offload, an LSO CPL message - * with an embeded TX Packet Write CPL message. + * with an embedded TX Packet Write CPL message. */ flits = sgl_len(skb_shinfo(skb)->nr_frags + 1); if (skb_shinfo(skb)->gso_size) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 1b5506d..c21e2e9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -339,7 +339,7 @@ int t4vf_port_init(struct adapter *adapter, int pidx) * @adapter: the adapter * * Issues a reset command to FW. For a Physical Function this would - * result in the Firmware reseting all of its state. For a Virtual + * result in the Firmware resetting all of its state. For a Virtual * Function this just resets the state associated with the VF. */ int t4vf_fw_reset(struct adapter *adapter) diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index d1c025f..6038304 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1578,7 +1578,7 @@ out1: #ifndef CONFIG_CS89x0_PLATFORM /* - * This function converts the I/O port addres used by the cs89x0_probe() and + * This function converts the I/O port address used by the cs89x0_probe() and * init_module() functions to the I/O memory address used by the * cs89x0_probe1() function. */ diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c index 50a0077..afd8e78 100644 --- a/drivers/net/ethernet/dec/tulip/dmfe.c +++ b/drivers/net/ethernet/dec/tulip/dmfe.c @@ -653,7 +653,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev) if ( !(db->media_mode & DMFE_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initialize Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive descriptor and CR3/4 */ dmfe_descriptor_init(dev); /* Init CR6 to program DM910x operation */ diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c index 1c5916b..2c30c0c 100644 --- a/drivers/net/ethernet/dec/tulip/uli526x.c +++ b/drivers/net/ethernet/dec/tulip/uli526x.c @@ -564,7 +564,7 @@ static void uli526x_init(struct net_device *dev) if ( !(db->media_mode & ULI526X_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initialize Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive descriptor and CR3/4 */ uli526x_descriptor_init(dev, ioaddr); /* Init CR6 to program M526X operation */ diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 75cb461..dc27839 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -3021,7 +3021,7 @@ int be_cmd_get_mac_from_list(struct be_adapter *adapter, u8 *mac, mac_count = resp->true_mac_count + resp->pseudo_mac_count; /* Mac list returned could contain one or more active mac_ids - * or one or more true or pseudo permanant mac addresses. + * or one or more true or pseudo permanent mac addresses. * If an active mac_id is present, return first active mac_id * found. */ diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 1f9cf23..4585895 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -136,7 +136,7 @@ static int fec_ptp_enable_pps(struct fec_enet_private *fep, uint enable) */ writel(FEC_T_TF_MASK, fep->hwp + FEC_TCSR(fep->pps_channel)); - /* It is recommended to doulbe check the TMODE field in the + /* It is recommended to double check the TMODE field in the * TCSR register to be cleared before the first compare counter * is written into TCCR register. Just add a double check. */ diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index e9c3a87..05f8839 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -414,7 +414,7 @@ enum cb_status { /** * cb_command - Command Block flags - * @cb_tx_nc: 0: controler does CRC (normal), 1: CRC from skb memory + * @cb_tx_nc: 0: controller does CRC (normal), 1: CRC from skb memory */ enum cb_command { cb_nop = 0x0000, diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 73c98d3..b548ef0 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1116,7 +1116,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (e1000_read_mac_addr(hw)) e_err(probe, "EEPROM Read Error\n"); } - /* don't block initalization here due to bad MAC address */ + /* don't block initialization here due to bad MAC address */ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->dev_addr)) diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 8537416..f44911d 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -2009,7 +2009,7 @@ static int i40evf_check_reset_complete(struct i40e_hw *hw) * * This task completes the work that was begun in probe. Due to the nature * of VF-PF communications, we may need to wait tens of milliseconds to get - * reponses back from the PF. Rather than busy-wait in probe and bog down the + * responses