diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
26 files changed, 1882 insertions, 1735 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 95511ac..178b313 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -57,6 +57,7 @@ config RT2500USB tristate "Ralink rt2500 (USB) support" depends on USB select RT2X00_LIB_USB + select RT2X00_LIB_CRYPTO ---help--- This adds support for rt2500 wireless chipset family. Supported chips: RT2571 & RT2572. diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 08cb9ee..6a97767 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -49,45 +49,33 @@ * the access attempt is considered to have failed, * and we will print an error. */ -static u32 rt2400pci_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); - if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u32 reg; - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); - return; - } + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the data into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + } - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -95,66 +83,58 @@ static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, { u32 reg; - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - return; - } + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the request into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - *value = 0xff; - return; + WAIT_FOR_BBP(rt2x00dev, ®); } *value = rt2x00_get_field32(reg, BBPCSR_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, RFCSR, ®); - if (!rt2x00_get_field32(reg, RFCSR_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); - return; + mutex_lock(&rt2x00dev->csr_mutex); -rf_write: - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } - rt2x00pci_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom) @@ -188,43 +168,34 @@ static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom) } #ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt2400pci_read_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt2400pci_write_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - static const struct rt2x00debug rt2400pci_rt2x00debug = { .owner = THIS_MODULE, .csr = { - .read = rt2400pci_read_csr, - .write = rt2400pci_write_csr, + .read = rt2x00pci_register_read, + .write = rt2x00pci_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, .word_size = sizeof(u32), .word_count = CSR_REG_SIZE / sizeof(u32), }, .eeprom = { .read = rt2x00_eeprom_read, .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, .word_size = sizeof(u16), .word_count = EEPROM_SIZE / sizeof(u16), }, .bbp = { .read = rt2400pci_bbp_read, .write = rt2400pci_bbp_write, + .word_base = BBP_BASE, .word_size = sizeof(u8), .word_count = BBP_SIZE / sizeof(u8), }, .rf = { .read = rt2x00_rf_read, .write = rt2400pci_rf_write, + .word_base = RF_BASE, .word_size = sizeof(u32), .word_count = RF_SIZE / sizeof(u32), }, @@ -331,7 +302,7 @@ static void rt2400pci_config_intf(struct rt2x00_dev *rt2x00dev, /* * Enable beacon config */ - bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20); + bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); @@ -376,32 +347,94 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 10)); rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 20)); rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 55)); rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 110)); rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); + + rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates); + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + rt2x00pci_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); + rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); + rt2x00pci_register_write(rt2x00dev, CSR18, reg); + + rt2x00pci_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, erp->difs); + rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); + rt2x00pci_register_write(rt2x00dev, CSR19, reg); } -static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) +static void rt2400pci_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) { - rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask); + u8 r1; + u8 r4; + + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + rt2400pci_bbp_read(rt2x00dev, 4, &r4); + rt2400pci_bbp_read(rt2x00dev, 1, &r1); + + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); + break; + case ANTENNA_B: + default: + rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (ant->rx) { + case ANTENNA_HW_DIVERSITY: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); + break; + case ANTENNA_A: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); + break; + case ANTENNA_B: + default: + rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); + break; + } + + rt2400pci_bbp_write(rt2x00dev, 4, r4); + rt2400pci_bbp_write(rt2x00dev, 1, r1); } static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev, @@ -460,56 +493,17 @@ static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower) rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower)); } -static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) +static void rt2400pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) { - u8 r1; - u8 r4; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - rt2400pci_bbp_read(rt2x00dev, 4, &r4); - rt2400pci_bbp_read(rt2x00dev, 1, &r1); - - /* - * Configure the TX antenna. - */ - switch (ant->tx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - break; - } + u32 reg; - rt2400pci_bbp_write(rt2x00dev, 4, r4); - rt2400pci_bbp_write(rt2x00dev, 1, r1); + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_LONG_RETRY, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, CSR11_SHORT_RETRY, + libconf->conf->short_frame_max_tx_count); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); } static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, @@ -517,20 +511,6 @@ static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, libconf->slot_time); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - rt2x00pci_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, libconf->sifs); - rt2x00_set_field32(®, CSR18_PIFS, libconf->pifs); - rt2x00pci_register_write(rt2x00dev, CSR18, reg); - - rt2x00pci_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, libconf->difs); - rt2x00_set_field32(®, CSR19_EIFS, libconf->eifs); - rt2x00pci_register_write(rt2x00dev, CSR19, reg); - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); @@ -548,16 +528,14 @@ static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { - if (flags & CONFIG_UPDATE_PHYMODE) - rt2400pci_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2400pci_config_channel(rt2x00dev, &libconf->rf); - if (flags & CONFIG_UPDATE_TXPOWER) + if (flags & IEEE80211_CONF_CHANGE_POWER) rt2400pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt2400pci_config_antenna(rt2x00dev, &libconf->ant); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2400pci_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt2400pci_config_duration(rt2x00dev, libconf); } @@ -628,36 +606,47 @@ static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) /* * Initialization functions. */ -static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static bool rt2400pci_get_entry_state(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(entry_priv->desc, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); - rt2x00_desc_write(entry_priv->desc, 2, word); + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 1, word); + return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); + return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + rt2x00_get_field32(word, TXD_W0_VALID)); + } } -static void rt2400pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static void rt2400pci_clear_entry(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 2, &word); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); + rt2x00_desc_write(entry_priv->desc, 2, word); + + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); + + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(entry_priv->desc, 0, word); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(entry_priv->desc, 0, word); + } } static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) @@ -1313,10 +1302,8 @@ static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); } rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); @@ -1504,20 +1491,6 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - return 0; -} - static int rt2400pci_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params) { @@ -1576,7 +1549,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = { .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt2400pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2400pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, @@ -1589,8 +1561,8 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { .probe_hw = rt2400pci_probe_hw, .initialize = rt2x00pci_initialize, .uninitialize = rt2x00pci_uninitialize, - .init_rxentry = rt2400pci_init_rxentry, - .init_txentry = rt2400pci_init_txentry, + .get_entry_state = rt2400pci_get_entry_state, + .clear_entry = rt2400pci_clear_entry, .set_device_state = rt2400pci_set_device_state, .rfkill_poll = rt2400pci_rfkill_poll, .link_stats = rt2400pci_link_stats, @@ -1604,6 +1576,7 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { .config_filter = rt2400pci_config_filter, .config_intf = rt2400pci_config_intf, .config_erp = rt2400pci_config_erp, + .config_ant = rt2400pci_config_ant, .config = rt2400pci_config, }; diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index bbff381..9aefda4 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -46,7 +46,9 @@ #define CSR_REG_SIZE 0x014c #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0100 +#define BBP_BASE 0x0000 #define BBP_SIZE 0x0020 +#define RF_BASE 0x0000 #define RF_SIZE 0x0010 /* diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index ef42cc0..d3bc218 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -49,45 +49,33 @@ * the access attempt is considered to have failed, * and we will print an error. */ -static u32 rt2500pci_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); - if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u32 reg; - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); - return; - } + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the data into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + } - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -95,66 +83,58 @@ static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev, { u32 reg; - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - return; - } + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the request into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - *value = 0xff; - return; + WAIT_FOR_BBP(rt2x00dev, ®); } *value = rt2x00_get_field32(reg, BBPCSR_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, RFCSR, ®); - if (!rt2x00_get_field32(reg, RFCSR_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); - return; + mutex_lock(&rt2x00dev->csr_mutex); -rf_write: - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } - rt2x00pci_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom) @@ -188,43 +168,34 @@ static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom) } #ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt2500pci_read_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt2500pci_write_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - static const struct rt2x00debug rt2500pci_rt2x00debug = { .owner = THIS_MODULE, .csr = { - .read = rt2500pci_read_csr, - .write = rt2500pci_write_csr, + .read = rt2x00pci_register_read, + .write = rt2x00pci_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, .word_size = sizeof(u32), .word_count = CSR_REG_SIZE / sizeof(u32), }, .eeprom = { .read = rt2x00_eeprom_read, .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, .word_size = sizeof(u16), .word_count = EEPROM_SIZE / sizeof(u16), }, .bbp = { .read = rt2500pci_bbp_read, .write = rt2500pci_bbp_write, + .word_base = BBP_BASE, .word_size = sizeof(u8), .word_count = BBP_SIZE / sizeof(u8), }, .rf = { .read = rt2x00_rf_read, .write = rt2500pci_rf_write, + .word_base = RF_BASE, .word_size = sizeof(u32), .word_count = RF_SIZE / sizeof(u32), }, @@ -336,7 +307,7 @@ static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, /* * Enable beacon config */ - bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20); + bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, queue->cw_min); @@ -382,32 +353,114 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 10)); rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 20)); rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 55)); rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); + rt2x00_set_field32(®, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 110)); rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); + + rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates); + + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); + + rt2x00pci_register_read(rt2x00dev, CSR18, ®); + rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); + rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); + rt2x00pci_register_write(rt2x00dev, CSR18, reg); + + rt2x00pci_register_read(rt2x00dev, CSR19, ®); + rt2x00_set_field32(®, CSR19_DIFS, erp->difs); + rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); + rt2x00pci_register_write(rt2x00dev, CSR19, reg); } -static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) +static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) { - rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask); + u32 reg; + u8 r14; + u8 r2; + + /* + * We should never come here because rt2x00lib is supposed + * to catch this and send us the correct antenna explicitely. + */ + BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || + ant->tx == ANTENNA_SW_DIVERSITY); + + rt2x00pci_register_read(rt2x00dev, BBPCSR1, ®); + rt2500pci_bbp_read(rt2x00dev, 14, &r14); + rt2500pci_bbp_read(rt2x00dev, 2, &r2); + + /* + * Configure the TX antenna. + */ + switch (ant->tx) { + case ANTENNA_A: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); + rt2x00_set_field32(®, BBPCSR1_CCK, 0); + rt2x00_set_field32(®, BBPCSR1_OFDM, 0); + break; + case ANTENNA_B: + default: + rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); + rt2x00_set_field32(®, BBPCSR1_CCK, 2); + rt2x00_set_field32(®, BBPCSR1_OFDM, 2); + break; + } + + /* + * Configure the RX antenna. + */ + switch (ant->rx) { + case ANTENNA_A: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); + break; + case ANTENNA_B: + default: + rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); + break; + } + + /* + * RT2525E and RT5222 need to flip TX I/Q + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || + rt2x00_rf(&rt2x00dev->chip, RF5222)) { + rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); + rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); + rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); + + /* + * RT2525E does not need RX I/Q Flip. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) + rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); + } else { + rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); + rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); + } + + rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg); + rt2500pci_bbp_write(rt2x00dev, 14, r14); + rt2500pci_bbp_write(rt2x00dev, 2, r2); } static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, @@ -489,76 +542,17 @@ static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, rt2500pci_rf_write(rt2x00dev, 3, rf3); } -static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) +static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) { u32 reg; - u8 r14; - u8 r2; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - rt2x00pci_register_read(rt2x00dev, BBPCSR1, ®); - rt2500pci_bbp_read(rt2x00dev, 14, &r14); - rt2500pci_bbp_read(rt2x00dev, 2, &r2); - - /* - * Configure the TX antenna. - */ - switch (ant->tx) { - case ANTENNA_A: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); - rt2x00_set_field32(®, BBPCSR1_CCK, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field32(®, BBPCSR1_CCK, 2); - rt2x00_set_field32(®, BBPCSR1_OFDM, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_A: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - } - - /* - * RT2525E and RT5222 need to flip TX I/Q - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || - rt2x00_rf(&rt2x00dev->chip, RF5222)) { - rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); - /* - * RT2525E does not need RX I/Q Flip. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) - rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); - } else { - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); - } - - rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg); - rt2500pci_bbp_write(rt2x00dev, 14, r14); - rt2500pci_bbp_write(rt2x00dev, 2, r2); + rt2x00pci_register_read(rt2x00dev, CSR11, ®); + rt2x00_set_field32(®, CSR11_LONG_RETRY, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, CSR11_SHORT_RETRY, + libconf->conf->short_frame_max_tx_count); + rt2x00pci_register_write(rt2x00dev, CSR11, reg); } static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, @@ -566,20 +560,6 @@ static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, libconf->slot_time); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - rt2x00pci_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, libconf->sifs); - rt2x00_set_field32(®, CSR18_PIFS, libconf->pifs); - rt2x00pci_register_write(rt2x00dev, CSR18, reg); - - rt2x00pci_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, libconf->difs); - rt2x00_set_field32(®, CSR19_EIFS, libconf->eifs); - rt2x00pci_register_write(rt2x00dev, CSR19, reg); - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); @@ -597,17 +577,16 @@ static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { - if (flags & CONFIG_UPDATE_PHYMODE) - rt2500pci_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2500pci_config_channel(rt2x00dev, &libconf->rf, libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + if ((flags & IEEE80211_CONF_CHANGE_POWER) && + !