diff options
Diffstat (limited to 'drivers/net/wireless/orinoco.c')
| -rw-r--r-- | drivers/net/wireless/orinoco.c | 4243 |
1 files changed, 4243 insertions, 0 deletions
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c new file mode 100644 index 0000000..a3a3243 --- /dev/null +++ b/drivers/net/wireless/orinoco.c @@ -0,0 +1,4243 @@ +/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) + * + * A driver for Hermes or Prism 2 chipset based PCMCIA wireless + * adaptors, with Lucent/Agere, Intersil or Symbol firmware. + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin <proski AT gnu.org> + * and David Gibson <hermes AT gibson.dropbear.id.au> + * + * (C) Copyright David Gibson, IBM Corporation 2001-2003. + * Copyright (C) 2000 David Gibson, Linuxcare Australia. + * With some help from : + * Copyright (C) 2001 Jean Tourrilhes, HP Labs + * Copyright (C) 2001 Benjamin Herrenschmidt + * + * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 + * + * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy + * AT fasta.fh-dortmund.de> + * http://www.stud.fh-dortmund.de/~andy/wvlan/ + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds AT users.sourceforge.net>. Portions created by David + * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights + * Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. */ + +/* + * v0.01 -> v0.02 - 21/3/2001 - Jean II + * o Allow to use regular ethX device name instead of dldwdX + * o Warning on IBSS with ESSID=any for firmware 6.06 + * o Put proper range.throughput values (optimistic) + * o IWSPY support (IOCTL and stat gather in Rx path) + * o Allow setting frequency in Ad-Hoc mode + * o Disable WEP setting if !has_wep to work on old firmware + * o Fix txpower range + * o Start adding support for Samsung/Compaq firmware + * + * v0.02 -> v0.03 - 23/3/2001 - Jean II + * o Start adding Symbol support - need to check all that + * o Fix Prism2/Symbol WEP to accept 128 bits keys + * o Add Symbol WEP (add authentication type) + * o Add Prism2/Symbol rate + * o Add PM timeout (holdover duration) + * o Enable "iwconfig eth0 key off" and friends (toggle flags) + * o Enable "iwconfig eth0 power unicast/all" (toggle flags) + * o Try with an Intel card. It report firmware 1.01, behave like + * an antiquated firmware, however on windows it says 2.00. Yuck ! + * o Workaround firmware bug in allocate buffer (Intel 1.01) + * o Finish external renaming to orinoco... + * o Testing with various Wavelan firmwares + * + * v0.03 -> v0.04 - 30/3/2001 - Jean II + * o Update to Wireless 11 -> add retry limit/lifetime support + * o Tested with a D-Link DWL 650 card, fill in firmware support + * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot) + * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-( + * It works on D-Link *only* after a tcpdump. Weird... + * And still doesn't work on Intel card. Grrrr... + * o Update the mode after a setport3 + * o Add preamble setting for Symbol cards (not yet enabled) + * o Don't complain as much about Symbol cards... + * + * v0.04 -> v0.04b - 22/4/2001 - David Gibson + * o Removed the 'eth' parameter - always use ethXX as the + * interface name instead of dldwdXX. The other was racy + * anyway. + * o Clean up RID definitions in hermes.h, other cleanups + * + * v0.04b -> v0.04c - 24/4/2001 - Jean II + * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card + * with vendor 02 and firmware 0.08. Added in the capabilities... + * o Tested Lucent firmware 7.28, everything works... + * + * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt + * o Spin-off Pcmcia code. This file is renamed orinoco.c, + * and orinoco_cs.c now contains only the Pcmcia specific stuff + * o Add Airport driver support on top of orinoco.c (see airport.c) + * + * v0.05 -> v0.05a - 4/5/2001 - Jean II + * o Revert to old Pcmcia code to fix breakage of Ben's changes... + * + * v0.05a -> v0.05b - 4/5/2001 - Jean II + * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V + * o D-Link firmware doesn't support multicast. We just print a few + * error messages, but otherwise everything works... + * o For David : set/getport3 works fine, just upgrade iwpriv... + * + * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt + * o Adapt airport.c to latest changes in orinoco.c + * o Remove deferred power enabling code + * + * v0.05c -> v0.05d - 5/5/2001 - Jean II + * o Workaround to SNAP decapsulate frame from Linksys AP + * original patch from : Dong Liu <dliu AT research.bell-labs.com> + * (note : the memcmp bug was mine - fixed) + * o Remove set_retry stuff, no firmware support it (bloat--). + * + * v0.05d -> v0.06 - 25/5/2001 - Jean II + * Original patch from "Hong Lin" <alin AT redhat.com>, + * "Ian Kinner" <ikinner AT redhat.com> + * and "David Smith" <dsmith AT redhat.com> + * o Init of priv->tx_rate_ctrl in firmware specific section. + * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh ! + * o Spectrum card always need cor_reset (for every reset) + * o Fix cor_reset to not lose bit 7 in the register + * o flush_stale_links to remove zombie Pcmcia instances + * o Ack previous hermes event before reset + * Me (with my little hands) + * o Allow orinoco.c to call cor_reset via priv->card_reset_handler + * o Add priv->need_card_reset to toggle this feature + * o Fix various buglets when setting WEP in Symbol firmware + * Now, encryption is fully functional on Symbol cards. Youpi ! + * + * v0.06 -> v0.06b - 25/5/2001 - Jean II + * o IBSS on Symbol use port_mode = 4. Please don't ask... + * + * v0.06b -> v0.06c - 29/5/2001 - Jean II + * o Show first spy address in /proc/net/wireless for IBSS mode as well + * + * v0.06c -> v0.06d - 6/7/2001 - David Gibson + * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus' + * wishes to reduce the number of unnecessary messages. + * o Removed bogus message on CRC error. + * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn + * <willwaghorn AT yahoo.co.uk> + * o Slight cleanup/re-arrangement of firmware detection code. + * + * v0.06d -> v0.06e - 1/8/2001 - David Gibson + * o Removed some redundant global initializers (orinoco_cs.c). + * o Added some module metadata + * + * v0.06e -> v0.06f - 14/8/2001 - David Gibson + * o Wording fix to license + * o Added a 'use_alternate_encaps' module parameter for APs which need an + * oui of 00:00:00. We really need a better way of handling this, but + * the module flag is better than nothing for now. + * + * v0.06f -> v0.07 - 20/8/2001 - David Gibson + * o Removed BAP error retries from hermes_bap_seek(). For Tx we now + * let the upper layers handle the retry, we retry explicitly in the + * Rx path, but don't make as much noise about it. + * o Firmware detection cleanups. + * + * v0.07 -> v0.07a - 1/10/3001 - Jean II + * o Add code to read Symbol firmware revision, inspired by latest code + * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee ! + * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me + * a 3Com card with a recent firmware, fill out Symbol firmware + * capabilities of latest rev (2.20), as well as older Symbol cards. + * o Disable Power Management in newer Symbol firmware, the API + * has changed (documentation needed). + * + * v0.07a -> v0.08 - 3/10/2001 - David Gibson + * o Fixed a possible buffer overrun found by the Stanford checker (in + * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not + * a big problem. + * o Turned has_big_wep on for Intersil cards. That's not true for all of + * them but we should at least let the capable ones try. + * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I + * realized that my assumption that the driver's serialization + * would prevent the BAP being busy on entry was possibly false, because + * things other than seeks may make the BAP busy. + * o Use "alternate" (oui 00:00:00) encapsulation by default. + * Setting use_old_encaps will mimic the old behaviour, but I think we + * will be able to eliminate this. + * o Don't try to make __initdata const (the version string). This can't + * work because of the way the __initdata sectioning works. + * o Added MODULE_LICENSE tags. + * o Support for PLX (transparent PCMCIA->PCI bridge) cards. + * o Changed to using the new type-fascist min/max. + * + * v0.08 -> v0.08a - 9/10/2001 - David Gibson + * o Inserted some missing acknowledgements/info into the Changelog. + * o Fixed some bugs in the normalization of signal level reporting. + * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware, + * which led to an instant crash on big-endian machines. + * + * v0.08a -> v0.08b - 20/11/2001 - David Gibson + * o Lots of cleanup and bugfixes in orinoco_plx.c + * o Cleanup to handling of Tx rate setting. + * o Removed support for old encapsulation method. + * o Removed old "dldwd" names. + * o Split RID constants into a new file hermes_rid.h + * o Renamed RID constants to match linux-wlan-ng and prism2.o + * o Bugfixes in hermes.c + * o Poke the PLX's INTCSR register, so it actually starts + * generating interrupts. These cards might actually work now. + * o Update to wireless extensions v12 (Jean II) + * o Support for tallies and inquire command (Jean II) + * o Airport updates for newer PPC kernels (BenH) + * + * v0.08b -> v0.09 - 21/12/2001 - David Gibson + * o Some new PCI IDs for PLX cards. + * o Removed broken attempt to do ALLMULTI reception. Just use + * promiscuous mode instead + * o Preliminary work for list-AP (Jean II) + * o Airport updates from (BenH) + * o Eliminated racy hw_ready stuff + * o Fixed generation of fake events in irq handler. This should + * finally kill the EIO problems (Jean II & dgibson) + * o Fixed breakage of bitrate set/get on Agere firmware (Jean II) + * + * v0.09 -> v0.09a - 2/1/2002 - David Gibson + * o Fixed stupid mistake in multicast list handling, triggering + * a BUG() + * + * v0.09a -> v0.09b - 16/1/2002 - David Gibson + * o Fixed even stupider mistake in new interrupt handling, which + * seriously broke things on big-endian machines. + * o Removed a bunch of redundant includes and exports. + * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c + * o Don't attempt to do hardware level multicast reception on + * Intersil firmware, just go promisc instead. + * o Typo fixed in hermes_issue_cmd() + * o Eliminated WIRELESS_SPY #ifdefs + * o Status code reported on Tx exceptions + * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC + * interrupts, which should fix the timeouts we're seeing. + * + * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson + * o Removed nested structures used for header parsing, so the + * driver should now work without hackery on ARM + * o Fix for WEP handling on Intersil (Hawk Newton) + * o Eliminated the /proc/hermes/ethXX/regs debugging file. It + * was never very useful. + * o Make Rx errors less noisy. + * + * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson + * o Laid the groundwork in hermes.[ch] for devices which map + * into PCI memory space rather than IO space. + * o Fixed bug in multicast handling (cleared multicast list when + * leaving promiscuous mode). + * o Relegated Tx error messages to debug. + * o Cleaned up / corrected handling of allocation lengths. + * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc). + * o Change to using alloc_etherdev() for structure allocations. + * o Check for and drop undersized packets. + * o Fixed a race in stopping/waking the queue. This should fix + * the timeout problems (Pavel Roskin) + * o Reverted to netif_wake_queue() on the ALLOC event. + * o Fixes for recent Symbol firmwares which lack AP density + * (Pavel Roskin). + * + * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson + * o Handle different register spacing, necessary for Prism 2.5 + * PCI adaptors (Steve Hill). + * o Cleaned up initialization of card structures in orinoco_cs + * and airport. Removed card->priv field. + * o Make response structure optional for hermes_docmd_wait() + * Pavel Roskin) + * o Added PCI id for Nortel emobility to orinoco_plx.c. + * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin) + * o Cleanups to firmware capability detection. + * o Arrange for orinoco_pci.c to override firmware detection. + * We should be able to support the PCI Intersil cards now. + * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin). + * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni + * Malinen). + * o Makefile changes for better integration into David Hinds + * pcmcia-cs package. + * + * v0.11a -> v0.11b - 1 May 2002 - David Gibson + * o Better error reporting in orinoco_plx_init_one() + * o Fixed multiple bad kfree() bugs introduced by the + * alloc_orinocodev() changes. + * + * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson + * o Support changing the MAC address. + * o Correct display of Intersil firmware revision numbers. + * o Entirely revised locking scheme. Should be both simpler and + * better. + * o Merged some common code in orinoco_plx, orinoco_pci and + * airport by