summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00')
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig2
-rw-r--r--drivers/net/wireless/rt2x00/rt2800.h81
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c431
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.h1
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c66
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c232
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h38
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c24
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h13
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00link.c39
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.h12
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.c21
13 files changed, 757 insertions, 208 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index a0a7854..299c387 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -163,7 +163,7 @@ config RT2800USB_RT53XX
depends on EXPERIMENTAL
---help---
This adds support for rt53xx wireless chipset family to the
- rt2800pci driver.
+ rt2800usb driver.
Supported chips: RT5370
config RT2800USB_UNKNOWN
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 2571a2f..063bfa8 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -68,6 +68,7 @@
#define RF3322 0x000c
#define RF3053 0x000d
#define RF5370 0x5370
+#define RF5372 0x5372
#define RF5390 0x5390
/*
@@ -965,6 +966,7 @@
* TX_PIN_CFG:
*/
#define TX_PIN_CFG 0x1328
+#define TX_PIN_CFG_PA_PE_DISABLE 0xfcfffff0
#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
@@ -985,6 +987,14 @@
#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
+#define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000)
+#define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000)
+#define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000)
+#define TX_PIN_CFG_PA_PE_G2_POL FIELD32(0x08000000)
+#define TX_PIN_CFG_LNA_PE_A2_EN FIELD32(0x10000000)
+#define TX_PIN_CFG_LNA_PE_G2_EN FIELD32(0x20000000)
+#define TX_PIN_CFG_LNA_PE_A2_POL FIELD32(0x40000000)
+#define TX_PIN_CFG_LNA_PE_G2_POL FIELD32(0x80000000)
/*
* TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
@@ -1627,6 +1637,7 @@ struct mac_iveiv_entry {
/*
* H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ * CMD_TOKEN: Command id, 0xff disable status reporting.
*/
#define H2M_MAILBOX_CSR 0x7010
#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
@@ -1636,6 +1647,8 @@ struct mac_iveiv_entry {
/*
* H2M_MAILBOX_CID:
+ * Free slots contain 0xff. MCU will store command's token to lowest free slot.
+ * If all slots are occupied status will be dropped.
*/
#define H2M_MAILBOX_CID 0x7014
#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
@@ -1645,6 +1658,7 @@ struct mac_iveiv_entry {
/*
* H2M_MAILBOX_STATUS:
+ * Command status will be saved to same slot as command id.
*/
#define H2M_MAILBOX_STATUS 0x701c
@@ -1796,6 +1810,14 @@ struct mac_iveiv_entry {
#define RFCSR2_RESCAL_EN FIELD8(0x80)
/*
+ * RFCSR 3:
+ */
+#define RFCSR3_K FIELD8(0x0f)
+/* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */
+#define RFCSR3_PA1_BIAS_CCK FIELD8(0x70);
+#define RFCSR3_PA2_CASCODE_BIAS_CCKK FIELD8(0x80);
+
+/*
* FRCSR 5:
*/
#define RFCSR5_R1 FIELD8(0x0c)
@@ -1811,10 +1833,12 @@ struct mac_iveiv_entry {
* RFCSR 7:
*/
#define RFCSR7_RF_TUNING FIELD8(0x01)
-#define RFCSR7_R02 FIELD8(0x07)
-#define RFCSR7_R3 FIELD8(0x08)
-#define RFCSR7_R45 FIELD8(0x30)
-#define RFCSR7_R67 FIELD8(0xc0)
+#define RFCSR7_BIT1 FIELD8(0x02)
+#define RFCSR7_BIT2 FIELD8(0x04)
+#define RFCSR7_BIT3 FIELD8(0x08)
+#define RFCSR7_BIT4 FIELD8(0x10)
+#define RFCSR7_BIT5 FIELD8(0x20)
+#define RFCSR7_BITS67 FIELD8(0xc0)
/*
* RFCSR 11:
@@ -1839,6 +1863,11 @@ struct mac_iveiv_entry {
#define RFCSR15_TX_LO2_EN FIELD8(0x08)
/*
+ * RFCSR 16:
+ */
+#define RFCSR16_TXMIXER_GAIN FIELD8(0x07)
+
+/*
* RFCSR 17:
*/
#define RFCSR17_TXMIXER_GAIN FIELD8(0x07)
@@ -1867,6 +1896,13 @@ struct mac_iveiv_entry {
#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
/*
+ * RFCSR 24:
+ */
+#define RFCSR24_TX_AGC_FC FIELD8(0x1f)
+#define RFCSR24_TX_H20M FIELD8(0x20)
+#define RFCSR24_TX_CALIB FIELD8(0x7f)
+
+/*
* RFCSR 27:
*/
#define RFCSR27_R1 FIELD8(0x03)
@@ -1887,6 +1923,7 @@ struct mac_iveiv_entry {
*/
#define RFCSR31_RX_AGC_FC FIELD8(0x1f)
#define RFCSR31_RX_H20M FIELD8(0x20)
+#define RFCSR31_RX_CALIB FIELD8(0x7f)
/*
* RFCSR 38:
@@ -2093,6 +2130,12 @@ struct mac_iveiv_entry {
#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
/*
+ * EEPROM TXMIXER GAIN A offset (note overlaps with EEPROM RSSI A2).
+ */
+#define EEPROM_TXMIXER_GAIN_A 0x0026
+#define EEPROM_TXMIXER_GAIN_A_VAL FIELD16(0x0007)
+
+/*
* EEPROM EIRP Maximum TX power values(unit: dbm)
*/
#define EEPROM_EIRP_MAX_TX_POWER 0x0027
@@ -2259,6 +2302,12 @@ struct mac_iveiv_entry {
/*
* MCU mailbox commands.
+ * MCU_SLEEP - go to power-save mode.
+ * arg1: 1: save as much power as possible, 0: save less power.
+ * status: 1: success, 2: already asleep,
+ * 3: maybe MAC is busy so can't finish this task.
