diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex/join.c')
| -rw-r--r-- | drivers/net/wireless/mwifiex/join.c | 1423 |
1 files changed, 1423 insertions, 0 deletions
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c new file mode 100644 index 0000000..5eab3dc --- /dev/null +++ b/drivers/net/wireless/mwifiex/join.c @@ -0,0 +1,1423 @@ +/* + * Marvell Wireless LAN device driver: association and ad-hoc start/join + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +#define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9))) + +/* + * Append a generic IE as a pass through TLV to a TLV buffer. + * + * This function is called from the network join command preparation routine. + * + * If the IE buffer has been setup by the application, this routine appends + * the buffer as a pass through TLV type to the request. + */ +static int +mwifiex_cmd_append_generic_ie(struct mwifiex_private *priv, u8 **buffer) +{ + int ret_len = 0; + struct mwifiex_ie_types_header ie_header; + + /* Null Checks */ + if (!buffer) + return 0; + if (!(*buffer)) + return 0; + + /* + * If there is a generic ie buffer setup, append it to the return + * parameter buffer pointer. + */ + if (priv->gen_ie_buf_len) { + dev_dbg(priv->adapter->dev, "info: %s: append generic %d to %p\n", + __func__, priv->gen_ie_buf_len, *buffer); + + /* Wrap the generic IE buffer with a pass through TLV type */ + ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH); + ie_header.len = cpu_to_le16(priv->gen_ie_buf_len); + memcpy(*buffer, &ie_header, sizeof(ie_header)); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += sizeof(ie_header); + ret_len += sizeof(ie_header); + + /* Copy the generic IE buffer to the output buffer, advance + pointer */ + memcpy(*buffer, priv->gen_ie_buf, priv->gen_ie_buf_len); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += priv->gen_ie_buf_len; + ret_len += priv->gen_ie_buf_len; + + /* Reset the generic IE buffer */ + priv->gen_ie_buf_len = 0; + } + + /* return the length appended to the buffer */ + return ret_len; +} + +/* + * Append TSF tracking info from the scan table for the target AP. + * + * This function is called from the network join command preparation routine. + * + * The TSF table TSF sent to the firmware contains two TSF values: + * - The TSF of the target AP from its previous beacon/probe response + * - The TSF timestamp of our local MAC at the time we observed the + * beacon/probe response. + * + * The firmware uses the timestamp values to set an initial TSF value + * in the MAC for the new association after a reassociation attempt. + */ +static int +mwifiex_cmd_append_tsf_tlv(struct mwifiex_private *priv, u8 **buffer, + struct mwifiex_bssdescriptor *bss_desc) +{ + struct mwifiex_ie_types_tsf_timestamp tsf_tlv; + __le64 tsf_val; + + /* Null Checks */ + if (buffer == NULL) + return 0; + if (*buffer == NULL) + return 0; + + memset(&tsf_tlv, 0x00, sizeof(struct mwifiex_ie_types_tsf_timestamp)); + + tsf_tlv.header.type = cpu_to_le16(TLV_TYPE_TSFTIMESTAMP); + tsf_tlv.header.len = cpu_to_le16(2 * sizeof(tsf_val)); + + memcpy(*buffer, &tsf_tlv, sizeof(tsf_tlv.header)); + *buffer += sizeof(tsf_tlv.header); + + /* TSF at the time when beacon/probe_response was received */ + tsf_val = cpu_to_le64(bss_desc->network_tsf); + memcpy(*buffer, &tsf_val, sizeof(tsf_val)); + *buffer += sizeof(tsf_val); + + memcpy(&tsf_val, bss_desc->time_stamp, sizeof(tsf_val)); + + dev_dbg(priv->adapter->dev, "info: %s: TSF offset calc: %016llx - " + "%016llx\n", __func__, tsf_val, bss_desc->network_tsf); + + memcpy(*buffer, &tsf_val, sizeof(tsf_val)); + *buffer += sizeof(tsf_val); + + return sizeof(tsf_tlv.header) + (2 * sizeof(tsf_val)); +} + +/* + * This function finds out the common rates between rate1 and rate2. + * + * It will fill common rates in rate1 as output if found. + * + * NOTE: Setting the MSB of the basic rates needs to be taken + * care of, either before or after calling this function. + */ +static int mwifiex_get_common_rates(struct mwifiex_private *priv, u8 *rate1, + u32 rate1_size, u8 *rate2, u32 rate2_size) +{ + int ret; + u8 *ptr = rate1, *tmp; + u32 i, j; + + tmp = kmalloc(rate1_size, GFP_KERNEL); + if (!tmp) { + dev_err(priv->adapter->dev, "failed to alloc tmp buf\n"); + return -ENOMEM; + } + + memcpy(tmp, rate1, rate1_size); + memset(rate1, 0, rate1_size); + + for (i = 0; rate2[i] && i < rate2_size; i++) { + for (j = 0; tmp[j] && j < rate1_size; j++) { + /* Check common rate, excluding the bit for + basic rate */ + if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) { + *rate1++ = tmp[j]; + break; + } + } + } + + dev_dbg(priv->adapter->dev, "info: Tx data rate set to %#x\n", + priv->data_rate); + + if (!priv->is_data_rate_auto) { + while (*ptr) { + if ((*ptr & 0x7f) == priv->data_rate) { + ret = 0; + goto done; + } + ptr++; + } + dev_err(priv->adapter->dev, "previously set fixed data rate %#x" + " is not compatible with the network\n", + priv->data_rate); + + ret = -1; + goto done; + } + + ret = 0; +done: + kfree(tmp); + return ret; +} + +/* + * This function creates the intersection of the rates supported by a + * target BSS and our adapter settings for use in an assoc/join command. + */ +static int +mwifiex_setup_rates_from_bssdesc(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + u8 *out_rates, u32 *out_rates_size) +{ + u8 card_rates[MWIFIEX_SUPPORTED_RATES]; + u32 card_rates_size; + + /* Copy AP supported rates */ + memcpy(out_rates, bss_desc->supported_rates, MWIFIEX_SUPPORTED_RATES); + /* Get the STA supported rates */ + card_rates_size = mwifiex_get_active_data_rates(priv, card_rates); + /* Get the common rates between AP and STA supported rates */ + if (mwifiex_get_common_rates(priv, out_rates, MWIFIEX_SUPPORTED_RATES, + card_rates, card_rates_size)) { + *out_rates_size = 0; + dev_err(priv->adapter->dev, "%s: cannot get common rates\n", + __func__); + return -1; + } + + *out_rates_size = + min_t(size_t, strlen(out_rates), MWIFIEX_SUPPORTED_RATES); + + return 0; +} + +/* + * This function updates the scan entry TSF timestamps to reflect + * a new association. + */ +static void +mwifiex_update_tsf_timestamps(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *new_bss_desc) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u32 table_idx; + long long new_tsf_base; + signed long long tsf_delta; + + memcpy(&new_tsf_base, new_bss_desc->time_stamp, sizeof(new_tsf_base)); + + tsf_delta = new_tsf_base - new_bss_desc->network_tsf; + + dev_dbg(adapter->dev, "info: TSF: update TSF timestamps, " + "0x%016llx -> 0x%016llx\n", + new_bss_desc->network_tsf, new_tsf_base); + + for (table_idx = 0; table_idx < adapter->num_in_scan_table; + table_idx++) + adapter->scan_table[table_idx].network_tsf += tsf_delta; +} + +/* + * This function appends a WAPI IE. + * + * This function is called from the network join command preparation routine. + * + * If the IE buffer has been setup by the application, this routine appends + * the buffer as a WAPI TLV type to the request. + */ +static int +mwifiex_cmd_append_wapi_ie(struct mwifiex_private *priv, u8 **buffer) +{ + int retLen = 0; + struct mwifiex_ie_types_header ie_header; + + /* Null Checks */ + if (buffer == NULL) + return 0; + if (*buffer == NULL) + return 0; + + /* + * If there is a wapi ie buffer setup, append it to the return + * parameter buffer pointer. + */ + if (priv->wapi_ie_len) { + dev_dbg(priv->adapter->dev, "cmd: append wapi ie %d to %p\n", + priv->wapi_ie_len, *buffer); + + /* Wrap the generic IE buffer with a pass through TLV type */ + ie_header.type = cpu_to_le16(TLV_TYPE_WAPI_IE); + ie_header.len = cpu_to_le16(priv->wapi_ie_len); + memcpy(*buffer, &ie_header, sizeof(ie_header)); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += sizeof(ie_header); + retLen += sizeof(ie_header); + + /* Copy the wapi IE buffer to the output buffer, advance + pointer */ + memcpy(*buffer, priv->wapi_ie, priv->wapi_ie_len); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += priv->wapi_ie_len; + retLen += priv->wapi_ie_len; + + } + /* return the length appended to the buffer */ + return retLen; +} + +/* + * This function appends rsn ie tlv for wpa/wpa2 security modes. + * It is called from the network join command preparation routine. + */ +static int mwifiex_append_rsn_ie_wpa_wpa2(struct mwifiex_private *priv, + u8 **buffer) +{ + struct mwifiex_ie_types_rsn_param_set *rsn_ie_tlv; + int rsn_ie_len; + + if (!buffer || !(*buffer)) + return 0; + + rsn_ie_tlv = (struct mwifiex_ie_types_rsn_param_set *) (*buffer); + rsn_ie_tlv->header.type = cpu_to_le16((u16) priv->wpa_ie[0]); + rsn_ie_tlv->header.type = cpu_to_le16( + le16_to_cpu(rsn_ie_tlv->header.type) & 0x00FF); + rsn_ie_tlv->header.len = cpu_to_le16((u16) priv->wpa_ie[1]); + rsn_ie_tlv->header.len = cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.len) + & 0x00FF); + if (le16_to_cpu(rsn_ie_tlv->header.len) <= (sizeof(priv->wpa_ie) - 2)) + memcpy(rsn_ie_tlv->rsn_ie, &priv->wpa_ie[2], + le16_to_cpu(rsn_ie_tlv->header.len)); + else + return -1; + + rsn_ie_len = sizeof(rsn_ie_tlv->header) + + le16_to_cpu(rsn_ie_tlv->header.len); + *buffer += rsn_ie_len; + + return rsn_ie_len; +} + +/* + * This function prepares command for association. + * + * This sets the following parameters - + * - Peer MAC address + * - Listen interval + * - Beacon interval + * - Capability information + * + * ...and the following TLVs, as required - + * - SSID TLV + * - PHY TLV + * - SS TLV + * - Rates TLV + * - Authentication TLV + * - Channel TLV + * - WPA/WPA2 IE + * - 11n TLV + * - Vendor specific TLV + * - WMM TLV + * - WAPI IE + * - Generic IE + * - TSF TLV + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf) +{ + struct host_cmd_ds_802_11_associate *assoc = &cmd->params.associate; + struct mwifiex_bssdescriptor *bss_desc; + struct mwifiex_ie_types_ssid_param_set *ssid_tlv; + struct mwifiex_ie_types_phy_param_set *phy_tlv; + struct mwifiex_ie_types_ss_param_set *ss_tlv; + struct mwifiex_ie_types_rates_param_set *rates_tlv; + struct mwifiex_ie_types_auth_type *auth_tlv; + struct mwifiex_ie_types_chan_list_param_set *chan_tlv; + u8 rates[MWIFIEX_SUPPORTED_RATES]; + u32 rates_size; + u16 tmp_cap; + u8 *pos; + int rsn_ie_len = 0; + + bss_desc = (struct mwifiex_bssdescriptor *) data_buf; + pos = (u8 *) assoc; + + mwifiex_cfg_tx_buf(priv, bss_desc); + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_ASSOCIATE); + + /* Save so we know which BSS Desc to use in the response handler */ + priv->attempted_bss_desc = bss_desc; + + memcpy(assoc->peer_sta_addr, + bss_desc->mac_address, sizeof(assoc->peer_sta_addr)); + pos += sizeof(assoc->peer_sta_addr); + + /* Set the listen interval */ + assoc->listen_interval = cpu_to_le16(priv->listen_interval); + /* Set the beacon period */ + assoc->beacon_period = cpu_to_le16(bss_desc->beacon_period); + + pos += sizeof(assoc->cap_info_bitmap); + pos += sizeof(assoc->listen_interval); + pos += sizeof(assoc->beacon_period); + pos += sizeof(assoc->dtim_period); + + ssid_tlv = (struct mwifiex_ie_types_ssid_param_set *) pos; + ssid_tlv->header.type = cpu_to_le16(WLAN_EID_SSID); + ssid_tlv->header.len = cpu_to_le16((u16) bss_desc->ssid.ssid_len); + memcpy(ssid_tlv->ssid, bss_desc->ssid.ssid, + le16_to_cpu(ssid_tlv->header.len)); + pos += sizeof(ssid_tlv->header) + le16_to_cpu(ssid_tlv->header.len); + + phy_tlv = (struct mwifiex_ie_types_phy_param_set *) pos; + phy_tlv->header.type = cpu_to_le16(WLAN_EID_DS_PARAMS); + phy_tlv->header.len = cpu_to_le16(sizeof(phy_tlv->fh_ds.ds_param_set)); + memcpy(&phy_tlv->fh_ds.ds_param_set, + &bss_desc->phy_param_set.ds_param_set.current_chan, + sizeof(phy_tlv->fh_ds.ds_param_set)); + pos += sizeof(phy_tlv->header) + le16_to_cpu(phy_tlv->header.len); + + ss_tlv = (struct mwifiex_ie_types_ss_param_set *) pos; + ss_tlv->header.type = cpu_to_le16(WLAN_EID_CF_PARAMS); + ss_tlv->header.len = cpu_to_le16(sizeof(ss_tlv->cf_ibss.cf_param_set)); + pos += sizeof(ss_tlv->header) + le16_to_cpu(ss_tlv->header.len); + + /* Get the common rates supported between the driver and the BSS Desc */ + if (mwifiex_setup_rates_from_bssdesc + (priv, bss_desc, rates, &rates_size)) + return -1; + + /* Save the data rates into Current BSS state structure */ + priv->curr_bss_params.num_of_rates = rates_size; + memcpy(&priv->curr_bss_params.data_rates, rates, rates_size); + + /* Setup the Rates TLV in the association command */ + rates_tlv = (struct mwifiex_ie_types_rates_param_set *) pos; + rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES); + rates_tlv->header.len = cpu_to_le16((u16) rates_size); + memcpy(rates_tlv->rates, rates, rates_size); + pos += sizeof(rates_tlv->header) + rates_size; + dev_dbg(priv->adapter->dev, "info: ASSOC_CMD: rates size = %d\n", + rates_size); + + /* Add the Authentication type to be used for Auth frames */ + auth_tlv = (struct mwifiex_ie_types_auth_type *) pos; + auth_tlv->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth_tlv->header.len = cpu_to_le16(sizeof(auth_tlv->auth_type)); + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED) + auth_tlv->auth_type = cpu_to_le16( + (u16) priv->sec_info.authentication_mode); + else + auth_tlv->auth_type = cpu_to_le16(NL80211_AUTHTYPE_OPEN_SYSTEM); + + pos += sizeof(auth_tlv->header) + le16_to_cpu(auth_tlv->header.len); + + if (IS_SUPPORT_MULTI_BANDS(priv->adapter) + && !(ISSUPP_11NENABLED(priv->adapter->fw_cap_info) + && (!bss_desc->disable_11n) + && (priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN) + && (bss_desc->bcn_ht_cap) + ) + ) { + /* Append a channel TLV for the channel the attempted AP was + found on */ + chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct mwifiex_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (bss_desc->phy_param_set.ds_param_set.current_chan); + dev_dbg(priv->adapter->dev, "info: Assoc: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type = + mwifiex_band_to_radio_type((u8) bss_desc->bss_band); + + dev_dbg(priv->adapter->dev, "info: Assoc: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + } + + if (!priv->wps.session_enable) { + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); + + if (rsn_ie_len == -1) + return -1; + } + + if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) + && (!bss_desc->disable_11n) + && (priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN)) + mwifiex_cmd_append_11n_tlv(priv, bss_desc, &pos); + + /* Append vendor specific IE TLV */ + mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_ASSOC, &pos); + + mwifiex_wmm_process_association_req(priv, &pos, &bss_desc->wmm_ie, + bss_desc->bcn_ht_cap); + if (priv->sec_info.wapi_enabled && priv->wapi_ie_len) + mwifiex_cmd_append_wapi_ie(priv, &pos); + + + mwifiex_cmd_append_generic_ie(priv, &pos); + + mwifiex_cmd_append_tsf_tlv(priv, &pos, bss_desc); + + cmd->size = cpu_to_le16((u16) (pos - (u8 *) assoc) + S_DS_GEN); + + /* Set the Capability info at last */ + tmp_cap = bss_desc->cap_info_bitmap; + + if (priv->adapter->config_bands == BAND_B) + tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; + + tmp_cap &= CAPINFO_MASK; + dev_dbg(priv->adapter->dev, "info: ASSOC_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n", + tmp_cap, CAPINFO_MASK); + assoc->cap_info_bitmap = cpu_to_le16(tmp_cap); + + return 0; +} + +/* + * Association firmware command response handler + * + * The response buffer for the association command has the following + * memory layout. + * + * For cases where an association response was not received (indicated + * by the CapInfo and AId field): + * + * .------------------------------------------------------------. + * | Header(4 * sizeof(t_u16)): Standard command response hdr | + * .