creating orinoco_default_{open,stop,reset}() + * which are used as the dev->open, dev->stop, priv->reset + * callbacks if none are specified when alloc_orinocodev() is + * called. + * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt(). + * They didn't do anything. + * + * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson + * o Some rearrangement of code. + * o Numerous fixups to locking and rest handling, particularly + * for PCMCIA. + * o This allows open and stop net_device methods to be in + * orinoco.c now, rather than in the init modules. + * o In orinoco_cs.c link->priv now points to the struct + * net_device not to the struct orinoco_private. + * o Added a check for undersized SNAP frames, which could cause + * crashes. + * + * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson + * o Fix hw->num_init testing code, so num_init is actually + * incremented. + * o Fix very stupid bug in orinoco_cs which broke compile with + * CONFIG_SMP. + * o Squashed a warning. + * + * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson + * o Change to C9X style designated initializers. + * o Add support for 3Com AirConnect PCI. + * o No longer ignore the hard_reset argument to + * alloc_orinocodev(). Oops. + * + * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson + * o Revert the broken 0.12* locking scheme and go to a new yet + * simpler scheme. + * o Do firmware resets only in orinoco_init() and when waking + * the card from hard sleep. + * + * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson + * o Re-introduced full resets (via schedule_task()) on Tx + * timeout. + * + * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson + * o Minor cleanups to info frame handling. Add basic support + * for linkstatus info frames. + * o Include required kernel headers in orinoco.h, to avoid + * compile problems. + * + * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson + * o Implemented hard reset for Airport cards + * o Experimental suspend/resume implementation for orinoco_pci + * o Abolished /proc debugging support, replaced with a debugging + * iwpriv. Now it's ugly and simple instead of ugly and complex. + * o Bugfix in hermes.c if the firmware returned a record length + * of 0, we could go clobbering memory. + * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable + * was set, which was usually true on PCMCIA hot removes. + * o Track LINKSTATUS messages, silently drop Tx packets before + * we are connected (avoids confusing the firmware), and only + * give LINKSTATUS printk()s if the status has changed. + * + * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson + * o Cleanup: use dev instead of priv in various places. + * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event + * if we're in the middle of a (driver initiated) hard reset. + * o Bug fix: ETH_ZLEN is supposed to include the header + * (Dionysus Blazakis & Manish Karir) + * o Convert to using workqueues instead of taskqueues (and + * backwards compatibility macros for pre 2.5.41 kernels). + * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in + * airport.c + * o New orinoco_tmd.c init module from Joerg Dorchain for + * TMD7160 based PCI to PCMCIA bridges (similar to + * orinoco_plx.c). + * + * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson + * o Make hw_unavailable a counter, rather than just a flag, this + * is necessary to avoid some races (such as a card being + * removed in the middle of orinoco_reset(). + * o Restore Release/RequestConfiguration in the PCMCIA event handler + * when dealing with a driver initiated hard reset. This is + * necessary to prevent hangs due to a spurious interrupt while + * the reset is in progress. + * o Clear the 802.11 header when transmitting, even though we + * don't use it. This fixes a long standing bug on some + * firmwares, which seem to get confused if that isn't done. + * o Be less eager to de-encapsulate SNAP frames, only do so if + * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old + * behaviour broke CDP (Cisco Discovery Protocol). + * o Use dev instead of priv for free_irq() as well as + * request_irq() (oops). + * o Attempt to reset rather than giving up if we get too many + * IRQs. + * o Changed semantics of __orinoco_down() so it can be called + * safely with hw_unavailable set. It also now clears the + * linkstatus (since we're going to have to reassociate). + * + * v0.13d -> v0.13e - 12 May 2003 - David Gibson + * o Support for post-2.5.68 return values from irq handler. + * o Fixed bug where underlength packets would be double counted + * in the rx_dropped statistics. + * o Provided a module parameter to suppress linkstatus messages. + * + * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson + * o Replaced priv->connected logic with netif_carrier_on/off() + * calls. + * o Remove has_ibss_any and never set the CREATEIBSS RID when + * the ESSID is empty. Too many firmwares break if we do. + * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove + * __devinitdata from PCI ID tables, use free_netdev(). + * o Enabled shared-key authentication for Agere firmware (from + * Robert J. Moore <Robert.J.Moore AT allanbank.com> + * o Move netif_wake_queue() (back) to the Tx completion from the + * ALLOC event. This seems to prevent/mitigate the rolling + * error -110 problems at least on some Intersil firmwares. + * Theoretically reduces performance, but I can't measure it. + * Patch from Andrew Tridgell <tridge AT samba.org> + * + * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson + * o Correctly turn off shared-key authentication when requested + * (bugfix from Robert J. Moore). + * o Correct airport sleep interfaces for current 2.6 kernels. + * o Add code for key change without disabling/enabling the MAC + * port. This is supposed to allow 802.1x to work sanely, but + * doesn't seem to yet. + * + * TODO + * o New wireless extensions API (patch from Moustafa + * Youssef, updated by Jim Carter and Pavel Roskin). + * o Handle de-encapsulation within network layer, provide 802.11 + * headers (patch from Thomas 'Dent' Mirlacher) + * o RF monitor mode support + * o Fix possible races in SPY handling. + * o Disconnect wireless extensions from fundamental configuration. + * o (maybe) Software WEP support (patch from Stano Meduna). + * o (maybe) Use multiple Tx buffers - driver handling queue + * rather than firmware. + */ + +/* Locking and synchronization: + * + * The basic principle is that everything is serialized through a + * single spinlock, priv->lock. The lock is used in user, bh and irq + * context, so when taken outside hardirq context it should always be + * taken with interrupts disabled. The lock protects both the + * hardware and the struct orinoco_private. + * + * Another flag, priv->hw_unavailable indicates that the hardware is + * unavailable for an extended period of time (e.g. suspended, or in + * the middle of a hard reset). This flag is protected by the + * spinlock. All code which touches the hardware should check the + * flag after taking the lock, and if it is set, give up on whatever + * they are doing and drop the lock again. The orinoco_lock() + * function handles this (it unlocks and returns -EBUSY if + * hw_unavailable is non-zero). + */ + +#define DRIVER_NAME "orinoco" + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +#include "hermes.h" +#include "hermes_rid.h" +#include "orinoco.h" +#include "ieee802_11.h" + +/********************************************************************/ +/* Module information */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>"); +MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Level of debugging. Used in the macros in orinoco.h */ +#ifdef ORINOCO_DEBUG +int orinoco_debug = ORINOCO_DEBUG; +module_param(orinoco_debug, int, 0644); +MODULE_PARM_DESC(orinoco_debug, "Debug level"); +EXPORT_SYMBOL(orinoco_debug); +#endif + +static int suppress_linkstatus; /* = 0 */ +module_param(suppress_linkstatus, bool, 0644); +MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); + +/********************************************************************/ +/* Compile time configuration and compatibility stuff */ +/********************************************************************/ + +/* We do this this way to avoid ifdefs in the actual code */ +#ifdef WIRELESS_SPY +#define SPY_NUMBER(priv) (priv->spy_number) +#else +#define SPY_NUMBER(priv) 0 +#endif /* WIRELESS_SPY */ + +/********************************************************************/ +/* Internal constants */ +/********************************************************************/ + +#define ORINOCO_MIN_MTU 256 +#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD) + +#define SYMBOL_MAX_VER_LEN (14) +#define USER_BAP 0 +#define IRQ_BAP 1 +#define MAX_IRQLOOPS_PER_IRQ 10 +#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of + * how many events the + * device could + * legitimately generate */ +#define SMALL_KEY_SIZE 5 +#define LARGE_KEY_SIZE 13 +#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ + +#define DUMMY_FID 0xFFFF + +/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ + HERMES_MAX_MULTICAST : 0)*/ +#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) + +#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ + | HERMES_EV_TX | HERMES_EV_TXEXC \ + | HERMES_EV_WTERR | HERMES_EV_INFO \ + | HERMES_EV_INFDROP ) + +/********************************************************************/ +/* Data tables */ +/********************************************************************/ + +/* The frequency of each channel in MHz */ +static const long channel_frequency[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; +#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) + +/* This tables gives the actual meanings of the bitrate IDs returned + * by the firmware. */ +static struct { + int bitrate; /* in 100s of kilobits */ + int automatic; + u16 agere_txratectrl; + u16 intersil_txratectrl; +} bitrate_table[] = { + {110, 1, 3, 15}, /* Entry 0 is the default */ + {10, 0, 1, 1}, + {10, 1, 1, 1}, + {20, 0, 2, 2}, + {20, 1, 6, 3}, + {55, 0, 4, 4}, + {55, 1, 7, 7}, + {110, 0, 5, 8}, +}; +#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) + +/********************************************************************/ +/* Data types */ +/********************************************************************/ + +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + u16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + u16 ethertype; +} __attribute__ ((packed)); + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; + +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +struct hermes_rx_descriptor { + u16 status; + u32 time; + u8 silence; + u8 signal; + u8 rate; + u8 rxflow; + u32 reserved; +} __attribute__ ((packed)); + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int __orinoco_program_rids(struct net_device *dev); +static void __orinoco_set_multicast_list(struct net_device *dev); +static int orinoco_debug_dump_recs(struct net_device *dev); + +/********************************************************************/ +/* Internal helper functions */ +/********************************************************************/ + +static inline void set_port_type(struct orinoco_private *priv) +{ + switch (priv->iw_mode) { + case IW_MODE_INFRA: + priv->port_type = 1; + priv->createibss = 0; + break; + case IW_MODE_ADHOC: + if (priv->prefer_port3) { + priv->port_type = 3; + priv->createibss = 0; + } else { + priv->port_type = priv->ibss_port; + priv->createibss = 1; + } + break; + default: + printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", + priv->ndev->name); + } +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int orinoco_open(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = __orinoco_up(dev); + + if (! err) + priv->open = 1; + + orinoco_unlock(priv, &flags); + + return err; +} + +int orinoco_stop(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + + /* We mustn't use orinoco_lock() here, because we need to be + able to close the interface even if hw_unavailable is set + (e.g. as we're released after a PC Card removal) */ + spin_lock_irq(&priv->lock); + + priv->open = 0; + + err = __orinoco_down(dev); + + spin_unlock_irq(&priv->lock); + + return err; +} + +static struct net_device_stats *orinoco_get_stats(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + + return &priv->stats; +} + +static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_statistics *wstats = &priv->wstats; + int err = 0; + unsigned long flags; + + if (! netif_device_present(dev)) { + printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", + dev->name); + return NULL; /* FIXME: Can we do better than this? */ + } + + if (orinoco_lock(priv, &flags) != 0) + return NULL; /* FIXME: Erg, we've been signalled, how + * do we propagate this back up? */ + + if (priv->iw_mode == IW_MODE_ADHOC) { + memset(&wstats->qual, 0, sizeof(wstats->qual)); + /* If