summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl3501_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wl3501_cs.c')
-rw-r--r--drivers/net/wireless/wl3501_cs.c74
1 files changed, 27 insertions, 47 deletions
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 4f1e0cfe6..5f0401a 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
/* For rough constant delay */
#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out. If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
- { if (pc_debug > (n)) \
- printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
int matchflag = 0;
struct wl3501_scan_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
- dprintk(3, "success");
+ pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
(sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
- dprintk(3, "timeout");
+ pr_debug("timeout");
this->join_sta_bss = 0;
for (i = this->join_sta_bss; i < this->bss_cnt; i++)
if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this)
.timeout = 1000,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this)
.cap_info = this->cap_info,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_join_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
{
struct wl3501_md_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
wl3501_free_tx_buffer(this, sig.data);
if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
u16 addr, void *sig, int size)
{
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
sizeof(this->sig_get_confirm));
wake_up(&this->wait);
@@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
{
struct wl3501_start_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_assoc_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
{
struct wl3501_auth_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev)
u8 sig_id;
struct wl3501_card *this = netdev_priv(dev);
- dprintk(3, "entry");
+ pr_debug("entry");
loop:
morepkts = 0;
if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev)
wl3501_ack_interrupt(this);
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
- dprintk(1, "%s: device reset", dev->name);
+ pr_debug("%s: device reset", dev->name);
rc = 0;
out:
return rc;
@@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev)
link->open++;
/* Initial WL3501 firmware */
- dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+ pr_debug("%s: Initialize WL3501 firmware...", dev->name);
if (wl3501_init_firmware(this))
goto fail;
/* Initial device variables */
@@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev)
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
rc = 0;
- dprintk(1, "%s: WL3501 opened", dev->name);
+ pr_debug("%s: WL3501 opened", dev->name);
printk(KERN_INFO "%s: Card Name: %s\n"
"%s: Firmware Date: %s\n",
dev->name, this->card_name,
@@ -1914,8 +1898,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
p_dev->io.IOAddrLines = 5;
/* Interrupt setup */
- p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = wl3501_interrupt;
/* General socket configuration */
@@ -1938,16 +1921,13 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
dev->wireless_handlers = &wl3501_handler_def;
SET_ETHTOOL_OPS(dev, &ops);
netif_stop_queue(dev);
- p_dev->priv = p_dev->irq.Instance = dev;
+ p_dev->priv = dev;
return wl3501_config(p_dev);
out_link:
return -ENOMEM;
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/**
* wl3501_config - configure the PCMCIA socket and make eth device available
* @link - FILL_IN
@@ -1959,7 +1939,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- int i = 0, j, last_fn, last_ret;
+ int i = 0, j, ret;
struct wl3501_card *this;
/* Try allocating IO ports. This tries a few fixed addresses. If you
@@ -1975,24 +1955,26 @@ static int wl3501_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {
printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
goto failed;
@@ -2041,8 +2023,6 @@ static int wl3501_config(struct pcmcia_device *link)
netif_start_queue(dev);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
wl3501_release(link);
return -ENODEV;
OpenPOWER on IntegriCloud