summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/orinoco.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/orinoco.c')
-rw-r--r--drivers/net/wireless/orinoco.c4243
1 files changed, 4243 insertions, 0 deletions
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
new file mode 100644
index 0000000..a3a3243
--- /dev/null
+++ b/drivers/net/wireless/orinoco.c
@@ -0,0 +1,4243 @@
+/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
+ *
+ * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
+ * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
+ *
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2001-2003.
+ * Copyright (C) 2000 David Gibson, Linuxcare Australia.
+ * With some help from :
+ * Copyright (C) 2001 Jean Tourrilhes, HP Labs
+ * Copyright (C) 2001 Benjamin Herrenschmidt
+ *
+ * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
+ *
+ * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
+ * AT fasta.fh-dortmund.de>
+ * http://www.stud.fh-dortmund.de/~andy/wvlan/
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds AT users.sourceforge.net>. Portions created by David
+ * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
+ * Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL. */
+
+/*
+ * v0.01 -> v0.02 - 21/3/2001 - Jean II
+ * o Allow to use regular ethX device name instead of dldwdX
+ * o Warning on IBSS with ESSID=any for firmware 6.06
+ * o Put proper range.throughput values (optimistic)
+ * o IWSPY support (IOCTL and stat gather in Rx path)
+ * o Allow setting frequency in Ad-Hoc mode
+ * o Disable WEP setting if !has_wep to work on old firmware
+ * o Fix txpower range
+ * o Start adding support for Samsung/Compaq firmware
+ *
+ * v0.02 -> v0.03 - 23/3/2001 - Jean II
+ * o Start adding Symbol support - need to check all that
+ * o Fix Prism2/Symbol WEP to accept 128 bits keys
+ * o Add Symbol WEP (add authentication type)
+ * o Add Prism2/Symbol rate
+ * o Add PM timeout (holdover duration)
+ * o Enable "iwconfig eth0 key off" and friends (toggle flags)
+ * o Enable "iwconfig eth0 power unicast/all" (toggle flags)
+ * o Try with an Intel card. It report firmware 1.01, behave like
+ * an antiquated firmware, however on windows it says 2.00. Yuck !
+ * o Workaround firmware bug in allocate buffer (Intel 1.01)
+ * o Finish external renaming to orinoco...
+ * o Testing with various Wavelan firmwares
+ *
+ * v0.03 -> v0.04 - 30/3/2001 - Jean II
+ * o Update to Wireless 11 -> add retry limit/lifetime support
+ * o Tested with a D-Link DWL 650 card, fill in firmware support
+ * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
+ * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
+ * It works on D-Link *only* after a tcpdump. Weird...
+ * And still doesn't work on Intel card. Grrrr...
+ * o Update the mode after a setport3
+ * o Add preamble setting for Symbol cards (not yet enabled)
+ * o Don't complain as much about Symbol cards...
+ *
+ * v0.04 -> v0.04b - 22/4/2001 - David Gibson
+ * o Removed the 'eth' parameter - always use ethXX as the
+ * interface name instead of dldwdXX. The other was racy
+ * anyway.
+ * o Clean up RID definitions in hermes.h, other cleanups
+ *
+ * v0.04b -> v0.04c - 24/4/2001 - Jean II
+ * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
+ * with vendor 02 and firmware 0.08. Added in the capabilities...
+ * o Tested Lucent firmware 7.28, everything works...
+ *
+ * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
+ * o Spin-off Pcmcia code. This file is renamed orinoco.c,
+ * and orinoco_cs.c now contains only the Pcmcia specific stuff
+ * o Add Airport driver support on top of orinoco.c (see airport.c)
+ *
+ * v0.05 -> v0.05a - 4/5/2001 - Jean II
+ * o Revert to old Pcmcia code to fix breakage of Ben's changes...
+ *
+ * v0.05a -> v0.05b - 4/5/2001 - Jean II
+ * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
+ * o D-Link firmware doesn't support multicast. We just print a few
+ * error messages, but otherwise everything works...
+ * o For David : set/getport3 works fine, just upgrade iwpriv...
+ *
+ * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
+ * o Adapt airport.c to latest changes in orinoco.c
+ * o Remove deferred power enabling code
+ *
+ * v0.05c -> v0.05d - 5/5/2001 - Jean II
+ * o Workaround to SNAP decapsulate frame from Linksys AP
+ * original patch from : Dong Liu <dliu AT research.bell-labs.com>
+ * (note : the memcmp bug was mine - fixed)
+ * o Remove set_retry stuff, no firmware support it (bloat--).
+ *
+ * v0.05d -> v0.06 - 25/5/2001 - Jean II
+ * Original patch from "Hong Lin" <alin AT redhat.com>,
+ * "Ian Kinner" <ikinner AT redhat.com>
+ * and "David Smith" <dsmith AT redhat.com>
+ * o Init of priv->tx_rate_ctrl in firmware specific section.
+ * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
+ * o Spectrum card always need cor_reset (for every reset)
+ * o Fix cor_reset to not lose bit 7 in the register
+ * o flush_stale_links to remove zombie Pcmcia instances
+ * o Ack previous hermes event before reset
+ * Me (with my little hands)
+ * o Allow orinoco.c to call cor_reset via priv->card_reset_handler
+ * o Add priv->need_card_reset to toggle this feature
+ * o Fix various buglets when setting WEP in Symbol firmware
+ * Now, encryption is fully functional on Symbol cards. Youpi !
+ *
+ * v0.06 -> v0.06b - 25/5/2001 - Jean II
+ * o IBSS on Symbol use port_mode = 4. Please don't ask...
+ *
+ * v0.06b -> v0.06c - 29/5/2001 - Jean II
+ * o Show first spy address in /proc/net/wireless for IBSS mode as well
+ *
+ * v0.06c -> v0.06d - 6/7/2001 - David Gibson
+ * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
+ * wishes to reduce the number of unnecessary messages.
+ * o Removed bogus message on CRC error.
+ * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
+ * <willwaghorn AT yahoo.co.uk>
+ * o Slight cleanup/re-arrangement of firmware detection code.
+ *
+ * v0.06d -> v0.06e - 1/8/2001 - David Gibson
+ * o Removed some redundant global initializers (orinoco_cs.c).
+ * o Added some module metadata
+ *
+ * v0.06e -> v0.06f - 14/8/2001 - David Gibson
+ * o Wording fix to license
+ * o Added a 'use_alternate_encaps' module parameter for APs which need an
+ * oui of 00:00:00. We really need a better way of handling this, but
+ * the module flag is better than nothing for now.
+ *
+ * v0.06f -> v0.07 - 20/8/2001 - David Gibson
+ * o Removed BAP error retries from hermes_bap_seek(). For Tx we now
+ * let the upper layers handle the retry, we retry explicitly in the
+ * Rx path, but don't make as much noise about it.
+ * o Firmware detection cleanups.
+ *
+ * v0.07 -> v0.07a - 1/10/3001 - Jean II
+ * o Add code to read Symbol firmware revision, inspired by latest code
+ * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
+ * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
+ * a 3Com card with a recent firmware, fill out Symbol firmware
+ * capabilities of latest rev (2.20), as well as older Symbol cards.
+ * o Disable Power Management in newer Symbol firmware, the API
+ * has changed (documentation needed).
+ *
+ * v0.07a -> v0.08 - 3/10/2001 - David Gibson
+ * o Fixed a possible buffer overrun found by the Stanford checker (in
+ * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not
+ * a big problem.
+ * o Turned has_big_wep on for Intersil cards. That's not true for all of
+ * them but we should at least let the capable ones try.
+ * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I
+ * realized that my assumption that the driver's serialization
+ * would prevent the BAP being busy on entry was possibly false, because
+ * things other than seeks may make the BAP busy.
+ * o Use "alternate" (oui 00:00:00) encapsulation by default.
+ * Setting use_old_encaps will mimic the old behaviour, but I think we
+ * will be able to eliminate this.
+ * o Don't try to make __initdata const (the version string). This can't
+ * work because of the way the __initdata sectioning works.
+ * o Added MODULE_LICENSE tags.
+ * o Support for PLX (transparent PCMCIA->PCI bridge) cards.
+ * o Changed to using the new type-fascist min/max.
+ *
+ * v0.08 -> v0.08a - 9/10/2001 - David Gibson
+ * o Inserted some missing acknowledgements/info into the Changelog.
+ * o Fixed some bugs in the normalization of signal level reporting.
+ * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
+ * which led to an instant crash on big-endian machines.
+ *
+ * v0.08a -> v0.08b - 20/11/2001 - David Gibson
+ * o Lots of cleanup and bugfixes in orinoco_plx.c
+ * o Cleanup to handling of Tx rate setting.
+ * o Removed support for old encapsulation method.
+ * o Removed old "dldwd" names.
+ * o Split RID constants into a new file hermes_rid.h
+ * o Renamed RID constants to match linux-wlan-ng and prism2.o
+ * o Bugfixes in hermes.c
+ * o Poke the PLX's INTCSR register, so it actually starts
+ * generating interrupts. These cards might actually work now.
+ * o Update to wireless extensions v12 (Jean II)
+ * o Support for tallies and inquire command (Jean II)
+ * o Airport updates for newer PPC kernels (BenH)
+ *
+ * v0.08b -> v0.09 - 21/12/2001 - David Gibson
+ * o Some new PCI IDs for PLX cards.
+ * o Removed broken attempt to do ALLMULTI reception. Just use
+ * promiscuous mode instead
+ * o Preliminary work for list-AP (Jean II)
+ * o Airport updates from (BenH)
+ * o Eliminated racy hw_ready stuff
+ * o Fixed generation of fake events in irq handler. This should
+ * finally kill the EIO problems (Jean II & dgibson)
+ * o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
+ *
+ * v0.09 -> v0.09a - 2/1/2002 - David Gibson
+ * o Fixed stupid mistake in multicast list handling, triggering
+ * a BUG()
+ *
+ * v0.09a -> v0.09b - 16/1/2002 - David Gibson
+ * o Fixed even stupider mistake in new interrupt handling, which
+ * seriously broke things on big-endian machines.
+ * o Removed a bunch of redundant includes and exports.
+ * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
+ * o Don't attempt to do hardware level multicast reception on
+ * Intersil firmware, just go promisc instead.
+ * o Typo fixed in hermes_issue_cmd()
+ * o Eliminated WIRELESS_SPY #ifdefs
+ * o Status code reported on Tx exceptions
+ * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
+ * interrupts, which should fix the timeouts we're seeing.
+ *
+ * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
+ * o Removed nested structures used for header parsing, so the
+ * driver should now work without hackery on ARM
+ * o Fix for WEP handling on Intersil (Hawk Newton)
+ * o Eliminated the /proc/hermes/ethXX/regs debugging file. It
+ * was never very useful.
+ * o Make Rx errors less noisy.
+ *
+ * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
+ * o Laid the groundwork in hermes.[ch] for devices which map
+ * into PCI memory space rather than IO space.
+ * o Fixed bug in multicast handling (cleared multicast list when
+ * leaving promiscuous mode).
+ * o Relegated Tx error messages to debug.
+ * o Cleaned up / corrected handling of allocation lengths.
+ * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
+ * o Change to using alloc_etherdev() for structure allocations.
+ * o Check for and drop undersized packets.
+ * o Fixed a race in stopping/waking the queue. This should fix
+ * the timeout problems (Pavel Roskin)
+ * o Reverted to netif_wake_queue() on the ALLOC event.
+ * o Fixes for recent Symbol firmwares which lack AP density
+ * (Pavel Roskin).
+ *
+ * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
+ * o Handle different register spacing, necessary for Prism 2.5
+ * PCI adaptors (Steve Hill).
+ * o Cleaned up initialization of card structures in orinoco_cs
+ * and airport. Removed card->priv field.
+ * o Make response structure optional for hermes_docmd_wait()
+ * Pavel Roskin)
+ * o Added PCI id for Nortel emobility to orinoco_plx.c.
+ * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
+ * o Cleanups to firmware capability detection.
+ * o Arrange for orinoco_pci.c to override firmware detection.
+ * We should be able to support the PCI Intersil cards now.
+ * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
+ * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
+ * Malinen).
+ * o Makefile changes for better integration into David Hinds
+ * pcmcia-cs package.
+ *
+ * v0.11a -> v0.11b - 1 May 2002 - David Gibson
+ * o Better error reporting in orinoco_plx_init_one()
+ * o Fixed multiple bad kfree() bugs introduced by the
+ * alloc_orinocodev() changes.
+ *
+ * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
+ * o Support changing the MAC address.
+ * o Correct display of Intersil firmware revision numbers.
+ * o Entirely revised locking scheme. Should be both simpler and
+ * better.
