diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2500usb.c | 13 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00.h | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00config.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00lib.h | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00mac.c | 29 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.c | 36 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00usb.c | 32 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00usb.h | 22 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt73usb.c | 56 |
12 files changed, 149 insertions, 67 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3558cb2..3078417 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) int pipe = usb_sndbulkpipe(usb_dev, 1); int length; u16 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1130,6 +1131,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1650,7 +1662,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 07b03b3..db2dc97 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -108,7 +108,10 @@ #define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) #define DIFS ( PIFS + SLOT_TIME ) #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) -#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define EIFS ( SIFS + DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define SHORT_EIFS ( SIFS + SHORT_DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) /* * Chipset identification @@ -597,6 +600,7 @@ enum rt2x00_flags { DEVICE_STARTED_SUSPEND, DEVICE_ENABLED_RADIO, DEVICE_DISABLED_RADIO_HW, + DEVICE_DIRTY_CONFIG, /* * Driver features diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index f20ca71..3f89516 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -271,7 +271,7 @@ config: libconf.sifs = SIFS; libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; - libconf.eifs = EIFS; + libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS; } libconf.conf = conf; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 8c93eb8..f42283a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) rt2x00dev->intf_associated = 0; __set_bit(DEVICE_STARTED, &rt2x00dev->flags); + __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); return 0; } @@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); - if (!rt2x00dev->hw->conf.radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); + retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + if (retval) + goto exit; /* * Iterator over each active interface to diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index f2c9b0e..c5fb3a72 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** - * rt2x00queue_free_skb - free a skb - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to free. - */ -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); - -/** * rt2x00queue_write_tx_frame - Write TX frame to hardware * @queue: Queue over which the frame should be send * @skb: The skb to send diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index f1dcbaa..c3ee4ec 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; @@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, (struct ieee80211_rts *)(skb->data)); if (rt2x00queue_write_tx_frame(queue, skb)) { + dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } @@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; enum data_queue_qid qid = skb_get_queue_mapping(skb); - struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct data_queue *queue; u16 frame_control; @@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } } - /* - * XXX: This is as wrong as the old mac80211 code was, - * due to beacons not getting sequence numbers assigned - * properly. - */ - if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - intf->seqno += 0x10; - ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - } - if (rt2x00queue_write_tx_frame(queue, skb)) { ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; @@ -322,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; + int force_reconfig; /* * Mac80211 might be calling this function while we are trying @@ -341,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); } - rt2x00lib_config(rt2x00dev, conf, 0); + /* + * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently + * been started and the configuration must be forced upon the hardware. + * Otherwise registers will not be intialized correctly and could + * result in non-working hardware because essential registers aren't + * initialized. + */ + force_reconfig = + __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + + rt2x00lib_config(rt2x00dev, conf, force_reconfig); /* * Reenable RX only if the radio should be on. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7f44203..3b27f6a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); @@ -200,6 +201,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, } /* + * Hardware should insert sequence counter. + * FIXME: We insert a software sequence counter first for + * hardware that doesn't support hardware sequence counting. + * + * This is wrong because beacons are not getting sequence + * numbers assigned properly. + * + * A secondary problem exists for drivers that cannot toggle + * sequence counting per-frame, since those will override the + * sequence counter given by mac80211. + */ + if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + spin_lock(&intf->lock); + + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock(&intf->lock); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); + } + + /* * PLCP setup * Length calculation depends on OFDM/CCK rate. */ @@ -466,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_rxentry) return; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, &queue->entries[i]); + } } void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) @@ -482,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_txentry) continue; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_txentry(rt2x00dev, &queue->entries[i]); + } } } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 8945945..a4a8c57 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -199,6 +199,7 @@ struct txdone_entry_desc { * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. @@ -210,6 +211,7 @@ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, ENTRY_TXD_CTS_FRAME, ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_GENERATE_SEQ, ENTRY_TXD_FIRST_FRAGMENT, ENTRY_TXD_MORE_FRAG, ENTRY_TXD_REQ_TIMESTAMP, diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 83862e7..933e6cc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout) +{ + int status = 0; + unsigned char *tb; + u16 off, len, bsize; + + mutex_lock(&rt2x00dev->usb_cache_mutex); + + tb = buffer; + off = offset; + len = buffer_length; + while (len && !status) { + bsize = min_t(u16, CSR_CACHE_SIZE, len); + status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, + requesttype, off, tb, + bsize, timeout); + + tb += bsize; + len -= bsize; + off += bsize; + } + + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); + /* * TX data handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index aad794ad..ee3875f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -70,8 +70,7 @@ /* * Cache size */ -#define CSR_CACHE_SIZE 8 -#define CSR_CACHE_SIZE_FIRMWARE 64 +#define CSR_CACHE_SIZE 64 /* * USB request types. @@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u16 buffer_length, const int timeout); /** + * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register start offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * + * This function is used to transfer register data in blocks larger + * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons. + */ +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout); + +/** * rt2x00usb_vendor_request_sw - Send single register command to device * @rt2x00dev: Pointer to &struct rt2x00_dev * @request: USB vendor command (See &enum rt2x00usb_vendor_request) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f7c1f92..fbe2a65 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); rt2x00_desc_write(txd, 1, word); @@ -2278,7 +2279,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index d383735..9761eaa 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, unsigned int i; int status; u32 reg; - const char *ptr = data; - char *cache; - int buflen; /* * Wait for stable hardware. @@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, /* * Write firmware to device. - * We setup a seperate cache for this action, - * since we are going to write larger chunks of data - * then normally used cache size. */ - cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL); - if (!cache) { - ERROR(rt2x00dev, "Failed to allocate firmware cache.\n"); - return -ENOMEM; - } - - for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { - buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - - memcpy(cache, ptr, buflen); - - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0, - cache, buflen, - REGISTER_TIMEOUT32(buflen)); - - ptr += buflen; - } - - kfree(cache); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, + data, len, + REGISTER_TIMEOUT32(len)); /* * Send firmware request to device to load firmware, @@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry) skbdesc->desc = entry->skb->data; /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ @@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry) * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, 0, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, beacon_base, + entry->skb->data, entry->skb->len, + REGISTER_TIMEOUT32(entry->skb->len)); /* * Clean up the beacon skb. @@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; |
