diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-3945-commands.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-3945-commands.h | 1728 |
1 files changed, 1728 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h new file mode 100644 index 0000000..46bb2c7 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h @@ -0,0 +1,1728 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * James P. Ketrenos <ipw2100-admin@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +/* + * Please use this file (iwl-3945-commands.h) only for uCode API definitions. + * Please use iwl-3945-hw.h for hardware-related definitions. + * Please use iwl-3945.h for driver implementation definitions. + */ + +#ifndef __iwl_3945_commands_h__ +#define __iwl_3945_commands_h__ + +enum { + REPLY_ALIVE = 0x1, + REPLY_ERROR = 0x2, + + /* RXON and QOS commands */ + REPLY_RXON = 0x10, + REPLY_RXON_ASSOC = 0x11, + REPLY_QOS_PARAM = 0x13, + REPLY_RXON_TIMING = 0x14, + + /* Multi-Station support */ + REPLY_ADD_STA = 0x18, + REPLY_REMOVE_STA = 0x19, /* not used */ + REPLY_REMOVE_ALL_STA = 0x1a, /* not used */ + + /* RX, TX, LEDs */ + REPLY_3945_RX = 0x1b, /* 3945 only */ + REPLY_TX = 0x1c, + REPLY_RATE_SCALE = 0x47, /* 3945 only */ + REPLY_LEDS_CMD = 0x48, + REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */ + + /* 802.11h related */ + RADAR_NOTIFICATION = 0x70, /* not used */ + REPLY_QUIET_CMD = 0x71, /* not used */ + REPLY_CHANNEL_SWITCH = 0x72, + CHANNEL_SWITCH_NOTIFICATION = 0x73, + REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74, + SPECTRUM_MEASURE_NOTIFICATION = 0x75, + + /* Power Management */ + POWER_TABLE_CMD = 0x77, + PM_SLEEP_NOTIFICATION = 0x7A, + PM_DEBUG_STATISTIC_NOTIFIC = 0x7B, + + /* Scan commands and notifications */ + REPLY_SCAN_CMD = 0x80, + REPLY_SCAN_ABORT_CMD = 0x81, + SCAN_START_NOTIFICATION = 0x82, + SCAN_RESULTS_NOTIFICATION = 0x83, + SCAN_COMPLETE_NOTIFICATION = 0x84, + + /* IBSS/AP commands */ + BEACON_NOTIFICATION = 0x90, + REPLY_TX_BEACON = 0x91, + WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */ + + /* Miscellaneous commands */ + QUIET_NOTIFICATION = 0x96, /* not used */ + REPLY_TX_PWR_TABLE_CMD = 0x97, + MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ + + /* Bluetooth device coexistance config command */ + REPLY_BT_CONFIG = 0x9b, + + /* Statistics */ + REPLY_STATISTICS_CMD = 0x9c, + STATISTICS_NOTIFICATION = 0x9d, + + /* RF-KILL commands and notifications */ + REPLY_CARD_STATE_CMD = 0xa0, + CARD_STATE_NOTIFICATION = 0xa1, + + /* Missed beacons notification */ + MISSED_BEACONS_NOTIFICATION = 0xa2, + + REPLY_MAX = 0xff +}; + +/****************************************************************************** + * (0) + * Commonly used structures and definitions: + * Command header, txpower + * + *****************************************************************************/ + +/* iwl3945_cmd_header flags value */ +#define IWL_CMD_FAILED_MSK 0x40 + +/** + * struct iwl3945_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ +struct iwl3945_cmd_header { + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 flags; /* IWL_CMD_* */ + /* + * The driver sets up the sequence number to values of its chosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. + * + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_3945_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. + * + * The Linux driver uses the following format: + * + * 0:7 index/position within Tx queue + * 8:13 Tx queue selection + * 14:14 driver sets this to indicate command is in the 'huge' + * storage at the end of the command buffers, i.e. scan cmd + * 15:15 uCode sets this in uCode-originated response/notification + */ + __le16 sequence; + + /* command or response/notification data follows immediately */ + u8 data[0]; +} __attribute__ ((packed)); + +/** + * struct iwl3945_tx_power + * + * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH + * + * Each entry contains two values: + * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained + * linear value that multiplies the output of the digital signal processor, + * before being sent to the analog radio. + * 2) Radio gain. This sets the analog gain of the radio Tx path. + * It is a coarser setting, and behaves in a logarithmic (dB) fashion. + * + * Driver obtains values from struct iwl3945_tx_power power_gain_table[][]. + */ +struct iwl3945_tx_power { + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ +} __attribute__ ((packed)); + +/** + * struct iwl3945_power_per_rate + * + * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH + */ +struct iwl3945_power_per_rate { + u8 rate; /* plcp */ + struct iwl3945_tx_power