+ * o Merged some common code in orinoco_plx, orinoco_pci and
+ * airport by creating orinoco_default_{open,stop,reset}()
+ * which are used as the dev->open, dev->stop, priv->reset
+ * callbacks if none are specified when alloc_orinocodev() is
+ * called.
+ * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
+ * They didn't do anything.
+ *
+ * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
+ * o Some rearrangement of code.
+ * o Numerous fixups to locking and rest handling, particularly
+ * for PCMCIA.
+ * o This allows open and stop net_device methods to be in
+ * orinoco.c now, rather than in the init modules.
+ * o In orinoco_cs.c link->priv now points to the struct
+ * net_device not to the struct orinoco_private.
+ * o Added a check for undersized SNAP frames, which could cause
+ * crashes.
+ *
+ * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
+ * o Fix hw->num_init testing code, so num_init is actually
+ * incremented.
+ * o Fix very stupid bug in orinoco_cs which broke compile with
+ * CONFIG_SMP.
+ * o Squashed a warning.
+ *
+ * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
+ * o Change to C9X style designated initializers.
+ * o Add support for 3Com AirConnect PCI.
+ * o No longer ignore the hard_reset argument to
+ * alloc_orinocodev(). Oops.
+ *
+ * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
+ * o Revert the broken 0.12* locking scheme and go to a new yet
+ * simpler scheme.
+ * o Do firmware resets only in orinoco_init() and when waking
+ * the card from hard sleep.
+ *
+ * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
+ * o Re-introduced full resets (via schedule_task()) on Tx
+ * timeout.
+ *
+ * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
+ * o Minor cleanups to info frame handling. Add basic support
+ * for linkstatus info frames.
+ * o Include required kernel headers in orinoco.h, to avoid
+ * compile problems.
+ *
+ * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
+ * o Implemented hard reset for Airport cards
+ * o Experimental suspend/resume implementation for orinoco_pci
+ * o Abolished /proc debugging support, replaced with a debugging
+ * iwpriv. Now it's ugly and simple instead of ugly and complex.
+ * o Bugfix in hermes.c if the firmware returned a record length
+ * of 0, we could go clobbering memory.
+ * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
+ * was set, which was usually true on PCMCIA hot removes.
+ * o Track LINKSTATUS messages, silently drop Tx packets before
+ * we are connected (avoids confusing the firmware), and only
+ * give LINKSTATUS printk()s if the status has changed.
+ *
+ * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
+ * o Cleanup: use dev instead of priv in various places.
+ * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
+ * if we're in the middle of a (driver initiated) hard reset.
+ * o Bug fix: ETH_ZLEN is supposed to include the header
+ * (Dionysus Blazakis & Manish Karir)
+ * o Convert to using workqueues instead of taskqueues (and
+ * backwards compatibility macros for pre 2.5.41 kernels).
+ * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
+ * airport.c
+ * o New orinoco_tmd.c init module from Joerg Dorchain for
+ * TMD7160 based PCI to PCMCIA bridges (similar to
+ * orinoco_plx.c).
+ *
+ * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
+ * o Make hw_unavailable a counter, rather than just a flag, this
+ * is necessary to avoid some races (such as a card being
+ * removed in the middle of orinoco_reset().
+ * o Restore Release/RequestConfiguration in the PCMCIA event handler
+ * when dealing with a driver initiated hard reset. This is
+ * necessary to prevent hangs due to a spurious interrupt while
+ * the reset is in progress.
+ * o Clear the 802.11 header when transmitting, even though we
+ * don't use it. This fixes a long standing bug on some
+ * firmwares, which seem to get confused if that isn't done.
+ * o Be less eager to de-encapsulate SNAP frames, only do so if
+ * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old
+ * behaviour broke CDP (Cisco Discovery Protocol).
+ * o Use dev instead of priv for free_irq() as well as
+ * request_irq() (oops).
+ * o Attempt to reset rather than giving up if we get too many
+ * IRQs.
+ * o Changed semantics of __orinoco_down() so it can be called
+ * safely with hw_unavailable set. It also now clears the
+ * linkstatus (since we're going to have to reassociate).
+ *
+ * v0.13d -> v0.13e - 12 May 2003 - David Gibson
+ * o Support for post-2.5.68 return values from irq handler.
+ * o Fixed bug where underlength packets would be double counted
+ * in the rx_dropped statistics.
+ * o Provided a module parameter to suppress linkstatus messages.
+ *
+ * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
+ * o Replaced priv->connected logic with netif_carrier_on/off()
+ * calls.
+ * o Remove has_ibss_any and never set the CREATEIBSS RID when
+ * the ESSID is empty. Too many firmwares break if we do.
+ * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
+ * __devinitdata from PCI ID tables, use free_netdev().
+ * o Enabled shared-key authentication for Agere firmware (from
+ * Robert J. Moore <Robert.J.Moore AT allanbank.com>
+ * o Move netif_wake_queue() (back) to the Tx completion from the
+ * ALLOC event. This seems to prevent/mitigate the rolling
+ * error -110 problems at least on some Intersil firmwares.
+ * Theoretically reduces performance, but I can't measure it.
+ * Patch from Andrew Tridgell <tridge AT samba.org>
+ *
+ * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
+ * o Correctly turn off shared-key authentication when requested
+ * (bugfix from Robert J. Moore).
+ * o Correct airport sleep interfaces for current 2.6 kernels.
+ * o Add code for key change without disabling/enabling the MAC
+ * port. This is supposed to allow 802.1x to work sanely, but
+ * doesn't seem to yet.
+ *
+ * TODO
+ * o New wireless extensions API (patch from Moustafa
+ * Youssef, updated by Jim Carter and Pavel Roskin).
+ * o Handle de-encapsulation within network layer, provide 802.11
+ * headers (patch from Thomas 'Dent' Mirlacher)
+ * o RF monitor mode support
+ * o Fix possible races in SPY handling.
+ * o Disconnect wireless extensions from fundamental configuration.
+ * o (maybe) Software WEP support (patch from Stano Meduna).
+ * o (maybe) Use multiple Tx buffers - driver handling queue
+ * rather than firmware.
+ */
+
+/* Locking and synchronization:
+ *
+ * The basic principle is that everything is serialized through a
+ * single spinlock, priv->lock. The lock is used in user, bh and irq
+ * context, so when taken outside hardirq context it should always be
+ * taken with interrupts disabled. The lock protects both the
+ * hardware and the struct orinoco_private.
+ *
+ * Another flag, priv->hw_unavailable indicates that the hardware is
+ * unavailable for an extended period of time (e.g. suspended, or in
+ * the middle of a hard reset). This flag is protected by the
+ * spinlock. All code which touches the hardware should check the
+ * flag after taking the lock, and if it is set, give up on whatever
+ * they are doing and drop the lock again. The orinoco_lock()
+ * function handles this (it unlocks and returns -EBUSY if
+ * hw_unavailable is non-zero).
+ */
+
+#define DRIVER_NAME "orinoco"
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "hermes.h"
+#include "hermes_rid.h"
+#include "orinoco.h"
+#include "ieee802_11.h"
+
+/********************************************************************/
+/* Module information */
+/********************************************************************/
+
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Level of debugging. Used in the macros in orinoco.h */
+#ifdef ORINOCO_DEBUG
+int orinoco_debug = ORINOCO_DEBUG;
+module_param(orinoco_debug, int, 0644);
+MODULE_PARM_DESC(orinoco_debug, "Debug level");
+EXPORT_SYMBOL(orinoco_debug);
+#endif
+
+static int suppress_linkstatus; /* = 0 */
+module_param(suppress_linkstatus, bool, 0644);
+MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
+
+/********************************************************************/
+/* Compile time configuration and compatibility stuff */
+/********************************************************************/
+
+/* We do this this way to avoid ifdefs in the actual code */
+#ifdef WIRELESS_SPY
+#define SPY_NUMBER(priv) (priv->spy_number)
+#else
+#define SPY_NUMBER(priv) 0
+#endif /* WIRELESS_SPY */
+
+/********************************************************************/
+/* Internal constants */
+/********************************************************************/
+
+#define ORINOCO_MIN_MTU 256
+#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)
+
+#define SYMBOL_MAX_VER_LEN (14)
+#define USER_BAP 0
+#define IRQ_BAP 1
+#define MAX_IRQLOOPS_PER_IRQ 10
+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
+ * how many events the
+ * device could
+ * legitimately generate */
+#define SMALL_KEY_SIZE 5
+#define LARGE_KEY_SIZE 13
+#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
+
+#define DUMMY_FID 0xFFFF
+
+/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
+ HERMES_MAX_MULTICAST : 0)*/
+#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
+
+#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
+ | HERMES_EV_TX | HERMES_EV_TXEXC \
+ | HERMES_EV_WTERR | HERMES_EV_INFO \
+ | HERMES_EV_INFDROP )
+
+/********************************************************************/
+/* Data tables */
+/********************************************************************/
+
+/* The frequency of each channel in MHz */
+static const long channel_frequency[] = {
+ 2412, 2417, 2422, 2427, 2432, 2437, 2442,
+ 2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
+
+/* This tables gives the actual meanings of the bitrate IDs returned
+ * by the firmware. */
+static struct {
+ int bitrate; /* in 100s of kilobits */
+ int automatic;
+ u16 agere_txratectrl;
+ u16 intersil_txratectrl;
+} bitrate_table[] = {
+ {110, 1, 3, 15}, /* Entry 0 is the default */
+ {10, 0, 1, 1},
+ {10, 1, 1, 1},
+ {20, 0, 2, 2},
+ {20, 1, 6, 3},
+ {55, 0, 4, 4},
+ {55, 1, 7, 7},
+ {110, 0, 5, 8},
+};
+#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
+
+/********************************************************************/
+/* Data types */
+/********************************************************************/
+
+struct header_struct {
+ /* 802.3 */
+ u8 dest[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u16 len;
+ /* 802.2 */
+ u8 dsap;
+ u8 ssap;
+ u8 ctrl;
+ /* SNAP */
+ u8 oui[3];
+ u16 ethertype;
+} __attribute__ ((packed));
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+
+#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+
+struct hermes_rx_descriptor {
+ u16 status;
+ u32 time;
+ u8 silence;
+ u8 signal;
+ u8 rate;
+ u8 rxflow;
+ u32 reserved;
+} __attribute__ ((packed));
+
+/********************************************************************/
+/* Function prototypes */
+/********************************************************************/
+
+static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int __orinoco_program_rids(struct net_device *dev);
+static void __orinoco_set_multicast_list(struct net_device *dev);
+static int orinoco_debug_dump_recs(struct net_device *dev);
+
+/********************************************************************/
+/* Internal helper functions */
+/********************************************************************/
+
+static inline void set_port_type(struct orinoco_private *priv)
+{
+ switch (priv->iw_mode) {
+ case IW_MODE_INFRA:
+ priv->port_type = 1;
+ priv->createibss = 0;
+ break;
+ case IW_MODE_ADHOC:
+ if (priv->prefer_port3) {
+ priv->port_type = 3;
+ priv->createibss = 0;
+ } else {
+ priv->port_type = priv->ibss_port;
+ priv->createibss = 1;
