summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wavelan_cs.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wavelan_cs.h')
-rw-r--r--drivers/net/wireless/wavelan_cs.h386
1 files changed, 386 insertions, 0 deletions
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h
new file mode 100644
index 0000000..29cff6d
--- /dev/null
+++ b/drivers/net/wireless/wavelan_cs.h
@@ -0,0 +1,386 @@
+/*
+ * Wavelan Pcmcia driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganization and extension of the driver.
+ * Original copyright follow. See wavelan_cs.h for details.
+ *
+ * This file contain the declarations of the Wavelan hardware. Note that
+ * the Pcmcia Wavelan include a i82593 controller (see definitions in
+ * file i82593.h).
+ *
+ * The main difference between the pcmcia hardware and the ISA one is
+ * the Ethernet Controller (i82593 instead of i82586). The i82593 allow
+ * only one send buffer. The PSA (Parameter Storage Area : EEprom for
+ * permanent storage of various info) is memory mapped, but not the
+ * MMI (Modem Management Interface).
+ */
+
+/*
+ * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card:
+ * An Ethernet-like radio transceiver controlled by an Intel 82593
+ * coprocessor.
+ *
+ *
+ ****************************************************************************
+ * Copyright 1995
+ * Anthony D. Joseph
+ * Massachusetts Institute of Technology
+ *
+ * Permission to use, copy, modify, and distribute this program
+ * for any purpose and without fee is hereby granted, provided
+ * that this copyright and permission notice appear on all copies
+ * and supporting documentation, the name of M.I.T. not be used
+ * in advertising or publicity pertaining to distribution of the
+ * program without specific prior permission, and notice be given
+ * in supporting documentation that copying and distribution is
+ * by permission of M.I.T. M.I.T. makes no representations about
+ * the suitability of this software for any purpose. It is pro-
+ * vided "as is" without express or implied warranty.
+ ****************************************************************************
+ *
+ *
+ * Credits:
+ * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for
+ * providing extremely useful information about WaveLAN PCMCIA hardware
+ *
+ * This driver is based upon several other drivers, in particular:
+ * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
+ * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
+ * Anders Klemets' PCMCIA WaveLAN adapter driver
+ * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
+ */
+
+#ifndef _WAVELAN_CS_H
+#define _WAVELAN_CS_H
+
+/************************** MAGIC NUMBERS ***************************/
+
+/* The detection of the wavelan card is made by reading the MAC address
+ * from the card and checking it. If you have a non AT&T product (OEM,
+ * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this
+ * part to accommodate your hardware...
+ */
+const unsigned char MAC_ADDRESSES[][3] =
+{
+ { 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */
+ { 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */
+ { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */
+ { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */
+ /* Add your card here and send me the patch ! */
+};
+
+/*
+ * Constants used to convert channels to frequencies
+ */
+
+/* Frequency available in the 2.0 modem, in units of 250 kHz
+ * (as read in the offset register of the dac area).
+ * Used to map channel numbers used by `wfreqsel' to frequencies
+ */
+const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
+ 0xD0, 0xF0, 0xF8, 0x150 };
+
+/* Frequencies of the 1.0 modem (fixed frequencies).