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) rt2500pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt2500pci_config_antenna(rt2x00dev, &libconf->ant); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2500pci_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt2500pci_config_duration(rt2x00dev, libconf); } @@ -723,32 +702,43 @@ dynamic_cca_tune: /* * Initialization functions. */ -static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static bool rt2500pci_get_entry_state(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 1, word); + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 0, &word); + + return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); + return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + rt2x00_get_field32(word, TXD_W0_VALID)); + } } -static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static void rt2500pci_clear_entry(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); + + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(entry_priv->desc, 0, word); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(entry_priv->desc, 0, word); + } } static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) @@ -1451,11 +1441,8 @@ static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", - print_mac(macbuf, mac)); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); } rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); @@ -1830,20 +1817,6 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - return 0; -} - static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -1877,7 +1850,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = { .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt2500pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, @@ -1890,8 +1862,8 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .probe_hw = rt2500pci_probe_hw, .initialize = rt2x00pci_initialize, .uninitialize = rt2x00pci_uninitialize, - .init_rxentry = rt2500pci_init_rxentry, - .init_txentry = rt2500pci_init_txentry, + .get_entry_state = rt2500pci_get_entry_state, + .clear_entry = rt2500pci_clear_entry, .set_device_state = rt2500pci_set_device_state, .rfkill_poll = rt2500pci_rfkill_poll, .link_stats = rt2500pci_link_stats, @@ -1905,6 +1877,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .config_filter = rt2500pci_config_filter, .config_intf = rt2500pci_config_intf, .config_erp = rt2500pci_config_erp, + .config_ant = rt2500pci_config_ant, .config = rt2500pci_config, }; diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 8c26bef..e135247 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -57,7 +57,9 @@ #define CSR_REG_SIZE 0x0174 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0200 +#define BBP_BASE 0x0000 #define BBP_SIZE 0x0040 +#define RF_BASE 0x0000 #define RF_SIZE 0x0014 /* diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index d3bf7bb..30028e2 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -36,6 +36,13 @@ #include "rt2500usb.h" /* + * Allow hardware encryption to be disabled. + */ +static int modparam_nohwcrypt = 1; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * All access to the CSR registers will go through the methods * rt2500usb_register_read and rt2500usb_register_write. @@ -47,7 +54,7 @@ * between each attampt. When the busy bit is still set at that time, * the access attempt is considered to have failed, * and we will print an error. - * If the usb_cache_mutex is already held then the _lock variants must + * If the csr_mutex is already held then the _lock variants must * be used instead. */ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, @@ -57,7 +64,7 @@ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, __le16 reg; rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); *value = le16_to_cpu(reg); } @@ -68,7 +75,7 @@ static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev, __le16 reg; rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); *value = le16_to_cpu(reg); } @@ -89,7 +96,7 @@ static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, __le16 reg = cpu_to_le16(value); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); } static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, @@ -99,7 +106,7 @@ static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, __le16 reg = cpu_to_le16(value); rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); } static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, @@ -112,53 +119,53 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, REGISTER_TIMEOUT16(length)); } -static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev) +static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field16 field, + u16 *reg) { - u16 reg; unsigned int i; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR8, ®); - if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - break; + rt2500usb_register_read_lock(rt2x00dev, offset, reg); + if (!rt2x00_get_field16(*reg, field)) + return 1; udelay(REGISTER_BUSY_DELAY); } - return reg; + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; } +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg)) + static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u16 reg; - mutex_lock(&rt2x00dev->usb_cache_mutex); + mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_DATA, value); - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); - - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); - - mutex_unlock(&rt2x00dev->usb_cache_mutex); - - return; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field16(®, PHY_CSR7_DATA, value); + rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); + rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); -exit_fail: - mutex_unlock(&rt2x00dev->usb_cache_mutex); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); + } - ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -166,122 +173,107 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, { u16 reg; - mutex_lock(&rt2x00dev->usb_cache_mutex); + mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - goto exit_fail; - - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); + rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - goto exit_fail; + if (WAIT_FOR_BBP(rt2x00dev, ®)) + rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); + } - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - - return; - -exit_fail: - mutex_unlock(&rt2x00dev->usb_cache_mutex); - - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - *value = 0xff; + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u16 reg; - unsigned int i; if (!word) return; - mutex_lock(&rt2x00dev->usb_cache_mutex); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR10, ®); - if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } + mutex_lock(&rt2x00dev->csr_mutex); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg); - reg = 0; - rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); - rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); - rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); - rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); + reg = 0; + rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); + rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); + rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); + rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg); - rt2x00_rf_write(rt2x00dev, word, value); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } - mutex_unlock(&rt2x00dev->usb_cache_mutex); + mutex_unlock(&rt2x00dev->csr_mutex); } #ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) ) - -static void rt2500usb_read_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) +static void _rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) { - rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data); + rt2500usb_register_read(rt2x00dev, offset, (u16 *)value); } -static void rt2500usb_write_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) +static void _rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) { - rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data); + rt2500usb_register_write(rt2x00dev, offset, value); } static const struct rt2x00debug rt2500usb_rt2x00debug = { .owner = THIS_MODULE, .csr = { - .read = rt2500usb_read_csr, - .write = rt2500usb_write_csr, + .read = _rt2500usb_register_read, + .write = _rt2500usb_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, .word_size = sizeof(u16), .word_count = CSR_REG_SIZE / sizeof(u16), }, .eeprom = { .read = rt2x00_eeprom_read, .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, .word_size = sizeof(u16), .word_count = EEPROM_SIZE / sizeof(u16), }, .bbp = { .read = rt2500usb_bbp_read, .write = rt2500usb_bbp_write, + .word_base = BBP_BASE, .word_size = sizeof(u8), .word_count = BBP_SIZE / sizeof(u8), }, .rf = { .read = rt2x00_rf_read, .write = rt2500usb_rf_write, + .word_base = RF_BASE, .word_size = sizeof(u32), .word_count = RF_SIZE / sizeof(u32), }, @@ -338,6 +330,82 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev, /* * Configuration handlers. */ + +/* + * rt2500usb does not differentiate between shared and pairwise + * keys, so we should use the same function for both key types. + */ +static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + int timeout; + u32 mask; + u16 reg; + + if (crypto->cmd == SET_KEY) { + /* + * Pairwise key will always be entry 0, but this + * could collide with a shared key on the same + * position... + */ + mask = TXRX_CSR0_KEY_ID.bit_mask; + + rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); + reg &= mask; + + if (reg && reg == mask) + return -ENOSPC; + + reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID); + + key->hw_key_idx += reg ? ffz(reg) : 0; + + /* + * The encryption key doesn't fit within the CSR cache, + * this means we should allocate it seperately and use + * rt2x00usb_vendor_request() to send the key to the hardware. + */ + reg = KEY_ENTRY(key->hw_key_idx); + timeout = REGISTER_TIMEOUT32(sizeof(crypto->key)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, reg, + crypto->key, + sizeof(crypto->key), + timeout); + + /* + * The driver does not support the IV/EIV generation + * in hardware. However it doesn't support the IV/EIV + * inside the ieee80211 frame either, but requires it + * to be provided seperately for the descriptor. + * rt2x00lib will cut the IV/EIV data out of all frames + * given to us by mac80211, but we must tell mac80211 + * to generate the IV/EIV data. + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + } + + /* + * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate + * a particular key is valid. + */ + rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00_set_field16(®, TXRX_CSR0_ALGORITHM, crypto->cipher); + rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); + + mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID); + if (crypto->cmd == SET_KEY) + mask |= 1 << key->hw_key_idx; + else if (crypto->cmd == DISABLE_KEY) + mask &= ~(1 << key->hw_key_idx); + rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, mask); + rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); + + return 0; +} + static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev, const unsigned int filter_flags) { @@ -380,7 +448,7 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev, /* * Enable beacon config */ - bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20); + bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); rt2x00_set_field16(®, TXRX_CSR20_OFFSET, bcn_preload >> 6); rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, @@ -423,57 +491,16 @@ static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, !!erp->short_preamble); rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); -} - -static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask); -} - -static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - /* - * Set TXpower. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - - /* - * For RT2525E we should first set the channel to half band higher. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { - static const u32 vals[] = { - 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, - 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, - 0x000008ba, 0x000008be, 0x000008b7, 0x00000902, - 0x00000902, 0x00000906 - }; - - rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); - if (rf->rf4) - rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); - } - - rt2500usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2500usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2500usb_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); -} -static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 rf3; + rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates); - rt2x00_rf_read(rt2x00dev, 3, &rf3); - rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2500usb_rf_write(rt2x00dev, 3, rf3); + rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time); + rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs); + rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs); } -static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) +static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) { u8 r2; u8 r14; @@ -555,15 +582,52 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6); } +static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf, const int txpower) +{ + /* + * Set TXpower. + */ + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + + /* + * For RT2525E we should first set the channel to half band higher. + */ + if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { + static const u32 vals[] = { + 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, + 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, + 0x000008ba, 0x000008be, 0x000008b7, 0x00000902, + 0x00000902, 0x00000906 + }; + + rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); + if (rf->rf4) + rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); + } + + rt2500usb_rf_write(rt2x00dev, 1, rf->rf1); + rt2500usb_rf_write(rt2x00dev, 2, rf->rf2); + rt2500usb_rf_write(rt2x00dev, 3, rf->rf3); + if (rf->rf4) + rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); +} + +static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 rf3; + + rt2x00_rf_read(rt2x00dev, 3, &rf3); + rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2500usb_rf_write(rt2x00dev, 3, rf3); +} + static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { u16 reg; - rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time); - rt2500usb_register_write(rt2x00dev, MAC_CSR11, libconf->sifs); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, libconf->eifs); - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, libconf->conf->beacon_int * 4); @@ -574,17 +638,14 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, const unsigned int flags) { - if (flags & CONFIG_UPDATE_PHYMODE) - rt2500usb_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2500usb_config_channel(rt2x00dev, &libconf->rf, libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + if ((flags & IEEE80211_CONF_CHANGE_POWER) && + !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) rt2500usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt2500usb_config_antenna(rt2x00dev, &libconf->ant); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt2500usb_config_duration(rt2x00dev, libconf); } @@ -866,7 +927,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0xff); + rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0); rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); @@ -1088,7 +1149,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, * Start writing the descriptor words. */ rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); + rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs); rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); @@ -1101,6 +1162,11 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high); rt2x00_desc_write(txd, 2, word); + if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { + _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); + _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); + } + rt2x00_desc_read(txd, 0, &word); rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, @@ -1115,7 +1181,8 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); - rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); + rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher); + rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx); rt2x00_desc_write(txd, 0, word); } @@ -1130,7 +1197,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - int pipe = usb_sndbulkpipe(usb_dev, 1); + int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint); int length; u16 reg; @@ -1156,7 +1223,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); + length = rt2x00dev->ops->lib->get_tx_data_len(entry); usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe, entry->skb->data, length, rt2500usb_beacondone, @@ -1178,8 +1245,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC); } -static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) +static int rt2500usb_get_tx_data_len(struct queue_entry *entry) { int length; @@ -1187,8 +1253,8 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * The length _must_ be a multiple of 2, * but it must _not_ be a multiple of the USB packet size. */ - length = roundup(skb->len, 2); - length += (2 * !(length % rt2x00dev->usb_maxpacket)); + length = roundup(entry->skb->len, 2); + length += (2 * !