+ }
+ break;
+ default:
+ printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
+ priv->ndev->name);
+ }
+}
+
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
+
+static int orinoco_open(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = __orinoco_up(dev);
+
+ if (! err)
+ priv->open = 1;
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+int orinoco_stop(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+
+ /* We mustn't use orinoco_lock() here, because we need to be
+ able to close the interface even if hw_unavailable is set
+ (e.g. as we're released after a PC Card removal) */
+ spin_lock_irq(&priv->lock);
+
+ priv->open = 0;
+
+ err = __orinoco_down(dev);
+
+ spin_unlock_irq(&priv->lock);
+
+ return err;
+}
+
+static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ return &priv->stats;
+}
+
+static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_statistics *wstats = &priv->wstats;
+ int err = 0;
+ unsigned long flags;
+
+ if (! netif_device_present(dev)) {
+ printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
+ dev->name);
+ return NULL; /* FIXME: Can we do better than this? */
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return NULL; /* FIXME: Erg, we've been signalled, how
+ * do we propagate this back up? */
+
+ if (priv->iw_mode == IW_MODE_ADHOC) {
+ memset(&wstats->qual, 0, sizeof(wstats->qual));
+ /* If a spy address is defined, we report stats of the
+ * first spy address - Jean II */
+ if (SPY_NUMBER(priv)) {
+ wstats->qual.qual = priv->spy_stat[0].qual;
+ wstats->qual.level = priv->spy_stat[0].level;
+ wstats->qual.noise = priv->spy_stat[0].noise;
+ wstats->qual.updated = priv->spy_stat[0].updated;
+ }
+ } else {
+ struct {
+ u16 qual, signal, noise;
+ } __attribute__ ((packed)) cq;
+
+ err = HERMES_READ_RECORD(hw, USER_BAP,
+ HERMES_RID_COMMSQUALITY, &cq);
+
+ wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+ wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+ wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+ wstats->qual.updated = 7;
+ }
+
+ /* We can't really wait for the tallies inquiry command to
+ * complete, so we just use the previous results and trigger
+ * a new tallies inquiry command for next time - Jean II */
+ /* FIXME: We're in user context (I think?), so we should just
+ wait for the tallies to come through */
+ err = hermes_inquire(hw, HERMES_INQ_TALLIES);
+
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return NULL;
+
+ return wstats;
+}
+
+static void orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
+ "called when hw_unavailable\n", dev->name);
+ return;
+ }
+
+ __orinoco_set_multicast_list(dev);
+ orinoco_unlock(priv, &flags);
+}
+
+static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
+ return -EINVAL;
+
+ if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
+ (priv->nicbuf_size - ETH_HLEN) )
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+/********************************************************************/
+/* Tx path */
+/********************************************************************/
+
+static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 txfid = priv->txfid;
+ char *p;
+ struct ethhdr *eh;
+ int len, data_len, data_off;
+ struct hermes_tx_descriptor desc;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ if (! netif_running(dev)) {
+ printk(KERN_ERR "%s: Tx on stopped device!\n",
+ dev->name);
+ TRACE_EXIT(dev->name);
+ return 1;
+ }
+
+ if (netif_queue_stopped(dev)) {
+ printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
+ dev->name);
+ TRACE_EXIT(dev->name);
+ return 1;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
+ dev->name);
+ TRACE_EXIT(dev->name);
+ return 1;
+ }
+
+ if (! netif_carrier_ok(dev)) {
+ /* Oops, the firmware hasn't established a connection,
+ silently drop the packet (this seems to be the
+ safest approach). */
+ stats->tx_errors++;
+ orinoco_unlock(priv, &flags);
+ dev_kfree_skb(skb);
+ TRACE_EXIT(dev->name);
+ return 0;
+ }
+
+ /* Length of the packet body */
+ /* FIXME: what if the skb is smaller than this? */
+ len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
+
+ eh = (struct ethhdr *)skb->data;
+
+ memset(&desc, 0, sizeof(desc));
+ desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing Tx descriptor "
+ "to BAP\n", dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+
+ /* Clear the 802.11 header and data length fields - some
+ * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
+ * if this isn't done. */
+ hermes_clear_words(hw, HERMES_DATA0,
+ HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
+
+ /* Encapsulate Ethernet-II frames */
+ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+ struct header_struct hdr;
+ data_len = len;
+ data_off = HERMES_802_3_OFFSET + sizeof(hdr);
+ p = skb->data + ETH_HLEN;
+
+ /* 802.3 header */
+ memcpy(hdr.dest, eh->h_dest, ETH_ALEN);
+ memcpy(hdr.src, eh->h_source, ETH_ALEN);
+ hdr.len = htons(data_len + ENCAPS_OVERHEAD);
+
+ /* 802.2 header */
+ memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr));
+
+ hdr.ethertype = eh->h_proto;
+ err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
+ txfid, HERMES_802_3_OFFSET);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing packet "
+ "header to BAP\n", dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+ } else { /* IEEE 802.3 frame */
+ data_len = len + ETH_HLEN;
+ data_off = HERMES_802_3_OFFSET;
+ p = skb->data;
+ }
+
+ /* Round up for odd length packets */
+ err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
+ txfid, data_off);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
+ dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+
+ /* Finally, we actually initiate the send */
+ netif_stop_queue(dev);
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+ txfid, NULL);
+ if (err) {
+ netif_start_queue(dev);
+ printk(KERN_ERR "%s: Error %d transmitting packet\n",
+ dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+
+ dev->trans_start = jiffies;
+ stats->tx_bytes += data_off + data_len;
+
+ orinoco_unlock(priv, &flags);
+
+ dev_kfree_skb(skb);
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+ fail:
+ TRACE_EXIT(dev->name);
+
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 fid = hermes_read_regn(hw, ALLOCFID);
+
+ if (fid != priv->txfid) {
+ if (fid != DUMMY_FID)
+ printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
+ dev->name, fid);
+ return;
+ }
+
+ hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+
+ stats->tx_packets++;
+
+ netif_wake_queue(dev);
+
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ u16 fid = hermes_read_regn(hw, TXCOMPLFID);
+ struct hermes_tx_descriptor desc;
+ int err = 0;
+
+ if (fid == DUMMY_FID)
+ return; /* Nothing's really happened */
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
+ "(FID=%04X error %d)\n",
+ dev->name, fid, err);
+ } else {
+ DEBUG(1, "%s: Tx error, status %d\n",
+ dev->name, le16_to_cpu(desc.status));
+ }
+
+ stats->tx_errors++;
+
+ netif_wake_queue(dev);
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void orinoco_tx_timeout(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct hermes *hw = &priv->hw;
+
+ printk(KERN_WARNING "%s: Tx timeout! "
+ "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
+ dev->name, hermes_read_regn(hw, ALLOCFID),
+ hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
+
+ stats->tx_errors++;
+
+ schedule_work(&priv->reset_work);
+}
+
+/********************************************************************/
+/* Rx path (data frames) */
+/********************************************************************/
+
+/* Does the frame have a SNAP header indicating it should be
+ * de-encapsulated to Ethernet-II? */
+static inline int is_ethersnap(void *_hdr)
+{
+ u8 *hdr = _hdr;
+
+ /* We de-encapsulate all packets which, a) have SNAP headers
+ * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
+ * and where b) the OUI of the SNAP header is 00:00:00 or
+ * 00:00:f8 - we need both because different APs appear to use
+ * different OUIs for some reason */
+ return (memcmp(hdr, &encaps_hdr, 5) == 0)
+ && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
+}
+
+static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
+ int level, int noise)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int i;
+
+ /* Gather wireless spy statistics: for each packet, compare the
+ * source address with out list, and if match, get the stats... */
+ for (i = 0; i < priv->spy_number; i++)
+ if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
+ priv->spy_stat[i].level = level - 0x95;
+ priv->spy_stat[i].noise = noise - 0x95;
+ priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
+ priv->spy_stat[i].updated = 7;
+ }
+}
+
+static void orinoco_stat_gather(struct net_device *dev,
+ struct sk_buff *skb,
+ struct hermes_rx_descriptor *desc)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ /* Using spy support with lots of Rx packets, like in an
+ * infrastructure (AP), will really slow down everything, because
+ * the MAC address must be compared to each entry of the spy list.
+ * If the user really asks for it (set some address in the
+ * spy list), we do it, but he will pay the price.
+ * Note that to get here, you need both WIRELESS_SPY
+ * compiled in AND some addresses in the list !!!
+ */
+ /* Note : gcc will optimise the whole section away if
+ * WIRELESS_SPY is not defined... - Jean II */
+ if (SPY_NUMBER(priv)) {
+ orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN,
+ desc->signal, desc->silence);
+ }
+}
+
+static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct iw_statistics *wstats = &priv->wstats;
+ struct sk_buff *skb = NULL;
+ u16 rxfid, status;
+ int length, data_len, data_off;
+ char *p;
+ struct hermes_rx_descriptor desc;
+ struct header_struct hdr;
+ struct ethhdr *eh;
+ int err;
+
+ rxfid = hermes_read_regn(hw, RXFID);
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
+ rxfid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading Rx descriptor. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ status = le16_to_cpu(desc.status);
+
+ if (status & HERMES_RXSTAT_ERR) {
+ if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+ wstats->discard.code++;
+ DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ dev->name);
+ } else {
+ stats->rx_crc_errors++;
+ DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
+ }
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ /* For now we ignore the 802.11 header completely, assuming
+ that the card's firmware has handled anything vital */
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
+ rxfid, HERMES_802_3_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame header. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ length = ntohs(hdr.len);
+
+ /* Sanity checks */
+ if (length < 3) { /* No for even an 802.2 LLC header */
+ /* At least on Symbol firmware with PCF we get quite a
+ lot of these legitimately - Poll frames with no
+ data. */
+ stats->rx_dropped++;
+ goto drop;
+ }
+ if (length > IEEE802_11_DATA_LEN) {
+ printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
+ dev->name, length);
+ stats->rx_length_errors++;
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ /* We need space for the packet data itself, plus an ethernet
+ header, plus 2 bytes so we can align the IP header on a
+ 32bit boundary, plus 1 byte so we can read in odd length
+ packets from the card, which has an IO granularity of 16
+ bits */
+ skb = dev_alloc_skb(length+ETH_HLEN+2+1);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+ dev->name);
+ goto drop;
+ }
+
+ skb_reserve(skb, 2); /* This way the IP header is aligned */
+
+ /* Handle decapsulation
+ * In most cases, the firmware tell us about SNAP frames.
+ * For some reason, the SNAP frames sent by LinkSys APs
+ * are not properly recognised by most firmwares.
