summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-agn.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-agn.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c110
1 files changed, 21 insertions, 89 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 8025c62..f189bbe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -86,7 +86,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
-MODULE_ALIAS("iwl4965");
static int iwlagn_ant_coupling;
static bool iwlagn_bt_ch_announce = 1;
@@ -466,6 +465,15 @@ static void iwl_rx_reply_alive(struct iwl_priv *priv,
IWL_WARN(priv, "%s uCode did not respond OK.\n",
(palive->ver_subtype == INITIALIZE_SUBTYPE) ?
"init" : "runtime");
+ /*
+ * If fail to load init uCode,
+ * let's try to load the init uCode again.
+ * We should not get into this situation, but if it
+ * does happen, we should not move on and loading "runtime"
+ * without proper calibrate the device.
+ */
+ if (palive->ver_subtype == INITIALIZE_SUBTYPE)
+ priv->ucode_type = UCODE_NONE;
queue_work(priv->workqueue, &priv->restart);
}
}
@@ -1405,72 +1413,6 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
iwl_enable_rfkill_int(priv);
}
-/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
-#define ACK_CNT_RATIO (50)
-#define BA_TIMEOUT_CNT (5)
-#define BA_TIMEOUT_MAX (16)
-
-/**
- * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
- *
- * When the ACK count ratio is low and aggregated BA timeout retries exceeding
- * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
- * operation state.
- */
-bool iwl_good_ack_health(struct iwl_priv *priv, struct iwl_rx_packet *pkt)
-{
- int actual_delta, expected_delta, ba_timeout_delta;
- struct statistics_tx *cur, *old;
-
- if (priv->_agn.agg_tids_count)
- return true;
-
- if (iwl_bt_statistics(priv)) {
- cur = &pkt->u.stats_bt.tx;
- old = &priv->_agn.statistics_bt.tx;
- } else {
- cur = &pkt->u.stats.tx;
- old = &priv->_agn.statistics.tx;
- }
-
- actual_delta = le32_to_cpu(cur->actual_ack_cnt) -
- le32_to_cpu(old->actual_ack_cnt);
- expected_delta = le32_to_cpu(cur->expected_ack_cnt) -
- le32_to_cpu(old->expected_ack_cnt);
-
- /* Values should not be negative, but we do not trust the firmware */
- if (actual_delta <= 0 || expected_delta <= 0)
- return true;
-
- ba_timeout_delta = le32_to_cpu(cur->agg.ba_timeout) -
- le32_to_cpu(old->agg.ba_timeout);
-
- if ((actual_delta * 100 / expected_delta) < ACK_CNT_RATIO &&
- ba_timeout_delta > BA_TIMEOUT_CNT) {
- IWL_DEBUG_RADIO(priv, "deltas: actual %d expected %d ba_timeout %d\n",
- actual_delta, expected_delta, ba_timeout_delta);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- /*
- * This is ifdef'ed on DEBUGFS because otherwise the
- * statistics aren't available. If DEBUGFS is set but
- * DEBUG is not, these will just compile out.
- */
- IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta %d\n",
- priv->_agn.delta_statistics.tx.rx_detected_cnt);
- IWL_DEBUG_RADIO(priv,
- "ack_or_ba_timeout_collision delta %d\n",
- priv->_agn.delta_statistics.tx.ack_or_ba_timeout_collision);
-#endif
-
- if (ba_timeout_delta >= BA_TIMEOUT_MAX)
- return false;
- }
-
- return true;
-}
-
-
/*****************************************************************************
*
* sysfs attributes
@@ -2735,9 +2677,11 @@ static void iwl_alive_start(struct iwl_priv *priv)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
}
- if (priv->cfg->bt_params &&
- !priv->cfg->bt_params->advanced_bt_coexist) {
- /* Configure Bluetooth device coexistence support */
+ if (!priv->cfg->bt_params || (priv->cfg->bt_params &&
+ !priv->cfg->bt_params->advanced_bt_coexist)) {
+ /*
+ * default is 2-wire BT coexexistence support
+ */
priv->cfg->ops->hcmd->send_bt_config(priv);
}
@@ -3320,7 +3264,7 @@ void iwlagn_mac_stop(struct ieee80211_hw *hw)
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
@@ -3333,7 +3277,6 @@ int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
dev_kfree_skb_any(skb);
IWL_DEBUG_MACDUMP(priv, "leave\n");
- return NETDEV_TX_OK;
}
void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
@@ -3799,7 +3742,6 @@ static void iwlagn_bg_roc_done(struct work_struct *work)
mutex_unlock(&priv->mutex);
}
-#ifdef CONFIG_IWL5000
static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
struct ieee80211_channel *channel,
enum nl80211_channel_type channel_type,
@@ -3855,7 +3797,6 @@ static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
return 0;
}
-#endif
/*****************************************************************************
*
@@ -4025,7 +3966,6 @@ static void iwl_uninit_drv(struct iwl_priv *priv)
kfree(priv->scan_cmd);
}
-#ifdef CONFIG_IWL5000
struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
@@ -4050,7 +3990,6 @@ struct ieee80211_ops iwlagn_hw_ops = {
.remain_on_channel = iwl_mac_remain_on_channel,
.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
};
-#endif
static void iwl_hw_detect(struct iwl_priv *priv)
{
@@ -4118,12 +4057,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (cfg->mod_params->disable_hw_scan) {
dev_printk(KERN_DEBUG, &(pdev->dev),
"sw scan support is deprecated\n");
-#ifdef CONFIG_IWL5000
iwlagn_hw_ops.hw_scan = NULL;
-#endif
-#ifdef CONFIG_IWL4965
- iwl4965_hw_ops.hw_scan = NULL;
-#endif
}
hw = iwl_alloc_all(cfg);
@@ -4502,12 +4436,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
/* Hardware specific file defines the PCI IDs table for that hardware module */
static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
-#ifdef CONFIG_IWL4965
- {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
- {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
-#endif /* CONFIG_IWL4965 */
-#ifdef CONFIG_IWL5000
-/* 5100 Series WiFi */
{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
@@ -4693,8 +4621,6 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
{IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
-#endif /* CONFIG_IWL5000 */
-
{0}
};
MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
@@ -4793,3 +4719,9 @@ MODULE_PARM_DESC(antenna_coupling,
module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO);
MODULE_PARM_DESC(bt_ch_inhibition,
"Disable BT channel inhibition (default: enable)");
+
+module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
+MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
+
+module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
+MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
OpenPOWER on IntegriCloud