diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-4965-hw.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h index f3f41a6..9da7c7b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h @@ -71,7 +71,7 @@ #include "iwl-fh.h" -/* EERPROM */ +/* EEPROM */ #define IWL4965_EEPROM_IMG_SIZE 1024 /* @@ -286,13 +286,13 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * that target txpower. * * - * 3) Determine (EEPROM) calibration subband for the target channel, by - * comparing against first and last channels in each subband + * 3) Determine (EEPROM) calibration sub band for the target channel, by + * comparing against first and last channels in each sub band * (see struct iwl4965_eeprom_calib_subband_info). * * * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, - * referencing the 2 factory-measured (sample) channels within the subband. + * referencing the 2 factory-measured (sample) channels within the sub band. * * Interpolation is based on difference between target channel's frequency * and the sample channels' frequencies. Since channel numbers are based @@ -300,7 +300,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * to interpolating based on channel number differences. * * Note that the sample channels may or may not be the channels at the - * edges of the subband. The target channel may be "outside" of the + * edges of the sub band. The target channel may be "outside" of the * span of the sampled channels. * * Driver may choose the pair (for 2 Tx chains) of measurements (see @@ -344,7 +344,7 @@ static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) * "4965 temperature calculation". * * If current temperature is higher than factory temperature, driver must - * increase gain (lower gain table index), and vice versa. + * increase gain (lower gain table index), and vice verse. * * Temperature affects gain differently for different channels: * |