+ * So, check ourselves */
+ if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+ ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+ is_ethersnap(&hdr)) {
+ /* These indicate a SNAP within 802.2 LLC within
+ 802.11 frame which we'll need to de-encapsulate to
+ the original EthernetII frame. */
+
+ if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
+ stats->rx_length_errors++;
+ goto drop;
+ }
+
+ /* Remove SNAP header, reconstruct EthernetII frame */
+ data_len = length - ENCAPS_OVERHEAD;
+ data_off = HERMES_802_3_OFFSET + sizeof(hdr);
+
+ eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
+
+ memcpy(eh, &hdr, 2 * ETH_ALEN);
+ eh->h_proto = hdr.ethertype;
+ } else {
+ /* All other cases indicate a genuine 802.3 frame. No
+ decapsulation needed. We just throw the whole
+ thing in, and hope the protocol layer can deal with
+ it as 802.3 */
+ data_len = length;
+ data_off = HERMES_802_3_OFFSET;
+ /* FIXME: we re-read from the card data we already read here */
+ }
+
+ p = skb_put(skb, data_len);
+ err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
+ rxfid, data_off);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ dev->last_rx = jiffies;
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Process the wireless stats if needed */
+ orinoco_stat_gather(dev, skb, &desc);
+
+ /* Pass the packet to the networking stack */
+ netif_rx(skb);
+ stats->rx_packets++;
+ stats->rx_bytes += length;
+
+ return;
+
+ drop:
+ stats->rx_dropped++;
+
+ if (skb)
+ dev_kfree_skb_irq(skb);
+ return;
+}
+
+/********************************************************************/
+/* Rx path (info frames) */
+/********************************************************************/
+
+static void print_linkstatus(struct net_device *dev, u16 status)
+{
+ char * s;
+
+ if (suppress_linkstatus)
+ return;
+
+ switch (status) {
+ case HERMES_LINKSTATUS_NOT_CONNECTED:
+ s = "Not Connected";
+ break;
+ case HERMES_LINKSTATUS_CONNECTED:
+ s = "Connected";
+ break;
+ case HERMES_LINKSTATUS_DISCONNECTED:
+ s = "Disconnected";
+ break;
+ case HERMES_LINKSTATUS_AP_CHANGE:
+ s = "AP Changed";
+ break;
+ case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
+ s = "AP Out of Range";
+ break;
+ case HERMES_LINKSTATUS_AP_IN_RANGE:
+ s = "AP In Range";
+ break;
+ case HERMES_LINKSTATUS_ASSOC_FAILED:
+ s = "Association Failed";
+ break;
+ default:
+ s = "UNKNOWN";
+ }
+
+ printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+ dev->name, s, status);
+}
+
+static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 infofid;
+ struct {
+ u16 len;
+ u16 type;
+ } __attribute__ ((packed)) info;
+ int len, type;
+ int err;
+
+ /* This is an answer to an INQUIRE command that we did earlier,
+ * or an information "event" generated by the card
+ * The controller return to us a pseudo frame containing
+ * the information in question - Jean II */
+ infofid = hermes_read_regn(hw, INFOFID);
+
+ /* Read the info frame header - don't try too hard */
+ err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
+ infofid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading info frame. "
+ "Frame dropped.\n", dev->name, err);
+ return;
+ }
+
+ len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
+ type = le16_to_cpu(info.type);
+
+ switch (type) {
+ case HERMES_INQ_TALLIES: {
+ struct hermes_tallies_frame tallies;
+ struct iw_statistics *wstats = &priv->wstats;
+
+ if (len > sizeof(tallies)) {
+ printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
+ dev->name, len);
+ len = sizeof(tallies);
+ }
+
+ /* Read directly the data (no seek) */
+ hermes_read_words(hw, HERMES_DATA1, (void *) &tallies,
+ len / 2); /* FIXME: blech! */
+
+ /* Increment our various counters */
+ /* wstats->discard.nwid - no wrong BSSID stuff */
+ wstats->discard.code +=
+ le16_to_cpu(tallies.RxWEPUndecryptable);
+ if (len == sizeof(tallies))
+ wstats->discard.code +=
+ le16_to_cpu(tallies.RxDiscards_WEPICVError) +
+ le16_to_cpu(tallies.RxDiscards_WEPExcluded);
+ wstats->discard.misc +=
+ le16_to_cpu(tallies.TxDiscardsWrongSA);
+ wstats->discard.fragment +=
+ le16_to_cpu(tallies.RxMsgInBadMsgFragments);
+ wstats->discard.retries +=
+ le16_to_cpu(tallies.TxRetryLimitExceeded);
+ /* wstats->miss.beacon - no match */
+ }
+ break;
+ case HERMES_INQ_LINKSTATUS: {
+ struct hermes_linkstatus linkstatus;
+ u16 newstatus;
+ int connected;
+
+ if (len != sizeof(linkstatus)) {
+ printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus,
+ len / 2);
+ newstatus = le16_to_cpu(linkstatus.linkstatus);
+
+ connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
+ || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
+ || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
+
+ if (connected)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+
+ if (newstatus != priv->last_linkstatus)
+ print_linkstatus(dev, newstatus);
+
+ priv->last_linkstatus = newstatus;
+ }
+ break;
+ default:
+ printk(KERN_DEBUG "%s: Unknown information frame received: "
+ "type 0x%04x, length %d\n", dev->name, type, len);
+ /* We don't actually do anything about it */
+ break;
+ }
+}
+
+static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
+{
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
+}
+
+/********************************************************************/
+/* Internal hardware control routines */
+/********************************************************************/
+
+int __orinoco_up(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d configuring card\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Fire things up again */
+ hermes_set_irqmask(hw, ORINOCO_INTEN);
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d enabling MAC port\n",
+ dev->name, err);
+ return err;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+int __orinoco_down(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ netif_stop_queue(dev);
+
+ if (! priv->hw_unavailable) {
+ if (! priv->broken_disableport) {
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ /* Some firmwares (e.g. Intersil 1.3.x) seem
+ * to have problems disabling the port, oh
+ * well, too bad. */
+ printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
+ dev->name, err);
+ priv->broken_disableport = 1;
+ }
+ }
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+ }
+
+ /* firmware will have to reassociate */
+ netif_carrier_off(dev);
+ priv->last_linkstatus = 0xffff;
+
+ return 0;
+}
+
+int orinoco_reinit_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = hermes_init(hw);
+ if (err)
+ return err;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO) {
+ /* Try workaround for old Symbol firmware bug */
+ printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+ "(old Symbol firmware?). Trying to work around... ",
+ dev->name);
+
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err)
+ printk("failed!\n");
+ else
+ printk("ok.\n");
+ }
+
+ return err;
+}
+
+static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
+ printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
+ priv->ndev->name, priv->bitratemode);
+ return -EINVAL;
+ }
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].agere_txratectrl);
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].intersil_txratectrl);
+ break;
+ default:
+ BUG();
+ }
+
+ return err;
+}
+
+/* Change the WEP keys and/or the current keys. Can be called
+ * either from __orinoco_hw_setup_wep() or directly from
+ * orinoco_ioctl_setiwencode(). In the later case the association
+ * with the AP is not broken (if the firmware can handle it),
+ * which is needed for 802.1x implementations. */
+static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFWEPKEYS_AGERE,
+ &priv->keys);
+ if (err)
+ return err;
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXKEY_AGERE,
+ priv->tx_key);
+ if (err)
+ return err;
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ {
+ int keylen;
+ int i;
+
+ /* Force uniform key length to work around firmware bugs */
+ keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
+
+ if (keylen > LARGE_KEY_SIZE) {
+ printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
+ priv->ndev->name, priv->tx_key, keylen);
+ return -E2BIG;
+ }
+
+ /* Write all 4 keys */
+ for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFDEFAULTKEY0 + i,
+ HERMES_BYTES_TO_RECLEN(keylen),
+ priv->keys[i].data);
+ if (err)
+ return err;
+ }
+
+ /* Write the index of the key used in transmission */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPDEFAULTKEYID,
+ priv->tx_key);
+ if (err)
+ return err;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int master_wep_flag;
+ int auth_flag;
+
+ if (priv->wep_on)
+ __orinoco_hw_setup_wepkeys(priv);
+
+ if (priv->wep_restrict)
+ auth_flag = HERMES_AUTH_SHARED_KEY;
+ else
+ auth_flag = HERMES_AUTH_OPEN;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
+ if (priv->wep_on) {
+ /* Enable the shared-key authentication. */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION_AGERE,
+ auth_flag);
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPENABLED_AGERE,
+ priv->wep_on);
+ if (err)
+ return err;
+ break;
+
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
+ if (priv->wep_on) {
+ if (priv->wep_restrict ||
+ (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
+ master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
+ HERMES_WEP_EXCL_UNENCRYPTED;
+ else
+ master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION,
+ auth_flag);
+ if (err)
+ return err;
+ } else
+ master_wep_flag = 0;
+
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
+
+ /* Master WEP setting : on/off */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPFLAGS_INTERSIL,
+ master_wep_flag);
+ if (err)
+ return err;
+
+ break;
+ }
+
+ return 0;
+}
+
+static int __orinoco_program_rids(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct hermes_idstring idbuf;
+
+ /* Set the MAC address */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting MAC address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set up the link mode */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+ priv->port_type);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting port type\n",
+ dev->name, err);
+ return err;
+ }
+ /* Set the channel/frequency */
+ if (priv->channel == 0) {
+ printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
+ if (priv->createibss)
+ priv->channel = 10;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel\n",
+ dev->name, err);
+ return err;
+ }
+
+ if (priv->has_ibss) {
+ u16 createibss;
+
+ if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
+ printk(KERN_WARNING "%s: This firmware requires an "
+ "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+ /* With wvlan_cs, in this case, we would crash.
+ * hopefully, this driver will behave better...
+ * Jean II */
+ createibss = 0;
+ } else {
+ createibss = priv->createibss;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFCREATEIBSS,
+ createibss);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set the desired ESSID */
+ idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+ memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+ /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the station name */
+ idbuf.len = cpu_to_le16(strlen(priv->nick));
+ memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting nickname\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set AP density */
+ if (priv->has_sensitivity) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE,
+ priv->ap_density);
+ if (err) {
+ printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
+ "Disabling sensitivity control\n",
+ dev->name, err);
+
+ priv->has_sensitivity = 0;
+ }
+ }
+
+ /* Set RTS threshold */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set fragmentation threshold or MWO robustness */
+ if (priv->has_mwo)
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ priv->mwo_robust);
+ else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set bitrate */
+ err = __orinoco_hw_set_bitrate(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting bitrate\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set power management */
+ if (priv->has_pm) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMENABLED,
+ priv->pm_on);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMULTICASTRECEIVE,
+ priv->pm_mcast);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set preamble - only for Symbol so far... */
+ if (priv->has_preamble) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ priv->preamble);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting preamble\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set up encryption */
+ if (priv->has_wep) {
+ err = __orinoco_hw_setup_wep(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d activating WEP\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set promiscuity / multicast*/
+ priv->promiscuous = 0;
+ priv->mc_count = 0;
+ __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */
+
+ return 0;
+}
+
+/* FIXME: return int? */
+static void
+__orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int promisc, mc_count;
+
+ /* The Hermes doesn't seem to have an allmulti mode, so we go
+ * into promiscuous mode and let the upper levels deal. */
+ if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
+ (dev->mc_count > MAX_MULTICAST(priv)) ) {
+ promisc = 1;
+ mc_count = 0;
+ } else {
+ promisc = 0;
+ mc_count = dev->mc_count;
+ }
+
+ if (promisc != priv->promiscuous) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPROMISCUOUSMODE,
+ promisc);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
+ dev->name, err);
+ } else
+ priv->promiscuous = promisc;
+ }
+
+ if (! promisc && (mc_count || priv->mc_count) ) {
+ struct dev_mc_list *p = dev->mc_list;
+ struct hermes_multicast mclist;
+ int i;
+
+ for (i = 0; i < mc_count; i++) {
+ /* paranoia: is list shorter than mc_count? */
+ BUG_ON(! p);
+ /* paranoia: bad address size in list? */
+ BUG_ON(p->dmi_addrlen != ETH_ALEN);
+
+ memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
+ p = p->next;
+ }
+
+ if (p)
+ printk(KERN_WARNING "%s: Multicast list is "
+ "longer than mc_count\n", dev->name);
+
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
+ HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
+ &mclist);
+ if (err)
+ printk(KERN_ERR "%s: Error %d setting multicast list.\n",
+ dev->name, err);
+ else
+ priv->mc_count = mc_count;
+ }
+
+ /* Since we can set the promiscuous flag when it wasn't asked
+ for, make sure the net_device knows about it. */
+ if (priv->promiscuous)
+ dev->flags |= IFF_PROMISC;
+ else
+ dev->flags &= ~IFF_PROMISC;
+}
+
+static int orinoco_reconfigure(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ unsigned long flags;
+ int err = 0;
+
+ if (priv->broken_disableport) {
+ schedule_work(&priv->reset_work);
+ return 0;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
+ dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
+
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
+
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
+
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return err;
+
+}
+
+/* This must be called from user context, without locks held - use
+ * schedule_work() */
+static void orinoco_reset(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ /* When the hardware becomes available again, whatever
+ * detects that is responsible for re-initializing
+ * it. So no need for anything further */
+ return;
+
+ netif_stop_queue(dev);
+
+ /* Shut off interrupts. Depending on what state the hardware
+ * is in, this might not work, but we'll try anyway */
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+
+ priv->hw_unavailable++;
+ priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
+ netif_carrier_off(dev);
+
+ orinoco_unlock(priv, &flags);
+
+ if (priv->hard_reset)
+ err = (*priv->hard_reset)(priv);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d "
+ "performing hard reset\n", dev->name, err);
+ /* FIXME: shutdown of some sort */
+ return;
+ }
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
+ dev->name, err);
+ return;
+ }
+
+ spin_lock_irq(&priv->lock); /* This has to be called from user context */
+
+ priv->hw_unavailable--;
+
+ /* priv->open or priv->hw_unavailable might have changed while
+ * we dropped the lock */
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
+ dev->name, err);
+ } else
+ dev->trans_start = jiffies;
+ }
+
+ spin_unlock_irq(&priv->lock);
+
+ return;
+}
+
+/********************************************************************/
+/* Interrupt handler */
+/********************************************************************/
+
+static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
+{
+ printk(KERN_DEBUG "%s: TICK\n", dev->name);
+}
+
+static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
+{
+ /* This seems to happen a fair bit under load, but ignoring it
+ seems to work fine...*/
+ printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
+ dev->name);
+}
+
+irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int count = MAX_IRQLOOPS_PER_IRQ;
+ u16 evstat, events;
+ /* These are used to detect a runaway interrupt situation */
+ /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
+ * we panic and shut down the hardware */
+ static int last_irq_jiffy = 0; /* jiffies value the last time
+ * we were called */
+ static int loops_this_jiffy = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ /* If hw is unavailable - we don't know if the irq was
+ * for us or not */
+ return IRQ_HANDLED;
+ }
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ if (! events) {
+ orinoco_unlock(priv, &flags);
+ return IRQ_NONE;
+ }
+
+ if (jiffies != last_irq_jiffy)
+ loops_this_jiffy = 0;
+ last_irq_jiffy = jiffies;
+
+ while (events && count--) {
+ if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
+ printk(KERN_WARNING "%s: IRQ handler is looping too "
+ "much! Resetting.\n", dev->name);
+ /* Disable interrupts for now */
+ hermes_set_irqmask(hw, 0);
+ schedule_work(&priv->reset_work);
+ break;
+ }
+
+ /* Check the card hasn't been removed */
+ if (! hermes_present(hw)) {
+ DEBUG(0, "orinoco_interrupt(): card removed\n");
+ break;
+ }
+
+ if (events & HERMES_EV_TICK)
+ __orinoco_ev_tick(dev, hw);
+ if (events & HERMES_EV_WTERR)
+ __orinoco_ev_wterr(dev, hw);
+ if (events & HERMES_EV_INFDROP)
+ __orinoco_ev_infdrop(dev, hw);
+ if (events & HERMES_EV_INFO)
+ __orinoco_ev_info(dev, hw);
+ if (events & HERMES_EV_RX)
+ __orinoco_ev_rx(dev, hw);
+ if (events & HERMES_EV_TXEXC)
+ __orinoco_ev_txexc(dev, hw);
+ if (events & HERMES_EV_TX)
+ __orinoco_ev_tx(dev, hw);
+ if (events & HERMES_EV_ALLOC)
+ __orinoco_ev_alloc(dev, hw);
+
+ hermes_write_regn(hw, EVACK, events);
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ };
+
+ orinoco_unlock(priv, &flags);
+ return IRQ_HANDLED;
+}
+
+/********************************************************************/
+/* Initialization */
+/********************************************************************/
+
+struct comp_id {
+ u16 id, variant, major, minor;
+} __attribute__ ((packed));
+
+static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
+{
+ if (nic_id->id < 0x8000)
+ return FIRMWARE_TYPE_AGERE;
+ else if (nic_id->id == 0x8000 && nic_id->major == 0)
+ return FIRMWARE_TYPE_SYMBOL;
+ else
+ return FIRMWARE_TYPE_INTERSIL;
+}
+
+/* Set priv->firmware type, determine firmware properties */
+static int determine_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct comp_id nic_id, sta_id;
+ unsigned int firmver;
+ char tmp[SYMBOL_MAX_VER_LEN+1];
+
+ /* Get the hardware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
+ dev->name, err);
+ return err;
+ }
+
+ le16_to_cpus(&nic_id.id);
+ le16_to_cpus(&nic_id.variant);
+ le16_to_cpus(&nic_id.major);
+ le16_to_cpus(&nic_id.minor);
+ printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
+ dev->name, nic_id.id, nic_id.variant,
+ nic_id.major, nic_id.minor);
+
+ priv->firmware_type = determine_firmware_type(&nic_id);
+
+ /* Get the firmware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
+ dev->name, err);
+ return err;
+ }
+
+ le16_to_cpus(&sta_id.id);
+ le16_to_cpus(&sta_id.variant);
+ le16_to_cpus(&sta_id.major);
+ le16_to_cpus(&sta_id.minor);
+ printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
+ dev->name, sta_id.id, sta_id.variant,
+ sta_id.major, sta_id.minor);
+
+ switch (sta_id.id) {
+ case 0x15:
+ printk(KERN_ERR "%s: Primary firmware is active\n",
+ dev->name);
+ return -ENODEV;
+ case 0x14b:
+ printk(KERN_ERR "%s: Tertiary firmware is active\n",
+ dev->name);
+ return -ENODEV;
+ case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
+ case 0x21: /* Symbol Spectrum24 Trilogy */
+ break;
+ default:
+ printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
+ dev->name);
+ break;
+ }
+
+ /* Default capabilities */
+ priv->has_sensitivity = 1;
+ priv->has_mwo = 0;
+ priv->has_preamble = 0;
+ priv->has_port3 = 1;
+ priv->has_ibss = 1;
+ priv->has_wep = 0;
+ priv->has_big_wep = 0;
+
+ /* Determine capabilities from the firmware version */
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
+ ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+
+ firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
+
+ priv->has_ibss = (firmver >= 0x60006);
+ priv->has_wep = (firmver >= 0x40020);
+ priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
+ Gold cards from the others? */
+ priv->has_mwo = (firmver >= 0x60000);
+ priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
+ priv->ibss_port = 1;
+
+ /* Tested with Agere firmware :
+ * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
+ * Tested CableTron firmware : 4.32 => Anton */
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
+ /* Intel MAC : 00:02:B3:* */
+ /* 3Com MAC : 00:50:DA:* */
+ memset(tmp, 0, sizeof(tmp));
+ /* Get the Symbol firmware version */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SECONDARYVERSION_SYMBOL,
+ SYMBOL_MAX_VER_LEN, NULL, &tmp);
+ if (err) {
+ printk(KERN_WARNING
+ "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
+ dev->name, err);
+ firmver = 0;
+ tmp[0] = '\0';
+ } else {
+ /* The firmware revision is a string, the format is
+ * something like : "V2.20-01".
+ * Quick and dirty parsing... - Jean II
+ */
+ firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
+ | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
+ | (tmp[7] - '0');
+
+ tmp[SYMBOL_MAX_VER_LEN] = '\0';
+ }
+
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Symbol %s", tmp);
+
+ priv->has_ibss = (firmver >= 0x20000);
+ priv->has_wep = (firmver >= 0x15012);
+ priv->has_big_wep = (firmver >= 0x20000);
+ priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
+ (firmver >= 0x29000 && firmver < 0x30000) ||
+ firmver >= 0x31000;
+ priv->has_preamble = (firmver >= 0x20000);
+ priv->ibss_port = 4;
+ /* Tested with Intel firmware : 0x20015 => Jean II */
+ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ /* D-Link, Linksys, Adtron, ZoomAir, and many others...
+ * Samsung, Compaq 100/200 and Proxim are slightly
+ * different and less well tested */
+ /* D-Link MAC : 00:40:05:* */
+ /* Addtron MAC : 00:90:D1:* */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
+ sta_id.variant);
+
+ firmver = ((unsigned long)sta_id.major << 16) |
+ ((unsigned long)sta_id.minor << 8) | sta_id.variant;
+
+ priv->has_ibss = (firmver >= 0x000700); /* FIXME */
+ priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
+ priv->has_pm = (firmver >= 0x000700);
+
+ if (firmver >= 0x000800)
+ priv->ibss_port = 0;
+ else {
+ printk(KERN_NOTICE "%s: Intersil firmware earlier "
+ "than v0.8.x - several features not supported\n",
+ dev->name);
+ priv->ibss_port = 1;
+ }
+ break;
+ }
+ printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
+ priv->fw_name);
+
+ return 0;
+}
+
+static int orinoco_init(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring nickbuf;
+ u16 reclen;
+ int len;
+
+ TRACE_ENTER(dev->name);
+
+ /* No need to lock, the hw_unavailable flag is already set in
+ * alloc_orinocodev() */
+ priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;
+
+ /* Initialize the firmware */
+ err = hermes_init(hw);
+ if (err != 0) {
+ printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
+ dev->name, err);
+ goto out;
+ }
+
+ err = determine_firmware(dev);
+ if (err != 0) {
+ printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+ dev->name);
+ goto out;
+ }
+
+ if (priv->has_port3)
+ printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
+ if (priv->has_ibss)
+ printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
+ dev->name);
+ if (priv->has_wep) {
+ printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
+ if (priv->has_big_wep)
+ printk("104-bit key\n");
+ else
+ printk("40-bit key\n");
+ }
+
+ /* Get the MAC address */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ ETH_ALEN, NULL, dev->dev_addr);
+ if (err) {
+ printk(KERN_WARNING "%s: failed to read MAC address!\n",
+ dev->name);
+ goto out;
+ }
+
+ printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n",
+ dev->name, dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4],
+ dev->dev_addr[5]);
+
+ /* Get the station name */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ sizeof(nickbuf), &reclen, &nickbuf);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read station name\n",
+ dev->name);
+ goto out;
+ }
+ if (nickbuf.len)
+ len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
+ else
+ len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
+ memcpy(priv->nick, &nickbuf.val, len);
+ priv->nick[len] = '\0';
+
+ printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
+
+ /* Get allowed channels */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
+ &priv->channel_mask);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read channel list!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get initial AP density */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
+ &priv->ap_density);
+ if (err || priv->ap_density < 1 || priv->ap_density > 3) {
+ priv->has_sensitivity = 0;
+ }
+
+ /* Get initial RTS threshold */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ &priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read RTS threshold!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get initial fragmentation settings */
+ if (priv->has_mwo)
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &priv->mwo_robust);
+ else
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Power management setup */
+ if (priv->has_pm) {
+ priv->pm_on = 0;
+ priv->pm_mcast = 1;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ &priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read power management period!\n",
+ dev->name);
+ goto out;
+ }
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ &priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read power management timeout!\n",
+ dev->name);
+ goto out;
+ }
+ }
+
+ /* Preamble setup */
+ if (priv->has_preamble) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ &priv->preamble);
+ if (err)
+ goto out;
+ }
+
+ /* Set up the default configuration */
+ priv->iw_mode = IW_MODE_INFRA;
+ /* By default use IEEE/IBSS ad-hoc mode if we have it */
+ priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
+ set_port_type(priv);
+ priv->channel = 10; /* default channel, more-or-less arbitrary */
+
+ priv->promiscuous = 0;
+ priv->wep_on = 0;
+ priv->tx_key = 0;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO) {
+ /* Try workaround for old Symbol firmware bug */
+ printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+ "(old Symbol firmware?). Trying to work around... ",
+ dev->name);
+
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err)
+ printk("failed!\n");
+ else
+ printk("ok.\n");
+ }
+ if (err) {
+ printk("%s: Error %d allocating Tx buffer\n", dev->name, err);
+ goto out;
+ }
+
+ /* Make the hardware available, as long as it hasn't been
+ * removed elsewhere (e.g. by PCMCIA hot unplug) */
+ spin_lock_irq(&priv->lock);
+ priv->hw_unavailable--;
+ spin_unlock_irq(&priv->lock);
+
+ printk(KERN_DEBUG "%s: ready\n", dev->name);
+
+ out:
+ TRACE_EXIT(dev->name);
+ return err;
+}
+
+struct net_device *alloc_orinocodev(int sizeof_card,
+ int (*hard_reset)(struct orinoco_private *))
+{
+ struct net_device *dev;
+ struct orinoco_private *priv;
+
+ dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
+ if (! dev)
+ return NULL;
+ priv = netdev_priv(dev);
+ priv->ndev = dev;
+ if (sizeof_card)
+ priv->card = (void *)((unsigned long)netdev_priv(dev)
+ + sizeof(struct orinoco_private));
+ else
+ priv->card = NULL;
+
+ /* Setup / override net_device fields */
+ dev->init = orinoco_init;
+ dev->hard_start_xmit = orinoco_xmit;
+ dev->tx_timeout = orinoco_tx_timeout;
+ dev->watchdog_timeo = HZ; /* 1 second timeout */
+ dev->get_stats = orinoco_get_stats;
+ dev->get_wireless_stats = orinoco_get_wireless_stats;
+ dev->do_ioctl = orinoco_ioctl;
+ dev->change_mtu = orinoco_change_mtu;
+ dev->set_multicast_list = orinoco_set_multicast_list;
+ /* we use the default eth_mac_addr for setting the MAC addr */
+
+ /* Set up default callbacks */
+ dev->open = orinoco_open;
+ dev->stop = orinoco_stop;
+ priv->hard_reset = hard_reset;
+
+ spin_lock_init(&priv->lock);
+ priv->open = 0;
+ priv->hw_unavailable = 1; /* orinoco_init() must clear this
+ * before anything else touches the
+ * hardware */
+ INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
+
+ netif_carrier_off(dev);
+ priv->last_linkstatus = 0xffff;
+
+ return dev;
+
+}
+
+void free_orinocodev(struct net_device *dev)
+{
+ free_netdev(dev);
+}
+
+/********************************************************************/
+/* Wireless extensions */
+/********************************************************************/
+
+static int orinoco_hw_get_bssid(struct orinoco_private *priv,
+ char buf[ETH_ALEN])
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, buf);
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
+ char buf[IW_ESSID_MAX_SIZE+1])
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring essidbuf;
+ char *p = (char *)(&essidbuf.val);
+ int len;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (strlen(priv->desired_essid) > 0) {
+ /* We read the desired SSID from the hardware rather
+ than from priv->desired_essid, just in case the
+ firmware is allowed to change it on us. I'm not
+ sure about this */
+ /* My guess is that the OWNSSID should always be whatever
+ * we set to the card, whereas CURRENT_SSID is the one that
+ * may change... - Jean II */
+ u16 rid;
+
+ *active = 1;
+
+ rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
+ HERMES_RID_CNFDESIREDSSID;
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+ NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ } else {
+ *active = 0;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+ sizeof(essidbuf), NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ }
+
+ len = le16_to_cpu(essidbuf.len);
+
+ memset(buf, 0, IW_ESSID_MAX_SIZE+1);
+ memcpy(buf, p, len);
+ buf[len] = '\0';
+
+ fail_unlock:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static long orinoco_hw_get_freq(struct orinoco_private *priv)
+{
+
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 channel;
+ long freq = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
+ if (err)
+ goto out;
+
+ /* Intersil firmware 1.3.5 returns 0 when the interface is down */
+ if (channel == 0) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
+ printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
+ priv->ndev->name, channel);
+ err = -EBUSY;
+ goto out;
+
+ }
+ freq = channel_frequency[channel-1] * 100000;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ if (err > 0)
+ err = -EBUSY;
+ return err ? err : freq;
+}
+
+static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
+ int *numrates, s32 *rates, int max)
+{
+ hermes_t *hw = &priv->hw;
+ struct hermes_idstring list;
+ unsigned char *p = (unsigned char *)&list.val;
+ int err = 0;
+ int num;
+ int i;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+ sizeof(list), NULL, &list);
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return err;
+
+ num = le16_to_cpu(list.len);
+ *numrates = num;
+ num = min(num, max);
+
+ for (i = 0; i < num; i++) {
+ rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ int mode;
+ struct iw_range range;
+ int numrates;
+ int i, k;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range)))
+ return -EFAULT;
+
+ rrq->length = sizeof(range);
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ mode = priv->iw_mode;
+ orinoco_unlock(priv, &flags);
+
+ memset(&range, 0, sizeof(range));
+
+ /* Much of this shamelessly taken from wvlan_cs.c. No idea
+ * what it all means -dgibson */
+ range.we_version_compiled = WIRELESS_EXT;
+ range.we_version_source = 11;
+
+ range.min_nwid = range.max_nwid = 0; /* We don't use nwids */
+
+ /* Set available channels/frequencies */
+ range.num_channels = NUM_CHANNELS;
+ k = 0;
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (priv->channel_mask & (1 << i)) {
+ range.freq[k].i = i + 1;
+ range.freq[k].m = channel_frequency[i] * 100000;
+ range.freq[k].e = 1;
+ k++;
+ }
+
+ if (k >= IW_MAX_FREQUENCIES)
+ break;
+ }
+ range.num_frequency = k;
+
+ range.sensitivity = 3;
+
+ if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
+ /* Quality stats meaningless in ad-hoc mode */
+ range.max_qual.qual = 0;
+ range.max_qual.level = 0;
+ range.max_qual.noise = 0;
+ range.avg_qual.qual = 0;
+ range.avg_qual.level = 0;
+ range.avg_qual.noise = 0;
+ } else {
+ range.max_qual.qual = 0x8b - 0x2f;
+ range.max_qual.level = 0x2f - 0x95 - 1;
+ range.max_qual.noise = 0x2f - 0x95 - 1;
+ /* Need to get better values */
+ range.avg_qual.qual = 0x24;
+ range.avg_qual.level = 0xC2;
+ range.avg_qual.noise = 0x9E;
+ }
+
+ err = orinoco_hw_get_bitratelist(priv, &numrates,
+ range.bitrate, IW_MAX_BITRATES);
+ if (err)
+ return err;
+ range.num_bitrates = numrates;
+
+ /* Set an indication of the max TCP throughput in bit/s that we can
+ * expect using this interface. May be use for QoS stuff...