a spy address is defined, we report stats of the + * first spy address - Jean II */ + if (SPY_NUMBER(priv)) { + wstats->qual.qual = priv->spy_stat[0].qual; + wstats->qual.level = priv->spy_stat[0].level; + wstats->qual.noise = priv->spy_stat[0].noise; + wstats->qual.updated = priv->spy_stat[0].updated; + } + } else { + struct { + u16 qual, signal, noise; + } __attribute__ ((packed)) cq; + + err = HERMES_READ_RECORD(hw, USER_BAP, + HERMES_RID_COMMSQUALITY, &cq); + + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = 7; + } + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: We're in user context (I think?), so we should just + wait for the tallies to come through */ + err = hermes_inquire(hw, HERMES_INQ_TALLIES); + + orinoco_unlock(priv, &flags); + + if (err) + return NULL; + + return wstats; +} + +static void orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " + "called when hw_unavailable\n", dev->name); + return; + } + + __orinoco_set_multicast_list(dev); + orinoco_unlock(priv, &flags); +} + +static int orinoco_change_mtu(struct net_device *dev, int new_mtu) +{ + struct orinoco_private *priv = netdev_priv(dev); + + if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) + return -EINVAL; + + if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) > + (priv->nicbuf_size - ETH_HLEN) ) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} + +/********************************************************************/ +/* Tx path */ +/********************************************************************/ + +static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + hermes_t *hw = &priv->hw; + int err = 0; + u16 txfid = priv->txfid; + char *p; + struct ethhdr *eh; + int len, data_len, data_off; + struct hermes_tx_descriptor desc; + unsigned long flags; + + TRACE_ENTER(dev->name); + + if (! netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + TRACE_EXIT(dev->name); + return 1; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + TRACE_EXIT(dev->name); + return 1; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", + dev->name); + TRACE_EXIT(dev->name); + return 1; + } + + if (! netif_carrier_ok(dev)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + stats->tx_errors++; + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + TRACE_EXIT(dev->name); + return 0; + } + + /* Length of the packet body */ + /* FIXME: what if the skb is smaller than this? */ + len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN); + + eh = (struct ethhdr *)skb->data; + + memset(&desc, 0, sizeof(desc)); + desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx descriptor " + "to BAP\n", dev->name, err); + stats->tx_errors++; + goto fail; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + + /* Encapsulate Ethernet-II frames */ + if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ + struct header_struct hdr; + data_len = len; + data_off = HERMES_802_3_OFFSET + sizeof(hdr); + p = skb->data + ETH_HLEN; + + /* 802.3 header */ + memcpy(hdr.dest, eh->h_dest, ETH_ALEN); + memcpy(hdr.src, eh->h_source, ETH_ALEN); + hdr.len = htons(data_len + ENCAPS_OVERHEAD); + + /* 802.2 header */ + memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr)); + + hdr.ethertype = eh->h_proto; + err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr), + txfid, HERMES_802_3_OFFSET); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing packet " + "header to BAP\n", dev->name, err); + stats->tx_errors++; + goto fail; + } + } else { /* IEEE 802.3 frame */ + data_len = len + ETH_HLEN; + data_off = HERMES_802_3_OFFSET; + p = skb->data; + } + + /* Round up for odd length packets */ + err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), + txfid, data_off); + if (err) { + printk(KERN_ERR "%s: Error %d writing packet to BAP\n", + dev->name, err); + stats->tx_errors++; + goto fail; + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, + txfid, NULL); + if (err) { + netif_start_queue(dev); + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + stats->tx_errors++; + goto fail; + } + + dev->trans_start = jiffies; + stats->tx_bytes += data_off + data_len; + + orinoco_unlock(priv, &flags); + + dev_kfree_skb(skb); + + TRACE_EXIT(dev->name); + + return 0; + fail: + TRACE_EXIT(dev->name); + + orinoco_unlock(priv, &flags); + return err; +} + +static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 fid = hermes_read_regn(hw, ALLOCFID); + + if (fid != priv->txfid) { + if (fid != DUMMY_FID) + printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", + dev->name, fid); + return; + } + + hermes_write_regn(hw, ALLOCFID, DUMMY_FID); +} + +static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + stats->tx_packets++; + + netif_wake_queue(dev); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 fid = hermes_read_regn(hw, TXCOMPLFID); + struct hermes_tx_descriptor desc; + int err = 0; + + if (fid == DUMMY_FID) + return; /* Nothing's really happened */ + + err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " + "(FID=%04X error %d)\n", + dev->name, fid, err); + } else { + DEBUG(1, "%s: Tx error, status %d\n", + dev->name, le16_to_cpu(desc.status)); + } + + stats->tx_errors++; + + netif_wake_queue(dev); + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void orinoco_tx_timeout(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + printk(KERN_WARNING "%s: Tx timeout! " + "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", + dev->name, hermes_read_regn(hw, ALLOCFID), + hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); + + stats->tx_errors++; + + schedule_work(&priv->reset_work); +} + +/********************************************************************/ +/* Rx path (data frames) */ +/********************************************************************/ + +/* Does the frame have a SNAP header indicating it should be + * de-encapsulated to Ethernet-II? */ +static inline int is_ethersnap(void *_hdr) +{ + u8 *hdr = _hdr; + + /* We de-encapsulate all packets which, a) have SNAP headers + * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header + * and where b) the OUI of the SNAP header is 00:00:00 or + * 00:00:f8 - we need both because different APs appear to use + * different OUIs for some reason */ + return (memcmp(hdr, &encaps_hdr, 5) == 0) + && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); +} + +static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, + int level, int noise) +{ + struct orinoco_private *priv = netdev_priv(dev); + int i; + + /* Gather wireless spy statistics: for each packet, compare the + * source address with out list, and if match, get the stats... */ + for (i = 0; i < priv->spy_number; i++) + if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) { + priv->spy_stat[i].level = level - 0x95; + priv->spy_stat[i].noise = noise - 0x95; + priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0; + priv->spy_stat[i].updated = 7; + } +} + +static void orinoco_stat_gather(struct net_device *dev, + struct sk_buff *skb, + struct hermes_rx_descriptor *desc) +{ + struct orinoco_private *priv = netdev_priv(dev); + + /* Using spy support with lots of Rx packets, like in an + * infrastructure (AP), will really slow down everything, because + * the MAC address must be compared to each entry of the spy list. + * If the user really asks for it (set some address in the + * spy list), we do it, but he will pay the price. + * Note that to get here, you need both WIRELESS_SPY + * compiled in AND some addresses in the list !!! + */ + /* Note : gcc will optimise the whole section away if + * WIRELESS_SPY is not defined... - Jean II */ + if (SPY_NUMBER(priv)) { + orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN, + desc->signal, desc->silence); + } +} + +static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct iw_statistics *wstats = &priv->wstats; + struct sk_buff *skb = NULL; + u16 rxfid, status; + int length, data_len, data_off; + char *p; + struct hermes_rx_descriptor desc; + struct header_struct hdr; + struct ethhdr *eh; + int err; + + rxfid = hermes_read_regn(hw, RXFID); + + err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), + rxfid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading Rx descriptor. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } + + status = le16_to_cpu(desc.status); + + if (status & HERMES_RXSTAT_ERR) { + if (status & HERMES_RXSTAT_UNDECRYPTABLE) { + wstats->discard.code++; + DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", + dev->name); + } else { + stats->rx_crc_errors++; + DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name); + } + stats->rx_errors++; + goto drop; + } + + /* For now we ignore the 802.11 header completely, assuming + that the card's firmware has handled anything vital */ + + err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr), + rxfid, HERMES_802_3_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame header. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } + + length = ntohs(hdr.len); + + /* Sanity checks */ + if (length < 3) { /* No for even an 802.2 LLC header */ + /* At least on Symbol firmware with PCF we get quite a + lot of these legitimately - Poll frames with no + data. */ + stats->rx_dropped++; + goto drop; + } + if (length > IEEE802_11_DATA_LEN) { + printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", + dev->name, length); + stats->rx_length_errors++; + stats->rx_errors++; + goto drop; + } + + /* We need space for the packet data itself, plus an ethernet + header, plus 2 bytes so we can align the IP header on a + 32bit boundary, plus 1 byte so we can read in odd length + packets from the card, which has an IO granularity of 16 + bits */ + skb = dev_alloc_skb(length+ETH_HLEN+2+1); + if (!skb) { + printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", + dev->name); + goto drop; + } + + skb_reserve(skb, 2); /* This way the IP header is aligned */ + + /* Handle decapsulation + * In most cases, the firmware tell us about SNAP frames. + * For some reason, the SNAP frames sent by LinkSys APs + * are not properly recognised by most firmwares. + * So, check ourselves */ + if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(&hdr)) { + /* These indicate a SNAP within 802.2 LLC within + 802.11 frame which we'll need to de-encapsulate to + the original EthernetII frame. */ + + if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */ + stats->rx_length_errors++; + goto drop; + } + + /* Remove SNAP header, reconstruct EthernetII frame */ + data_len = length - ENCAPS_OVERHEAD; + data_off = HERMES_802_3_OFFSET + sizeof(hdr); + + eh = (struct ethhdr *)skb_put(skb, ETH_HLEN); + + memcpy(eh, &hdr, 2 * ETH_ALEN); + eh->h_proto = hdr.ethertype; + } else { + /* All other cases indicate a genuine 802.3 frame. No + decapsulation needed. We just throw the whole + thing in, and hope the protocol layer can deal with + it as 802.3 */ + data_len = length; + data_off = HERMES_802_3_OFFSET; + /* FIXME: we re-read from the card data we already read here */ + } + + p = skb_put(skb, data_len); + err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2), + rxfid, data_off); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + stats->rx_errors++; + goto drop; + } + + dev->last_rx = jiffies; + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + + /* Process the wireless stats if needed */ + orinoco_stat_gather(dev, skb, &desc); + + /* Pass the packet to the networking stack */ + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; + + return; + + drop: + stats->rx_dropped++; + + if (skb) + dev_kfree_skb_irq(skb); + return; +} + +/********************************************************************/ +/* Rx path (info frames) */ +/********************************************************************/ + +static void print_linkstatus(struct net_device *dev, u16 status) +{ + char * s; + + if (suppress_linkstatus) + return; + + switch (status) { + case HERMES_LINKSTATUS_NOT_CONNECTED: + s = "Not Connected"; + break; + case HERMES_LINKSTATUS_CONNECTED: + s = "Connected"; + break; + case HERMES_LINKSTATUS_DISCONNECTED: + s = "Disconnected"; + break; + case HERMES_LINKSTATUS_AP_CHANGE: + s = "AP Changed"; + break; + case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: + s = "AP Out of Range"; + break; + case HERMES_LINKSTATUS_AP_IN_RANGE: + s = "AP In Range"; + break; + case HERMES_LINKSTATUS_ASSOC_FAILED: + s = "Association Failed"; + break; + default: + s = "UNKNOWN"; + } + + printk(KERN_INFO "%s: New link status: %s (%04x)\n", + dev->name, s, status); +} + +static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 infofid; + struct { + u16 len; + u16 type; + } __attribute__ ((packed)) info; + int len, type; + int err; + + /* This is an answer to an INQUIRE command that we did earlier, + * or an information "event" generated by the card + * The controller return to us a pseudo frame containing + * the information in question - Jean II */ + infofid = hermes_read_regn(hw, INFOFID); + + /* Read the info frame header - don't try too hard */ + err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), + infofid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading info frame. " + "Frame dropped.