diff options
Diffstat (limited to 'drivers/net/wireless/p54')
| -rw-r--r-- | drivers/net/wireless/p54/Kconfig | 63 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/net2280.h | 452 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54.h | 77 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54common.c | 1051 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54common.h | 254 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54pci.c | 697 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54pci.h | 106 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54usb.c | 910 | ||||
| -rw-r--r-- | drivers/net/wireless/p54/p54usb.h | 133 |
10 files changed, 3746 insertions, 0 deletions
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig new file mode 100644 index 0000000..d3469d0 --- /dev/null +++ b/drivers/net/wireless/p54/Kconfig @@ -0,0 +1,63 @@ +config P54_COMMON + tristate "Softmac Prism54 support" + depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL + ---help--- + This is common code for isl38xx based cards. + This module does nothing by itself - the USB/PCI frontends + also need to be enabled in order to support any devices. + + These devices require softmac firmware which can be found at + http://prism54.org/ + + If you choose to build a module, it'll be called p54common. + +config P54_USB + tristate "Prism54 USB support" + depends on P54_COMMON && USB + select CRC32 + ---help--- + This driver is for USB isl38xx based wireless cards. + These are USB based adapters found in devices such as: + + 3COM 3CRWE254G72 + SMC 2862W-G + Accton 802.11g WN4501 USB + Siemens Gigaset USB + Netgear WG121 + Netgear WG111 + Medion 40900, Roper Europe + Shuttle PN15, Airvast WM168g, IOGear GWU513 + Linksys WUSB54G + Linksys WUSB54G Portable + DLink DWL-G120 Spinnaker + DLink DWL-G122 + Belkin F5D7050 ver 1000 + Cohiba Proto board + SMC 2862W-G version 2 + U.S. Robotics U5 802.11g Adapter + FUJITSU E-5400 USB D1700 + Sagem XG703A + DLink DWL-G120 Cohiba + Spinnaker Proto board + Linksys WUSB54AG + Inventel UR054G + Spinnaker DUT + + These devices require softmac firmware which can be found at + http://prism54.org/ + + If you choose to build a module, it'll be called p54usb. + +config P54_PCI + tristate "Prism54 PCI support" + depends on P54_COMMON && PCI + ---help--- + This driver is for PCI isl38xx based wireless cards. + This driver supports most devices that are supported by the + fullmac prism54 driver plus many devices which are not + supported by the fullmac driver/firmware. + + This driver requires softmac firmware which can be found at + http://prism54.org/ + + If you choose to build a module, it'll be called p54pci. diff --git a/drivers/net/wireless/p54/Makefile b/drivers/net/wireless/p54/Makefile new file mode 100644 index 0000000..4fa9ce7 --- /dev/null +++ b/drivers/net/wireless/p54/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_P54_COMMON) += p54common.o +obj-$(CONFIG_P54_USB) += p54usb.o +obj-$(CONFIG_P54_PCI) += p54pci.o diff --git a/drivers/net/wireless/p54/net2280.h b/drivers/net/wireless/p54/net2280.h new file mode 100644 index 0000000..4915d9d --- /dev/null +++ b/drivers/net/wireless/p54/net2280.h @@ -0,0 +1,452 @@ +#ifndef NET2280_H +#define NET2280_H +/* + * NetChip 2280 high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + */ + +/* + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/*-------------------------------------------------------------------------*/ + +/* NET2280 MEMORY MAPPED REGISTERS + * + * The register layout came from the chip documentation, and the bit + * number definitions were extracted from chip specification. + * + * Use the shift operator ('<<') to build bit masks, with readl/writel + * to access the registers through PCI. + */ + +/* main registers, BAR0 + 0x0000 */ +struct net2280_regs { + /* offset 0x0000 */ + __le32 devinit; +#define LOCAL_CLOCK_FREQUENCY 8 +#define FORCE_PCI_RESET 7 +#define PCI_ID 6 +#define PCI_ENABLE 5 +#define FIFO_SOFT_RESET 4 +#define CFG_SOFT_RESET 3 +#define PCI_SOFT_RESET 2 +#define USB_SOFT_RESET 1 +#define M8051_RESET 0 + __le32 eectl; +#define EEPROM_ADDRESS_WIDTH 23 +#define EEPROM_CHIP_SELECT_ACTIVE 22 +#define EEPROM_PRESENT 21 +#define EEPROM_VALID 20 +#define EEPROM_BUSY 19 +#define EEPROM_CHIP_SELECT_ENABLE 18 +#define EEPROM_BYTE_READ_START 17 +#define EEPROM_BYTE_WRITE_START 16 +#define EEPROM_READ_DATA 8 +#define EEPROM_WRITE_DATA 0 + __le32 eeclkfreq; + u32 _unused0; + /* offset 0x0010 */ + + __le32 pciirqenb0; /* interrupt PCI master ... */ +#define SETUP_PACKET_INTERRUPT_ENABLE 7 +#define ENDPOINT_F_INTERRUPT_ENABLE 6 +#define ENDPOINT_E_INTERRUPT_ENABLE 5 +#define ENDPOINT_D_INTERRUPT_ENABLE 4 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 + __le32 pciirqenb1; +#define PCI_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + __le32 cpu_irqenb0; /* ... or onboard 8051 */ +#define SETUP_PACKET_INTERRUPT_ENABLE 7 +#define ENDPOINT_F_INTERRUPT_ENABLE 6 +#define ENDPOINT_E_INTERRUPT_ENABLE 5 +#define ENDPOINT_D_INTERRUPT_ENABLE 4 +#define ENDPOINT_C_INTERRUPT_ENABLE 3 +#define ENDPOINT_B_INTERRUPT_ENABLE 2 +#define ENDPOINT_A_INTERRUPT_ENABLE 1 +#define ENDPOINT_0_INTERRUPT_ENABLE 0 + __le32 cpu_irqenb1; +#define CPU_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_INTA_INTERRUPT_ENABLE 24 +#define PCI_PME_INTERRUPT_ENABLE 23 +#define PCI_SERR_INTERRUPT_ENABLE 22 +#define PCI_PERR_INTERRUPT_ENABLE 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + + /* offset 0x0020 */ + u32 _unused1; + __le32 usbirqenb1; +#define USB_INTERRUPT_ENABLE 31 +#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26 +#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25 +#define PCI_INTA_INTERRUPT_ENABLE 24 +#define PCI_PME_INTERRUPT_ENABLE 23 +#define PCI_SERR_INTERRUPT_ENABLE 22 +#define PCI_PERR_INTERRUPT_ENABLE 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19 +#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16 +#define GPIO_INTERRUPT_ENABLE 13 +#define DMA_D_INTERRUPT_ENABLE 12 +#define DMA_C_INTERRUPT_ENABLE 11 +#define DMA_B_INTERRUPT_ENABLE 10 +#define DMA_A_INTERRUPT_ENABLE 9 +#define EEPROM_DONE_INTERRUPT_ENABLE 8 +#define VBUS_INTERRUPT_ENABLE 7 +#define CONTROL_STATUS_INTERRUPT_ENABLE 6 +#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4 +#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2 +#define RESUME_INTERRUPT_ENABLE 1 +#define SOF_INTERRUPT_ENABLE 0 + __le32 irqstat0; +#define INTA_ASSERTED 12 +#define SETUP_PACKET_INTERRUPT 7 +#define ENDPOINT_F_INTERRUPT 6 +#define ENDPOINT_E_INTERRUPT 5 +#define ENDPOINT_D_INTERRUPT 4 +#define ENDPOINT_C_INTERRUPT 3 +#define ENDPOINT_B_INTERRUPT 2 +#define ENDPOINT_A_INTERRUPT 1 +#define ENDPOINT_0_INTERRUPT 0 + __le32 irqstat1; +#define POWER_STATE_CHANGE_INTERRUPT 27 +#define PCI_ARBITER_TIMEOUT_INTERRUPT 26 +#define PCI_PARITY_ERROR_INTERRUPT 25 +#define PCI_INTA_INTERRUPT 24 +#define PCI_PME_INTERRUPT 23 +#define PCI_SERR_INTERRUPT 22 +#define PCI_PERR_INTERRUPT 21 +#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20 +#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19 +#define PCI_RETRY_ABORT_INTERRUPT 17 +#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16 +#define GPIO_INTERRUPT 13 +#define DMA_D_INTERRUPT 12 +#define DMA_C_INTERRUPT 11 +#define DMA_B_INTERRUPT 10 +#define DMA_A_INTERRUPT 9 +#define EEPROM_DONE_INTERRUPT 8 +#define VBUS_INTERRUPT 7 +#define CONTROL_STATUS_INTERRUPT 6 +#define ROOT_PORT_RESET_INTERRUPT 4 +#define SUSPEND_REQUEST_INTERRUPT 3 +#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2 +#define RESUME_INTERRUPT 1 +#define SOF_INTERRUPT 0 + /* offset 0x0030 */ + __le32 idxaddr; + __le32 idxdata; + __le32 fifoctl; +#define PCI_BASE2_RANGE 16 +#define IGNORE_FIFO_AVAILABILITY 3 +#define PCI_BASE2_SELECT 2 +#define FIFO_CONFIGURATION_SELECT 0 + u32 _unused2; + /* offset 0x0040 */ + __le32 memaddr; +#define START 28 +#define DIRECTION 27 +#define FIFO_DIAGNOSTIC_SELECT 24 +#define MEMORY_ADDRESS 0 + __le32 memdata0; + __le32 memdata1; + u32 _unused3; + /* offset 0x0050 */ + __le32 gpioctl; +#define GPIO3_LED_SELECT 12 +#define GPIO3_INTERRUPT_ENABLE 11 +#define GPIO2_INTERRUPT_ENABLE 10 +#define GPIO1_INTERRUPT_ENABLE 9 +#define GPIO0_INTERRUPT_ENABLE 8 +#define GPIO3_OUTPUT_ENABLE 7 +#define GPIO2_OUTPUT_ENABLE 6 +#define GPIO1_OUTPUT_ENABLE 5 +#define GPIO0_OUTPUT_ENABLE 4 +#define GPIO3_DATA 3 +#define GPIO2_DATA 2 +#define GPIO1_DATA 1 +#define GPIO0_DATA 0 + __le32 gpiostat; +#define GPIO3_INTERRUPT 3 +#define GPIO2_INTERRUPT 2 +#define GPIO1_INTERRUPT 1 +#define GPIO0_INTERRUPT 0 +} __attribute__ ((packed)); + +/* usb control, BAR0 + 0x0080 */ +struct net2280_usb_regs { + /* offset 0x0080 */ + __le32 stdrsp; +#define STALL_UNSUPPORTED_REQUESTS 31 +#define SET_TEST_MODE 16 +#define GET_OTHER_SPEED_CONFIGURATION 15 +#define GET_DEVICE_QUALIFIER 14 +#define SET_ADDRESS 13 +#define ENDPOINT_SET_CLEAR_HALT 12 +#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11 +#define GET_STRING_DESCRIPTOR_2 10 +#define GET_STRING_DESCRIPTOR_1 9 +#define GET_STRING_DESCRIPTOR_0 8 +#define GET_SET_INTERFACE 6 +#define GET_SET_CONFIGURATION 5 +#define GET_CONFIGURATION_DESCRIPTOR 4 +#define GET_DEVICE_DESCRIPTOR 3 +#define GET_ENDPOINT_STATUS 2 +#define GET_INTERFACE_STATUS 1 +#define GET_DEVICE_STATUS 0 + __le32 prodvendid; +#define PRODUCT_ID 16 +#define VENDOR_ID 0 + __le32 relnum; + __le32 usbctl; +#define SERIAL_NUMBER_INDEX 16 +#define PRODUCT_ID_STRING_ENABLE 13 +#define VENDOR_ID_STRING_ENABLE 12 +#define USB_ROOT_PORT_WAKEUP_ENABLE 11 +#define VBUS_PIN 10 +#define TIMED_DISCONNECT 9 +#define SUSPEND_IMMEDIATELY 7 +#define SELF_POWERED_USB_DEVICE 6 +#define REMOTE_WAKEUP_SUPPORT 5 +#define PME_POLARITY 4 +#define USB_DETECT_ENABLE 3 +#define PME_WAKEUP_ENABLE 2 +#define DEVICE_REMOTE_WAKEUP_ENABLE 1 +#define SELF_POWERED_STATUS 0 + /* offset 0x0090 */ + __le32 usbstat; +#define HIGH_SPEED 7 +#define FULL_SPEED 6 +#define GENERATE_RESUME 5 +#define GENERATE_DEVICE_REMOTE_WAKEUP 4 + __le32 xcvrdiag; +#define FORCE_HIGH_SPEED_MODE 31 +#define FORCE_FULL_SPEED_MODE 30 +#define USB_TEST_MODE 24 +#define LINE_STATE 16 +#define TRANSCEIVER_OPERATION_MODE 2 +#define TRANSCEIVER_SELECT 1 +#define TERMINATION_SELECT 0 + __le32 setup0123; + __le32 setup4567; + /* offset 0x0090 */ + u32 _unused0; + __le32 ouraddr; +#define FORCE_IMMEDIATE 7 +#define OUR_USB_ADDRESS 0 + __le32 ourconfig; +} __attribute__ ((packed)); + +/* pci control, BAR0 + 0x0100 */ +struct net2280_pci_regs { + /* offset 0x0100 */ + __le32 pcimstctl; +#define PCI_ARBITER_PARK_SELECT 13 +#define PCI_MULTI LEVEL_ARBITER 12 +#define PCI_RETRY_ABORT_ENABLE 11 +#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10 +#define DMA_READ_MULTIPLE_ENABLE 9 +#define DMA_READ_LINE_ENABLE 8 +#define PCI_MASTER_COMMAND_SELECT 6 +#define MEM_READ_OR_WRITE 0 +#define IO_READ_OR_WRITE 1 +#define CFG_READ_OR_WRITE 2 +#define PCI_MASTER_START 5 +#define PCI_MASTER_READ_WRITE 4 +#define PCI_MASTER_WRITE 0 +#define PCI_MASTER_READ 1 +#define PCI_MASTER_BYTE_WRITE_ENABLES 0 + __le32 pcimstaddr; + __le32 pcimstdata; + __le32 pcimststat; +#define PCI_ARBITER_CLEAR 2 +#define PCI_EXTERNAL_ARBITER 1 +#define PCI_HOST_MODE 0 +} __attribute__ ((packed)); + +/* dma control, BAR0 + 0x0180 ... array of four structs like this, + * for channels 0..3. see also struct net2280_dma: descriptor + * that can be loaded into some of these registers. + */ +struct net2280_dma_regs { /* [11.7] */ + /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */ + __le32 dmactl; +#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25 +#define DMA_CLEAR_COUNT_ENABLE 21 +#define DESCRIPTOR_POLLING_RATE 19 +#define POLL_CONTINUOUS 0 +#define POLL_1_USEC 1 +#define POLL_100_USEC 2 +#define POLL_1_MSEC 3 +#define DMA_VALID_BIT_POLLING_ENABLE 18 +#define DMA_VALID_BIT_ENABLE 17 +#define DMA_SCATTER_GATHER_ENABLE 16 +#define DMA_OUT_AUTO_START_ENABLE 4 +#define DMA_PREEMPT_ENABLE 3 +#define DMA_FIFO_VALIDATE 2 +#define