+ * MCU_RADIO_OFF
+ * arg0: 0: do power-saving, NOT turn off radio.
*/
#define MCU_SLEEP 0x30
#define MCU_WAKEUP 0x31
@@ -2279,7 +2328,10 @@ struct mac_iveiv_entry {
/*
* MCU mailbox tokens
*/
-#define TOKEN_WAKUP 3
+#define TOKEN_SLEEP 1
+#define TOKEN_RADIO_OFF 2
+#define TOKEN_WAKEUP 3
+
/*
* DMA descriptor defines.
@@ -2422,4 +2474,23 @@ struct mac_iveiv_entry {
*/
#define EIRP_MAX_TX_POWER_LIMIT 0x50
+/*
+ * Number of TBTT intervals after which we have to adjust
+ * the hw beacon timer.
+ */
+#define BCN_TBTT_OFFSET 64
+
+/*
+ * RT2800 driver data structure
+ */
+struct rt2800_drv_data {
+ u8 calibration_bw20;
+ u8 calibration_bw40;
+ u8 bbp25;
+ u8 bbp26;
+ u8 txmixer_gain_24g;
+ u8 txmixer_gain_5g;
+ unsigned int tbtt_tick;
+};
+
#endif /* RT2800_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 7bef66d..6c0a12e 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -402,7 +402,8 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
if (rt2x00_is_pci(rt2x00dev)) {
if (rt2x00_rt(rt2x00dev, RT3572) ||
- rt2x00_rt(rt2x00dev, RT5390)) {
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_register_read(rt2x00dev, AUX_CTRL, &reg);
rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
@@ -412,18 +413,6 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
}
/*
- * Disable DMA, will be reenabled later when enabling
- * the radio.
- */
- rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
- rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
- rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
- rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
- rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
- rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
- rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
- /*
* Write firmware to the device.
*/
rt2800_drv_write_firmware(rt2x00dev, data, len);
@@ -444,10 +433,21 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
}
/*
+ * Disable DMA, will be reenabled later when enabling
+ * the radio.
+ */
+ rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+ rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+ /*
* Initialize firmware.
*/
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ if (rt2x00_is_usb(rt2x00dev))
+ rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
msleep(1);
return 0;
@@ -1646,10 +1646,14 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
struct rf_channel *rf,
struct channel_info *info)
{
- u8 rfcsr;
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u8 rfcsr, calib_tx, calib_rx;
rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
- rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
+
+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3);
+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
@@ -1663,16 +1667,82 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
+ if (rt2x00_rt(rt2x00dev, RT3390)) {
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
+ rt2x00dev->default_ant.rx_chain_num == 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
+ rt2x00dev->default_ant.tx_chain_num == 1);
+ } else {
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
+
+ switch (rt2x00dev->default_ant.tx_chain_num) {
+ case 1:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
+ /* fall through */
+ case 2:
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
+ break;
+ }
+
+ switch (rt2x00dev->default_ant.rx_chain_num) {
+ case 1:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
+ /* fall through */
+ case 2:
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
+ break;
+ }
+ }
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+ msleep(1);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
- rt2800_rfcsr_write(rt2x00dev, 24,
- rt2x00dev->calibration[conf_is_ht40(conf)]);
+ if (rt2x00_rt(rt2x00dev, RT3390)) {
+ calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f;
+ calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f;
+ } else {
+ if (conf_is_ht40(conf)) {
+ calib_tx = drv_data->calibration_bw40;
+ calib_rx = drv_data->calibration_bw40;
+ } else {
+ calib_tx = drv_data->calibration_bw20;
+ calib_rx = drv_data->calibration_bw20;
+ }
+ }
+
+ rt2800_rfcsr_read(rt2x00dev, 24, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx);
+ rt2800_rfcsr_write(rt2x00dev, 24, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx);
+ rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+ msleep(1);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
}
static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
@@ -1680,12 +1750,13 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
struct rf_channel *rf,
struct channel_info *info)
{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
u8 rfcsr;
u32 reg;
if (rf->channel <= 14) {
- rt2800_bbp_write(rt2x00dev, 25, 0x15);
- rt2800_bbp_write(rt2x00dev, 26, 0x85);
+ rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
+ rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
} else {
rt2800_bbp_write(rt2x00dev, 25, 0x09);
rt2800_bbp_write(rt2x00dev, 26, 0xff);
@@ -1713,8 +1784,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
if (rf->channel <= 14) {
rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
- (info->default_power1 & 0x3) |
- ((info->default_power1 & 0xC) << 1));
+ info->default_power1);
} else {
rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
@@ -1727,8 +1797,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
if (rf->channel <= 14) {
rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
- (info->default_power2 & 0x3) |
- ((info->default_power2 & 0xC) << 1));
+ info->default_power2);
} else {
rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
@@ -1738,11 +1807,12 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
if (rf->channel <= 14) {
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
@@ -1773,10 +1843,13 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
- rt2800_rfcsr_write(rt2x00dev, 24,
- rt2x00dev->calibration[conf_is_ht40(conf)]);
- rt2800_rfcsr_write(rt2x00dev, 31,
- rt2x00dev->calibration[conf_is_ht40(conf)]);
+ if (conf_is_ht40(conf)) {
+ rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40);
+ rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40);
+ } else {
+ rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20);
+ rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20);
+ }
if (rf->channel <= 14) {
rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
@@ -1784,7 +1857,10 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
- rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
+ rfcsr = 0x4c;
+ rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
+ drv_data->txmixer_gain_24g);
+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
@@ -1793,12 +1869,20 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
} else {
- rt2800_rfcsr_write(rt2x00dev, 7, 0x14);
+ rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0);
+ rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0);
+ rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
- rt2800_rfcsr_write(rt2x00dev, 16, 0x7a);
+ rfcsr = 0x7a;
+ rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
+ drv_data->txmixer_gain_5g);
+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
if (rf->channel <= 64) {
rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
@@ -1906,7 +1990,8 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
r55_nonbt_rev[idx]);
rt2800_rfcsr_write(rt2x00dev, 59,
r59_nonbt_rev[idx]);
- } else if (rt2x00_rt(rt2x00dev, RT5390)) {
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
static const char r59_non_bt[] = {0x8f, 0x8f,
0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
@@ -1956,6 +2041,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
break;
case RF5370:
+ case RF5372:
case RF5390:
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
break;
@@ -1972,7 +2058,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 86, 0);
if (rf->channel <= 14) {
- if (!rt2x00_rt(rt2x00dev, RT5390)) {
+ if (!rt2x00_rt(rt2x00dev, RT5390) &&
+ !rt2x00_rt(rt2x00dev, RT5392)) {
if (test_bit(CAPABILITY_EXTERNAL_LNA_BG,
&rt2x00dev->cap_flags)) {
rt2800_bbp_write(rt2x00dev, 82, 0x62);
@@ -2414,6 +2501,80 @@ void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
+void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
+{
+ u32 tx_pin;
+ u8 rfcsr;
+
+ /*
+ * A voltage-controlled oscillator(VCO) is an electronic oscillator
+ * designed to be controlled in oscillation frequency by a voltage
+ * input. Maybe the temperature will affect the frequency of
+ * oscillation to be shifted. The VCO calibration will be called
+ * periodically to adjust the frequency to be precision.