+ * Use to map the PSA `subband' to a frequency
+ * Note : all frequencies apart from the first one need to be multiplied by 10
+ */
+const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
+
+
+/*************************** PC INTERFACE ****************************/
+
+/* WaveLAN host interface definitions */
+
+#define LCCR(base) (base) /* LAN Controller Command Register */
+#define LCSR(base) (base) /* LAN Controller Status Register */
+#define HACR(base) (base+0x1) /* Host Adapter Command Register */
+#define HASR(base) (base+0x1) /* Host Adapter Status Register */
+#define PIORL(base) (base+0x2) /* Program I/O Register Low */
+#define RPLL(base) (base+0x2) /* Receive Pointer Latched Low */
+#define PIORH(base) (base+0x3) /* Program I/O Register High */
+#define RPLH(base) (base+0x3) /* Receive Pointer Latched High */
+#define PIOP(base) (base+0x4) /* Program I/O Port */
+#define MMR(base) (base+0x6) /* MMI Address Register */
+#define MMD(base) (base+0x7) /* MMI Data Register */
+
+/* Host Adaptor Command Register bit definitions */
+
+#define HACR_LOF (1 << 3) /* Lock Out Flag, toggle every 250ms */
+#define HACR_PWR_STAT (1 << 4) /* Power State, 1=active, 0=sleep */
+#define HACR_TX_DMA_RESET (1 << 5) /* Reset transmit DMA ptr on high */
+#define HACR_RX_DMA_RESET (1 << 6) /* Reset receive DMA ptr on high */
+#define HACR_ROM_WEN (1 << 7) /* EEPROM write enabled when true */
+
+#define HACR_RESET (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET)
+#define HACR_DEFAULT (HACR_PWR_STAT)
+
+/* Host Adapter Status Register bit definitions */
+
+#define HASR_MMI_BUSY (1 << 2) /* MMI is busy when true */
+#define HASR_LOF (1 << 3) /* Lock out flag status */
+#define HASR_NO_CLK (1 << 4) /* active when modem not connected */
+
+/* Miscellaneous bit definitions */
+
+#define PIORH_SEL_TX (1 << 5) /* PIOR points to 0=rx/1=tx buffer */
+#define MMR_MMI_WR (1 << 0) /* Next MMI cycle is 0=read, 1=write */
+#define PIORH_MASK 0x1f /* only low 5 bits are significant */
+#define RPLH_MASK 0x1f /* only low 5 bits are significant */
+#define MMI_ADDR_MASK 0x7e /* Bits 1-6 of MMR are significant */
+
+/* Attribute Memory map */
+
+#define CIS_ADDR 0x0000 /* Card Information Status Register */
+#define PSA_ADDR 0x0e00 /* Parameter Storage Area address */
+#define EEPROM_ADDR 0x1000 /* EEPROM address (unused ?) */
+#define COR_ADDR 0x4000 /* Configuration Option Register */
+
+/* Configuration Option Register bit definitions */
+
+#define COR_CONFIG (1 << 0) /* Config Index, 0 when unconfigured */
+#define COR_SW_RESET (1 << 7) /* Software Reset on true */
+#define COR_LEVEL_IRQ (1 << 6) /* Level IRQ */
+
+/* Local Memory map */
+
+#define RX_BASE 0x0000 /* Receive memory, 8 kB */
+#define TX_BASE 0x2000 /* Transmit memory, 2 kB */
+#define UNUSED_BASE 0x2800 /* Unused, 22 kB */
+#define RX_SIZE (TX_BASE-RX_BASE) /* Size of receive area */
+#define RX_SIZE_SHIFT 6 /* Bits to shift in stop register */
+
+#define TRUE 1
+#define FALSE 0
+
+#define MOD_ENAL 1
+#define MOD_PROM 2
+
+/* Size of a MAC address */
+#define WAVELAN_ADDR_SIZE 6
+
+/* Maximum size of Wavelan packet */
+#define WAVELAN_MTU 1500
+
+#define MAXDATAZ (6 + 6 + 2 + WAVELAN_MTU)
+
+/********************** PARAMETER STORAGE AREA **********************/
+
+/*
+ * Parameter Storage Area (PSA).