tpc; + u8 reserved; +} __attribute__ ((packed)); + +/****************************************************************************** + * (0a) + * Alive and Error Commands & Responses: + * + *****************************************************************************/ + +#define UCODE_VALID_OK __constant_cpu_to_le32(0x1) +#define INITIALIZE_SUBTYPE (9) + +/* + * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "initialize alive" notification once the initialization + * uCode image has completed its work, and is ready to load the runtime image. + * This is the *first* "alive" notification that the driver will receive after + * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. + * + * See comments documenting "BSM" (bootstrap state machine). + */ +struct iwl3945_init_alive_resp { + u8 ucode_minor; + u8 ucode_major; + __le16 reserved1; + u8 sw_rev[8]; + u8 ver_type; + u8 ver_subtype; /* "9" for initialize alive */ + __le16 reserved2; + __le32 log_event_table_ptr; + __le32 error_event_table_ptr; + __le32 timestamp; + __le32 is_valid; +} __attribute__ ((packed)); + + +/** + * REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "alive" notification once the runtime image is ready + * to receive commands from the driver. This is the *second* "alive" + * notification that the driver will receive after rebooting uCode; + * this "alive" is indicated by subtype field != 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * This response includes two pointers to structures within the device's + * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: + * + * 1) log_event_table_ptr indicates base of the event log. This traces + * a 256-entry history of uCode execution within a circular buffer. + * + * 2) error_event_table_ptr indicates base of the error log. This contains + * information about any uCode error that occurs. + * + * The Linux driver can print both logs to the system log when a uCode error + * occurs. + */ +struct iwl3945_alive_resp { + u8 ucode_minor; + u8 ucode_major; + __le16 reserved1; + u8 sw_rev[8]; + u8 ver_type; + u8 ver_subtype; /* not "9" for runtime alive */ + __le16 reserved2; + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 error_event_table_ptr; /* SRAM address for error log */ + __le32 timestamp; + __le32 is_valid; +} __attribute__ ((packed)); + +union tsf { + u8 byte[8]; + __le16 word[4]; + __le32 dw[2]; +}; + +/* + * REPLY_ERROR = 0x2 (response only, not a command) + */ +struct iwl3945_error_resp { + __le32 error_type; + u8 cmd_id; + u8 reserved1; + __le16 bad_cmd_seq_num; + __le16 reserved2; + __le32 error_info; + union tsf timestamp; +} __attribute__ ((packed)); + +/****************************************************************************** + * (1) + * RXON Commands & Responses: + * + *****************************************************************************/ + +/* + * Rx config defines & structure + */ +/* rx_config device types */ +enum { + RXON_DEV_TYPE_AP = 1, + RXON_DEV_TYPE_ESS = 3, + RXON_DEV_TYPE_IBSS = 4, + RXON_DEV_TYPE_SNIFFER = 6, +}; + +/* rx_config flags */ +/* band & modulation selection */ +#define RXON_FLG_BAND_24G_MSK __constant_cpu_to_le32(1 << 0) +#define RXON_FLG_CCK_MSK __constant_cpu_to_le32(1 << 1) +/* auto detection enable */ +#define RXON_FLG_AUTO_DETECT_MSK __constant_cpu_to_le32(1 << 2) +/* TGg protection when tx */ +#define RXON_FLG_TGG_PROTECT_MSK __constant_cpu_to_le32(1 << 3) +/* cck short slot & preamble */ +#define RXON_FLG_SHORT_SLOT_MSK __constant_cpu_to_le32(1 << 4) +#define RXON_FLG_SHORT_PREAMBLE_MSK __constant_cpu_to_le32(1 << 5) +/* antenna selection */ +#define RXON_FLG_DIS_DIV_MSK __constant_cpu_to_le32(1 << 7) +#define RXON_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0x0f00) +#define RXON_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8) +#define RXON_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9) +/* radar detection enable */ +#define RXON_FLG_RADAR_DETECT_MSK __constant_cpu_to_le32(1 << 12) +#define RXON_FLG_TGJ_NARROW_BAND_MSK __constant_cpu_to_le32(1 << 13) +/* rx response to host with 8-byte TSF +* (according to ON_AIR deassertion) */ +#define RXON_FLG_TSF2HOST_MSK __constant_cpu_to_le32(1 << 15) + +/* rx_config filter flags */ +/* accept all data frames */ +#define RXON_FILTER_PROMISC_MSK __constant_cpu_to_le32(1 << 0) +/* pass control & management to host */ +#define RXON_FILTER_CTL2HOST_MSK __constant_cpu_to_le32(1 << 1) +/* accept multi-cast */ +#define RXON_FILTER_ACCEPT_GRP_MSK __constant_cpu_to_le32(1 << 2) +/* don't decrypt uni-cast frames */ +#define RXON_FILTER_DIS_DECRYPT_MSK __constant_cpu_to_le32(1 << 3) +/* don't decrypt multi-cast frames */ +#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4) +/* STA is associated */ +#define RXON_FILTER_ASSOC_MSK __constant_cpu_to_le32(1 << 5) +/* transfer to host non bssid beacons in associated state */ +#define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6) + +/** + * REPLY_RXON = 0x10 (command, has simple generic response) + * + * RXON tunes the radio tuner to a service channel, and sets up a number + * of parameters that are used primarily for Rx, but also for Tx operations. + * + * NOTE: When tuning to a new channel, driver must set the + * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent + * info within the device, including the station tables, tx retry + * rate tables, and txpower tables. Driver must build a new station + * table and txpower table before transmitting anything on the RXON + * channel. + * + * NOTE: All RXONs wipe clean the internal txpower table. Driver must + * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), + * regardless of whether RXON_FILTER_ASSOC_MSK is set. + */ +struct iwl3945_rxon_cmd { + u8 node_addr[6]; + __le16 reserved1; + u8 bssid_addr[6]; + __le16 reserved2; + u8 wlap_bssid_addr[6]; + __le16 reserved3; + u8 dev_type; + u8 air_propagation; + __le16 reserved4; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 assoc_id; + __le32 flags; + __le32 filter_flags; + __le16 channel; + __le16 reserved5; +} __attribute__ ((packed)); + +/* + * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response) + */ +struct iwl3945_rxon_assoc_cmd { + __le32 flags; + __le32 filter_flags; + u8 ofdm_basic_rates; + u8 cck_basic_rates; + __le16 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) + */ +struct iwl3945_rxon_time_cmd { + union tsf timestamp; + __le16 beacon_interval; + __le16 atim_window; + __le32 beacon_init_val; + __le16 listen_interval; + __le16 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) + */ +struct iwl3945_channel_switch_cmd { + u8 band; + u8 expect_beacon; + __le16 channel; + __le32 rxon_flags; + __le32 rxon_filter_flags; + __le32 switch_time; + struct iwl3945_power_per_rate power[IWL_MAX_RATES]; +} __attribute__ ((packed)); + +/* + * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command) + */ +struct iwl3945_csa_notification { + __le16 band; + __le16 channel; + __le32 status; /* 0 - OK, 1 - fail */ +} __attribute__ ((packed)); + +/****************************************************************************** + * (2) + * Quality-of-Service (QOS) Commands & Responses: + * + *****************************************************************************/ + +/** + * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM + * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd + * + * @cw_min: Contention window, start value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x0f. + * @cw_max: Contention window, max value in numbers of slots. + * Should be a power-of-2, minus 1. Device's default is 0x3f. + * @aifsn: Number of slots in Arbitration Interframe Space (before + * performing random backoff timing prior to Tx). Device default 1. + * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. + * + * Device will automatically increase contention window by (2*CW) + 1 for each + * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW + * value, to cap the CW value. + */ +struct iwl3945_ac_qos { + __le16 cw_min; + __le16 cw_max; + u8 aifsn; + u8 reserved1; + __le16 edca_txop; +} __attribute__ ((packed)); + +/* QoS flags defines */ +#define QOS_PARAM_FLG_UPDATE_EDCA_MSK __constant_cpu_to_le32(0x01) +#define QOS_PARAM_FLG_TGN_MSK __constant_cpu_to_le32(0x02) +#define QOS_PARAM_FLG_TXOP_TYPE_MSK __constant_cpu_to_le32(0x10) + +/* Number of Access Categories (AC) (EDCA), queues 0..3 */ +#define AC_NUM 4 + +/* + * REPLY_QOS_PARAM = 0x13 (command, has simple generic response) + * + * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs + * 0: Background, 1: Best Effort, 2: Video, 3: Voice. + */ +struct iwl3945_qosparam_cmd { + __le32 qos_flags; + struct iwl3945_ac_qos ac[AC_NUM]; +} __attribute__ ((packed)); + +/****************************************************************************** + * (3) + * Add/Modify Stations Commands & Responses: + * + *****************************************************************************/ +/* + * Multi station support + */ + +/* Special, dedicated locations within device's station table */ +#define IWL_AP_ID 0 +#define IWL_MULTICAST_ID 1 +#define IWL_STA_ID 2 +#define IWL3945_BROADCAST_ID 24 +#define IWL3945_STATION_COUNT 25 + +#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/ +#define IWL_INVALID_STATION 255 + +#define STA_FLG_TX_RATE_MSK __constant_cpu_to_le32(1 << 2); +#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1 << 8); + +/* Use in mode field. 