diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c | 900 |
1 files changed, 900 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c new file mode 100644 index 0000000..c87a05c --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c @@ -0,0 +1,900 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/export.h> +#include "iwl-modparams.h" +#include "iwl-eeprom-parse.h" + +/* EEPROM offset definitions */ + +/* indirect access definitions */ +#define ADDRESS_MSK 0x0000FFFF +#define INDIRECT_TYPE_MSK 0x000F0000 +#define INDIRECT_HOST 0x00010000 +#define INDIRECT_GENERAL 0x00020000 +#define INDIRECT_REGULATORY 0x00030000 +#define INDIRECT_CALIBRATION 0x00040000 +#define INDIRECT_PROCESS_ADJST 0x00050000 +#define INDIRECT_OTHERS 0x00060000 +#define INDIRECT_TXP_LIMIT 0x00070000 +#define INDIRECT_TXP_LIMIT_SIZE 0x00080000 +#define INDIRECT_ADDRESS 0x00100000 + +/* corresponding link offsets in EEPROM */ +#define EEPROM_LINK_HOST (2*0x64) +#define EEPROM_LINK_GENERAL (2*0x65) +#define EEPROM_LINK_REGULATORY (2*0x66) +#define EEPROM_LINK_CALIBRATION (2*0x67) +#define EEPROM_LINK_PROCESS_ADJST (2*0x68) +#define EEPROM_LINK_OTHERS (2*0x69) +#define EEPROM_LINK_TXP_LIMIT (2*0x6a) +#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) + +/* General */ +#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ +#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */ +#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ +#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ +#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ +#define EEPROM_VERSION (2*0x44) /* 2 bytes */ +#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ +#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ +#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ +#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ + +/* calibration */ +struct iwl_eeprom_calib_hdr { + u8 version; + u8 pa_type; + __le16 voltage; +} __packed; + +#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) +#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL) + +/* temperature */ +#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL) +#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL) + +/* + * EEPROM bands + * These are the channel numbers from each band in the order + * that they are stored in the EEPROM band information. Note + * that EEPROM bands aren't the same as mac80211 bands, and + * there are even special "ht40 bands" in the EEPROM. + */ +static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */ + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 +}; + +static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */ + 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 +}; + +static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */ + 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 +}; + +static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */ + 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 +}; + +static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */ + 145, 149, 153, 157, 161, 165 +}; + +static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */ + 1, 2, 3, 4, 5, 6, 7 +}; + +static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */ + 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 +}; + +#define IWL_NUM_CHANNELS (ARRAY_SIZE(iwl_eeprom_band_1) + \ + ARRAY_SIZE(iwl_eeprom_band_2) + \ + ARRAY_SIZE(iwl_eeprom_band_3) + \ + ARRAY_SIZE(iwl_eeprom_band_4) + \ + ARRAY_SIZE(iwl_eeprom_band_5)) + +/* rate data (static) */ +static struct ieee80211_rate iwl_cfg80211_rates[] = { + { .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, }, + { .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, }, + { .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, }, + { .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, }, + { .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, }, + { .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, }, + { .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, }, + { .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, }, + { .