back from the PF. Rather than busy-wait in probe and bog down the * whole system, we'll do it in a task so we can sleep. * This task only runs during driver init. Once we've established * communications with the PF driver and set up our netdev, the watchdog @@ -2400,7 +2400,7 @@ static int i40evf_suspend(struct pci_dev *pdev, pm_message_t state) } /** - * i40evf_resume - Power managment resume routine + * i40evf_resume - Power management resume routine * @pdev: PCI device information struct * * Called when the system (VM) is resumed from sleep/suspend. diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index d6be4c69..52d01b8 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -30,7 +30,7 @@ * * Neither the 82576 nor the 82580 offer registers wide enough to hold * nanoseconds time values for very long. For the 82580, SYSTIM always - * counts nanoseconds, but the upper 24 bits are not availible. The + * counts nanoseconds, but the upper 24 bits are not available. The * frequency is adjusted by changing the 32 bit fractional nanoseconds * register, TIMINCA. * diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 903664f..21aea7e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2609,7 +2609,7 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data) eicr = IXGBE_READ_REG(hw, IXGBE_EICS); /* The lower 16bits of the EICR register are for the queue interrupts - * which should be masked here in order to not accidently clear them if + * which should be masked here in order to not accidentally clear them if * the bits are high when ixgbe_msix_other is called. There is a race * condition otherwise which results in possible performance loss * especially if the ixgbe_msix_other interrupt is triggering diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 79c00f5..bd46f5d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -488,7 +488,7 @@ static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter) * @work: pointer to the work struct * * This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware - * timestamp has been taken for the current skb. It is necesary, because the + * timestamp has been taken for the current skb. It is necessary, because the * descriptor's "done" bit does not correlate with the timestamp event. */ static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 7f37fe7..09a291b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -141,7 +141,7 @@ void ixgbe_enable_sriov(struct ixgbe_adapter *adapter) * The 82599 supports up to 64 VFs per physical function * but this implementation limits allocation to 63 so that * basic networking resources are still available to the - * physical function. If the user requests greater thn + * physical function. If the user requests greater than * 63 VFs then it is an error - reset to default of zero. */ adapter->num_vfs = min_t(unsigned int, adapter->num_vfs, IXGBE_MAX_VFS_DRV_LIMIT); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index fc5ecee5..8451f9a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1690,7 +1690,7 @@ enum { #define IXGBE_MACC_FS 0x00040000 #define IXGBE_MAC_RX2TX_LPBK 0x00000002 -/* Veto Bit definiton */ +/* Veto Bit definition */ #define IXGBE_MMNGC_MNG_VETO 0x00000001 /* LINKS Bit Masks */ diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c index cdb53be..f510a58 100644 --- a/drivers/net/ethernet/intel/ixgbevf/vf.c +++ b/drivers/net/ethernet/intel/ixgbevf/vf.c @@ -65,7 +65,7 @@ static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw) * ixgbevf_reset_hw_vf - Performs hardware reset * @hw: pointer to hardware structure * - * Resets the hardware by reseting the transmit and receive units, masks and + * Resets the hardware by resetting the transmit and receive units, masks and * clears all interrupts. **/ static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw) diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index fdf3e38..3e8b1bf 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -1423,7 +1423,7 @@ static void mvpp2_prs_mac_promisc_set(struct mvpp2 *priv, int port, bool add) { struct mvpp2_prs_entry pe; - /* Promiscous mode - Accept unknown packets */ + /* Promiscuous mode - Accept unknown packets */ if (priv->prs_shadow[MVPP2_PE_MAC_PROMISCUOUS].valid) { /* Entry exist - update port only */ @@ -3402,7 +3402,7 @@ static void mvpp2_bm_bufs_free(struct mvpp2 *priv, struct mvpp2_bm_pool *bm_pool for (i = 0; i < bm_pool->buf_num; i++) { u32 vaddr; - /* Get buffer virtual adress (indirect access) */ + /* Get