+ */
+
+ rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
+ tx_pin &= TX_PIN_CFG_PA_PE_DISABLE;
+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+ switch (rt2x00dev->chip.rf) {
+ case RF2020:
+ case RF3020:
+ case RF3021:
+ case RF3022:
+ case RF3320:
+ case RF3052:
+ rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+ rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
+ break;
+ case RF5370:
+ case RF5372:
+ case RF5390:
+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+ break;
+ default:
+ return;
+ }
+
+ mdelay(1);
+
+ rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
+ if (rt2x00dev->rf_channel <= 14) {
+ switch (rt2x00dev->default_ant.tx_chain_num) {
+ case 3:
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
+ /* fall through */
+ case 2:
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+ /* fall through */
+ case 1:
+ default:
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+ break;
+ }
+ } else {
+ switch (rt2x00dev->default_ant.tx_chain_num) {
+ case 3:
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
+ /* fall through */
+ case 2:
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+ /* fall through */
+ case 1:
+ default:
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
+ break;
+ }
+ }
+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+}
+EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
+
static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
@@ -2502,7 +2663,8 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT3390) ||
- rt2x00_rt(rt2x00dev, RT5390))
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
return 0x1c + (2 * rt2x00dev->lna_gain);
else
return 0x2e + rt2x00dev->lna_gain;
@@ -2637,7 +2799,8 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
} else if (rt2x00_rt(rt2x00dev, RT3572)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
- } else if (rt2x00_rt(rt2x00dev, RT5390)) {
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -3013,7 +3176,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_wait_bbp_ready(rt2x00dev)))
return -EACCES;
- if (rt2x00_rt(rt2x00dev, RT5390)) {
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_bbp_read(rt2x00dev, 4, &value);
rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
rt2800_bbp_write(rt2x00dev, 4, value);
@@ -3021,19 +3185,22 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
if (rt2800_is_305x_soc(rt2x00dev) ||
rt2x00_rt(rt2x00dev, RT3572) ||
- rt2x00_rt(rt2x00dev, RT5390))
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 31, 0x08);
rt2800_bbp_write(rt2x00dev, 65, 0x2c);
rt2800_bbp_write(rt2x00dev, 66, 0x38);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 68, 0x0b);
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
rt2800_bbp_write(rt2x00dev, 69, 0x16);
rt2800_bbp_write(rt2x00dev, 73, 0x12);
- } else if (rt2x00_rt(rt2x00dev, RT5390)) {
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_bbp_write(rt2x00dev, 69, 0x12);
rt2800_bbp_write(rt2x00dev, 73, 0x13);
rt2800_bbp_write(rt2x00dev, 75, 0x46);
@@ -3051,7 +3218,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT3390) ||
rt2x00_rt(rt2x00dev, RT3572) ||
- rt2x00_rt(rt2x00dev, RT5390)) {
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_bbp_write(rt2x00dev, 79, 0x13);
rt2800_bbp_write(rt2x00dev, 80, 0x05);
rt2800_bbp_write(rt2x00dev, 81, 0x33);
@@ -3063,64 +3231,88 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
}
rt2800_bbp_write(rt2x00dev, 82, 0x62);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 83, 0x7a);
else
rt2800_bbp_write(rt2x00dev, 83, 0x6a);
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
rt2800_bbp_write(rt2x00dev, 84, 0x19);
- else if (rt2x00_rt(rt2x00dev, RT5390))
+ else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 84, 0x9a);
else
rt2800_bbp_write(rt2x00dev, 84, 0x99);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 86, 0x38);
else
rt2800_bbp_write(rt2x00dev, 86, 0x00);
+ if (rt2x00_rt(rt2x00dev, RT5392))
+ rt2800_bbp_write(rt2x00dev, 88, 0x90);
+
rt2800_bbp_write(rt2x00dev, 91, 0x04);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 92, 0x02);
else
rt2800_bbp_write(rt2x00dev, 92, 0x00);
+ if (rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2800_bbp_write(rt2x00dev, 95, 0x9a);
+ rt2800_bbp_write(rt2x00dev, 98, 0x12);
+ }
+
if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) ||
rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) ||
rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392) ||
rt2800_is_305x_soc(rt2x00dev))
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
else
rt2800_bbp_write(rt2x00dev, 103, 0x00);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 104, 0x92);
if (rt2800_is_305x_soc(rt2x00dev))
rt2800_bbp_write(rt2x00dev, 105, 0x01);
- else if (rt2x00_rt(rt2x00dev, RT5390))
+ else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 105, 0x3c);
else
rt2800_bbp_write(rt2x00dev, 105, 0x05);
if (rt2x00_rt(rt2x00dev, RT5390))
rt2800_bbp_write(rt2x00dev, 106, 0x03);
+ else if (rt2x00_rt(rt2x00dev, RT5392))
+ rt2800_bbp_write(rt2x00dev, 106, 0x12);
else
rt2800_bbp_write(rt2x00dev, 106, 0x35);
- if (rt2x00_rt(rt2x00dev, RT5390))
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))
rt2800_bbp_write(rt2x00dev, 128, 0x12);
+ if (rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2800_bbp_write(rt2x00dev, 134, 0xd0);
+ rt2800_bbp_write(rt2x00dev, 135, 0xf6);
+ }
+
if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT3390) ||
rt2x00_rt(rt2x00dev, RT3572) ||
- rt2x00_rt(rt2x00dev, RT5390)) {
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_bbp_read(rt2x00dev, 138, &value);
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
@@ -3132,7 +3324,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 138, value);
}
- if (rt2x00_rt(rt2x00dev, RT5390)) {
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
int ant, div_mode;
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
@@ -3247,6 +3440,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
u8 rfcsr;
u8 bbp;
u32 reg;
@@ -3258,13 +3452,15 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
!rt2x00_rt(rt2x00dev, RT3390) &&
!rt2x00_rt(rt2x00dev, RT3572) &&
!rt2x00_rt(rt2x00dev, RT5390) &&
+ !rt2x00_rt(rt2x00dev, RT5392) &&
!rt2800_is_305x_soc(rt2x00dev))
return 0;
/*
* Init RF calibration.