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, }, +}; +#define RATES_24_OFFS 0 +#define N_RATES_24 ARRAY_SIZE(iwl_cfg80211_rates) +#define RATES_52_OFFS 4 +#define N_RATES_52 (N_RATES_24 - RATES_52_OFFS) + +/* EEPROM reading functions */ + +static u16 iwl_eeprom_query16(const u8 *eeprom, size_t eeprom_size, int offset) +{ + if (WARN_ON(offset + sizeof(u16) > eeprom_size)) + return 0; + return le16_to_cpup((__le16 *)(eeprom + offset)); +} + +static u32 eeprom_indirect_address(const u8 *eeprom, size_t eeprom_size, + u32 address) +{ + u16 offset = 0; + + if ((address & INDIRECT_ADDRESS) == 0) + return address; + + switch (address & INDIRECT_TYPE_MSK) { + case INDIRECT_HOST: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_HOST); + break; + case INDIRECT_GENERAL: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_GENERAL); + break; + case INDIRECT_REGULATORY: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_REGULATORY); + break; + case INDIRECT_TXP_LIMIT: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_TXP_LIMIT); + break; + case INDIRECT_TXP_LIMIT_SIZE: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_TXP_LIMIT_SIZE); + break; + case INDIRECT_CALIBRATION: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_CALIBRATION); + break; + case INDIRECT_PROCESS_ADJST: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_PROCESS_ADJST); + break; + case INDIRECT_OTHERS: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_OTHERS); + break; + default: + WARN_ON(1); + break; + } + + /* translate the offset from words to byte */ + return (address & ADDRESS_MSK) + (offset << 1); +} + +static const u8 *iwl_eeprom_query_addr(const u8 *eeprom, size_t eeprom_size, + u32 offset) +{ + u32 address = eeprom_indirect_address(eeprom, eeprom_size, offset); + + if (WARN_ON(address >= eeprom_size)) + return NULL; + + return &eeprom[address]; +} + +static int iwl_eeprom_read_calib(const u8 *eeprom, size_t eeprom_size, + struct iwl_eeprom_data *data) +{ + struct iwl_eeprom_calib_hdr *hdr; + + hdr = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_CALIB_ALL); + if (!hdr) + return -ENODATA; + data->calib_version = hdr->version; + data->calib_voltage = hdr->voltage; + + return 0; +} + +/** + * enum iwl_eeprom_channel_flags - channel flags in EEPROM + * @EEPROM_CHANNEL_VALID: channel is usable for this SKU/geo + * @EEPROM_CHANNEL_IBSS: usable as an IBSS channel + * @EEPROM_CHANNEL_ACTIVE: active scanning allowed + * @EEPROM_CHANNEL_RADAR: radar detection required + * @EEPROM_CHANNEL_WIDE: 20 MHz channel okay (?) + * @EEPROM_CHANNEL_DFS: dynamic freq selection candidate + */ +enum iwl_eeprom_channel_flags { + EEPROM_CHANNEL_VALID = BIT(0), + EEPROM_CHANNEL_IBSS = BIT(1), + EEPROM_CHANNEL_ACTIVE = BIT(3), + EEPROM_CHANNEL_RADAR = BIT(4), + EEPROM_CHANNEL_WIDE = BIT(5), + EEPROM_CHANNEL_DFS = BIT(7), +}; + +/** + * struct iwl_eeprom_channel - EEPROM channel data + * @flags: %EEPROM_CHANNEL_* flags + * @max_power_avg: max power (in dBm) on this channel, at most 31 dBm + */ +struct iwl_eeprom_channel { + u8 flags; + s8 max_power_avg; +} __packed; + + +enum iwl_eeprom_enhanced_txpwr_flags { + IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), + IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), + IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), + IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), + IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), + IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), + IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), + IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), +}; + +/** + * iwl_eeprom_enhanced_txpwr structure + * @flags: entry flags + * @channel: channel number + * @chain_a_max_pwr: chain a max power in 1/2 dBm + * @chain_b_max_pwr: chain b max power in 1/2 dBm + * @chain_c_max_pwr: chain c max power in 1/2 dBm + * @delta_20_in_40: 20-in-40 deltas (hi/lo) + * @mimo2_max_pwr: mimo2 max power in 1/2 dBm + * @mimo3_max_pwr: mimo3 max power in 1/2 dBm + * + * This structure presents the enhanced regulatory tx power limit layout + * in an EEPROM image. + */ +struct iwl_eeprom_enhanced_txpwr { + u8 flags; + u8 channel; + s8 chain_a_max; + s8 chain_b_max; + s8 chain_c_max; + u8 delta_20_in_40; + s8 mimo2_max; + s8 