------------------------------------------------------------. + * | cap_info/Error Return(t_u16): | + * | 0xFFFF(-1): Internal error | + * | 0xFFFE(-2): Authentication unhandled message | + * | 0xFFFD(-3): Authentication refused | + * | 0xFFFC(-4): Timeout waiting for AP response | + * .------------------------------------------------------------. + * | status_code(t_u16): | + * | If cap_info is -1: | + * | An internal firmware failure prevented the | + * | command from being processed. The status_code | + * | will be set to 1. | + * | | + * | If cap_info is -2: | + * | An authentication frame was received but was | + * | not handled by the firmware. IEEE Status | + * | code for the failure is returned. | + * | | + * | If cap_info is -3: | + * | An authentication frame was received and the | + * | status_code is the IEEE Status reported in the | + * | response. | + * | | + * | If cap_info is -4: | + * | (1) Association response timeout | + * | (2) Authentication response timeout | + * .------------------------------------------------------------. + * | a_id(t_u16): 0xFFFF | + * .------------------------------------------------------------. + * + * + * For cases where an association response was received, the IEEE + * standard association response frame is returned: + * + * .------------------------------------------------------------. + * | Header(4 * sizeof(t_u16)): Standard command response hdr | + * .------------------------------------------------------------. + * | cap_info(t_u16): IEEE Capability | + * .------------------------------------------------------------. + * | status_code(t_u16): IEEE Status Code | + * .------------------------------------------------------------. + * | a_id(t_u16): IEEE Association ID | + * .------------------------------------------------------------. + * | IEEE IEs(variable): Any received IEs comprising the | + * | remaining portion of a received | + * | association response frame. | + * .------------------------------------------------------------. + * + * For simplistic handling, the status_code field can be used to determine + * an association success (0) or failure (non-zero). + */ +int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct mwifiex_adapter *adapter = priv->adapter; + int ret = 0; + struct ieee_types_assoc_rsp *assoc_rsp; + struct mwifiex_bssdescriptor *bss_desc; + u8 enable_data = true; + + assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params; + + priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN, + sizeof(priv->assoc_rsp_buf)); + + memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size); + + if (le16_to_cpu(assoc_rsp->status_code)) { + priv->adapter->dbg.num_cmd_assoc_failure++; + dev_err(priv->adapter->dev, "ASSOC_RESP: association failed, " + "status code = %d, error = 0x%x, a_id = 0x%x\n", + le16_to_cpu(assoc_rsp->status_code), + le16_to_cpu(assoc_rsp->cap_info_bitmap), + le16_to_cpu(assoc_rsp->a_id)); + + ret = -1; + goto done; + } + + /* Send a Media Connected event, according to the Spec */ + priv->media_connected = true; + + priv->adapter->ps_state = PS_STATE_AWAKE; + priv->adapter->pps_uapsd_mode = false; + priv->adapter->tx_lock_flag = false; + + /* Set the attempted BSSID Index to current */ + bss_desc = priv->attempted_bss_desc; + + dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: %s\n", + bss_desc->ssid.ssid); + + /* Make a copy of current BSSID descriptor */ + memcpy(&priv->curr_bss_params.bss_descriptor, + bss_desc, sizeof(struct mwifiex_bssdescriptor)); + + /* Update curr_bss_params */ + priv->curr_bss_params.bss_descriptor.channel + = bss_desc->phy_param_set.ds_param_set.current_chan; + + priv->curr_bss_params.band = (u8) bss_desc->bss_band; + + /* + * Adjust the timestamps in the scan table to be relative to the newly + * associated AP's TSF + */ + mwifiex_update_tsf_timestamps(priv, bss_desc); + + if (bss_desc->wmm_ie.vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC) + priv->curr_bss_params.wmm_enabled = true; + else + priv->curr_bss_params.wmm_enabled = false; + + if ((priv->wmm_required || bss_desc->bcn_ht_cap) + && priv->curr_bss_params.wmm_enabled) + priv->wmm_enabled = true; + else + priv->wmm_enabled = false; + + priv->curr_bss_params.wmm_uapsd_enabled = false; + + if (priv->wmm_enabled) + priv->curr_bss_params.wmm_uapsd_enabled + = ((bss_desc->wmm_ie.qos_info_bitmap & + IEEE80211_WMM_IE_AP_QOSINFO_UAPSD) ? 1 : 0); + + dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: curr_pkt_filter is %#x\n", + priv->curr_pkt_filter); + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + priv->wpa_is_gtk_set = false; + + if (priv->wmm_enabled) { + /* Don't re-enable carrier until we get the WMM_GET_STATUS + event */ + enable_data = false; + } else { + /* Since WMM is not enabled, setup the queues with the + defaults */ + mwifiex_wmm_setup_queue_priorities(priv, NULL); + mwifiex_wmm_setup_ac_downgrade(priv); + } + + if (enable_data) + dev_dbg(priv->adapter->dev, + "info: post association, re-enabling data flow\n"); + + /* Reset SNR/NF/RSSI values */ + priv->data_rssi_last = 0; + priv->data_nf_last = 0; + priv->data_rssi_avg = 0; + priv->data_nf_avg = 0; + priv->bcn_rssi_last = 0; + priv->bcn_nf_last = 0; + priv->bcn_rssi_avg = 0; + priv->bcn_nf_avg = 0; + priv->rxpd_rate = 0; + priv->rxpd_htinfo = 0; + + mwifiex_save_curr_bcn(priv); + + priv->adapter->dbg.num_cmd_assoc_success++; + + dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: associated\n"); + + /* Add the ra_list here for infra mode as there will be only 1 ra + always */ + mwifiex_ralist_add(priv, + priv->curr_bss_params.bss_descriptor.mac_address); + + if (!netif_carrier_ok(priv->netdev)) + netif_carrier_on(priv->netdev); + if (netif_queue_stopped(priv->netdev)) + netif_wake_queue(priv->netdev); + + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + priv->scan_block = true; + +done: + /* Need to indicate IOCTL complete */ + if (adapter->curr_cmd->wait_q_enabled) { + if (ret) + adapter->cmd_wait_q.status = -1; + else + adapter->cmd_wait_q.status = 0; + } + + return ret; +} + +/* + * This function prepares command for ad-hoc start. + * + * Driver will fill up SSID, BSS mode, IBSS parameters, physical + * parameters, probe delay, and capability information. Firmware + * will fill up beacon period, basic rates and operational rates. + * + * In addition, the following TLVs are added - + * - Channel TLV + * - Vendor specific IE + * - WPA/WPA2 IE + * - HT Capabilities IE + * - HT Information IE + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int +mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + int rsn_ie_len = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_ad_hoc_start *adhoc_start = + &cmd->params.adhoc_start; + struct mwifiex_bssdescriptor *bss_desc; + u32 cmd_append_size = 0; + u32 i; + u16 tmp_cap; + uint16_t ht_cap_info; + struct mwifiex_ie_types_chan_list_param_set *chan_tlv; + + struct mwifiex_ie_types_htcap *ht_cap; + struct mwifiex_ie_types_htinfo *ht_info; + u8 *pos = (u8 *) adhoc_start + + sizeof(struct host_cmd_ds_802_11_ad_hoc_start); + + if (!adapter) + return -1; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_START); + + bss_desc = &priv->curr_bss_params.bss_descriptor; + priv->attempted_bss_desc = bss_desc; + + /* + * Fill in the parameters for 2 data structures: + * 1. struct host_cmd_ds_802_11_ad_hoc_start command + * 2. bss_desc + * Driver will fill up SSID, bss_mode,IBSS param, Physical Param, + * probe delay, and Cap info. + * Firmware will fill up beacon period, Basic rates + * and operational rates. + */ + + memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN); + + memcpy(adhoc_start->ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len); + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: SSID = %s\n", + adhoc_start->ssid); + + memset(bss_desc->ssid.ssid, 0, IEEE80211_MAX_SSID_LEN); + memcpy(bss_desc->ssid.ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len); + + bss_desc->ssid.ssid_len = + ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len; + + /* Set the BSS mode */ + adhoc_start->bss_mode = HostCmd_BSS_MODE_IBSS; + bss_desc->bss_mode = NL80211_IFTYPE_ADHOC; + adhoc_start->beacon_period = cpu_to_le16(priv->beacon_period); + bss_desc->beacon_period = priv->beacon_period; + + /* Set Physical param set */ +/* Parameter IE Id */ +#define DS_PARA_IE_ID 3 +/* Parameter IE length */ +#define DS_PARA_IE_LEN 1 + + adhoc_start->phy_param_set.ds_param_set.element_id = DS_PARA_IE_ID; + adhoc_start->phy_param_set.ds_param_set.len = DS_PARA_IE_LEN; + + if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, adapter->adhoc_start_band, (u16) + priv->adhoc_channel)) { + struct mwifiex_chan_freq_power *cfp; + cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv, + adapter->adhoc_start_band, FIRST_VALID_CHANNEL); + if (cfp) + priv->adhoc_channel = (u8) cfp->channel; + } + + if (!priv->adhoc_channel) { + dev_err(adapter->dev, "ADHOC_S_CMD: adhoc_channel cannot be 0\n"); + return -1; + } + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: creating ADHOC on channel %d\n", + priv->adhoc_channel); + + priv->curr_bss_params.bss_descriptor.channel = priv->adhoc_channel; + priv->curr_bss_params.band = adapter->adhoc_start_band; + + bss_desc->channel = priv->adhoc_channel; + adhoc_start->phy_param_set.ds_param_set.current_chan = + priv->adhoc_channel; + + memcpy(&bss_desc->phy_param_set, &adhoc_start->phy_param_set, + sizeof(union ieee_types_phy_param_set)); + + /* Set IBSS param set */ +/* IBSS parameter IE Id */ +#define IBSS_PARA_IE_ID 6 +/* IBSS parameter IE length */ +#define IBSS_PARA_IE_LEN 2 + + adhoc_start->ss_param_set.ibss_param_set.element_id = IBSS_PARA_IE_ID; + adhoc_start->ss_param_set.ibss_param_set.len = IBSS_PARA_IE_LEN; + adhoc_start->ss_param_set.ibss_param_set.atim_window + = cpu_to_le16(priv->atim_window); + memcpy(&bss_desc->ss_param_set, &adhoc_start->ss_param_set, + sizeof(union ieee_types_ss_param_set)); + + /* Set Capability info */ + bss_desc->cap_info_bitmap |= WLAN_CAPABILITY_IBSS; + tmp_cap = le16_to_cpu(adhoc_start->cap_info_bitmap); + tmp_cap &= ~WLAN_CAPABILITY_ESS; + tmp_cap |= WLAN_CAPABILITY_IBSS; + + /* Set up privacy in bss_desc */ + if (priv->sec_info.encryption_mode) { + /* Ad-Hoc capability privacy on */ + dev_dbg(adapter->dev, + "info: ADHOC_S_CMD: wep_status set privacy to WEP\n"); + bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; + tmp_cap |= WLAN_CAPABILITY_PRIVACY; + } else { + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: wep_status NOT