*/
- if (rt2x00_rt(rt2x00dev, RT5390)) {
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
@@ -3482,6 +3678,66 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
+ } else if (rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2800_rfcsr_write(rt2x00dev, 1, 0x17);
+ rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
+ rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
+ rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x4d);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 21, 0x8d);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
+ rt2800_rfcsr_write(rt2x00dev, 23, 0x0b);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x44);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 32, 0x20);
+ rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
+ rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
+ rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
+ rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
+ rt2800_rfcsr_write(rt2x00dev, 40, 0x0f);
+ rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
+ rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
+ rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
+ rt2800_rfcsr_write(rt2x00dev, 47, 0x0c);
+ rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
+ rt2800_rfcsr_write(rt2x00dev, 50, 0x94);
+ rt2800_rfcsr_write(rt2x00dev, 51, 0x3a);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
+ rt2800_rfcsr_write(rt2x00dev, 53, 0x44);
+ rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xa1);
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
+ rt2800_rfcsr_write(rt2x00dev, 59, 0x07);
+ rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
+ rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
+ rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
+ rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
}
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
@@ -3535,21 +3791,28 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
* Set RX Filter calibration for 20MHz and 40MHz
*/
if (rt2x00_rt(rt2x00dev, RT3070)) {
- rt2x00dev->calibration[0] =
+ drv_data->calibration_bw20 =
rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
- rt2x00dev->calibration[1] =
+ drv_data->calibration_bw40 =
rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
} else if (rt2x00_rt(rt2x00dev, RT3071) ||
rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT3390) ||
rt2x00_rt(rt2x00dev, RT3572)) {
- rt2x00dev->calibration[0] =
+ drv_data->calibration_bw20 =
rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x13);
- rt2x00dev->calibration[1] =
+ drv_data->calibration_bw40 =
rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
}
- if (!rt2x00_rt(rt2x00dev, RT5390)) {
+ /*
+ * Save BBP 25 & 26 values for later use in channel switching
+ */
+ rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
+ rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
+
+ if (!rt2x00_rt(rt2x00dev, RT5390) &&
+ !rt2x00_rt(rt2x00dev, RT5392)) {
/*
* Set back to initial state
*/
@@ -3577,7 +3840,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(&reg, OPT_14_CSR_BIT0, 1);
rt2800_register_write(rt2x00dev, OPT_14_CSR, reg);
- if (!rt2x00_rt(rt2x00dev, RT5390)) {
+ if (!rt2x00_rt(rt2x00dev, RT5390) &&
+ !rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
if (rt2x00_rt(rt2x00dev, RT3070) ||
@@ -3588,11 +3852,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
&rt2x00dev->cap_flags))
rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
}
- rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
- if (rt2x00_get_field16(eeprom, EEPROM_TXMIXER_GAIN_BG_VAL) >= 1)
- rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
- rt2x00_get_field16(eeprom,
- EEPROM_TXMIXER_GAIN_BG_VAL));
+ rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
+ drv_data->txmixer_gain_24g);
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
}
@@ -3645,7 +3906,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
}
- if (rt2x00_rt(rt2x00dev, RT5390)) {
+ if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392)) {
rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
@@ -3800,6 +4062,7 @@ EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
u16 word;
u8 *mac;
u8 default_lna_gain;
@@ -3883,6 +4146,14 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
+ if ((word & 0x00ff) != 0x00ff) {
+ drv_data->txmixer_gain_24g =
+ rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
+ } else {
+ drv_data->txmixer_gain_24g = 0;
+ }
+
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
@@ -3892,6 +4163,14 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
default_lna_gain);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
+ if ((word & 0x00ff) != 0x00ff) {
+ drv_data->txmixer_gain_5g =
+ rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
+ } else {
+ drv_data->txmixer_gain_5g = 0;
+ }
+
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
@@ -3929,7 +4208,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
* RT53xx: defined in "EEPROM_CHIP_ID" field
*/
rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
- if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390)
+ if (rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5390 ||
+ rt2x00_get_field32(reg, MAC_CSR0_CHIPSET) == RT5392)
rt2x00_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &value);
else
value = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
@@ -3947,9 +4227,10 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RT3390:
case RT3572:
case RT5390:
+ case RT5392:
break;
default:
- ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+ ERROR(rt2x00dev, "Invalid RT chipset 0x%04x detected.\n", rt2x00dev->chip.rt);
return -ENODEV;
}
@@ -3965,10 +4246,11 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RF3052:
case RF3320:
case RF5370:
+ case RF5372:
case RF5390:
break;
default:
- ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n",
+ ERROR(rt2x00dev, "Invalid RF chipset 0x%04x detected.\n",
rt2x00dev->chip.rf);
return -ENODEV;
}
@@ -4218,7 +4500,9 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
- IEEE80211_HW_AMPDU_AGGREGATION;
+ IEEE80211_HW_AMPDU_AGGREGATION |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+
/*
* Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
* unless we are capable of sending the buffered frames out after the
@@ -4271,6 +4555,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_rf(rt2x00dev, RF3022) ||
rt2x00_rf(rt2x00dev, RF3320) ||
rt2x00_rf(rt2x00dev, RF5370) ||
+ rt2x00_rf(rt2x00dev, RF5372) ||
rt2x00_rf(rt2x00dev, RF5390)) {
spec->num_channels = 14;
spec->channels = rf_vals_3x;
@@ -4347,6 +4632,20 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
}
}
+ switch (rt2x00dev->chip.rf) {
+ case RF2020:
+ case RF3020:
+ case RF3021:
+ case RF3022:
+ case RF3320:
+ case RF3052:
+ case RF5370:
+ case RF5372:
+ case RF5390:
+ __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
+ break;