1: modify existing entry, 0: add new station entry */ +#define STA_CONTROL_MODIFY_MSK 0x01 + +/* key flags __le16*/ +#define STA_KEY_FLG_ENCRYPT_MSK __constant_cpu_to_le16(0x7) +#define STA_KEY_FLG_NO_ENC __constant_cpu_to_le16(0x0) +#define STA_KEY_FLG_WEP __constant_cpu_to_le16(0x1) +#define STA_KEY_FLG_CCMP __constant_cpu_to_le16(0x2) +#define STA_KEY_FLG_TKIP __constant_cpu_to_le16(0x3) + +#define STA_KEY_FLG_KEYID_POS 8 +#define STA_KEY_FLG_INVALID __constant_cpu_to_le16(0x0800) + +/* Flags indicate whether to modify vs. don't change various station params */ +#define STA_MODIFY_KEY_MASK 0x01 +#define STA_MODIFY_TID_DISABLE_TX 0x02 +#define STA_MODIFY_TX_RATE_MSK 0x04 + +/* + * Antenna masks: + * bit14:15 01 B inactive, A active + * 10 B active, A inactive + * 11 Both active + */ +#define RATE_MCS_ANT_A_POS 14 +#define RATE_MCS_ANT_B_POS 15 +#define RATE_MCS_ANT_A_MSK 0x4000 +#define RATE_MCS_ANT_B_MSK 0x8000 +#define RATE_MCS_ANT_AB_MSK 0xc000 + +struct iwl3945_keyinfo { + __le16 key_flags; + u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ + u8 reserved1; + __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ + __le16 reserved2; + u8 key[16]; /* 16-byte unicast decryption key */ +} __attribute__ ((packed)); + +/** + * struct sta_id_modify + * @addr[ETH_ALEN]: station's MAC address + * @sta_id: index of station in uCode's station table + * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change + * + * Driver selects unused table index when adding new station, + * or the index to a pre-existing station entry when modifying that station. + * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP). + * + * modify_mask flags select which parameters to modify vs. leave alone. + */ +struct sta_id_modify { + u8 addr[ETH_ALEN]; + __le16 reserved1; + u8 sta_id; + u8 modify_mask; + __le16 reserved2; +} __attribute__ ((packed)); + +/* + * REPLY_ADD_STA = 0x18 (command) + * + * The device contains an internal table of per-station information, + * with info on security keys, aggregation parameters, and Tx rates for + * initial Tx attempt and any retries (4965 uses REPLY_TX_LINK_QUALITY_CMD, + * 3945 uses REPLY_RATE_SCALE to set up rate tables). + * + * REPLY_ADD_STA sets up the table entry for one station, either creating + * a new entry, or modifying a pre-existing one. + * + * NOTE: RXON command (without "associated" bit set) wipes the station table + * clean. Moving into RF_KILL state does this also. Driver must set up + * new station table before transmitting anything on the RXON channel + * (except active scans or active measurements; those commands carry + * their own txpower/rate setup data). + * + * When getting started on a new channel, driver must set up the + * IWL_BROADCAST_ID entry (last entry in the table). For a client + * station in a BSS, once an AP is selected, driver sets up the AP STA + * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP + * are all that are needed for a BSS client station. If the device is + * used as AP, or in an IBSS network, driver must set up station table + * entries for all STAs in network, starting with index IWL_STA_ID. + */ +struct iwl3945_addsta_cmd { + u8 mode; /* 1: modify existing, 0: add new station */ + u8 reserved[3]; + struct sta_id_modify sta; + struct iwl3945_keyinfo key; + __le32 station_flags; /* STA_FLG_* */ + __le32 station_flags_msk; /* STA_FLG_* */ + + /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) + * corresponding to bit (e.g. bit 5 controls TID 5). + * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ + __le16 tid_disable_tx; + + __le16 rate_n_flags; + + /* TID for which to add block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + u8 add_immediate_ba_tid; + + /* TID for which to remove block-ack support. + * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ + u8 remove_immediate_ba_tid; + + /* Starting Sequence Number for added block-ack support. + * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ + __le16 add_immediate_ba_ssn; +} __attribute__ ((packed)); + +#define ADD_STA_SUCCESS_MSK 0x1 +#define ADD_STA_NO_ROOM_IN_TABLE 0x2 +#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 +/* + * REPLY_ADD_STA = 0x18 (response) + */ +struct iwl3945_add_sta_resp { + u8 status; /* ADD_STA_* */ +} __attribute__ ((packed)); + + +/****************************************************************************** + * (4) + * Rx Responses: + * + *****************************************************************************/ + +struct iwl3945_rx_frame_stats { + u8 phy_count; + u8 