(length % entry->queue->usb_maxpacket)); return length; } @@ -1227,6 +1293,7 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, static void rt2500usb_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_usb *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = @@ -1254,6 +1321,33 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; + if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER); + if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) + rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY; + } + + if (rxdesc->cipher != CIPHER_NONE) { + _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]); + _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]); + rxdesc->dev_flags |= RXDONE_CRYPTO_IV; + + /* ICV is located at the end of frame */ + + /* + * Hardware has stripped IV/EIV data from 802.11 frame during + * decryption. It has provided the data seperately but rt2x00lib + * should decide if it should be reinserted. + */ + rxdesc->flags |= RX_FLAG_IV_STRIPPED; + if (rxdesc->cipher != CIPHER_TKIP) + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) + rxdesc->flags |= RX_FLAG_DECRYPTED; + else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) + rxdesc->flags |= RX_FLAG_MMIC_ERROR; + } + /* * Obtain the status about this packet. * When frame was received with an OFDM bitrate, @@ -1261,8 +1355,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, * a CCK bitrate the signal is the rate in 100kbit/s. */ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - - entry->queue->rt2x00dev->rssi_offset; + rxdesc->rssi = + rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset; rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); if (rt2x00_get_field32(word0, RXD_W0_OFDM)) @@ -1319,10 +1413,8 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); } rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); @@ -1752,6 +1844,10 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + if (!modparam_nohwcrypt) { + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + __set_bit(CONFIG_CRYPTO_COPY_IV, &rt2x00dev->flags); + } __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); /* @@ -1771,6 +1867,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = { .config = rt2x00mac_config, .config_interface = rt2x00mac_config_interface, .configure_filter = rt2x00mac_configure_filter, + .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, @@ -1781,8 +1878,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .probe_hw = rt2500usb_probe_hw, .initialize = rt2x00usb_initialize, .uninitialize = rt2x00usb_uninitialize, - .init_rxentry = rt2x00usb_init_rxentry, - .init_txentry = rt2x00usb_init_txentry, + .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt2500usb_set_device_state, .link_stats = rt2500usb_link_stats, .reset_tuner = rt2500usb_reset_tuner, @@ -1793,9 +1889,12 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .get_tx_data_len = rt2500usb_get_tx_data_len, .kick_tx_queue = rt2500usb_kick_tx_queue, .fill_rxdone = rt2500usb_fill_rxdone, + .config_shared_key = rt2500usb_config_key, + .config_pairwise_key = rt2500usb_config_key, .config_filter = rt2500usb_config_filter, .config_intf = rt2500usb_config_intf, .config_erp = rt2500usb_config_erp, + .config_ant = rt2500usb_config_ant, .config = rt2500usb_config, }; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 89e5ed2..4347dfd 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -57,7 +57,9 @@ #define CSR_REG_SIZE 0x0100 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x006a +#define BBP_BASE 0x0000 #define BBP_SIZE 0x0060 +#define RF_BASE 0x0000 #define RF_SIZE 0x0014 /* @@ -445,6 +447,9 @@ #define SEC_CSR30 0x04bc #define SEC_CSR31 0x04be +#define KEY_ENTRY(__idx) \ + ( SEC_CSR0 + ((__idx) * 16) ) + /* * PHY control registers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 1359a37..39ecf3b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.2.1" +#define DRV_VERSION "2.2.3" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -92,6 +92,16 @@ DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args) /* + * Duration calculations + * The rate variable passed is: 100kbs. + * To convert from bytes to bits we multiply size with 8, + * then the size is multiplied with 10 to make the + * real rate -> rate argument correction. + */ +#define GET_DURATION(__size, __rate) (((__size) * 8 * 10) / (__rate)) +#define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate)) + +/* * Standard timing and size defines. * These values should follow the ieee80211 specifications. */ @@ -109,9 +119,9 @@ #define DIFS ( PIFS + SLOT_TIME ) #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) #define EIFS ( SIFS + DIFS + \ - (8 * (IEEE80211_HEADER + ACK_SIZE)) ) + GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) ) #define SHORT_EIFS ( SIFS + SHORT_DIFS + \ - (8 * (IEEE80211_HEADER + ACK_SIZE)) ) + GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) ) /* * Chipset identification @@ -348,13 +358,6 @@ struct rt2x00_intf { spinlock_t lock; /* - * BSS configuration. Copied from the structure - * passed to us through the bss_info_changed() - * callback funtion. - */ - struct ieee80211_bss_conf conf; - - /* * MAC of the device. */ u8 mac[ETH_ALEN]; @@ -433,18 +436,6 @@ struct rt2x00lib_conf { struct rf_channel rf; struct channel_info channel; - - struct antenna_setup ant; - - enum ieee80211_band band; - - u32 basic_rates; - u32 slot_time; - - short sifs; - short pifs; - short difs; - short eifs; }; /* @@ -456,6 +447,15 @@ struct rt2x00lib_erp { int ack_timeout; int ack_consume_time; + + u64 basic_rates; + + int slot_time; + + short sifs; + short pifs; + short difs; + short eifs; }; /* @@ -533,10 +533,8 @@ struct rt2x00lib_ops { /* * queue initialization handlers */ - void (*init_rxentry) (struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); - void (*init_txentry) (struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); + bool (*get_entry_state) (struct queue_entry *entry); + void (*clear_entry) (struct queue_entry *entry); /* * Radio control handlers. @@ -557,8 +555,7 @@ struct rt2x00lib_ops { struct txentry_desc *txdesc); int (*write_tx_data) (struct queue_entry *entry); void (*write_beacon) (struct queue_entry *entry); - int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb); + int (*get_tx_data_len) (struct queue_entry *entry); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, const enum data_queue_qid queue); @@ -589,16 +586,11 @@ struct rt2x00lib_ops { void (*config_erp) (struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp); + void (*config_ant) (struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant); void (*config) (struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf, - const unsigned int flags); -#define CONFIG_UPDATE_PHYMODE ( 1 << 1 ) -#define CONFIG_UPDATE_CHANNEL ( 1 << 2 ) -#define CONFIG_UPDATE_TXPOWER ( 1 << 3 ) -#define CONFIG_UPDATE_ANTENNA ( 1 << 4 ) -#define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 ) -#define CONFIG_UPDATE_BEACON_INT ( 1 << 6 ) -#define CONFIG_UPDATE_ALL 0xffff + const unsigned int changed_flags); }; /* @@ -661,6 +653,7 @@ enum rt2x00_flags { CONFIG_EXTERNAL_LNA_BG, CONFIG_DOUBLE_ANTENNA, CONFIG_DISABLE_LINK_TUNING, + CONFIG_CRYPTO_COPY_IV, }; /* @@ -738,8 +731,7 @@ struct rt2x00_dev { /* * This is the default TX/RX antenna setup as indicated - * by the device's EEPROM. When mac80211 sets its - * antenna value to 0 we should be using these values. + * by the device's EEPROM. */ struct antenna_setup default_ant; @@ -754,16 +746,15 @@ struct rt2x00_dev { } csr; /* - * Mutex to protect register accesses on USB devices. - * There are 2 reasons this is needed, one is to ensure - * use of the csr_cache (for USB devices) by one thread - * isn't corrupted by another thread trying to access it. - * The other is that access to BBP and RF registers - * require multiple BUS transactions and if another thread - * attempted to access one of those registers at the same - * time one of the writes could silently fail. + * Mutex to protect register accesses. + * For PCI and USB devices it protects against concurrent indirect + * register access (BBP, RF, MCU) since accessing those + * registers require multiple calls to the CSR registers. + * For USB devices it also protects the csr_cache since that + * field is used for normal CSR access and it cannot support + * multiple callers simultaneously. */ - struct mutex usb_cache_mutex; + struct mutex csr_mutex; /* * Current packet filter configuration for the device. @@ -808,14 +799,15 @@ struct rt2x00_dev { short lna_gain; /* - * USB Max frame size (for rt2500usb & rt73usb). + * Current TX power value. */ - u16 usb_maxpacket; + u16 tx_power; /* - * Current TX power value. + * Current retry values. */ - u16 tx_power; + u8 short_retry; + u8 long_retry; /* * Rssi <-> Dbm offset @@ -938,23 +930,6 @@ static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset, !!(chipset->rev & 0x0000f)); } -/* - * Duration calculations - * The rate variable passed is: 100kbs. - * To convert from bytes to bits we multiply size with 8, - * then the size is multiplied with 10 to make the - * real rate -> rate argument correction. - */ -static inline u16 get_duration(const unsigned int size, const u8 rate) -{ - return ((size * 8 * 10) / rate); -} - -static inline u16 get_duration_res(const unsigned int size, const u8 rate) -{ - return ((size * 8 * 10) % rate); -} - /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @rt2x00dev: Pointer to &struct rt2x00_dev. @@ -997,7 +972,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); void rt2x00mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); -int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); +int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed); int rt2x00mac_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_if_conf *conf); diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 4d5e87b..e66fb31 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -86,13 +86,14 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, erp.short_preamble = bss_conf->use_short_preamble; erp.cts_protection = bss_conf->use_cts_prot; - erp.ack_timeout = PLCP + get_duration(ACK_SIZE, 10); - erp.ack_consume_time = SIFS + PLCP + get_duration(ACK_SIZE, 10); + erp.slot_time = bss_conf->use_short_slot ? SHORT_SLOT_TIME : SLOT_TIME; + erp.sifs = SIFS; + erp.pifs = bss_conf->use_short_slot ? SHORT_PIFS : PIFS; + erp.difs = bss_conf->use_short_slot ? SHORT_DIFS : DIFS; + erp.eifs = bss_conf->use_short_slot ? SHORT_EIFS : EIFS; - if (rt2x00dev->hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) - erp.ack_timeout += SHORT_DIFS; - else - erp.ack_timeout += DIFS; + erp.ack_timeout = PLCP + erp.difs + GET_DURATION(ACK_SIZE, 10); + erp.ack_consume_time = SIFS + PLCP + GET_DURATION(ACK_SIZE, 10); if (bss_conf->use_short_preamble) { erp.ack_timeout += SHORT_PREAMBLE; @@ -102,19 +103,39 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, erp.ack_consume_time += PREAMBLE; } + erp.basic_rates = bss_conf->basic_rates; + rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp); } +static inline +enum antenna rt2x00lib_config_antenna_check(enum antenna current_ant, + enum antenna default_ant) +{ + if (current_ant != ANTENNA_SW_DIVERSITY) + return current_ant; + return (default_ant != ANTENNA_SW_DIVERSITY) ? default_ant : ANTENNA_B; +} + void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - enum antenna rx, enum antenna tx) + struct antenna_setup *ant) { - struct rt2x00lib_conf libconf; + struct antenna_setup *def = &rt2x00dev->default_ant; + struct antenna_setup *active = &rt2x00dev->link.ant.active; - libconf.ant.rx = rx; - libconf.ant.tx = tx; + /* + * Failsafe: Make sure we are not sending the + * ANTENNA_SW_DIVERSITY state to the driver. + * If that happes fallback to hardware default, + * or our own default. + * The calls to rt2x00lib_config_antenna_check() + * might have caused that we restore back to the already + * active setting. If that has happened we can quit. + */ + ant->rx = rt2x00lib_config_antenna_check(ant->rx, def->rx); + ant->tx = rt2x00lib_config_antenna_check(ant->tx, def->tx); - if (rx == rt2x00dev->link.ant.active.rx && - tx == rt2x00dev->link.ant.active.tx) + if (ant->rx == active->rx && ant->tx == active->tx) return; /* @@ -129,119 +150,28 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * The latter is required since we need to recalibrate the * noise-sensitivity ratio for the new setup. */ - rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA); + rt2x00dev->ops->lib->config_ant(rt2x00dev, ant); + rt2x00lib_reset_link_tuner(rt2x00dev); rt2x00_reset_link_ant_rssi(&rt2x00dev->link); - rt2x00dev->link.ant.active.rx = libconf.ant.rx; - rt2x00dev->link.ant.active.tx = libconf.ant.tx; + memcpy(active, ant, sizeof(*ant)); if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } -static u32 rt2x00lib_get_basic_rates(struct ieee80211_supported_band *band) -{ - const struct rt2x00_rate *rate; - unsigned int i; - u32 mask = 0; - - for (i = 0; i < band->n_bitrates; i++) { - rate = rt2x00_get_rate(band->bitrates[i].hw_value); - if (rate->flags & DEV_RATE_BASIC) - mask |= rate->ratemask; - } - - return mask; -} - void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, const int force_config) + struct ieee80211_conf *conf, + unsigned int ieee80211_flags) { struct rt2x00lib_conf libconf; - struct ieee80211_supported_band *band; - struct antenna_setup *default_ant = &rt2x00dev->default_ant; - struct antenna_setup *active_ant = &rt2x00dev->link.ant.active; - int flags = 0; - int short_slot_time; - - /* - * In some situations we want to force all configurations - * to be reloaded (When resuming for instance). - */ - if (force_config) { - flags = CONFIG_UPDATE_ALL; - goto config; - } - /* - * Check which configuration options have been - * updated and should be send to the device. - */ - if (rt2x00dev->rx_status.band != conf->channel->band) - flags |= CONFIG_UPDATE_PHYMODE; - if (rt2x00dev->rx_status.freq != conf->channel->center_freq) - flags |= CONFIG_UPDATE_CHANNEL; - if (rt2x00dev->tx_power != conf->power_level) - flags |= CONFIG_UPDATE_TXPOWER; - - /* - * Determining changes in the antenna setups request several checks: - * antenna_sel_{r,t}x = 0 - * -> Does active_{r,t}x match default_{r,t}x - * -> Is default_{r,t}x SW_DIVERSITY - * antenna_sel_{r,t}x = 1/2 - * -> Does active_{r,t}x match antenna_sel_{r,t}x - * The reason for not updating the antenna while SW diversity - * should be used is simple: Software diversity means that - * we should switch between the antenna's based on the - * quality. This means that the current antenna is good enough - * to work with untill the link tuner decides that an antenna - * switch should be performed. - */ - if (!conf->antenna_sel_rx && - default_ant->rx != ANTENNA_SW_DIVERSITY && - default_ant->rx != active_ant->rx) - flags |= CONFIG_UPDATE_ANTENNA; - else if (conf->antenna_sel_rx && - conf->antenna_sel_rx != active_ant->rx) - flags |= CONFIG_UPDATE_ANTENNA; - else if (active_ant->rx == ANTENNA_SW_DIVERSITY) - flags |= CONFIG_UPDATE_ANTENNA; - - if (!conf->antenna_sel_tx && - default_ant->tx != ANTENNA_SW_DIVERSITY && - default_ant->tx != active_ant->tx) - flags |= CONFIG_UPDATE_ANTENNA; - else if (conf->antenna_sel_tx && - conf->antenna_sel_tx != active_ant->tx) - flags |= CONFIG_UPDATE_ANTENNA; - else if (active_ant->tx == ANTENNA_SW_DIVERSITY) - flags |= CONFIG_UPDATE_ANTENNA; - - /* - * The following configuration options are never - * stored anywhere and will always be updated. - */ - flags |= CONFIG_UPDATE_SLOT_TIME; - flags |= CONFIG_UPDATE_BEACON_INT; - - /* - * We have determined what options should be updated, - * now precalculate device configuration values depending - * on what configuration options need to be updated. - */ -config: memset(&libconf, 0, sizeof(libconf)); - if (flags & CONFIG_UPDATE_PHYMODE) { - band = &rt2x00dev->bands[conf->channel->band]; - - libconf.band = conf->channel->band; - libconf.basic_rates = rt2x00lib_get_basic_rates(band); - } + libconf.conf = conf; - if (flags & CONFIG_UPDATE_CHANNEL) { + if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) { memcpy(&libconf.rf, &rt2x00dev->spec.channels[conf->channel->hw_value], sizeof(libconf.rf)); @@ -251,61 +181,23 @@ config: sizeof(libconf.channel)); } - if (flags & CONFIG_UPDATE_ANTENNA) { - if (conf->antenna_sel_rx) - libconf.ant.rx = conf->antenna_sel_rx; - else if (default_ant->rx != ANTENNA_SW_DIVERSITY) - libconf.ant.rx = default_ant->rx; - else if (active_ant->rx == ANTENNA_SW_DIVERSITY) - libconf.ant.rx = ANTENNA_B; - else - libconf.ant.rx = active_ant->rx; - - if (conf->antenna_sel_tx) - libconf.ant.tx = conf->antenna_sel_tx; - else if (default_ant->tx != ANTENNA_SW_DIVERSITY) - libconf.ant.tx = default_ant->tx; - else if (active_ant->tx == ANTENNA_SW_DIVERSITY) - libconf.ant.tx = ANTENNA_B; - else - libconf.ant.tx = active_ant->tx; - } - - if (flags & CONFIG_UPDATE_SLOT_TIME) { - short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; - - libconf.slot_time = - short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME; - libconf.sifs = SIFS; - libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; - libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; - libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS; - } - - libconf.conf = conf; - /* * Start configuration. */ - rt2x00dev->ops->lib->config(rt2x00dev, &libconf, flags); + rt2x00dev->ops->lib->config(rt2x00dev, &libconf, ieee80211_flags); /* * Some configuration changes affect the link quality * which means we need to reset the link tuner. */ - if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA)) + if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2x00lib_reset_link_tuner(rt2x00dev); - if (flags & CONFIG_UPDATE_PHYMODE) { - rt2x00dev->curr_band = conf->channel->band; - rt2x00dev->rx_status.band = conf->channel->band; - } - - rt2x00dev->rx_status.freq = conf->channel->center_freq; + rt2x00dev->curr_band = conf->channel->band; rt2x00dev->tx_power = conf->power_level; + rt2x00dev->short_retry = conf->short_frame_max_tx_count; + rt2x00dev->long_retry = conf->long_frame_max_tx_count; - if (flags & CONFIG_UPDATE_ANTENNA) { - rt2x00dev->link.ant.active.rx = libconf.ant.rx; - rt2x00dev->link.ant.active.tx = libconf.ant.tx; - } + rt2x00dev->rx_status.band = conf->channel->band; + rt2x00dev->rx_status.freq = conf->channel->center_freq; } diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 5a858e5..37ad0d2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -46,6 +46,29 @@ enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key) } } +void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; + + __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); + + txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); + + if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE) + __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); + + txdesc->key_idx = hw_key->hw_key_idx; + txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) + __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); + + if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) + __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); +} + unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) { struct ieee80211_key_conf *key = tx_info->control.hw_key; @@ -69,6 +92,18 @@ unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) return overhead; } +void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); + + if (unlikely(!iv_len)) + return; + + /* Copy IV/EIV data */ + memcpy(skbdesc->iv, skb->data + header_length, iv_len); +} + void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); @@ -78,10 +113,7 @@ void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) return; /* Copy IV/EIV data */ - if (iv_len >= 4) - memcpy(&skbdesc->iv, skb->data + header_length, 4); - if (iv_len >= 8) - memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4); + memcpy(skbdesc->iv, skb->data + header_length, iv_len); /* Move ieee80211 header */ memmove(skb->data + iv_len, skb->data, header_length); @@ -98,7 +130,7 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb); const unsigned int iv_len = - ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4); + ((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4); if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED)) return; @@ -109,10 +141,7 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb) memmove(skb->data, skb->data + iv_len, header_length); /* Copy IV/EIV data */ - if (iv_len >= 4) - memcpy(skb->data + header_length, &skbdesc->iv, 4); - if (iv_len >= 8) - memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4); + memcpy(skb->data + header_length, skbdesc->iv, iv_len); /* IV/EIV data has returned into the frame */ skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED; @@ -172,17 +201,9 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, header_length); transfer += header_length; - /* Copy IV data */ - if (iv_len >= 4) { - memcpy(skb->data + transfer, &rxdesc->iv, 4); - transfer += 4; - } - - /* Copy EIV data */ - if (iv_len >= 8) { - memcpy(skb->data + transfer, &rxdesc->eiv, 4); - transfer += 4; - } + /* Copy IV/EIV data */ + memcpy(skb->data + transfer, rxdesc->iv, iv_len); + transfer += iv_len; /* Move payload */ if (align) { @@ -198,16 +219,14 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, */ transfer += payload_len; - /* Copy ICV data */ - if (icv_len >= 4) { - memcpy(skb->data + transfer, &rxdesc->icv, 4); - /* - * AES appends 8 bytes, we can't fill the upper - * 4 bytes, but mac80211 doesn't care about what - * we provide here anyway and strips it immediately. - */ - transfer += icv_len; - } + /* + * Copy ICV data + * AES appends 8 bytes, we can't fill the upper + * 4 bytes, but mac80211 doesn't care about what + * we provide here anyway and strips it immediately. + */ + memcpy(skb->data + transfer, &rxdesc->icv, 4); + transfer += icv_len; /* IV/EIV/ICV has been inserted into frame */ rxdesc->size = transfer; diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 5cf4c85..54dd100 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -285,7 +285,7 @@ exit: } static unsigned int rt2x00debug_poll_queue_dump(struct file *file, - poll_table *wait) + poll_table *wait) { struct rt2x00debug_intf *intf = file->private_data; @@ -377,7 +377,7 @@ static ssize_t rt2x00debug_read_crypto_stats(struct file *file, if (*offset) return 0; - data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL); + data = kzalloc((1 + CIPHER_MAX) * MAX_LINE_LENGTH, GFP_KERNEL); if (!data) return -ENOMEM; @@ -424,16 +424,21 @@ static ssize_t rt2x00debug_read_##__name(struct file *file, \ const struct rt2x00debug *debug = intf->debug; \ char line[16]; \ size_t size; \ + unsigned int index = intf->offset_##__name; \ __type value; \ \ if (*offset) \ return 0; \ \ - if (intf->offset_##__name >= debug->__name.word_count) \ + if (index >= debug->__name.word_count) \ return -EINVAL; \ \ - debug->__name.read(intf->rt2x00dev, \ - intf->offset_##__name, &value); \ + if (debug->__name.flags & RT2X00DEBUGFS_OFFSET) \ + index *= debug->__name.word_size; \ + \ + index += debug->__name.word_base; \ + \ + debug->__name.read(intf->rt2x00dev, index, &value); \ \ size = sprintf(line, __format, value); \ \ @@ -454,12 +459,13 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \ const struct rt2x00debug *debug = intf->debug; \ char line[16]; \ size_t size; \ + unsigned int index = intf->offset_##__name; \ __type value; \ \ if (*offset) \ return 0; \ \ - if (intf->offset_##__name >= debug->__name.word_count) \ + if (index >= debug->__name.word_count) \ return -EINVAL; \ \ if (copy_from_user(line, buf, length)) \ @@ -468,8 +474,12 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \ size = strlen(line); \ value = simple_strtoul(line, NULL, 0); \ \ - debug->__name.write(intf->rt2x00dev, \ - intf->offset_##__name, value); \ + if (debug->__name.flags & RT2X00DEBUGFS_OFFSET) \ + index *= debug->__name.word_size; \ + \ + index += debug->__name.word_base; \ + \ + debug->__name.write(intf->rt2x00dev, index, value); \ \ *offset += size; \ return size; \ @@ -587,29 +597,29 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) intf->driver_folder = debugfs_create_dir(intf->rt2x00dev->ops->name, rt2x00dev->hw->wiphy->debugfsdir); - if (IS_ERR(intf->driver_folder)) + if (IS_ERR(intf->driver_folder) || !intf->driver_folder) goto exit; intf->driver_entry = rt2x00debug_create_file_driver("driver", intf, &intf->driver_blob); - if (IS_ERR(intf->driver_entry)) + if (IS_ERR(intf->driver_entry) || !intf->driver_entry) goto exit; intf->chipset_entry = rt2x00debug_create_file_chipset("chipset", intf, &intf->chipset_blob); - if (IS_ERR(intf->chipset_entry)) + if (IS_ERR(intf->chipset_entry) || !intf->chipset_entry) goto exit; intf->dev_flags = debugfs_create_file("dev_flags", S_IRUSR, intf->driver_folder, intf, &rt2x00debug_fop_dev_flags); - if (IS_ERR(intf->dev_flags)) + if (IS_ERR(intf->dev_flags) || !intf->dev_flags) goto exit; intf->register_folder = debugfs_create_dir("register", intf->driver_folder); - if (IS_ERR(intf->register_folder)) + if (IS_ERR(intf->register_folder) || !intf->register_folder) goto exit; #define RT2X00DEBUGFS_CREATE_REGISTER_ENTRY(__intf, __name) \ @@ -619,7 +629,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) S_IRUSR | S_IWUSR, \ (__intf)->register_folder, \ &(__intf)->offset_##__name); \ - if (IS_ERR((__intf)->__name##_off_entry)) \ + if (IS_ERR((__intf)->__name##_off_entry) \ + || !(__intf)->__name##_off_entry) \ goto exit; \ \ (__intf)->__name##_val_entry = \ @@ -627,7 +638,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) S_IRUSR | S_IWUSR, \ (__intf)->register_folder, \ (__intf), &rt2x00debug_fop_##__name);\ - if (IS_ERR((__intf)->__name##_val_entry)) \ + if (IS_ERR((__intf)->__name##_val_entry) \ + || !(__intf)->__name##_val_entry) \ goto exit; \ }) @@ -640,13 +652,14 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) intf->queue_folder = debugfs_create_dir("queue", intf->driver_folder); - if (IS_ERR(intf->queue_folder)) + if (IS_ERR(intf->queue_folder) || !intf->queue_folder) goto exit; intf->queue_frame_dump_entry = debugfs_create_file("dump", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_dump); - if (IS_ERR(intf->queue_frame_dump_entry)) + if (IS_ERR(intf->queue_frame_dump_entry) + || !intf->queue_frame_dump_entry) goto exit; skb_queue_head_init(&intf->frame_dump_skbqueue); diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h index c4ce895..a92104d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.h +++ b/drivers/net/wireless/rt2x00/rt2x00debug.h @@ -28,6 +28,16 @@ struct rt2x00_dev; +/** + * enum rt2x00debugfs_entry_flags: Flags for debugfs registry entry + * + * @RT2X00DEBUGFS_OFFSET: rt2x00lib should pass the register offset + * as argument when using the callback function read()/write() + */ +enum rt2x00debugfs_entry_flags { + RT2X00DEBUGFS_OFFSET = (1 << 0), +}; + #define RT2X00DEBUGFS_REGISTER_ENTRY(__name, __type) \ struct reg##__name { \ void (*read)(struct rt2x00_dev *rt2x00dev, \ @@ -35,6 +45,9 @@ struct reg##__name { \ void (*write)(struct rt2x00_dev *rt2x00dev, \ const unsigned int word, __type data); \ \ + unsigned int flags; \ + \ + unsigned int word_base; \ unsigned int word_size; \ unsigned int word_count; \ } __name diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 86840e3..6d92542 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -101,8 +101,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all data queues. */ - rt2x00queue_init_rx(rt2x00dev); - rt2x00queue_init_tx(rt2x00dev); + rt2x00queue_init_queues(rt2x00dev); /* * Enable radio. @@ -176,13 +175,14 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) { - enum antenna rx = rt2x00dev->link.ant.active.rx; - enum antenna tx = rt2x00dev->link.ant.active.tx; + struct antenna_setup ant; int sample_a = rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_A); int sample_b = rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_B); + memcpy(&ant, &rt2x00dev->link.ant.active, sizeof(ant)); + /* * We are done sampling. Now we should evaluate the results. */ @@ -200,21 +200,22 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) return; if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) - rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; + ant.rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) - tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; + ant.tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - rt2x00lib_config_antenna(rt2x00dev, rx, tx); + rt2x00lib_config_antenna(rt2x00dev, &ant); } static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) { - enum antenna rx = rt2x00dev->link.ant.active.rx; - enum antenna tx = rt2x00dev->link.ant.active.tx; + struct antenna_setup ant; int rssi_curr = rt2x00_get_link_ant_rssi(&rt2x00dev->link); int rssi_old = rt2x00_update_ant_rssi(&rt2x00dev->link, rssi_curr); + memcpy(&ant, &rt2x00dev->link.ant.active, sizeof(ant)); + /* * Legacy driver indicates that we should swap antenna's * when the difference in RSSI is greater that 5. This @@ -230,12 +231,12 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) - rx = (rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + ant.rx = (ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) - tx = (tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + ant.tx = (ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; - rt2x00lib_config_antenna(rt2x00dev, rx, tx); + rt2x00lib_config_antenna(rt2x00dev, &ant); } static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) @@ -249,11 +250,9 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.ant.flags &= ~ANTENNA_RX_DIVERSITY; rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY; - if (rt2x00dev->hw->conf.antenna_sel_rx == 0 && - rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) + if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY; - if (rt2x00dev->hw->conf.antenna_sel_tx == 0 && - rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) + if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY; if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && @@ -419,7 +418,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, */ spin_lock(&intf->lock); - memcpy(&conf, &intf->conf, sizeof(conf)); + memcpy(&conf, &vif->bss_conf, sizeof(conf)); delayed_flags = intf->delayed_flags; intf->delayed_flags = 0; @@ -500,7 +499,9 @@ void rt2x00lib_txdone(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + u8 rate_idx, rate_flags; /* * Unmap the skb. @@ -530,14 +531,18 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->link.qual.tx_failed += test_bit(TXDONE_FAILURE, &txdesc->flags); + rate_idx = skbdesc->tx_rate_idx; + rate_flags = skbdesc->tx_rate_flags; + /* * Initialize TX status */ memset(&tx_info->status, 0, sizeof(tx_info->status)); tx_info->status.ack_signal = 0; - tx_info->status.excessive_retries = - test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags); - tx_info->status.retry_count = txdesc->retry; + tx_info->status.rates[0].idx = rate_idx; + tx_info->status.rates[0].flags = rate_flags; + tx_info->status.rates[0].count = txdesc->retry + 1; + tx_info->status.rates[1].idx = -1; /* terminate */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) @@ -546,7 +551,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) rt2x00dev->low_level_stats.dot11RTSSuccessCount++; else if (test_bit(TXDONE_FAILURE, &txdesc->flags)) @@ -570,7 +575,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, entry->skb = NULL; entry->flags = 0; - rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry); + rt2x00dev->ops->lib->clear_entry(entry); clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); @@ -631,7 +636,8 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * provided seperately (through hardware descriptor) * in which case we should reinsert the data into the frame. */ - if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) { + if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && + (rxdesc.flags & RX_FLAG_IV_STRIPPED)) { rt2x00crypto_rx_insert_iv(entry->skb, align, header_length, &rxdesc); } else if (align) { @@ -702,7 +708,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, entry->skb = skb; entry->flags = 0; - rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry); + rt2x00dev->ops->lib->clear_entry(entry); rt2x00queue_index_inc(entry->queue, Q_INDEX); } @@ -713,31 +719,31 @@ EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); */ const struct rt2x00_rate rt2x00_supported_rates[12] = { { - .flags = DEV_RATE_CCK | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK, .bitrate = 10, .ratemask = BIT(0), .plcp = 0x00, }, { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 20, .ratemask = BIT(1), .plcp = 0x01, }, { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 55, .ratemask = BIT(2), .plcp = 0x02, }, { - .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC, + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, .bitrate = 110, .ratemask = BIT(3), .plcp = 0x03, }, { - .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .flags = DEV_RATE_OFDM, .bitrate = 60, .ratemask = BIT(4), .plcp = 0x0b, @@ -749,7 +755,7 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = { .plcp = 0x0f, }, { - .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .flags = DEV_RATE_OFDM, .bitrate = 120, .ratemask = BIT(6), .plcp = 0x0a, @@ -761,7 +767,7 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = { .plcp = 0x0e, }, { - .flags = DEV_RATE_OFDM | DEV_RATE_BASIC, + .flags = DEV_RATE_OFDM, .bitrate = 240, .ratemask = BIT(8), .plcp = 0x09, @@ -1046,16 +1052,24 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) { int retval = -ENOMEM; + mutex_init(&rt2x00dev->csr_mutex); + /* * Make room for rt2x00_intf inside the per-interface * structure ieee80211_vif. */ rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf); - rt2x00dev->hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_AP) | - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); + /* + * Determine which operating modes are supported, all modes + * which require beaconing, depend on the availability of + * beacon entries. + */ + rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + if (rt2x00dev->ops->bcn->entry_num > 0) + rt2x00dev->hw->wiphy->interface_modes |= + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP); /* * Let the driver probe the device to detect the capabilities. @@ -1247,7 +1261,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + retval = rt2x00mac_config(rt2x00dev->hw, ~0); if (retval) goto exit; diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index b362a1c..68f4e0fc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -72,49 +72,33 @@ void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi) } } -void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled) +static void rt2x00led_led_simple(struct rt2x00_led *led, bool enabled) { - struct rt2x00_led *led = &rt2x00dev->led_qual; - unsigned int brightness; + unsigned int brightness = enabled ? LED_FULL : LED_OFF; - if ((led->type != LED_TYPE_ACTIVITY) || !(led->flags & LED_REGISTERED)) + if (!(led->flags & LED_REGISTERED)) return; - brightness = enabled ? LED_FULL : LED_OFF; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } + led->led_dev.brightness_set(&led->led_dev, brightness); + led->led_dev.brightness = brightness; } -void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) +void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled) { - struct rt2x00_led *led = &rt2x00dev->led_assoc; - unsigned int brightness; - - if ((led->type != LED_TYPE_ASSOC) || !(led->flags & LED_REGISTERED)) - return; + if (rt2x00dev->led_qual.type == LED_TYPE_ACTIVITY) + rt2x00led_led_simple(&rt2x00dev->led_qual, enabled); +} - brightness = enabled ? LED_FULL : LED_OFF; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } +void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) +{ + if (rt2x00dev->led_assoc.type == LED_TYPE_ASSOC) + rt2x00led_led_simple(&rt2x00dev->led_assoc, enabled); } void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled) { - struct rt2x00_led *led = &rt2x00dev->led_radio; - unsigned int brightness; - - if ((led->type != LED_TYPE_RADIO) || !(led->flags & LED_REGISTERED)) - return; - - brightness = enabled ? LED_FULL : LED_OFF; - if (brightness != led->led_dev.brightness) { - led->led_dev.brightness_set(&led->led_dev, brightness); - led->led_dev.brightness = brightness; - } + if (rt2x00dev->led_radio.type == LED_TYPE_ASSOC) + rt2x00led_led_simple(&rt2x00dev->led_radio, enabled); } static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, @@ -125,6 +109,7 @@ static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, int retval; led->led_dev.name = name; + led->led_dev.brightness = LED_OFF; retval = led_classdev_register(device, &led->led_dev); if (retval) { @@ -199,7 +184,16 @@ exit_fail: static void rt2x00leds_unregister_led(struct rt2x00_led *led) { led_classdev_unregister(&led->led_dev); - led->led_dev.brightness_set(&led->led_dev, LED_OFF); + + /* + * This might look weird, but when we are unregistering while + * suspended the led is already off, and since we haven't + * fully resumed yet, access to the device might not be + * possible yet. + */ + if (!