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 8c3c281..419e36c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -184,6 +184,7 @@ void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
const u32 count);
void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev);
+void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev);
int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev);
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index dc88bae..0397bbf 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -480,7 +480,8 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
if (rt2x00_is_pcie(rt2x00dev) &&
(rt2x00_rt(rt2x00dev, RT3572) ||
- rt2x00_rt(rt2x00dev, RT5390))) {
+ rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392))) {
rt2x00pci_register_read(rt2x00dev, AUX_CTRL, &reg);
rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
@@ -489,7 +490,7 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
- rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ reg = 0;
rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
@@ -501,11 +502,27 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
{
+ int retval;
+
if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
rt2800pci_init_queues(rt2x00dev)))
return -EIO;
- return rt2800_enable_radio(rt2x00dev);
+ retval = rt2800_enable_radio(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /* After resume MCU_BOOT_SIGNAL will trash these. */
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+
+ rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_RADIO_OFF, 0xff, 0x02);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_RADIO_OFF);
+
+ rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, 0, 0);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
+
+ return retval;
}
static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
@@ -521,14 +538,16 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
if (state == STATE_AWAKE) {
- rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02);
- rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+ rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP,
+ 0, 0x02);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
} else if (state == STATE_SLEEP) {
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
0xffffffff);
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID,
0xffffffff);
- rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01);
+ rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP,
+ 0xff, 0x01);
}
return 0;
@@ -541,13 +560,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
switch (state) {
case STATE_RADIO_ON:
- /*
- * Before the radio can be enabled, the device first has
- * to be woken up. After that it needs a bit of time
- * to be fully awake and then the radio can be enabled.
- */
- rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
- msleep(1);
retval = rt2800pci_enable_radio(rt2x00dev);
break;
case STATE_RADIO_OFF:
@@ -797,7 +809,33 @@ static void rt2800pci_pretbtt_tasklet(unsigned long data)
static void rt2800pci_tbtt_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ u32 reg;
+
rt2x00lib_beacondone(rt2x00dev);
+
+ if (rt2x00dev->intf_ap_count) {
+ /*
+ * The rt2800pci hardware tbtt timer is off by 1us per tbtt
+ * causing beacon skew and as a result causing problems with
+ * some powersaving clients over time. Shorten the beacon
+ * interval every 64 beacons by 64us to mitigate this effect.
+ */
+ if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) {
+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+ (rt2x00dev->beacon_int * 16) - 1);
+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ } else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) {
+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+ (rt2x00dev->beacon_int * 16));
+ rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ }
+ drv_data->tbtt_tick++;
+ drv_data->tbtt_tick %= BCN_TBTT_OFFSET;
+ }
+
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
}
@@ -1050,6 +1088,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
+ .vco_calibration = rt2800_vco_calibration,
.start_queue = rt2800pci_start_queue,
.kick_queue = rt2800pci_kick_queue,
.stop_queue = rt2800pci_stop_queue,
@@ -1093,6 +1132,7 @@ static const struct data_queue_desc rt2800pci_queue_bcn = {
static const struct rt2x00_ops rt2800pci_ops = {
.name = KBUILD_MODNAME,
+ .drv_data_size = sizeof(struct rt2800_drv_data),
.max_sta_intf = 1,
.max_ap_intf = 8,
.eeprom_size = EEPROM_SIZE,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 262ee9e..cd490ab 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -114,45 +114,103 @@ static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
return false;
}
+static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
+{
+ bool tout;
+
+ if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
+ return false;
+
+ tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
+ if (unlikely(tout))
+ WARNING(entry->queue->rt2x00dev,
+ "TX status timeout for entry %d in queue %d\n",
+ entry->entry_idx, entry->queue->qid);
+ return tout;
+
+}
+
+static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ struct queue_entry *entry;
+
+ tx_queue_for_each(rt2x00dev, queue) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+ if (rt2800usb_entry_txstatus_timeout(entry))
+ return true;
+ }
+ return false;
+}
+
static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
int urb_status, u32 tx_status)
{
+ bool valid;
+
if (urb_status) {
- WARNING(rt2x00dev, "rt2x00usb_register_read_async failed: %d\n", urb_status);
- return false;
+ WARNING(rt2x00dev, "TX status read failed %d\n", urb_status);
+
+ goto stop_reading;
}
- /* try to read all TX_STA_FIFO entries before scheduling txdone_work */
- if (rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID)) {
- if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status)) {
- WARNING(rt2x00dev, "TX status FIFO overrun, "
- "drop tx status report.\n");
- queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
- } else
- return true;
- } else if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) {
+ valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID);
+ if (valid) {
+ if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status))
+ WARNING(rt2x00dev, "TX status FIFO overrun\n");
+
queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
+
+ /* Reschedule urb to read TX status again instantly */
+ return true;
} else if (rt2800usb_txstatus_pending(rt2x00dev)) {
- mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
+ /* Read register after 250 us */
+ hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000),
+ HRTIMER_MODE_REL);
+ return false;
}
- return false;
+stop_reading:
+ clear_bit(TX_STATUS_READING, &rt2x00dev->flags);
+ /*
+ * There is small race window above, between txstatus pending check and
+ * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
+ * here again if status reading is needed.