id; + u8 rssi; + u8 agc; + __le16 sig_avg; + __le16 noise_diff; + u8 payload[0]; +} __attribute__ ((packed)); + +struct iwl3945_rx_frame_hdr { + __le16 channel; + __le16 phy_flags; + u8 reserved1; + u8 rate; + __le16 len; + u8 payload[0]; +} __attribute__ ((packed)); + +#define RX_RES_STATUS_NO_CRC32_ERROR __constant_cpu_to_le32(1 << 0) +#define RX_RES_STATUS_NO_RXE_OVERFLOW __constant_cpu_to_le32(1 << 1) + +#define RX_RES_PHY_FLAGS_BAND_24_MSK __constant_cpu_to_le16(1 << 0) +#define RX_RES_PHY_FLAGS_MOD_CCK_MSK __constant_cpu_to_le16(1 << 1) +#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK __constant_cpu_to_le16(1 << 2) +#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK __constant_cpu_to_le16(1 << 3) +#define RX_RES_PHY_FLAGS_ANTENNA_MSK __constant_cpu_to_le16(0xf0) + +#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) +#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) +#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) +#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) +#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) + +#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) +#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) +#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) +#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) +#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) + +struct iwl3945_rx_frame_end { + __le32 status; + __le64 timestamp; + __le32 beacon_timestamp; +} __attribute__ ((packed)); + +/* + * REPLY_3945_RX = 0x1b (response only, not a command) + * + * NOTE: DO NOT dereference from casts to this structure + * It is provided only for calculating minimum data set size. + * The actual offsets of the hdr and end are dynamic based on + * stats.phy_count + */ +struct iwl3945_rx_frame { + struct iwl3945_rx_frame_stats stats; + struct iwl3945_rx_frame_hdr hdr; + struct iwl3945_rx_frame_end end; +} __attribute__ ((packed)); + +/* Fixed (non-configurable) rx data from phy */ +#define RX_PHY_FLAGS_ANTENNAE_OFFSET (4) +#define RX_PHY_FLAGS_ANTENNAE_MASK (0x70) +#define IWL_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ +#define IWL_AGC_DB_POS (7) +struct iwl4965_rx_non_cfg_phy { + __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ + __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ + u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */ + u8 pad[0]; +} __attribute__ ((packed)); + +/* + * REPLY_4965_RX = 0xc3 (response only, not a command) + * Used only for legacy (non 11n) frames. + */ +#define RX_RES_PHY_CNT 14 +struct iwl4965_rx_phy_res { + u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ + u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ + u8 stat_id; /* configurable DSP phy data set ID */ + u8 reserved1; + __le64 timestamp; /* TSF at on air rise */ + __le32 beacon_time_stamp; /* beacon at on-air rise */ + __le16 phy_flags; /* general phy flags: band, modulation, ... */ + __le16 channel; /* channel number */ + __le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */ + __le32 reserved2; + __le32 rate_n_flags; + __le16 byte_count; /* frame's byte-count */ + __le16 reserved3; +} __attribute__ ((packed)); + +struct iwl4965_rx_mpdu_res_start { + __le16 byte_count; + __le16 reserved; +} __attribute__ ((packed)); + + +/****************************************************************************** + * (5) + * Tx Commands & Responses: + * + * Driver must place each REPLY_TX command into one of the prioritized Tx + * queues in host DRAM, shared between driver and device. When the device's + * Tx scheduler and uCode are preparing to transmit, the device pulls the + * Tx command over the PCI bus via one of the device's Tx DMA channels, + * to fill an internal FIFO from which data will be transmitted. + * + * uCode handles all timing and protocol related to control frames + * (RTS/CTS/ACK), based on flags in the Tx command. + * + * uCode handles retrying Tx when an ACK is expected but not received. + * This includes trying lower data rates than the one requested in the Tx + * command, as set up by the REPLY_RATE_SCALE (for 3945) or + * REPLY_TX_LINK_QUALITY_CMD (4965). + * + * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD. + * This command must be executed after every RXON command, before Tx can occur. + *****************************************************************************/ + +/* REPLY_TX Tx flags field */ + +/* 1: Use Request-To-Send protocol before this frame. + * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */ +#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1) + +/* 1: Transmit Clear-To-Send to self before this