diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 149 |
1 files changed, 137 insertions, 12 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 5b56307..02bf17e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2,7 +2,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved. + * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -47,6 +47,26 @@ MODULE_VERSION(IWLWIFI_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); MODULE_LICENSE("GPL"); +/* + * set bt_coex_active to true, uCode will do kill/defer + * every time the priority line is asserted (BT is sending signals on the + * priority line in the PCIx). + * set bt_coex_active to false, uCode will ignore the BT activity and + * perform the normal operation + * + * User might experience transmit issue on some platform due to WiFi/BT + * co-exist problem. The possible behaviors are: + * Able to scan and finding all the available AP + * Not able to associate with any AP + * On those platforms, WiFi communication can be restored by set + * "bt_coex_active" module parameter to "false" + * + * default: bt_coex_active = true (BT_COEX_ENABLE) + */ +static bool bt_coex_active = true; +module_param(bt_coex_active, bool, S_IRUGO); +MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist\n"); + static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = { {COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP, 0, COEX_UNASSOC_IDLE_FLAGS}, @@ -257,8 +277,8 @@ int iwl_hw_nic_init(struct iwl_priv *priv) spin_lock_irqsave(&priv->lock, flags); priv->cfg->ops->lib->apm_ops.init(priv); - /* Set interrupt coalescing timer to 512 usecs */ - iwl_write8(priv, CSR_INT_COALESCING, 512 / 32); + /* Set interrupt coalescing calibration timer to default (512 usecs) */ + iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); spin_unlock_irqrestore(&priv->lock, flags); @@ -1353,6 +1373,8 @@ void iwl_irq_handle_error(struct iwl_priv *priv) priv->cfg->ops->lib->dump_nic_error_log(priv); if (priv->cfg->ops->lib->dump_csr) priv->cfg->ops->lib->dump_csr(priv); + if (priv->cfg->ops->lib->dump_fh) + priv->cfg->ops->lib->dump_fh(priv, NULL, false); priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false); #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) @@ -1803,6 +1825,16 @@ irqreturn_t iwl_isr_ict(int irq, void *data) if (val == 0xffffffff) val = 0; + /* + * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit + * (bit 15 before shifting it to 31) to clear when using interrupt + * coalescing. fortunately, bits 18 and 19 stay set when this happens + * so we use them to decide on the real state of the Rx bit. + * In order words, bit 15 is set if bit 18 or bit 19 are set. + */ + if (val & 0xC0000) + val |= 0x8000; + inta = (0xff & val) | ((0xff00 & val) << 16); IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n", inta, inta_mask, val); @@ -1965,13 +1997,20 @@ EXPORT_SYMBOL(iwl_isr_legacy); int iwl_send_bt_config(struct iwl_priv *priv) { struct iwl_bt_cmd bt_cmd = { - .flags = BT_COEX_MODE_4W, .lead_time = BT_LEAD_TIME_DEF, .max_kill = BT_MAX_KILL_DEF, .kill_ack_mask = 0, .kill_cts_mask = 0, }; + if (!bt_coex_active) + bt_cmd.flags = BT_COEX_DISABLE; + else + bt_cmd.flags = BT_COEX_ENABLE; + + IWL_DEBUG_INFO(priv, "BT coex %s\n", + (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active"); + return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(struct iwl_bt_cmd), &bt_cmd); } @@ -2592,23 +2631,21 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct iwl_priv *priv = hw->priv; - unsigned long flags; + int err = 0; IWL_DEBUG_MAC80211(priv, "enter: type %d\n", vif->type); + mutex_lock(&priv->mutex); + if (priv->vif) { IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n"); - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + goto out; } - spin_lock_irqsave(&priv->lock, flags); priv->vif = vif; priv->iw_mode = vif->type; - spin_unlock_irqrestore(&priv->lock, flags); - - mutex_lock(&priv->mutex); - if (vif->addr) { IWL_DEBUG_MAC80211(priv, "Set %pM\n", vif->addr); memcpy(priv->mac_addr, vif->addr, ETH_ALEN); @@ -2618,10 +2655,11 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, /* we are not ready, will run again when ready */ set_bit(STATUS_MODE_PENDING, &priv->status); + out: mutex_unlock(&priv->mutex); IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; + return err; } EXPORT_SYMBOL(iwl_mac_add_interface); @@ -3268,6 +3306,93 @@ void iwl_dump_csr(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_dump_csr); +const static char *get_fh_string(int cmd) +{ + switch (cmd) { + IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); + IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); + IWL_CMD(FH_RSCSR_CHNL0_WPTR); + IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); + IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); + IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG); + IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); + IWL_CMD(FH_TSSR_TX_STATUS_REG); + IWL_CMD(FH_TSSR_TX_ERROR_REG); + default: + return "UNKNOWN"; + + } +} + +int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display) +{ + int i; +#ifdef CONFIG_IWLWIFI_DEBUG + int pos = 0; + size_t bufsz = 0; +#endif + u32 fh_tbl[] = { + FH_RSCSR_CHNL0_STTS_WPTR_REG, + FH_RSCSR_CHNL0_RBDCB_BASE_REG, + FH_RSCSR_CHNL0_WPTR, + FH_MEM_RCSR_CHNL0_CONFIG_REG, + FH_MEM_RSSR_SHARED_CTRL_REG, + FH_MEM_RSSR_RX_STATUS_REG, + FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, + FH_TSSR_TX_STATUS_REG, + FH_TSSR_TX_ERROR_REG + }; +#ifdef CONFIG_IWLWIFI_DEBUG + if (display) { + bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); + if (!*buf) + return -ENOMEM; + pos += scnprintf(*buf + pos, bufsz - pos, + "FH register values:\n"); + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + pos += scnprintf(*buf + pos, bufsz - pos, + " %34s: 0X%08x\n", + get_fh_string(fh_tbl[i]), + iwl_read_direct32(priv, fh_tbl[i])); + } + return pos; + } +#endif + IWL_ERR(priv, "FH register values:\n"); + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + IWL_ERR(priv, " %34s: 0X%08x\n", + get_fh_string(fh_tbl[i]), + iwl_read_direct32(priv, fh_tbl[i])); + } + return 0; +} +EXPORT_SYMBOL(iwl_dump_fh); + +void iwl_force_rf_reset(struct iwl_priv *priv) +{ + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return; + + if (!iwl_is_associated(priv)) { + IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n"); + return; + } + /* + * There is no easy and better way to force reset the radio, + * the only known method is switching channel which will force to + * reset and tune the radio. + * Use internal short scan (single channel) operation to should + * achieve this objective. + * Driver should reset the radio when number of consecutive missed + * beacon, or any other uCode error condition detected. + */ + IWL_DEBUG_INFO(priv, "perform radio reset.\n"); + iwl_internal_short_hw_scan(priv); + return; +} +EXPORT_SYMBOL(iwl_force_rf_reset); + #ifdef CONFIG_PM int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) |