buffer virtual address (indirect access) */ mvpp2_read(priv, MVPP2_BM_PHY_ALLOC_REG(bm_pool->id)); vaddr = mvpp2_read(priv, MVPP2_BM_VIRT_ALLOC_REG); if (!vaddr) diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 1409d0cd6..0b16db0 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -175,7 +175,7 @@ enum mlx4_res_tracker_free_type { /* *Virtual HCR structures. - * mlx4_vhcr is the sw representation, in machine endianess + * mlx4_vhcr is the sw representation, in machine endianness * * mlx4_vhcr_cmd is the formalized structure, the one that is passed * to FW to go through communication channel. diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index d97ca88..d43e259 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -3027,7 +3027,7 @@ int mlx4_WRITE_MTT_wrapper(struct mlx4_dev *dev, int slave, /* Call the SW implementation of write_mtt: * - Prepare a dummy mtt struct - * - Translate inbox contents to simple addresses in host endianess */ + * - Translate inbox contents to simple addresses in host endianness */ mtt.offset = 0; /* TBD this is broken but I don't handle it since we don't really use it */ mtt.order = 0; diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index 6c72e74..81d0f1c 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -150,7 +150,7 @@ static void moxart_mac_setup_desc_ring(struct net_device *ndev) priv->rx_head = 0; - /* reset the MAC controler TX/RX desciptor base address */ + /* reset the MAC controller TX/RX desciptor base address */ writel(priv->tx_base, priv->base + REG_TXR_BASE_ADDRESS); writel(priv->rx_base, priv->base + REG_RXR_BASE_ADDRESS); } diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index a4cdf2f..092dcae 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -1343,7 +1343,7 @@ static int init_nic(struct s2io_nic *nic) TX_PA_CFG_IGNORE_L2_ERR; writeq(val64, &bar0->tx_pa_cfg); - /* Rx DMA intialization. */ + /* Rx DMA initialization. */ val64 = 0; for (i = 0; i < config->rx_ring_num; i++) { struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c index 4fe8ea9..f6fcf74 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c @@ -394,7 +394,7 @@ static void pch_gbe_get_pauseparam(struct net_device *netdev, } /** - * pch_gbe_set_pauseparam - Set pause paramters + * pch_gbe_set_pauseparam - Set pause parameters * @netdev: Network interface device structure * @pause: Pause parameters structure * Returns: diff --git a/drivers/net/ethernet/packetengines/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c index 319d9d4..13d88a6 100644 --- a/drivers/net/ethernet/packetengines/hamachi.c +++ b/drivers/net/ethernet/packetengines/hamachi.c @@ -350,7 +350,7 @@ V. Recent Changes incorrectly defined and corrected (as per Michel Mueller). 02/23/1999 EPK Corrected the Tx full check to check that at least 4 slots - were available before reseting the tbusy and tx_full flags + were available before resetting the tbusy and tx_full flags (as per Michel Mueller). 03/11/1999 EPK Added Pete Wyckoff's hardware checksumming support. diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index f3346a3..69f828e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -205,7 +205,7 @@ struct qlcnic_add_rings_mbx_out { * @phys_addr_{low|high}: DMA address of the transmit buffer * @cnsmr_index_{low|high}: host consumer index * @size: legth of transmit buffer ring - * @intr_id: interrput id + * @intr_id: interrupt id * @src: src of interrupt */ struct qlcnic_tx_mbx { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 2bb48d5..33669c2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -269,7 +269,7 @@ static int qlcnic_83xx_idc_clear_registers(struct qlcnic_adapter *adapter, } QLCWRX(adapter->ahw, QLC_83XX_IDC_DRV_ACK, 0); - /* Clear gracefull reset bit */ + /* Clear graceful reset bit */ val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); val &= ~QLC_83XX_IDC_GRACEFULL_RESET; QLCWRX(adapter->ahw, QLC_83XX_IDC_CTRL, val); @@ -889,7 +889,7 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) * @adapter: adapter structure * * Device will remain in this state until: - * Reset request ACK's are recieved from all the functions + * Reset request ACK's are received from all the functions * Wait time exceeds max time limit * * Returns: Error code or Success(0) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 2c811f6..4a42e96 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -571,7 +571,7 @@ qcaspi_spi_thread(void *data) } /* can only handle other interrupts - * if sync has occured + * if