diff options
Diffstat (limited to 'drivers/net/wireless/wl3501_cs.c')
-rw-r--r-- | drivers/net/wireless/wl3501_cs.c | 76 |
1 files changed, 28 insertions, 48 deletions
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 4f1e0cfe6..7b9621d 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -67,23 +67,7 @@ /* For rough constant delay */ #define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); } -/* - * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not - * define PCMCIA_DEBUG at all, all the debug code will be left out. If you - * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled -- - * but it can then be enabled for specific modules at load time with a - * 'pc_debug=#' option to insmod. - */ -#define PCMCIA_DEBUG 0 -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -#define dprintk(n, format, args...) \ - { if (pc_debug > (n)) \ - printk(KERN_INFO "%s: " format "\n", __func__ , ##args); } -#else -#define dprintk(n, format, args...) -#endif + #define wl3501_outb(a, b) { outb(a, b); slow_down_io(); } #define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); } @@ -381,7 +365,7 @@ static void wl3501_free_tx_buffer(struct wl3501_card *this, u16 ptr) static int wl3501_esbq_req_test(struct wl3501_card *this) { - u8 tmp; + u8 tmp = 0; wl3501_get_from_wla(this, this->esbq_req_head + 3, &tmp, sizeof(tmp)); return tmp & 0x80; @@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) int matchflag = 0; struct wl3501_scan_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) { - dprintk(3, "success"); + pr_debug("success"); if ((this->net_type == IW_MODE_INFRA && (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) || (this->net_type == IW_MODE_ADHOC && @@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) } } } else if (sig.status == WL3501_STATUS_TIMEOUT) { - dprintk(3, "timeout"); + pr_debug("timeout"); this->join_sta_bss = 0; for (i = this->join_sta_bss; i < this->bss_cnt; i++) if (!wl3501_mgmt_join(this, i)) @@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this) .timeout = 1000, }; - dprintk(3, "entry"); + pr_debug("entry"); memcpy(sig.mac_addr, this->bssid, ETH_ALEN); return wl3501_esbq_exec(this, &sig, sizeof(sig)); } @@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this) .cap_info = this->cap_info, }; - dprintk(3, "entry"); + pr_debug("entry"); memcpy(sig.mac_addr, this->bssid, ETH_ALEN); return wl3501_esbq_exec(this, &sig, sizeof(sig)); } @@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr) struct wl3501_card *this = netdev_priv(dev); struct wl3501_join_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) { if (this->net_type == IW_MODE_INFRA) { @@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev, { struct wl3501_md_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); wl3501_free_tx_buffer(this, sig.data); if (netif_queue_stopped(dev)) @@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev, static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this, u16 addr, void *sig, int size) { - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &this->sig_get_confirm, sizeof(this->sig_get_confirm)); wake_up(&this->wait); @@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev, { struct wl3501_start_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) netif_wake_queue(dev); @@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev, struct wl3501_card *this = netdev_priv(dev); struct wl3501_assoc_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) @@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this, { struct wl3501_auth_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) @@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev) u8 sig_id; struct wl3501_card *this = netdev_priv(dev); - dprintk(3, "entry"); + pr_debug("entry"); loop: morepkts = 0; if (!wl3501_esbq_confirm(this)) @@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev) wl3501_ack_interrupt(this); wl3501_unblock_interrupt(this); wl3501_mgmt_scan(this, 100); - dprintk(1, "%s: device reset", dev->name); + pr_debug("%s: device reset", dev->name); rc = 0; out: return rc; @@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev) link->open++; /* Initial WL3501 firmware */ - dprintk(1, "%s: Initialize WL3501 firmware...", dev->name); + pr_debug("%s: Initialize WL3501 firmware...", dev->name); if (wl3501_init_firmware(this)) goto fail; /* Initial device variables */ @@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev) wl3501_unblock_interrupt(this); wl3501_mgmt_scan(this, 100); rc = 0; - dprintk(1, "%s: WL3501 opened", dev->name); + pr_debug("%s: WL3501 opened", dev->name); printk(KERN_INFO "%s: Card Name: %s\n" "%s: Firmware Date: %s\n", dev->name, this->card_name, @@ -1914,8 +1898,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->io.IOAddrLines = 5; /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; + p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; p_dev->irq.Handler = wl3501_interrupt; /* General socket configuration */ @@ -1938,16 +1921,13 @@ static int wl3501_probe(struct pcmcia_device *p_dev) dev->wireless_handlers = &wl3501_handler_def; SET_ETHTOOL_OPS(dev, &ops); netif_stop_queue(dev); - p_dev->priv = p_dev->irq.Instance = dev; + p_dev->priv = dev; return wl3501_config(p_dev); out_link: return -ENOMEM; } -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - /** * wl3501_config - configure the PCMCIA socket and make eth device available * @link - FILL_IN @@ -1959,7 +1939,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; - int i = 0, j, last_fn, last_ret; + int i = 0, j, ret; struct wl3501_card *this; /* Try allocating IO ports. This tries a few fixed addresses. If you @@ -1975,24 +1955,26 @@ static int wl3501_config(struct pcmcia_device *link) if (i == 0) break; } - if (i != 0) { - cs_error(link, RequestIO, i); + if (i != 0) goto failed; - } /* Now allocate an interrupt line. Note that this does not actually * assign a handler to the interrupt. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* This actually configures the PCMCIA socket -- setting up the I/O * windows and the interrupt mapping. */ - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; dev->irq = link->irq.AssignedIRQ; dev->base_addr = link->io.BasePort1; - SET_NETDEV_DEV(dev, &handle_to_dev(link)); + SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev)) { printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n"); goto failed; @@ -2041,8 +2023,6 @@ static int wl3501_config(struct pcmcia_device *link) netif_start_queue(dev); return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: wl3501_release(link); return -ENODEV; |