set," + " setting privacy to ACCEPT ALL\n"); + bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL; + } + + memset(adhoc_start->DataRate, 0, sizeof(adhoc_start->DataRate)); + mwifiex_get_active_data_rates(priv, adhoc_start->DataRate); + if ((adapter->adhoc_start_band & BAND_G) && + (priv->curr_pkt_filter & HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON)) { + if (mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL, + HostCmd_ACT_GEN_SET, 0, + &priv->curr_pkt_filter)) { + dev_err(adapter->dev, + "ADHOC_S_CMD: G Protection config failed\n"); + return -1; + } + } + /* Find the last non zero */ + for (i = 0; i < sizeof(adhoc_start->DataRate) && + adhoc_start->DataRate[i]; + i++) + ; + + priv->curr_bss_params.num_of_rates = i; + + /* Copy the ad-hoc creating rates into Current BSS rate structure */ + memcpy(&priv->curr_bss_params.data_rates, + &adhoc_start->DataRate, priv->curr_bss_params.num_of_rates); + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: rates=%02x %02x %02x %02x\n", + adhoc_start->DataRate[0], adhoc_start->DataRate[1], + adhoc_start->DataRate[2], adhoc_start->DataRate[3]); + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: AD-HOC Start command is ready\n"); + + if (IS_SUPPORT_MULTI_BANDS(adapter)) { + /* Append a channel TLV */ + chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct mwifiex_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (u8) priv->curr_bss_params.bss_descriptor.channel; + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type + = mwifiex_band_to_radio_type(priv->curr_bss_params.band); + if (adapter->adhoc_start_band & BAND_GN + || adapter->adhoc_start_band & BAND_AN) { + if (adapter->chan_offset == SEC_CHANNEL_ABOVE) + chan_tlv->chan_scan_param[0].radio_type |= + SECOND_CHANNEL_ABOVE; + else if (adapter->chan_offset == SEC_CHANNEL_BELOW) + chan_tlv->chan_scan_param[0].radio_type |= + SECOND_CHANNEL_BELOW; + } + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + cmd_append_size += + sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + } + + /* Append vendor specific IE TLV */ + cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv, + MWIFIEX_VSIE_MASK_ADHOC, &pos); + + if (priv->sec_info.wpa_enabled) { + rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); + if (rsn_ie_len == -1) + return -1; + cmd_append_size += rsn_ie_len; + } + + if (adapter->adhoc_11n_enabled) { + { + ht_cap = (struct mwifiex_ie_types_htcap *) pos; + memset(ht_cap, 0, + sizeof(struct mwifiex_ie_types_htcap)); + ht_cap->header.type = + cpu_to_le16(WLAN_EID_HT_CAPABILITY); + ht_cap->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_cap)); + ht_cap_info = le16_to_cpu(ht_cap->ht_cap.cap_info); + + ht_cap_info |= IEEE80211_HT_CAP_SGI_20; + if (adapter->chan_offset) { + ht_cap_info |= IEEE80211_HT_CAP_SGI_40; + ht_cap_info |= IEEE80211_HT_CAP_DSSSCCK40; + ht_cap_info |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask); + } + + ht_cap->ht_cap.ampdu_params_info + = IEEE80211_HT_MAX_AMPDU_64K; + ht_cap->ht_cap.mcs.rx_mask[0] = 0xff; + pos += sizeof(struct mwifiex_ie_types_htcap); + cmd_append_size += + sizeof(struct mwifiex_ie_types_htcap); + } + { + ht_info = (struct mwifiex_ie_types_htinfo *) pos; + memset(ht_info, 0, + sizeof(struct mwifiex_ie_types_htinfo)); + ht_info->header.type = + cpu_to_le16(WLAN_EID_HT_INFORMATION); + ht_info->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_info)); + ht_info->ht_info.control_chan = + (u8) priv->curr_bss_params.bss_descriptor. + channel; + if (adapter->chan_offset) { + ht_info->ht_info.ht_param = + adapter->chan_offset; + ht_info->ht_info.ht_param |= + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY; + } + ht_info->ht_info.operation_mode = + cpu_to_le16(IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + ht_info->ht_info.basic_set[0] = 0xff; + pos += sizeof(struct mwifiex_ie_types_htinfo); + cmd_append_size += + sizeof(struct mwifiex_ie_types_htinfo); + } + } + + cmd->size = cpu_to_le16((u16) + (sizeof(struct host_cmd_ds_802_11_ad_hoc_start) + + S_DS_GEN + cmd_append_size)); + + if (adapter->adhoc_start_band == BAND_B) + tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; + else + tmp_cap |= WLAN_CAPABILITY_SHORT_SLOT_TIME; + + adhoc_start->cap_info_bitmap = cpu_to_le16(tmp_cap); + + return 0; +} + +/* + * This function prepares command for ad-hoc join. + * + * Most of the parameters are set up by copying from the target BSS descriptor + * from the scan response. + * + * In addition, the following TLVs are added - + * - Channel TLV + * - Vendor specific IE + * - WPA/WPA2 IE + * - 11n IE + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int +mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + int rsn_ie_len = 0; + struct host_cmd_ds_802_11_ad_hoc_join *adhoc_join = + &cmd->params.adhoc_join; + struct mwifiex_bssdescriptor *bss_desc = + (struct mwifiex_bssdescriptor *) data_buf; + struct mwifiex_ie_types_chan_list_param_set *chan_tlv; + u32 cmd_append_size = 0; + u16 tmp_cap; + u32 i, rates_size = 0; + u16 curr_pkt_filter; + u8 *pos = + (u8 *) adhoc_join + + sizeof(struct host_cmd_ds_802_11_ad_hoc_join); + +/* Use G protection */ +#define USE_G_PROTECTION 0x02 + if (bss_desc->erp_flags & USE_G_PROTECTION) { + curr_pkt_filter = + priv-> + curr_pkt_filter | HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON; + + if (mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL, + HostCmd_ACT_GEN_SET, 0, + &curr_pkt_filter)) { + dev_err(priv->adapter->dev, + "ADHOC_J_CMD: G Protection config failed\n"); + return -1; + } + } + + priv->attempted_bss_desc = bss_desc; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_JOIN); + + adhoc_join->bss_descriptor.bss_mode = HostCmd_BSS_MODE_IBSS; + + adhoc_join->bss_descriptor.beacon_period + = cpu_to_le16(bss_desc->beacon_period); + + memcpy(&adhoc_join->bss_descriptor.bssid, + &bss_desc->mac_address, ETH_ALEN); + + memcpy(&adhoc_join->bss_descriptor.ssid, + &bss_desc->ssid.ssid, bss_desc->ssid.ssid_len); + + memcpy(&adhoc_join->bss_descriptor.phy_param_set, + &bss_desc->phy_param_set, + sizeof(union ieee_types_phy_param_set)); + + memcpy(&adhoc_join->bss_descriptor.ss_param_set, + &bss_desc->ss_param_set, sizeof(union ieee_types_ss_param_set)); + + tmp_cap = bss_desc->cap_info_bitmap; + + tmp_cap &= CAPINFO_MASK; + + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: tmp_cap=%4X" + " CAPINFO_MASK=%4lX\n", tmp_cap, CAPINFO_MASK); + + /* Information on BSSID descriptor passed to FW */ + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: BSSID = %pM, SSID = %s\n", + adhoc_join->bss_descriptor.bssid, + adhoc_join->bss_descriptor.ssid); + + for (i = 0; bss_desc->supported_rates[i] && + i < MWIFIEX_SUPPORTED_RATES; + i++) + ; + rates_size = i; + + /* Copy Data Rates from the Rates recorded in scan response */ + memset(adhoc_join->bss_descriptor.data_rates, 0, + sizeof(adhoc_join->bss_descriptor.data_rates)); + memcpy(adhoc_join->bss_descriptor.data_rates, + bss_desc->supported_rates, rates_size); + + /* Copy the adhoc join rates into Current BSS state structure */ + priv->curr_bss_params.num_of_rates = rates_size; + memcpy(&priv->curr_bss_params.data_rates, bss_desc->supported_rates, + rates_size); + + /* Copy the channel information */ + priv->curr_bss_params.bss_descriptor.channel = bss_desc->channel; + priv->curr_bss_params.band = (u8) bss_desc->bss_band; + + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED + || priv->sec_info.wpa_enabled) + tmp_cap |= WLAN_CAPABILITY_PRIVACY; + + if (IS_SUPPORT_MULTI_BANDS(priv->adapter)) { + /* Append a channel TLV */ + chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct mwifiex_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (bss_desc->phy_param_set.ds_param_set.current_chan); + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type = + mwifiex_band_to_radio_type((u8) bss_desc->bss_band); + + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + cmd_append_size += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + } + + if (priv->sec_info.wpa_enabled) + rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); + if (rsn_ie_len == -1) + return -1; + cmd_append_size += rsn_ie_len; + + if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info)) + cmd_append_size += mwifiex_cmd_append_11n_tlv(priv, + bss_desc, &pos); + + /* Append vendor specific IE TLV */ + cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv, + MWIFIEX_VSIE_MASK_ADHOC, &pos); + + cmd->size = cpu_to_le16((u16) + (sizeof(struct host_cmd_ds_802_11_ad_hoc_join) + + S_DS_GEN + cmd_append_size)); + + adhoc_join->bss_descriptor.cap_info_bitmap = cpu_to_le16(tmp_cap); + + return 0; +} + +/* + * This function handles the command response of ad-hoc start and + * ad-hoc join. + * + * The function generates a device-connected event to notify + * the applications, in case of successful ad-hoc start/join, and + * saves the beacon buffer. + */ +int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_ad_hoc_result *adhoc_result; + struct mwifiex_bssdescriptor *bss_desc; + + adhoc_result = &resp->params.adhoc_result; + + bss_desc = priv->attempted_bss_desc; + + /* Join result code 0 --> SUCCESS */ + if (le16_to_cpu(resp->result)) { + dev_err(priv->adapter->dev, "ADHOC_RESP: failed\n"); + if (priv->media_connected) + mwifiex_reset_connect_state(priv); + + memset(&priv->curr_bss_params.bss_descriptor, + 0x00, sizeof(struct mwifiex_bssdescriptor)); + + ret = -1; + goto done; + } + + /* Send a Media Connected event, according to the Spec */ + priv->media_connected = true; + + if (le16_to_cpu(resp->command) == HostCmd_CMD_802_11_AD_HOC_START) { + dev_dbg(priv->adapter->dev, "info: ADHOC_S_RESP %s\n", + bss_desc->ssid.ssid); + + /* Update the created network descriptor with the new BSSID */ + memcpy(bss_desc->mac_address, + adhoc_result->bssid, ETH_ALEN); + + priv->adhoc_state = ADHOC_STARTED; + } else { + /* + * Now the join cmd should be successful. + * If BSSID has changed use SSID to compare instead of BSSID + */ + dev_dbg(priv->adapter->dev, "info: ADHOC_J_RESP %s\n", + bss_desc->ssid.ssid); + + /* + * Make a copy of current BSSID descriptor, only needed for + * join since the current descriptor is already being used + * for adhoc start + */ + memcpy(&priv->curr_bss_params.bss_descriptor, + bss_desc, sizeof(struct mwifiex_bssdescriptor)); + + priv->adhoc_state = ADHOC_JOINED; + } + + dev_dbg(priv->adapter->dev, "info: ADHOC_RESP: channel = %d\n", + priv->adhoc_channel); + dev_dbg(priv->adapter->dev, "info: ADHOC_RESP: BSSID = %pM\n", + priv->curr_bss_params.bss_descriptor.mac_address); + + if (!netif_carrier_ok(priv->netdev)) + netif_carrier_on(priv->netdev); + if (netif_queue_stopped(priv->netdev)) + netif_wake_queue(priv->netdev); + + mwifiex_save_curr_bcn(priv); + +done: + /* Need to indicate IOCTL complete */ + if (adapter->curr_cmd->wait_q_enabled) { + if (ret) + adapter->cmd_wait_q.status = -1; + else + adapter->cmd_wait_q.status = 0; + + } + + return ret; +} + +/* + * This function associates to a specific BSS discovered in a scan. + * + * It clears any past association response stored for application + * retrieval and calls the command preparation routine to send the + * command to firmware. + */ +int mwifiex_associate(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + u8 current_bssid[ETH_ALEN]; + + /* Return error if the adapter or table entry is not marked as infra */ + if ((priv->bss_mode != NL80211_IFTYPE_STATION) || + (bss_desc->bss_mode != NL80211_IFTYPE_STATION)) + return -1; + + memcpy(¤t_bssid, + &priv->curr_bss_params.bss_descriptor.mac_address, + sizeof(current_bssid)); + + /* Clear any past association response stored for application + retrieval */ + priv->assoc_rsp_size = 0; + + return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_ASSOCIATE, + HostCmd_ACT_GEN_SET, 0, bss_desc); +} + +/* + * This function starts an ad-hoc network. + * + * It calls the command preparation routine to send the command to firmware. + */ +int +mwifiex_adhoc_start(struct mwifiex_private *priv, + struct mwifiex_802_11_ssid *adhoc_ssid) +{ + dev_dbg(priv->adapter->dev, "info: Adhoc Channel = %d\n", + priv->adhoc_channel); + dev_dbg(priv->adapter->dev, "info: curr_bss_params.channel = %d\n", + priv->curr_bss_params.bss_descriptor.channel); + dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %d\n", + priv->curr_bss_params.band); + + return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_START, + HostCmd_ACT_GEN_SET, 0, adhoc_ssid); +} + +/* + * This function joins an ad-hoc network found in a previous scan. + * + * It calls the command preparation routine to send the command to firmware, + * if already not connected to the requested SSID. + */ +int mwifiex_adhoc_join(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + dev_dbg(priv->adapter->dev, "info: adhoc join: curr_bss ssid =%s\n", + priv->curr_bss_params.bss_descriptor.ssid.ssid); + dev_dbg(priv->adapter->dev, "info: adhoc join: curr_bss ssid_len =%u\n", + priv->curr_bss_params.bss_descriptor.ssid.ssid_len); + dev_dbg(priv->adapter->dev, "info: adhoc join: ssid =%s\n", + bss_desc->ssid.ssid); + dev_dbg(priv->adapter->dev, "info: adhoc join: ssid_len =%u\n", + bss_desc->ssid.ssid_len); + + /* Check if the requested SSID is already joined */ + if (priv->curr_bss_params.bss_descriptor.ssid.ssid_len && + !mwifiex_ssid_cmp(&bss_desc->ssid, + &priv->curr_bss_params.bss_descriptor.ssid) && + (priv->curr_bss_params.bss_descriptor.bss_mode == + NL80211_IFTYPE_ADHOC)) { + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: new ad-hoc SSID" + " is the same as current; not attempting to re-join\n"); + return -1; + } + + dev_dbg(priv->adapter->dev, "info: curr_bss_params.channel = %d\n", + priv->curr_bss_params.bss_descriptor.channel); + dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %c\n", + priv->curr_bss_params.band); + + return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_JOIN, + HostCmd_ACT_GEN_SET, 0, bss_desc); +} + +/* + * This function deauthenticates/disconnects from infra network by sending + * deauthentication request. + */ +static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac) +{ + u8 mac_address[ETH_ALEN]; + int ret; + u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 }; + + if (mac) { + if (!memcmp(mac, zero_mac, sizeof(zero_mac))) + memcpy((u8 *) &mac_address, + (u8 *) &priv->curr_bss_params.bss_descriptor. + mac_address, ETH_ALEN); + else + memcpy((u8 *) &mac_address, (u8 *) mac, ETH_ALEN); + } else { + memcpy((u8 *) &mac_address, (u8 *) &priv->curr_bss_params. + bss_descriptor.mac_address, ETH_ALEN); + } + + ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_DEAUTHENTICATE, + HostCmd_ACT_GEN_SET, 0, &mac_address); + + return ret; +} + +/* + * This function deauthenticates/disconnects from a BSS. + * + * In case of infra made, it sends deauthentication request, and + * in case of ad-hoc mode, a stop network request is sent to the firmware. + */ +int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac) +{ + int ret = 0; + + if (priv->media_connected) { + if (priv->bss_mode == NL80211_IFTYPE_STATION) { + ret = mwifiex_deauthenticate_infra(priv, mac); + } else if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + ret = mwifiex_send_cmd_sync(priv, + HostCmd_CMD_802_11_AD_HOC_STOP, + HostCmd_ACT_GEN_SET, 0, NULL); + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(mwifiex_deauthenticate); + +/* + * This function converts band to radio type used in channel TLV. + */ +u8 +mwifiex_band_to_radio_type(u8 band) +{ + switch (band) { + case BAND_A: + case BAND_AN: + case BAND_A | BAND_AN: + return HostCmd_SCAN_RADIO_TYPE_A; + case BAND_B: + case BAND_G: + case BAND_B | BAND_G: + default: + return HostCmd_SCAN_RADIO_TYPE_BG; + } +} |