\n", dev->name, err); + return; + } + + len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); + type = le16_to_cpu(info.type); + + switch (type) { + case HERMES_INQ_TALLIES: { + struct hermes_tallies_frame tallies; + struct iw_statistics *wstats = &priv->wstats; + + if (len > sizeof(tallies)) { + printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", + dev->name, len); + len = sizeof(tallies); + } + + /* Read directly the data (no seek) */ + hermes_read_words(hw, HERMES_DATA1, (void *) &tallies, + len / 2); /* FIXME: blech! */ + + /* Increment our various counters */ + /* wstats->discard.nwid - no wrong BSSID stuff */ + wstats->discard.code += + le16_to_cpu(tallies.RxWEPUndecryptable); + if (len == sizeof(tallies)) + wstats->discard.code += + le16_to_cpu(tallies.RxDiscards_WEPICVError) + + le16_to_cpu(tallies.RxDiscards_WEPExcluded); + wstats->discard.misc += + le16_to_cpu(tallies.TxDiscardsWrongSA); + wstats->discard.fragment += + le16_to_cpu(tallies.RxMsgInBadMsgFragments); + wstats->discard.retries += + le16_to_cpu(tallies.TxRetryLimitExceeded); + /* wstats->miss.beacon - no match */ + } + break; + case HERMES_INQ_LINKSTATUS: { + struct hermes_linkstatus linkstatus; + u16 newstatus; + int connected; + + if (len != sizeof(linkstatus)) { + printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", + dev->name, len); + break; + } + + hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus, + len / 2); + newstatus = le16_to_cpu(linkstatus.linkstatus); + + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) + || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) + || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); + + if (connected) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + if (newstatus != priv->last_linkstatus) + print_linkstatus(dev, newstatus); + + priv->last_linkstatus = newstatus; + } + break; + default: + printk(KERN_DEBUG "%s: Unknown information frame received: " + "type 0x%04x, length %d\n", dev->name, type, len); + /* We don't actually do anything about it */ + break; + } +} + +static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) +{ + if (net_ratelimit()) + printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); +} + +/********************************************************************/ +/* Internal hardware control routines */ +/********************************************************************/ + +int __orinoco_up(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_ERR "%s: Error %d configuring card\n", + dev->name, err); + return err; + } + + /* Fire things up again */ + hermes_set_irqmask(hw, ORINOCO_INTEN); + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_ERR "%s: Error %d enabling MAC port\n", + dev->name, err); + return err; + } + + netif_start_queue(dev); + + return 0; +} + +int __orinoco_down(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + netif_stop_queue(dev); + + if (! priv->hw_unavailable) { + if (! priv->broken_disableport) { + err = hermes_disable_port(hw, 0); + if (err) { + /* Some firmwares (e.g. Intersil 1.3.x) seem + * to have problems disabling the port, oh + * well, too bad. */ + printk(KERN_WARNING "%s: Error %d disabling MAC port\n", + dev->name, err); + priv->broken_disableport = 1; + } + } + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + } + + /* firmware will have to reassociate */ + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return 0; +} + +int orinoco_reinit_firmware(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + err = hermes_init(hw); + if (err) + return err; + + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO) { + /* Try workaround for old Symbol firmware bug */ + printk(KERN_WARNING "%s: firmware ALLOC bug detected " + "(old Symbol firmware?). Trying to work around... ", + dev->name); + + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err) + printk("failed!\n"); + else + printk("ok.\n"); + } + + return err; +} + +static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + + if (priv->bitratemode >= BITRATE_TABLE_SIZE) { + printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", + priv->ndev->name, priv->bitratemode); + return -EINVAL; + } + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[priv->bitratemode].agere_txratectrl); + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[priv->bitratemode].intersil_txratectrl); + break; + default: + BUG(); + } + + return err; +} + +/* Change the WEP keys and/or the current keys. Can be called + * either from __orinoco_hw_setup_wep() or directly from + * orinoco_ioctl_setiwencode(). In the later case the association + * with the AP is not broken (if the firmware can handle it), + * which is needed for 802.1x implementations. */ +static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFWEPKEYS_AGERE, + &priv->keys); + if (err) + return err; + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXKEY_AGERE, + priv->tx_key); + if (err) + return err; + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + { + int keylen; + int i; + + /* Force uniform key length to work around firmware bugs */ + keylen = le16_to_cpu(priv->keys[priv->tx_key].len); + + if (keylen > LARGE_KEY_SIZE) { + printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", + priv->ndev->name, priv->tx_key, keylen); + return -E2BIG; + } + + /* Write all 4 keys */ + for(i = 0; i < ORINOCO_MAX_KEYS; i++) { + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFDEFAULTKEY0 + i, + HERMES_BYTES_TO_RECLEN(keylen), + priv->keys[i].data); + if (err) + return err; + } + + /* Write the index of the key used in transmission */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPDEFAULTKEYID, + priv->tx_key); + if (err) + return err; + } + break; + } + + return 0; +} + +static int __orinoco_hw_setup_wep(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + int master_wep_flag; + int auth_flag; + + if (priv->wep_on) + __orinoco_hw_setup_wepkeys(priv); + + if (priv->wep_restrict) + auth_flag = HERMES_AUTH_SHARED_KEY; + else + auth_flag = HERMES_AUTH_OPEN; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ + if (priv->wep_on) { + /* Enable the shared-key authentication. */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION_AGERE, + auth_flag); + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPENABLED_AGERE, + priv->wep_on); + if (err) + return err; + break; + + case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ + if (priv->wep_on) { + if (priv->wep_restrict || + (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | + HERMES_WEP_EXCL_UNENCRYPTED; + else + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION, + auth_flag); + if (err) + return err; + } else + master_wep_flag = 0; + + if (priv->iw_mode == IW_MODE_MONITOR) + master_wep_flag |= HERMES_WEP_HOST_DECRYPT; + + /* Master WEP setting : on/off */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPFLAGS_INTERSIL, + master_wep_flag); + if (err) + return err; + + break; + } + + return 0; +} + +static int __orinoco_program_rids(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + struct hermes_idstring idbuf; + + /* Set the MAC address */ + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); + if (err) { + printk(KERN_ERR "%s: Error %d setting MAC address\n", + dev->name, err); + return err; + } + + /* Set up the link mode */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, + priv->port_type); + if (err) { + printk(KERN_ERR "%s: Error %d setting port type\n", + dev->name, err); + return err; + } + /* Set the channel/frequency */ + if (priv->channel == 0) { + printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name); + if (priv->createibss) + priv->channel = 10; + } + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel\n", + dev->name, err); + return err; + } + + if (priv->has_ibss) { + u16 createibss; + + if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { + printk(KERN_WARNING "%s: This firmware requires an " + "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); + /* With wvlan_cs, in this case, we would crash. + * hopefully, this driver will behave better... + * Jean II */ + createibss = 0; + } else { + createibss = priv->createibss; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFCREATEIBSS, + createibss); + if (err) { + printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", + dev->name, err); + return err; + } + } + + /* Set the desired ESSID */ + idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); + memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); + /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting OWNSSID\n", + dev->name, err); + return err; + } + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", + dev->name, err); + return err; + } + + /* Set the station name */ + idbuf.len = cpu_to_le16(strlen(priv->nick)); + memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting nickname\n", + dev->name, err); + return err; + } + + /* Set AP density */ + if (priv->has_sensitivity) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, + priv->ap_density); + if (err) { + printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " + "Disabling sensitivity control\n", + dev->name, err); + + priv->has_sensitivity = 0; + } + } + + /* Set RTS threshold */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting RTS threshold\n", + dev->name, err); + return err; + } + + /* Set fragmentation threshold or MWO robustness */ + if (priv->has_mwo) + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + priv->mwo_robust); + else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting fragmentation\n", + dev->name, err); + return err; + } + + /* Set bitrate */ + err = __orinoco_hw_set_bitrate(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting bitrate\n", + dev->name, err); + return err; + } + + /* Set power management */ + if (priv->has_pm) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, + priv->pm_on); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, + priv->pm_mcast); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + priv->pm_period); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + } + + /* Set preamble - only for Symbol so far... */ + if (priv->has_preamble) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + priv->preamble); + if (err) { + printk(KERN_ERR "%s: Error %d setting preamble\n", + dev->name, err); + return err; + } + } + + /* Set up encryption */ + if (priv->has_wep) { + err = __orinoco_hw_setup_wep(priv); + if (err) { + printk(KERN_ERR "%s: Error %d activating WEP\n", + dev->name, err); + return err; + } + } + + /* Set promiscuity / multicast*/ + priv->promiscuous = 0; + priv->mc_count = 0; + __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */ + + return 0; +} + +/* FIXME: return int? */ +static void +__orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + int promisc, mc_count; + + /* The Hermes doesn't seem to have an allmulti mode, so we go + * into promiscuous mode and let the upper levels deal. */ + if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || + (dev->mc_count > MAX_MULTICAST(priv)) ) { + promisc = 1; + mc_count = 0; + } else { + promisc = 0; + mc_count = dev->mc_count; + } + + if (promisc != priv->promiscuous) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPROMISCUOUSMODE, + promisc); + if (err) { + printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", + dev->name, err); + } else + priv->promiscuous = promisc; + } + + if (! promisc && (mc_count || priv->mc_count) ) { + struct dev_mc_list *p = dev->mc_list; + struct hermes_multicast mclist; + int i; + + for (i = 0; i < mc_count; i++) { + /* paranoia: is list shorter than mc_count? */ + BUG_ON(! p); + /* paranoia: bad address size in list? */ + BUG_ON(p->dmi_addrlen != ETH_ALEN); + + memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); + p = p->next; + } + + if (p) + printk(KERN_WARNING "%s: Multicast list is " + "longer than mc_count\n", dev->name); + + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, + HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), + &mclist); + if (err) + printk(KERN_ERR "%s: Error %d setting multicast list.