DMA_ENABLE 1 +#define DMA_ADDRESS_HOLD 0 + __le32 dmastat; +#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25 +#define DMA_TRANSACTION_DONE_INTERRUPT 24 +#define DMA_ABORT 1 +#define DMA_START 0 + u32 _unused0[2]; + /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */ + __le32 dmacount; +#define VALID_BIT 31 +#define DMA_DIRECTION 30 +#define DMA_DONE_INTERRUPT_ENABLE 29 +#define END_OF_CHAIN 28 +#define DMA_BYTE_COUNT_MASK ((1<<24)-1) +#define DMA_BYTE_COUNT 0 + __le32 dmaaddr; + __le32 dmadesc; + u32 _unused1; +} __attribute__ ((packed)); + +/* dedicated endpoint registers, BAR0 + 0x0200 */ + +struct net2280_dep_regs { /* [11.8] */ + /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */ + __le32 dep_cfg; + /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */ + __le32 dep_rsp; + u32 _unused[2]; +} __attribute__ ((packed)); + +/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs + * like this, for ep0 then the configurable endpoints A..F + * ep0 reserved for control; E and F have only 64 bytes of fifo + */ +struct net2280_ep_regs { /* [11.9] */ + /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */ + __le32 ep_cfg; +#define ENDPOINT_BYTE_COUNT 16 +#define ENDPOINT_ENABLE 10 +#define ENDPOINT_TYPE 8 +#define ENDPOINT_DIRECTION 7 +#define ENDPOINT_NUMBER 0 + __le32 ep_rsp; +#define SET_NAK_OUT_PACKETS 15 +#define SET_EP_HIDE_STATUS_PHASE 14 +#define SET_EP_FORCE_CRC_ERROR 13 +#define SET_INTERRUPT_MODE 12 +#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11 +#define SET_NAK_OUT_PACKETS_MODE 10 +#define SET_ENDPOINT_TOGGLE 9 +#define SET_ENDPOINT_HALT 8 +#define CLEAR_NAK_OUT_PACKETS 7 +#define CLEAR_EP_HIDE_STATUS_PHASE 6 +#define CLEAR_EP_FORCE_CRC_ERROR 5 +#define CLEAR_INTERRUPT_MODE 4 +#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3 +#define CLEAR_NAK_OUT_PACKETS_MODE 2 +#define CLEAR_ENDPOINT_TOGGLE 1 +#define CLEAR_ENDPOINT_HALT 0 + __le32 ep_irqenb; +#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5 +#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3 +#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2 +#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1 +#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0 + __le32 ep_stat; +#define FIFO_VALID_COUNT 24 +#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22 +#define TIMEOUT 21 +#define USB_STALL_SENT 20 +#define USB_IN_NAK_SENT 19 +#define USB_IN_ACK_RCVD 18 +#define USB_OUT_PING_NAK_SENT 17 +#define USB_OUT_ACK_SENT 16 +#define FIFO_OVERFLOW 13 +#define FIFO_UNDERFLOW 12 +#define FIFO_FULL 11 +#define FIFO_EMPTY 10 +#define FIFO_FLUSH 9 +#define SHORT_PACKET_OUT_DONE_INTERRUPT 6 +#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5 +#define NAK_OUT_PACKETS 4 +#define DATA_PACKET_RECEIVED_INTERRUPT 3 +#define DATA_PACKET_TRANSMITTED_INTERRUPT 2 +#define DATA_OUT_PING_TOKEN_INTERRUPT 1 +#define DATA_IN_TOKEN_INTERRUPT 0 + /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */ + __le32 ep_avail; + __le32 ep_data; + u32 _unused0[2]; +} __attribute__ ((packed)); + +struct net2280_reg_write { + __le16 port; + __le32 addr; + __le32 val; +} __attribute__ ((packed)); + +struct net2280_reg_read { + __le16 port; + __le32 addr; +} __attribute__ ((packed)); +#endif /* NET2280_H */ diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h new file mode 100644 index 0000000..06d2c67 --- /dev/null +++ b/drivers/net/wireless/p54/p54.h @@ -0,0 +1,77 @@ +#ifndef PRISM54_H +#define PRISM54_H + +/* + * Shared defines for all mac80211 Prism54 code + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +enum control_frame_types { + P54_CONTROL_TYPE_FILTER_SET = 0, + P54_CONTROL_TYPE_CHANNEL_CHANGE, + P54_CONTROL_TYPE_FREQDONE, + P54_CONTROL_TYPE_DCFINIT, + P54_CONTROL_TYPE_FREEQUEUE = 7, + P54_CONTROL_TYPE_TXDONE, + P54_CONTROL_TYPE_PING, + P54_CONTROL_TYPE_STAT_READBACK, + P54_CONTROL_TYPE_BBP, + P54_CONTROL_TYPE_EEPROM_READBACK, + P54_CONTROL_TYPE_LED +}; + +struct p54_control_hdr { + __le16 magic1; + __le16 len; + __le32 req_id; + __le16 type; /* enum control_frame_types */ + u8 retry1; + u8 retry2; + u8 data[0]; +} __attribute__ ((packed)); + +#define EEPROM_READBACK_LEN (sizeof(struct p54_control_hdr) + 4 /* p54_eeprom_lm86 */) +#define MAX_RX_SIZE (IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct p54_control_hdr) + 20 /* length of struct p54_rx_hdr */ + 16 ) + +#define ISL38XX_DEV_FIRMWARE_ADDR 0x20000 + +struct p54_common { + u32 rx_start; + u32 rx_end; + struct sk_buff_head tx_queue; + void (*tx)(struct ieee80211_hw *dev, struct p54_control_hdr *data, + size_t len, int free_on_tx); + int (*open)(struct ieee80211_hw *dev); + void (*stop)(struct ieee80211_hw *dev); + int mode; + u8 mac_addr[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + struct pda_iq_autocal_entry *iq_autocal; + unsigned int iq_autocal_len; + struct pda_channel_output_limit *output_limit; + unsigned int output_limit_len; + struct pda_pa_curve_data *curve_data; + __le16 rxhw; + u8 version; + unsigned int tx_hdr_len; + void *cached_vdcf; + unsigned int fw_var; + struct ieee80211_tx_queue_stats tx_stats; +}; + +int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb); +void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw); +int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len); +void p54_fill_eeprom_readback(struct p54_control_hdr *hdr); +struct ieee80211_hw *p54_init_common(size_t priv_data_len); +void p54_free_common(struct ieee80211_hw *dev); + +#endif /* PRISM54_H */ diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c new file mode 100644 index 0000000..63f9bad --- /dev/null +++ b/drivers/net/wireless/p54/p54common.c @@ -0,0 +1,1051 @@ + +/* + * Common code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> + +#include <net/mac80211.h> + +#include "p54.h" +#include "p54common.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_DESCRIPTION("Softmac Prism54 common code"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54common"); + +static struct ieee80211_rate p54_rates[] = { + { .bitrate = 10, .hw_value = 0, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static struct ieee80211_channel p54_channels[] = { + { .center_freq = 2412, .hw_value = 1, }, + { .center_freq = 2417, .hw_value = 2, }, + { .center_freq = 2422, .hw_value = 3, }, + { .center_freq = 2427, .hw_value = 4, }, + { .center_freq = 2432, .hw_value = 5, }, + { .center_freq = 2437, .hw_value = 6, }, + { .center_freq = 2442, .hw_value = 7, }, + { .center_freq = 2447, .hw_value = 8, }, + { .center_freq = 2452, .hw_value = 9, }, + { .center_freq = 2457, .hw_value = 10, }, + { .center_freq = 2462, .hw_value = 11, }, + { .center_freq = 2467, .hw_value = 12, }, + { .center_freq = 2472, .hw_value = 13, }, + { .center_freq = 2484, .hw_value = 14, }, +}; + +static struct ieee80211_supported_band band_2GHz = { + .channels = p54_channels, + .n_channels = ARRAY_SIZE(p54_channels), + .bitrates = p54_rates, + .n_bitrates = ARRAY_SIZE(p54_rates), +}; + + +void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) +{ + struct p54_common *priv = dev->priv; + struct bootrec_exp_if *exp_if; + struct bootrec *bootrec; + u32 *data = (u32 *)fw->data; + u32 *end_data = (u32 *)fw->data + (fw->size >> 2); + u8 *fw_version = NULL; + size_t len; + int i; + + if (priv->rx_start) + return; + + while (data < end_data && *data) + data++; + + while (data < end_data && !*data) + data++; + + bootrec = (struct bootrec *) data; + + while (bootrec->data <= end_data && + (bootrec->data + (len = le32_to_cpu(bootrec->len))) <= end_data) { + u32 code = le32_to_cpu(bootrec->code); + switch (code) { + case BR_CODE_COMPONENT_ID: + switch (be32_to_cpu(*(__be32 *)bootrec->data)) { + case FW_FMAC: + printk(KERN_INFO "p54: FreeMAC firmware\n"); + break; + case FW_LM20: + printk(KERN_INFO "p54: LM20 firmware\n"); + break; + case FW_LM86: + printk(KERN_INFO "p54: LM86 firmware\n"); + break; + case FW_LM87: + printk(KERN_INFO "p54: LM87 firmware - not supported yet!\n"); + break; + default: + printk(KERN_INFO "p54: unknown firmware\n"); + break; + } + break; + case BR_CODE_COMPONENT_VERSION: + /* 24 bytes should be enough for all firmwares */ + if (strnlen((unsigned char*)bootrec->data, 24) < 24) + fw_version = (unsigned char*)bootrec->data; + break; + case BR_CODE_DESCR: + priv->rx_start = le32_to_cpu(((__le32 *)bootrec->data)[1]); + /* FIXME add sanity checking */ + priv->rx_end = le32_to_cpu(((__le32 *)bootrec->data)[2]) - 0x3500; + break; + case BR_CODE_EXPOSED_IF: + exp_if = (struct bootrec_exp_if *) bootrec->data; + for (i = 0; i < (len * sizeof(*exp_if) / 4); i++) + if (exp_if[i].if_id == cpu_to_le16(0x1a)) + priv->fw_var = le16_to_cpu(exp_if[i].variant); + break; + case BR_CODE_DEPENDENT_IF: + break; + case BR_CODE_END_OF_BRA: + case LEGACY_BR_CODE_END_OF_BRA: + end_data = NULL; + break; + default: + break; + } + bootrec = (struct bootrec *)&bootrec->data[len]; + } + + if (fw_version) + printk(KERN_INFO "p54: FW rev %s - Softmac protocol %x.%x\n", + fw_version, priv->fw_var >> 8, priv->fw_var & 0xff); + + if (priv->fw_var >= 0x300) { + /* Firmware supports QoS, use it! */ + priv->tx_stats.data[0].limit = 3; + priv->tx_stats.data[1].limit = 4; + priv->tx_stats.data[2].limit = 3; + priv->tx_stats.data[3].limit = 1; + dev->queues = 4; + } +} +EXPORT_SYMBOL_GPL(p54_parse_firmware); + +static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev, + struct pda_pa_curve_data *curve_data) +{ + struct p54_common *priv = dev->priv; + struct pda_pa_curve_data_sample_rev1 *rev1; + struct pda_pa_curve_data_sample_rev0 *rev0; + size_t cd_len = sizeof(*curve_data) + + (curve_data->points_per_channel*sizeof(*rev1) + 2) * + curve_data->channels; + unsigned int i, j; + void *source, *target; + + priv->curve_data = kmalloc(cd_len, GFP_KERNEL); + if (!priv->curve_data) + return -ENOMEM; + + memcpy(priv->curve_data, curve_data, sizeof(*curve_data)); + source = curve_data->data; + target = priv->curve_data->data; + for (i = 0; i < curve_data->channels; i++) { + __le16 *freq = source; + source += sizeof(__le16); + *((__le16 *)target) = *freq; + target += sizeof(__le16); + for (j = 0; j < curve_data->points_per_channel; j++) { + rev1 = target; + rev0 = source; + + rev1->rf_power = rev0->rf_power; + rev1->pa_detector = rev0->pa_detector; + rev1->data_64qam = rev0->pcv; + /* "invent" the points for the other modulations */ +#define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y) + rev1->data_16qam = SUB(rev0->pcv, 12); + rev1->data_qpsk = SUB(rev1->data_16qam, 12); + rev1->data_bpsk = SUB(rev1->data_qpsk, 12); + rev1->data_barker= SUB(rev1->data_bpsk, 14); +#undef SUB + target += sizeof(*rev1); + source += sizeof(*rev0); + } + } + + return 0; +} + +int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) +{ + struct p54_common *priv = dev->priv; + struct eeprom_pda_wrap *wrap = NULL; + struct pda_entry *entry; + unsigned int data_len, entry_len; + void *tmp; + int err; + u8 *end = (u8 *)eeprom + len; + + wrap = (struct eeprom_pda_wrap *) eeprom; + entry = (void *)wrap->data + le16_to_cpu(wrap->len); + + /* verify that at least the entry length/code fits */ + while ((u8 *)entry <= end - sizeof(*entry)) { + entry_len = le16_to_cpu(entry->len); + data_len = ((entry_len - 1) << 1); + + /* abort if entry exceeds whole structure */ + if ((u8 *)entry + sizeof(*entry) + data_len > end) + break; + + switch (le16_to_cpu(entry->code)) { + case PDR_MAC_ADDRESS: + SET_IEEE80211_PERM_ADDR(dev, entry->data); + break; + case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: + if (data_len < 2) { + err = -EINVAL; + goto err; + } + + if (2 + entry->data[1]*sizeof(*priv->output_limit) > data_len) { + err = -EINVAL; + goto err; + } + + priv->output_limit = kmalloc(entry->data[1] * + sizeof(*priv->output_limit), GFP_KERNEL); + + if (!priv->output_limit) { + err = -ENOMEM; + goto err; + } + + memcpy(priv->output_limit, &entry->data[2], + entry->data[1]*sizeof(*priv->output_limit)); + priv->output_limit_len = entry->data[1]; + break; + case PDR_PRISM_PA_CAL_CURVE_DATA: + if (data_len < sizeof(struct pda_pa_curve_data)) { + err = -EINVAL; + goto err; + } + + if (((struct pda_pa_curve_data *)entry->data)->cal_method_rev) { + priv->curve_data = kmalloc(data_len, GFP_KERNEL); + if (!priv->curve_data) { + err = -ENOMEM; + goto err; + } + + memcpy(priv->curve_data, entry->data, data_len); + } else { + err = p54_convert_rev0_to_rev1(dev, (struct pda_pa_curve_data *)entry->data); + if (err) + goto err; + } + + break; + case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: + priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); + if (!priv->iq_autocal) { + err = -ENOMEM; + goto err; + } + + memcpy(priv->iq_autocal, entry->data, data_len); + priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); + break; + case PDR_INTERFACE_LIST: + tmp = entry->data; + while ((u8 *)tmp < entry->data + data_len) { + struct bootrec_exp_if *exp_if = tmp; + if (le16_to_cpu(exp_if->if_id) == 0xF) + priv->rxhw = exp_if->variant & cpu_to_le16(0x07); + tmp += sizeof(struct bootrec_exp_if); + } + break; + case PDR_HARDWARE_PLATFORM_COMPONENT_ID: + priv->version = *(u8 *)(entry->data + 1); + break; + case PDR_END: + /* make it overrun */ + entry_len = len; + break; + default: + printk(KERN_INFO "p54: unknown eeprom code : 0x%x\n", + le16_to_cpu(entry->code)); + break; + } + + entry = (void *)entry + (entry_len + 1)*2; + } + + if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) { + printk(KERN_ERR "p54: not all required entries found in eeprom!