summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/pcnet32.c302
1 files changed, 141 insertions, 161 deletions
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 16b9538..bf72aa8 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1124,161 +1124,140 @@ static int pcnet32_suspend(struct net_device *dev, unsigned long *flags,
return 1;
}
+/*
+ * process one receive descriptor entry
+ */
+
+static void pcnet32_rx_entry(struct net_device *dev,
+ struct pcnet32_private *lp,
+ struct pcnet32_rx_head *rxp,
+ int entry)
+{
+ int status = (short)le16_to_cpu(rxp->status) >> 8;
+ int rx_in_place = 0;
+ struct sk_buff *skb;
+ short pkt_len;
+
+ if (status != 0x03) { /* There was an error. */
+ /*
+ * There is a tricky error noted by John Murphy,
+ * <murf@perftech.com> to Russ Nelson: Even with full-sized
+ * buffers it's possible for a jabber packet to use two
+ * buffers, with only the last correctly noting the error.
+ */
+ if (status & 0x01) /* Only count a general error at the */
+ lp->stats.rx_errors++; /* end of a packet. */
+ if (status & 0x20)
+ lp->stats.rx_frame_errors++;
+ if (status & 0x10)
+ lp->stats.rx_over_errors++;
+ if (status & 0x08)
+ lp->stats.rx_crc_errors++;
+ if (status & 0x04)
+ lp->stats.rx_fifo_errors++;
+ return;
+ }
+
+ pkt_len = (le32_to_cpu(rxp->msg_length) & 0xfff) - 4;
+
+ /* Discard oversize frames. */
+ if (unlikely(pkt_len > PKT_BUF_SZ - 2)) {
+ if (netif_msg_drv(lp))
+ printk(KERN_ERR "%s: Impossible packet size %d!\n",
+ dev->name, pkt_len);
+ lp->stats.rx_errors++;
+ return;
+ }
+ if (pkt_len < 60) {
+ if (netif_msg_rx_err(lp))
+ printk(KERN_ERR "%s: Runt packet!\n", dev->name);
+ lp->stats.rx_errors++;
+ return;
+ }
+
+ if (pkt_len > rx_copybreak) {
+ struct sk_buff *newskb;
+
+ if ((newskb = dev_alloc_skb(PKT_BUF_SZ))) {
+ skb_reserve(newskb, 2);
+ skb = lp->rx_skbuff[entry];
+ pci_unmap_single(lp->pci_dev,
+ lp->rx_dma_addr[entry],
+ PKT_BUF_SZ - 2,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb, pkt_len);
+ lp->rx_skbuff[entry] = newskb;
+ newskb->dev = dev;
+ lp->rx_dma_addr[entry] =
+ pci_map_single(lp->pci_dev,
+ newskb->data,
+ PKT_BUF_SZ - 2,
+ PCI_DMA_FROMDEVICE);
+ rxp->base = le32_to_cpu(lp->rx_dma_addr[entry]);
+ rx_in_place = 1;
+ } else
+ skb = NULL;
+ } else {
+ skb = dev_alloc_skb(pkt_len + 2);
+ }
+
+ if (skb == NULL) {
+ if (netif_msg_drv(lp))
+ printk(KERN_ERR
+ "%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ lp->stats.rx_dropped++;
+ return;
+ }
+ skb->dev = dev;
+ if (!rx_in_place) {
+ skb_reserve(skb, 2); /* 16 byte align */
+ skb_put(skb, pkt_len); /* Make room */
+ pci_dma_sync_single_for_cpu(lp->pci_dev,
+ lp->rx_dma_addr[entry],
+ PKT_BUF_SZ - 2,
+ PCI_DMA_FROMDEVICE);
+ eth_copy_and_sum(skb,
+ (unsigned char *)(lp->rx_skbuff[entry]->data),
+ pkt_len, 0);
+ pci_dma_sync_single_for_device(lp->pci_dev,
+ lp->rx_dma_addr[entry],
+ PKT_BUF_SZ - 2,
+ PCI_DMA_FROMDEVICE);
+ }
+ lp->stats.rx_bytes += skb->len;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ return;
+}
+
-static int pcnet32_rx(struct net_device *dev)
+static void pcnet32_rx(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
int entry = lp->cur_rx & lp->rx_mod_mask;
+ struct pcnet32_rx_head *rxp = &lp->rx_ring[entry];
+ int npackets = 0;
int boguscnt = lp->rx_ring_size / 2;
/* If we own the next entry, it's a new packet. Send it up. */
- while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) {
- int status = (short)le16_to_cpu(lp->rx_ring[entry].status) >> 8;
-
- if (status != 0x03) { /* There was an error. */
- /*
- * There is a tricky error noted by John Murphy,
- * <murf@perftech.com> to Russ Nelson: Even with full-sized
- * buffers it's possible for a jabber packet to use two
- * buffers, with only the last correctly noting the error.