mimo3_max; +} __packed; + +static s8 iwl_get_max_txpwr_half_dbm(const struct iwl_eeprom_data *data, + struct iwl_eeprom_enhanced_txpwr *txp) +{ + s8 result = 0; /* (.5 dBm) */ + + /* Take the highest tx power from any valid chains */ + if (data->valid_tx_ant & ANT_A && txp->chain_a_max > result) + result = txp->chain_a_max; + + if (data->valid_tx_ant & ANT_B && txp->chain_b_max > result) + result = txp->chain_b_max; + + if (data->valid_tx_ant & ANT_C && txp->chain_c_max > result) + result = txp->chain_c_max; + + if ((data->valid_tx_ant == ANT_AB || + data->valid_tx_ant == ANT_BC || + data->valid_tx_ant == ANT_AC) && txp->mimo2_max > result) + result = txp->mimo2_max; + + if (data->valid_tx_ant == ANT_ABC && txp->mimo3_max > result) + result = txp->mimo3_max; + + return result; +} + +#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT) +#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr) +#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE) + +#define TXP_CHECK_AND_PRINT(x) \ + ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) ? # x " " : "") + +static void +iwl_eeprom_enh_txp_read_element(struct iwl_eeprom_data *data, + struct iwl_eeprom_enhanced_txpwr *txp, + int n_channels, s8 max_txpower_avg) +{ + int ch_idx; + enum ieee80211_band band; + + band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ? + IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ; + + for (ch_idx = 0; ch_idx < n_channels; ch_idx++) { + struct ieee80211_channel *chan = &data->channels[ch_idx]; + + /* update matching channel or from common data only */ + if (txp->channel != 0 && chan->hw_value != txp->channel) + continue; + + /* update matching band only */ + if (band != chan->band) + continue; + + if (chan->max_power < max_txpower_avg && + !(txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ)) + chan->max_power = max_txpower_avg; + } +} + +static void iwl_eeprom_enhanced_txpower(struct device *dev, + struct iwl_eeprom_data *data, + const u8 *eeprom, size_t eeprom_size, + int n_channels) +{ + struct iwl_eeprom_enhanced_txpwr *txp_array, *txp; + int idx, entries; + __le16 *txp_len; + s8 max_txp_avg_halfdbm; + + BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8); + + /* the length is in 16-bit words, but we want entries */ + txp_len = (__le16 *)iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_TXP_SZ_OFFS); + entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN; + + txp_array = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_TXP_OFFS); + + for (idx = 0; idx < entries; idx++) { + txp = &txp_array[idx]; + /* skip invalid entries */ + if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID)) + continue; + + IWL_DEBUG_EEPROM(dev, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n", + (txp->channel && (txp->flags & + IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ? + "Common " : (txp->channel) ? + "Channel" : "Common", + (txp->channel), + TXP_CHECK_AND_PRINT(VALID), + TXP_CHECK_AND_PRINT(BAND_52G), + TXP_CHECK_AND_PRINT(OFDM), + TXP_CHECK_AND_PRINT(40MHZ), + TXP_CHECK_AND_PRINT(HT_AP), + TXP_CHECK_AND_PRINT(RES1), + TXP_CHECK_AND_PRINT(RES2), + TXP_CHECK_AND_PRINT(COMMON_TYPE), + txp->flags); + IWL_DEBUG_EEPROM(dev, + "\t\t chain_A: 0x%02x chain_B: 0X%02x chain_C: 0X%02x\n", + txp->chain_a_max, txp->chain_b_max, + txp->chain_c_max); + IWL_DEBUG_EEPROM(dev, + "\t\t MIMO2: 0x%02x MIMO3: 0x%02x High 20_on_40: 0x%02x Low 20_on_40: 0x%02x\n", + txp->mimo2_max, txp->mimo3_max, + ((txp->delta_20_in_40 & 0xf0) >> 4), + (txp->delta_20_in_40 & 0x0f)); + + max_txp_avg_halfdbm = iwl_get_max_txpwr_half_dbm(data, txp); + + iwl_eeprom_enh_txp_read_element(data, txp, n_channels, + DIV_ROUND_UP(max_txp_avg_halfdbm, 2)); + + if (max_txp_avg_halfdbm > data->max_tx_pwr_half_dbm) + data->max_tx_pwr_half_dbm = max_txp_avg_halfdbm; + } +} + +static void iwl_init_band_reference(const struct iwl_cfg *cfg, + const u8 *eeprom, size_t eeprom_size, + int eeprom_band, int *eeprom_ch_count, + const struct iwl_eeprom_channel **ch_info, + const u8 **eeprom_ch_array) +{ + u32 offset = cfg->eeprom_params->regulatory_bands[eeprom_band - 1]; + + offset |= INDIRECT_ADDRESS | INDIRECT_REGULATORY; + + *ch_info = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, offset); + + switch (eeprom_band) { + case 1: /* 2.4GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); + *eeprom_ch_array = iwl_eeprom_band_1; + break; + case 2: /* 4.9GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); + *eeprom_ch_array = iwl_eeprom_band_2; + break; + case 3: /* 5.2GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); + *eeprom_ch_array = iwl_eeprom_band_3; + break; + case 4: /* 5.5GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); + *eeprom_ch_array = iwl_eeprom_band_4; + break; + case 5: /* 5.7GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); + *eeprom_ch_array = iwl_eeprom_band_5; + break; + case 6: /* 2.4GHz ht40 channels */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); + *eeprom_ch_array = iwl_eeprom_band_6; + break; + case 7: /* 5 GHz ht40 channels */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); + *eeprom_ch_array = iwl_eeprom_band_7; + break; + default: + *eeprom_ch_count = 0; + *eeprom_ch_array = NULL; + WARN_ON(1); + } +} + +#define CHECK_AND_PRINT(x) \ + ((eeprom_ch->flags & EEPROM_CHANNEL_##x) ? # x " " : "") + +static void iwl_mod_ht40_chan_info(struct device *dev, + struct iwl_eeprom_data *data, int n_channels, + enum ieee80211_band band, u16 channel, + const struct iwl_eeprom_channel *eeprom_ch, + u8 clear_ht40_extension_channel) +{ + struct ieee80211_channel *chan = NULL; + int i; + + for (i = 0; i < n_channels; i++) { + if (data->channels[i].band != band) + continue; + if (data->channels[i].hw_value != channel) + continue; + chan = &data->channels[i]; + break; + } + + if (!chan) + return; + + IWL_DEBUG_EEPROM(dev, + "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + channel, + band == IEEE80211_BAND_5GHZ ? "5.2" : "2.4", + CHECK_AND_PRINT(IBSS), + CHECK_AND_PRINT(ACTIVE), + CHECK_AND_PRINT(RADAR), + CHECK_AND_PRINT(WIDE), + CHECK_AND_PRINT(DFS), + eeprom_ch->flags, + eeprom_ch->max_power_avg, + ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) && + !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? "" + : "not "); + + if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) + chan->flags &= ~clear_ht40_extension_channel; +} + +#define CHECK_AND_PRINT_I(x) \ + ((eeprom_ch_info[ch_idx].flags & EEPROM_CHANNEL_##x) ? # x " " : "") + +static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, + struct iwl_eeprom_data *data, + const u8 *eeprom, size_t eeprom_size) +{ + int band, ch_idx; + const struct iwl_eeprom_channel *eeprom_ch_info; + const u8 *eeprom_ch_array; + int eeprom_ch_count; + int n_channels = 0; + + /* + * Loop through the 5 EEPROM bands and add them to the parse list + */ + for (band = 1; band <= 5; band++) { + struct ieee80211_channel *channel; + + iwl_init_band_reference(cfg, eeprom, eeprom_size, band, + &eeprom_ch_count, &eeprom_ch_info, + &eeprom_ch_array); + + /* Loop through each band adding each of the channels */ + for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) { + const struct iwl_eeprom_channel *eeprom_ch; + + eeprom_ch = &eeprom_ch_info[ch_idx]; + + if (!(eeprom_ch->flags & EEPROM_CHANNEL_VALID)) { + IWL_DEBUG_EEPROM(dev, + "Ch. %d Flags %x [%sGHz] - No traffic\n", + eeprom_ch_array[ch_idx], + eeprom_ch_info[ch_idx].flags, + (band != 1) ? "5.2" : "2.4"); + continue; + } + + channel = &data->channels[n_channels]; + n_channels++; + + channel->hw_value = eeprom_ch_array[ch_idx]; + channel->band = (band == 1) ? IEEE80211_BAND_2GHZ + : IEEE80211_BAND_5GHZ; + channel->center_freq = + ieee80211_channel_to_frequency( + channel->hw_value, channel->band); + + /* set no-HT40, will enable as appropriate later */ + channel->flags = IEEE80211_CHAN_NO_HT40; + + if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS)) + channel->flags |= IEEE80211_CHAN_NO_IBSS; + + if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE)) + channel->flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR) + channel->flags |= IEEE80211_CHAN_RADAR; + + /* Initialize regulatory-based run-time data */ + channel->max_power = + eeprom_ch_info[ch_idx].max_power_avg; + IWL_DEBUG_EEPROM(dev, + "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + channel->hw_value, + (band != 1) ? "5.2" : "2.4", + CHECK_AND_PRINT_I(VALID), + CHECK_AND_PRINT_I(IBSS), + CHECK_AND_PRINT_I(ACTIVE), + CHECK_AND_PRINT_I(RADAR), + CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(DFS), + eeprom_ch_info[ch_idx].flags, + eeprom_ch_info[ch_idx].max_power_avg, + ((eeprom_ch_info[ch_idx].flags & + EEPROM_CHANNEL_IBSS) && + !