\n"); + err = -EINVAL; + goto err; + } + + return 0; + + err: + if (priv->iq_autocal) { + kfree(priv->iq_autocal); + priv->iq_autocal = NULL; + } + + if (priv->output_limit) { + kfree(priv->output_limit); + priv->output_limit = NULL; + } + + if (priv->curve_data) { + kfree(priv->curve_data); + priv->curve_data = NULL; + } + + printk(KERN_ERR "p54: eeprom parse failed!\n"); + return err; +} +EXPORT_SYMBOL_GPL(p54_parse_eeprom); + +void p54_fill_eeprom_readback(struct p54_control_hdr *hdr) +{ + struct p54_eeprom_lm86 *eeprom_hdr; + + hdr->magic1 = cpu_to_le16(0x8000); + hdr->len = cpu_to_le16(sizeof(*eeprom_hdr) + 0x2000); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK); + hdr->retry1 = hdr->retry2 = 0; + eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data; + eeprom_hdr->offset = 0x0; + eeprom_hdr->len = cpu_to_le16(0x2000); +} +EXPORT_SYMBOL_GPL(p54_fill_eeprom_readback); + +static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54_rx_hdr *hdr = (struct p54_rx_hdr *) skb->data; + struct ieee80211_rx_status rx_status = {0}; + u16 freq = le16_to_cpu(hdr->freq); + + rx_status.ssi = hdr->rssi; + /* XX correct? */ + rx_status.rate_idx = hdr->rate & 0xf; + rx_status.freq = freq; + rx_status.band = IEEE80211_BAND_2GHZ; + rx_status.antenna = hdr->antenna; + rx_status.mactime = le64_to_cpu(hdr->timestamp); + rx_status.flag |= RX_FLAG_TSFT; + + skb_pull(skb, sizeof(*hdr)); + skb_trim(skb, le16_to_cpu(hdr->len)); + + ieee80211_rx_irqsafe(dev, skb, &rx_status); +} + +static void inline p54_wake_free_queues(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int i; + + /* ieee80211_start_queues is great if all queues are really empty. + * But, what if some are full? */ + + for (i = 0; i < dev->queues; i++) + if (priv->tx_stats.data[i].len < priv->tx_stats.data[i].limit) + ieee80211_wake_queue(dev, i); +} + +static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; + struct p54_frame_sent_hdr *payload = (struct p54_frame_sent_hdr *) hdr->data; + struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next; + u32 addr = le32_to_cpu(hdr->req_id) - 0x70; + struct memrecord *range = NULL; + u32 freed = 0; + u32 last_addr = priv->rx_start; + + while (entry != (struct sk_buff *)&priv->tx_queue) { + range = (struct memrecord *)&entry->cb; + if (range->start_addr == addr) { + struct ieee80211_tx_status status; + struct p54_control_hdr *entry_hdr; + struct p54_tx_control_allocdata *entry_data; + int pad = 0; + + if (entry->next != (struct sk_buff *)&priv->tx_queue) + freed = ((struct memrecord *)&entry->next->cb)->start_addr - last_addr; + else + freed = priv->rx_end - last_addr; + + last_addr = range->end_addr; + __skb_unlink(entry, &priv->tx_queue); + if (!range->control) { + kfree_skb(entry); + break; + } + memset(&status, 0, sizeof(status)); + memcpy(&status.control, range->control, + sizeof(status.control)); + kfree(range->control); + priv->tx_stats.data[status.control.queue].len--; + + entry_hdr = (struct p54_control_hdr *) entry->data; + entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; + if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) + pad = entry_data->align[0]; + + if (!(status.control.flags & IEEE80211_TXCTL_NO_ACK)) { + if (!(payload->status & 0x01)) + status.flags |= IEEE80211_TX_STATUS_ACK; + else + status.excessive_retries = 1; + } + status.retry_count = payload->retries - 1; + status.ack_signal = le16_to_cpu(payload->ack_rssi); + skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); + ieee80211_tx_status_irqsafe(dev, entry, &status); + break; + } else + last_addr = range->end_addr; + entry = entry->next; + } + + if (freed >= IEEE80211_MAX_RTS_THRESHOLD + 0x170 + + sizeof(struct p54_control_hdr)) + p54_wake_free_queues(dev); +} + +static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; + + switch (le16_to_cpu(hdr->type)) { + case P54_CONTROL_TYPE_TXDONE: + p54_rx_frame_sent(dev, skb); + break; + case P54_CONTROL_TYPE_BBP: + break; + default: + printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n", + wiphy_name(dev->wiphy), le16_to_cpu(hdr->type)); + break; + } +} + +/* returns zero if skb can be reused */ +int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) +{ + u8 type = le16_to_cpu(*((__le16 *)skb->data)) >> 8; + switch (type) { + case 0x00: + case 0x01: + p54_rx_data(dev, skb); + return -1; + case 0x4d: + /* TODO: do something better... but then again, I've never seen this happen */ + printk(KERN_ERR "%s: Received fault. Probably need to restart hardware now..\n", + wiphy_name(dev->wiphy)); + break; + case 0x80: + p54_rx_control(dev, skb); + break; + default: + printk(KERN_ERR "%s: unknown frame RXed (0x%02x)\n", + wiphy_name(dev->wiphy), type); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(p54_rx); + +/* + * So, the firmware is somewhat stupid and doesn't know what places in its + * memory incoming data should go to. By poking around in the firmware, we + * can find some unused memory to upload our packets to. However, data that we + * want the card to TX needs to stay intact until the card has told us that + * it is done with it. This function finds empty places we can upload to and + * marks allocated areas as reserved if necessary. p54_rx_frame_sent frees + * allocated areas. + */ +static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, + struct p54_control_hdr *data, u32 len, + struct ieee80211_tx_control *control) +{ + struct p54_common *priv = dev->priv; + struct sk_buff *entry = priv->tx_queue.next; + struct sk_buff *target_skb = NULL; + struct memrecord *range; + u32 last_addr = priv->rx_start; + u32 largest_hole = 0; + u32 target_addr = priv->rx_start; + unsigned long flags; + unsigned int left; + len = (len + 0x170 + 3) & ~0x3; /* 0x70 headroom, 0x100 tailroom */ + + spin_lock_irqsave(&priv->tx_queue.lock, flags); + left = skb_queue_len(&priv->tx_queue); + while (left--) { + u32 hole_size; + range = (struct memrecord *)&entry->cb; + hole_size = range->start_addr - last_addr; + if (!target_skb && hole_size >= len) { + target_skb = entry->prev; + hole_size -= len; + target_addr = last_addr; + } + largest_hole = max(largest_hole, hole_size); + last_addr = range->end_addr; + entry = entry->next; + } + if (!target_skb && priv->rx_end - last_addr >= len) { + target_skb = priv->tx_queue.prev; + largest_hole = max(largest_hole, priv->rx_end - last_addr - len); + if (!skb_queue_empty(&priv->tx_queue)) { + range = (struct memrecord *)&target_skb->cb; + target_addr = range->end_addr; + } + } else + largest_hole = max(largest_hole, priv->rx_end - last_addr); + + if (skb) { + range = (struct memrecord *)&skb->cb; + range->start_addr = target_addr; + range->end_addr = target_addr + len; + range->control = control; + __skb_queue_after(&priv->tx_queue, target_skb, skb); + if (largest_hole < IEEE80211_MAX_RTS_THRESHOLD + 0x170 + + sizeof(struct p54_control_hdr)) + ieee80211_stop_queues(dev); + } + spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + + data->req_id = cpu_to_le32(target_addr + 0x70); +} + +static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + struct ieee80211_tx_queue_stats_data *current_queue; + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_allocdata *txhdr; + struct ieee80211_tx_control *control_copy; + size_t padding, len; + u8 rate; + + current_queue = &priv->tx_stats.data[control->queue]; + if (unlikely(current_queue->len > current_queue->limit)) + return NETDEV_TX_BUSY; + current_queue->len++; + current_queue->count++; + if (current_queue->len == current_queue->limit) + ieee80211_stop_queue(dev, control->queue); + + padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; + len = skb->len; + + control_copy = kmalloc(sizeof(*control), GFP_ATOMIC); + if (control_copy) + memcpy(control_copy, control, sizeof(*control)); + + txhdr = (struct p54_tx_control_allocdata *) + skb_push(skb, sizeof(*txhdr) + padding); + hdr = (struct p54_control_hdr *) skb_push(skb, sizeof(*hdr)); + + if (padding) + hdr->magic1 = cpu_to_le16(0x4010); + else + hdr->magic1 = cpu_to_le16(0x0010); + hdr->len = cpu_to_le16(len); + hdr->type = (control->flags & IEEE80211_TXCTL_NO_ACK) ? 0 : cpu_to_le16(1); + hdr->retry1 = hdr->retry2 = control->retry_limit; + p54_assign_address(dev, skb, hdr, skb->len, control_copy); + + memset(txhdr->wep_key, 0x0, 16); + txhdr->padding = 0; + txhdr->padding2 = 0; + + /* TODO: add support for alternate retry TX rates */ + rate = control->tx_rate->hw_value; + if (control->flags & IEEE80211_TXCTL_SHORT_PREAMBLE) + rate |= 0x10; + if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) + rate |= 0x40; + else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + rate |= 0x20; + memset(txhdr->rateset, rate, 8); + txhdr->wep_key_present = 0; + txhdr->wep_key_len = 0; + txhdr->frame_type = cpu_to_le32(control->queue + 4); + txhdr->magic4 = 0; + txhdr->antenna = (control->antenna_sel_tx == 0) ? + 2 : control->antenna_sel_tx - 1; + txhdr->output_power = 0x7f; // HW Maximum + txhdr->magic5 = (control->flags & IEEE80211_TXCTL_NO_ACK) ? + 0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23)); + if (padding) + txhdr->align[0] = padding; + + priv->tx(dev, hdr, skb->len, 0); + return 0; +} + +static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, + const u8 *dst, const u8 *src, u8 antenna, + u32 magic3, u32 magic8, u32 magic9) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_filter *filter; + + hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) + + priv->tx_hdr_len, GFP_ATOMIC); + if (!hdr) + return -ENOMEM; + + hdr = (void *)hdr + priv->tx_hdr_len; + + filter = (struct p54_tx_control_filter *) hdr->data; + hdr->magic1 = cpu_to_le16(0x8001); + hdr->len = cpu_to_le16(sizeof(*filter)); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*filter), NULL); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_FILTER_SET); + + filter->filter_type = cpu_to_le16(filter_type); + memcpy(filter->dst, dst, ETH_ALEN); + if (!src) + memset(filter->src, ~0, ETH_ALEN); + else + memcpy(filter->src, src, ETH_ALEN); + filter->antenna = antenna; + filter->magic3 = cpu_to_le32(magic3); + filter->rx_addr = cpu_to_le32(priv->rx_end); + filter->max_rx = cpu_to_le16(0x0620); /* FIXME: for usb ver 1.. maybe */ + filter->rxhw = priv->rxhw; + filter->magic8 = cpu_to_le16(magic8); + filter->magic9 = cpu_to_le16(magic9); + + priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*filter), 1); + return 0; +} + +static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_channel *chan; + unsigned int i; + size_t payload_len = sizeof(*chan) + sizeof(u32)*2 + + sizeof(*chan->curve_data) * + priv->curve_data->points_per_channel; + void *entry; + + hdr = kzalloc(sizeof(*hdr) + payload_len + + priv->tx_hdr_len, GFP_KERNEL); + if (!hdr) + return -ENOMEM; + + hdr = (void *)hdr + priv->tx_hdr_len; + + chan = (struct p54_tx_control_channel *) hdr->data; + + hdr->magic1 = cpu_to_le16(0x8001); + hdr->len = cpu_to_le16(sizeof(*chan)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_CHANNEL_CHANGE); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + payload_len, NULL); + + chan->magic1 = cpu_to_le16(0x1); + chan->magic2 = cpu_to_le16(0x0); + + for (i = 0; i < priv->iq_autocal_len; i++) { + if (priv->iq_autocal[i].freq != freq) + continue; + + memcpy(&chan->iq_autocal, &priv->iq_autocal[i], + sizeof(*priv->iq_autocal)); + break; + } + if (i == priv->iq_autocal_len) + goto err; + + for (i = 0; i < priv->output_limit_len; i++) { + if (priv->output_limit[i].freq != freq) + continue; + + chan->val_barker = 0x38; + chan->val_bpsk = priv->output_limit[i].val_bpsk; + chan->val_qpsk = priv->output_limit[i].val_qpsk; + chan->val_16qam = priv->output_limit[i].val_16qam; + chan->val_64qam = priv->output_limit[i].val_64qam; + break; + } + if (i == priv->output_limit_len) + goto err; + + chan->pa_points_per_curve = priv->curve_data->points_per_channel; + + entry = priv->curve_data->data; + for (i = 0; i < priv->curve_data->channels; i++) { + if (*((__le16 *)entry) != freq) { + entry += sizeof(__le16); + entry += sizeof(struct pda_pa_curve_data_sample_rev1) * + chan->pa_points_per_curve; + continue; + } + + entry += sizeof(__le16); + memcpy(chan->curve_data, entry, sizeof(*chan->curve_data) * + chan->pa_points_per_curve); + break; + } + + memcpy(hdr->data + payload_len - 4, &chan->val_bpsk, 4); + + priv->tx(dev, hdr, sizeof(*hdr) + payload_len, 1); + return 0; + + err: + printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); + kfree(hdr); + return -EINVAL; +} + +static int p54_set_leds(struct ieee80211_hw *dev, int mode, int link, int act) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_led *led; + + hdr = kzalloc(sizeof(*hdr) + sizeof(*led) + + priv->tx_hdr_len, GFP_KERNEL); + if (!hdr) + return -ENOMEM; + + hdr = (void *)hdr + priv->tx_hdr_len; + hdr->magic1 = cpu_to_le16(0x8001); + hdr->len = cpu_to_le16(sizeof(*led)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_LED); + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*led), NULL); + + led = (struct p54_tx_control_led *) hdr->data; + led->mode = cpu_to_le16(mode); + led->led_permanent = cpu_to_le16(link); + led->led_temporary = cpu_to_le16(act); + led->duration = cpu_to_le16(1000); + + priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*led), 1); + + return 0; +} + +#define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, _txop) \ +do { \ + queue.aifs = cpu_to_le16(ai_fs); \ + queue.cwmin = cpu_to_le16(cw_min); \ + queue.cwmax = cpu_to_le16(cw_max); \ + queue.txop = cpu_to_le16(_txop); \ +} while(0) + +static void p54_init_vdcf(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_vdcf *vdcf; + + /* all USB V1 adapters need a extra headroom */ + hdr = (void *)priv->cached_vdcf + priv->tx_hdr_len; + hdr->magic1 = cpu_to_le16(0x8001); + hdr->len = cpu_to_le16(sizeof(*vdcf)); + hdr->type = cpu_to_le16(P54_CONTROL_TYPE_DCFINIT); + hdr->req_id = cpu_to_le32(priv->rx_start); + + vdcf = (struct p54_tx_control_vdcf *) hdr->data; + + P54_SET_QUEUE(vdcf->queue[0], 0x0002, 0x0003, 0x0007, 47); + P54_SET_QUEUE(vdcf->queue[1], 0x0002, 0x0007, 0x000f, 94); + P54_SET_QUEUE(vdcf->queue[2], 0x0003, 0x000f, 0x03ff, 0); + P54_SET_QUEUE(vdcf->queue[3], 0x0007, 0x000f, 0x03ff, 0); +} + +static void p54_set_vdcf(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct p54_control_hdr *hdr; + struct p54_tx_control_vdcf *vdcf; + + hdr = (void *)priv->cached_vdcf + priv->tx_hdr_len; + + p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*vdcf), NULL); + + vdcf = (struct p54_tx_control_vdcf *) hdr->data; + + if (dev->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) { + vdcf->slottime = 9; + vdcf->magic1 = 0x00; + vdcf->magic2 = 0x10; + } else { + vdcf->slottime = 20; + vdcf->magic1 = 0x0a; + vdcf->magic2 = 0x06; + } + + /* (see prism54/isl_oid.h for further details) */ + vdcf->frameburst = cpu_to_le16(0); + + priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*vdcf), 0); +} + +static int p54_start(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int err; + + err = priv->open(dev); + if (!err) + priv->mode = IEEE80211_IF_TYPE_MNTR; + + return err; +} + +static void p54_stop(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + struct sk_buff *skb; + while ((skb = skb_dequeue(&priv->tx_queue))) { + struct memrecord *range = (struct memrecord *)&skb->cb; + if (range->control) + kfree(range->control); + kfree_skb(skb); + } + priv->stop(dev); + priv->mode = IEEE80211_IF_TYPE_INVALID; +} + +static int p54_add_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct p54_common *priv = dev->priv; + + if (priv->mode != IEEE80211_IF_TYPE_MNTR) + return -EOPNOTSUPP; + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + priv->mode = conf->type; + break; + default: + return -EOPNOTSUPP; + } + + memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); + + p54_set_filter(dev, 0, priv->mac_addr, NULL, 0, 1, 0, 0xF642); + p54_set_filter(dev, 0, priv->mac_addr, NULL, 1, 0, 0, 0xF642); + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + p54_set_filter(dev, 1, priv->mac_addr, NULL, 0, 0x15F, 0x1F4, 0); + break; + default: + BUG(); /* impossible */ + break; + } + + p54_set_leds(dev, 1, 0, 0); + + return 0; +} + +static void p54_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct p54_common *priv = dev->priv; + priv->mode = IEEE80211_IF_TYPE_MNTR; + memset(priv->mac_addr, 0, ETH_ALEN); + p54_set_filter(dev, 0, priv->mac_addr, NULL, 2, 0, 0, 0); +} + +static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +{ + int ret; + + ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq)); + p54_set_vdcf(dev); + return ret; +} + +static int p54_config_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct p54_common *priv = dev->priv; + + p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642); + p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0); + p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0); + memcpy(priv->bssid, conf->bssid, ETH_ALEN); + return 0; +} + +static void p54_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_mc_list *mclist) +{ + struct p54_common *priv = dev->priv; + + *total_flags &= FIF_BCN_PRBRESP_PROMISC; + + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + p54_set_filter(dev, 0, priv->mac_addr, + NULL, 2, 0, 0, 0); + else + p54_set_filter(dev, 0, priv->mac_addr, + priv->bssid, 2, 0, 0, 0); + } +} + +static int p54_conf_tx(struct ieee80211_hw *dev, int queue, + const struct ieee80211_tx_queue_params *params) +{ + struct p54_common *priv = dev->priv; + struct p54_tx_control_vdcf *vdcf; + + vdcf = (struct p54_tx_control_vdcf *)(((struct p54_control_hdr *) + ((void *)priv->cached_vdcf + priv->tx_hdr_len))->data); + + if ((params) && !((queue < 0) || (queue > 4))) { + P54_SET_QUEUE(vdcf->queue[queue], params->aifs, + params->cw_min, params->cw_max, params->txop); + } else + return -EINVAL; + + p54_set_vdcf(dev); + + return 0; +} + +static int p54_get_stats(struct ieee80211_hw *dev, + struct ieee80211_low_level_stats *stats) +{ + /* TODO */ + return 0; +} + +static int p54_get_tx_stats(struct ieee80211_hw *dev, + struct ieee80211_tx_queue_stats *stats) +{ + struct p54_common *priv = dev->priv; + unsigned int i; + + for (i = 0; i < dev->queues; i++) + memcpy(&stats->data[i], &priv->tx_stats.data[i], + sizeof(stats->data[i])); + + return 0; +} + +static const struct ieee80211_ops p54_ops = { + .tx = p54_tx, + .start = p54_start, + .stop = p54_stop, + .add_interface = p54_add_interface, + .remove_interface = p54_remove_interface, + .config = p54_config, + .config_interface = p54_config_interface, + .configure_filter = p54_configure_filter, + .conf_tx = p54_conf_tx, + .get_stats = p54_get_stats, + .get_tx_stats = p54_get_tx_stats +}; + +struct ieee80211_hw *p54_init_common(size_t priv_data_len) +{ + struct ieee80211_hw *dev; + struct p54_common *priv; + + dev = ieee80211_alloc_hw(priv_data_len, &p54_ops); + if (!dev) + return NULL; + + priv = dev->priv; + priv->mode = IEEE80211_IF_TYPE_INVALID; + skb_queue_head_init(&priv->tx_queue); + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; + dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */ + IEEE80211_HW_RX_INCLUDES_FCS; + dev->channel_change_time = 1000; /* TODO: find actual value */ + dev->max_rssi = 127; + + priv->tx_stats.data[0].limit = 5; + dev->queues = 1; + + dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 + + sizeof(struct p54_tx_control_allocdata); + + priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) + + priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL); + + if (!priv->cached_vdcf) { + ieee80211_free_hw(dev); + return NULL; + } + + p54_init_vdcf(dev); + + return dev; +} +EXPORT_SYMBOL_GPL(p54_init_common); + +void p54_free_common(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + kfree(priv->iq_autocal); + kfree(priv->output_limit); + kfree(priv->curve_data); + kfree(priv->cached_vdcf); +} +EXPORT_SYMBOL_GPL(p54_free_common); + +static int __init p54_init(void) +{ + return 0; +} + +static void __exit p54_exit(void) +{ +} + +module_init(p54_init); +module_exit(p54_exit); diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h new file mode 100644 index 0000000..c15b56e --- /dev/null +++ b/drivers/net/wireless/p54/p54common.h @@ -0,0 +1,254 @@ +#ifndef PRISM54COMMON_H +#define PRISM54COMMON_H + +/* + * Common code specific definitions for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +struct bootrec { + __le32 code; + __le32 len; + u32 data[0]; +} __attribute__((packed)); + +struct bootrec_exp_if { + __le16 role; + __le16 if_id; + __le16 variant; + __le16 btm_compat; + __le16 top_compat; +} __attribute__((packed)); + +#define BR_CODE_MIN 0x80000000 +#define BR_CODE_COMPONENT_ID 0x80000001 +#define BR_CODE_COMPONENT_VERSION 0x80000002 +#define BR_CODE_DEPENDENT_IF 0x80000003 +#define BR_CODE_EXPOSED_IF 0x80000004 +#define BR_CODE_DESCR 0x80000101 +#define BR_CODE_MAX 0x8FFFFFFF +#define BR_CODE_END_OF_BRA 0xFF0000FF +#define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF + +#define FW_FMAC 0x464d4143 +#define FW_LM86 0x4c4d3836 +#define FW_LM87 0x4c4d3837 +#define FW_LM20 0x4c4d3230 + +/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */ + +struct pda_entry { + __le16 len; /* includes both code and data */ + __le16 code; + u8 data[0]; +} __attribute__ ((packed)); + +struct eeprom_pda_wrap { + __le32 magic; + __le16 pad; + __le16 len; + __le32 arm_opcode; + u8 data[0]; +} __attribute__ ((packed)); + +struct pda_iq_autocal_entry { + __le16 freq; + __le16 iq_param[4]; +} __attribute__ ((packed)); + +struct pda_channel_output_limit { + __le16 freq; + u8 val_bpsk; + u8 val_qpsk; + u8 val_16qam; + u8 val_64qam; + u8 rate_set_mask; + u8 rate_set_size; +} __attribute__ ((packed)); + +struct pda_pa_curve_data_sample_rev0 { + u8 rf_power; + u8 pa_detector; + u8 pcv; +} __attribute__ ((packed)); + +struct pda_pa_curve_data_sample_rev1 { + u8 rf_power; + u8 pa_detector; + u8 data_barker; + u8 data_bpsk; + u8 data_qpsk; + u8 data_16qam; + u8 data_64qam; + u8 padding; +} __attribute__ ((packed)); + +struct pda_pa_curve_data { + u8 cal_method_rev; + u8 channels; + u8 points_per_channel; + u8 padding; + u8 data[0]; +} __attribute__ ((packed)); + +/* + * this defines the PDR codes used to build PDAs as defined in document + * number 553155. The current implementation mirrors version 1.1 of the + * document and lists only PDRs supported by the ARM platform. + */ + +/* common and choice range (0x0000 - 0x0fff) */ +#define PDR_END 0x0000 +#define