diff options
Diffstat (limited to 'drivers/net/wireless/marvell/mwifiex/sdio.c')
-rw-r--r-- | drivers/net/wireless/marvell/mwifiex/sdio.c | 508 |
1 files changed, 229 insertions, 279 deletions
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c index 43facba..a4b356d 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -31,23 +31,9 @@ #define SDIO_VERSION "1.0" -/* The mwifiex_sdio_remove() callback function is called when - * user removes this module from kernel space or ejects - * the card from the slot. The driver handles these 2 cases - * differently. - * If the user is removing the module, the few commands (FUNC_SHUTDOWN, - * HS_CANCEL etc.) are sent to the firmware. - * If the card is removed, there is no need to send these command. - * - * The variable 'user_rmmod' is used to distinguish these two - * scenarios. This flag is initialized as FALSE in case the card - * is removed, and will be set to TRUE for module removal when - * module_exit function is called. - */ -static u8 user_rmmod; +static void mwifiex_sdio_work(struct work_struct *work); static struct mwifiex_if_ops sdio_ops; -static unsigned long iface_work_flags; static struct memory_type_mapping generic_mem_type_map[] = { {"DUMP", NULL, 0, 0xDD}, @@ -116,7 +102,6 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) init_completion(&card->fw_done); card->func = func; - card->device_id = id; func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; @@ -136,6 +121,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) card->fw_dump_enh = data->fw_dump_enh; card->can_auto_tdls = data->can_auto_tdls; card->can_ext_scan = data->can_ext_scan; + INIT_WORK(&card->work, mwifiex_sdio_work); } sdio_claim_host(func); @@ -212,6 +198,171 @@ static int mwifiex_sdio_resume(struct device *dev) return 0; } +/* Write data into SDIO card register. Caller claims SDIO device. */ +static int +mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data) +{ + int ret = -1; + + sdio_writeb(func, data, reg, &ret); + return ret; +} + +/* This function writes data into SDIO card register. + */ +static int +mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + + sdio_claim_host(card->func); + ret = mwifiex_write_reg_locked(card->func, reg, data); + sdio_release_host(card->func); + + return ret; +} + +/* This function reads data from SDIO card register. + */ +static int +mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = -1; + u8 val; + + sdio_claim_host(card->func); + val = sdio_readb(card->func, reg, &ret); + sdio_release_host(card->func); + + *data = val; + + return ret; +} + +/* This function writes multiple data into SDIO card memory. + * + * This does not work in suspended mode. + */ +static int +mwifiex_write_data_sync(struct mwifiex_adapter *adapter, + u8 *buffer, u32 pkt_len, u32 port) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + u8 blk_mode = + (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; + u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; + u32 blk_cnt = + (blk_mode == + BLOCK_MODE) ? (pkt_len / + MWIFIEX_SDIO_BLOCK_SIZE) : pkt_len; + u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); + + if (adapter->is_suspended) { + mwifiex_dbg(adapter, ERROR, + "%s: not allowed while suspended\n", __func__); + return -1; + } + + sdio_claim_host(card->func); + + ret = sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size); + + sdio_release_host(card->func); + + return ret; +} + +/* This function reads multiple data from SDIO card memory. + */ +static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, + u32 len, u32 port, u8 claim) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE + : BLOCK_MODE; + u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; + u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE) + : len; + u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); + + if (claim) + sdio_claim_host(card->func); + + ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size); + + if (claim) + sdio_release_host(card->func); + + return ret; +} + +/* This function reads the firmware status. + */ +static int +mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat) +{ + struct sdio_mmc_card *card = adapter->card; + const struct mwifiex_sdio_card_reg *reg = card->reg; + u8 fws0, fws1; + + if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0)) + return -1; + + if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1)) + return -1; + + *dat = (u16)((fws1 << 8) | fws0); + return 0; +} + +/* This function checks the firmware status in card. + */ +static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter, + u32 poll_num) +{ + int ret = 0; + u16 firmware_stat; + u32 tries; + + for (tries = 0; tries < poll_num; tries++) { + ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat); + if (ret) + continue; + if (firmware_stat == FIRMWARE_READY_SDIO) { + ret = 0; + break; + } + + msleep(100); + ret = -1; + } + + return ret; +} + +/* This function checks if WLAN is the winner. + */ +static int mwifiex_check_winner_status(struct mwifiex_adapter *adapter) +{ + int ret = 0; + u8 winner = 0; + struct sdio_mmc_card *card = adapter->card; + + if (mwifiex_read_reg(adapter, card->reg->status_reg_0, &winner)) + return -1; + + if (winner) + adapter->winner = 0; + else + adapter->winner = 1; + + return ret; +} + /* * SDIO remove. * @@ -223,6 +374,8 @@ mwifiex_sdio_remove(struct sdio_func *func) struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; struct mwifiex_private *priv; + int ret = 0; + u16 firmware_stat; card = sdio_get_drvdata(func); if (!card) @@ -234,9 +387,12 @@ mwifiex_sdio_remove(struct sdio_func *func) if (!adapter || !adapter->priv_num) return; + cancel_work_sync(&card->work); + mwifiex_dbg(adapter, INFO, "info: SDIO func num=%d\n", func->num); - if (user_rmmod && !adapter->mfg_mode) { + ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat); + if (firmware_stat == FIRMWARE_READY_SDIO && !adapter->mfg_mode) { mwifiex_deauthenticate_all(adapter); priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); @@ -364,111 +520,6 @@ static struct sdio_driver mwifiex_sdio = { } }; -/* Write data into SDIO card register. Caller claims SDIO device. */ -static int -mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data) -{ - int ret = -1; - sdio_writeb(func, data, reg, &ret); - return ret; -} - -/* - * This function writes data into SDIO card register. - */ -static int -mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data) -{ - struct sdio_mmc_card *card = adapter->card; - int ret; - - sdio_claim_host(card->func); - ret = mwifiex_write_reg_locked(card->func, reg, data); - sdio_release_host(card->func); - - return ret; -} - -/* - * This function reads data from SDIO card register. - */ -static int -mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data) -{ - struct sdio_mmc_card *card = adapter->card; - int ret = -1; - u8 val; - - sdio_claim_host(card->func); - val = sdio_readb(card->func, reg, &ret); - sdio_release_host(card->func); - - *data = val; - - return ret; -} - -/* - * This function writes multiple data into SDIO card memory. - * - * This does not work in suspended mode. - */ -static int -mwifiex_write_data_sync(struct mwifiex_adapter *adapter, - u8 *buffer, u32 pkt_len, u32 port) -{ - struct sdio_mmc_card *card = adapter->card; - int ret; - u8 blk_mode = - (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; - u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; - u32 blk_cnt = - (blk_mode == - BLOCK_MODE) ? (pkt_len / - MWIFIEX_SDIO_BLOCK_SIZE) : pkt_len; - u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); - - if (adapter->is_suspended) { - mwifiex_dbg(adapter, ERROR, - "%s: not allowed while suspended\n", __func__); - return -1; - } - - sdio_claim_host(card->func); - - ret = sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size); - - sdio_release_host(card->func); - - return ret; -} - -/* - * This function reads multiple data from SDIO card memory. - */ -static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer, - u32 len, u32 port, u8 claim) -{ - struct sdio_mmc_card *card = adapter->card; - int ret; - u8 blk_mode = (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE - : BLOCK_MODE; - u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; - u32 blk_cnt = (blk_mode == BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE) - : len; - u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); - - if (claim) - sdio_claim_host(card->func); - - ret = sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size); - - if (claim) - sdio_release_host(card->func); - - return ret; -} - /* * This function wakes up the card. * @@ -755,27 +806,6 @@ mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits) } /* - * This function reads the firmware status. - */ -static int -mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat) -{ - struct sdio_mmc_card *card = adapter->card; - const struct mwifiex_sdio_card_reg *reg = card->reg; - u8 fws0, fws1; - - if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0)) - return -1; - - if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1)) - return -1; - - *dat = (u16) ((fws1 << 8) | fws0); - - return 0; -} - -/* * This function disables the host interrupt. * * The host interrupt mask is read, the disable bit is reset and @@ -1080,51 +1110,6 @@ done: } /* - * This function checks the firmware status in card. - */ -static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter, - u32 poll_num) -{ - int ret = 0; - u16 firmware_stat; - u32 tries; - - for (tries = 0; tries < poll_num; tries++) { - ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat); - if (ret) - continue; - if (firmware_stat == FIRMWARE_READY_SDIO) { - ret = 0; - break; - } else { - msleep(100); - ret = -1; - } - } - - return ret; -} - -/* This function checks if WLAN is the winner. - */ -static int mwifiex_check_winner_status(struct mwifiex_adapter *adapter) -{ - int ret = 0; - u8 winner = 0; - struct sdio_mmc_card *card = adapter->card; - - if (mwifiex_read_reg(adapter, card->reg->status_reg_0, &winner)) - return -1; - - if (winner) - adapter->winner = 0; - else - adapter->winner = 1; - - return ret; -} - -/* * This function decode sdio aggreation pkt. * * Based on the the data block size and pkt_len, @@ -2204,33 +2189,12 @@ mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port) port, card->mp_data_port_mask); } -static void mwifiex_recreate_adapter(struct sdio_mmc_card *card) +static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter) { + struct sdio_mmc_card *card = adapter->card; struct sdio_func *func = card->func; - const struct sdio_device_id *device_id = card->device_id; - - /* TODO mmc_hw_reset does not require destroying and re-probing the - * whole adapter. Hence there was no need to for this rube-goldberg - * design to reload the fw from an external workqueue. If we don't - * destroy the adapter we could reload the fw from - * mwifiex_main_work_queue directly. - * The real difficulty with fw reset is to restore all the user - * settings applied through ioctl. By destroying and recreating the - * adapter, we take the easy way out, since we rely on user space to - * restore them. We assume that user space will treat the new - * incarnation of the adapter(interfaces) as if they had been just - * discovered and initializes them from scratch. - */ - mwifiex_sdio_remove(func); - - /* - * Normally, we would let the driver core take care of releasing these. - * But we're not letting the driver core handle this one. See above - * TODO. - */ - sdio_set_drvdata(func, NULL); - devm_kfree(&func->dev, card); + mwifiex_shutdown_sw(adapter); /* power cycle the adapter */ sdio_claim_host(func); @@ -2240,24 +2204,10 @@ static void mwifiex_recreate_adapter(struct sdio_mmc_card *card) /* Previous save_adapter won't be valid after this. We will cancel * pending work requests. */ - clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &iface_work_flags); - clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &iface_work_flags); - - mwifiex_sdio_probe(func, device_id); -} - -static struct mwifiex_adapter *save_adapter; -static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter) -{ - struct sdio_mmc_card *card = adapter->card; + clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags); + clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags); - /* TODO card pointer is unprotected. If the adapter is removed - * physically, sdio core might trigger mwifiex_sdio_remove, before this - * workqueue is run, which will destroy the adapter struct. When this - * workqueue eventually exceutes it will dereference an invalid adapter - * pointer - */ - mwifiex_recreate_adapter(card); + mwifiex_reinit_sw(adapter); } /* This function read/write firmware */ @@ -2548,47 +2498,53 @@ done: static void mwifiex_sdio_device_dump_work(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; + int drv_info_size; + void *drv_info; - mwifiex_drv_info_dump(adapter); + drv_info_size = mwifiex_drv_info_dump(adapter, &drv_info); if (card->fw_dump_enh) mwifiex_sdio_generic_fw_dump(adapter); else mwifiex_sdio_fw_dump(adapter); - mwifiex_upload_device_dump(adapter); + mwifiex_upload_device_dump(adapter, drv_info, drv_info_size); } static void mwifiex_sdio_work(struct work_struct *work) { + struct sdio_mmc_card *card = + container_of(work, struct sdio_mmc_card, work); + if (test_and_clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, - &iface_work_flags)) - mwifiex_sdio_device_dump_work(save_adapter); + &card->work_flags)) + mwifiex_sdio_device_dump_work(card->adapter); if (test_and_clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, - &iface_work_flags)) - mwifiex_sdio_card_reset_work(save_adapter); + &card->work_flags)) + mwifiex_sdio_card_reset_work(card->adapter); } -static DECLARE_WORK(sdio_work, mwifiex_sdio_work); /* This function resets the card */ static void mwifiex_sdio_card_reset(struct mwifiex_adapter *adapter) { - save_adapter = adapter; - if (test_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &iface_work_flags)) + struct sdio_mmc_card *card = adapter->card; + + if (test_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags)) return; - set_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &iface_work_flags); + set_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags); - schedule_work(&sdio_work); + schedule_work(&card->work); } /* This function dumps FW information */ static void mwifiex_sdio_device_dump(struct mwifiex_adapter *adapter) { - save_adapter = adapter; - if (test_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &iface_work_flags)) + struct sdio_mmc_card *card = adapter->card; + + if (test_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags)) return; - set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &iface_work_flags); - schedule_work(&sdio_work); + set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags); + schedule_work(&card->work); } /* Function to dump SDIO function registers and SDIO scratch registers in case @@ -2684,6 +2640,33 @@ mwifiex_sdio_reg_dump(struct mwifiex_adapter *adapter, char *drv_buf) return p - drv_buf; } +/* sdio device/function initialization, code is extracted + * from init_if handler and register_dev handler. + */ +static void mwifiex_sdio_up_dev(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + u8 sdio_ireg; + + sdio_claim_host(card->func); + sdio_enable_func(card->func); + sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE); + sdio_release_host(card->func); + + /* tx_buf_size might be changed to 3584 by firmware during + * data transfer, we will reset to default size. + */ + adapter->tx_buf_size = card->tx_buf_size; + + /* Read the host_int_status_reg for ACK the first interrupt got + * from the bootloader. If we don't do this we get a interrupt + * as soon as we register the irq. + */ + mwifiex_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg); + + mwifiex_init_sdio_ioport(adapter); +} + static struct mwifiex_if_ops sdio_ops = { .init_if = mwifiex_init_sdio, .cleanup_if = mwifiex_cleanup_sdio, @@ -2709,43 +2692,10 @@ static struct mwifiex_if_ops sdio_ops = { .reg_dump = mwifiex_sdio_reg_dump, .device_dump = mwifiex_sdio_device_dump, .deaggr_pkt = mwifiex_deaggr_sdio_pkt, + .up_dev = mwifiex_sdio_up_dev, }; -/* - * This function initializes the SDIO driver. - * - * This registers the device with SDIO bus. - */ -static int -mwifiex_sdio_init_module(void) -{ - /* Clear the flag in case user removes the card. */ - user_rmmod = 0; - - return sdio_register_driver(&mwifiex_sdio); -} - -/* - * This function cleans up the SDIO driver. - * - * The following major steps are followed for cleanup - - * - Resume the device if its suspended - * - Disconnect the device if connected - * - Shutdown the firmware - * - Unregister the device from SDIO bus. - */ -static void -mwifiex_sdio_cleanup_module(void) -{ - /* Set the flag as user is removing this module. */ - user_rmmod = 1; - cancel_work_sync(&sdio_work); - - sdio_unregister_driver(&mwifiex_sdio); -} - -module_init(mwifiex_sdio_init_module); -module_exit(mwifiex_sdio_cleanup_module); +module_driver(mwifiex_sdio, sdio_register_driver, sdio_unregister_driver); MODULE_AUTHOR("Marvell International Ltd."); MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION); |