(led->led_dev.flags & LED_SUSPENDED)) + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->flags &= ~LED_REGISTERED; } @@ -213,22 +207,40 @@ void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev) rt2x00leds_unregister_led(&rt2x00dev->led_radio); } +static inline void rt2x00leds_suspend_led(struct rt2x00_led *led) +{ + led_classdev_suspend(&led->led_dev); + + /* This shouldn't be needed, but just to be safe */ + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->led_dev.brightness = LED_OFF; +} + void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev) { if (rt2x00dev->led_qual.flags & LED_REGISTERED) - led_classdev_suspend(&rt2x00dev->led_qual.led_dev); + rt2x00leds_suspend_led(&rt2x00dev->led_qual); if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - led_classdev_suspend(&rt2x00dev->led_assoc.led_dev); + rt2x00leds_suspend_led(&rt2x00dev->led_assoc); if (rt2x00dev->led_radio.flags & LED_REGISTERED) - led_classdev_suspend(&rt2x00dev->led_radio.led_dev); + rt2x00leds_suspend_led(&rt2x00dev->led_radio); +} + +static inline void rt2x00leds_resume_led(struct rt2x00_led *led) +{ + led_classdev_resume(&led->led_dev); + + /* Device might have enabled the LEDS during resume */ + led->led_dev.brightness_set(&led->led_dev, LED_OFF); + led->led_dev.brightness = LED_OFF; } void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev) { if (rt2x00dev->led_radio.flags & LED_REGISTERED) - led_classdev_resume(&rt2x00dev->led_radio.led_dev); + rt2x00leds_resume_led(&rt2x00dev->led_radio); if (rt2x00dev->led_assoc.flags & LED_REGISTERED) - led_classdev_resume(&rt2x00dev->led_assoc.led_dev); + rt2x00leds_resume_led(&rt2x00dev->led_assoc); if (rt2x00dev->led_qual.flags & LED_REGISTERED) - led_classdev_resume(&rt2x00dev->led_qual.led_dev); + rt2x00leds_resume_led(&rt2x00dev->led_qual); } diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 797eb61..0302432 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -43,7 +43,6 @@ struct rt2x00_rate { #define DEV_RATE_CCK 0x0001 #define DEV_RATE_OFDM 0x0002 #define DEV_RATE_SHORT_PREAMBLE 0x0004 -#define DEV_RATE_BASIC 0x0008 unsigned short bitrate; /* In 100kbit/s */ unsigned short ratemask; @@ -94,9 +93,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, struct ieee80211_bss_conf *conf); void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - enum antenna rx, enum antenna tx); + struct antenna_setup *ant); void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, const int force_config); + struct ieee80211_conf *conf, + const unsigned int changed_flags); /** * DOC: Queue handlers @@ -150,8 +150,16 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, */ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); -void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev); -void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev); +/** + * rt2x00queue_init_queues - Initialize all data queues + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * + * This function will loop through all available queues to clear all + * index numbers and set the queue entry to the correct initialization + * state. + */ +void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev); + int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev); void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev); int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev); @@ -210,7 +218,10 @@ static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, */ #ifdef CONFIG_RT2X00_LIB_CRYPTO enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key); +void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc); unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info); +void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len); void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len); void rt2x00crypto_tx_insert_iv(struct sk_buff *skb); void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align, @@ -222,11 +233,21 @@ static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf * return CIPHER_NONE; } +static inline void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ +} + static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info) { return 0; } +static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, + unsigned int iv_len) +{ +} + static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len) { @@ -242,7 +263,7 @@ static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, struct rxdone_entry_desc *rxdesc) { } -#endif +#endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* * RFkill handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 2c6cc5c..38edee5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -39,7 +39,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, unsigned int data_length; int retval = 0; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) data_length = sizeof(struct ieee80211_cts); else data_length = sizeof(struct ieee80211_rts); @@ -64,11 +64,11 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; - rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; @@ -79,12 +79,10 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, * RTS/CTS frame should use the length of the frame plus any * encryption overhead that will be added by the hardware. */ -#ifdef CONFIG_RT2X00_LIB_CRYPTO if (!frag_skb->do_not_encrypt) data_length += rt2x00crypto_tx_overhead(tx_info); -#endif /* CONFIG_RT2X00_LIB_CRYPTO */ - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); @@ -132,8 +130,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" "Please file bug report to %s.\n", qid, DRV_PROJECT); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + goto exit_fail; } /* @@ -146,8 +143,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * inside the hardware. */ frame_control = le16_to_cpu(ieee80211hdr->frame_control); - if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT)) && + if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | + IEEE80211_TX_RC_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { if (rt2x00queue_available(queue) <= 1) goto exit_fail; @@ -335,10 +332,10 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw, } EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); -int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) +int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed) { struct rt2x00_dev *rt2x00dev = hw->priv; - int radio_on; + struct ieee80211_conf *conf = &hw->conf; int status; /* @@ -355,7 +352,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) * some configuration parameters (e.g. channel and antenna values) can * only be set when the radio is enabled. */ - radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); if (conf->radio_enabled) { /* For programming the values, we have to turn RX off */ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); @@ -369,7 +365,18 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) * When we've just turned on the radio, we want to reprogram * everything to ensure a consistent state */ - rt2x00lib_config(rt2x00dev, conf, !radio_on); + rt2x00lib_config(rt2x00dev, conf, changed); + + /* + * The radio was enabled, configure the antenna to the + * default settings, the link tuner will later start + * continue configuring the antenna based on the software + * diversity. But for non-diversity configurations, we need + * to have configured the correct state now. + */ + if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) + rt2x00lib_config_antenna(rt2x00dev, + &rt2x00dev->default_ant); /* Turn RX back on */ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); @@ -480,12 +487,15 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, struct ieee80211_key_conf *key) { struct rt2x00_dev *rt2x00dev = hw->priv; + struct ieee80211_sta *sta; int (*set_key) (struct rt2x00_dev *rt2x00dev, struct rt2x00lib_crypto *crypto, struct ieee80211_key_conf *key); struct rt2x00lib_crypto crypto; - if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; + else if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) return -EOPNOTSUPP; else if (key->keylen > 32) return -ENOSPC; @@ -528,6 +538,17 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, memcpy(&crypto.key, &key->key[0], key->keylen); /* + * Discover the Association ID from mac80211. + * Some drivers need this information when updating the + * hardware key (either adding or removing). + */ + rcu_read_lock(); + sta = ieee80211_find_sta(hw, address); + if (sta) + crypto.aid = sta->aid; + rcu_read_unlock(); + + /* * Each BSS has a maximum of 4 shared keys. * Shared key index values: * 0) BSS0 key0 @@ -625,7 +646,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, * When the erp information has changed, we should perform * additional configuration steps. For all other changes we are done. */ - if (changes & (BSS_CHANGED_ERP_PREAMBLE | BSS_CHANGED_ERP_CTS_PROT)) { + if (changes & ~(BSS_CHANGED_ASSOC | BSS_CHANGED_HT)) { if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) rt2x00lib_config_erp(rt2x00dev, intf, bss_conf); else @@ -633,7 +654,6 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, } spin_lock(&intf->lock); - memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); if (delayed) { intf->delayed_flags |= delayed; schedule_work(&rt2x00dev->intf_work); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index adf2876..d52b22b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -32,24 +32,46 @@ #include "rt2x00pci.h" /* + * Register access. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg) +{ + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); + +/* * TX data handlers. */ int rt2x00pci_write_tx_data(struct queue_entry *entry) { + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc; - u32 word; - - rt2x00_desc_read(entry_priv->desc, 0, &word); /* * This should not happen, we already checked the entry * was ours. When the hardware disagrees there has been * a queue corruption! */ - if (unlikely(rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) || - rt2x00_get_field32(word, TXD_ENTRY_VALID))) { - ERROR(entry->queue->rt2x00dev, + if (unlikely(rt2x00dev->ops->lib->get_entry_state(entry))) { + ERROR(rt2x00dev, "Corrupt queue %d, accessing entry which is not ours.\n" "Please file bug report to %s.\n", entry->queue->qid, DRV_PROJECT); @@ -76,14 +98,12 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) struct queue_entry *entry; struct queue_entry_priv_pci *entry_priv; struct skb_frame_desc *skbdesc; - u32 word; while (1) { entry = rt2x00queue_get_entry(queue, Q_INDEX); entry_priv = entry->priv_data; - rt2x00_desc_read(entry_priv->desc, 0, &word); - if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) + if (rt2x00dev->ops->lib->get_entry_state(entry)) break; /* @@ -222,8 +242,7 @@ static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) { struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); - rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0), - pci_resource_len(pci_dev, 0)); + rt2x00dev->csr.base = pci_ioremap_bar(pci_dev, 0); if (!rt2x00dev->csr.base) goto exit; diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 80bf97c..9c0a4d7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -44,21 +44,10 @@ #define REGISTER_BUSY_DELAY 100 /* - * Descriptor availability flags. - * All PCI device descriptors have these 2 flags - * with the exact same definition. - * By storing them here we can use them inside rt2x00pci - * for some simple entry availability checking. - */ -#define TXD_ENTRY_OWNER_NIC FIELD32(0x00000001) -#define TXD_ENTRY_VALID FIELD32(0x00000002) -#define RXD_ENTRY_OWNER_NIC FIELD32(0x00000001) - -/* * Register access. */ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned long offset, + const unsigned int offset, u32 *value) { *value = readl(rt2x00dev->csr.base + offset); @@ -66,14 +55,14 @@ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned long offset, + const unsigned int offset, void *value, const u16 length) { memcpy_fromio(value, rt2x00dev->csr.base + offset, length); } static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned long offset, + const unsigned int offset, u32 value) { writel(value, rt2x00dev->csr.base + offset); @@ -81,13 +70,31 @@ static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned long offset, + const unsigned int offset, const void *value, const u16 length) { memcpy_toio(rt2x00dev->csr.base + offset, value, length); } /** + * rt2x00pci_regbusy_read - Read from register with busy check + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @field: Field to check if register is busy + * @reg: Pointer to where register contents should be stored + * + * This function will read the given register, and checks if the + * register is busy. If it is, it will sleep for a couple of + * microseconds before reading the register again. If the register + * is not read after a certain timeout, this function will return + * FALSE. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg); + +/** * rt2x00pci_write_tx_data - Initialize data for TX operation * @entry: The entry where the frame is located * diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 451d410..eaec6bd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -55,14 +55,12 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, /* * For IV/EIV/ICV assembly we must make sure there is * at least 8 bytes bytes available in headroom for IV/EIV - * and 4 bytes for ICV data as tailroon. + * and 8 bytes for ICV data as tailroon. */ -#ifdef CONFIG_RT2X00_LIB_CRYPTO if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { head_size += 8; - tail_size += 4; + tail_size += 8; } -#endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* * Allocate skbuffer. @@ -174,7 +172,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->cw_max = entry->queue->cw_max; txdesc->aifs = entry->queue->aifs; - /* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */ + /* Data length + CRC */ data_length = entry->skb->len + 4; /* @@ -183,34 +181,17 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) __set_bit(ENTRY_TXD_ACK, &txdesc->flags); -#ifdef CONFIG_RT2X00_LIB_CRYPTO if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) && !entry->skb->do_not_encrypt) { - struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; - - __set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags); - - txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key); - - if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE) - __set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags); - - txdesc->key_idx = hw_key->hw_key_idx; - txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb); + /* Apply crypto specific descriptor information */ + rt2x00crypto_create_tx_descriptor(entry, txdesc); /* * Extend frame length to include all encryption overhead * that will be added by the hardware. */ data_length += rt2x00crypto_tx_overhead(tx_info); - - if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV)) - __set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags); - - if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) - __set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags); } -#endif /* CONFIG_RT2X00_LIB_CRYPTO */ /* * Check if this is a RTS/CTS frame @@ -230,8 +211,8 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Determine retry information. */ - txdesc->retry_limit = tx_info->control.retry_limit; - if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + txdesc->retry_limit = tx_info->control.rates[0].count - 1; + if (txdesc->retry_limit >= rt2x00dev->long_retry) __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); /* @@ -312,8 +293,8 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, /* * Convert length to microseconds. */ - residual = get_duration_res(data_length, hwrate->bitrate); - duration = get_duration(data_length, hwrate->bitrate); + residual = GET_DURATION_RES(data_length, hwrate->bitrate); + duration = GET_DURATION(data_length, hwrate->bitrate); if (residual != 0) { duration++; @@ -371,13 +352,15 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info; struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; unsigned int iv_len = 0; + u8 rate_idx, rate_flags; if (unlikely(rt2x00queue_full(queue))) - return -EINVAL; + return -ENOBUFS; if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { ERROR(queue->rt2x00dev, @@ -399,13 +382,18 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len; /* - * All information is retreived from the skb->cb array, + * All information is retrieved from the skb->cb array, * now we should claim ownership of the driver part of that - * array. + * array, preserving the bitrate index and flags. */ - skbdesc = get_skb_frame_desc(entry->skb); + tx_info = IEEE80211_SKB_CB(skb); + rate_idx = tx_info->control.rates[0].idx; + rate_flags = tx_info->control.rates[0].flags; + skbdesc = get_skb_frame_desc(skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + skbdesc->tx_rate_idx = rate_idx; + skbdesc->tx_rate_flags = rate_flags; /* * When hardware encryption is supported, and this frame @@ -414,19 +402,21 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { - rt2x00crypto_tx_remove_iv(skb, iv_len); + if (test_bit(CONFIG_CRYPTO_COPY_IV, &queue->rt2x00dev->flags)) + rt2x00crypto_tx_copy_iv(skb, iv_len); + else + rt2x00crypto_tx_remove_iv(skb, iv_len); } /* * It could be possible that the queue was corrupted and this - * call failed. Just drop the frame, we cannot rollback and pass - * the frame to mac80211 because the skb->cb has now been tainted. + * call failed. Since we always return NETDEV_TX_OK to mac80211, + * this frame will simply be dropped. */ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - dev_kfree_skb_any(entry->skb); entry->skb = NULL; - return 0; + return -EIO; } if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) @@ -556,7 +546,7 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) queue->length++; } else if (index == Q_INDEX_DONE) { queue->length--; - queue->count ++; + queue->count++; } spin_unlock_irqrestore(&queue->lock, irqflags); @@ -575,40 +565,18 @@ static void rt2x00queue_reset(struct data_queue *queue) spin_unlock_irqrestore(&queue->lock, irqflags); } -void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) -{ - struct data_queue *queue = rt2x00dev->rx; - unsigned int i; - - rt2x00queue_reset(queue); - - if (!rt2x00dev->ops->lib->init_rxentry) - return; - - for (i = 0; i < queue->limit; i++) { - queue->entries[i].flags = 0; - - rt2x00dev->ops->lib->init_rxentry(rt2x00dev, - &queue->entries[i]); - } -} - -void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) +void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; unsigned int i; - txall_queue_for_each(rt2x00dev, queue) { + queue_for_each(rt2x00dev, queue) { rt2x00queue_reset(queue); - if (!rt2x00dev->ops->lib->init_txentry) - continue; - for (i = 0; i < queue->limit; i++) { queue->entries[i].flags = 0; - rt2x00dev->ops->lib->init_txentry(rt2x00dev, - &queue->entries[i]); + rt2x00dev->ops->lib->clear_entry(&queue->entries[i]); } } } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 9dbf04f..2829371 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -104,22 +104,25 @@ enum skb_frame_desc_flags { * * @flags: Frame flags, see &enum skb_frame_desc_flags. * @desc_len: Length of the frame descriptor. + * @tx_rate_idx: the index of the TX rate, used for TX status reporting + * @tx_rate_flags: the TX rate flags, used for TX status reporting * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. - * @iv: IV data used during encryption/decryption. - * @eiv: EIV data used during encryption/decryption. + * @iv: IV/EIV data used during encryption/decryption. * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { - unsigned int flags; + u8 flags; + + u8 desc_len; + u8 tx_rate_idx; + u8 tx_rate_flags; - unsigned int desc_len; void *desc; - __le32 iv; - __le32 eiv; + __le32 iv[2]; dma_addr_t skb_dma; @@ -143,11 +146,15 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value. * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value. * @RXDONE_MY_BSS: Does this frame originate from device's BSS. + * @RXDONE_CRYPTO_IV: Driver provided IV/EIV data. + * @RXDONE_CRYPTO_ICV: Driver provided ICV data. */ enum rxdone_entry_desc_flags { RXDONE_SIGNAL_PLCP = 1 << 0, RXDONE_SIGNAL_BITRATE = 1 << 1, RXDONE_MY_BSS = 1 << 2, + RXDONE_CRYPTO_IV = 1 << 3, + RXDONE_CRYPTO_ICV = 1 << 4, }; /** @@ -163,8 +170,7 @@ enum rxdone_entry_desc_flags { * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). * @cipher: Cipher type used during decryption. * @cipher_status: Decryption status. - * @iv: IV data used during decryption. - * @eiv: EIV data used during decryption. + * @iv: IV/EIV data used during decryption. * @icv: ICV data used during decryption. */ struct rxdone_entry_desc { @@ -177,8 +183,7 @@ struct rxdone_entry_desc { u8 cipher; u8 cipher_status; - __le32 iv; - __le32 eiv; + __le32 iv[2]; __le32 icv; }; @@ -375,6 +380,8 @@ enum queue_index { * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). * @data_size: Maximum data size for the frames in this queue. * @desc_size: Hardware descriptor size for the data in this queue. + * @usb_endpoint: Device endpoint used for communication (USB only) + * @usb_maxpacket: Max packet size for given endpoint (USB only) */ struct data_queue { struct rt2x00_dev *rt2x00dev; @@ -396,6 +403,9 @@ struct data_queue { unsigned short data_size; unsigned short desc_size; + + unsigned short usb_endpoint; + unsigned short usb_maxpacket; }; /** @@ -439,6 +449,19 @@ struct data_queue_desc { &(__dev)->tx[(__dev)->ops->tx_queues] /** + * queue_next - Return pointer to next queue in list (HELPER MACRO). + * @__queue: Current queue for which we need the next queue + * + * Using the current queue address we take the address directly + * after the queue to take the next queue. Note that this macro + * should be used carefully since it does not protect against + * moving past the end of the list. (See macros &queue_end and + * &tx_queue_end for determining the end of the queue). + */ +#define queue_next(__queue) \ + &(__queue)[1] + +/** * queue_loop - Loop through the queues within a specific range (HELPER MACRO). * @__entry: Pointer where the current queue entry will be stored in. * @__start: Start queue pointer. @@ -448,8 +471,8 @@ struct data_queue_desc { */ #define queue_loop(__entry, __start, __end) \ for ((__entry) = (__start); \ - prefetch(&(__entry)[1]), (__entry) != (__end); \ - (__entry) = &(__entry)[1]) + prefetch(queue_next(__entry)), (__entry) != (__end);\ + (__entry) = queue_next(__entry)) /** * queue_for_each - Loop through all queues diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index b73a7e0..83df312 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -79,7 +79,7 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, { int status; - BUG_ON(!mutex_is_locked(&rt2x00dev->usb_cache_mutex)); + BUG_ON(!mutex_is_locked(&rt2x00dev->csr_mutex)); /* * Check for Cache availability. @@ -110,13 +110,13 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, { int status; - mutex_lock(&rt2x00dev->usb_cache_mutex); + mutex_lock(&rt2x00dev->csr_mutex); status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, requesttype, offset, buffer, buffer_length, timeout); - mutex_unlock(&rt2x00dev->usb_cache_mutex); + mutex_unlock(&rt2x00dev->csr_mutex); return status; } @@ -132,7 +132,7 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, unsigned char *tb; u16 off, len, bsize; - mutex_lock(&rt2x00dev->usb_cache_mutex); + mutex_lock(&rt2x00dev->csr_mutex); tb = (char *)buffer; off = offset; @@ -148,12 +148,34 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, off += bsize; } - mutex_unlock(&rt2x00dev->usb_cache_mutex); + mutex_unlock(&rt2x00dev->csr_mutex); return status; } EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); +int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field32 field, + u32 *reg) +{ + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read_lock(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read); + /* * TX data handlers. */ @@ -212,10 +234,10 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry) * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); + length = rt2x00dev->ops->lib->get_tx_data_len(entry); usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_sndbulkpipe(usb_dev, 1), + usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint), entry->skb->data, length, rt2x00usb_interrupt_txdone, entry); @@ -351,28 +373,96 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); /* * Device initialization handlers. */ -void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +void rt2x00usb_clear_entry(struct queue_entry *entry) { - struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); + struct usb_device *usb_dev = + to_usb_device_intf(entry->queue->rt2x00dev->dev); struct queue_entry_priv_usb *entry_priv = entry->priv_data; + int pipe; - usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_rcvbulkpipe(usb_dev, 1), - entry->skb->data, entry->skb->len, - rt2x00usb_interrupt_rxdone, entry); + if (entry->queue->qid == QID_RX) { + pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint); + usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe, + entry->skb->data, entry->skb->len, + rt2x00usb_interrupt_rxdone, entry); - set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(entry_priv->urb, GFP_ATOMIC); + set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + usb_submit_urb(entry_priv->urb, GFP_ATOMIC); + } else { + entry->flags = 0; + } } -EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry); +EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry); -void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static void rt2x00usb_assign_endpoint(struct data_queue *queue, + struct usb_endpoint_descriptor *ep_desc) { - entry->flags = 0; + struct usb_device *usb_dev = to_usb_device_intf(queue->rt2x00dev->dev); + int pipe; + + queue->usb_endpoint = usb_endpoint_num(ep_desc); + + if (queue->qid == QID_RX) { + pipe = usb_rcvbulkpipe(usb_dev, queue->usb_endpoint); + queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 0); + } else { + pipe = usb_sndbulkpipe(usb_dev, queue->usb_endpoint); + queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 1); + } + + if (!queue->usb_maxpacket) + queue->usb_maxpacket = 1; +} + +static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev) +{ + struct usb_interface *intf = to_usb_interface(rt2x00dev->dev); + struct usb_host_interface *intf_desc = intf->cur_altsetting; + struct usb_endpoint_descriptor *ep_desc; + struct data_queue *queue = rt2x00dev->tx; + struct usb_endpoint_descriptor *tx_ep_desc = NULL; + unsigned int i; + + /* + * Walk through all available endpoints to search for "bulk in" + * and "bulk out" endpoints. When we find such endpoints collect + * the information we need from the descriptor and assign it + * to the queue. + */ + for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) { + ep_desc = &intf_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(ep_desc)) { + rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc); + } else if (usb_endpoint_is_bulk_out(ep_desc)) { + rt2x00usb_assign_endpoint(queue, ep_desc); + + if (queue != queue_end(rt2x00dev)) + queue = queue_next(queue); + tx_ep_desc = ep_desc; + } + } + + /* + * At least 1 endpoint for RX and 1 endpoint for TX must be available. + */ + if (!rt2x00dev->rx->usb_endpoint || !rt2x00dev->tx->usb_endpoint) { + ERROR(rt2x00dev, "Bulk-in/Bulk-out endpoints not found\n"); + return -EPIPE; + } + + /* + * It might be possible not all queues have a dedicated endpoint. + * Loop through all TX queues and copy the endpoint information + * which we have gathered from already assigned endpoints. + */ + txall_queue_for_each(rt2x00dev, queue) { + if (!queue->usb_endpoint) + rt2x00usb_assign_endpoint(queue, tx_ep_desc); + } + + return 0; } -EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry); static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) @@ -445,6 +535,13 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) int status; /* + * Find endpoints for each queue + */ + status = rt2x00usb_find_endpoints(rt2x00dev); + if (status) + goto exit; + + /* * Allocate DMA */ queue_for_each(rt2x00dev, queue) { @@ -534,12 +631,6 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00dev->dev = &usb_intf->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; - mutex_init(&rt2x00dev->usb_cache_mutex); - - rt2x00dev->usb_maxpacket = - usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1); - if (!rt2x00dev->usb_maxpacket) - rt2x00dev->usb_maxpacket = 1; retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 3b4a674..2bd4ac8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -231,6 +231,142 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, REGISTER_TIMEOUT16(length)); } +/** + * rt2x00usb_regbusy_read - Read 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Pointer to where register contents should be stored + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + __le32 reg; + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); + *value = le32_to_cpu(reg); +} + +/** + * rt2x00usb_register_read_lock - Read 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Pointer to where register contents should be stored + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_req_buff_lock(). + */ +static inline void rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + __le32 reg; + rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); + *value = le32_to_cpu(reg); +} + +/** + * rt2x00usb_register_multiread - Read 32bit register words + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Pointer to where register contents should be stored + * @length: Length of the data + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + value, length, + REGISTER_TIMEOUT32(length)); +} + +/** + * rt2x00usb_register_write - Write 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Data which should be written + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + __le32 reg = cpu_to_le32(value); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); +} + +/** + * rt2x00usb_register_write_lock - Write 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Data which should be written + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_req_buff_lock(). + */ +static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + __le32 reg = cpu_to_le32(value); + rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); +} + +/** + * rt2x00usb_register_multiwrite - Write 32bit register words + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Data which should be written + * @length: Length of the data + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + value, length, + REGISTER_TIMEOUT32(length)); +} + +/** + * rt2x00usb_regbusy_read - Read from register with busy check + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @field: Field to check if register is busy + * @reg: Pointer to where register contents should be stored + * + * This function will read the given register, and checks if the + * register is busy. If it is, it will sleep for a couple of + * microseconds before reading the register again. If the register + * is not read after a certain timeout, this function will return + * FALSE. + */ +int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field32 field, + u32 *reg); + /* * Radio handlers */ @@ -286,10 +422,7 @@ void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, /* * Device initialization handlers. */ -void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); -void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry); +void rt2x00usb_clear_entry(struct queue_entry *entry); int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index a461620..987e890 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -55,45 +55,36 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); * the access attempt is considered to have failed, * and we will print an error. */ -static u32 rt61pci_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PHY_CSR3, ®); - if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \ + H2M_MAILBOX_CSR_OWNER, (__reg)) static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u32 reg; - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); - return; - } + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the data into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_VALUE, value); + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); + + rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); + } - rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -101,66 +92,58 @@ static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev, { u32 reg; - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - return; - } + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the request into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); + rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; - return; + WAIT_FOR_BBP(rt2x00dev, ®); } *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PHY_CSR4, ®); - if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } + mutex_lock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); - return; + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); + rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); + rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); -rf_write: - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); + rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } - rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); + mutex_unlock(&rt2x00dev->csr_mutex); } #ifdef CONFIG_RT2X00_LIB_LEDS @@ -175,25 +158,27 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, ®); + mutex_lock(&rt2x00dev->csr_mutex); - if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) { - ERROR(rt2x00dev, "mcu request error. " - "Request 0x%02x failed for token 0x%02x.\n", - command, token); - return; + /* + * Wait until the MCU becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_MCU(rt2x00dev, ®)) { + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); + + rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); + rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); } - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); + mutex_unlock(&rt2x00dev->csr_mutex); - rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); - rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); } #endif /* CONFIG_RT2X00_LIB_LEDS */ @@ -228,43 +213,34 @@ static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom) } #ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt61pci_read_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt61pci_write_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - static const struct rt2x00debug rt61pci_rt2x00debug = { .owner = THIS_MODULE, .csr = { - .read = rt61pci_read_csr, - .write = rt61pci_write_csr, + .read = rt2x00pci_register_read, + .write = rt2x00pci_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, .word_size = sizeof(u32), .word_count = CSR_REG_SIZE / sizeof(u32), }, .eeprom = { .read = rt2x00_eeprom_read, .