+ * Jean II */
+ if(numrates > 2)
+ range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
+ else
+ range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
+
+ range.min_rts = 0;
+ range.max_rts = 2347;
+ range.min_frag = 256;
+ range.max_frag = 2346;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ if (priv->has_wep) {
+ range.max_encoding_tokens = ORINOCO_MAX_KEYS;
+
+ range.encoding_size[0] = SMALL_KEY_SIZE;
+ range.num_encoding_sizes = 1;
+
+ if (priv->has_big_wep) {
+ range.encoding_size[1] = LARGE_KEY_SIZE;
+ range.num_encoding_sizes = 2;
+ }
+ } else {
+ range.num_encoding_sizes = 0;
+ range.max_encoding_tokens = 0;
+ }
+ orinoco_unlock(priv, &flags);
+
+ range.min_pmp = 0;
+ range.max_pmp = 65535000;
+ range.min_pmt = 0;
+ range.max_pmt = 65535 * 1000; /* ??? */
+ range.pmp_flags = IW_POWER_PERIOD;
+ range.pmt_flags = IW_POWER_TIMEOUT;
+ range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
+
+ range.num_txpower = 1;
+ range.txpower[0] = 15; /* 15dBm */
+ range.txpower_capa = IW_TXPOW_DBM;
+
+ range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range.retry_flags = IW_RETRY_LIMIT;
+ range.r_time_flags = IW_RETRY_LIFETIME;
+ range.min_retry = 0;
+ range.max_retry = 65535; /* ??? */
+ range.min_r_time = 0;
+ range.max_r_time = 65535 * 1000; /* ??? */
+
+ if (copy_to_user(rrq->pointer, &range, sizeof(range)))
+ return -EFAULT;
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ int setindex = priv->tx_key;
+ int enable = priv->wep_on;
+ int restricted = priv->wep_restrict;
+ u16 xlen = 0;
+ int err = 0;
+ char keybuf[ORINOCO_MAX_KEY_SIZE];
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (erq->pointer) {
+ /* We actually have a key to set - check its length */
+ if (erq->length > LARGE_KEY_SIZE)
+ return -E2BIG;
+
+ if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
+ return -E2BIG;
+
+ if (copy_from_user(keybuf, erq->pointer, erq->length))
+ return -EFAULT;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (erq->pointer) {
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ /* Adjust key length to a supported value */
+ if (erq->length > SMALL_KEY_SIZE) {
+ xlen = LARGE_KEY_SIZE;
+ } else if (erq->length > 0) {
+ xlen = SMALL_KEY_SIZE;
+ } else
+ xlen = 0;
+
+ /* Switch on WEP if off */
+ if ((!enable) && (xlen > 0)) {
+ setindex = index;
+ enable = 1;
+ }
+ } else {
+ /* Important note : if the user do "iwconfig eth0 enc off",
+ * we will arrive there with an index of -1. This is valid
+ * but need to be taken care off... Jean II */
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
+ if((index != -1) || (erq->flags == 0)) {
+ err = -EINVAL;
+ goto out;
+ }
+ } else {
+ /* Set the index : Check that the key is valid */
+ if(priv->keys[index].len == 0) {
+ err = -EINVAL;
+ goto out;
+ }
+ setindex = index;
+ }
+ }
+
+ if (erq->flags & IW_ENCODE_DISABLED)
+ enable = 0;
+ if (erq->flags & IW_ENCODE_OPEN)
+ restricted = 0;
+ if (erq->flags & IW_ENCODE_RESTRICTED)
+ restricted = 1;
+
+ if (erq->pointer) {
+ priv->keys[index].len = cpu_to_le16(xlen);
+ memset(priv->keys[index].data, 0,
+ sizeof(priv->keys[index].data));
+ memcpy(priv->keys[index].data, keybuf, erq->length);
+ }
+ priv->tx_key = setindex;
+
+ /* Try fast key change if connected and only keys are changed */
+ if (priv->wep_on && enable && (priv->wep_restrict == restricted) &&
+ netif_carrier_ok(dev)) {
+ err = __orinoco_hw_setup_wepkeys(priv);
+ /* No need to commit if successful */
+ goto out;
+ }
+
+ priv->wep_on = enable;
+ priv->wep_restrict = restricted;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ u16 xlen = 0;
+ char keybuf[ORINOCO_MAX_KEY_SIZE];
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ erq->flags = 0;
+ if (! priv->wep_on)
+ erq->flags |= IW_ENCODE_DISABLED;
+ erq->flags |= index + 1;
+
+ if (priv->wep_restrict)
+ erq->flags |= IW_ENCODE_RESTRICTED;
+ else
+ erq->flags |= IW_ENCODE_OPEN;
+
+ xlen = le16_to_cpu(priv->keys[index].len);
+
+ erq->length = xlen;
+
+ memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
+
+ orinoco_unlock(priv, &flags);
+
+ if (erq->pointer) {
+ if (copy_to_user(erq->pointer, keybuf, xlen))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char essidbuf[IW_ESSID_MAX_SIZE+1];
+ unsigned long flags;
+
+ /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
+ * anyway... - Jean II */
+
+ memset(&essidbuf, 0, sizeof(essidbuf));
+
+ if (erq->flags) {
+ if (erq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ if (copy_from_user(&essidbuf, erq->pointer, erq->length))
+ return -EFAULT;
+
+ essidbuf[erq->length] = '\0';
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid));
+
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char essidbuf[IW_ESSID_MAX_SIZE+1];
+ int active;
+ int err = 0;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ if (netif_running(dev)) {
+ err = orinoco_hw_get_essid(priv, &active, essidbuf);
+ if (err)
+ return err;
+ } else {
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf));
+ orinoco_unlock(priv, &flags);
+ }
+
+ erq->flags = 1;
+ erq->length = strlen(essidbuf) + 1;
+ if (erq->pointer)
+ if (copy_to_user(erq->pointer, essidbuf, erq->length))
+ return -EFAULT;
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char nickbuf[IW_ESSID_MAX_SIZE+1];
+ unsigned long flags;
+
+ if (nrq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ memset(nickbuf, 0, sizeof(nickbuf));
+
+ if (copy_from_user(nickbuf, nrq->pointer, nrq->length))
+ return -EFAULT;
+
+ nickbuf[nrq->length] = '\0';
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(priv->nick, nickbuf, sizeof(priv->nick));
+
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char nickbuf[IW_ESSID_MAX_SIZE+1];
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1);
+ orinoco_unlock(priv, &flags);
+
+ nrq->length = strlen(nickbuf)+1;
+
+ if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int chan = -1;
+ unsigned long flags;
+
+ /* We can only use this in Ad-Hoc demo mode to set the operating
+ * frequency, or in IBSS mode to set the frequency where the IBSS
+ * will be created - Jean II */
+ if (priv->iw_mode != IW_MODE_ADHOC)
+ return -EOPNOTSUPP;
+
+ if ( (frq->e == 0) && (frq->m <= 1000) ) {
+ /* Setting by channel number */
+ chan = frq->m;
+ } else {
+ /* Setting by frequency - search the table */
+ int mult = 1;
+ int i;
+
+ for (i = 0; i < (6 - frq->e); i++)
+ mult *= 10;
+
+ for (i = 0; i < NUM_CHANNELS; i++)
+ if (frq->m == (channel_frequency[i] * mult))
+ chan = i+1;
+ }
+
+ if ( (chan < 1) || (chan > NUM_CHANNELS) ||
+ ! (priv->channel_mask & (1 << (chan-1)) ) )
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->channel = chan;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ u16 val;
+ int err;
+ unsigned long flags;
+
+ if (!priv->has_sensitivity)
+ return -EOPNOTSUPP;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE, &val);
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return err;
+
+ srq->value = val;
+ srq->fixed = 0; /* auto */
+
+ return 0;
+}
+
+static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = srq->value;
+ unsigned long flags;
+
+ if (!priv->has_sensitivity)
+ return -EOPNOTSUPP;
+
+ if ((val < 1) || (val > 3))
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->ap_density = val;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = rrq->value;
+ unsigned long flags;
+
+ if (rrq->disabled)
+ val = 2347;
+
+ if ( (val < 0) || (val > 2347) )
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->rts_thresh = val;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->has_mwo) {
+ if (frq->disabled)
+ priv->mwo_robust = 0;
+ else {
+ if (frq->fixed)
+ printk(KERN_WARNING "%s: Fixed fragmentation is "
+ "not supported on this firmware. "
+ "Using MWO robust instead.\n", dev->name);
+ priv->mwo_robust = 1;
+ }
+ } else {
+ if (frq->disabled)
+ priv->frag_thresh = 2346;
+ else {
+ if ( (frq->value < 256) || (frq->value > 2346) )
+ err = -EINVAL;
+ else
+ priv->frag_thresh = frq->value & ~0x1; /* must be even */
+ }
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 val;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->has_mwo) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &val);
+ if (err)
+ val = 0;
+
+ frq->value = val ? 2347 : 0;
+ frq->disabled = ! val;
+ frq->fixed = 0;
+ } else {
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &val);
+ if (err)
+ val = 0;
+
+ frq->value = val;
+ frq->disabled = (val >= 2346);
+ frq->fixed = 1;
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ int ratemode = -1;
+ int bitrate; /* 100s of kilobits */
+ int i;
+ unsigned long flags;
+
+ /* As the user space doesn't know our highest rate, it uses -1
+ * to ask us to set the highest rate. Test it using "iwconfig
+ * ethX rate auto" - Jean II */
+ if (rrq->value == -1)
+ bitrate = 110;
+ else {
+ if (rrq->value % 100000)
+ return -EINVAL;
+ bitrate = rrq->value / 100000;
+ }
+
+ if ( (bitrate != 10) && (bitrate != 20) &&
+ (bitrate != 55) && (bitrate != 110) )
+ return -EINVAL;
+
+ for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+ if ( (bitrate_table[i].bitrate == bitrate) &&
+ (bitrate_table[i].automatic == ! rrq->fixed) ) {
+ ratemode = i;
+ break;
+ }
+
+ if (ratemode == -1)
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->bitratemode = ratemode;
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int ratemode;
+ int i;
+ u16 val;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ ratemode = priv->bitratemode;
+
+ BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
+
+ rrq->value = bitrate_table[ratemode].bitrate * 100000;
+ rrq->fixed = ! bitrate_table[ratemode].automatic;
+ rrq->disabled = 0;
+
+ /* If the interface is running we try to find more about the
+ current mode */
+ if (netif_running(dev)) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CURRENTTXRATE, &val);
+ if (err)
+ goto out;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
+ /* Note : in Lucent firmware, the return value of
+ * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
+ * and therefore is totally different from the
+ * encoding of HERMES_RID_CNFTXRATECONTROL.