+ */
+ if (rt2800usb_txstatus_pending(rt2x00dev) &&
+ test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
+ return true;
+ else
+ return false;
+}
+
+static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
+{
+
+ if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
+ return;
+
+ /* Read TX_STA_FIFO register after 500 us */
+ hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 500000),
+ HRTIMER_MODE_REL);
}
static void rt2800usb_tx_dma_done(struct queue_entry *entry)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
- rt2800usb_tx_sta_fifo_read_completed);
+ rt2800usb_async_read_tx_status(rt2x00dev);
}
-static void rt2800usb_tx_sta_fifo_timeout(unsigned long data)
+static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
{
- struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ struct rt2x00_dev *rt2x00dev =
+ container_of(timer, struct rt2x00_dev, txstatus_timer);
rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
rt2800usb_tx_sta_fifo_read_completed);
+
+ return HRTIMER_NORESTART;
}
/*
@@ -226,9 +284,7 @@ static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
- rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
- rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ reg = 0;
rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
@@ -440,35 +496,26 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
/*
* TX control handlers
*/
-static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
+static enum txdone_entry_desc_flags
+rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
{
__le32 *txwi;
u32 word;
int wcid, ack, pid;
- int tx_wcid, tx_ack, tx_pid;
-
- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
- !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) {
- WARNING(entry->queue->rt2x00dev,
- "Data pending for entry %u in queue %u\n",
- entry->entry_idx, entry->queue->qid);
- cond_resched();
- return false;
- }
-
- wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
- ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+ int tx_wcid, tx_ack, tx_pid, is_agg;
/*
* This frames has returned with an IO error,
* so the status report is not intended for this
* frame.
*/
- if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) {
- rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
- return false;
- }
+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ return TXDONE_FAILURE;
+
+ wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+ ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+ pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+ is_agg = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
/*
* Validate if this TX status report is intended for
@@ -481,15 +528,14 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
- if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) {
+ if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
WARNING(entry->queue->rt2x00dev,
"TX status report missed for queue %d entry %d\n",
- entry->queue->qid, entry->entry_idx);
- rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
- return false;
+ entry->queue->qid, entry->entry_idx);
+ return TXDONE_UNKNOWN;
}
- return true;
+ return TXDONE_SUCCESS;
}
static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
@@ -498,47 +544,44 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
struct queue_entry *entry;
u32 reg;
u8 qid;
+ enum txdone_entry_desc_flags done_status;
while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
-
- /* TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus
- * qid is guaranteed to be one of the TX QIDs
+ /*
+ * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
+ * guaranteed to be one of the TX QIDs .
*/
qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
- if (unlikely(!queue)) {
- WARNING(rt2x00dev, "Got TX status for an unavailable "
+
+ if (unlikely(rt2x00queue_empty(queue))) {
+ WARNING(rt2x00dev, "Got TX status for an empty "
"queue %u, dropping\n", qid);
- continue;
+ break;
}
- /*
- * Inside each queue, we process each entry in a chronological
- * order. We first check that the queue is not empty.
- */
- entry = NULL;
- while (!rt2x00queue_empty(queue)) {
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (rt2800usb_txdone_entry_check(entry, reg))
- break;
- entry = NULL;
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+ if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
+ WARNING(rt2x00dev, "Data pending for entry %u "
+ "in queue %u\n", entry->entry_idx, qid);
+ break;
}
- if (entry)
- rt2800_txdone_entry(entry, reg,
- rt2800usb_get_txwi(entry));
+ done_status = rt2800usb_txdone_entry_check(entry, reg);
+ if (likely(done_status == TXDONE_SUCCESS))
+ rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
+ else
+ rt2x00lib_txdone_noinfo(entry, done_status);
}
}
-static void rt2800usb_work_txdone(struct work_struct *work)
+static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
{
- struct rt2x00_dev *rt2x00dev =
- container_of(work, struct rt2x00_dev, txdone_work);
struct data_queue *queue;
struct queue_entry *entry;
- rt2800usb_txdone(rt2x00dev);
-
/*
* Process any trailing TX status reports for IO failures,
* we loop until we find the first non-IO error entry. This
@@ -556,20 +599,34 @@ static void rt2800usb_work_txdone(struct work_struct *work)
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
- else if (rt2x00queue_status_timeout(entry))
+ else if (rt2800usb_entry_txstatus_timeout(entry))
rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
else
break;
}
}
+}
- /*
- * The hw may delay sending the packet after DMA complete
- * if the medium is busy, thus the TX_STA_FIFO entry is
- * also delayed -> use a timer to retrieve it.
- */
- if (rt2800usb_txstatus_pending(rt2x00dev))
- mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
+static void rt2800usb_work_txdone(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, txdone_work);
+
+ while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
+ rt2800usb_txstatus_timeout(rt2x00dev)) {
+
+ rt2800usb_txdone(rt2x00dev);
+
+ rt2800usb_txdone_nostatus(rt2x00dev);
+
+ /*
+ * The hw may delay sending the packet after DMA complete
+ * if the medium is busy, thus the TX_STA_FIFO entry is
+ * also delayed -> use a timer to retrieve it.
+ */
+ if (rt2800usb_txstatus_pending(rt2x00dev))
+ rt2800usb_async_read_tx_status(rt2x00dev);
+ }
}
/*
@@ -711,9 +768,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
- setup_timer(&rt2x00dev->txstatus_timer,
- rt2800usb_tx_sta_fifo_timeout,
- (unsigned long) rt2x00dev);
+ rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
/*
* Set the rssi offset.
