diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h')
| -rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h | 327 |
1 files changed, 327 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h new file mode 100644 index 0000000..028ec6d --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h @@ -0,0 +1,327 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2013 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#ifndef __RTL8723E_PWRSEQ_H__ +#define __RTL8723E_PWRSEQ_H__ + +#include "pwrseqcmd.h" +/* + Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd + There are 6 HW Power States: + 0: POFF--Power Off + 1: PDN--Power Down + 2: CARDEMU--Card Emulation + 3: ACT--Active Mode + 4: LPS--Low Power State + 5: SUS--Suspend + + The transision from different states are defined below + TRANS_CARDEMU_TO_ACT + TRANS_ACT_TO_CARDEMU + TRANS_CARDEMU_TO_SUS + TRANS_SUS_TO_CARDEMU + TRANS_CARDEMU_TO_PDN + TRANS_ACT_TO_LPS + TRANS_LPS_TO_ACT + + TRANS_END + PWR SEQ Version: rtl8188e_PwrSeq_V09.h +*/ + +#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10 +#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10 +#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10 +#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10 +#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10 +#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10 +#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15 +#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15 +#define RTL8188E_TRANS_END_STEPS 1 + + +#define RTL8188E_TRANS_CARDEMU_TO_ACT \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /* wait till 0x04[17] = 1 power ready*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /* 0x02[1:0] = 0 reset BB*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, \ + {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*0x24[23] = 2b'01 schmit trigger */ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*0x04[8] = 1 polling until return 0*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*wait till 0x04[8] = 0*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/\ + {0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/\ + +#define RTL8188E_TRANS_ACT_TO_CARDEMU \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ + {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/\ + {0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*0x04[9] = 1 turn off MAC by HW state machine*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \ + + +#define RTL8188E_TRANS_CARDEMU_TO_SUS \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /*0x04[12:11] = 2b'01enable WL suspend*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)},\ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)}, \ + {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /*Set USB suspend enable local register 0xfe10[4]= 1 */ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + /*Set SDIO suspend local register*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + /*wait power state to suspend*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0}, + +#define RTL8188E_TRANS_SUS_TO_CARDEMU \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + /*Set SDIO suspend local register*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + /*wait power state to suspend*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*0x04[12:11] = 2b'01enable WL suspend*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, + +#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*0x24[23] = 2b'01 schmit trigger */ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /*0x04[12:11] = 2b'01 enable WL suspend*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ + {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ + {0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + /*Clear SIC_EN register 0x40[12] = 1'b0 */ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + {0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + /*Set USB suspend enable local register 0xfe10[4]= 1 */ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + /*Set SDIO suspend local register*/ \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/ + +#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \ + /*0x04[12:11] = 2b'01enable WL suspend*/ + + +#define RTL8188E_TRANS_CARDEMU_TO_PDN \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/ + + +#define RTL8188E_TRANS_PDN_TO_CARDEMU \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/ + + +#define RTL8188E_TRANS_ACT_TO_LPS \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ + {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*zero if no pkt is tx*/\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*Should be zero if no packet is transmitting*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*Should be zero if no packet is transmitting*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*Should be zero if no packet is transmitting*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*CCK and OFDM are disabled, and clock are gated*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*check if removed later*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \ + {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*Respond TxOK to scheduler*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \ + + +#define RTL8188E_TRANS_LPS_TO_ACT \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\ + {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \ + {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \ + {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \ + {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*. 0x08[4] = 0 switch TSF to 40M*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \ + {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*Polling 0x109[7]= 0 TSF in 40M*/ \ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \ + {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*. 0x29[7:6] = 2b'00 enable BB clock*/ \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*. 0x101[1] = 1*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \ + /*. 0x02[1:0] = 2b'11 enable BB macro*/\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)}, \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ + + +#define RTL8188E_TRANS_END \ + /* format */ \ + /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\ + {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + 0, PWR_CMD_END, 0, 0} + +extern struct wlan_pwr_cfg rtl8188e_power_on_flow + [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_radio_off_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_card_disable_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_card_enable_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_suspend_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_resume_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_hwpdn_flow + [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_enter_lps_flow + [RTL8188E_TRANS_ACT_TO_LPS_STEPS + + RTL8188E_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow + [RTL8188E_TRANS_LPS_TO_ACT_STEPS + + RTL8188E_TRANS_END_STEPS]; + +/* RTL8723 Power Configuration CMDs for PCIe interface */ +#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188e_power_on_flow +#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188e_radio_off_flow +#define Rtl8188E_NIC_DISABLE_FLOW rtl8188e_card_disable_flow +#define Rtl8188E_NIC_ENABLE_FLOW rtl8188e_card_enable_flow +#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188e_suspend_flow +#define Rtl8188E_NIC_RESUME_FLOW rtl8188e_resume_flow +#define Rtl8188E_NIC_PDN_FLOW rtl8188e_hwpdn_flow +#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188e_enter_lps_flow +#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188e_leave_lps_flow + +#endif |