\n", + dev->name, err); + else + priv->mc_count = mc_count; + } + + /* Since we can set the promiscuous flag when it wasn't asked + for, make sure the net_device knows about it. */ + if (priv->promiscuous) + dev->flags |= IFF_PROMISC; + else + dev->flags &= ~IFF_PROMISC; +} + +static int orinoco_reconfigure(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + unsigned long flags; + int err = 0; + + if (priv->broken_disableport) { + schedule_work(&priv->reset_work); + return 0; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_disable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n", + dev->name); + priv->broken_disableport = 1; + goto out; + } + + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_WARNING "%s: Unable to reconfigure card\n", + dev->name); + goto out; + } + + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", + dev->name); + goto out; + } + + out: + if (err) { + printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); + schedule_work(&priv->reset_work); + err = 0; + } + + orinoco_unlock(priv, &flags); + return err; + +} + +/* This must be called from user context, without locks held - use + * schedule_work() */ +static void orinoco_reset(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + /* When the hardware becomes available again, whatever + * detects that is responsible for re-initializing + * it. So no need for anything further */ + return; + + netif_stop_queue(dev); + + /* Shut off interrupts. Depending on what state the hardware + * is in, this might not work, but we'll try anyway */ + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + priv->hw_unavailable++; + priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ + netif_carrier_off(dev); + + orinoco_unlock(priv, &flags); + + if (priv->hard_reset) + err = (*priv->hard_reset)(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + /* FIXME: shutdown of some sort */ + return; + } + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", + dev->name, err); + return; + } + + spin_lock_irq(&priv->lock); /* This has to be called from user context */ + + priv->hw_unavailable--; + + /* priv->open or priv->hw_unavailable might have changed while + * we dropped the lock */ + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", + dev->name, err); + } else + dev->trans_start = jiffies; + } + + spin_unlock_irq(&priv->lock); + + return; +} + +/********************************************************************/ +/* Interrupt handler */ +/********************************************************************/ + +static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) +{ + printk(KERN_DEBUG "%s: TICK\n", dev->name); +} + +static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) +{ + /* This seems to happen a fair bit under load, but ignoring it + seems to work fine...*/ + printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", + dev->name); +} + +irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int count = MAX_IRQLOOPS_PER_IRQ; + u16 evstat, events; + /* These are used to detect a runaway interrupt situation */ + /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, + * we panic and shut down the hardware */ + static int last_irq_jiffy = 0; /* jiffies value the last time + * we were called */ + static int loops_this_jiffy = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + /* If hw is unavailable - we don't know if the irq was + * for us or not */ + return IRQ_HANDLED; + } + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + if (! events) { + orinoco_unlock(priv, &flags); + return IRQ_NONE; + } + + if (jiffies != last_irq_jiffy) + loops_this_jiffy = 0; + last_irq_jiffy = jiffies; + + while (events && count--) { + if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { + printk(KERN_WARNING "%s: IRQ handler is looping too " + "much! Resetting.\n", dev->name); + /* Disable interrupts for now */ + hermes_set_irqmask(hw, 0); + schedule_work(&priv->reset_work); + break; + } + + /* Check the card hasn't been removed */ + if (! hermes_present(hw)) { + DEBUG(0, "orinoco_interrupt(): card removed\n"); + break; + } + + if (events & HERMES_EV_TICK) + __orinoco_ev_tick(dev, hw); + if (events & HERMES_EV_WTERR) + __orinoco_ev_wterr(dev, hw); + if (events & HERMES_EV_INFDROP) + __orinoco_ev_infdrop(dev, hw); + if (events & HERMES_EV_INFO) + __orinoco_ev_info(dev, hw); + if (events & HERMES_EV_RX) + __orinoco_ev_rx(dev, hw); + if (events & HERMES_EV_TXEXC) + __orinoco_ev_txexc(dev, hw); + if (events & HERMES_EV_TX) + __orinoco_ev_tx(dev, hw); + if (events & HERMES_EV_ALLOC) + __orinoco_ev_alloc(dev, hw); + + hermes_write_regn(hw, EVACK, events); + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + }; + + orinoco_unlock(priv, &flags); + return IRQ_HANDLED; +} + +/********************************************************************/ +/* Initialization */ +/********************************************************************/ + +struct comp_id { + u16 id, variant, major, minor; +} __attribute__ ((packed)); + +static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) +{ + if (nic_id->id < 0x8000) + return FIRMWARE_TYPE_AGERE; + else if (nic_id->id == 0x8000 && nic_id->major == 0) + return FIRMWARE_TYPE_SYMBOL; + else + return FIRMWARE_TYPE_INTERSIL; +} + +/* Set priv->firmware type, determine firmware properties */ +static int determine_firmware(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + struct comp_id nic_id, sta_id; + unsigned int firmver; + char tmp[SYMBOL_MAX_VER_LEN+1]; + + /* Get the hardware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); + if (err) { + printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", + dev->name, err); + return err; + } + + le16_to_cpus(&nic_id.id); + le16_to_cpus(&nic_id.variant); + le16_to_cpus(&nic_id.major); + le16_to_cpus(&nic_id.minor); + printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", + dev->name, nic_id.id, nic_id.variant, + nic_id.major, nic_id.minor); + + priv->firmware_type = determine_firmware_type(&nic_id); + + /* Get the firmware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); + if (err) { + printk(KERN_ERR "%s: Cannot read station identity: error %d\n", + dev->name, err); + return err; + } + + le16_to_cpus(&sta_id.id); + le16_to_cpus(&sta_id.variant); + le16_to_cpus(&sta_id.major); + le16_to_cpus(&sta_id.minor); + printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", + dev->name, sta_id.id, sta_id.variant, + sta_id.major, sta_id.minor); + + switch (sta_id.id) { + case 0x15: + printk(KERN_ERR "%s: Primary firmware is active\n", + dev->name); + return -ENODEV; + case 0x14b: + printk(KERN_ERR "%s: Tertiary firmware is active\n", + dev->name); + return -ENODEV; + case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ + case 0x21: /* Symbol Spectrum24 Trilogy */ + break; + default: + printk(KERN_NOTICE "%s: Unknown station ID, please report\n", + dev->name); + break; + } + + /* Default capabilities */ + priv->has_sensitivity = 1; + priv->has_mwo = 0; + priv->has_preamble = 0; + priv->has_port3 = 1; + priv->has_ibss = 1; + priv->has_wep = 0; + priv->has_big_wep = 0; + + /* Determine capabilities from the firmware version */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, + ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); + + firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; + + priv->has_ibss = (firmver >= 0x60006); + priv->has_wep = (firmver >= 0x40020); + priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell + Gold cards from the others? */ + priv->has_mwo = (firmver >= 0x60000); + priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ + priv->ibss_port = 1; + + /* Tested with Agere firmware : + * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II + * Tested CableTron firmware : 4.32 => Anton */ + break; + case FIRMWARE_TYPE_SYMBOL: + /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ + /* Intel MAC : 00:02:B3:* */ + /* 3Com MAC : 00:50:DA:* */ + memset(tmp, 0, sizeof(tmp)); + /* Get the Symbol firmware version */ + err = hermes_read_ltv(hw, USER_BAP, + HERMES_RID_SECONDARYVERSION_SYMBOL, + SYMBOL_MAX_VER_LEN, NULL, &tmp); + if (err) { + printk(KERN_WARNING + "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", + dev->name, err); + firmver = 0; + tmp[0] = '\0'; + } else { + /* The firmware revision is a string, the format is + * something like : "V2.20-01". + * Quick and dirty parsing... - Jean II + */ + firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) + | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) + | (tmp[7] - '0'); + + tmp[SYMBOL_MAX_VER_LEN] = '\0'; + } + + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Symbol %s", tmp); + + priv->has_ibss = (firmver >= 0x20000); + priv->has_wep = (firmver >= 0x15012); + priv->has_big_wep = (firmver >= 0x20000); + priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || + (firmver >= 0x29000 && firmver < 0x30000) || + firmver >= 0x31000; + priv->has_preamble = (firmver >= 0x20000); + priv->ibss_port = 4; + /* Tested with Intel firmware : 0x20015 => Jean II */ + /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ + break; + case FIRMWARE_TYPE_INTERSIL: + /* D-Link, Linksys, Adtron, ZoomAir, and many others... + * Samsung, Compaq 100/200 and Proxim are slightly + * different and less well tested */ + /* D-Link MAC : 00:40:05:* */ + /* Addtron MAC : 00:90:D1:* */ + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Intersil %d.%d.%d", sta_id.major, sta_id.minor, + sta_id.variant); + + firmver = ((unsigned long)sta_id.major << 16) | + ((unsigned long)sta_id.minor << 8) | sta_id.variant; + + priv->has_ibss = (firmver >= 0x000700); /* FIXME */ + priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); + priv->has_pm = (firmver >= 0x000700); + + if (firmver >= 0x000800) + priv->ibss_port = 0; + else { + printk(KERN_NOTICE "%s: Intersil firmware earlier " + "than v0.8.x - several features not supported\n", + dev->name); + priv->ibss_port = 1; + } + break; + } + printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, + priv->fw_name); + + return 0; +} + +static int orinoco_init(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + struct hermes_idstring nickbuf; + u16 reclen; + int len; + + TRACE_ENTER(dev->name); + + /* No need to lock, the hw_unavailable flag is already set in + * alloc_orinocodev() */ + priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; + + /* Initialize the firmware */ + err = hermes_init(hw); + if (err != 0) { + printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", + dev->name, err); + goto out; + } + + err = determine_firmware(dev); + if (err != 0) { + printk(KERN_ERR "%s: Incompatible firmware, aborting\n", + dev->name); + goto out; + } + + if (priv->has_port3) + printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); + if (priv->has_ibss) + printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", + dev->name); + if (priv->has_wep) { + printk(KERN_DEBUG "%s: WEP supported, ", dev->name); + if (priv->has_big_wep) + printk("104-bit key\n"); + else + printk("40-bit key\n"); + } + + /* Get the MAC address */ + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + ETH_ALEN, NULL, dev->dev_addr); + if (err) { + printk(KERN_WARNING "%s: failed to read MAC address!\n", + dev->name); + goto out; + } + + printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", + dev->name, dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], + dev->dev_addr[5]); + + /* Get the station name */ + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + sizeof(nickbuf), &reclen, &nickbuf); + if (err) { + printk(KERN_ERR "%s: failed to read station name\n", + dev->name); + goto out; + } + if (nickbuf.len) + len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); + else + len = min(IW_ESSID_MAX_SIZE, 2 * reclen); + memcpy(priv->nick, &nickbuf.val, len); + priv->nick[len] = '\0'; + + printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); + + /* Get allowed channels */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, + &priv->channel_mask); + if (err) { + printk(KERN_ERR "%s: failed to read channel list!\n", + dev->name); + goto out; + } + + /* Get initial AP density */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, + &priv->ap_density); + if (err || priv->ap_density < 1 || priv->ap_density > 3) { + priv->has_sensitivity = 0; + } + + /* Get initial RTS threshold */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + &priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: failed to read RTS threshold!\n", + dev->name); + goto out; + } + + /* Get initial fragmentation settings */ + if (priv->has_mwo) + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &priv->mwo_robust); + else + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: failed to read fragmentation settings!\n", + dev->name); + goto out; + } + + /* Power management setup */ + if (priv->has_pm) { + priv->pm_on = 0; + priv->pm_mcast = 1; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + &priv->pm_period); + if (err) { + printk(KERN_ERR "%s: failed to read power management period!\n", + dev->name); + goto out; + } + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + &priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: failed to read power management timeout!\n", + dev->name); + goto out; + } + } + + /* Preamble setup */ + if (priv->has_preamble) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + &priv->preamble); + if (err) + goto out; + } + + /* Set up the default configuration */ + priv->iw_mode = IW_MODE_INFRA; + /* By default use IEEE/IBSS ad-hoc mode if we have it */ + priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); + set_port_type(priv); + priv->channel = 10; /* default channel, more-or-less arbitrary */ + + priv->promiscuous = 0; + priv->wep_on = 0; + priv->tx_key = 0; + + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO) { + /* Try workaround for old Symbol firmware bug */ + printk(KERN_WARNING "%s: firmware ALLOC bug detected " + "(old Symbol firmware?). Trying to work around... ", + dev->name); + + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err) + printk("failed!