@@ -783,6 +838,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
+ .vco_calibration = rt2800_vco_calibration,
.watchdog = rt2800usb_watchdog,
.start_queue = rt2800usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
@@ -814,7 +870,7 @@ static const struct data_queue_desc rt2800usb_queue_rx = {
};
static const struct data_queue_desc rt2800usb_queue_tx = {
- .entry_num = 64,
+ .entry_num = 16,
.data_size = AGGREGATION_SIZE,
.desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
.priv_size = sizeof(struct queue_entry_priv_usb),
@@ -829,6 +885,7 @@ static const struct data_queue_desc rt2800usb_queue_bcn = {
static const struct rt2x00_ops rt2800usb_ops = {
.name = KBUILD_MODNAME,
+ .drv_data_size = sizeof(struct rt2800_drv_data),
.max_sta_intf = 1,
.max_ap_intf = 8,
.eeprom_size = EEPROM_SIZE,
@@ -922,6 +979,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x07d1, 0x3c13) },
{ USB_DEVICE(0x07d1, 0x3c15) },
{ USB_DEVICE(0x07d1, 0x3c16) },
+ { USB_DEVICE(0x2001, 0x3c1b) },
/* Draytek */
{ USB_DEVICE(0x07fa, 0x7712) },
/* DVICO */
@@ -1101,12 +1159,26 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x5a57, 0x0284) },
#endif
#ifdef CONFIG_RT2800USB_RT53XX
+ /* Alpha */
+ { USB_DEVICE(0x2001, 0x3c15) },
+ { USB_DEVICE(0x2001, 0x3c19) },
+ /* Arcadyan */
+ { USB_DEVICE(0x043e, 0x7a12) },
/* Azurewave */
{ USB_DEVICE(0x13d3, 0x3329) },
{ USB_DEVICE(0x13d3, 0x3365) },
+ /* LG innotek */
+ { USB_DEVICE(0x043e, 0x7a22) },
+ /* Panasonic */
+ { USB_DEVICE(0x04da, 0x1801) },
+ { USB_DEVICE(0x04da, 0x1800) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x2104) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x5370) },
{ USB_DEVICE(0x148f, 0x5372) },
+ /* Unknown */
+ { USB_DEVICE(0x04da, 0x23f6) },
#endif
#ifdef CONFIG_RT2800USB_UNKNOWN
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index b03b22c..471f87ca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -38,7 +38,7 @@
#include <linux/etherdevice.h>
#include <linux/input-polldev.h>
#include <linux/kfifo.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
#include <net/mac80211.h>
@@ -192,6 +192,7 @@ struct rt2x00_chip {
#define RT3593 0x3593
#define RT3883 0x3883 /* WSOC */
#define RT5390 0x5390 /* 2.4GHz */
+#define RT5392 0x5392 /* 2.4GHz */
u16 rf;
u16 rev;
@@ -355,6 +356,11 @@ struct link {
* Work structure for scheduling periodic AGC adjustments.
*/
struct delayed_work agc_work;
+
+ /*
+ * Work structure for scheduling periodic VCO calibration.
+ */
+ struct delayed_work vco_work;
};
enum rt2x00_delayed_flags {
@@ -579,6 +585,7 @@ struct rt2x00lib_ops {
void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, const u32 count);
void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
+ void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
/*
* Data queue handlers.
@@ -647,6 +654,7 @@ struct rt2x00lib_ops {
*/
struct rt2x00_ops {
const char *name;
+ const unsigned int drv_data_size;
const unsigned int max_sta_intf;
const unsigned int max_ap_intf;
const unsigned int eeprom_size;
@@ -684,6 +692,12 @@ enum rt2x00_state_flags {
*/
CONFIG_CHANNEL_HT40,
CONFIG_POWERSAVING,
+
+ /*
+ * Mark we currently are sequentially reading TX_STA_FIFO register
+ * FIXME: this is for only rt2800usb, should go to private data
+ */
+ TX_STATUS_READING,
};
/*
@@ -721,6 +735,7 @@ enum rt2x00_capability_flags {
CAPABILITY_EXTERNAL_LNA_BG,
CAPABILITY_DOUBLE_ANTENNA,
CAPABILITY_BT_COEXIST,
+ CAPABILITY_VCO_RECALIBRATION,
};
/*
@@ -742,6 +757,11 @@ struct rt2x00_dev {
const struct rt2x00_ops *ops;
/*
+ * Driver data.
+ */
+ void *drv_data;
+
+ /*
* IEEE80211 control structure.
*/
struct ieee80211_hw *hw;
@@ -886,18 +906,11 @@ struct rt2x00_dev {
u8 rssi_offset;
/*
- * Frequency offset (for rt61pci & rt73usb).
+ * Frequency offset.
*/
u8 freq_offset;
/*
- * Calibration information (for rt2800usb & rt2800pci).
- * [0] -> BW20
- * [1] -> BW40
- */
- u8 calibration[2];
-
- /*
* Association id.
*/
u16 aid;
@@ -967,7 +980,7 @@ struct rt2x00_dev {
/*
* Timer to ensure tx status reports are read (rt2800usb).
*/
- struct timer_list txstatus_timer;
+ struct hrtimer txstatus_timer;
/*
* Tasklet for processing tx status reports (rt2800pci).
@@ -979,6 +992,11 @@ struct rt2x00_dev {
struct tasklet_struct autowake_tasklet;
/*
+ * Used for VCO periodic calibration.
+ */
+ int rf_channel;
+
+ /*
* Protect the interrupt mask register.