+ * Don't forget that 6Mb/s is really 5.5Mb/s */
+ if (val == 6)
+ rrq->value = 5500000;
+ else
+ rrq->value = val * 1000000;
+ break;
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
+ for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+ if (bitrate_table[i].intersil_txratectrl == val) {
+ ratemode = i;
+ break;
+ }
+ if (i >= BITRATE_TABLE_SIZE)
+ printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
+ dev->name, val);
+
+ rrq->value = bitrate_table[ratemode].bitrate * 100000;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (prq->disabled) {
+ priv->pm_on = 0;
+ } else {
+ switch (prq->flags & IW_POWER_MODE) {
+ case IW_POWER_UNICAST_R:
+ priv->pm_mcast = 0;
+ priv->pm_on = 1;
+ break;
+ case IW_POWER_ALL_R:
+ priv->pm_mcast = 1;
+ priv->pm_on = 1;
+ break;
+ case IW_POWER_ON:
+ /* No flags : but we may have a value - Jean II */
+ break;
+ default:
+ err = -EINVAL;
+ }
+ if (err)
+ goto out;
+
+ if (prq->flags & IW_POWER_TIMEOUT) {
+ priv->pm_on = 1;
+ priv->pm_timeout = prq->value / 1000;
+ }
+ if (prq->flags & IW_POWER_PERIOD) {
+ priv->pm_on = 1;
+ priv->pm_period = prq->value / 1000;
+ }
+ /* It's valid to not have a value if we are just toggling
+ * the flags... Jean II */
+ if(!priv->pm_on) {
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 enable, period, timeout, mcast;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION, &period);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
+ if (err)
+ goto out;
+
+ prq->disabled = !enable;
+ /* Note : by default, display the period */
+ if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+ prq->flags = IW_POWER_TIMEOUT;
+ prq->value = timeout * 1000;
+ } else {
+ prq->flags = IW_POWER_PERIOD;
+ prq->value = period * 1000;
+ }
+ if (mcast)
+ prq->flags |= IW_POWER_ALL_R;
+ else
+ prq->flags |= IW_POWER_UNICAST_R;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 short_limit, long_limit, lifetime;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
+ &short_limit);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
+ &long_limit);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
+ &lifetime);
+ if (err)
+ goto out;
+
+ rrq->disabled = 0; /* Can't be disabled */
+
+ /* Note : by default, display the retry number */
+ if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+ rrq->flags = IW_RETRY_LIFETIME;
+ rrq->value = lifetime * 1000; /* ??? */
+ } else {
+ /* By default, display the min number */
+ if ((rrq->flags & IW_RETRY_MAX)) {
+ rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ rrq->value = long_limit;
+ } else {
+ rrq->flags = IW_RETRY_LIMIT;
+ rrq->value = short_limit;
+ if(short_limit != long_limit)
+ rrq->flags |= IW_RETRY_MIN;
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) wrq->u.name );
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->ibss_port = val ;
+
+ /* Actually update the mode we are using */
+ set_port_type(priv);
+
+ orinoco_unlock(priv, &flags);
+ return 0;
+}
+
+static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *)wrq->u.name;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ *val = priv->ibss_port;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) wrq->u.name );
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (val) {
+ case 0: /* Try to do IEEE ad-hoc mode */
+ if (! priv->has_ibss) {
+ err = -EINVAL;
+ break;
+ }
+ priv->prefer_port3 = 0;
+
+ break;
+
+ case 1: /* Try to do Lucent proprietary ad-hoc mode */
+ if (! priv->has_port3) {
+ err = -EINVAL;
+ break;
+ }
+ priv->prefer_port3 = 1;
+ break;
+
+ default:
+ err = -EINVAL;
+ }
+
+ if (! err)
+ /* Actually update the mode we are using */
+ set_port_type(priv);
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *)wrq->u.name;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ *val = priv->prefer_port3;
+ orinoco_unlock(priv, &flags);
+ return 0;
+}
+
+/* Spy is used for link quality/strength measurements in Ad-Hoc mode
+ * Jean II */
+static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct sockaddr address[IW_MAX_SPY];
+ int number = srq->length;
+ int i;
+ int err = 0;
+ unsigned long flags;
+
+ /* Check the number of addresses */
+ if (number > IW_MAX_SPY)
+ return -E2BIG;
+
+ /* Get the data in the driver */
+ if (srq->pointer) {
+ if (copy_from_user(address, srq->pointer,
+ sizeof(struct sockaddr) * number))
+ return -EFAULT;
+ }
+
+ /* Make sure nobody mess with the structure while we do */
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* orinoco_lock() doesn't disable interrupts, so make sure the
+ * interrupt rx path don't get confused while we copy */
+ priv->spy_number = 0;
+
+ if (number > 0) {
+ /* Extract the addresses */
+ for (i = 0; i < number; i++)
+ memcpy(priv->spy_address[i], address[i].sa_data,
+ ETH_ALEN);
+ /* Reset stats */
+ memset(priv->spy_stat, 0,
+ sizeof(struct iw_quality) * IW_MAX_SPY);
+ /* Set number of addresses */
+ priv->spy_number = number;
+ }
+
+ /* Now, let the others play */
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct sockaddr address[IW_MAX_SPY];
+ struct iw_quality spy_stat[IW_MAX_SPY];
+ int number;
+ int i;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ number = priv->spy_number;
+ if ((number > 0) && (srq->pointer)) {
+ /* Create address struct */
+ for (i = 0; i < number; i++) {
+ memcpy(address[i].sa_data, priv->spy_address[i],
+ ETH_ALEN);
+ address[i].sa_family = AF_UNIX;
+ }
+ /* Copy stats */
+ /* In theory, we should disable irqs while copying the stats
+ * because the rx path might update it in the middle...
+ * Bah, who care ? - Jean II */
+ memcpy(&spy_stat, priv->spy_stat,
+ sizeof(struct iw_quality) * IW_MAX_SPY);
+ for (i=0; i < number; i++)
+ priv->spy_stat[i].updated = 0;
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ /* Push stuff to user space */
+ srq->length = number;
+ if(copy_to_user(srq->pointer, address,
+ sizeof(struct sockaddr) * number))
+ return -EFAULT;
+ if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number),
+ &spy_stat, sizeof(struct iw_quality) * number))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int
+orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iwreq *wrq = (struct iwreq *)rq;
+ int err = 0;
+ int tmp;
+ int changed = 0;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ /* In theory, we could allow most of the the SET stuff to be
+ * done. In practice, the lapse of time at startup when the
+ * card is not ready is very short, so why bother... Note
+ * that netif_device_present is different from up/down
+ * (ifconfig), when the device is not yet up, it is usually
+ * already ready... Jean II */
+ if (! netif_device_present(dev))
+ return -ENODEV;
+
+ switch (cmd) {
+ case SIOCGIWNAME:
+ strcpy(wrq->u.name, "IEEE 802.11-DS");
+ break;
+
+ case SIOCGIWAP:
+ wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
+ err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data);
+ break;
+
+ case SIOCGIWRANGE:
+ err = orinoco_ioctl_getiwrange(dev, &wrq->u.data);
+ break;
+
+ case SIOCSIWMODE:
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ switch (wrq->u.mode) {
+ case IW_MODE_ADHOC:
+ if (! (priv->has_ibss || priv->has_port3) )
+ err = -EINVAL;
+ else {
+ priv->iw_mode = IW_MODE_ADHOC;
+ changed = 1;
+ }
+ break;
+
+ case IW_MODE_INFRA:
+ priv->iw_mode = IW_MODE_INFRA;
+ changed = 1;
+ break;
+
+ default:
+ err = -EINVAL;
+ break;
+ }
+ set_port_type(priv);
+ orinoco_unlock(priv, &flags);
+ break;
+
+ case SIOCGIWMODE:
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ wrq->u.mode = priv->iw_mode;
+ orinoco_unlock(priv, &flags);
+ break;
+
+ case SIOCSIWENCODE:
+ err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWENCODE:
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding);
+ break;
+
+ case SIOCSIWESSID:
+ err = orinoco_ioctl_setessid(dev, &wrq->u.essid);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWESSID:
+ err = orinoco_ioctl_getessid(dev, &wrq->u.essid);
+ break;
+
+ case SIOCSIWNICKN:
+ err = orinoco_ioctl_setnick(dev, &wrq->u.data);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWNICKN:
+ err = orinoco_ioctl_getnick(dev, &wrq->u.data);
+ break;
+
+ case SIOCGIWFREQ:
+ tmp = orinoco_hw_get_freq(priv);
+ if (tmp < 0) {
+ err = tmp;
+ } else {
+ wrq->u.freq.m = tmp;
+ wrq->u.freq.e = 1;
+ }
+ break;
+
+ case SIOCSIWFREQ:
+ err = orinoco_ioctl_setfreq(dev, &wrq->u.freq);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWSENS:
+ err = orinoco_ioctl_getsens(dev, &wrq->u.sens);
+ break;
+
+ case SIOCSIWSENS:
+ err = orinoco_ioctl_setsens(dev, &wrq->u.sens);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWRTS:
+ wrq->u.rts.value = priv->rts_thresh;
+ wrq->u.rts.disabled = (wrq->u.rts.value == 2347);
+ wrq->u.rts.fixed = 1;
+ break;
+
+ case SIOCSIWRTS:
+ err = orinoco_ioctl_setrts(dev, &wrq->u.rts);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCSIWFRAG:
+ err = orinoco_ioctl_setfrag(dev, &wrq->u.frag);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWFRAG:
+ err = orinoco_ioctl_getfrag(dev, &wrq->u.frag);
+ break;
+
+ case SIOCSIWRATE:
+ err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWRATE:
+ err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate);
+ break;
+
+ case SIOCSIWPOWER:
+ err = orinoco_ioctl_setpower(dev, &wrq->u.power);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWPOWER:
+ err = orinoco_ioctl_getpower(dev, &wrq->u.power);
+ break;
+
+ case SIOCGIWTXPOW:
+ /* The card only supports one tx power, so this is easy */
+ wrq->u.txpower.value = 15; /* dBm */
+ wrq->u.txpower.fixed = 1;
+ wrq->u.txpower.disabled = 0;
+ wrq->u.txpower.flags = IW_TXPOW_DBM;
+ break;
+
+ case SIOCSIWRETRY:
+ err = -EOPNOTSUPP;
+ break;
+
+ case SIOCGIWRETRY:
+ err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
+ break;
+
+ case SIOCSIWSPY:
+ err = orinoco_ioctl_setspy(dev, &wrq->u.data);
+ break;
+
+ case SIOCGIWSPY:
+ err = orinoco_ioctl_getspy(dev, &wrq->u.data);
+ break;
+
+ case SIOCGIWPRIV:
+ if (wrq->u.data.pointer) {
+ struct iw_priv_args privtab[] = {
+ { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
+ { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
+ { SIOCIWFIRSTPRIV + 0x2,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_port3" },
+ { SIOCIWFIRSTPRIV + 0x3, 0,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_port3" },
+ { SIOCIWFIRSTPRIV + 0x4,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_preamble" },
+ { SIOCIWFIRSTPRIV + 0x5, 0,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_preamble" },
+ { SIOCIWFIRSTPRIV + 0x6,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x7, 0,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_ibssport" },
+ { SIOCIWLASTPRIV, 0, 0, "dump_recs" },
+ };
+
+ wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
+ if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
+ err = -EFAULT;
+ }
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x0: /* force_reset */
+ case SIOCIWFIRSTPRIV + 0x1: /* card_reset */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+
+ schedule_work(&priv->reset_work);
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ err = orinoco_ioctl_setport3(dev, wrq);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */
+ err = orinoco_ioctl_getport3(dev, wrq);
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ /* 802.11b has recently defined some short preamble.
+ * Basically, the Phy header has been reduced in size.