+ */
+typedef struct psa_t psa_t;
+struct psa_t
+{
+ /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */
+ unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */
+ unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */
+ unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */
+ unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */
+ unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */
+ unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */
+ unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */
+ unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */
+ unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */
+ unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */
+
+ unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */
+ unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */
+ unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */
+#define PSA_UNIVERSAL 0 /* Universal (factory) */
+#define PSA_LOCAL 1 /* Local */
+ unsigned char psa_comp_number; /* [0x1D] Compatability Number: */
+#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */
+#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */
+#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */
+#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */
+#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */
+ unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */
+ unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */
+#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */
+ unsigned char psa_subband; /* [0x20] Subband */
+#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */
+#define PSA_SUBBAND_2425 1 /* 2425 MHz */
+#define PSA_SUBBAND_2460 2 /* 2460 MHz */
+#define PSA_SUBBAND_2484 3 /* 2484 MHz */
+#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */
+ unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */
+ unsigned char psa_mod_delay; /* [0x22] Modem Delay ??? (reserved) */
+ unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */
+ unsigned char psa_nwid_select; /* [0x25] Network ID Select On Off */
+ unsigned char psa_encryption_select; /* [0x26] Encryption On Off */
+ unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */
+ unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */
+ unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */
+ unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */
+ unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */
+ unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/
+ unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */
+ unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */
+};
+
+/* Size for structure checking (if padding is correct) */
+#define PSA_SIZE 64
+
+/* Calculate offset of a field in the above structure
+ * Warning : only even addresses are used */
+#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
+
+/******************** MODEM MANAGEMENT INTERFACE ********************/
+
+/*
+ * Modem Management Controller (MMC) write structure.
+ */
+typedef struct mmw_t mmw_t;
+struct mmw_t
+{
+ unsigned char mmw_encr_key[8]; /* encryption key */
+ unsigned char mmw_encr_enable; /* enable/disable encryption */
+#define MMW_ENCR_ENABLE_MODE 0x02 /* Mode of security option */
+#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option */
+ unsigned char mmw_unused0[1]; /* unused */
+ unsigned char mmw_des_io_invert; /* Encryption option */
+#define MMW_DES_IO_INVERT_RES 0x0F /* Reserved */
+#define MMW_DES_IO_INVERT_CTRL 0xF0 /* Control ??? (set to 0) */
+ unsigned char mmw_unused1[5]; /* unused */
+ unsigned char mmw_loopt_sel; /* looptest selection */
+#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* disable NWID filtering */
+#define MMW_LOOPT_SEL_INT 0x20 /* activate Attention Request */
+#define MMW_LOOPT_SEL_LS 0x10 /* looptest w/o collision avoidance */
+#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */
+#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */
+#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */
+#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */
+ unsigned char mmw_jabber_enable; /* jabber timer enable */
+ /* Abort transmissions > 200 ms */
+ unsigned char mmw_freeze; /* freeze / unfreeeze signal level */
+ /* 0 : signal level & qual updated for every new message, 1 : frozen */
+ unsigned char mmw_anten_sel; /* antenna selection */
+#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */
+#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */
+ unsigned char mmw_ifs; /* inter frame spacing */
+ /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
+ unsigned char mmw_mod_delay; /* modem delay (synchro) */
+ unsigned char mmw_jam_time; /* jamming time (after collision) */
+ unsigned char mmw_unused2[1]; /* unused */
+ unsigned char mmw_thr_pre_set; /* level threshold preset */
+ /* Discard all packet with signal < this value (4) */
+ unsigned char mmw_decay_prm; /* decay parameters */
+ unsigned char mmw_decay_updat_prm; /* decay update parameterz */
+ unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */
+ /* Discard all packet with quality < this value (3) */
+ unsigned char mmw_netw_id_l; /* NWID low order byte */
+ unsigned char mmw_netw_id_h; /* NWID high order byte */
+ /* Network ID or Domain : create virtual net on the air */
+
+ /* 2.0 Hardware extension - frequency selection support */
+ unsigned char mmw_mode_select; /* for analog tests (set to 0) */
+ unsigned char mmw_unused3[1]; /* unused */
+ unsigned char mmw_fee_ctrl; /* frequency eeprom control */
+#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions */
+#define MMW_FEE_CTRL_DWLD 0x08 /* Download eeprom to mmc */
+#define MMW_FEE_CTRL_CMD 0x07 /* EEprom commands : */
+#define MMW_FEE_CTRL_READ 0x06 /* Read */
+#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */
+#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address */
+#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses */
+#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */
+#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */
+#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */
+#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers */
+#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write addr in protect register */
+#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */
+ /* Never issue this command (PRDS) : it's irreversible !!! */
+
+ unsigned char mmw_fee_addr; /* EEprom address */
+#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel */
+#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */
+#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */
+#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */
+#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */
+#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */
+
+ unsigned char mmw_fee_data_l; /* Write data to EEprom */
+ unsigned char mmw_fee_data_h; /* high octet */
+ unsigned char mmw_ext_ant; /* Setting for external antenna */
+#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */
+#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */
+#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */
+#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */
+#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */
+};
+
+/* Size for structure checking (if padding is correct) */
+#define MMW_SIZE 37
+
+/* Calculate offset of a field in the above structure */
+#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
+
+
+/*
+ * Modem Management Controller (MMC) read structure.