*/
spinlock_t irqmask_lock;
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index b704e5b..293676b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -102,7 +102,7 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
/* Update the AID, this is needed for dynamic PS support */
rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0;
- rt2x00dev->last_beacon = bss_conf->timestamp;
+ rt2x00dev->last_beacon = bss_conf->last_tsf;
/* Update global beacon interval time, this is needed for PS support */
rt2x00dev->beacon_int = bss_conf->beacon_int;
@@ -232,6 +232,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
memcpy(&libconf.channel,
&rt2x00dev->spec.channels_info[hw_value],
sizeof(libconf.channel));
+
+ /* Used for VCO periodic calibration */
+ rt2x00dev->rf_channel = libconf.rf.channel;
}
if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index fd356b7..fc9901e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -88,6 +88,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2x00queue_start_queues(rt2x00dev);
rt2x00link_start_tuner(rt2x00dev);
rt2x00link_start_agc(rt2x00dev);
+ if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
+ rt2x00link_start_vcocal(rt2x00dev);
/*
* Start watchdog monitoring.
@@ -111,6 +113,8 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
* Stop all queues
*/
rt2x00link_stop_agc(rt2x00dev);
+ if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
+ rt2x00link_stop_vcocal(rt2x00dev);
rt2x00link_stop_tuner(rt2x00dev);
rt2x00queue_stop_queues(rt2x00dev);
rt2x00queue_flush_queues(rt2x00dev, true);
@@ -1125,6 +1129,18 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
{
int retval = -ENOMEM;
+ /*
+ * Allocate the driver data memory, if necessary.
+ */
+ if (rt2x00dev->ops->drv_data_size > 0) {
+ rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size,
+ GFP_KERNEL);
+ if (!rt2x00dev->drv_data) {
+ retval = -ENOMEM;
+ goto exit;
+ }
+ }
+
spin_lock_init(&rt2x00dev->irqmask_lock);
mutex_init(&rt2x00dev->csr_mutex);
@@ -1220,7 +1236,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
cancel_work_sync(&rt2x00dev->sleep_work);
if (rt2x00_is_usb(rt2x00dev)) {
- del_timer_sync(&rt2x00dev->txstatus_timer);
+ hrtimer_cancel(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
cancel_work_sync(&rt2x00dev->txdone_work);
}
@@ -1266,6 +1282,12 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
* Free queue structures.
*/
rt2x00queue_free(rt2x00dev);
+
+ /*
+ * Free the driver data.
+ */
+ if (rt2x00dev->drv_data)
+ kfree(rt2x00dev->drv_data);
}
EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 4cdf247..78bd43b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -33,6 +33,7 @@
#define WATCHDOG_INTERVAL round_jiffies_relative(HZ)
#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
#define AGC_INTERVAL round_jiffies_relative(4 * HZ)
+#define VCO_INTERVAL round_jiffies_relative(10 * HZ) /* 10 sec */
/*
* rt2x00_rate: Per rate device information
@@ -278,12 +279,24 @@ void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev);
/**
+ * rt2x00link_start_vcocal - Start periodic VCO calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev);
+
+/**
* rt2x00link_stop_agc - Stop periodic gain calibration
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*/
void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev);
/**
+ * rt2x00link_stop_vcocal - Stop periodic VCO calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev);
+
+/**
* rt2x00link_register - Initialize link tuning & watchdog functionality
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index ea10b00..8368aab 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -447,11 +447,27 @@ void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev)
AGC_INTERVAL);
}
+void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev)
+{
+ struct link *link = &rt2x00dev->link;
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ rt2x00dev->ops->lib->vco_calibration)
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->vco_work,
+ VCO_INTERVAL);
+}
+
void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev)
{
cancel_delayed_work_sync(&rt2x00dev->link.agc_work);
}
+void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev)
+{
+ cancel_delayed_work_sync(&rt2x00dev->link.vco_work);
+}
+
static void rt2x00link_agc(struct work_struct *work)
{
struct rt2x00_dev *rt2x00dev =
@@ -473,9 +489,32 @@ static void rt2x00link_agc(struct work_struct *work)
AGC_INTERVAL);
}
+static void rt2x00link_vcocal(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, link.vco_work.work);
+ struct link *link = &rt2x00dev->link;
+
+ /*
+ * When the radio is shutting down we should
+ * immediately cease the VCO calibration.
+ */
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ rt2x00dev->ops->lib->vco_calibration(rt2x00dev);
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->vco_work,
+ VCO_INTERVAL);
+}
+
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
{
INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc);
+ if (test_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags))
+ INIT_DELAYED_WORK(&rt2x00dev->link.vco_work, rt2x00link_vcocal);
INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 349008d..5f1392c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -636,18 +636,6 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
{
return rt2x00queue_available(queue) < queue->threshold;
}
-
-/**
- * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports
- * @entry: Queue entry to check.
- */
-static inline int rt2x00queue_status_timeout(struct queue_entry *entry)
-{
- if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
- return false;
- return time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
-}
-
/**
* rt2x00queue_dma_timeout - Check if a timeout occurred for DMA transfers
* @entry: Queue entry to check.
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 2eea386..66094eb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -526,22 +526,6 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
rt2x00queue_flush_queue(queue, true);
}
-static void rt2x00usb_watchdog_tx_status(struct data_queue *queue)
-{
- WARNING(queue->rt2x00dev, "TX queue %d status timed out,"
- " invoke forced tx handler\n", queue->qid);
-
- queue_work(queue->rt2x00dev->workqueue, &queue->rt2x00dev->txdone_work);
-}
-
-static int rt2x00usb_status_timeout(struct data_queue *queue)
-{
- struct queue_entry *entry;
-
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- return rt2x00queue_status_timeout(entry);
-}
-
static int rt2x00usb_dma_timeout(struct data_queue *queue)
{
struct queue_entry *entry;
@@ -558,8 +542,6 @@ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
if (!rt2x00queue_empty(queue)) {
if (rt2x00usb_dma_timeout(queue))
rt2x00usb_watchdog_tx_dma(queue);
- if (rt2x00usb_status_timeout(queue))
- rt2x00usb_watchdog_tx_status(queue);
}
}
}
@@ -829,7 +811,8 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone);
INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone);
- init_timer(&rt2x00dev->txstatus_timer);
+ hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
retval = rt2x00usb_alloc_reg(rt2x00dev);
if (retval)
OpenPOWER on IntegriCloud