PDR_MANUFACTURING_PART_NUMBER 0x0001 +#define PDR_PDA_VERSION 0x0002 +#define PDR_NIC_SERIAL_NUMBER 0x0003 + +#define PDR_MAC_ADDRESS 0x0101 +#define PDR_REGULATORY_DOMAIN_LIST 0x0103 +#define PDR_TEMPERATURE_TYPE 0x0107 + +#define PDR_PRISM_PCI_IDENTIFIER 0x0402 + +/* ARM range (0x1000 - 0x1fff) */ +#define PDR_COUNTRY_INFORMATION 0x1000 +#define PDR_INTERFACE_LIST 0x1001 +#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002 +#define PDR_OEM_NAME 0x1003 +#define PDR_PRODUCT_NAME 0x1004 +#define PDR_UTF8_OEM_NAME 0x1005 +#define PDR_UTF8_PRODUCT_NAME 0x1006 +#define PDR_COUNTRY_LIST 0x1007 +#define PDR_DEFAULT_COUNTRY 0x1008 + +#define PDR_ANTENNA_GAIN 0x1100 + +#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901 +#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902 +#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903 +#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904 +#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905 +#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906 +#define PDR_REGULATORY_POWER_LIMITS 0x1907 +#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908 +#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909 +#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a + +/* reserved range (0x2000 - 0x7fff) */ + +/* customer range (0x8000 - 0xffff) */ +#define PDR_BASEBAND_REGISTERS 0x8000 +#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001 + +/* stored in skb->cb */ +struct memrecord { + u32 start_addr; + u32 end_addr; + struct ieee80211_tx_control *control; +}; + +struct p54_eeprom_lm86 { + __le16 offset; + __le16 len; + u8 data[0]; +} __attribute__ ((packed)); + +struct p54_rx_hdr { + __le16 magic; + __le16 len; + __le16 freq; + u8 antenna; + u8 rate; + u8 rssi; + u8 quality; + u16 unknown2; + __le64 timestamp; + u8 data[0]; +} __attribute__ ((packed)); + +struct p54_frame_sent_hdr { + u8 status; + u8 retries; + __le16 ack_rssi; + __le16 seq; + u16 rate; +} __attribute__ ((packed)); + +struct p54_tx_control_allocdata { + u8 rateset[8]; + u16 padding; + u8 wep_key_present; + u8 wep_key_len; + u8 wep_key[16]; + __le32 frame_type; + u32 padding2; + __le16 magic4; + u8 antenna; + u8 output_power; + __le32 magic5; + u8 align[0]; +} __attribute__ ((packed)); + +struct p54_tx_control_filter { + __le16 filter_type; + u8 dst[ETH_ALEN]; + u8 src[ETH_ALEN]; + u8 antenna; + u8 debug; + __le32 magic3; + u8 rates[8]; // FIXME: what's this for? + __le32 rx_addr; + __le16 max_rx; + __le16 rxhw; + __le16 magic8; + __le16 magic9; +} __attribute__ ((packed)); + +struct p54_tx_control_channel { + __le16 magic1; + __le16 magic2; + u8 padding1[20]; + struct pda_iq_autocal_entry iq_autocal; + u8 pa_points_per_curve; + u8 val_barker; + u8 val_bpsk; + u8 val_qpsk; + u8 val_16qam; + u8 val_64qam; + struct pda_pa_curve_data_sample_rev1 curve_data[0]; + /* additional padding/data after curve_data */ +} __attribute__ ((packed)); + +struct p54_tx_control_led { + __le16 mode; + __le16 led_temporary; + __le16 led_permanent; + __le16 duration; +} __attribute__ ((packed)); + +struct p54_tx_vdcf_queues { + __le16 aifs; + __le16 cwmin; + __le16 cwmax; + __le16 txop; +} __attribute__ ((packed)); + +struct p54_tx_control_vdcf { + u8 padding; + u8 slottime; + u8 magic1; + u8 magic2; + struct p54_tx_vdcf_queues queue[8]; + u8 pad2[4]; + __le16 frameburst; +} __attribute__ ((packed)); + +#endif /* PRISM54COMMON_H */ diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c new file mode 100644 index 0000000..fa52772 --- /dev/null +++ b/drivers/net/wireless/p54/p54pci.c @@ -0,0 +1,697 @@ + +/* + * Linux device driver for PCI based Prism54 + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jean-baptiste.note@m4x.org>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <net/mac80211.h> + +#include "p54.h" +#include "p54pci.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_DESCRIPTION("Prism54 PCI wireless driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54pci"); + +static struct pci_device_id p54p_table[] __devinitdata = { + /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ + { PCI_DEVICE(0x1260, 0x3890) }, + /* 3COM 3CRWE154G72 Wireless LAN adapter */ + { PCI_DEVICE(0x10b7, 0x6001) }, + /* Intersil PRISM Indigo Wireless LAN adapter */ + { PCI_DEVICE(0x1260, 0x3877) }, + /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ + { PCI_DEVICE(0x1260, 0x3886) }, + { }, +}; + +MODULE_DEVICE_TABLE(pci, p54p_table); + +static int p54p_upload_firmware(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + const struct firmware *fw_entry = NULL; + __le32 reg; + int err; + __le32 *data; + u32 remains, left, device_addr; + + P54P_WRITE(int_enable, cpu_to_le32(0)); + P54P_READ(int_enable); + udelay(10); + + reg = P54P_READ(ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); + P54P_WRITE(ctrl_stat, reg); + P54P_READ(ctrl_stat); + udelay(10); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + udelay(10); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + + mdelay(50); + + err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev); + if (err) { + printk(KERN_ERR "%s (prism54pci): cannot find firmware " + "(isl3886)\n", pci_name(priv->pdev)); + return err; + } + + p54_parse_firmware(dev, fw_entry); + + data = (__le32 *) fw_entry->data; + remains = fw_entry->size; + device_addr = ISL38XX_DEV_FIRMWARE_ADDR; + while (remains) { + u32 i = 0; + left = min((u32)0x1000, remains); + P54P_WRITE(direct_mem_base, cpu_to_le32(device_addr)); + P54P_READ(int_enable); + + device_addr += 0x1000; + while (i < left) { + P54P_WRITE(direct_mem_win[i], *data++); + i += sizeof(u32); + } + + remains -= left; + P54P_READ(int_enable); + } + + release_firmware(fw_entry); + + reg = P54P_READ(ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); + P54P_WRITE(ctrl_stat, reg); + P54P_READ(ctrl_stat); + udelay(10); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + udelay(10); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54P_WRITE(ctrl_stat, reg); + wmb(); + udelay(10); + + return 0; +} + +static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id) +{ + struct p54p_priv *priv = (struct p54p_priv *) dev_id; + __le32 reg; + + reg = P54P_READ(int_ident); + P54P_WRITE(int_ack, reg); + + if (reg & P54P_READ(int_enable)) + complete(&priv->boot_comp); + + return IRQ_HANDLED; +} + +static int p54p_read_eeprom(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + int err; + struct p54_control_hdr *hdr; + void *eeprom; + dma_addr_t rx_mapping, tx_mapping; + u16 alen; + + init_completion(&priv->boot_comp); + err = request_irq(priv->pdev->irq, &p54p_simple_interrupt, + IRQF_SHARED, "prism54pci", priv); + if (err) { + printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n", + pci_name(priv->pdev)); + return err; + } + + eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL); + if (!eeprom) { + printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n", + pci_name(priv->pdev)); + err = -ENOMEM; + goto out; + } + + memset(ring_control, 0, sizeof(*ring_control)); + P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); + P54P_READ(ring_control_base); + udelay(10); + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + P54P_READ(int_enable); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + + if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { + printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n", + pci_name(priv->pdev)); + err = -EINVAL; + goto out; + } + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); + P54P_READ(int_enable); + + hdr = eeprom + 0x2010; + p54_fill_eeprom_readback(hdr); + hdr->req_id = cpu_to_le32(priv->common.rx_start); + + rx_mapping = pci_map_single(priv->pdev, eeprom, + 0x2010, PCI_DMA_FROMDEVICE); + tx_mapping = pci_map_single(priv->pdev, (void *)hdr, + EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); + + ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping); + ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010); + ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping); + ring_control->tx_data[0].device_addr = hdr->req_id; + ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN); + + ring_control->host_idx[2] = cpu_to_le32(1); + ring_control->host_idx[1] = cpu_to_le32(1); + + wmb(); + mdelay(100); + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + + wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); + wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); + + pci_unmap_single(priv->pdev, tx_mapping, + EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); + pci_unmap_single(priv->pdev, rx_mapping, + 0x2010, PCI_DMA_FROMDEVICE); + + alen = le16_to_cpu(ring_control->rx_mgmt[0].len); + if (le32_to_cpu(ring_control->device_idx[2]) != 1 || + alen < 0x10) { + printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n", + pci_name(priv->pdev)); + err = -EINVAL; + goto out; + } + + p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10); + + out: + kfree(eeprom); + P54P_WRITE(int_enable, cpu_to_le32(0)); + P54P_READ(int_enable); + udelay(10); + free_irq(priv->pdev->irq, priv); + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + return err; +} + +static void p54p_refill_rx_ring(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + u32 limit, host_idx, idx; + + host_idx = le32_to_cpu(ring_control->host_idx[0]); + limit = host_idx; + limit -= le32_to_cpu(ring_control->device_idx[0]); + limit = ARRAY_SIZE(ring_control->rx_data) - limit; + + idx = host_idx % ARRAY_SIZE(ring_control->rx_data); + while (limit-- > 1) { + struct p54p_desc *desc = &ring_control->rx_data[idx]; + + if (!desc->host_addr) { + struct sk_buff *skb; + dma_addr_t mapping; + skb = dev_alloc_skb(MAX_RX_SIZE); + if (!skb) + break; + + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(skb), + MAX_RX_SIZE, + PCI_DMA_FROMDEVICE); + desc->host_addr = cpu_to_le32(mapping); + desc->device_addr = 0; // FIXME: necessary? + desc->len = cpu_to_le16(MAX_RX_SIZE); + desc->flags = 0; + priv->rx_buf[idx] = skb; + } + + idx++; + host_idx++; + idx %= ARRAY_SIZE(ring_control->rx_data); + } + + wmb(); + ring_control->host_idx[0] = cpu_to_le32(host_idx); +} + +static irqreturn_t p54p_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + __le32 reg; + + spin_lock(&priv->lock); + reg = P54P_READ(int_ident); + if (unlikely(reg == cpu_to_le32(0xFFFFFFFF))) { + spin_unlock(&priv->lock); + return IRQ_HANDLED; + } + + P54P_WRITE(int_ack, reg); + + reg &= P54P_READ(int_enable); + + if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) { + struct p54p_desc *desc; + u32 idx, i; + i = priv->tx_idx; + i %= ARRAY_SIZE(ring_control->tx_data); + priv->tx_idx = idx = le32_to_cpu(ring_control->device_idx[1]); + idx %= ARRAY_SIZE(ring_control->tx_data); + + while (i != idx) { + desc = &ring_control->tx_data[i]; + if (priv->tx_buf[i]) { + kfree(priv->tx_buf[i]); + priv->tx_buf[i] = NULL; + } + + pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), PCI_DMA_TODEVICE); + + desc->host_addr = 0; + desc->device_addr = 0; + desc->len = 0; + desc->flags = 0; + + i++; + i %= ARRAY_SIZE(ring_control->tx_data); + } + + i = priv->rx_idx; + i %= ARRAY_SIZE(ring_control->rx_data); + priv->rx_idx = idx = le32_to_cpu(ring_control->device_idx[0]); + idx %= ARRAY_SIZE(ring_control->rx_data); + while (i != idx) { + u16 len; + struct sk_buff *skb; + desc = &ring_control->rx_data[i]; + len = le16_to_cpu(desc->len); + skb = priv->rx_buf[i]; + + skb_put(skb, len); + + if (p54_rx(dev, skb)) { + pci_unmap_single(priv->pdev, + le32_to_cpu(desc->host_addr), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + + priv->rx_buf[i] = NULL; + desc->host_addr = 0; + } else { + skb_trim(skb, 0); + desc->len = cpu_to_le16(MAX_RX_SIZE); + } + + i++; + i %= ARRAY_SIZE(ring_control->rx_data); + } + + p54p_refill_rx_ring(dev); + + wmb(); + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + } else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT)) + complete(&priv->boot_comp); + + spin_unlock(&priv->lock); + + return reg ? IRQ_HANDLED : IRQ_NONE; +} + +static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + unsigned long flags; + struct p54p_desc *desc; + dma_addr_t mapping; + u32 device_idx, idx, i; + + spin_lock_irqsave(&priv->lock, flags); + + device_idx = le32_to_cpu(ring_control->device_idx[1]); + idx = le32_to_cpu(ring_control->host_idx[1]); + i = idx % ARRAY_SIZE(ring_control->tx_data); + + mapping = pci_map_single(priv->pdev, data, len, PCI_DMA_TODEVICE); + desc = &ring_control->tx_data[i]; + desc->host_addr = cpu_to_le32(mapping); + desc->device_addr = data->req_id; + desc->len = cpu_to_le16(len); + desc->flags = 0; + + wmb(); + ring_control->host_idx[1] = cpu_to_le32(idx + 1); + + if (free_on_tx) + priv->tx_buf[i] = data; + + spin_unlock_irqrestore(&priv->lock, flags); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + P54P_READ(dev_int); + + /* FIXME: unlikely to happen because the device usually runs out of + memory before we fill the ring up, but we can make it impossible */ + if (idx - device_idx > ARRAY_SIZE(ring_control->tx_data) - 2) + printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy)); +} + +static int p54p_open(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + int err; + + init_completion(&priv->boot_comp); + err = request_irq(priv->pdev->irq, &p54p_interrupt, + IRQF_SHARED, "prism54pci", dev); + if (err) { + printk(KERN_ERR "%s: failed to register IRQ handler\n", + wiphy_name(dev->wiphy)); + return err; + } + + memset(priv->ring_control, 0, sizeof(*priv->ring_control)); + priv->rx_idx = priv->tx_idx = 0; + p54p_refill_rx_ring(dev); + + p54p_upload_firmware(dev); + + P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); + P54P_READ(ring_control_base); + wmb(); + udelay(10); + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + P54P_READ(dev_int); + + if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { + printk(KERN_ERR "%s: Cannot boot firmware!\n", + wiphy_name(dev->wiphy)); + free_irq(priv->pdev->irq, dev); + return -ETIMEDOUT; + } + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + P54P_READ(dev_int); + wmb(); + udelay(10); + + return 0; +} + +static void p54p_stop(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + struct p54p_ring_control *ring_control = priv->ring_control; + unsigned int i; + struct p54p_desc *desc; + + P54P_WRITE(int_enable, cpu_to_le32(0)); + P54P_READ(int_enable); + udelay(10); + + free_irq(priv->pdev->irq, dev); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + + for (i = 0; i < ARRAY_SIZE(priv->rx_buf); i++) { + desc = &ring_control->rx_data[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + kfree_skb(priv->rx_buf[i]); + priv->rx_buf[i] = NULL; + } + + for (i = 0; i < ARRAY_SIZE(priv->tx_buf); i++) { + desc = &ring_control->tx_data[i]; + if (desc->host_addr) + pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), + le16_to_cpu(desc->len), PCI_DMA_TODEVICE); + + kfree(priv->tx_buf[i]); + priv->tx_buf[i] = NULL; + } + + memset(ring_control, 0, sizeof(ring_control)); +} + +static int __devinit p54p_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct p54p_priv *priv; + struct ieee80211_hw *dev; + unsigned long mem_addr, mem_len; + int err; + DECLARE_MAC_BUF(mac); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n", + pci_name(pdev)); + return err; + } + + mem_addr = pci_resource_start(pdev, 0); + mem_len = pci_resource_len(pdev, 0); + if (mem_len < sizeof(struct p54p_csr)) { + printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n", + pci_name(pdev)); + pci_disable_device(pdev); + return err; + } + + err = pci_request_regions(pdev, "prism54pci"); + if (err) { + printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n", + pci_name(pdev)); + return err; + } + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || + pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { + printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n", + pci_name(pdev)); + goto err_free_reg; + } + + pci_set_master(pdev); + pci_try_set_mwi(pdev); + + pci_write_config_byte(pdev, 0x40, 0); + pci_write_config_byte(pdev, 0x41, 0); + + dev = p54_init_common(sizeof(*priv)); + if (!dev) { + printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + priv = dev->priv; + priv->pdev = pdev; + + SET_IEEE80211_DEV(dev, &pdev->dev); + pci_set_drvdata(pdev, dev); + + priv->map = ioremap(mem_addr, mem_len); + if (!priv->map) { + printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n", + pci_name(pdev)); + err = -EINVAL; // TODO: use a better error code? + goto err_free_dev; + } + + priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control), + &priv->ring_control_dma); + if (!priv->ring_control) { + printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_iounmap; + } + memset(priv->ring_control, 0, sizeof(*priv->ring_control)); + + err = p54p_upload_firmware(dev); + if (err) + goto err_free_desc; + + err = p54p_read_eeprom(dev); + if (err) + goto err_free_desc; + + priv->common.open = p54p_open; + priv->common.stop = p54p_stop; + priv->common.tx = p54p_tx; + + spin_lock_init(&priv->lock); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n", + pci_name(pdev)); + goto err_free_common; + } + + printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", + wiphy_name(dev->wiphy), + print_mac(mac, dev->wiphy->perm_addr), + priv->common.version); + + return 0; + + err_free_common: + p54_free_common(dev); + + err_free_desc: + pci_free_consistent(pdev, sizeof(*priv->ring_control), + priv->ring_control, priv->ring_control_dma); + + err_iounmap: + iounmap(priv->map); + + err_free_dev: + pci_set_drvdata(pdev, NULL); + ieee80211_free_hw(dev); + + err_free_reg: + pci_release_regions(pdev); + pci_disable_device(pdev); + return err; +} + +static void __devexit p54p_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct p54p_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + priv = dev->priv; + pci_free_consistent(pdev, sizeof(*priv->ring_control), + priv->ring_control, priv->ring_control_dma); + p54_free_common(dev); + iounmap(priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + ieee80211_free_hw(dev); +} + +#ifdef CONFIG_PM +static int p54p_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct p54p_priv *priv = dev->priv; + + if (priv->common.mode != IEEE80211_IF_TYPE_INVALID) { + ieee80211_stop_queues(dev); + p54p_stop(dev); + } + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int p54p_resume(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct p54p_priv *priv = dev->priv; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (priv->common.mode != IEEE80211_IF_TYPE_INVALID) { + p54p_open(dev); + ieee80211_start_queues(dev); + } + + return 0; +} +#endif /* CONFIG_PM */ + +static struct pci_driver p54p_driver = { + .name = "prism54pci", + .id_table = p54p_table, + .probe = p54p_probe, + .remove = __devexit_p(p54p_remove), +#ifdef CONFIG_PM + .suspend = p54p_suspend, + .resume = p54p_resume, +#endif /* CONFIG_PM */ +}; + +static int __init p54p_init(void) +{ + return pci_register_driver(&p54p_driver); +} + +static void __exit p54p_exit(void) +{ + pci_unregister_driver(&p54p_driver); +} + +module_init(p54p_init); +module_exit(p54p_exit); diff --git a/drivers/net/wireless/p54/p54pci.h b/drivers/net/wireless/p54/p54pci.h new file mode 100644 index 0000000..5bedd7a --- /dev/null +++ b/drivers/net/wireless/p54/p54pci.h @@ -0,0 +1,106 @@ +#ifndef PRISM54PCI_H +#define PRISM54PCI_H + +/* + * Defines for PCI based mac80211 Prism54 driver + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Device Interrupt register bits */ +#define ISL38XX_DEV_INT_RESET 0x0001 +#define ISL38XX_DEV_INT_UPDATE 0x0002 +#define ISL38XX_DEV_INT_WAKEUP 0x0008 +#define ISL38XX_DEV_INT_SLEEP 0x0010 +#define ISL38XX_DEV_INT_ABORT 0x0020 +/* these two only used in USB */ +#define ISL38XX_DEV_INT_DATA 0x0040 +#define ISL38XX_DEV_INT_MGMT 0x0080 + +#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000 +#define ISL38XX_DEV_INT_PCIUART_DR 0x8000 + +/* Interrupt Identification/Acknowledge/Enable register bits */ +#define ISL38XX_INT_IDENT_UPDATE 0x0002 +#define ISL38XX_INT_IDENT_INIT 0x0004 +#define ISL38XX_INT_IDENT_WAKEUP 0x0008 +#define ISL38XX_INT_IDENT_SLEEP 0x0010 +#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000 +#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000 + +/* Control/Status register bits */ +#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 +#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 +#define ISL38XX_CTRL_STAT_RESET 0x10000000 +#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 +#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 +#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 + +struct p54p_csr { + __le32 dev_int; + u8 unused_1[12]; + __le32 int_ident; + __le32 int_ack; + __le32 int_enable; + u8 unused_2[4]; + union { + __le32 ring_control_base; + __le32 gen_purp_com[2]; + }; + u8 unused_3[8]; + __le32 direct_mem_base; + u8 unused_4[44]; + __le32 dma_addr; + __le32 dma_len; + __le32 dma_ctrl; + u8 unused_5[12]; + __le32 ctrl_stat; + u8 unused_6[1924]; + u8 cardbus_cis[0x800]; + u8 direct_mem_win[0x1000]; +} __attribute__ ((packed)); + +/* usb backend only needs the register defines above */ +#ifndef PRISM54USB_H +struct p54p_desc { + __le32 host_addr; + __le32 device_addr; + __le16 len; + __le16 flags; +} __attribute__ ((packed)); + +struct p54p_ring_control { + __le32 host_idx[4]; + __le32 device_idx[4]; + struct p54p_desc rx_data[8]; + struct p54p_desc tx_data[32]; + struct p54p_desc rx_mgmt[4]; + struct p54p_desc tx_mgmt[4]; +} __attribute__ ((packed)); + +#define P54P_READ(r) (__force __le32)__raw_readl(&priv->map->r) +#define P54P_WRITE(r, val) __raw_writel((__force u32)(__le32)(val), &priv->map->r) + +struct p54p_priv { + struct p54_common common; + struct pci_dev *pdev; + struct p54p_csr __iomem *map; + + spinlock_t lock; + struct p54p_ring_control *ring_control; + dma_addr_t ring_control_dma; + u32 rx_idx, tx_idx; + struct sk_buff *rx_buf[8]; + void *tx_buf[32]; + struct completion boot_comp; +}; + +#endif /* PRISM54USB_H */ +#endif /* PRISM54PCI_H */ diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c new file mode 100644 index 0000000..98ddbb3 --- /dev/null +++ b/drivers/net/wireless/p54/p54usb.c @@ -0,0 +1,910 @@ + +/* + * Linux device driver for USB based Prism54 + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/usb.h> +#include <linux/pci.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <net/mac80211.h> + +#include "p54.h" +#include "p54usb.