diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00dev.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 435 |
1 files changed, 361 insertions, 74 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index ff399f8..c4be2ac4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -23,16 +23,12 @@ Abstract: rt2x00 generic device routines. */ -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - #include <linux/kernel.h> #include <linux/module.h> #include "rt2x00.h" #include "rt2x00lib.h" +#include "rt2x00dump.h" /* * Ring handler. @@ -67,7 +63,21 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); */ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) { - rt2x00_clear_link(&rt2x00dev->link); + rt2x00dev->link.count = 0; + rt2x00dev->link.vgc_level = 0; + + memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual)); + + /* + * The RX and TX percentage should start at 50% + * this will assure we will get at least get some + * decent value when the link tuner starts. + * The value will be dropped and overwritten with + * the correct (measured )value anyway during the + * first run of the link tuner. + */ + rt2x00dev->link.qual.rx_percentage = 50; + rt2x00dev->link.qual.tx_percentage = 50; /* * Reset the link tuner. @@ -93,6 +103,46 @@ void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) } /* + * Ring initialization + */ +static void rt2x00lib_init_rxrings(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring = rt2x00dev->rx; + unsigned int i; + + if (!rt2x00dev->ops->lib->init_rxentry) + return; + + if (ring->data_addr) + memset(ring->data_addr, 0, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, &ring->entry[i]); + + rt2x00_ring_index_clear(ring); +} + +static void rt2x00lib_init_txrings(struct rt2x00_dev *rt2x00dev) +{ + struct data_ring *ring; + unsigned int i; + + if (!rt2x00dev->ops->lib->init_txentry) + return; + + txringall_for_each(rt2x00dev, ring) { + if (ring->data_addr) + memset(ring->data_addr, 0, rt2x00_get_ring_size(ring)); + + for (i = 0; i < ring->stats.limit; i++) + rt2x00dev->ops->lib->init_txentry(rt2x00dev, + &ring->entry[i]); + + rt2x00_ring_index_clear(ring); + } +} + +/* * Radio control handlers. */ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) @@ -108,6 +158,12 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) return 0; /* + * Initialize all data rings. + */ + rt2x00lib_init_rxrings(rt2x00dev); + rt2x00lib_init_txrings(rt2x00dev); + + /* * Enable radio. */ status = rt2x00dev->ops->lib->set_device_state(rt2x00dev, @@ -179,26 +235,153 @@ void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) rt2x00lib_start_link_tuner(rt2x00dev); } -static void rt2x00lib_precalculate_link_signal(struct link *link) +static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) { - if (link->rx_failed || link->rx_success) - link->rx_percentage = - (link->rx_success * 100) / - (link->rx_failed + link->rx_success); + enum antenna rx = rt2x00dev->link.ant.active.rx; + enum antenna tx = rt2x00dev->link.ant.active.tx; + int sample_a = + rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_A); + int sample_b = + rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_B); + + /* + * We are done sampling. Now we should evaluate the results. + */ + rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE; + + /* + * During the last period we have sampled the RSSI + * from both antenna's. It now is time to determine + * which antenna demonstrated the best performance. + * When we are already on the antenna with the best + * performance, then there really is nothing for us + * left to do. + */ + if (sample_a == sample_b) + return; + + if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) { + if (sample_a > sample_b && rx == ANTENNA_B) + rx = ANTENNA_A; + else if (rx == ANTENNA_A) + rx = ANTENNA_B; + } + + if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) { + if (sample_a > sample_b && tx == ANTENNA_B) + tx = ANTENNA_A; + else if (tx == ANTENNA_A) + tx = ANTENNA_B; + } + + rt2x00lib_config_antenna(rt2x00dev, rx, tx); +} + +static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) +{ + enum antenna rx = rt2x00dev->link.ant.active.rx; + enum antenna tx = rt2x00dev->link.ant.active.tx; + int rssi_curr = rt2x00_get_link_ant_rssi(&rt2x00dev->link); + int rssi_old = rt2x00_update_ant_rssi(&rt2x00dev->link, rssi_curr); + + /* + * Legacy driver indicates that we should swap antenna's + * when the difference in RSSI is greater that 5. This + * also should be done when the RSSI was actually better + * then the previous sample. + * When the difference exceeds the threshold we should + * sample the rssi from the other antenna to make a valid + * comparison between the 2 antennas. + */ + if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) + return; + + rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; + + if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) + rx = (rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + + if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) + tx = (tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; + + rt2x00lib_config_antenna(rt2x00dev, rx, tx); +} + +static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) +{ + /* + * Determine if software diversity is enabled for + * either the TX or RX antenna (or both). + * Always perform this check since within the link + * tuner interval the configuration might have changed. + */ + rt2x00dev->link.ant.flags &= ~ANTENNA_RX_DIVERSITY; + rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY; + + if (rt2x00dev->hw->conf.antenna_sel_rx == 0 && + rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY) + rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY; + if (rt2x00dev->hw->conf.antenna_sel_tx == 0 && + rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY) + rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY; + + if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && + !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) { + rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE; + return; + } + + /* + * If we have only sampled the data over the last period + * we should now harvest the data. Otherwise just evaluate + * the data. The latter should only be performed once + * every 2 seconds. + */ + if (rt2x00dev->link.ant.flags & ANTENNA_MODE_SAMPLE) + rt2x00lib_evaluate_antenna_sample(rt2x00dev); + else if (rt2x00dev->link.count & 1) + rt2x00lib_evaluate_antenna_eval(rt2x00dev); +} + +static void rt2x00lib_update_link_stats(struct link *link, int rssi) +{ + int avg_rssi = rssi; + + /* + * Update global RSSI + */ + if (link->qual.avg_rssi) + avg_rssi = MOVING_AVERAGE(link->qual.avg_rssi, rssi, 8); + link->qual.avg_rssi = avg_rssi; + + /* + * Update antenna RSSI + */ + if (link->ant.rssi_ant) + rssi = MOVING_AVERAGE(link->ant.rssi_ant, rssi, 8); + link->ant.rssi_ant = rssi; +} + +static void rt2x00lib_precalculate_link_signal(struct link_qual *qual) +{ + if (qual->rx_failed || qual->rx_success) + qual->rx_percentage = + (qual->rx_success * 100) / + (qual->rx_failed + qual->rx_success); else - link->rx_percentage = 50; + qual->rx_percentage = 50; - if (link->tx_failed || link->tx_success) - link->tx_percentage = - (link->tx_success * 100) / - (link->tx_failed + link->tx_success); + if (qual->tx_failed || qual->tx_success) + qual->tx_percentage = + (qual->tx_success * 100) / + (qual->tx_failed + qual->tx_success); else - link->tx_percentage = 50; + qual->tx_percentage = 50; - link->rx_success = 0; - link->rx_failed = 0; - link->tx_success = 0; - link->tx_failed = 0; + qual->rx_success = 0; + qual->rx_failed = 0; + qual->tx_success = 0; + qual->tx_failed = 0; } static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev, @@ -225,8 +408,8 @@ static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev, * defines to calculate the current link signal. */ signal = ((WEIGHT_RSSI * rssi_percentage) + - (WEIGHT_TX * rt2x00dev->link.tx_percentage) + - (WEIGHT_RX * rt2x00dev->link.rx_percentage)) / 100; + (WEIGHT_TX * rt2x00dev->link.qual.tx_percentage) + + (WEIGHT_RX * rt2x00dev->link.qual.rx_percentage)) / 100; return (signal > 100) ? 100 : signal; } @@ -246,10 +429,9 @@ static void rt2x00lib_link_tuner(struct work_struct *work) /* * Update statistics. */ - rt2x00dev->ops->lib->link_stats(rt2x00dev); - + rt2x00dev->ops->lib->link_stats(rt2x00dev, &rt2x00dev->link.qual); rt2x00dev->low_level_stats.dot11FCSErrorCount += - rt2x00dev->link.rx_failed; + rt2x00dev->link.qual.rx_failed; /* * Only perform the link tuning when Link tuning @@ -259,10 +441,15 @@ static void rt2x00lib_link_tuner(struct work_struct *work) rt2x00dev->ops->lib->link_tuner(rt2x00dev); /* + * Evaluate antenna setup. + */ + rt2x00lib_evaluate_antenna(rt2x00dev); + + /* * Precalculate a portion of the link signal which is * in based on the tx/rx success/failure counters. */ - rt2x00lib_precalculate_link_signal(&rt2x00dev->link); + rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual); /* * Increase tuner counter, and reschedule the next link tuner run. @@ -276,7 +463,7 @@ static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) { struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, filter_work); - unsigned int filter = rt2x00dev->interface.filter; + unsigned int filter = rt2x00dev->packet_filter; /* * Since we had stored the filter inside interface.filter, @@ -284,7 +471,7 @@ static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) * assume nothing has changed (*total_flags will be compared * to interface.filter to determine if any action is required). */ - rt2x00dev->interface.filter = 0; + rt2x00dev->packet_filter = 0; rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw, filter, &filter, 0, NULL); @@ -294,10 +481,17 @@ static void rt2x00lib_configuration_scheduled(struct work_struct *work) { struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, config_work); - int