diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-trans.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-trans.h | 463 |
1 files changed, 348 insertions, 115 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index e6bf3f5..0c81cba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -5,7 +5,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved. + * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -30,7 +30,7 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -63,23 +63,132 @@ #ifndef __iwl_trans_h__ #define __iwl_trans_h__ -#include <linux/debugfs.h> -#include <linux/skbuff.h> +#include <linux/ieee80211.h> +#include <linux/mm.h> /* for page_address */ #include "iwl-shared.h" -#include "iwl-commands.h" +#include "iwl-debug.h" - /*This file includes the declaration that are exported from the transport - * layer */ +/** + * DOC: Transport layer - what is it ? + * + * The tranport layer is the layer that deals with the HW directly. It provides + * an abstraction of the underlying HW to the upper layer. The transport layer + * doesn't provide any policy, algorithm or anything of this kind, but only + * mechanisms to make the HW do something.It is not completely stateless but + * close to it. + * We will have an implementation for each different supported bus. + */ + +/** + * DOC: Life cycle of the transport layer + * + * The transport layer has a very precise life cycle. + * + * 1) A helper function is called during the module initialization and + * registers the bus driver's ops with the transport's alloc function. + * 2) Bus's probe calls to the transport layer's allocation functions. + * Of course this function is bus specific. + * 3) This allocation functions will spawn the upper layer which will + * register mac80211. + * + * 4) At some point (i.e. mac80211's start call), the op_mode will call + * the following sequence: + * start_hw + * start_fw + * + * 5) Then when finished (or reset): + * stop_fw (a.k.a. stop device for the moment) + * stop_hw + * + * 6) Eventually, the free function will be called. + */ struct iwl_priv; struct iwl_shared; +struct iwl_op_mode; +struct fw_img; +struct sk_buff; +struct dentry; +/** + * DOC: Host command section + * + * A host command is a commaned issued by the upper layer to the fw. There are + * several versions of fw that have several APIs. The transport layer is + * completely agnostic to these differences. + * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode), + */ #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) +#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) +#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) +#define SEQ_TO_INDEX(s) ((s) & 0xff) +#define INDEX_TO_SEQ(i) ((i) & 0xff) +#define SEQ_RX_FRAME cpu_to_le16(0x8000) + +/** + * struct iwl_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ +struct iwl_cmd_header { + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ + /* + * The driver sets up the sequence number to values of its choosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. + * + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. + * + * The Linux driver uses the following format: + * + * 0:7 tfd index - position within TX queue + * 8:12 TX queue id + * 13:14 reserved + * 15 unsolicited RX or uCode-originated notification + */ + __le16 sequence; +} __packed; + -enum { +#define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ + +struct iwl_rx_packet { + /* + * The first 4 bytes of the RX frame header contain both the RX frame + * size and some flags. + * Bit fields: + * 31: flag flush RB request + * 30: flag ignore TC (terminal counter) request + * 29: flag fast IRQ request + * 28-14: Reserved + * 13-00: RX frame size + */ + __le32 len_n_flags; + struct iwl_cmd_header hdr; + u8 data[]; +} __packed; + +/** + * enum CMD_MODE - how to send the host commands ? + * + * @CMD_SYNC: The caller will be stalled until the fw responds to the command + * @CMD_ASYNC: Return right away and don't want for the response + * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the + * response. + * @CMD_ON_DEMAND: This command is sent by the test mode pipe. + */ +enum CMD_MODE { CMD_SYNC = 0, CMD_ASYNC = BIT(0), CMD_WANT_SKB = BIT(1), @@ -104,25 +213,38 @@ struct iwl_device_cmd { #define IWL_MAX_CMD_TFDS 2 +/** + * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command + * + * IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's + * ring. The transport layer doesn't map the command's buffer to DMA, but + * rather copies it to an previously allocated DMA buffer. This flag tells + * the transport layer not to copy the command, but to map the existing + * buffer. This can save memcpy and is worth with very big comamnds. + */ enum iwl_hcmd_dataflag { IWL_HCMD_DFL_NOCOPY = BIT(0), }; /** * struct iwl_host_cmd - Host command to the uCode + * * @data: array of chunks that composes the data of the host command - * @reply_page: pointer to the page that holds the response to the host command + * @resp_pkt: response packet, if %CMD_WANT_SKB was set + * @_rx_page_order: (internally used to free response packet) + * @_rx_page_addr: (internally used to free response packet) * @handler_status: return value of the handler of the command * (put in setup_rx_handlers) - valid for SYNC mode only - * @callback: - * @flags: can be CMD_* note CMD_WANT_SKB is incompatible withe CMD_ASYNC + * @flags: can be CMD_* * @len: array of the lenths of the chunks in data - * @dataflags: + * @dataflags: IWL_HCMD_DFL_* * @id: id of the host command */ struct iwl_host_cmd { const void *data[IWL_MAX_CMD_TFDS]; - unsigned long reply_page; + struct iwl_rx_packet *resp_pkt; + unsigned long _rx_page_addr; + u32 _rx_page_order; int handler_status; u32 flags; @@ -131,48 +253,109 @@ struct iwl_host_cmd { u8 id; }; +static inline void iwl_free_resp(struct iwl_host_cmd *cmd) +{ + free_pages(cmd->_rx_page_addr, cmd->_rx_page_order); +} + +struct iwl_rx_cmd_buffer { + struct page *_page; +}; + +static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) +{ + return page_address(r->_page); +} + +static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) +{ + struct page *p = r->_page; + r->_page = NULL; + return p; +} + +#define MAX_NO_RECLAIM_CMDS 6 + +/** + * struct iwl_trans_config - transport configuration + * + * @op_mode: pointer to the upper layer. + * Must be set before any other call. + * @cmd_queue: the index of the command queue. + * Must be set before start_fw. + * @no_reclaim_cmds: Some devices erroneously don't set the + * SEQ_RX_FRAME bit on some notifications, this is the + * list of such notifications to filter. Max length is + * %MAX_NO_RECLAIM_CMDS. + * @n_no_reclaim_cmds: # of commands in list + */ +struct iwl_trans_config { + struct iwl_op_mode *op_mode; + u8 cmd_queue; + const u8 *no_reclaim_cmds; + int n_no_reclaim_cmds; +}; + /** * struct iwl_trans_ops - transport specific operations - * @alloc: allocates the meta data (not the queues themselves) - * @request_irq: requests IRQ - will be called before the FW load in probe flow - * @start_device: allocates and inits all the resources for the transport - * layer. - * @prepare_card_hw: claim the ownership on the HW. Will be called during - * probe. - * @tx_start: starts and configures all the Tx fifo - usually done once the fw - * is alive. - * @wake_any_queue: wake all the queues of a specfic context IWL_RXON_CTX_* + * + * All the handlers MUST be implemented + * + * @start_hw: starts the HW- from that point on, the HW can send interrupts + * May sleep + * @stop_hw: stops the HW- from that point on, the HW will be in low power but + * will still issue interrupt if the HW RF kill is triggered. + * May sleep + * @start_fw: allocates and inits all the resources for the transport + * layer. Also kick a fw image. + * May sleep + * @fw_alive: called when the fw sends alive notification + * May sleep * @stop_device:stops the whole device (embedded CPU put to reset) + * May sleep + * @wowlan_suspend: put the device into the correct mode for WoWLAN during + * suspend. This is optional, if not implemented