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, .word_size = sizeof(u16), .word_count = EEPROM_SIZE / sizeof(u16), }, .bbp = { .read = rt61pci_bbp_read, .write = rt61pci_bbp_write, + .word_base = BBP_BASE, .word_size = sizeof(u8), .word_count = BBP_SIZE / sizeof(u8), }, .rf = { .read = rt2x00_rf_read, .write = rt61pci_rf_write, + .word_base = RF_BASE, .word_size = sizeof(u32), .word_count = RF_SIZE / sizeof(u32), }, @@ -643,95 +619,18 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, !!erp->short_preamble); rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); -} - - -static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain = 0; - - if (libconf->band == IEEE80211_BAND_2GHZ) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - lna_gain += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - lna_gain += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask); -} - -static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r3; - u8 r94; - u8 smart; - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527)); - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); - rt61pci_bbp_write(rt2x00dev, 3, r3); - - r94 = 6; - if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) - r94 += txpower - MAX_TXPOWER; - else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) - r94 += txpower; - rt61pci_bbp_write(rt2x00dev, 94, r94); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - msleep(1); -} - -static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - struct rf_channel rf; - - rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); - rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); - rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); - rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); + rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); + rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); - rt61pci_config_channel(rt2x00dev, &rf, txpower); + rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); + rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); + rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); + rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); } static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, @@ -906,8 +805,8 @@ static const struct antenna_sel antenna_sel_bg[] = { { 98, { 0x48, 0x48 } }, }; -static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) +static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) { const struct antenna_sel *sel; unsigned int lna; @@ -954,20 +853,105 @@ static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, } } -static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, +static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain = 0; + + if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + +static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf, const int txpower) +{ + u8 r3; + u8 r94; + u8 smart; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527)); + + rt61pci_bbp_read(rt2x00dev, 3, &r3); + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); + rt61pci_bbp_write(rt2x00dev, 3, r3); + + r94 = 6; + if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) + r94 += txpower - MAX_TXPOWER; + else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) + r94 += txpower; + rt61pci_bbp_write(rt2x00dev, 94, r94); + + rt61pci_rf_write(rt2x00dev, 1, rf->rf1); + rt61pci_rf_write(rt2x00dev, 2, rf->rf2); + rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt61pci_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt61pci_rf_write(rt2x00dev, 1, rf->rf1); + rt61pci_rf_write(rt2x00dev, 2, rf->rf2); + rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt61pci_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt61pci_rf_write(rt2x00dev, 1, rf->rf1); + rt61pci_rf_write(rt2x00dev, 2, rf->rf2); + rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt61pci_rf_write(rt2x00dev, 4, rf->rf4); + + msleep(1); +} + +static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + struct rf_channel rf; + + rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); + rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); + rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); + rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); + + rt61pci_config_channel(rt2x00dev, &rf, txpower); +} + +static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { u32 reg; - rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, libconf->slot_time); - rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); + rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); +} - rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, libconf->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, libconf->eifs); - rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); +static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); @@ -990,16 +974,15 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev, /* Always recalculate LNA gain before changing configuration */ rt61pci_config_lna_gain(rt2x00dev, libconf); - if (flags & CONFIG_UPDATE_PHYMODE) - rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) rt61pci_config_channel(rt2x00dev, &libconf->rf, libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + if ((flags & IEEE80211_CONF_CHANGE_POWER) && + !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt61pci_config_antenna(rt2x00dev, &libconf->ant); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt61pci_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt61pci_config_duration(rt2x00dev, libconf); } @@ -1263,33 +1246,44 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, /* * Initialization functions. */ -static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static bool rt61pci_get_entry_state(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(entry_priv->desc, 5, &word); - rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 5, word); + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 0, &word); + + return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); + return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || + rt2x00_get_field32(word, TXD_W0_VALID)); + } } -static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev, - struct queue_entry *entry) +static void rt61pci_clear_entry(struct queue_entry *entry) { struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); + if (entry->queue->qid == QID_RX) { + rt2x00_desc_read(entry_priv->desc, 5, &word); + rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, + skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 5, word); + + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); + rt2x00_desc_write(entry_priv->desc, 0, word); + } else { + rt2x00_desc_read(entry_priv->desc, 0, &word); + rt2x00_set_field32(&word, TXD_W0_VALID, 0); + rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); + rt2x00_desc_write(entry_priv->desc, 0, word); + } } static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) @@ -1784,8 +1778,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 2, word); if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { - _rt2x00_desc_write(txd, 3, skbdesc->iv); - _rt2x00_desc_write(txd, 4, skbdesc->eiv); + _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); + _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); } rt2x00_desc_read(txd, 5, &word); @@ -1934,7 +1928,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) } static void rt61pci_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) + struct rxdone_entry_desc *rxdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct queue_entry_priv_pci *entry_priv = entry->priv_data; @@ -1955,9 +1949,12 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, } if (rxdesc->cipher != CIPHER_NONE) { - _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv); - _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv); + _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv[0]); + _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->iv[1]); + rxdesc->dev_flags |= RXDONE_CRYPTO_IV; + _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv); + rxdesc->dev_flags |= RXDONE_CRYPTO_ICV; /* * Hardware has stripped IV/EIV data from 802.11 frame during @@ -2175,10 +2172,8 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); } rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); @@ -2630,20 +2625,6 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); - rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); - - return 0; -} - static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, const struct ieee80211_tx_queue_params *params) { @@ -2726,7 +2707,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt61pci_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt61pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, @@ -2741,8 +2721,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .load_firmware = rt61pci_load_firmware, .initialize = rt2x00pci_initialize, .uninitialize = rt2x00pci_uninitialize, - .init_rxentry = rt61pci_init_rxentry, - .init_txentry = rt61pci_init_txentry, + .get_entry_state = rt61pci_get_entry_state, + .clear_entry = rt61pci_clear_entry, .set_device_state = rt61pci_set_device_state, .rfkill_poll = rt61pci_rfkill_poll, .link_stats = rt61pci_link_stats, @@ -2758,6 +2738,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .config_filter = rt61pci_config_filter, .config_intf = rt61pci_config_intf, .config_erp = rt61pci_config_erp, + .config_ant = rt61pci_config_ant, .config = rt61pci_config, }; diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 8ec1451..65fe333 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -48,7 +48,9 @@ #define CSR_REG_SIZE 0x04b0 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0100 +#define BBP_BASE 0x0000 #define BBP_SIZE 0x0080 +#define RF_BASE 0x0000 #define RF_SIZE 0x0014 /* diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 934f8e03..d638a8a 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -46,7 +46,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); /* * Register access. * All access to the CSR registers will go through the methods - * rt73usb_register_read and rt73usb_register_write. + * rt2x00usb_register_read and rt2x00usb_register_write. * BBP and RF register require indirect register access, * and use the CSR registers BBPCSR and RFCSR to achieve this. * These indirect registers work with busy bits, @@ -55,113 +55,35 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); * between each attampt. When the busy bit is still set at that time, * the access attempt is considered to have failed, * and we will print an error. - * The _lock versions must be used if you already hold the usb_cache_mutex + * The _lock versions must be used if you already hold the csr_mutex */ -static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value) -{ - __le32 reg; - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); - *value = le32_to_cpu(reg); -} - -static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value) -{ - __le32 reg; - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); - *value = le32_to_cpu(reg); -} - -static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - value, length, - REGISTER_TIMEOUT32(length)); -} - -static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); -} - -static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); -} - -static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - value, length, - REGISTER_TIMEOUT32(length)); -} - -static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read_lock(rt2x00dev, PHY_CSR3, ®); - if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { u32 reg; - mutex_lock(&rt2x00dev->usb_cache_mutex); + mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - - return; - -exit_fail: - mutex_unlock(&rt2x00dev->usb_cache_mutex); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_VALUE, value); + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); + + rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); + } - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -169,123 +91,95 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, { u32 reg; - mutex_lock(&rt2x00dev->usb_cache_mutex); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; + mutex_lock(&rt2x00dev->csr_mutex); /* - * Write the request into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); + rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - /* - * Wait until the BBP becomes ready. - */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; + WAIT_FOR_BBP(rt2x00dev, ®); + } *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - - return; - -exit_fail: - mutex_unlock(&rt2x00dev->usb_cache_mutex); - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; + mutex_unlock(&rt2x00dev->csr_mutex); } static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; - mutex_lock(&rt2x00dev->usb_cache_mutex); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read_lock(rt2x00dev, PHY_CSR4, ®); - if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - mutex_unlock(&rt2x00dev->usb_cache_mutex); - ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + mutex_lock(&rt2x00dev->csr_mutex); /* - * RF5225 and RF2527 contain 21 bits per RF register value, - * all others contain 20 bits. + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. */ - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, - 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527))); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - - rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); - mutex_unlock(&rt2x00dev->usb_cache_mutex); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt73usb_read_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data); -} + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + /* + * RF5225 and RF2527 contain 21 bits per RF register value, + * all others contain 20 bits. + */ + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, + 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527))); + rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); + rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); + + rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } -static void rt73usb_write_csr(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data); + mutex_unlock(&rt2x00dev->csr_mutex); } +#ifdef CONFIG_RT2X00_LIB_DEBUGFS static const struct rt2x00debug rt73usb_rt2x00debug = { .owner = THIS_MODULE, .csr = { - .read = rt73usb_read_csr, - .write = rt73usb_write_csr, + .read = rt2x00usb_register_read, + .write = rt2x00usb_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, .word_size = sizeof(u32), .word_count = CSR_REG_SIZE / sizeof(u32), }, .eeprom = { .read = rt2x00_eeprom_read, .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, .word_size = sizeof(u16), .word_count = EEPROM_SIZE / sizeof(u16), }, .bbp = { .read = rt73usb_bbp_read, .write = rt73usb_bbp_write, + .word_base = BBP_BASE, .word_size = sizeof(u8), .word_count = BBP_SIZE / sizeof(u8), }, .rf = { .read = rt2x00_rf_read, .write = rt73usb_rf_write, + .word_base = RF_BASE, .word_size = sizeof(u32), .word_count = RF_SIZE / sizeof(u32), }, @@ -341,10 +235,10 @@ static int rt73usb_blink_set(struct led_classdev *led_cdev, container_of(led_cdev, struct rt2x00_led, led_dev); u32 reg; - rt73usb_register_read(led->rt2x00dev, MAC_CSR14, ®); + rt2x00usb_register_read(led->rt2x00dev, MAC_CSR14, ®); rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); - rt73usb_register_write(led->rt2x00dev, MAC_CSR14, reg); + rt2x00usb_register_write(led->rt2x00dev, MAC_CSR14, reg); return 0; } @@ -387,7 +281,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, */ mask = (0xf << crypto->bssidx); - rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®); reg &= mask; if (reg && reg == mask) @@ -424,16 +318,16 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, field.bit_offset = (3 * key->hw_key_idx); field.bit_mask = 0x7 << field.bit_offset; - rt73usb_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR1, ®); rt2x00_set_field32(®, field, crypto->cipher); - rt73usb_register_write(rt2x00dev, SEC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR1, reg); } else { field.bit_offset = (3 * (key->hw_key_idx - 8)); field.bit_mask = 0x7 << field.bit_offset; - rt73usb_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR5, ®); rt2x00_set_field32(®, field, crypto->cipher); - rt73usb_register_write(rt2x00dev, SEC_CSR5, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR5, reg); } /* @@ -456,12 +350,12 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, */ mask = 1 << key->hw_key_idx; - rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®); if (crypto->cmd == SET_KEY) reg |= mask; else if (crypto->cmd == DISABLE_KEY) reg &= ~mask; - rt73usb_register_write(rt2x00dev, SEC_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR0, reg); return 0; } @@ -486,10 +380,10 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * When both registers are full, we drop the key, * otherwise we use the first invalid entry. */ - rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®); if (reg && reg == ~0) { key->hw_key_idx = 32; - rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®); if (reg && reg == ~0) return -ENOSPC; } @@ -517,14 +411,14 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, /* * Send the address and cipher type to the hardware register. * This data fits within the CSR cache size, so we can use - * rt73usb_register_multiwrite() directly. + * rt2x00usb_register_multiwrite() directly. */ memset(&addr_entry, 0, sizeof(addr_entry)); memcpy(&addr_entry, crypto->address, ETH_ALEN); addr_entry.cipher = crypto->cipher; reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); - rt73usb_register_multiwrite(rt2x00dev, reg, + rt2x00usb_register_multiwrite(rt2x00dev, reg, &addr_entry, sizeof(addr_entry)); /* @@ -532,9 +426,9 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * without this received frames will not be decrypted * by the hardware. */ - rt73usb_register_read(rt2x00dev, SEC_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR4, ®); reg |= (1 << crypto->bssidx); - rt73usb_register_write(rt2x00dev, SEC_CSR4, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR4, reg); /* * The driver does not support the IV/EIV generation @@ -557,21 +451,21 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, if (key->hw_key_idx < 32) { mask = 1 << key->hw_key_idx; - rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®); if (crypto->cmd == SET_KEY) reg |= mask; else if (crypto->cmd == DISABLE_KEY) reg &= ~mask; - rt73usb_register_write(rt2x00dev, SEC_CSR2, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR2, reg); } else { mask = 1 << (key->hw_key_idx - 32); - rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®); if (crypto->cmd == SET_KEY) reg |= mask; else if (crypto->cmd == DISABLE_KEY) reg &= ~mask; - rt73usb_register_write(rt2x00dev, SEC_CSR3, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR3, reg); } return 0; @@ -588,7 +482,7 @@ static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, * and broadcast frames will always be accepted since * there is no filter for it at this time. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, !(filter_flags & FIF_FCSFAIL)); rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, @@ -606,7 +500,7 @@ static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, !