frame. + * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames. + * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */ +#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2) + +/* 1: Expect ACK from receiving station + * 0: Don't expect ACK (MAC header's duration field s/b 0) + * Set this for unicast frames, but not broadcast/multicast. */ +#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3) + +/* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD). + * Tx command's initial_rate_index indicates first rate to try; + * uCode walks through table for additional Tx attempts. + * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. + * This rate will be used for all Tx attempts; it will not be scaled. */ +#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4) + +/* 1: Expect immediate block-ack. + * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ +#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6) + +/* 1: Frame requires full Tx-Op protection. + * Set this if either RTS or CTS Tx Flag gets set. */ +#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7) + +/* Tx antenna selection field; used only for 3945, reserved (0) for 4965. + * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */ +#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00) +#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8) +#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9) + +/* 1: Ignore Bluetooth priority for this frame. + * 0: Delay Tx until Bluetooth device is done (normal usage). */ +#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12) + +/* 1: uCode overrides sequence control field in MAC header. + * 0: Driver provides sequence control field in MAC header. + * Set this for management frames, non-QOS data frames, non-unicast frames, + * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */ +#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13) + +/* 1: This frame is non-last MPDU; more fragments are coming. + * 0: Last fragment, or not using fragmentation. */ +#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14) + +/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. + * 0: No TSF required in outgoing frame. + * Set this for transmitting beacons and probe responses. */ +#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16) + +/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword + * alignment of frame's payload data field. + * 0: No pad + * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 + * field (but not both). Driver must align frame data (i.e. data following + * MAC header) to DWORD boundary. */ +#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20) + +/* HCCA-AP - disable duration overwriting. */ +#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25) + +/* + * TX command security control + */ +#define TX_CMD_SEC_WEP 0x01 +#define TX_CMD_SEC_CCM 0x02 +#define TX_CMD_SEC_TKIP 0x03 +#define TX_CMD_SEC_MSK 0x03 +#define TX_CMD_SEC_SHIFT 6 +#define TX_CMD_SEC_KEY128 0x08 + +/* + * REPLY_TX = 0x1c (command) + */ +struct iwl3945_tx_cmd { + /* + * MPDU byte count: + * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, + * + 8 byte IV for CCM or TKIP (not used for WEP) + * + Data payload + * + 8-byte MIC (not used for CCM/WEP) + * NOTE: Does not include Tx command bytes, post-MAC pad bytes, + * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i + * Range: 14-2342 bytes. + */ + __le16 len; + + /* + * MPDU or MSDU byte count for next frame. + * Used for fragmentation and bursting, but not 11n aggregation. + * Same as "len", but for next frame. Set to 0 if not applicable. + */ + __le16 next_frame_len; + + __le32 tx_flags; /* TX_CMD_FLG_* */ + + u8 rate; + + /* Index of recipient station in uCode's station table */ + u8 sta_id; + u8 tid_tspec; + u8 sec_ctl; + u8 key[16]; + union { + u8 byte[8]; + __le16 word[4]; + __le32 dw[2]; + } tkip_mic; + __le32 next_frame_info; + union { + __le32 life_time; + __le32 attempt; + } stop_time; + u8 supp_rates[2]; + u8 rts_retry_limit; /*byte 50 */ + u8 data_retry_limit; /*byte 51 */ + union { + __le16 pm_frame_timeout; + __le16 attempt_duration; + } timeout; + + /* + * Duration of EDCA burst Tx Opportunity, in 32-usec units. + * Set this if txop time is not specified by HCCA protocol (e.g. by AP). + */ + __le16 driver_txop; + + /* + * MAC header goes here, followed by 2 bytes padding if MAC header + * length is 26 or 30 bytes, followed by payload data + */ + u8 payload[0]; + struct ieee80211_hdr hdr[0]; +} __attribute__ ((packed)); + +/* TX command response is sent after *all* transmission attempts. + * + * NOTES: + * + * TX_STATUS_FAIL_NEXT_FRAG + * + * If the fragment flag in the MAC header for the