WoWLAN will not be + * supported. This callback may sleep. * @send_cmd:send a host command + * May sleep only if CMD_SYNC is set * @tx: send an skb + * Must be atomic * @reclaim: free packet until ssn. Returns a list of freed packets. + * Must be atomic * @tx_agg_alloc: allocate resources for a TX BA session + * Must be atomic * @tx_agg_setup: setup a tx queue for AMPDU - will be called once the HW is - * ready and a successful ADDBA response has been received. + * ready and a successful ADDBA response has been received. + * May sleep * @tx_agg_disable: de-configure a Tx queue to send AMPDUs - * @kick_nic: remove the RESET from the embedded CPU and let it run + * Must be atomic * @free: release all the ressource for the transport layer itself such as - * irq, tasklet etc... - * @stop_queue: stop a specific queue + * irq, tasklet etc... From this point on, the device may not issue + * any interrupt (incl. RFKILL). + * May sleep * @check_stuck_queue: check if a specific queue is stuck * @wait_tx_queue_empty: wait until all tx queues are empty + * May sleep * @dbgfs_register: add the dbgfs files under this directory. Files will be * automatically deleted. * @suspend: stop the device unless WoWLAN is configured * @resume: resume activity of the device + * @write8: write a u8 to a register at offset ofs from the BAR + * @write32: write a u32 to a register at offset ofs from the BAR + * @read32: read a u32 register at offset ofs from the BAR + * @configure: configure parameters required by the transport layer from + * the op_mode. May be called several times before start_fw, can't be + * called after that. */ struct iwl_trans_ops { - struct iwl_trans *(*alloc)(struct iwl_shared *shrd); - int (*request_irq)(struct iwl_trans *iwl_trans); - int (*start_device)(struct iwl_trans *trans); - int (*prepare_card_hw)(struct iwl_trans *trans); + int (*start_hw)(struct iwl_trans *iwl_trans); + void (*stop_hw)(struct iwl_trans *iwl_trans); + int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw); + void (*fw_alive)(struct iwl_trans *trans); void (*stop_device)(struct iwl_trans *trans); - void (*tx_start)(struct iwl_trans *trans); - void (*wake_any_queue)(struct iwl_trans *trans, - enum iwl_rxon_context_id ctx, - const char *msg); + void (*wowlan_suspend)(struct iwl_trans *trans); int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); @@ -180,8 +363,7 @@ struct iwl_trans_ops { struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, u8 sta_id, u8 tid); int (*reclaim)(struct iwl_trans *trans, int sta_id, int tid, - int txq_id, int ssn, u32 status, - struct sk_buff_head *skbs); + int txq_id, int ssn, struct sk_buff_head *skbs); int (*tx_agg_disable)(struct iwl_trans *trans, int sta_id, int tid); @@ -191,12 +373,8 @@ struct iwl_trans_ops { enum iwl_rxon_context_id ctx, int sta_id, int tid, int frame_limit, u16 ssn); - void (*kick_nic)(struct iwl_trans *trans); - void (*free)(struct iwl_trans *trans); - void (*stop_queue)(struct iwl_trans *trans, int q, const char *msg); - int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir); int (*check_stuck_queue)(struct iwl_trans *trans, int q); int (*wait_tx_queue_empty)(struct iwl_trans *trans); @@ -204,127 +382,165 @@ struct iwl_trans_ops { int (*suspend)(struct iwl_trans *trans); int (*resume)(struct iwl_trans *trans); #endif + void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); + void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); + u32 (*read32)(struct iwl_trans *trans, u32 ofs); + void (*configure)(struct iwl_trans *trans, + const struct iwl_trans_config *trans_cfg); }; -/* one for each uCode image (inst/data, boot/init/runtime) */ -struct fw_desc { - dma_addr_t p_addr; /* hardware address */ - void *v_addr; /* software address */ - u32 len; /* size in bytes */ -}; - -struct fw_img { - struct fw_desc code; /* firmware code image */ - struct fw_desc data; /* firmware data image */ -}; - -/* Opaque calibration results */ -struct iwl_calib_result { - struct list_head list; - size_t cmd_len; - struct iwl_calib_hdr