- */
- if (status & 0x01) /* Only count a general error at the */
- lp->stats.rx_errors++; /* end of a packet. */
- if (status & 0x20)
- lp->stats.rx_frame_errors++;
- if (status & 0x10)
- lp->stats.rx_over_errors++;
- if (status & 0x08)
- lp->stats.rx_crc_errors++;
- if (status & 0x04)
- lp->stats.rx_fifo_errors++;
- lp->rx_ring[entry].status &= le16_to_cpu(0x03ff);
- } else {
- /* Malloc up new buffer, compatible with net-2e. */
- short pkt_len =
- (le32_to_cpu(lp->rx_ring[entry].msg_length) & 0xfff)
- - 4;
- struct sk_buff *skb;
-
- /* Discard oversize frames. */
- if (unlikely(pkt_len > PKT_BUF_SZ - 2)) {
- if (netif_msg_drv(lp))
- printk(KERN_ERR
- "%s: Impossible packet size %d!\n",
- dev->name, pkt_len);
- lp->stats.rx_errors++;
- } else if (pkt_len < 60) {
- if (netif_msg_rx_err(lp))
- printk(KERN_ERR "%s: Runt packet!\n",
- dev->name);
- lp->stats.rx_errors++;
- } else {
- int rx_in_place = 0;
-
- if (pkt_len > rx_copybreak) {
- struct sk_buff *newskb;
-
- if ((newskb =
- dev_alloc_skb(PKT_BUF_SZ))) {
- skb_reserve(newskb, 2);
- skb = lp->rx_skbuff[entry];
- pci_unmap_single(lp->pci_dev,
- lp->
- rx_dma_addr
- [entry],
- PKT_BUF_SZ - 2,
- PCI_DMA_FROMDEVICE);
- skb_put(skb, pkt_len);
- lp->rx_skbuff[entry] = newskb;
- newskb->dev = dev;
- lp->rx_dma_addr[entry] =
- pci_map_single(lp->pci_dev,
- newskb->data,
- PKT_BUF_SZ -
- 2,
- PCI_DMA_FROMDEVICE);
- lp->rx_ring[entry].base =
- le32_to_cpu(lp->
- rx_dma_addr
- [entry]);
- rx_in_place = 1;
- } else
- skb = NULL;
- } else {
- skb = dev_alloc_skb(pkt_len + 2);
- }
-
- if (skb == NULL) {
- int i;
- if (netif_msg_drv(lp))
- printk(KERN_ERR
- "%s: Memory squeeze, deferring packet.\n",
- dev->name);
- for (i = 0; i < lp->rx_ring_size; i++)
- if ((short)
- le16_to_cpu(lp->
- rx_ring[(entry +
- i)
- & lp->
- rx_mod_mask].
- status) < 0)
- break;
-
- if (i > lp->rx_ring_size - 2) {
- lp->stats.rx_dropped++;
- lp->rx_ring[entry].status |=
- le16_to_cpu(0x8000);
- wmb(); /* Make sure adapter sees owner change */
- lp->cur_rx++;
- }
- break;
- }
- skb->dev = dev;
- if (!rx_in_place) {
- skb_reserve(skb, 2); /* 16 byte align */
- skb_put(skb, pkt_len); /* Make room */
- pci_dma_sync_single_for_cpu(lp->pci_dev,
- lp->
- rx_dma_addr
- [entry],
- PKT_BUF_SZ -
- 2,
- PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb,
- (unsigned char *)(lp->
- rx_skbuff
- [entry]->
- data),
- pkt_len, 0);
- pci_dma_sync_single_for_device(lp->
- pci_dev,
- lp->
- rx_dma_addr
- [entry],
- PKT_BUF_SZ
- - 2,
- PCI_DMA_FROMDEVICE);
- }
- lp->stats.rx_bytes += skb->len;
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- }
- }
+ while (boguscnt > npackets && (short)le16_to_cpu(rxp->status) >= 0) {
+ pcnet32_rx_entry(dev, lp, rxp, entry);
+ npackets += 1;
/*
- * The docs say that the buffer length isn't touched, but Andrew Boyd
- * of QNX reports that some revs of the 79C965 clear it.
+ * The docs say that the buffer length isn't touched, but Andrew
+ * Boyd of QNX reports that some revs of the 79C965 clear it.
