summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h')
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h327
1 files changed, 327 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
new file mode 100644
index 0000000..028ec6d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -0,0 +1,327 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2013 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723E_PWRSEQ_H__
+#define __RTL8723E_PWRSEQ_H__
+
+#include "pwrseqcmd.h"
+/*
+ Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+ There are 6 HW Power States:
+ 0: POFF--Power Off
+ 1: PDN--Power Down
+ 2: CARDEMU--Card Emulation
+ 3: ACT--Active Mode
+ 4: LPS--Low Power State
+ 5: SUS--Suspend
+
+ The transision from different states are defined below
+ TRANS_CARDEMU_TO_ACT
+ TRANS_ACT_TO_CARDEMU
+ TRANS_CARDEMU_TO_SUS
+ TRANS_SUS_TO_CARDEMU
+ TRANS_CARDEMU_TO_PDN
+ TRANS_ACT_TO_LPS
+ TRANS_LPS_TO_ACT
+
+ TRANS_END
+ PWR SEQ Version: rtl8188e_PwrSeq_V09.h
+*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188E_TRANS_END_STEPS 1
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /* wait till 0x04[17] = 1 power ready*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /* 0x02[1:0] = 0 reset BB*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, \
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*0x24[23] = 2b'01 schmit trigger */ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*0x04[8] = 1 polling until return 0*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*wait till 0x04[8] = 0*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/\
+ {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/\
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/\
+ {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)},\
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)}, \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /*Set USB suspend enable local register 0xfe10[4]= 1 */ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ /*Set SDIO suspend local register*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ /*wait power state to suspend*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ /*Set SDIO suspend local register*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ /*wait power state to suspend*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*0x24[23] = 2b'01 schmit trigger */ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ /*Set USB suspend enable local register 0xfe10[4]= 1 */ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ /*Set SDIO suspend local register*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO,\
+ PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO,\
+ PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \
+ /*0x04[12:11] = 2b'01enable WL suspend*/
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/
+
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/
+
+
+#define RTL8188E_TRANS_ACT_TO_LPS \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*zero if no pkt is tx*/\
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*Should be zero if no packet is transmitting*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*Should be zero if no packet is transmitting*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*Should be zero if no packet is transmitting*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*CCK and OFDM are disabled, and clock are gated*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*check if removed later*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*Respond TxOK to scheduler*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
+
+
+#define RTL8188E_TRANS_LPS_TO_ACT \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*. 0x08[4] = 0 switch TSF to 40M*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*Polling 0x109[7]= 0 TSF in 40M*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \
+ {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*. 0x29[7:6] = 2b'00 enable BB clock*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*. 0x101[1] = 1*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ /*. 0x02[1:0] = 2b'11 enable BB macro*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
+
+
+#define RTL8188E_TRANS_END \
+ /* format */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
+ 0, PWR_CMD_END, 0, 0}
+
+extern struct wlan_pwr_cfg rtl8188e_power_on_flow
+ [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_radio_off_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_card_disable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_card_enable_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_suspend_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_resume_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_hwpdn_flow
+ [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_enter_lps_flow
+ [RTL8188E_TRANS_ACT_TO_LPS_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow
+ [RTL8188E_TRANS_LPS_TO_ACT_STEPS +
+ RTL8188E_TRANS_END_STEPS];
+
+/* RTL8723 Power Configuration CMDs for PCIe interface */
+#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188e_power_on_flow
+#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188e_radio_off_flow
+#define Rtl8188E_NIC_DISABLE_FLOW rtl8188e_card_disable_flow
+#define Rtl8188E_NIC_ENABLE_FLOW rtl8188e_card_enable_flow
+#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188e_suspend_flow
+#define Rtl8188E_NIC_RESUME_FLOW rtl8188e_resume_flow
+#define Rtl8188E_NIC_PDN_FLOW rtl8188e_hwpdn_flow
+#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188e_enter_lps_flow
+#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188e_leave_lps_flow
+
+#endif
OpenPOWER on IntegriCloud