frame being transmitted + * is set and there is insufficient time to transmit the next frame, the + * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'. + * + * TX_STATUS_FIFO_UNDERRUN + * + * Indicates the host did not provide bytes to the FIFO fast enough while + * a TX was in progress. + * + * TX_STATUS_FAIL_MGMNT_ABORT + * + * This status is only possible if the ABORT ON MGMT RX parameter was + * set to true with the TX command. + * + * If the MSB of the status parameter is set then an abort sequence is + * required. This sequence consists of the host activating the TX Abort + * control line, and then waiting for the TX Abort command response. This + * indicates that a the device is no longer in a transmit state, and that the + * command FIFO has been cleared. The host must then deactivate the TX Abort + * control line. Receiving is still allowed in this case. + */ +enum { + TX_STATUS_SUCCESS = 0x01, + TX_STATUS_DIRECT_DONE = 0x02, + TX_STATUS_FAIL_SHORT_LIMIT = 0x82, + TX_STATUS_FAIL_LONG_LIMIT = 0x83, + TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, + TX_STATUS_FAIL_MGMNT_ABORT = 0x85, + TX_STATUS_FAIL_NEXT_FRAG = 0x86, + TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, + TX_STATUS_FAIL_DEST_PS = 0x88, + TX_STATUS_FAIL_ABORTED = 0x89, + TX_STATUS_FAIL_BT_RETRY = 0x8a, + TX_STATUS_FAIL_STA_INVALID = 0x8b, + TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, + TX_STATUS_FAIL_TID_DISABLE = 0x8d, + TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e, + TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, + TX_STATUS_FAIL_TX_LOCKED = 0x90, + TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, +}; + +#define TX_PACKET_MODE_REGULAR 0x0000 +#define TX_PACKET_MODE_BURST_SEQ 0x0100 +#define TX_PACKET_MODE_BURST_FIRST 0x0200 + +enum { + TX_POWER_PA_NOT_ACTIVE = 0x0, +}; + +enum { + TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ + TX_STATUS_DELAY_MSK = 0x00000040, + TX_STATUS_ABORT_MSK = 0x00000080, + TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ + TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ + TX_RESERVED = 0x00780000, /* bits 19:22 */ + TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ + TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ +}; + +/* + * REPLY_TX = 0x1c (response) + */ +struct iwl3945_tx_resp { + u8 failure_rts; + u8 failure_frame; + u8 bt_kill_count; + u8 rate; + __le32 wireless_media_time; + __le32 status; /* TX status */ +} __attribute__ ((packed)); + +/* + * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response) + */ +struct iwl3945_txpowertable_cmd { + u8 band; /* 0: 5 GHz, 1: 2.4 GHz */ + u8 reserved; + __le16 channel; + struct iwl3945_power_per_rate power[IWL_MAX_RATES]; +} __attribute__ ((packed)); + +struct iwl3945_rate_scaling_info { + __le16 rate_n_flags; + u8 try_cnt; + u8 next_rate_index; +} __attribute__ ((packed)); + +/** + * struct iwl3945_rate_scaling_cmd - Rate Scaling Command & Response + * + * REPLY_RATE_SCALE = 0x47 (command, has simple generic response) + * + * NOTE: The table of rates passed to the uCode via the + * RATE_SCALE command sets up the corresponding order of + * rates used for all related commands, including rate + * masks, etc. + * + * For example, if you set 9MB (PLCP 0x0f) as the first + * rate in the rate table, the bit mask for that rate + * when passed through ofdm_basic_rates on the REPLY_RXON + * command would be bit 0 (1 << 0) + */ +struct iwl3945_rate_scaling_cmd { + u8 table_id; + u8 reserved[3]; + struct iwl3945_rate_scaling_info table[IWL_MAX_RATES]; +} __attribute__ ((packed)); + +/* + * REPLY_BT_CONFIG = 0x9b (command, has simple generic response) + * + * 3945 and 4965 support hardware handshake with Bluetooth device on + * same platform. Bluetooth device alerts wireless device when it will Tx; + * wireless device can delay or kill its own Tx to accomodate. + */ +struct iwl3945_bt_cmd { + u8 flags; + u8 lead_time; + u8 max_kill; + u8 reserved; + __le32 kill_ack_mask; + __le32 kill_cts_mask; +} __attribute__ ((packed)); + +/****************************************************************************** + * (6) + * Spectrum Management (802.11h) Commands, Responses, Notifications: + * + *****************************************************************************/ + +/* + * Spectrum Management + */ +#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ + RXON_FILTER_CTL2HOST_MSK | \ + RXON_FILTER_ACCEPT_GRP_MSK | \ + RXON_FILTER_DIS_DECRYPT_MSK | \ + RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ + RXON_FILTER_ASSOC_MSK | \ + RXON_FILTER_BCON_AWARE_MSK) + +struct iwl3945_measure_channel { + __le32 duration; /* measurement duration