diff options
Diffstat (limited to 'drivers/net/wireless/orinoco/hermes.c')
| -rw-r--r-- | drivers/net/wireless/orinoco/hermes.c | 286 |
1 files changed, 263 insertions, 23 deletions
diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c index 1a2fca7..6c6a23e 100644 --- a/drivers/net/wireless/orinoco/hermes.c +++ b/drivers/net/wireless/orinoco/hermes.c @@ -52,6 +52,26 @@ #define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ /* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + +/* * Debugging helpers */ @@ -70,6 +90,7 @@ #endif /* ! HERMES_DEBUG */ +static const struct hermes_ops hermes_ops_local; /* * Internal functions @@ -111,9 +132,9 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, */ /* For doing cmds that wipe the magic constant in SWSUPPORT0 */ -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp) +static int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) { int err = 0; int k; @@ -163,17 +184,18 @@ int hermes_doicmd_wait(hermes_t *hw, u16 cmd, out: return err; } -EXPORT_SYMBOL(hermes_doicmd_wait); void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) { hw->iobase = address; hw->reg_spacing = reg_spacing; hw->inten = 0x0; + hw->eeprom_pda = false; + hw->ops = &hermes_ops_local; } EXPORT_SYMBOL(hermes_struct_init); -int hermes_init(hermes_t *hw) +static int hermes_init(hermes_t *hw) { u16 reg; int err = 0; @@ -217,7 +239,6 @@ int hermes_init(hermes_t *hw) return err; } -EXPORT_SYMBOL(hermes_init); /* Issue a command to the chip, and (busy!) wait for it to * complete. @@ -228,8 +249,8 @@ EXPORT_SYMBOL(hermes_init); * > 0 on error returned by the firmware * * Callable from any context, but locking is your problem. */ -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp) +static int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) { int err; int k; @@ -291,9 +312,8 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, out: return err; } -EXPORT_SYMBOL(hermes_docmd_wait); -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) +static int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) { int err = 0; int k; @@ -333,7 +353,6 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) return 0; } -EXPORT_SYMBOL(hermes_allocate); /* Set up a BAP to read a particular chunk of data from card's internal buffer. * @@ -403,8 +422,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) * 0 on success * > 0 on error from firmware */ -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset) +static int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, + u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -422,7 +441,6 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, out: return err; } -EXPORT_SYMBOL(hermes_bap_pread); /* Write a block of data to the chip's buffer, via the * BAP. Synchronization/serialization is the caller's problem. @@ -432,8 +450,8 @@ EXPORT_SYMBOL(hermes_bap_pread); * 0 on success * > 0 on error from firmware */ -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset) +static int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, + u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -451,7 +469,6 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, out: return err; } -EXPORT_SYMBOL(hermes_bap_pwrite); /* Read a Length-Type-Value record from the card. * @@ -461,8 +478,8 @@ EXPORT_SYMBOL(hermes_bap_pwrite); * practice. * * Callable from user or bh context. */ -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, - u16 *length, void *buf) +static int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, + u16 *length, void *buf) { int err = 0; int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; @@ -505,10 +522,9 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, return 0; } -EXPORT_SYMBOL(hermes_read_ltv); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value) +static int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *value) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -533,4 +549,228 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, return err; } -EXPORT_SYMBOL(hermes_write_ltv); + +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(hermes_t *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_init(hermes_t *hw, u32 offset) +{ + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using init_cmd_wait rather than cmd_wait */ + err = hw->ops->init_cmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hw->ops->init_cmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", err); + + if (err) + return err; + + pr_debug("Enabling volatile, EP 0x%08x\n", offset); + err = hw->ops->init_cmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + pr_debug("PROGRAM_ENABLE returned %d\n", err); + + return err; +} + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_end(hermes_t *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + pr_debug("PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} + +static int hermes_program_bytes(struct hermes *hw, const char *data, + u32 addr, u32 len) +{ + /* wl lkm splits the programming into chunks of 2000 bytes. + * This restriction appears to come from USB. The PCMCIA + * adapters can program the whole lot in one go */ + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, data, len); + return 0; +} + +/* Read PDA from the adapter */ +static int hermes_read_pda(hermes_t *hw, __le16 *pda, u32 pda_addr, u16 pda_len) +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (hw->eeprom_pda) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* Read PDA */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + pr_debug("Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} + +static void hermes_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_irqsave(lock, *flags); +} + +static void hermes_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_irqrestore(lock, *flags); +} + +static void hermes_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_irq(lock); +} + +static void hermes_unlock_irq(spinlock_t *lock) __releases(lock) +{ + spin_unlock_irq(lock); +} + +/* Hermes operations for local buses */ +static const struct hermes_ops hermes_ops_local = { + .init = hermes_init, + .cmd_wait = hermes_docmd_wait, + .init_cmd_wait = hermes_doicmd_wait, + .allocate = hermes_allocate, + .read_ltv = hermes_read_ltv, + .write_ltv = hermes_write_ltv, + .bap_pread = hermes_bap_pread, + .bap_pwrite = hermes_bap_pwrite, + .read_pda = hermes_read_pda, + .program_init = hermesi_program_init, + .program_end = hermesi_program_end, + .program = hermes_program_bytes, + .lock_irqsave = hermes_lock_irqsave, + .unlock_irqrestore = hermes_unlock_irqrestore, + .lock_irq = hermes_lock_irq, + .unlock_irq = hermes_unlock_irq, +}; |