sync has occurred */ if (qca->sync == QCASPI_SYNC_READY) { if (intr_cause & SPI_INT_PKT_AVLBL) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index c8a01ee..413ea14a 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -422,11 +422,11 @@ static int init_tx_ring(struct device *dev, u8 queue_no, /* assign queue number */ tx_ring->queue_no = queue_no; - /* initalise counters */ + /* initialise counters */ tx_ring->dirty_tx = 0; tx_ring->cur_tx = 0; - /* initalise TX queue lock */ + /* initialise TX queue lock */ spin_lock_init(&tx_ring->tx_lock); return 0; @@ -515,7 +515,7 @@ static int init_rx_ring(struct net_device *dev, u8 queue_no, goto err_free_rx_buffers; } - /* initalise counters */ + /* initialise counters */ rx_ring->cur_rx = 0; rx_ring->dirty_rx = (unsigned int)(desc_index - rx_rsize); priv->dma_buf_sz = bfsize; @@ -837,7 +837,7 @@ static void sxgbe_restart_tx_queue(struct sxgbe_priv_data *priv, int queue_num) /* free the skbuffs of the ring */ tx_free_ring_skbufs(tx_ring); - /* initalise counters */ + /* initialise counters */ tx_ring->cur_tx = 0; tx_ring->dirty_tx = 0; @@ -1176,7 +1176,7 @@ static int sxgbe_open(struct net_device *dev) if (priv->phydev) phy_start(priv->phydev); - /* initalise TX coalesce parameters */ + /* initialise TX coalesce parameters */ sxgbe_tx_init_coalesce(priv); if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { @@ -1721,7 +1721,7 @@ static inline u64 sxgbe_get_stat64(void __iomem *ioaddr, int reg_lo, int reg_hi) * Description: * This function is a driver entry point whenever ifconfig command gets * executed to see device statistics. Statistics are number of - * bytes sent or received, errors occured etc. + * bytes sent or received, errors occurred etc. * Return value: * This function returns various statistical information of device. */ diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 2384824..33d2f9a 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -3215,7 +3215,7 @@ static pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev, return status; } -/* Fake a successfull reset, which will be performed later in efx_io_resume. */ +/* Fake a successful reset, which will be performed later in efx_io_resume. */ static pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev) { struct efx_nic *efx = pci_get_drvdata(pdev); diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c index 7597532..bb89e96 100644 --- a/drivers/net/ethernet/sfc/farch.c +++ b/drivers/net/ethernet/sfc/farch.c @@ -645,7 +645,7 @@ static bool efx_check_tx_flush_complete(struct efx_nic *efx) } /* Flush all the transmit queues, and continue flushing receive queues until - * they're all flushed. Wait for the DRAIN events to be recieved so that there + * they're all flushed. Wait for the DRAIN events to be received so that there * are no more RX and TX events left on any channel. */ static int efx_farch_do_flush(struct efx_nic *efx) { @@ -1108,7 +1108,7 @@ efx_farch_handle_tx_flush_done(struct efx_nic *efx, efx_qword_t *event) } /* If this flush done event corresponds to a &struct efx_rx_queue: If the flush - * was succesful then send an %EFX_CHANNEL_MAGIC_RX_DRAIN, otherwise add + * was successful then send an %EFX_CHANNEL_MAGIC_RX_DRAIN, otherwise add * the RX queue back to the mask of RX queues in need of flushing. */ static void diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h index a707fb5..e028de1 100644 --- a/drivers/net/ethernet/sfc/mcdi_pcol.h +++ b/drivers/net/ethernet/sfc/mcdi_pcol.h @@ -6497,7 +6497,7 @@ #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMIN 12 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMAX 252 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LEN(num) (0+12*(num)) -/* Raw buffer table entries, layed out as BUFTBL_ENTRY. */ +/* Raw buffer table entries, laid out as BUFTBL_ENTRY. */ #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_OFST 0 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_LEN 12 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MINNUM 1 diff --git a/drivers/net/ethernet/sfc/siena_sriov.c b/drivers/net/ethernet/sfc/siena_sriov.c index a8bbbad..fe83430 100644 --- a/drivers/net/ethernet/sfc/siena_sriov.c +++ b/drivers/net/ethernet/sfc/siena_sriov.c @@ -1067,7 +1067,7 @@ void efx_siena_sriov_probe(struct efx_nic *efx) } /* Copy the list of individual addresses into the vfdi_status.peers - * array and auxillary pages, protected by %local_lock. Drop that lock + * array and auxiliary pages, protected by %local_lock. Drop