+ */
+typedef struct mmr_t mmr_t;
+struct mmr_t
+{
+ unsigned char mmr_unused0[8]; /* unused */
+ unsigned char mmr_des_status; /* encryption status */
+ unsigned char mmr_des_avail; /* encryption available (0x55 read) */
+#define MMR_DES_AVAIL_DES 0x55 /* DES available */
+#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */
+ unsigned char mmr_des_io_invert; /* des I/O invert register */
+ unsigned char mmr_unused1[5]; /* unused */
+ unsigned char mmr_dce_status; /* DCE status */
+#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */
+#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */
+#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */
+#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */
+#define MMR_DCE_STATUS 0x0F /* mask to get the bits */
+ unsigned char mmr_dsp_id; /* DSP id (AA = Daedalus rev A) */
+ unsigned char mmr_unused2[2]; /* unused */
+ unsigned char mmr_correct_nwid_l; /* # of correct NWID's rxd (low) */
+ unsigned char mmr_correct_nwid_h; /* # of correct NWID's rxd (high) */
+ /* Warning : Read high order octet first !!! */
+ unsigned char mmr_wrong_nwid_l; /* # of wrong NWID's rxd (low) */
+ unsigned char mmr_wrong_nwid_h; /* # of wrong NWID's rxd (high) */
+ unsigned char mmr_thr_pre_set; /* level threshold preset */
+#define MMR_THR_PRE_SET 0x3F /* level threshold preset */
+#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */
+ unsigned char mmr_signal_lvl; /* signal level */
+#define MMR_SIGNAL_LVL 0x3F /* signal level */
+#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */
+ unsigned char mmr_silence_lvl; /* silence level (noise) */
+#define MMR_SILENCE_LVL 0x3F /* silence level */
+#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */
+ unsigned char mmr_sgnl_qual; /* signal quality */
+#define MMR_SGNL_QUAL 0x0F /* signal quality */
+#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */
+ unsigned char mmr_netw_id_l; /* NWID low order byte ??? */
+ unsigned char mmr_unused3[3]; /* unused */
+
+ /* 2.0 Hardware extension - frequency selection support */
+ unsigned char mmr_fee_status; /* Status of frequency eeprom */
+#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision id */
+#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */
+#define MMR_FEE_STATUS_BUSY 0x04 /* EEprom busy */
+ unsigned char mmr_unused4[1]; /* unused */
+ unsigned char mmr_fee_data_l; /* Read data from eeprom (low) */
+ unsigned char mmr_fee_data_h; /* Read data from eeprom (high) */
+};
+
+/* Size for structure checking (if padding is correct) */
+#define MMR_SIZE 36
+
+/* Calculate offset of a field in the above structure */
+#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
+
+
+/* Make the two above structures one */
+typedef union mm_t
+{
+ struct mmw_t w; /* Write to the mmc */
+ struct mmr_t r; /* Read from the mmc */
+} mm_t;
+
+#endif /* _WAVELAN_CS_H */
OpenPOWER on IntegriCloud