diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800.h | 139 |
1 files changed, 116 insertions, 23 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 4c55e85..70b9abb 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -51,6 +51,7 @@ * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) * RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) + * RF5390 2.4G 1T1R */ #define RF2820 0x0001 #define RF2850 0x0002 @@ -65,6 +66,7 @@ #define RF3320 0x000b #define RF3322 0x000c #define RF3853 0x000d +#define RF5390 0x5390 /* * Chipset revisions. @@ -77,6 +79,7 @@ #define REV_RT3071E 0x0211 #define REV_RT3090E 0x0211 #define REV_RT3390E 0x0211 +#define REV_RT5390F 0x0502 /* * Signal information. @@ -121,6 +124,13 @@ #define E2PROM_CSR_RELOAD FIELD32(0x00000080) /* + * AUX_CTRL: Aux/PCI-E related configuration + */ +#define AUX_CTRL 0x10c +#define AUX_CTRL_WAKE_PCIE_EN FIELD32(0x00000002) +#define AUX_CTRL_FORCE_PCIE_CLK FIELD32(0x00000400) + +/* * OPT_14: Unknown register used by rt3xxx devices. */ #define OPT_14_CSR 0x0114 @@ -270,6 +280,7 @@ /* * GPIO_CTRL_CFG: + * GPIOD: GPIO direction, 0: Output, 1: Input */ #define GPIO_CTRL_CFG 0x0228 #define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) @@ -280,7 +291,14 @@ #define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) #define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) #define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) -#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) +#define GPIO_CTRL_CFG_GPIOD_BIT0 FIELD32(0x00000100) +#define GPIO_CTRL_CFG_GPIOD_BIT1 FIELD32(0x00000200) +#define GPIO_CTRL_CFG_GPIOD_BIT2 FIELD32(0x00000400) +#define GPIO_CTRL_CFG_GPIOD_BIT3 FIELD32(0x00000800) +#define GPIO_CTRL_CFG_GPIOD_BIT4 FIELD32(0x00001000) +#define GPIO_CTRL_CFG_GPIOD_BIT5 FIELD32(0x00002000) +#define GPIO_CTRL_CFG_GPIOD_BIT6 FIELD32(0x00004000) +#define GPIO_CTRL_CFG_GPIOD_BIT7 FIELD32(0x00008000) /* * MCU_CMD_CFG @@ -372,8 +390,12 @@ /* * US_CYC_CNT + * BT_MODE_EN: Bluetooth mode enable + * CLOCK CYCLE: Clock cycle count in 1us. + * PCI:0x21, PCIE:0x7d, USB:0x1e */ #define US_CYC_CNT 0x02a4 +#define US_CYC_CNT_BT_MODE_EN FIELD32(0x00000100) #define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff) /* @@ -442,7 +464,7 @@ */ #define RF_CSR_CFG 0x0500 #define RF_CSR_CFG_DATA FIELD32(0x000000ff) -#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) +#define RF_CSR_CFG_REGNUM FIELD32(0x00003f00) #define RF_CSR_CFG_WRITE FIELD32(0x00010000) #define RF_CSR_CFG_BUSY FIELD32(0x00020000) @@ -1132,8 +1154,8 @@ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) * PROTECT_CTRL: Protection control frame type for CCK TX * 0:none, 1:RTS/CTS, 2:CTS-to-self - * PROTECT_NAV: TXOP protection type for CCK TX - * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect + * PROTECT_NAV_SHORT: TXOP protection type for CCK TX with short NAV + * PROTECT_NAV_LONG: TXOP protection type for CCK TX with long NAV * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow @@ -1145,7 +1167,8 @@ #define CCK_PROT_CFG 0x1364 #define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define CCK_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) +#define CCK_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) @@ -1160,7 +1183,8 @@ #define OFDM_PROT_CFG 0x1368 #define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define OFDM_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) +#define OFDM_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) @@ -1175,7 +1199,8 @@ #define MM20_PROT_CFG 0x136c #define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) +#define MM20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) @@ -1190,7 +1215,8 @@ #define MM40_PROT_CFG 0x1370 #define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) +#define MM40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) @@ -1205,7 +1231,8 @@ #define GF20_PROT_CFG 0x1374 #define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) +#define GF20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) @@ -1220,7 +1247,8 @@ #define GF40_PROT_CFG 0x1378 #define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) #define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) +#define GF40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) #define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) #define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) #define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) @@ -1697,11 +1725,14 @@ struct mac_iveiv_entry { */ /* - * BBP 1: TX Antenna & Power - * POWER: 0 - normal, 1 - drop tx power by 6dBm, 2 - drop tx power by 12dBm, - * 3 - increase tx power by 6dBm + * BBP 1: TX Antenna & Power Control + * POWER_CTRL: + * 0 - normal, + * 1 - drop tx power by 6dBm, + * 2 - drop tx power by 12dBm, + * 3 - increase tx power by 6dBm */ -#define BBP1_TX_POWER FIELD8(0x07) +#define BBP1_TX_POWER_CTRL FIELD8(0x07) #define BBP1_TX_ANTENNA FIELD8(0x18) /* @@ -1715,6 +1746,13 @@ struct mac_iveiv_entry { */ #define BBP4_TX_BF FIELD8(0x01) #define BBP4_BANDWIDTH FIELD8(0x18) +#define BBP4_MAC_IF_CTRL FIELD8(0x40) + +/* + * BBP 109 + */ +#define BBP109_TX0_POWER FIELD8(0x0f) +#define BBP109_TX1_POWER FIELD8(0xf0) /* * BBP 138: Unknown @@ -1725,6 +1763,11 @@ struct mac_iveiv_entry { #define BBP138_TX_DAC2 FIELD8(0x40) /* + * BBP 152: Rx Ant + */ +#define BBP152_RX_DEFAULT_ANT FIELD8(0x80) + +/* * RFCSR registers * The wordsize of the RFCSR is 8 bits. */ @@ -1733,12 +1776,18 @@ struct mac_iveiv_entry { * RFCSR 1: */ #define RFCSR1_RF_BLOCK_EN FIELD8(0x01) +#define RFCSR1_PLL_PD FIELD8(0x02) #define RFCSR1_RX0_PD FIELD8(0x04) #define RFCSR1_TX0_PD FIELD8(0x08) #define RFCSR1_RX1_PD FIELD8(0x10) #define RFCSR1_TX1_PD FIELD8(0x20) /* + * RFCSR 2: + */ +#define RFCSR2_RESCAL_EN FIELD8(0x80) + +/* * RFCSR 6: */ #define RFCSR6_R1 FIELD8(0x03) @@ -1750,6 +1799,11 @@ struct mac_iveiv_entry { #define RFCSR7_RF_TUNING FIELD8(0x01) /* + * RFCSR 11: + */ +#define RFCSR11_R FIELD8(0x03) + +/* * RFCSR 12: */ #define RFCSR12_TX_POWER FIELD8(0x1f) @@ -1770,6 +1824,7 @@ struct mac_iveiv_entry { #define RFCSR17_TXMIXER_GAIN FIELD8(0x07) #define RFCSR17_TX_LO1_EN FIELD8(0x08) #define RFCSR17_R FIELD8(0x20) +#define RFCSR17_CODE FIELD8(0x7f) /* * RFCSR 20: @@ -1802,9 +1857,33 @@ struct mac_iveiv_entry { /* * RFCSR 30: */ +#define RFCSR30_TX_H20M FIELD8(0x02) +#define RFCSR30_RX_H20M FIELD8(0x04) +#define RFCSR30_RX_VCM FIELD8(0x18) #define RFCSR30_RF_CALIBRATION FIELD8(0x80) /* + * RFCSR 31: + */ +#define RFCSR31_RX_AGC_FC FIELD8(0x1f) +#define RFCSR31_RX_H20M FIELD8(0x20) + +/* + * RFCSR 38: + */ +#define RFCSR38_RX_LO1_EN FIELD8(0x20) + +/* + * RFCSR 39: + */ +#define RFCSR39_RX_LO2_EN FIELD8(0x80) + +/* + * RFCSR 49: + */ +#define RFCSR49_TX FIELD8(0x3f) + +/* * RF registers */ @@ -1837,6 +1916,11 @@ struct mac_iveiv_entry { */ /* + * Chip ID + */ +#define EEPROM_CHIP_ID 0x0000 + +/* * EEPROM Version */ #define EEPROM_VERSION 0x0001 @@ -1989,23 +2073,26 @@ struct mac_iveiv_entry { #define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) /* - * EEPROM Maximum TX power values + * EEPROM EIRP Maximum TX power values(unit: dbm) */ -#define EEPROM_MAX_TX_POWER 0x0027 -#define EEPROM_MAX_TX_POWER_24GHZ FIELD16(0x00ff) -#define EEPROM_MAX_TX_POWER_5GHZ FIELD16(0xff00) +#define EEPROM_EIRP_MAX_TX_POWER 0x0027 +#define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff) +#define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00) /* * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. * This is delta in 40MHZ. - * VALUE: Tx Power dalta value (MAX=4) + * VALUE: Tx Power dalta value, MAX=4(unit: dbm) * TYPE: 1: Plus the delta value, 0: minus the delta value - * TXPOWER: Enable: + * ENABLE: enable tx power compensation for 40BW */ #define EEPROM_TXPOWER_DELTA 0x0028 -#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) -#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) -#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) +#define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f) +#define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040) +#define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080) +#define EEPROM_TXPOWER_DELTA_VALUE_5G FIELD16(0x3f00) +#define EEPROM_TXPOWER_DELTA_TYPE_5G FIELD16(0x4000) +#define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000) /* * EEPROM TXPOWER 802.11BG @@ -2058,6 +2145,7 @@ struct mac_iveiv_entry { #define MCU_LED_LED_POLARITY 0x54 #define MCU_RADAR 0x60 #define MCU_BOOT_SIGNAL 0x72 +#define MCU_ANT_SELECT 0X73 #define MCU_BBP_SIGNAL 0x80 #define MCU_POWER_SAVE 0x83 @@ -2202,4 +2290,9 @@ struct mac_iveiv_entry { #define TXPOWER_A_TO_DEV(__txpower) \ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) +/* + * Board's maximun TX power limitation + */ +#define EIRP_MAX_TX_POWER_LIMIT 0x50 + #endif /* RT2800_H */ |