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_DESCRIPTION("Prism54 USB wireless driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54usb"); + +static struct usb_device_id p54u_table[] __devinitdata = { + /* Version 1 devices (pci chip + net2280) */ + {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ + {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */ + {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */ + {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */ + {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */ + {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */ + {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */ + {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ + {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ + {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ + {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ + {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ + {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ + {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */ + {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */ + {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ + + /* Version 2 devices (3887) */ + {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ + {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */ + {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */ + {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */ + {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */ + {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/ + {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/ + {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */ + {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */ + {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */ + {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ + {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */ + {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ + {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ + {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ + {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ + {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ + {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ + {} +}; + +MODULE_DEVICE_TABLE(usb, p54u_table); + +static void p54u_rx_cb(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *) urb->context; + struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb; + struct ieee80211_hw *dev = info->dev; + struct p54u_priv *priv = dev->priv; + + if (unlikely(urb->status)) { + info->urb = NULL; + usb_free_urb(urb); + return; + } + + skb_unlink(skb, &priv->rx_queue); + skb_put(skb, urb->actual_length); + if (!priv->hw_type) + skb_pull(skb, sizeof(struct net2280_tx_hdr)); + + if (p54_rx(dev, skb)) { + skb = dev_alloc_skb(MAX_RX_SIZE); + if (unlikely(!skb)) { + usb_free_urb(urb); + /* TODO check rx queue length and refill *somewhere* */ + return; + } + + info = (struct p54u_rx_info *) skb->cb; + info->urb = urb; + info->dev = dev; + urb->transfer_buffer = skb_tail_pointer(skb); + urb->context = skb; + skb_queue_tail(&priv->rx_queue, skb); + } else { + skb_trim(skb, 0); + skb_queue_tail(&priv->rx_queue, skb); + } + + usb_submit_urb(urb, GFP_ATOMIC); +} + +static void p54u_tx_cb(struct urb *urb) +{ + usb_free_urb(urb); +} + +static void p54u_tx_free_cb(struct urb *urb) +{ + kfree(urb->transfer_buffer); + usb_free_urb(urb); +} + +static int p54u_init_urbs(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + struct urb *entry; + struct sk_buff *skb; + struct p54u_rx_info *info; + + while (skb_queue_len(&priv->rx_queue) < 32) { + skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL); + if (!skb) + break; + entry = usb_alloc_urb(0, GFP_KERNEL); + if (!entry) { + kfree_skb(skb); + break; + } + usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb); + info = (struct p54u_rx_info *) skb->cb; + info->urb = entry; + info->dev = dev; + skb_queue_tail(&priv->rx_queue, skb); + usb_submit_urb(entry, GFP_KERNEL); + } + + return 0; +} + +static void p54u_free_urbs(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + struct p54u_rx_info *info; + struct sk_buff *skb; + + while ((skb = skb_dequeue(&priv->rx_queue))) { + info = (struct p54u_rx_info *) skb->cb; + if (!info->urb) + continue; + + usb_kill_urb(info->urb); + kfree_skb(skb); + } +} + +static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54u_priv *priv = dev->priv; + struct urb *addr_urb, *data_urb; + + addr_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!addr_urb) + return; + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) { + usb_free_urb(addr_urb); + return; + } + + usb_fill_bulk_urb(addr_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), &data->req_id, + sizeof(data->req_id), p54u_tx_cb, dev); + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), data, len, + free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev); + + usb_submit_urb(addr_urb, GFP_ATOMIC); + usb_submit_urb(data_urb, GFP_ATOMIC); +} + +static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data, + size_t len, int free_on_tx) +{ + struct p54u_priv *priv = dev->priv; + struct urb *int_urb, *data_urb; + struct net2280_tx_hdr *hdr; + struct net2280_reg_write *reg; + + reg = kmalloc(sizeof(*reg), GFP_ATOMIC); + if (!reg) + return; + + int_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!int_urb) { + kfree(reg); + return; + } + + data_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!data_urb) { + kfree(reg); + usb_free_urb(int_urb); + return; + } + + reg->port = cpu_to_le16(NET2280_DEV_U32); + reg->addr = cpu_to_le32(P54U_DEV_BASE); + reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); + + len += sizeof(*data); + hdr = (void *)data - sizeof(*hdr); + memset(hdr, 0, sizeof(*hdr)); + hdr->device_addr = data->req_id; + hdr->len = cpu_to_le16(len); + + usb_fill_bulk_urb(int_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), + p54u_tx_free_cb, dev); + usb_submit_urb(int_urb, GFP_ATOMIC); + + usb_fill_bulk_urb(data_urb, priv->udev, + usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, len + sizeof(*hdr), + free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev); + usb_submit_urb(data_urb, GFP_ATOMIC); +} + +static int p54u_write(struct p54u_priv *priv, + struct net2280_reg_write *buf, + enum net2280_op_type type, + __le32 addr, __le32 val) +{ + unsigned int ep; + int alen; + + if (type & 0x0800) + ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV); + else + ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG); + + buf->port = cpu_to_le16(type); + buf->addr = addr; + buf->val = val; + + return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000); +} + +static int p54u_read(struct p54u_priv *priv, void *buf, + enum net2280_op_type type, + __le32 addr, __le32 *val) +{ + struct net2280_reg_read *read = buf; + __le32 *reg = buf; + unsigned int ep; + int alen, err; + + if (type & 0x0800) + ep = P54U_PIPE_DEV; + else + ep = P54U_PIPE_BRG; + + read->port = cpu_to_le16(type); + read->addr = addr; + + err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), + read, sizeof(*read), &alen, 1000); + if (err) + return err; + + err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep), + reg, sizeof(*reg), &alen, 1000); + if (err) + return err; + + *val = *reg; + return 0; +} + +static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep, + void *data, size_t len) +{ + int alen; + return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep), + data, len, &alen, 2000); +} + +static int p54u_read_eeprom(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + void *buf; + struct p54_control_hdr *hdr; + int err, alen; + size_t offset = priv->hw_type ? 0x10 : 0x20; + + buf = kmalloc(0x2020, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "prism54usb: cannot allocate memory for " + "eeprom readback!\n"); + return -ENOMEM; + } + + if (priv->hw_type) { + *((u32 *) buf) = priv->common.rx_start; + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); + if (err) { + printk(KERN_ERR "prism54usb: addr send failed\n"); + goto fail; + } + } else { + struct net2280_reg_write *reg = buf; + reg->port = cpu_to_le16(NET2280_DEV_U32); + reg->addr = cpu_to_le32(P54U_DEV_BASE); + reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); + err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg)); + if (err) { + printk(KERN_ERR "prism54usb: dev_int send failed\n"); + goto fail; + } + } + + hdr = buf + priv->common.tx_hdr_len; + p54_fill_eeprom_readback(hdr); + hdr->req_id = cpu_to_le32(priv->common.rx_start); + if (priv->common.tx_hdr_len) { + struct net2280_tx_hdr *tx_hdr = buf; + tx_hdr->device_addr = hdr->req_id; + tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN); + } + + /* we can just pretend to send 0x2000 bytes of nothing in the headers */ + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, + EEPROM_READBACK_LEN + priv->common.tx_hdr_len); + if (err) { + printk(KERN_ERR "prism54usb: eeprom req send failed\n"); + goto fail; + } + + err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), + buf, 0x2020, &alen, 1000); + if (!err && alen > offset) { + p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset); + } else { + printk(KERN_ERR "prism54usb: eeprom read failed!\n"); + err = -EINVAL; + goto fail; + } + + fail: + kfree(buf); + return err; +} + +static int p54u_upload_firmware_3887(struct ieee80211_hw *dev) +{ + static char start_string[] = "~~~~<\r"; + struct p54u_priv *priv = dev->priv; + const struct firmware *fw_entry = NULL; + int err, alen; + u8 carry = 0; + u8 *buf, *tmp, *data; + unsigned int left, remains, block_size; + struct x2_header *hdr; + unsigned long timeout; + + tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "p54usb: cannot allocate firmware upload buffer!\n"); + err = -ENOMEM; + goto err_bufalloc; + } + + memcpy(buf, start_string, 4); + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 4); + if (err) { + printk(KERN_ERR "p54usb: reset failed! (%d)\n", err); + goto err_reset; + } + + err = request_firmware(&fw_entry, "isl3887usb_bare", &priv->udev->dev); + if (err) { + printk(KERN_ERR "p54usb: cannot find firmware (isl3887usb_bare)!\n"); + goto err_req_fw_failed; + } + + p54_parse_firmware(dev, fw_entry); + + left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size); + strcpy(buf, start_string); + left -= strlen(start_string); + tmp += strlen(start_string); + + data = fw_entry->data; + remains = fw_entry->size; + + hdr = (struct x2_header *)(buf + strlen(start_string)); + memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE); + hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR); + hdr->fw_length = cpu_to_le32(fw_entry->size); + hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr, + sizeof(u32)*2)); + left -= sizeof(*hdr); + tmp += sizeof(*hdr); + + while (remains) { + while (left--) { + if (carry) { + *tmp++ = carry; + carry = 0; + remains--; + continue; + } + switch (*data) { + case '~': + *tmp++ = '}'; + carry = '^'; + break; + case '}': + *tmp++ = '}'; + carry = ']'; + break; + default: + *tmp++ = *data; + remains--; + break; + } + data++; + } + + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size); + if (err) { + printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + goto err_upload_failed; + } + + tmp = buf; + left = block_size = min((unsigned int)P54U_FW_BLOCK, remains); + } + + *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size)); + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32)); + if (err) { + printk(KERN_ERR "prism54usb: firmware upload failed!\n"); + goto err_upload_failed; + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { + if (alen > 2 && !memcmp(buf, "OK", 2)) + break; + + if (alen > 5 && !memcmp(buf, "ERROR", 5)) { + printk(KERN_INFO "prism54usb: firmware upload failed!\n"); + err = -EINVAL; + break; + } + + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "prism54usb: firmware boot timed out!\n"); + err = -ETIMEDOUT; + break; + } + } + if (err) + goto err_upload_failed; + + buf[0] = 'g'; + buf[1] = '\r'; + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2); + if (err) { + printk(KERN_ERR "prism54usb: firmware boot failed!\n"); + goto err_upload_failed; + } + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(err = usb_bulk_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) { + if (alen > 0 && buf[0] == 'g') + break; + + if (time_after(jiffies, timeout)) { + err = -ETIMEDOUT; + break; + } + } + if (err) + goto err_upload_failed; + + err_upload_failed: + release_firmware(fw_entry); + err_req_fw_failed: + err_reset: + kfree(buf); + err_bufalloc: + return err; +} + +static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + const struct firmware *fw_entry = NULL; + const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE; + int err, alen; + void *buf; + __le32 reg; + unsigned int remains, offset; + u8 *data; + + buf = kmalloc(512, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "p54usb: firmware buffer alloc failed!\n"); + return -ENOMEM; + } + + err = request_firmware(&fw_entry, "isl3890usb", &priv->udev->dev); + if (err) { + printk(KERN_ERR "p54usb: cannot find firmware (isl3890usb)!