hdr; - /* data follows */ +/** + * enum iwl_trans_state - state of the transport layer + * + * @IWL_TRANS_NO_FW: no fw has sent an alive response + * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response + */ +enum iwl_trans_state { + IWL_TRANS_NO_FW = 0, + IWL_TRANS_FW_ALIVE = 1, }; /** * struct iwl_trans - transport common data + * * @ops - pointer to iwl_trans_ops + * @op_mode - pointer to the op_mode * @shrd - pointer to iwl_shared which holds shared data from the upper layer - * @hcmd_lock: protects HCMD - * @ucode_write_complete: indicates that the ucode has been copied. - * @ucode_rt: run time ucode image - * @ucode_init: init ucode image - * @ucode_wowlan: wake on wireless ucode image (optional) + * @reg_lock - protect hw register access + * @dev - pointer to struct device * that represents the device + * @hw_id: a u32 with the ID of the device / subdevice. + * Set during transport allocation. + * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @nvm_device_type: indicates OTP or eeprom - * @calib_results: list head for init calibration results + * @pm_support: set to true in start_hw if link pm is supported + * @wait_command_queue: the wait_queue for SYNC host commands */ struct iwl_trans { const struct iwl_trans_ops *ops; + struct iwl_op_mode *op_mode; struct iwl_shared *shrd; - spinlock_t hcmd_lock; + enum iwl_trans_state state; + spinlock_t reg_lock; - u8 ucode_write_complete; /* the image write is complete */ - struct fw_img ucode_rt; - struct fw_img ucode_init; - struct fw_img ucode_wowlan; + struct device *dev; + u32 hw_rev; + u32 hw_id; + char hw_id_str[52]; - /* eeprom related variables */ int nvm_device_type; + bool pm_support; - /* init calibration results */ - struct list_head calib_results; + wait_queue_head_t wait_command_queue; /* pointer to trans specific struct */ /*Ensure that this pointer will always be aligned to sizeof pointer */ - char trans_specific[0] __attribute__((__aligned__(sizeof(void *)))); + char trans_specific[0] __aligned(sizeof(void *)); }; -static inline int iwl_trans_request_irq(struct iwl_trans *trans) +static inline void iwl_trans_configure(struct iwl_trans *trans, + const struct iwl_trans_config *trans_cfg) { - return trans->ops->request_irq(trans); + /* + * only set the op_mode for the moment. Later on, this function will do + * more + */ + trans->op_mode = trans_cfg->op_mode; + + trans->ops->configure(trans, trans_cfg); } -static inline int iwl_trans_start_device(struct iwl_trans *trans) +static inline int iwl_trans_start_hw(struct iwl_trans *trans) { - return trans->ops->start_device(trans); + might_sleep(); + + return trans->ops->start_hw(trans); } -static inline int iwl_trans_prepare_card_hw(struct iwl_trans *trans) +static inline void iwl_trans_stop_hw(struct iwl_trans *trans) { - return trans->ops->prepare_card_hw(trans); + might_sleep(); + + trans->ops->stop_hw(trans); + + trans->state = IWL_TRANS_NO_FW; } -static inline void iwl_trans_stop_device(struct iwl_trans *trans) +static inline void iwl_trans_fw_alive(struct iwl_trans *trans) { - trans->ops->stop_device(trans); + might_sleep(); + + trans->ops->fw_alive(trans); + + trans->state = IWL_TRANS_FW_ALIVE; } -static inline void iwl_trans_tx_start(struct iwl_trans *trans) +static inline int iwl_trans_start_fw(struct iwl_trans *trans, + const struct fw_img *fw) { - trans->ops->tx_start(trans); + might_sleep(); + + return trans->ops->start_fw(trans, fw); } -static inline void iwl_trans_wake_any_queue(struct iwl_trans *trans, - enum iwl_rxon_context_id ctx, - const char *msg) +static inline void iwl_trans_stop_device(struct iwl_trans *trans) { - trans->ops->wake_any_queue(trans, ctx, msg); + might_sleep(); + + trans->ops->stop_device(trans); + + trans->state = IWL_TRANS_NO_FW; } +static inline void iwl_trans_wowlan_suspend(struct iwl_trans *trans) +{ + might_sleep(); + trans->ops->wowlan_suspend(trans); +} static inline int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd) { + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + return trans->ops->send_cmd(trans, cmd); } -int iwl_trans_send_cmd_pdu(struct iwl_trans *trans, u8 id, - u32 flags, u16 len, const void *data); - static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, u8 sta_id, u8 tid) { + if (trans->state != IWL_TRANS_FW_ALIVE) + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); + return trans->ops->tx(trans, skb, dev_cmd, ctx, sta_id, tid); } static inline int iwl_trans_reclaim(struct iwl_trans *trans, int sta_id, - int tid, int txq_id, int ssn, u32 status, + int tid, int txq_id, int ssn, struct sk_buff_head *skbs) { - return trans->ops->reclaim(trans, sta_id, tid, txq_id, ssn, - status, skbs); + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + + return trans->ops->reclaim(trans, sta_id, tid, txq_id, ssn, skbs); } static inline int iwl_trans_tx_agg_disable(struct iwl_trans *trans, int sta_id, int tid) { + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + return trans->ops->tx_agg_disable(trans, sta_id, tid); } static inline int iwl_trans_tx_agg_alloc(struct iwl_trans *trans, int sta_id, int tid) { + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + return trans->ops->tx_agg_alloc(trans, sta_id, tid); } @@ -334,12 +550,12 @@ static inline void iwl_trans_tx_agg_setup(struct iwl_trans *trans, int sta_id, int tid, int frame_limit, u16 ssn) { - trans->ops->tx_agg_setup(trans, ctx, sta_id, tid, frame_limit, ssn); -} + might_sleep(); -static inline void iwl_trans_kick_nic(struct iwl_trans *trans) -{ - trans->ops->kick_nic(trans); + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + + trans->ops->tx_agg_setup(trans, ctx, sta_id, tid, frame_limit, ssn); } static inline void iwl_trans_free(struct iwl_trans *trans) @@ -347,19 +563,19 @@ static inline void iwl_trans_free(struct iwl_trans *trans) trans->ops->free(trans); } -static inline void iwl_trans_stop_queue(struct iwl_trans *trans, int q, - const char *msg) -{ - trans->ops->stop_queue(trans, q, msg); -} - static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans) { + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + return trans->ops->wait_tx_queue_empty(trans); } static inline int iwl_trans_check_stuck_queue(struct iwl_trans *trans, int q) { + WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, + "%s bad state = %d", __func__, trans->state); + return trans->ops->check_stuck_queue(trans, q); } static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans, @@ -380,18 +596,35 @@ static inline int iwl_trans_resume(struct iwl_trans *trans) } #endif -/***************************************************** -* Transport layers implementations -******************************************************/ -extern const struct iwl_trans_ops trans_ops_pcie; +static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) +{ + trans->ops->write8(trans, ofs, val); +} -int iwl_alloc_fw_desc(struct iwl_bus *bus, struct fw_desc *desc, - const void *data, size_t len); -void iwl_dealloc_ucode(struct iwl_trans *trans); +static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val) +{ + trans->ops->write32(trans, ofs, val); +} -int iwl_send_calib_results(struct iwl_trans *trans); -int iwl_calib_set(struct iwl_trans *trans, - const struct iwl_calib_hdr *cmd, int len); -void iwl_calib_free_results(struct iwl_trans *trans); +static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs) +{ + return trans->ops->read32(trans, ofs); +} +/***************************************************** +* Transport layers implementations + their allocation function +******************************************************/ +struct pci_dev; +struct pci_device_id; +extern const struct iwl_trans_ops trans_ops_pcie; +struct iwl_trans *iwl_trans_pcie_alloc(struct iwl_shared *shrd, + struct pci_dev *pdev, + const struct pci_device_id *ent); +int __must_check iwl_pci_register_driver(void); +void iwl_pci_unregister_driver(void); + +extern const struct iwl_trans_ops trans_ops_idi; +struct iwl_trans *iwl_trans_idi_alloc(struct iwl_shared *shrd, + void *pdev_void, + const void *ent_void); #endif /* __iwl_trans_h__ */ |