+ * This increase performance, especially at high rates
+ * (the preamble is transmitted at 1Mb/s), unfortunately
+ * this give compatibility troubles... - Jean II */
+ if(priv->has_preamble) {
+ int val = *( (int *) wrq->u.name );
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ if (val)
+ priv->preamble = 1;
+ else
+ priv->preamble = 0;
+ orinoco_unlock(priv, &flags);
+ changed = 1;
+ } else
+ err = -EOPNOTSUPP;
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */
+ if(priv->has_preamble) {
+ int *val = (int *)wrq->u.name;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ *val = priv->preamble;
+ orinoco_unlock(priv, &flags);
+ } else
+ err = -EOPNOTSUPP;
+ break;
+ case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ err = orinoco_ioctl_setibssport(dev, wrq);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */
+ err = orinoco_ioctl_getibssport(dev, wrq);
+ break;
+
+ case SIOCIWLASTPRIV:
+ err = orinoco_debug_dump_recs(dev);
+ if (err)
+ printk(KERN_ERR "%s: Unable to dump records (%d)\n",
+ dev->name, err);
+ break;
+
+
+ default:
+ err = -EOPNOTSUPP;
+ }
+
+ if (! err && changed && netif_running(dev)) {
+ err = orinoco_reconfigure(dev);
+ }
+
+ TRACE_EXIT(dev->name);
+
+ return err;
+}
+
+struct {
+ u16 rid;
+ char *name;
+ int displaytype;
+#define DISPLAY_WORDS 0
+#define DISPLAY_BYTES 1
+#define DISPLAY_STRING 2
+#define DISPLAY_XSTRING 3
+} record_table[] = {
+#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type }
+ DEBUG_REC(CNFPORTTYPE,WORDS),
+ DEBUG_REC(CNFOWNMACADDR,BYTES),
+ DEBUG_REC(CNFDESIREDSSID,STRING),
+ DEBUG_REC(CNFOWNCHANNEL,WORDS),
+ DEBUG_REC(CNFOWNSSID,STRING),
+ DEBUG_REC(CNFOWNATIMWINDOW,WORDS),
+ DEBUG_REC(CNFSYSTEMSCALE,WORDS),
+ DEBUG_REC(CNFMAXDATALEN,WORDS),
+ DEBUG_REC(CNFPMENABLED,WORDS),
+ DEBUG_REC(CNFPMEPS,WORDS),
+ DEBUG_REC(CNFMULTICASTRECEIVE,WORDS),
+ DEBUG_REC(CNFMAXSLEEPDURATION,WORDS),
+ DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS),
+ DEBUG_REC(CNFOWNNAME,STRING),
+ DEBUG_REC(CNFOWNDTIMPERIOD,WORDS),
+ DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS),
+ DEBUG_REC(CNFWEPENABLED_AGERE,WORDS),
+ DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS),
+ DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS),
+ DEBUG_REC(CNFDEFAULTKEY0,BYTES),
+ DEBUG_REC(CNFDEFAULTKEY1,BYTES),
+ DEBUG_REC(CNFMWOROBUST_AGERE,WORDS),
+ DEBUG_REC(CNFDEFAULTKEY2,BYTES),
+ DEBUG_REC(CNFDEFAULTKEY3,BYTES),
+ DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS),
+ DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS),
+ DEBUG_REC(CNFAUTHENTICATION,WORDS),
+ DEBUG_REC(CNFMAXASSOCSTA,WORDS),
+ DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS),
+ DEBUG_REC(CNFTXCONTROL,WORDS),
+ DEBUG_REC(CNFROAMINGMODE,WORDS),
+ DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS),
+ DEBUG_REC(CNFRCVCRCERROR,WORDS),
+ DEBUG_REC(CNFMMLIFE,WORDS),
+ DEBUG_REC(CNFALTRETRYCOUNT,WORDS),
+ DEBUG_REC(CNFBEACONINT,WORDS),
+ DEBUG_REC(CNFAPPCFINFO,WORDS),
+ DEBUG_REC(CNFSTAPCFINFO,WORDS),
+ DEBUG_REC(CNFPRIORITYQUSAGE,WORDS),
+ DEBUG_REC(CNFTIMCTRL,WORDS),
+ DEBUG_REC(CNFTHIRTY2TALLY,WORDS),
+ DEBUG_REC(CNFENHSECURITY,WORDS),
+ DEBUG_REC(CNFGROUPADDRESSES,BYTES),
+ DEBUG_REC(CNFCREATEIBSS,WORDS),
+ DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS),
+ DEBUG_REC(CNFRTSTHRESHOLD,WORDS),
+ DEBUG_REC(CNFTXRATECONTROL,WORDS),
+ DEBUG_REC(CNFPROMISCUOUSMODE,WORDS),
+ DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS),
+ DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS),
+ DEBUG_REC(CNFSHORTPREAMBLE,WORDS),
+ DEBUG_REC(CNFWEPKEYS_AGERE,BYTES),
+ DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS),
+ DEBUG_REC(CNFTXKEY_AGERE,WORDS),
+ DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS),
+ DEBUG_REC(CNFBASICRATES,WORDS),
+ DEBUG_REC(CNFSUPPORTEDRATES,WORDS),
+ DEBUG_REC(CNFTICKTIME,WORDS),
+ DEBUG_REC(CNFSCANREQUEST,WORDS),
+ DEBUG_REC(CNFJOINREQUEST,WORDS),
+ DEBUG_REC(CNFAUTHENTICATESTATION,WORDS),
+ DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS),
+ DEBUG_REC(MAXLOADTIME,WORDS),
+ DEBUG_REC(DOWNLOADBUFFER,WORDS),
+ DEBUG_REC(PRIID,WORDS),
+ DEBUG_REC(PRISUPRANGE,WORDS),
+ DEBUG_REC(CFIACTRANGES,WORDS),
+ DEBUG_REC(NICSERNUM,XSTRING),
+ DEBUG_REC(NICID,WORDS),
+ DEBUG_REC(MFISUPRANGE,WORDS),
+ DEBUG_REC(CFISUPRANGE,WORDS),
+ DEBUG_REC(CHANNELLIST,WORDS),
+ DEBUG_REC(REGULATORYDOMAINS,WORDS),
+ DEBUG_REC(TEMPTYPE,WORDS),
+/* DEBUG_REC(CIS,BYTES), */
+ DEBUG_REC(STAID,WORDS),
+ DEBUG_REC(CURRENTSSID,STRING),
+ DEBUG_REC(CURRENTBSSID,BYTES),
+ DEBUG_REC(COMMSQUALITY,WORDS),
+ DEBUG_REC(CURRENTTXRATE,WORDS),
+ DEBUG_REC(CURRENTBEACONINTERVAL,WORDS),
+ DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS),
+ DEBUG_REC(PROTOCOLRSPTIME,WORDS),
+ DEBUG_REC(SHORTRETRYLIMIT,WORDS),
+ DEBUG_REC(LONGRETRYLIMIT,WORDS),
+ DEBUG_REC(MAXTRANSMITLIFETIME,WORDS),
+ DEBUG_REC(MAXRECEIVELIFETIME,WORDS),
+ DEBUG_REC(CFPOLLABLE,WORDS),
+ DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS),
+ DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS),
+ DEBUG_REC(OWNMACADDR,BYTES),
+ DEBUG_REC(SCANRESULTSTABLE,WORDS),
+ DEBUG_REC(PHYTYPE,WORDS),
+ DEBUG_REC(CURRENTCHANNEL,WORDS),
+ DEBUG_REC(CURRENTPOWERSTATE,WORDS),
+ DEBUG_REC(CCAMODE,WORDS),
+ DEBUG_REC(SUPPORTEDDATARATES,WORDS),
+ DEBUG_REC(BUILDSEQ,BYTES),
+ DEBUG_REC(FWID,XSTRING)
+#undef DEBUG_REC
+};
+
+#define DEBUG_LTV_SIZE 128
+
+static int orinoco_debug_dump_recs(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ u8 *val8;
+ u16 *val16;
+ int i,j;
+ u16 length;
+ int err;
+
+ /* I'm not sure: we might have a lock here, so we'd better go
+ atomic, just in case. */
+ val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC);
+ if (! val8)
+ return -ENOMEM;
+ val16 = (u16 *)val8;
+
+ for (i = 0; i < ARRAY_SIZE(record_table); i++) {
+ u16 rid = record_table[i].rid;
+ int len;
+
+ memset(val8, 0, DEBUG_LTV_SIZE + 2);
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE,
+ &length, val8);
+ if (err) {
+ DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid);
+ continue;
+ }
+ val16 = (u16 *)val8;
+ if (length == 0)
+ continue;
+
+ printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=",
+ record_table[i].name,
+ rid, length, (length-1)*2);
+ len = min(((int)length-1)*2, DEBUG_LTV_SIZE);
+
+ switch (record_table[i].displaytype) {
+ case DISPLAY_WORDS:
+ for (j = 0; j < len / 2; j++)
+ printk("%04X-", le16_to_cpu(val16[j]));
+ break;
+
+ case DISPLAY_BYTES:
+ default:
+ for (j = 0; j < len; j++)
+ printk("%02X:", val8[j]);
+ break;
+
+ case DISPLAY_STRING:
+ len = min(len, le16_to_cpu(val16[0])+2);
+ val8[len] = '\0';
+ printk("\"%s\"", (char *)&val16[1]);
+ break;
+
+ case DISPLAY_XSTRING:
+ printk("'%s'", (char *)val8);
+ }
+
+ printk("\n");
+ }
+
+ kfree(val8);
+
+ return 0;
+}
+
+/********************************************************************/
+/* Debugging */
+/********************************************************************/
+
+#if 0
+static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
+{
+ printk(KERN_DEBUG "RX descriptor:\n");
+ printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status);
+ printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time);
+ printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence);
+ printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal);
+ printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate);
+ printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow);
+ printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved);
+
+ printk(KERN_DEBUG "IEEE 802.11 header:\n");
+ printk(KERN_DEBUG " frame_ctl = 0x%04x\n",
+ frame->p80211.frame_ctl);
+ printk(KERN_DEBUG " duration_id = 0x%04x\n",
+ frame->p80211.duration_id);
+ printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr1[0], frame->p80211.addr1[1],
+ frame->p80211.addr1[2], frame->p80211.addr1[3],
+ frame->p80211.addr1[4], frame->p80211.addr1[5]);
+ printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr2[0], frame->p80211.addr2[1],
+ frame->p80211.addr2[2], frame->p80211.addr2[3],
+ frame->p80211.addr2[4], frame->p80211.addr2[5]);
+ printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr3[0], frame->p80211.addr3[1],
+ frame->p80211.addr3[2], frame->p80211.addr3[3],
+ frame->p80211.addr3[4], frame->p80211.addr3[5]);
+ printk(KERN_DEBUG " seq_ctl = 0x%04x\n",
+ frame->p80211.seq_ctl);
+ printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr4[0], frame->p80211.addr4[1],
+ frame->p80211.addr4[2], frame->p80211.addr4[3],
+ frame->p80211.addr4[4], frame->p80211.addr4[5]);
+ printk(KERN_DEBUG " data_len = 0x%04x\n",
+ frame->p80211.data_len);
+
+ printk(KERN_DEBUG "IEEE 802.3 header:\n");
+ printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p8023.h_dest[0], frame->p8023.h_dest[1],
+ frame->p8023.h_dest[2], frame->p8023.h_dest[3],
+ frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
+ printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p8023.h_source[0], frame->p8023.h_source[1],
+ frame->p8023.h_source[2], frame->p8023.h_source[3],
+ frame->p8023.h_source[4], frame->p8023.h_source[5]);
+ printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto);
+
+ printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
+ printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap);
+ printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap);
+ printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl);
+ printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n",
+ frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
+ printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype);
+}
+#endif /* 0 */
+
+/********************************************************************/
+/* Module initialization */
+/********************************************************************/
+
+EXPORT_SYMBOL(alloc_orinocodev);
+EXPORT_SYMBOL(free_orinocodev);
+
+EXPORT_SYMBOL(__orinoco_up);
+EXPORT_SYMBOL(__orinoco_down);
+EXPORT_SYMBOL(orinoco_stop);
+EXPORT_SYMBOL(orinoco_reinit_firmware);
+
+EXPORT_SYMBOL(orinoco_interrupt);
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (David Gibson <hermes@gibson.dropbear.id.au>, "
+ "Pavel Roskin <proski@gnu.org>, et al)";
+
+static int __init init_orinoco(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return 0;
+}
+
+static void __exit exit_orinoco(void)
+{
+}
+
+module_init(init_orinoco);
+module_exit(exit_orinoco);
OpenPOWER on IntegriCloud