\n"); + else + printk("ok.\n"); + } + if (err) { + printk("%s: Error %d allocating Tx buffer\n", dev->name, err); + goto out; + } + + /* Make the hardware available, as long as it hasn't been + * removed elsewhere (e.g. by PCMCIA hot unplug) */ + spin_lock_irq(&priv->lock); + priv->hw_unavailable--; + spin_unlock_irq(&priv->lock); + + printk(KERN_DEBUG "%s: ready\n", dev->name); + + out: + TRACE_EXIT(dev->name); + return err; +} + +struct net_device *alloc_orinocodev(int sizeof_card, + int (*hard_reset)(struct orinoco_private *)) +{ + struct net_device *dev; + struct orinoco_private *priv; + + dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); + if (! dev) + return NULL; + priv = netdev_priv(dev); + priv->ndev = dev; + if (sizeof_card) + priv->card = (void *)((unsigned long)netdev_priv(dev) + + sizeof(struct orinoco_private)); + else + priv->card = NULL; + + /* Setup / override net_device fields */ + dev->init = orinoco_init; + dev->hard_start_xmit = orinoco_xmit; + dev->tx_timeout = orinoco_tx_timeout; + dev->watchdog_timeo = HZ; /* 1 second timeout */ + dev->get_stats = orinoco_get_stats; + dev->get_wireless_stats = orinoco_get_wireless_stats; + dev->do_ioctl = orinoco_ioctl; + dev->change_mtu = orinoco_change_mtu; + dev->set_multicast_list = orinoco_set_multicast_list; + /* we use the default eth_mac_addr for setting the MAC addr */ + + /* Set up default callbacks */ + dev->open = orinoco_open; + dev->stop = orinoco_stop; + priv->hard_reset = hard_reset; + + spin_lock_init(&priv->lock); + priv->open = 0; + priv->hw_unavailable = 1; /* orinoco_init() must clear this + * before anything else touches the + * hardware */ + INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev); + + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return dev; + +} + +void free_orinocodev(struct net_device *dev) +{ + free_netdev(dev); +} + +/********************************************************************/ +/* Wireless extensions */ +/********************************************************************/ + +static int orinoco_hw_get_bssid(struct orinoco_private *priv, + char buf[ETH_ALEN]) +{ + hermes_t *hw = &priv->hw; + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, buf); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE+1]) +{ + hermes_t *hw = &priv->hw; + int err = 0; + struct hermes_idstring essidbuf; + char *p = (char *)(&essidbuf.val); + int len; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (strlen(priv->desired_essid) > 0) { + /* We read the desired SSID from the hardware rather + than from priv->desired_essid, just in case the + firmware is allowed to change it on us. I'm not + sure about this */ + /* My guess is that the OWNSSID should always be whatever + * we set to the card, whereas CURRENT_SSID is the one that + * may change... - Jean II */ + u16 rid; + + *active = 1; + + rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : + HERMES_RID_CNFDESIREDSSID; + + err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), + NULL, &essidbuf); + if (err) + goto fail_unlock; + } else { + *active = 0; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, + sizeof(essidbuf), NULL, &essidbuf); + if (err) + goto fail_unlock; + } + + len = le16_to_cpu(essidbuf.len); + + memset(buf, 0, IW_ESSID_MAX_SIZE+1); + memcpy(buf, p, len); + buf[len] = '\0'; + + fail_unlock: + orinoco_unlock(priv, &flags); + + return err; +} + +static long orinoco_hw_get_freq(struct orinoco_private *priv) +{ + + hermes_t *hw = &priv->hw; + int err = 0; + u16 channel; + long freq = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); + if (err) + goto out; + + /* Intersil firmware 1.3.5 returns 0 when the interface is down */ + if (channel == 0) { + err = -EBUSY; + goto out; + } + + if ( (channel < 1) || (channel > NUM_CHANNELS) ) { + printk(KERN_WARNING "%s: Channel out of range (%d)!\n", + priv->ndev->name, channel); + err = -EBUSY; + goto out; + + } + freq = channel_frequency[channel-1] * 100000; + + out: + orinoco_unlock(priv, &flags); + + if (err > 0) + err = -EBUSY; + return err ? err : freq; +} + +static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max) +{ + hermes_t *hw = &priv->hw; + struct hermes_idstring list; + unsigned char *p = (unsigned char *)&list.val; + int err = 0; + int num; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, + sizeof(list), NULL, &list); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + num = le16_to_cpu(list.len); + *numrates = num; + num = min(num, max); + + for (i = 0; i < num; i++) { + rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ + } + + return 0; +} + +static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + int mode; + struct iw_range range; + int numrates; + int i, k; + unsigned long flags; + + TRACE_ENTER(dev->name); + + if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range))) + return -EFAULT; + + rrq->length = sizeof(range); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + mode = priv->iw_mode; + orinoco_unlock(priv, &flags); + + memset(&range, 0, sizeof(range)); + + /* Much of this shamelessly taken from wvlan_cs.c. No idea + * what it all means -dgibson */ + range.we_version_compiled = WIRELESS_EXT; + range.we_version_source = 11; + + range.min_nwid = range.max_nwid = 0; /* We don't use nwids */ + + /* Set available channels/frequencies */ + range.num_channels = NUM_CHANNELS; + k = 0; + for (i = 0; i < NUM_CHANNELS; i++) { + if (priv->channel_mask & (1 << i)) { + range.freq[k].i = i + 1; + range.freq[k].m = channel_frequency[i] * 100000; + range.freq[k].e = 1; + k++; + } + + if (k >= IW_MAX_FREQUENCIES) + break; + } + range.num_frequency = k; + + range.sensitivity = 3; + + if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ + /* Quality stats meaningless in ad-hoc mode */ + range.max_qual.qual = 0; + range.max_qual.level = 0; + range.max_qual.noise = 0; + range.avg_qual.qual = 0; + range.avg_qual.level = 0; + range.avg_qual.noise = 0; + } else { + range.max_qual.qual = 0x8b - 0x2f; + range.max_qual.level = 0x2f - 0x95 - 1; + range.max_qual.noise = 0x2f - 0x95 - 1; + /* Need to get better values */ + range.avg_qual.qual = 0x24; + range.avg_qual.level = 0xC2; + range.avg_qual.noise = 0x9E; + } + + err = orinoco_hw_get_bitratelist(priv, &numrates, + range.bitrate, IW_MAX_BITRATES); + if (err) + return err; + range.num_bitrates = numrates; + + /* Set an indication of the max TCP throughput in bit/s that we can + * expect using this interface. May be use for QoS stuff... + * Jean II */ + if(numrates > 2) + range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ + else + range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ + + range.min_rts = 0; + range.max_rts = 2347; + range.min_frag = 256; + range.max_frag = 2346; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + if (priv->has_wep) { + range.max_encoding_tokens = ORINOCO_MAX_KEYS; + + range.encoding_size[0] = SMALL_KEY_SIZE; + range.num_encoding_sizes = 1; + + if (priv->has_big_wep) { + range.encoding_size[1] = LARGE_KEY_SIZE; + range.num_encoding_sizes = 2; + } + } else { + range.num_encoding_sizes = 0; + range.max_encoding_tokens = 0; + } + orinoco_unlock(priv, &flags); + + range.min_pmp = 0; + range.max_pmp = 65535000; + range.min_pmt = 0; + range.max_pmt = 65535 * 1000; /* ??? */ + range.pmp_flags = IW_POWER_PERIOD; + range.pmt_flags = IW_POWER_TIMEOUT; + range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; + + range.num_txpower = 1; + range.txpower[0] = 15; /* 15dBm */ + range.txpower_capa = IW_TXPOW_DBM; + + range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range.retry_flags = IW_RETRY_LIMIT; + range.r_time_flags = IW_RETRY_LIFETIME; + range.min_retry = 0; + range.max_retry = 65535; /* ??? */ + range.min_r_time = 0; + range.max_r_time = 65535 * 1000; /* ??? */ + + if (copy_to_user(rrq->pointer, &range, sizeof(range))) + return -EFAULT; + + TRACE_EXIT(dev->name); + + return 0; +} + +static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + int setindex = priv->tx_key; + int enable = priv->wep_on; + int restricted = priv->wep_restrict; + u16 xlen = 0; + int err = 0; + char keybuf[ORINOCO_MAX_KEY_SIZE]; + unsigned long flags; + + if (! priv->has_wep) + return -EOPNOTSUPP; + + if (erq->pointer) { + /* We actually have a key to set - check its length */ + if (erq->length > LARGE_KEY_SIZE) + return -E2BIG; + + if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) + return -E2BIG; + + if (copy_from_user(keybuf, erq->pointer, erq->length)) + return -EFAULT; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (erq->pointer) { + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + /* Adjust key length to a supported value */ + if (erq->length > SMALL_KEY_SIZE) { + xlen = LARGE_KEY_SIZE; + } else if (erq->length > 0) { + xlen = SMALL_KEY_SIZE; + } else + xlen = 0; + + /* Switch on WEP if off */ + if ((!enable) && (xlen > 0)) { + setindex = index; + enable = 1; + } + } else { + /* Important note : if the user do "iwconfig eth0 enc off", + * we will arrive there with an index of -1. This is valid + * but need to be taken care off... Jean II */ + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { + if((index != -1) || (erq->flags == 0)) { + err = -EINVAL; + goto out; + } + } else { + /* Set the index : Check that the key is valid */ + if(priv->keys[index].len == 0) { + err = -EINVAL; + goto out; + } + setindex = index; + } + } + + if (erq->flags & IW_ENCODE_DISABLED) + enable = 0; + if (erq->flags & IW_ENCODE_OPEN) + restricted = 0; + if (erq->flags & IW_ENCODE_RESTRICTED) + restricted = 1; + + if (erq->pointer) { + priv->keys[index].len = cpu_to_le16(xlen); + memset(priv->keys[index].data, 0, + sizeof(priv->keys[index].data)); + memcpy(priv->keys[index].data, keybuf, erq->length); + } + priv->tx_key = setindex; + + /* Try fast key change if connected and only keys are changed */ + if (priv->wep_on && enable && (priv->wep_restrict == restricted) && + netif_carrier_ok(dev)) { + err = __orinoco_hw_setup_wepkeys(priv); + /* No need to commit if successful */ + goto out; + } + + priv->wep_on = enable; + priv->wep_restrict = restricted; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + u16 xlen = 0; + char keybuf[ORINOCO_MAX_KEY_SIZE]; + unsigned long flags; + + if (! priv->has_wep) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + erq->flags = 0; + if (! priv->wep_on) + erq->flags |= IW_ENCODE_DISABLED; + erq->flags |= index + 1; + + if (priv->wep_restrict) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + xlen = le16_to_cpu(priv->keys[index].len); + + erq->length = xlen; + + memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); + + orinoco_unlock(priv, &flags); + + if (erq->pointer) { + if (copy_to_user(erq->pointer, keybuf, xlen)) + return -EFAULT; + } + + return 0; +} + +static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char essidbuf[IW_ESSID_MAX_SIZE+1]; + unsigned long flags; + + /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it + * anyway... - Jean II */ + + memset(&essidbuf, 0, sizeof(essidbuf)); + + if (erq->flags) { + if (erq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + if (copy_from_user(&essidbuf, erq->pointer, erq->length)) + return -EFAULT; + + essidbuf[erq->length] = '\0'; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid)); + + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char essidbuf[IW_ESSID_MAX_SIZE+1]; + int active; + int err = 0; + unsigned long flags; + + TRACE_ENTER(dev->name); + + if (netif_running(dev)) { + err = orinoco_hw_get_essid(priv, &active, essidbuf); + if (err) + return err; + } else { + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf)); + orinoco_unlock(priv, &flags); + } + + erq->flags = 1; + erq->length = strlen(essidbuf) + 1; + if (erq->pointer) + if (copy_to_user(erq->pointer, essidbuf, erq->length)) + return -EFAULT; + + TRACE_EXIT(dev->name); + + return 0; +} + +static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char nickbuf[IW_ESSID_MAX_SIZE+1]; + unsigned long flags; + + if (nrq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + memset(nickbuf, 0, sizeof(nickbuf)); + + if (copy_from_user(nickbuf, nrq->pointer, nrq->length)) + return -EFAULT; + + nickbuf[nrq->length] = '\0'; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(priv->nick, nickbuf, sizeof(priv->nick)); + + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + char nickbuf[IW_ESSID_MAX_SIZE+1]; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1); + orinoco_unlock(priv, &flags); + + nrq->length = strlen(nickbuf)+1; + + if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf))) + return -EFAULT; + + return 0; +} + +static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int chan = -1; + unsigned long flags; + + /* We can only use this in Ad-Hoc demo mode to set the operating + * frequency, or in IBSS mode to set the frequency where the IBSS + * will be created - Jean II */ + if (priv->iw_mode != IW_MODE_ADHOC) + return -EOPNOTSUPP; + + if ( (frq->e == 0) && (frq->m <= 1000) ) { + /* Setting by channel number */ + chan = frq->m; + } else { + /* Setting by frequency - search the table */ + int mult = 1; + int i; + + for (i = 0; i < (6 - frq->e); i++) + mult *= 10; + + for (i = 0; i < NUM_CHANNELS; i++) + if (frq->m == (channel_frequency[i] * mult)) + chan = i+1; + } + + if ( (chan < 1) || (chan > NUM_CHANNELS) || + ! (priv->channel_mask & (1 << (chan-1)) ) ) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->channel = chan; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + u16 val; + int err; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, &val); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + srq->value = val; + srq->fixed = 0; /* auto */ + + return 0; +} + +static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = srq->value; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if ((val < 1) || (val > 3)) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->ap_density = val; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = rrq->value; + unsigned long flags; + + if (rrq->disabled) + val = 2347; + + if ( (val < 0) || (val > 2347) ) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->rts_thresh = val; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->has_mwo) { + if (frq->disabled) + priv->mwo_robust = 0; + else { + if (frq->fixed) + printk(KERN_WARNING "%s: Fixed fragmentation is " + "not supported on this firmware. " + "Using MWO robust instead.