that lock * and then broadcast the address list to every VF. */ static void efx_siena_sriov_peer_work(struct work_struct *data) diff --git a/drivers/net/ethernet/sfc/vfdi.h b/drivers/net/ethernet/sfc/vfdi.h index ae044f4..f62901d 100644 --- a/drivers/net/ethernet/sfc/vfdi.h +++ b/drivers/net/ethernet/sfc/vfdi.h @@ -98,7 +98,7 @@ struct vfdi_endpoint { * @VFDI_OP_INIT_TXQ: Initialize SRAM entries and initialize a TXQ. * @VFDI_OP_FINI_ALL_QUEUES: Flush all queues, finalize all queues, then * finalize the SRAM entries. - * @VFDI_OP_INSERT_FILTER: Insert a MAC filter targetting the given RXQ. + * @VFDI_OP_INSERT_FILTER: Insert a MAC filter targeting the given RXQ. * @VFDI_OP_REMOVE_ALL_FILTERS: Remove all filters. * @VFDI_OP_SET_STATUS_PAGE: Set the DMA page(s) used for status updates * from PF and write the initial status. @@ -148,7 +148,7 @@ enum vfdi_op { * @u.init_txq.flags: Checksum offload flags. * @u.init_txq.addr: Array of length %u.init_txq.buf_count containing DMA * address of each page backing the transmit queue. - * @u.mac_filter.rxq: Insert MAC filter at VF local address/VLAN targetting + * @u.mac_filter.rxq: Insert MAC filter at VF local address/VLAN targeting * all traffic at this receive queue. * @u.mac_filter.flags: MAC filter flags. * @u.set_status_page.dma_addr: Base address for the &struct vfdi_status. diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a0ea84f..5336594 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -609,7 +609,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) * where, freq_div_ratio = clk_ptp_ref_i/50MHz * hence, addend = ((2^32) * 50MHz)/clk_ptp_ref_i; * NOTE: clk_ptp_ref_i should be >= 50MHz to - * achive 20ns accuracy. + * achieve 20ns accuracy. * * 2^x * y == (y << x), hence * 2^32 * 50000000 ==> (50000000 << 32) diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index fef5dec..74e9b14 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -2175,7 +2175,7 @@ static int gem_do_start(struct net_device *dev) } /* Mark us as attached again if we come from resume(), this has - * no effect if we weren't detatched and needs to be done now. + * no effect if we weren't detached and needs to be done now. */ netif_device_attach(dev); @@ -2794,7 +2794,7 @@ static void gem_remove_one(struct pci_dev *pdev) unregister_netdev(dev); - /* Ensure reset task is truely gone */ + /* Ensure reset task is truly gone */ cancel_work_sync(&gp->reset_task); /* Free resources */ diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index a1bbaf6..b536b4c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -726,7 +726,7 @@ static void cpsw_rx_handler(void *token, int len, int status) if (ndev_status && (status >= 0)) { /* The packet received is for the interface which * is already down and the other interface is up - * and running, intead of freeing which results + * and running, instead of freeing which results * in reducing of the number of rx descriptor in * DMA engine, requeue skb back to cpdma. */ diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c index bb79928..ac62a5e 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c @@ -1065,7 +1065,7 @@ refill: /* * this call can fail, but for now, just leave this - * decriptor without skb + * descriptor without skb */ gelic_descr_prepare_rx(card, descr); diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c index a495931..f5498c2 100644 --- a/drivers/net/ethernet/wiznet/w5100.c +++ b/drivers/net/ethernet/wiznet/w5100.c @@ -56,7 +56,7 @@ MODULE_LICENSE("GPL"); #define W5100_S0_REGS 0x0400 #define W5100_S0_MR 0x0400 /* S0 Mode Register */ -#define S0_MR_MACRAW 0x04 /* MAC RAW mode (promiscous) */ +#define S0_MR_MACRAW 0x04 /* MAC RAW mode (promiscuous) */ #define S0_MR_MACRAW_MF 0x44 /* MAC RAW mode (filtered) */ #define W5100_S0_CR 0x0401 /* S0 Command Register */ #define S0_CR_OPEN 0x01 /* OPEN command */ diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c index 09322d9..ca0c631 100644 --- a/drivers/net/ethernet/wiznet/w5300.c +++ b/drivers/net/ethernet/wiznet/w5300.c @@ -63,7 +63,7 @@ MODULE_LICENSE("GPL"); #define IDR_W5300 0x5300 /* =0x5300 for WIZnet W5300 */ #define W5300_S0_MR 0x0200 /* S0 Mode Register */ #define S0_MR_CLOSED 0x0000 /* Close mode */ -#define S0_MR_MACRAW 0x0004 /* MAC RAW mode (promiscous) */ +#define S0_MR_MACRAW 0x0004 /* MAC RAW mode (promiscuous) */ #define S0_MR_MACRAW_MF 0x0044 /* MAC RAW mode (filtered) */ #define W5300_S0_CR 0x0202 /* S0 Command Register */ #define S0_CR_OPEN 0x0001 /* OPEN command */ |