preamble = !test_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); + struct ieee80211_bss_conf bss_conf; - rt2x00mac_erp_ie_changed(rt2x00dev->hw, - IEEE80211_ERP_CHANGE_PREAMBLE, 0, preamble); + bss_conf.use_short_preamble = + test_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); + + /* + * FIXME: shouldn't invoke it this way because all other contents + * of bss_conf is invalid. + */ + rt2x00mac_bss_info_changed(rt2x00dev->hw, rt2x00dev->interface.id, + &bss_conf, BSS_CHANGED_ERP_PREAMBLE); } /* @@ -350,8 +544,8 @@ void rt2x00lib_txdone(struct data_entry *entry, tx_status->ack_signal = 0; tx_status->excessive_retries = (status == TX_FAIL_RETRY); tx_status->retry_count = retry; - rt2x00dev->link.tx_success += success; - rt2x00dev->link.tx_failed += retry + fail; + rt2x00dev->link.qual.tx_success += success; + rt2x00dev->link.qual.tx_failed += retry + fail; if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) { if (success) @@ -371,9 +565,11 @@ void rt2x00lib_txdone(struct data_entry *entry, } /* - * Send the tx_status to mac80211, - * that method also cleans up the skb structure. + * Send the tx_status to mac80211 & debugfs. + * mac80211 will clean up the skb structure. */ + get_skb_desc(entry->skb)->frame_type = DUMP_FRAME_TXDONE; + rt2x00debug_dump_frame(rt2x00dev, entry->skb); ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status); entry->skb = NULL; } @@ -386,8 +582,10 @@ void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; struct ieee80211_hw_mode *mode; struct ieee80211_rate *rate; + struct ieee80211_hdr *hdr; unsigned int i; int val = 0; + u16 fc; /* * Update RX statistics. @@ -412,17 +610,28 @@ void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, } } - rt2x00_update_link_rssi(&rt2x00dev->link, desc->rssi); - rt2x00dev->link.rx_success++; + /* + * Only update link status if this is a beacon frame carrying our bssid. + */ + hdr = (struct ieee80211_hdr*)skb->data; + fc = le16_to_cpu(hdr->frame_control); + if (is_beacon(fc) && desc->my_bss) + rt2x00lib_update_link_stats(&rt2x00dev->link, desc->rssi); + + rt2x00dev->link.qual.rx_success++; + rx_status->rate = val; rx_status->signal = rt2x00lib_calculate_link_signal(rt2x00dev, desc->rssi); rx_status->ssi = desc->rssi; rx_status->flag = desc->flags; + rx_status->antenna = rt2x00dev->link.ant.active.rx; /* - * Send frame to mac80211 + * Send frame to mac80211 & debugfs */ + get_skb_desc(skb)->frame_type = DUMP_FRAME_RXDONE; + rt2x00debug_dump_frame(rt2x00dev, skb); ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status); } EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); @@ -431,36 +640,25 @@ EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); * TX descriptor initializer */ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, + struct sk_buff *skb, struct ieee80211_tx_control *control) { struct txdata_entry_desc desc; - struct data_ring *ring; + struct skb_desc *skbdesc = get_skb_desc(skb); + struct ieee80211_hdr *ieee80211hdr = skbdesc->data; int tx_rate; int bitrate; + int length; int duration; int residual; u16 frame_control; u16 seq_ctrl; - /* - * Make sure the descriptor is properly cleared. - */ - memset(&desc, 0x00, sizeof(desc)); + memset(&desc, 0, sizeof(desc)); - /* - * Get ring pointer, if we fail to obtain the - * correct ring, then use the first TX ring. - */ - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - if (!ring) - ring = rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - - desc.cw_min = ring->tx_params.cw_min; - desc.cw_max = ring->tx_params.cw_max; - desc.aifs = ring->tx_params.aifs; + desc.cw_min = skbdesc->ring->tx_params.cw_min; + desc.cw_max = skbdesc->ring->tx_params.cw_max; + desc.aifs = skbdesc->ring->tx_params.aifs; /* * Identify queue @@ -482,12 +680,21 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, tx_rate = control->tx_rate; /* + * Check whether this frame is to be acked + */ + if (!(control->flags & IEEE80211_TXCTL_NO_ACK)) + __set_bit(ENTRY_TXD_ACK, &desc.flags); + + /* * Check if this is a RTS/CTS frame */ if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { __set_bit(ENTRY_TXD_BURST, &desc.flags); - if (is_rts_frame(frame_control)) + if (is_rts_frame(frame_control)) { __set_bit(ENTRY_TXD_RTS_FRAME, &desc.flags); + __set_bit(ENTRY_TXD_ACK, &desc.flags); + } else + __clear_bit(ENTRY_TXD_ACK, &desc.flags); if (control->rts_cts_rate) tx_rate = control->rts_cts_rate; } @@ -532,17 +739,18 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP); desc.service = 0x04; + length = skbdesc->data_len + FCS_LEN; if (test_bit(ENTRY_TXD_OFDM_RATE, &desc.flags)) { - desc.length_high = ((length + FCS_LEN) >> 6) & 0x3f; - desc.length_low = ((length + FCS_LEN) & 0x3f); + desc.length_high = (length >> 6) & 0x3f; + desc.length_low = length & 0x3f; } else { bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE); /* * Convert length to microseconds. */ - residual = get_duration_res(length + FCS_LEN, bitrate); - duration = get_duration(length + FCS_LEN, bitrate); + residual = get_duration_res(length, bitrate); + duration = get_duration(length, bitrate); if (residual != 0) { duration++; @@ -565,8 +773,22 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, desc.signal |= 0x08; } - rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, txd, &desc, - ieee80211hdr, length, control); + rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, skb, &desc, control); + + /* + * Update ring entry. + */ + skbdesc->entry->skb = skb; + memcpy(&skbdesc->entry->tx_status.control, control, sizeof(*control)); + + /* + * The frame has been completely initialized and ready + * for sending to the device. The caller will push the + * frame to the device, but we are going to push the + * frame to debugfs here. + */ + skbdesc->frame_type = DUMP_FRAME_TX; + rt2x00debug_dump_frame(rt2x00dev, skb); } EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc); @@ -809,6 +1031,7 @@ static int rt2x00lib_alloc_entries(struct data_ring *ring, entry[i].flags = 0; entry[i].ring = ring; entry[i].skb = NULL; + entry[i].entry_idx = i; } ring->entry = entry; @@ -866,7 +1089,7 @@ static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev) } } -void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) +static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) { if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) return; @@ -887,7 +1110,7 @@ void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) rt2x00lib_free_ring_entries(rt2x00dev); } -int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) +static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) { int status; @@ -930,12 +1153,65 @@ exit: return status; } +int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) +{ + int retval; + + if (test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + return 0; + + /* + * If this is the first interface which is added, + * we should load the firmware now. + */ + if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) { + retval = rt2x00lib_load_firmware(rt2x00dev); + if (retval) + return retval; + } + + /* + * Initialize the device. + */ + retval = rt2x00lib_initialize(rt2x00dev); + if (retval) + return retval; + + /* + * Enable radio. + */ + retval = rt2x00lib_enable_radio(rt2x00dev); + if (retval) { + rt2x00lib_uninitialize(rt2x00dev); + return retval; + } + + __set_bit(DEVICE_STARTED, &rt2x00dev->flags); + + return 0; +} + +void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) + return; + + /* + * Perhaps we can add something smarter here, + * but for now just disabling the radio should do. + */ + rt2x00lib_disable_radio(rt2x00dev); + + __clear_bit(DEVICE_STARTED, &rt2x00dev->flags); +} + /* * driver allocation handlers. */ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) { struct data_ring *ring; + unsigned int index; /* * We need the following rings: @@ -963,11 +1239,18 @@ static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) /* * Initialize ring parameters. - * cw_min: 2^5 = 32. - * cw_max: 2^10 = 1024. + * RX: queue_idx = 0 + * TX: queue_idx = IEEE80211_TX_QUEUE_DATA0 + index + * TX: cw_min: 2^5 = 32. + * TX: cw_max: 2^10 = 1024. */ - ring_for_each(rt2x00dev, ring) { + rt2x00dev->rx->rt2x00dev = rt2x00dev; + rt2x00dev->rx->queue_idx = 0; + + index = IEEE80211_TX_QUEUE_DATA0; + txring_for_each(rt2x00dev, ring) { ring->rt2x00dev = rt2x00dev; + ring->queue_idx = index++; ring->tx_params.aifs = 2; ring->tx_params.cw_min = 5; ring->tx_params.cw_max = 10; @@ -1008,7 +1291,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Reset current working type. */ - rt2x00dev->interface.type = INVALID_INTERFACE; + rt2x00dev->interface.type = IEEE80211_IF_TYPE_INVALID; /* * Allocate ring array. @@ -1112,7 +1395,7 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) * Disable radio and unitialize all items * that must be recreated on resume. */ - rt2x00mac_stop(rt2x00dev->hw); + rt2x00lib_stop(rt2x00dev); rt2x00lib_uninitialize(rt2x00dev); rt2x00debug_deregister(rt2x00dev); @@ -1134,7 +1417,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) int retval; NOTICE(rt2x00dev, "Waking up.\n"); - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); /* * Open the debugfs entry. @@ -1150,7 +1432,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reinitialize device and all active interfaces. */ - retval = rt2x00mac_start(rt2x00dev->hw); + retval = rt2x00lib_start(rt2x00dev); if (retval) goto exit; @@ -1166,6 +1448,11 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) rt2x00lib_config_type(rt2x00dev, intf->type); /* + * We are ready again to receive requests from mac80211. + */ + __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); + + /* * It is possible that during that mac80211 has attempted * to send frames while we were suspending or resuming. * In that case we have disabled the TX queue and should |