\n"); + kfree(buf); + return err; + } + + p54_parse_firmware(dev, fw_entry); + +#define P54U_WRITE(type, addr, data) \ + do {\ + err = p54u_write(priv, buf, type,\ + cpu_to_le32((u32)(unsigned long)addr), data);\ + if (err) \ + goto fail;\ + } while (0) + +#define P54U_READ(type, addr) \ + do {\ + err = p54u_read(priv, buf, type,\ + cpu_to_le32((u32)(unsigned long)addr), ®);\ + if (err)\ + goto fail;\ + } while (0) + + /* power down net2280 bridge */ + P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL); + reg |= cpu_to_le32(P54U_BRG_POWER_DOWN); + reg &= cpu_to_le32(~P54U_BRG_POWER_UP); + P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); + + mdelay(100); + + /* power up bridge */ + reg |= cpu_to_le32(P54U_BRG_POWER_UP); + reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN); + P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg); + + mdelay(100); + + P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT, + cpu_to_le32(NET2280_CLK_30Mhz | + NET2280_PCI_ENABLE | + NET2280_PCI_SOFT_RESET)); + + mdelay(20); + + P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND, + cpu_to_le32(PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER)); + + P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0, + cpu_to_le32(NET2280_BASE)); + + P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS); + reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT); + P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg); + + // TODO: we really need this? + P54U_READ(NET2280_BRG_U32, NET2280_RELNUM); + + P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP, + cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); + P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP, + cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE)); + + P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2, + cpu_to_le32(NET2280_BASE2)); + + /* finally done setting up the bridge */ + + P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND, + cpu_to_le32(PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER)); + + P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0); + P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0, + cpu_to_le32(P54U_DEV_BASE)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + + /* do romboot */ + P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0); + + P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(100); + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + /* finally, we can upload firmware now! */ + remains = fw_entry->size; + data = fw_entry->data; + offset = ISL38XX_DEV_FIRMWARE_ADDR; + + while (remains) { + unsigned int block_len = min(remains, (unsigned int)512); + memcpy(buf, data, block_len); + + err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len); + if (err) { + printk(KERN_ERR "prism54usb: firmware block upload " + "failed\n"); + goto fail; + } + + P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base, + cpu_to_le32(0xc0000f00)); + + P54U_WRITE(NET2280_DEV_U32, + 0x0020 | (unsigned long)&devreg->direct_mem_win, 0); + P54U_WRITE(NET2280_DEV_U32, + 0x0020 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(1)); + + P54U_WRITE(NET2280_DEV_U32, + 0x0024 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(block_len)); + P54U_WRITE(NET2280_DEV_U32, + 0x0028 | (unsigned long)&devreg->direct_mem_win, + cpu_to_le32(offset)); + + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr, + cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR)); + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len, + cpu_to_le32(block_len >> 2)); + P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl, + cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER)); + + mdelay(10); + + P54U_READ(NET2280_DEV_U32, + 0x002C | (unsigned long)&devreg->direct_mem_win); + if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) || + !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) { + printk(KERN_ERR "prism54usb: firmware DMA transfer " + "failed\n"); + goto fail; + } + + P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT, + cpu_to_le32(NET2280_FIFO_FLUSH)); + + remains -= block_len; + data += block_len; + offset += block_len; + } + + /* do ramboot */ + P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(20); + + reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); + P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg); + + mdelay(100); + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + /* start up the firmware */ + P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, + cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE | + NET2280_USB_INTERRUPT_ENABLE)); + + P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int, + cpu_to_le32(ISL38XX_DEV_INT_RESET)); + + err = usb_interrupt_msg(priv->udev, + usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT), + buf, sizeof(__le32), &alen, 1000); + if (err || alen != sizeof(__le32)) + goto fail; + + P54U_READ(NET2280_DEV_U32, &devreg->int_ident); + P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg); + + if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))) + err = -EINVAL; + + P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0); + P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1, + cpu_to_le32(NET2280_PCI_INTA_INTERRUPT)); + +#undef P54U_WRITE +#undef P54U_READ + + fail: + release_firmware(fw_entry); + kfree(buf); + return err; +} + +static int p54u_open(struct ieee80211_hw *dev) +{ + struct p54u_priv *priv = dev->priv; + int err; + + err = p54u_init_urbs(dev); + if (err) { + return err; + } + + priv->common.open = p54u_init_urbs; + + return 0; +} + +static void p54u_stop(struct ieee80211_hw *dev) +{ + /* TODO: figure out how to reliably stop the 3887 and net2280 so + the hardware is still usable next time we want to start it. + until then, we just stop listening to the hardware.. */ + p54u_free_urbs(dev); + return; +} + +static int __devinit p54u_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct ieee80211_hw *dev; + struct p54u_priv *priv; + int err; + unsigned int i, recognized_pipes; + DECLARE_MAC_BUF(mac); + + dev = p54_init_common(sizeof(*priv)); + if (!dev) { + printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n"); + return -ENOMEM; + } + + priv = dev->priv; + + SET_IEEE80211_DEV(dev, &intf->dev); + usb_set_intfdata(intf, dev); + priv->udev = udev; + + usb_get_dev(udev); + + /* really lazy and simple way of figuring out if we're a 3887 */ + /* TODO: should just stick the identification in the device table */ + i = intf->altsetting->desc.bNumEndpoints; + recognized_pipes = 0; + while (i--) { + switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) { + case P54U_PIPE_DATA: + case P54U_PIPE_MGMT: + case P54U_PIPE_BRG: + case P54U_PIPE_DEV: + case P54U_PIPE_DATA | USB_DIR_IN: + case P54U_PIPE_MGMT | USB_DIR_IN: + case P54U_PIPE_BRG | USB_DIR_IN: + case P54U_PIPE_DEV | USB_DIR_IN: + case P54U_PIPE_INT | USB_DIR_IN: + recognized_pipes++; + } + } + priv->common.open = p54u_open; + + if (recognized_pipes < P54U_PIPE_NUMBER) { + priv->hw_type = P54U_3887; + priv->common.tx = p54u_tx_3887; + } else { + dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr); + priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr); + priv->common.tx = p54u_tx_net2280; + } + priv->common.stop = p54u_stop; + + if (priv->hw_type) + err = p54u_upload_firmware_3887(dev); + else + err = p54u_upload_firmware_net2280(dev); + if (err) + goto err_free_dev; + + err = p54u_read_eeprom(dev); + if (err) + goto err_free_dev; + + if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + u8 perm_addr[ETH_ALEN]; + + printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n"); + random_ether_addr(perm_addr); + SET_IEEE80211_PERM_ADDR(dev, perm_addr); + } + + skb_queue_head_init(&priv->rx_queue); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "prism54usb: Cannot register netdevice\n"); + goto err_free_dev; + } + + printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", + wiphy_name(dev->wiphy), + print_mac(mac, dev->wiphy->perm_addr), + priv->common.version); + + return 0; + + err_free_dev: + ieee80211_free_hw(dev); + usb_set_intfdata(intf, NULL); + usb_put_dev(udev); + return err; +} + +static void __devexit p54u_disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct p54u_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + usb_put_dev(interface_to_usbdev(intf)); + p54_free_common(dev); + ieee80211_free_hw(dev); +} + +static struct usb_driver p54u_driver = { + .name = "prism54usb", + .id_table = p54u_table, + .probe = p54u_probe, + .disconnect = p54u_disconnect, +}; + +static int __init p54u_init(void) +{ + return usb_register(&p54u_driver); +} + +static void __exit p54u_exit(void) +{ + usb_deregister(&p54u_driver); +} + +module_init(p54u_init); +module_exit(p54u_exit); diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h new file mode 100644 index 0000000..d1896b3 --- /dev/null +++ b/drivers/net/wireless/p54/p54usb.h @@ -0,0 +1,133 @@ +#ifndef PRISM54USB_H +#define PRISM54USB_H + +/* + * Defines for USB based mac80211 Prism54 driver + * + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * + * Based on the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* for isl3886 register definitions used on ver 1 devices */ +#include "p54pci.h" +#include "net2280.h" + +/* pci */ +#define NET2280_BASE 0x10000000 +#define NET2280_BASE2 0x20000000 + +/* gpio */ +#define P54U_BRG_POWER_UP (1 << GPIO0_DATA) +#define P54U_BRG_POWER_DOWN (1 << GPIO1_DATA) + +/* devinit */ +#define NET2280_CLK_4Mhz (15 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_30Mhz (2 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_60Mhz (1 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_CLK_STOP (0 << LOCAL_CLOCK_FREQUENCY) +#define NET2280_PCI_ENABLE (1 << PCI_ENABLE) +#define NET2280_PCI_SOFT_RESET (1 << PCI_SOFT_RESET) + +/* endpoints */ +#define NET2280_CLEAR_NAK_OUT_PACKETS_MODE (1 << CLEAR_NAK_OUT_PACKETS_MODE) +#define NET2280_FIFO_FLUSH (1 << FIFO_FLUSH) + +/* irq */ +#define NET2280_USB_INTERRUPT_ENABLE (1 << USB_INTERRUPT_ENABLE) +#define NET2280_PCI_INTA_INTERRUPT (1 << PCI_INTA_INTERRUPT) +#define NET2280_PCI_INTA_INTERRUPT_ENABLE (1 << PCI_INTA_INTERRUPT_ENABLE) + +/* registers */ +#define NET2280_DEVINIT 0x00 +#define NET2280_USBIRQENB1 0x24 +#define NET2280_IRQSTAT1 0x2c +#define NET2280_FIFOCTL 0x38 +#define NET2280_GPIOCTL 0x50 +#define NET2280_RELNUM 0x88 +#define NET2280_EPA_RSP 0x324 +#define NET2280_EPA_STAT 0x32c +#define NET2280_EPB_STAT 0x34c +#define NET2280_EPC_RSP 0x364 +#define NET2280_EPC_STAT 0x36c +#define NET2280_EPD_STAT 0x38c + +#define NET2280_EPA_CFG 0x320 +#define NET2280_EPB_CFG 0x340 +#define NET2280_EPC_CFG 0x360 +#define NET2280_EPD_CFG 0x380 +#define NET2280_EPE_CFG 0x3A0 +#define NET2280_EPF_CFG 0x3C0 +#define P54U_DEV_BASE 0x40000000 + +struct net2280_tx_hdr { + __le32 device_addr; + __le16 len; + __le16 follower; /* ? */ + u8 padding[8]; +} __attribute__((packed)); + +/* Some flags for the isl hardware registers controlling DMA inside the + * chip */ +#define ISL38XX_DMA_STATUS_DONE 0x00000001 +#define ISL38XX_DMA_STATUS_READY 0x00000002 +#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000 +#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004 + +enum net2280_op_type { + NET2280_BRG_U32 = 0x001F, + NET2280_BRG_CFG_U32 = 0x000F, + NET2280_BRG_CFG_U16 = 0x0003, + NET2280_DEV_U32 = 0x080F, + NET2280_DEV_CFG_U32 = 0x088F, + NET2280_DEV_CFG_U16 = 0x0883 +}; + +#define P54U_FW_BLOCK 2048 + +#define X2_SIGNATURE "x2 " +#define X2_SIGNATURE_SIZE 4 + +struct x2_header { + u8 signature[X2_SIGNATURE_SIZE]; + __le32 fw_load_addr; + __le32 fw_length; + __le32 crc; +} __attribute__((packed)); + +/* pipes 3 and 4 are not used by the driver */ +#define P54U_PIPE_NUMBER 9 + +enum p54u_pipe_addr { + P54U_PIPE_DATA = 0x01, + P54U_PIPE_MGMT = 0x02, + P54U_PIPE_3 = 0x03, + P54U_PIPE_4 = 0x04, + P54U_PIPE_BRG = 0x0d, + P54U_PIPE_DEV = 0x0e, + P54U_PIPE_INT = 0x0f +}; + +struct p54u_rx_info { + struct urb *urb; + struct ieee80211_hw *dev; +}; + +struct p54u_priv { + struct p54_common common; + struct usb_device *udev; + enum { + P54U_NET2280 = 0, + P54U_3887 + } hw_type; + + spinlock_t lock; + struct sk_buff_head rx_queue; +}; + +#endif /* PRISM54USB_H */ |