(filter_flags & FIF_CONTROL)); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); } static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, @@ -625,16 +519,16 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, * bits which (when set to 0) will invalidate the entire beacon. */ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt73usb_register_write(rt2x00dev, beacon_base, 0); + rt2x00usb_register_write(rt2x00dev, beacon_base, 0); /* * Enable synchronisation. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } if (flags & CONFIG_UPDATE_MAC) { @@ -642,7 +536,7 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); conf->mac[1] = cpu_to_le32(reg); - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, + rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac, sizeof(conf->mac)); } @@ -651,7 +545,7 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); conf->bssid[1] = cpu_to_le32(reg); - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, + rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR4, conf->bssid, sizeof(conf->bssid)); } } @@ -661,95 +555,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, !!erp->short_preamble); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); -} - -static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain = 0; - - if (libconf->band == IEEE80211_BAND_2GHZ) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - lna_gain += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt73usb_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask); -} - -static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r3; - u8 r94; - u8 smart; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527)); - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); - rt73usb_bbp_write(rt2x00dev, 3, r3); - - r94 = 6; - if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) - r94 += txpower - MAX_TXPOWER; - else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) - r94 += txpower; - rt73usb_bbp_write(rt2x00dev, 94, r94); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); + rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); - udelay(10); -} - -static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - struct rf_channel rf; - - rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); - rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); - rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); - rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); - - rt73usb_config_channel(rt2x00dev, &rf, txpower); + rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); + rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); + rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); + rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg); } static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, @@ -869,8 +694,8 @@ static const struct antenna_sel antenna_sel_bg[] = { { 98, { 0x48, 0x48 } }, }; -static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) +static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev, + struct antenna_setup *ant) { const struct antenna_sel *sel; unsigned int lna; @@ -895,14 +720,14 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); - rt73usb_register_read(rt2x00dev, PHY_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)); - rt73usb_register_write(rt2x00dev, PHY_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg); if (rt2x00_rf(&rt2x00dev->chip, RF5226) || rt2x00_rf(&rt2x00dev->chip, RF5225)) @@ -912,33 +737,111 @@ static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, rt73usb_config_antenna_2x(rt2x00dev, ant); } -static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, +static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { + u16 eeprom; + short lna_gain = 0; + + if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) + lna_gain += 14; + + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); + lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); + } + + rt2x00dev->lna_gain = lna_gain; +} + +static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev, + struct rf_channel *rf, const int txpower) +{ + u8 r3; + u8 r94; + u8 smart; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527)); + + rt73usb_bbp_read(rt2x00dev, 3, &r3); + rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); + rt73usb_bbp_write(rt2x00dev, 3, r3); + + r94 = 6; + if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) + r94 += txpower - MAX_TXPOWER; + else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) + r94 += txpower; + rt73usb_bbp_write(rt2x00dev, 94, r94); + + rt73usb_rf_write(rt2x00dev, 1, rf->rf1); + rt73usb_rf_write(rt2x00dev, 2, rf->rf2); + rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + + rt73usb_rf_write(rt2x00dev, 1, rf->rf1); + rt73usb_rf_write(rt2x00dev, 2, rf->rf2); + rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + + rt73usb_rf_write(rt2x00dev, 1, rf->rf1); + rt73usb_rf_write(rt2x00dev, 2, rf->rf2); + rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt73usb_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(10); +} + +static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + struct rf_channel rf; + + rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); + rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); + rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); + rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); + + rt73usb_config_channel(rt2x00dev, &rf, txpower); +} + +static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ u32 reg; - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, libconf->slot_time); - rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); +} - rt73usb_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, libconf->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, libconf->eifs); - rt73usb_register_write(rt2x00dev, MAC_CSR8, reg); +static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, libconf->conf->beacon_int * 16); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } static void rt73usb_config(struct rt2x00_dev *rt2x00dev, @@ -948,16 +851,15 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev, /* Always recalculate LNA gain before changing configuration */ rt73usb_config_lna_gain(rt2x00dev, libconf); - if (flags & CONFIG_UPDATE_PHYMODE) - rt73usb_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) rt73usb_config_channel(rt2x00dev, &libconf->rf, libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) + if ((flags & IEEE80211_CONF_CHANGE_POWER) && + !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt73usb_config_antenna(rt2x00dev, &libconf->ant); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt73usb_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) rt73usb_config_duration(rt2x00dev, libconf); } @@ -972,13 +874,13 @@ static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev, /* * Update FCS error count from register. */ - rt73usb_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®); qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); /* * Update False CCA count from register. */ - rt73usb_register_read(rt2x00dev, STA_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®); qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); } @@ -1138,7 +1040,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, * Wait for stable hardware. */ for (i = 0; i < 100; i++) { - rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); if (reg) break; msleep(1); @@ -1180,13 +1082,13 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR1, ®); rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ @@ -1195,12 +1097,12 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR1, reg); /* * CCK TXD BBP registers */ - rt73usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR2, ®); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); @@ -1209,77 +1111,77 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR2, reg); /* * OFDM TXD BBP registers */ - rt73usb_register_read(rt2x00dev, TXRX_CSR3, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR3, ®); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR3, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR7, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR7, ®); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); - rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR7, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR8, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR8, ®); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); - rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR8, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); - rt73usb_register_read(rt2x00dev, MAC_CSR6, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR6, ®); rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff); - rt73usb_register_write(rt2x00dev, MAC_CSR6, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR6, reg); - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); + rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) return -EBUSY; - rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); + rt2x00usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); /* * Invalidate all Shared Keys (SEC_CSR0), * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) */ - rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); - rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); - rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); + rt2x00usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); + rt2x00usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); + rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); reg = 0x000023b0; if (rt2x00_rf(&rt2x00dev->chip, RF5225) || rt2x00_rf(&rt2x00dev->chip, RF2527)) rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1); - rt73usb_register_write(rt2x00dev, PHY_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg); - rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); - rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); - rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); + rt2x00usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); + rt2x00usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); + rt2x00usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); - rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); /* * Clear all beacons @@ -1287,36 +1189,36 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) * the first byte since that byte contains the VALID and OWNER * bits which (when set to 0) will invalidate the entire beacon. */ - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. */ - rt73usb_register_read(rt2x00dev, STA_CSR0, ®); - rt73usb_register_read(rt2x00dev, STA_CSR1, ®); - rt73usb_register_read(rt2x00dev, STA_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR2, ®); /* * Reset MAC and BBP registers. */ - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); return 0; } @@ -1394,11 +1296,11 @@ static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, (state == STATE_RADIO_RX_OFF) || (state == STATE_RADIO_RX_OFF_LINK)); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); } static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) @@ -1415,12 +1317,12 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); + rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); /* * Disable synchronisation. */ - rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, 0); rt2x00usb_disable_radio(rt2x00dev); } @@ -1433,10 +1335,10 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) put_to_sleep = (state != STATE_AWAKE); - rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®); rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); - rt73usb_register_write(rt2x00dev, MAC_CSR12, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg); /* * Device is not guaranteed to be in the requested state yet. @@ -1444,7 +1346,7 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) * device has entered the correct state. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®); state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); if (state == !put_to_sleep) return 0; @@ -1526,8 +1428,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 2, word); if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) { - _rt2x00_desc_write(txd, 3, skbdesc->iv); - _rt2x00_desc_write(txd, 4, skbdesc->eiv); + _rt2x00_desc_write(txd, 3, skbdesc->iv[0]); + _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); } rt2x00_desc_read(txd, 5, &word); @@ -1584,11 +1486,11 @@ static void rt73usb_write_beacon(struct queue_entry *entry) * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); /* * Write entire beacon with descriptor to register. @@ -1606,8 +1508,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry) entry->skb = NULL; } -static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) +static int rt73usb_get_tx_data_len(struct queue_entry *entry) { int length; @@ -1615,8 +1516,8 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * The length _must_ be a multiple of 4, * but it must _not_ be a multiple of the USB packet size. */ - length = roundup(skb->len, 4); - length += (4 * !(length % rt2x00dev->usb_maxpacket)); + length = roundup(entry->skb->len, 4); + length += (4 * !(length % entry->queue->usb_maxpacket)); return length; } @@ -1635,14 +1536,14 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, * For Wi-Fi faily generated beacons between participating stations. * Set TBTT phase adaptive adjustment step to 8us (default 16us) */ - rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } } @@ -1685,7 +1586,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) } static void rt73usb_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) + struct rxdone_entry_desc *rxdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); @@ -1717,9 +1618,12 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, } if (rxdesc->cipher != CIPHER_NONE) { - _rt2x00_desc_read(rxd, 2, &rxdesc->iv); - _rt2x00_desc_read(rxd, 3, &rxdesc->eiv); + _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]); + _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]); + rxdesc->dev_flags |= RXDONE_CRYPTO_IV; + _rt2x00_desc_read(rxd, 4, &rxdesc->icv); + rxdesc->dev_flags |= RXDONE_CRYPTO_ICV; /* * Hardware has stripped IV/EIV data from 802.11 frame during @@ -1781,10 +1685,8 @@ static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); + EEPROM(rt2x00dev, "MAC: %pM\n", mac); } rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); @@ -1883,7 +1785,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Identify RF chipset. */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2571, value, reg); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) { @@ -2211,20 +2113,6 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) /* * IEEE80211 stack callback functions. */ -static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); - rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); - - return 0; -} - static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, const struct ieee80211_tx_queue_params *params) { @@ -2251,33 +2139,33 @@ static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, field.bit_offset = queue_idx * 16; field.bit_mask = 0xffff << field.bit_offset; - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); rt2x00_set_field32(®, field, queue->txop); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); } else if (queue_idx < 4) { field.bit_offset = (queue_idx - 2) * 16; field.bit_mask = 0xffff << field.bit_offset; - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); rt2x00_set_field32(®, field, queue->txop); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); } /* Update WMM registers */ field.bit_offset = queue_idx * 4; field.bit_mask = 0xf << field.bit_offset; - rt73usb_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00usb_register_read(rt2x00dev, AIFSN_CSR, ®); rt2x00_set_field32(®, field, queue->aifs); - rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg); + rt2x00usb_register_write(rt2x00dev, AIFSN_CSR, reg); - rt73usb_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00usb_register_read(rt2x00dev, CWMIN_CSR, ®); rt2x00_set_field32(®, field, queue->cw_min); - rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg); + rt2x00usb_register_write(rt2x00dev, CWMIN_CSR, reg); - rt73usb_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00usb_register_read(rt2x00dev, CWMAX_CSR, ®); rt2x00_set_field32(®, field, queue->cw_max); - rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg); + rt2x00usb_register_write(rt2x00dev, CWMAX_CSR, reg); return 0; } @@ -2295,9 +2183,9 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) u64 tsf; u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR13, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR13, ®); tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt73usb_register_read(rt2x00dev, TXRX_CSR12, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR12, ®); tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); return tsf; @@ -2317,7 +2205,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt73usb_set_retry_limit, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt73usb_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, @@ -2331,8 +2218,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .load_firmware = rt73usb_load_firmware, .initialize = rt2x00usb_initialize, .uninitialize = rt2x00usb_uninitialize, - .init_rxentry = rt2x00usb_init_rxentry, - .init_txentry = rt2x00usb_init_txentry, + .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt73usb_set_device_state, .link_stats = rt73usb_link_stats, .reset_tuner = rt73usb_reset_tuner, @@ -2348,6 +2234,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .config_filter = rt73usb_config_filter, .config_intf = rt73usb_config_intf, .config_erp = rt73usb_config_erp, + .config_ant = rt73usb_config_ant, .config = rt73usb_config, }; diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 868386c..46e1405 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -48,7 +48,9 @@ #define CSR_REG_SIZE 0x04b0 #define EEPROM_BASE 0x0000 #define EEPROM_SIZE 0x0100 +#define BBP_BASE 0x0000 #define BBP_SIZE 0x0080 +#define RF_BASE 0x0000 #define RF_SIZE 0x0014 /* |