(eeprom_ch_info[ch_idx].flags & + EEPROM_CHANNEL_RADAR)) + ? "" : "not "); + } + } + + if (cfg->eeprom_params->enhanced_txpower) { + /* + * for newer device (6000 series and up) + * EEPROM contain enhanced tx power information + * driver need to process addition information + * to determine the max channel tx power limits + */ + iwl_eeprom_enhanced_txpower(dev, data, eeprom, eeprom_size, + n_channels); + } else { + /* All others use data from channel map */ + int i; + + data->max_tx_pwr_half_dbm = -128; + + for (i = 0; i < n_channels; i++) + data->max_tx_pwr_half_dbm = + max_t(s8, data->max_tx_pwr_half_dbm, + data->channels[i].max_power * 2); + } + + /* Check if we do have HT40 channels */ + if (cfg->eeprom_params->regulatory_bands[5] == + EEPROM_REGULATORY_BAND_NO_HT40 && + cfg->eeprom_params->regulatory_bands[6] == + EEPROM_REGULATORY_BAND_NO_HT40) + return n_channels; + + /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */ + for (band = 6; band <= 7; band++) { + enum ieee80211_band ieeeband; + + iwl_init_band_reference(cfg, eeprom, eeprom_size, band, + &eeprom_ch_count, &eeprom_ch_info, + &eeprom_ch_array); + + /* EEPROM band 6 is 2.4, band 7 is 5 GHz */ + ieeeband = (band == 6) ? IEEE80211_BAND_2GHZ + : IEEE80211_BAND_5GHZ; + + /* Loop through each band adding each of the channels */ + for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) { + /* Set up driver's info for lower half */ + iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband, + eeprom_ch_array[ch_idx], + &eeprom_ch_info[ch_idx], + IEEE80211_CHAN_NO_HT40PLUS); + + /* Set up driver's info for upper half */ + iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband, + eeprom_ch_array[ch_idx] + 4, + &eeprom_ch_info[ch_idx], + IEEE80211_CHAN_NO_HT40MINUS); + } + } + + return n_channels; +} + +static int iwl_init_sband_channels(struct iwl_eeprom_data *data, + struct ieee80211_supported_band *sband, + int n_channels, enum ieee80211_band band) +{ + struct ieee80211_channel *chan = &data->channels[0]; + int n = 0, idx = 0; + + while (chan->band != band && idx < n_channels) + chan = &data->channels[++idx]; + + sband->channels = &data->channels[idx]; + + while (chan->band == band && idx < n_channels) { + chan = &data->channels[++idx]; + n++; + } + + sband->n_channels = n; + + return n; +} + +#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ +#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ + +static void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg, + struct iwl_eeprom_data *data, + struct ieee80211_sta_ht_cap *ht_info, + enum ieee80211_band band) +{ + int max_bit_rate = 0; + u8 rx_chains; + u8 tx_chains; + + tx_chains = hweight8(data->valid_tx_ant); + if (cfg->rx_with_siso_diversity) + rx_chains = 1; + else + rx_chains = hweight8(data->valid_rx_ant); + + if (!(data->sku & EEPROM_SKU_CAP_11N_ENABLE) || !cfg->ht_params) { + ht_info->ht_supported = false; + return; + } + + ht_info->ht_supported = true; + ht_info->cap = 0; + + if (iwlwifi_mod_params.amsdu_size_8K) + ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; + + ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_4; + + ht_info->mcs.rx_mask[0] = 0xFF; + if (rx_chains >= 2) + ht_info->mcs.rx_mask[1] = 0xFF; + if (rx_chains >= 3) + ht_info->mcs.rx_mask[2] = 0xFF; + + if (cfg->ht_params->ht_greenfield_support) + ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; + ht_info->cap |= IEEE80211_HT_CAP_SGI_20; + + max_bit_rate = MAX_BIT_RATE_20_MHZ; + + if (cfg->ht_params->ht40_bands & BIT(band)) { + ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + ht_info->cap |= IEEE80211_HT_CAP_SGI_40; + ht_info->mcs.rx_mask[4] = 0x01; + max_bit_rate = MAX_BIT_RATE_40_MHZ; + } + + /* Highest supported Rx data rate */ + max_bit_rate *= rx_chains; + WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK); + ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate); + + /* Tx MCS capabilities */ + ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + if (tx_chains != rx_chains) { + ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; + ht_info->mcs.tx_params |= ((tx_chains - 1) << + IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); + } +} + +static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg, + struct iwl_eeprom_data *data, + const u8 *eeprom, size_t eeprom_size) +{ + int n_channels = iwl_init_channel_map(dev, cfg, data, + eeprom, eeprom_size); + int n_used = 0; + struct ieee80211_supported_band *sband; + + sband = &data->bands[IEEE80211_BAND_2GHZ]; + sband->band = IEEE80211_BAND_2GHZ; + sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS]; + sband->n_bitrates = N_RATES_24; + n_used += iwl_init_sband_channels(data, sband, n_channels, + IEEE80211_BAND_2GHZ); + iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_2GHZ); + + sband = &data->bands[IEEE80211_BAND_5GHZ]; + sband->band = IEEE80211_BAND_5GHZ; + sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS]; + sband->n_bitrates = N_RATES_52; + n_used += iwl_init_sband_channels(data, sband, n_channels, + IEEE80211_BAND_5GHZ); + iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_5GHZ); + + if (n_channels != n_used) + IWL_ERR_DEV(dev, "EEPROM: used only %d of %d channels\n", + n_used, n_channels); +} + +/* EEPROM data functions */ + +struct iwl_eeprom_data * +iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg, + const u8 *eeprom, size_t eeprom_size) +{ + struct iwl_eeprom_data *data; + const void *tmp; + + if (WARN_ON(!cfg || !cfg->eeprom_params)) + return NULL; + + data = kzalloc(sizeof(*data) + + sizeof(struct ieee80211_channel) * IWL_NUM_CHANNELS, + GFP_KERNEL); + if (!data) + return NULL; + + /* get MAC address(es) */ + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_MAC_ADDRESS); + if (!tmp) + goto err_free; + memcpy(data->hw_addr, tmp, ETH_ALEN); + data->n_hw_addrs = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_NUM_MAC_ADDRESS); + + if (iwl_eeprom_read_calib(eeprom, eeprom_size, data)) + goto err_free; + + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_XTAL); + if (!tmp) + goto err_free; + memcpy(data->xtal_calib, tmp, sizeof(data->xtal_calib)); + + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_RAW_TEMPERATURE); + if (!tmp) + goto err_free; + data->raw_temperature = *(__le16 *)tmp; + + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_KELVIN_TEMPERATURE); + if (!tmp) + goto err_free; + data->kelvin_temperature = *(__le16 *)tmp; + data->kelvin_voltage = *((__le16 *)tmp + 1); + + data->radio_cfg = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_RADIO_CONFIG); + data->sku = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_SKU_CAP); + data->eeprom_version = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_VERSION); + + data->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(data->radio_cfg); + data->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(data->radio_cfg); + + /* check overrides (some devices have wrong EEPROM) */ + if (cfg->valid_tx_ant) + data->valid_tx_ant = cfg->valid_tx_ant; + if (cfg->valid_rx_ant) + data->valid_rx_ant = cfg->valid_rx_ant; + + if (!data->valid_tx_ant || !data->valid_rx_ant) { + IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n", + data->valid_tx_ant, data->valid_rx_ant); + goto err_free; + } + + iwl_init_sbands(dev, cfg, data, eeprom, eeprom_size); + + return data; + err_free: + kfree(data); + return NULL; +} +EXPORT_SYMBOL_GPL(iwl_parse_eeprom_data); + +/* helper functions */ +int iwl_eeprom_check_version(struct iwl_eeprom_data *data, + struct iwl_trans *trans) +{ + if (data->eeprom_version >= trans->cfg->eeprom_ver || + data->calib_version >= trans->cfg->eeprom_calib_ver) { + IWL_INFO(trans, "device EEPROM VER=0x%x, CALIB=0x%x\n", + data->eeprom_version, data->calib_version); + return 0; + } + + IWL_ERR(trans, + "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", + data->eeprom_version, trans->cfg->eeprom_ver, + data->calib_version, trans->cfg->eeprom_calib_ver); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(iwl_eeprom_check_version); |