*/
- lp->rx_ring[entry].buf_length = le16_to_cpu(2 - PKT_BUF_SZ);
- wmb(); /* Make sure owner changes after all others are visible */
- lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
+ rxp->buf_length = le16_to_cpu(2 - PKT_BUF_SZ);
+ wmb(); /* Make sure owner changes after others are visible */
+ rxp->status = le16_to_cpu(0x8000);
entry = (++lp->cur_rx) & lp->rx_mod_mask;
- if (--boguscnt <= 0)
- break; /* don't stay in loop forever */
+ rxp = &lp->rx_ring[entry];
}
- return 0;
+ return;
}
static int pcnet32_tx(struct net_device *dev, u16 csr0)
@@ -1298,7 +1277,7 @@ static int pcnet32_tx(struct net_device *dev, u16 csr0)
lp->tx_ring[entry].base = 0;
if (status & 0x4000) {
- /* There was an major error, log it. */
+ /* There was a major error, log it. */
int err_status = le32_to_cpu(lp->tx_ring[entry].misc);
lp->stats.tx_errors++;
if (netif_msg_tx_err(lp))
@@ -1329,8 +1308,7 @@ static int pcnet32_tx(struct net_device *dev, u16 csr0)
if (!lp->dxsuflo) { /* If controller doesn't recover ... */
/* Ackk! On FIFO errors the Tx unit is turned off! */
/* Remove this verbosity later! */
- if (netif_msg_tx_err
- (lp))
+ if (netif_msg_tx_err(lp))
printk(KERN_ERR
"%s: Tx FIFO error! CSR0=%4.4x\n",
dev->name, csr0);
@@ -1350,16 +1328,14 @@ static int pcnet32_tx(struct net_device *dev, u16 csr0)
lp->tx_dma_addr[entry],
lp->tx_skbuff[entry]->
len, PCI_DMA_TODEVICE);
- dev_kfree_skb_irq(lp->tx_skbuff[entry]);
+ dev_kfree_skb_any(lp->tx_skbuff[entry]);
lp->tx_skbuff[entry] = NULL;
lp->tx_dma_addr[entry] = 0;
}
dirty_tx++;
}
- delta =
- (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask +
- lp->tx_ring_size);
+ delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size);
if (delta > lp->tx_ring_size) {
if (netif_msg_drv(lp))
printk(KERN_ERR
@@ -2535,19 +2511,20 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs *regs)
spin_lock(&lp->lock);
- while ((csr0 = lp->a.read_csr(ioaddr, 0)) & 0x8f00 && --boguscnt >= 0) {
+ csr0 = lp->a.read_csr(ioaddr, CSR0);
+ while ((csr0 & 0x8f00) && --boguscnt >= 0) {
if (csr0 == 0xffff) {
break; /* PCMCIA remove happened */
}
/* Acknowledge all of the current interrupt sources ASAP. */
- lp->a.write_csr(ioaddr, 0, csr0 & ~0x004f);
+ lp->a.write_csr(ioaddr, CSR0, csr0 & ~0x004f);
must_restart = 0;
if (netif_msg_intr(lp))
printk(KERN_DEBUG
"%s: interrupt csr0=%#2.2x new csr=%#2.2x.\n",
- dev->name, csr0, lp->a.read_csr(ioaddr, 0));
+ dev->name, csr0, lp->a.read_csr(ioaddr, CSR0));
if (csr0 & 0x0400) /* Rx interrupt */
pcnet32_rx(dev);
@@ -2561,14 +2538,16 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs *regs)
lp->stats.tx_errors++; /* Tx babble. */
if (csr0 & 0x1000) {
/*
- * this happens when our receive ring is full. This shouldn't
- * be a problem as we will see normal rx interrupts for the frames
- * in the receive ring. But there are some PCI chipsets (I can
- * reproduce this on SP3G with Intel saturn chipset) which have
- * sometimes problems and will fill up the receive ring with
- * error descriptors. In this situation we don't get a rx
- * interrupt, but a missed frame interrupt sooner or later.
- * So we try to clean up our receive ring here.
+ * This happens when our receive ring is full. This
+ * shouldn't be a problem as we will see normal rx
+ * interrupts for the frames in the receive ring. But
+ * there are some PCI chipsets (I can reproduce this
+ * on SP3G with Intel saturn chipset) which have
+ * sometimes problems and will fill up the receive
+ * ring with error descriptors. In this situation we
+ * don't get a rx interrupt, but a missed frame
+ * interrupt sooner or later. So we try to clean up
+ * our receive ring here.
*/
pcnet32_rx(dev);
lp->stats.rx_errors++; /* Missed a Rx frame. */
@@ -2588,6 +2567,7 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs *regs)
pcnet32_restart(dev, CSR0_START);
netif_wake_queue(dev);
}
+ csr0 = lp->a.read_csr(ioaddr, CSR0);
}
/* Set interrupt enable. */
OpenPOWER on IntegriCloud