11 files changed, 29 insertions, 26 deletions
diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig
index abf4d7a..60c2142 100644
--- a/drivers/net/caif/Kconfig
+++ b/drivers/net/caif/Kconfig
@@ -6,7 +6,7 @@ comment "CAIF transport drivers"
 
 config CAIF_TTY
 	tristate "CAIF TTY transport driver"
-	depends on CAIF
+	depends on CAIF && TTY
 	default n
 	---help---
 	The CAIF TTY transport driver is a Line Discipline (ldisc)
diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index 5de74e7..666891a 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -91,7 +91,7 @@ static inline void update_tty_status(struct ser_device *ser)
 		ser->tty->hw_stopped << 4 |
 		ser->tty->flow_stopped << 3 |
 		ser->tty->packet << 2 |
-		ser->tty->low_latency << 1 |
+		ser->tty->port->low_latency << 1 |
 		ser->tty->warned;
 }
 static inline void debugfs_init(struct ser_device *ser, struct tty_struct *tty)
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 1cca19f..9862b2e 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -11,6 +11,7 @@ config CAN_VCAN
 
 config CAN_SLCAN
 	tristate "Serial / USB serial CAN Adaptors (slcan)"
+	depends on TTY
 	---help---
 	  CAN driver for several 'low cost' CAN interfaces that are attached
 	  via serial lines or via USB-to-serial adapters using the LAWICEL
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 95dbcfd..bf5e596 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -1,6 +1,6 @@
 config MKISS
 	tristate "Serial port KISS driver"
-	depends on AX25
+	depends on AX25 && TTY
 	select CRC16
 	---help---
 	  KISS is a protocol used for the exchange of data between a computer
@@ -18,7 +18,7 @@ config MKISS
 
 config 6PACK
 	tristate "Serial port 6PACK driver"
-	depends on AX25
+	depends on AX25 && TTY
 	---help---
 	  6pack is a transmission protocol for the data exchange between your
 	  PC and your TNC (the Terminal Node Controller acts as a kind of
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 59e9d9e..2a30193 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -5,7 +5,7 @@ comment "SIR device drivers"
 
 config IRTTY_SIR
 	tristate "IrTTY (uses Linux serial driver)"
-	depends on IRDA
+	depends on IRDA && TTY
 	help
 	  Say Y here if you want to build support for the IrTTY line
 	  discipline.  To compile it as a module, choose M here: the module
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 6e4d4b6..a412671 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -210,7 +210,7 @@ static int irtty_do_write(struct sir_dev *dev, const unsigned char *ptr, size_t
  *    been received, which can now be decapsulated and delivered for
  *    further processing 
  *
- * calling context depends on underlying driver and tty->low_latency!
+ * calling context depends on underlying driver and tty->port->low_latency!
  * for example (low_latency: 1 / 0):
  * serial.c:	uart-interrupt / softint
  * usbserial:	urb-complete-interrupt / softint
diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
index 278dea0..1373c6d 100644
--- a/drivers/net/ppp/Kconfig
+++ b/drivers/net/ppp/Kconfig
@@ -147,6 +147,7 @@ config PPPOL2TP
 	  Support for PPP-over-L2TP socket family. L2TP is a protocol
 	  used by ISPs and enterprises to tunnel PPP traffic over UDP
 	  tunnels. L2TP is replacing PPTP for VPN uses.
+if TTY
 
 config PPP_ASYNC
 	tristate "PPP support for async serial ports"
@@ -172,4 +173,6 @@ config PPP_SYNC_TTY
 
 	  To compile this driver as a module, choose M here.
 
+endif # TTY
+
 endif # PPP
diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig
index 211b160..48e6871 100644
--- a/drivers/net/slip/Kconfig
+++ b/drivers/net/slip/Kconfig
@@ -4,6 +4,7 @@
 
 config SLIP
 	tristate "SLIP (serial line) support"
+	depends on TTY
 	---help---
 	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
 	  connect to your Internet service provider or to connect to some
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 3a44a5d..da92ed3 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -443,7 +443,7 @@ config USB_NET_QMI_WWAN
 
 config USB_HSO
 	tristate "Option USB High Speed Mobile Devices"
-	depends on USB && RFKILL
+	depends on USB && RFKILL && TTY
 	default n
 	help
 	  Choose this option if you have an Option HSDPA/HSUPA card.
@@ -491,7 +491,7 @@ config USB_SIERRA_NET
 
 config USB_VL600
 	tristate "LG VL600 modem dongle"
-	depends on USB_NET_CDCETHER
+	depends on USB_NET_CDCETHER && TTY
 	select USB_ACM
 	help
 	  Select this if you want to use an LG Electronics 4G/LTE usb modem
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 41e5dfb..e2dd324 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2035,25 +2035,23 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
 	tty = tty_port_tty_get(&serial->port);
 
 	/* Push data to tty */
-	if (tty) {
-		write_length_remaining = urb->actual_length -
-			serial->curr_rx_urb_offset;
-		D1("data to push to tty");
-		while (write_length_remaining) {
-			if (test_bit(TTY_THROTTLED, &tty->flags)) {
-				tty_kref_put(tty);
-				return -1;
-			}
-			curr_write_len =  tty_insert_flip_string
-				(tty, urb->transfer_buffer +
-				 serial->curr_rx_urb_offset,
-				 write_length_remaining);
-			serial->curr_rx_urb_offset += curr_write_len;
-			write_length_remaining -= curr_write_len;
-			tty_flip_buffer_push(tty);
+	write_length_remaining = urb->actual_length -
+		serial->curr_rx_urb_offset;
+	D1("data to push to tty");
+	while (write_length_remaining) {
+		if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
+			tty_kref_put(tty);
+			return -1;
 		}
-		tty_kref_put(tty);
+		curr_write_len = tty_insert_flip_string(&serial->port,
+			urb->transfer_buffer + serial->curr_rx_urb_offset,
+			write_length_remaining);
+		serial->curr_rx_urb_offset += curr_write_len;
+		write_length_remaining -= curr_write_len;
+		tty_flip_buffer_push(&serial->port);
 	}
+	tty_kref_put(tty);
+
 	if (write_length_remaining == 0) {
 		serial->curr_rx_urb_offset = 0;
 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 13daec8..94e2349 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -375,7 +375,7 @@ config LAPBETHER
 
 config X25_ASY
 	tristate "X.25 async driver"
-	depends on LAPB && X25
+	depends on LAPB && X25 && TTY
 	---help---
 	  Send and receive X.25 frames over regular asynchronous serial
 	  lines such as telephone lines equipped with ordinary modems.