\n", dev->name); + priv->mwo_robust = 1; + } + } else { + if (frq->disabled) + priv->frag_thresh = 2346; + else { + if ( (frq->value < 256) || (frq->value > 2346) ) + err = -EINVAL; + else + priv->frag_thresh = frq->value & ~0x1; /* must be even */ + } + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 val; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->has_mwo) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &val); + if (err) + val = 0; + + frq->value = val ? 2347 : 0; + frq->disabled = ! val; + frq->fixed = 0; + } else { + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &val); + if (err) + val = 0; + + frq->value = val; + frq->disabled = (val >= 2346); + frq->fixed = 1; + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + int ratemode = -1; + int bitrate; /* 100s of kilobits */ + int i; + unsigned long flags; + + /* As the user space doesn't know our highest rate, it uses -1 + * to ask us to set the highest rate. Test it using "iwconfig + * ethX rate auto" - Jean II */ + if (rrq->value == -1) + bitrate = 110; + else { + if (rrq->value % 100000) + return -EINVAL; + bitrate = rrq->value / 100000; + } + + if ( (bitrate != 10) && (bitrate != 20) && + (bitrate != 55) && (bitrate != 110) ) + return -EINVAL; + + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if ( (bitrate_table[i].bitrate == bitrate) && + (bitrate_table[i].automatic == ! rrq->fixed) ) { + ratemode = i; + break; + } + + if (ratemode == -1) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->bitratemode = ratemode; + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + int ratemode; + int i; + u16 val; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ratemode = priv->bitratemode; + + BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); + + rrq->value = bitrate_table[ratemode].bitrate * 100000; + rrq->fixed = ! bitrate_table[ratemode].automatic; + rrq->disabled = 0; + + /* If the interface is running we try to find more about the + current mode */ + if (netif_running(dev)) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CURRENTTXRATE, &val); + if (err) + goto out; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ + /* Note : in Lucent firmware, the return value of + * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, + * and therefore is totally different from the + * encoding of HERMES_RID_CNFTXRATECONTROL. + * Don't forget that 6Mb/s is really 5.5Mb/s */ + if (val == 6) + rrq->value = 5500000; + else + rrq->value = val * 1000000; + break; + case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if (bitrate_table[i].intersil_txratectrl == val) { + ratemode = i; + break; + } + if (i >= BITRATE_TABLE_SIZE) + printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", + dev->name, val); + + rrq->value = bitrate_table[ratemode].bitrate * 100000; + break; + default: + BUG(); + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (prq->disabled) { + priv->pm_on = 0; + } else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + priv->pm_mcast = 0; + priv->pm_on = 1; + break; + case IW_POWER_ALL_R: + priv->pm_mcast = 1; + priv->pm_on = 1; + break; + case IW_POWER_ON: + /* No flags : but we may have a value - Jean II */ + break; + default: + err = -EINVAL; + } + if (err) + goto out; + + if (prq->flags & IW_POWER_TIMEOUT) { + priv->pm_on = 1; + priv->pm_timeout = prq->value / 1000; + } + if (prq->flags & IW_POWER_PERIOD) { + priv->pm_on = 1; + priv->pm_period = prq->value / 1000; + } + /* It's valid to not have a value if we are just toggling + * the flags... Jean II */ + if(!priv->pm_on) { + err = -EINVAL; + goto out; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 enable, period, timeout, mcast; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, &period); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); + if (err) + goto out; + + prq->disabled = !enable; + /* Note : by default, display the period */ + if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + prq->flags = IW_POWER_TIMEOUT; + prq->value = timeout * 1000; + } else { + prq->flags = IW_POWER_PERIOD; + prq->value = period * 1000; + } + if (mcast) + prq->flags |= IW_POWER_ALL_R; + else + prq->flags |= IW_POWER_UNICAST_R; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 short_limit, long_limit, lifetime; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, + &short_limit); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, + &long_limit); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, + &lifetime); + if (err) + goto out; + + rrq->disabled = 0; /* Can't be disabled */ + + /* Note : by default, display the retry number */ + if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + rrq->flags = IW_RETRY_LIFETIME; + rrq->value = lifetime * 1000; /* ??? */ + } else { + /* By default, display the min number */ + if ((rrq->flags & IW_RETRY_MAX)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + rrq->value = long_limit; + } else { + rrq->flags = IW_RETRY_LIMIT; + rrq->value = short_limit; + if(short_limit != long_limit) + rrq->flags |= IW_RETRY_MIN; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) wrq->u.name ); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->ibss_port = val ; + + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *)wrq->u.name; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + *val = priv->ibss_port; + orinoco_unlock(priv, &flags); + + return 0; +} + +static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) wrq->u.name ); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (val) { + case 0: /* Try to do IEEE ad-hoc mode */ + if (! priv->has_ibss) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 0; + + break; + + case 1: /* Try to do Lucent proprietary ad-hoc mode */ + if (! priv->has_port3) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 1; + break; + + default: + err = -EINVAL; + } + + if (! err) + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *)wrq->u.name; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + *val = priv->prefer_port3; + orinoco_unlock(priv, &flags); + return 0; +} + +/* Spy is used for link quality/strength measurements in Ad-Hoc mode + * Jean II */ +static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct sockaddr address[IW_MAX_SPY]; + int number = srq->length; + int i; + int err = 0; + unsigned long flags; + + /* Check the number of addresses */ + if (number > IW_MAX_SPY) + return -E2BIG; + + /* Get the data in the driver */ + if (srq->pointer) { + if (copy_from_user(address, srq->pointer, + sizeof(struct sockaddr) * number)) + return -EFAULT; + } + + /* Make sure nobody mess with the structure while we do */ + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* orinoco_lock() doesn't disable interrupts, so make sure the + * interrupt rx path don't get confused while we copy */ + priv->spy_number = 0; + + if (number > 0) { + /* Extract the addresses */ + for (i = 0; i < number; i++) + memcpy(priv->spy_address[i], address[i].sa_data, + ETH_ALEN); + /* Reset stats */ + memset(priv->spy_stat, 0, + sizeof(struct iw_quality) * IW_MAX_SPY); + /* Set number of addresses */ + priv->spy_number = number; + } + + /* Now, let the others play */ + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct sockaddr address[IW_MAX_SPY]; + struct iw_quality spy_stat[IW_MAX_SPY]; + int number; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + number = priv->spy_number; + if ((number > 0) && (srq->pointer)) { + /* Create address struct */ + for (i = 0; i < number; i++) { + memcpy(address[i].sa_data, priv->spy_address[i], + ETH_ALEN); + address[i].sa_family = AF_UNIX; + } + /* Copy stats */ + /* In theory, we should disable irqs while copying the stats + * because the rx path might update it in the middle... + * Bah, who care ? - Jean II */ + memcpy(&spy_stat, priv->spy_stat, + sizeof(struct iw_quality) * IW_MAX_SPY); + for (i=0; i < number; i++) + priv->spy_stat[i].updated = 0; + } + + orinoco_unlock(priv, &flags); + + /* Push stuff to user space */ + srq->length = number; + if(copy_to_user(srq->pointer, address, + sizeof(struct sockaddr) * number)) + return -EFAULT; + if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number), + &spy_stat, sizeof(struct iw_quality) * number)) + return -EFAULT; + + return 0; +} + +static int +orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iwreq *wrq = (struct iwreq *)rq; + int err = 0; + int tmp; + int changed = 0; + unsigned long flags; + + TRACE_ENTER(dev->name); + + /* In theory, we could allow most of the the SET stuff to be + * done. In practice, the lapse of time at startup when the + * card is not ready is very short, so why bother... Note + * that netif_device_present is different from up/down + * (ifconfig), when the device is not yet up, it is usually + * already ready... Jean II */ + if (! netif_device_present(dev)) + return -ENODEV; + + switch (cmd) { + case SIOCGIWNAME: + strcpy(wrq->u.name, "IEEE 802.11-DS"); + break; + + case SIOCGIWAP: + wrq->u.ap_addr.sa_family = ARPHRD_ETHER; + err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data); + break; + + case SIOCGIWRANGE: + err = orinoco_ioctl_getiwrange(dev, &wrq->u.data); + break; + + case SIOCSIWMODE: + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + switch (wrq->u.mode) { + case IW_MODE_ADHOC: + if (! (priv->has_ibss || priv->has_port3) ) + err = -EINVAL; + else { + priv->iw_mode = IW_MODE_ADHOC; + changed = 1; + } + break; + + case IW_MODE_INFRA: + priv->iw_mode = IW_MODE_INFRA; + changed = 1; + break; + + default: + err = -EINVAL; + break; + } + set_port_type(priv); + orinoco_unlock(priv, &flags); + break; + + case SIOCGIWMODE: + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + wrq->u.mode = priv->iw_mode; + orinoco_unlock(priv, &flags); + break; + + case SIOCSIWENCODE: + err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding); + if (! err) + changed = 1; + break; + + case SIOCGIWENCODE: + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding); + break; + + case SIOCSIWESSID: + err = orinoco_ioctl_setessid(dev, &wrq->u.essid); + if (! err) + changed = 1; + break; + + case SIOCGIWESSID: + err = orinoco_ioctl_getessid(dev, &wrq->u.essid); + break; + + case SIOCSIWNICKN: + err = orinoco_ioctl_setnick(dev, &wrq->u.data); + if (! err) + changed = 1; + break; + + case SIOCGIWNICKN: + err = orinoco_ioctl_getnick(dev, &wrq->u.data); + break; + + case SIOCGIWFREQ: + tmp = orinoco_hw_get_freq(priv); + if (tmp < 0) { + err = tmp; + } else { + wrq->u.freq.m = tmp; + wrq->u.freq.e = 1; + } + break; + + case SIOCSIWFREQ: + err = orinoco_ioctl_setfreq(dev, &wrq->u.freq); + if (! err) + changed = 1; + break; + + case SIOCGIWSENS: + err = orinoco_ioctl_getsens(dev, &wrq->u.sens); + break; + + case SIOCSIWSENS: + err = orinoco_ioctl_setsens(dev, &wrq->u.sens); + if (! err) + changed = 1; + break; + + case SIOCGIWRTS: + wrq->u.rts.value = priv->rts_thresh; + wrq->u.rts.disabled = (wrq->u.rts.value == 2347); + wrq->u.rts.fixed = 1; + break; + + case SIOCSIWRTS: + err = orinoco_ioctl_setrts(dev, &wrq->u.rts); + if (! err) + changed = 1; + break; + + case SIOCSIWFRAG: + err = orinoco_ioctl_setfrag(dev, &wrq->u.frag); + if (! err) + changed = 1; + break; + + case SIOCGIWFRAG: + err = orinoco_ioctl_getfrag(dev, &wrq->u.frag); + break; + + case SIOCSIWRATE: + err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate); + if (! err) + changed = 1; + break; + + case SIOCGIWRATE: + err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate); + break; + + case SIOCSIWPOWER: + err = orinoco_ioctl_setpower(dev, &wrq->u.power); + if (! err) + changed = 1; + break; + + case SIOCGIWPOWER: + err = orinoco_ioctl_getpower(dev, &wrq->u.power); + break; + + case SIOCGIWTXPOW: + /* The card only supports one tx power, so this is easy */ + wrq->u.txpower.value = 15; /* dBm */ + wrq->u.txpower.fixed = 1; + wrq->u.txpower.disabled = 0; + wrq->u.txpower.flags = IW_TXPOW_DBM; + break; + + case SIOCSIWRETRY: + err = -EOPNOTSUPP; + break; + + case SIOCGIWRETRY: + err = orinoco_ioctl_getretry(dev, &wrq->u.retry); + break; + + case SIOCSIWSPY: + err = orinoco_ioctl_setspy(dev, &wrq->u.data); + break; + + case SIOCGIWSPY: + err = orinoco_ioctl_getspy(dev, &wrq->u.data); + break; + + case SIOCGIWPRIV: + if (wrq->u.data.pointer) { + struct iw_priv_args privtab[] = { + { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, + { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, + { SIOCIWFIRSTPRIV + 0x2, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_port3" }, + { SIOCIWFIRSTPRIV + 0x3, 0, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_port3" }, + { SIOCIWFIRSTPRIV + 0x4, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_preamble" }, + { SIOCIWFIRSTPRIV + 0x5, 0, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_preamble" }, + { SIOCIWFIRSTPRIV + 0x6, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_ibssport" }, + { SIOCIWFIRSTPRIV + 0x7, 0, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_ibssport" }, + { SIOCIWLASTPRIV, 0, 0, "dump_recs" }, + }; + + wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); + if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab))) + err = -EFAULT; + } + break; + + case SIOCIWFIRSTPRIV + 0x0: /* force_reset */ + case SIOCIWFIRSTPRIV + 0x1: /* card_reset */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + + schedule_work(&priv->reset_work); + break; + + case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + err = orinoco_ioctl_setport3(dev, wrq); + if (! err) + changed = 1; + break; + + case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */ + err = orinoco_ioctl_getport3(dev, wrq); + break; + + case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + /* 802.11b has recently defined some short preamble. + * Basically, the Phy header has been reduced in size. + * This increase performance, especially at high rates + * (the preamble is transmitted at 1Mb/s), unfortunately + * this give compatibility troubles... - Jean II */ + if(priv->has_preamble) { + int val = *( (int *) wrq->u.name ); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + if (val) + priv->preamble = 1; + else + priv->preamble = 0; + orinoco_unlock(priv, &flags); + changed = 1; + } else + err = -EOPNOTSUPP; + break; + + case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */ + if(priv->has_preamble) { + int *val = (int *)wrq->u.name; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + *val = priv->preamble; + orinoco_unlock(priv, &flags); + } else + err = -EOPNOTSUPP; + break; + case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */ + if (! capable(CAP_NET_ADMIN)) { + err = -EPERM; + break; + } + + err = orinoco_ioctl_setibssport(dev, wrq); + if (! err) + changed = 1; + break; + + case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */ + err = orinoco_ioctl_getibssport(dev, wrq); + break; + + case SIOCIWLASTPRIV: + err = orinoco_debug_dump_recs(dev); + if (err) + printk(KERN_ERR "%s: Unable to dump records (%d)\n", + dev->name, err); + break; + + + default: + err = -EOPNOTSUPP; + } + + if (! err && changed && netif_running(dev)) { + err = orinoco_reconfigure(dev); + } + + TRACE_EXIT(dev->name); + + return err; +} + +struct { + u16 rid; + char *name; + int displaytype; +#define DISPLAY_WORDS 0 +#define DISPLAY_BYTES 1 +#define DISPLAY_STRING 2 +#define DISPLAY_XSTRING 3 +} record_table[] = { +#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type } + DEBUG_REC(CNFPORTTYPE,WORDS), + DEBUG_REC(CNFOWNMACADDR,BYTES), + DEBUG_REC(CNFDESIREDSSID,STRING), + DEBUG_REC(CNFOWNCHANNEL,WORDS), + DEBUG_REC(CNFOWNSSID,STRING), + DEBUG_REC(CNFOWNATIMWINDOW,WORDS), + DEBUG_REC(CNFSYSTEMSCALE,WORDS), + DEBUG_REC(CNFMAXDATALEN,WORDS), + DEBUG_REC(CNFPMENABLED,WORDS), + DEBUG_REC(CNFPMEPS,WORDS), + DEBUG_REC(CNFMULTICASTRECEIVE,WORDS), + DEBUG_REC(CNFMAXSLEEPDURATION,WORDS), + DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS), + DEBUG_REC(CNFOWNNAME,STRING), + DEBUG_REC(CNFOWNDTIMPERIOD,WORDS), + DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS), + DEBUG_REC(CNFWEPENABLED_AGERE,WORDS), + DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS), + DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS), + DEBUG_REC(CNFDEFAULTKEY0,BYTES), + DEBUG_REC(CNFDEFAULTKEY1,BYTES), + DEBUG_REC(CNFMWOROBUST_AGERE,WORDS), + DEBUG_REC(CNFDEFAULTKEY2,BYTES), + DEBUG_REC(CNFDEFAULTKEY3,BYTES), + DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS), + DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS), + DEBUG_REC(CNFAUTHENTICATION,WORDS), + DEBUG_REC(CNFMAXASSOCSTA,WORDS), + DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS), + DEBUG_REC(CNFTXCONTROL,WORDS), + DEBUG_REC(CNFROAMINGMODE,WORDS), + DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS), + DEBUG_REC(CNFRCVCRCERROR,WORDS), + DEBUG_REC(CNFMMLIFE,WORDS), + DEBUG_REC(CNFALTRETRYCOUNT,WORDS), + DEBUG_REC(CNFBEACONINT,WORDS), + DEBUG_REC(CNFAPPCFINFO,WORDS), + DEBUG_REC(CNFSTAPCFINFO,WORDS), + DEBUG_REC(CNFPRIORITYQUSAGE,WORDS), + DEBUG_REC(CNFTIMCTRL,WORDS), + DEBUG_REC(CNFTHIRTY2TALLY,WORDS), + DEBUG_REC(CNFENHSECURITY,WORDS), + DEBUG_REC(CNFGROUPADDRESSES,BYTES), + DEBUG_REC(CNFCREATEIBSS,WORDS), + DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS), + DEBUG_REC(CNFRTSTHRESHOLD,WORDS), + DEBUG_REC(CNFTXRATECONTROL,WORDS), + DEBUG_REC(CNFPROMISCUOUSMODE,WORDS), + DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS), + DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS), + DEBUG_REC(CNFSHORTPREAMBLE,WORDS), + DEBUG_REC(CNFWEPKEYS_AGERE,BYTES), + DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS), + DEBUG_REC(CNFTXKEY_AGERE,WORDS), + DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS), + DEBUG_REC(CNFBASICRATES,WORDS), + DEBUG_REC(CNFSUPPORTEDRATES,WORDS), + DEBUG_REC(CNFTICKTIME,WORDS), + DEBUG_REC(CNFSCANREQUEST,WORDS), + DEBUG_REC(CNFJOINREQUEST,WORDS), + DEBUG_REC(CNFAUTHENTICATESTATION,WORDS), + DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS), + DEBUG_REC(MAXLOADTIME,WORDS), + DEBUG_REC(DOWNLOADBUFFER,WORDS), + DEBUG_REC(PRIID,WORDS), + DEBUG_REC(PRISUPRANGE,WORDS), + DEBUG_REC(CFIACTRANGES,WORDS), + DEBUG_REC(NICSERNUM,XSTRING), + DEBUG_REC(NICID,WORDS), + DEBUG_REC(MFISUPRANGE,WORDS), + DEBUG_REC(CFISUPRANGE,WORDS), + DEBUG_REC(CHANNELLIST,WORDS), + DEBUG_REC(REGULATORYDOMAINS,WORDS), + DEBUG_REC(TEMPTYPE,WORDS), +/* DEBUG_REC(CIS,BYTES), */ + DEBUG_REC(STAID,WORDS), + DEBUG_REC(CURRENTSSID,STRING), + DEBUG_REC(CURRENTBSSID,BYTES), + DEBUG_REC(COMMSQUALITY,WORDS), + DEBUG_REC(CURRENTTXRATE,WORDS), + DEBUG_REC(CURRENTBEACONINTERVAL,WORDS), + DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS), + DEBUG_REC(PROTOCOLRSPTIME,WORDS), + DEBUG_REC(SHORTRETRYLIMIT,WORDS), + DEBUG_REC(LONGRETRYLIMIT,WORDS), + DEBUG_REC(MAXTRANSMITLIFETIME,WORDS), + DEBUG_REC(MAXRECEIVELIFETIME,WORDS), + DEBUG_REC(CFPOLLABLE,WORDS), + DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS), + DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS), + DEBUG_REC(OWNMACADDR,BYTES), + DEBUG_REC(SCANRESULTSTABLE,WORDS), + DEBUG_REC(PHYTYPE,WORDS), + DEBUG_REC(CURRENTCHANNEL,WORDS), + DEBUG_REC(CURRENTPOWERSTATE,WORDS), + DEBUG_REC(CCAMODE,WORDS), + DEBUG_REC(SUPPORTEDDATARATES,WORDS), + DEBUG_REC(BUILDSEQ,BYTES), + DEBUG_REC(FWID,XSTRING) +#undef DEBUG_REC +}; + +#define DEBUG_LTV_SIZE 128 + +static int orinoco_debug_dump_recs(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + u8 *val8; + u16 *val16; + int i,j; + u16 length; + int err; + + /* I'm not sure: we might have a lock here, so we'd better go + atomic, just in case. */ + val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC); + if (! val8) + return -ENOMEM; + val16 = (u16 *)val8; + + for (i = 0; i < ARRAY_SIZE(record_table); i++) { + u16 rid = record_table[i].rid; + int len; + + memset(val8, 0, DEBUG_LTV_SIZE + 2); + + err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE, + &length, val8); + if (err) { + DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid); + continue; + } + val16 = (u16 *)val8; + if (length == 0) + continue; + + printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=", + record_table[i].name, + rid, length, (length-1)*2); + len = min(((int)length-1)*2, DEBUG_LTV_SIZE); + + switch (record_table[i].displaytype) { + case DISPLAY_WORDS: + for (j = 0; j < len / 2; j++) + printk("%04X-", le16_to_cpu(val16[j])); + break; + + case DISPLAY_BYTES: + default: + for (j = 0; j < len; j++) + printk("%02X:", val8[j]); + break; + + case DISPLAY_STRING: + len = min(len, le16_to_cpu(val16[0])+2); + val8[len] = '\0'; + printk("\"%s\"", (char *)&val16[1]); + break; + + case DISPLAY_XSTRING: + printk("'%s'", (char *)val8); + } + + printk("\n"); + } + + kfree(val8); + + return 0; +} + +/********************************************************************/ +/* Debugging */ +/********************************************************************/ + +#if 0 +static void show_rx_frame(struct orinoco_rxframe_hdr *frame) +{ + printk(KERN_DEBUG "RX descriptor:\n"); + printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status); + printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time); + printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence); + printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal); + printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate); + printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow); + printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved); + + printk(KERN_DEBUG "IEEE 802.11 header:\n"); + printk(KERN_DEBUG " frame_ctl = 0x%04x\n", + frame->p80211.frame_ctl); + printk(KERN_DEBUG " duration_id = 0x%04x\n", + frame->p80211.duration_id); + printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr1[0], frame->p80211.addr1[1], + frame->p80211.addr1[2], frame->p80211.addr1[3], + frame->p80211.addr1[4], frame->p80211.addr1[5]); + printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr2[0], frame->p80211.addr2[1], + frame->p80211.addr2[2], frame->p80211.addr2[3], + frame->p80211.addr2[4], frame->p80211.addr2[5]); + printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr3[0], frame->p80211.addr3[1], + frame->p80211.addr3[2], frame->p80211.addr3[3], + frame->p80211.addr3[4], frame->p80211.addr3[5]); + printk(KERN_DEBUG " seq_ctl = 0x%04x\n", + frame->p80211.seq_ctl); + printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p80211.addr4[0], frame->p80211.addr4[1], + frame->p80211.addr4[2], frame->p80211.addr4[3], + frame->p80211.addr4[4], frame->p80211.addr4[5]); + printk(KERN_DEBUG " data_len = 0x%04x\n", + frame->p80211.data_len); + + printk(KERN_DEBUG "IEEE 802.3 header:\n"); + printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p8023.h_dest[0], frame->p8023.h_dest[1], + frame->p8023.h_dest[2], frame->p8023.h_dest[3], + frame->p8023.h_dest[4], frame->p8023.h_dest[5]); + printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n", + frame->p8023.h_source[0], frame->p8023.h_source[1], + frame->p8023.h_source[2], frame->p8023.h_source[3], + frame->p8023.h_source[4], frame->p8023.h_source[5]); + printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto); + + printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n"); + printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap); + printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap); + printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl); + printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n", + frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]); + printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype); +} +#endif /* 0 */ + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +EXPORT_SYMBOL(alloc_orinocodev); +EXPORT_SYMBOL(free_orinocodev); + +EXPORT_SYMBOL(__orinoco_up); +EXPORT_SYMBOL(__orinoco_down); +EXPORT_SYMBOL(orinoco_stop); +EXPORT_SYMBOL(orinoco_reinit_firmware); + +EXPORT_SYMBOL(orinoco_interrupt); + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson <hermes@gibson.dropbear.id.au>, " + "Pavel Roskin <proski@gnu.org>, et al)"; + +static int __init init_orinoco(void) +{ + printk(KERN_DEBUG "%s\n", version); + return 0; +} + +static void __exit exit_orinoco(void) +{ +} + +module_init(init_orinoco); +module_exit(exit_orinoco); |
