diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex/README')
-rw-r--r-- | drivers/net/wireless/mwifiex/README | 32 |
1 files changed, 31 insertions, 1 deletions
diff --git a/drivers/net/wireless/mwifiex/README b/drivers/net/wireless/mwifiex/README index 3b55ce5..31928ca 100644 --- a/drivers/net/wireless/mwifiex/README +++ b/drivers/net/wireless/mwifiex/README @@ -1,4 +1,4 @@ -# Copyright (C) 2011, Marvell International Ltd. +# Copyright (C) 2011-2014, Marvell International Ltd. # # This software file (the "File") is distributed by Marvell International # Ltd. under the terms of the GNU General Public License Version 2, June 1991 @@ -194,6 +194,36 @@ rdeeprom Example: echo "0 20" > rdeeprom : Read 20 bytes of EEPROM data from offset 0 +hscfg + This command is used to debug/simulate host sleep feature using + different configuration parameters. + + Usage: + echo "<condition> [GPIO# [gap]]]" > hscfg + cat hscfg + + where the parameters are, + <condition>: bit 0 = 1 -- broadcast data + bit 1 = 1 -- unicast data + bit 2 = 1 -- mac event + bit 3 = 1 -- multicast data + [GPIO#]: pin number of GPIO used to wakeup the host. + GPIO pin# (e.g. 0-7) or 0xff (interface, e.g. SDIO + will be used instead). + [gap]: the gap in milliseconds between wakeup signal and + wakeup event or 0xff for special setting (host + acknowledge required) when GPIO is used to wakeup host. + + Examples: + echo "-1" > hscfg : Cancel host sleep mode + echo "3" > hscfg : Broadcast and unicast data; + Use GPIO and gap set previously + echo "2 3" > hscfg : Unicast data and GPIO 3; + Use gap set previously + echo "2 1 160" > hscfg : Unicast data, GPIO 1 and gap 160 ms + echo "2 1 0xff" > hscfg : Unicast data, GPIO 1; Wait for host + to ack before sending wakeup event + getlog This command is used to get the statistics available in the station. Usage: |