in extended beacon + * format */ + u8 channel; /* channel to measure */ + u8 type; /* see enum iwl3945_measure_type */ + __le16 reserved; +} __attribute__ ((packed)); + +/* + * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command) + */ +struct iwl3945_spectrum_cmd { + __le16 len; /* number of bytes starting from token */ + u8 token; /* token id */ + u8 id; /* measurement id -- 0 or 1 */ + u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ + u8 periodic; /* 1 = periodic */ + __le16 path_loss_timeout; + __le32 start_time; /* start time in extended beacon format */ + __le32 reserved2; + __le32 flags; /* rxon flags */ + __le32 filter_flags; /* rxon filter flags */ + __le16 channel_count; /* minimum 1, maximum 10 */ + __le16 reserved3; + struct iwl3945_measure_channel channels[10]; +} __attribute__ ((packed)); + +/* + * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response) + */ +struct iwl3945_spectrum_resp { + u8 token; + u8 id; /* id of the prior command replaced, or 0xff */ + __le16 status; /* 0 - command will be handled + * 1 - cannot handle (conflicts with another + * measurement) */ +} __attribute__ ((packed)); + +enum iwl3945_measurement_state { + IWL_MEASUREMENT_START = 0, + IWL_MEASUREMENT_STOP = 1, +}; + +enum iwl3945_measurement_status { + IWL_MEASUREMENT_OK = 0, + IWL_MEASUREMENT_CONCURRENT = 1, + IWL_MEASUREMENT_CSA_CONFLICT = 2, + IWL_MEASUREMENT_TGH_CONFLICT = 3, + /* 4-5 reserved */ + IWL_MEASUREMENT_STOPPED = 6, + IWL_MEASUREMENT_TIMEOUT = 7, + IWL_MEASUREMENT_PERIODIC_FAILED = 8, +}; + +#define NUM_ELEMENTS_IN_HISTOGRAM 8 + +struct iwl3945_measurement_histogram { + __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ + __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ +} __attribute__ ((packed)); + +/* clear channel availability counters */ +struct iwl3945_measurement_cca_counters { + __le32 ofdm; + __le32 cck; +} __attribute__ ((packed)); + +enum iwl3945_measure_type { + IWL_MEASURE_BASIC = (1 << 0), + IWL_MEASURE_CHANNEL_LOAD = (1 << 1), + IWL_MEASURE_HISTOGRAM_RPI = (1 << 2), + IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3), + IWL_MEASURE_FRAME = (1 << 4), + /* bits 5:6 are reserved */ + IWL_MEASURE_IDLE = (1 << 7), +}; + +/* + * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command) + */ +struct iwl3945_spectrum_notification { + u8 id; /* measurement id -- 0 or 1 */ + u8 token; + u8 channel_index; /* index in measurement channel list */ + u8 state; /* 0 - start, 1 - stop */ + __le32 start_time; /* lower 32-bits of TSF */ + u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ + u8 channel; + u8 type; /* see enum iwl3945_measurement_type */ + u8 reserved1; + /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only + * valid if applicable for measurement type requested. */ + __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ + __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ + __le32 cca_time; /* channel load time in usecs */ + u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - + * unidentified */ + u8 reserved2[3]; + struct iwl3945_measurement_histogram histogram; + __le32 stop_time; /* lower 32-bits of TSF */ + __le32 status; /* see iwl3945_measurement_status */ +} __attribute__ ((packed)); + +/****************************************************************************** + * (7) + * Power Management Commands, Responses, Notifications: + * + *****************************************************************************/ + +/** + * struct iwl3945_powertable_cmd - Power Table Command + * @flags: See below: + * + * POWER_TABLE_CMD = 0x77 (command, has simple generic response) + * + * PM allow: + * bit 0 - '0' Driver not allow power management + * '1' Driver allow PM (use rest of parameters) + * uCode send sleep notifications: + * bit 1 - '0' Don't send sleep notification + * '1' send sleep notification (SEND_PM_NOTIFICATION) + * Sleep over DTIM + * bit 2 - '0' PM have to walk up every DTIM + * '1' PM could sleep over DTIM till listen Interval. + * PCI power managed + * bit 3 - '0' (PCI_LINK_CTRL & 0x1) + * '1' !(PCI_LINK_CTRL & 0x1) + * Force sleep Modes + * bit 31/30- '00' use both mac/xtal sleeps + * '01' force Mac sleep + * '10' force xtal sleep + * '11' Illegal set + * + * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then + * ucode assume sleep over DTIM is allowed and we don't need to wakeup + * for every DTIM. + */ +#define IWL_POWER_VEC_SIZE 5 + +#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le32(1 << 0) +#define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le32(1 << 2) +#define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le32(1 << 3) +struct iwl3945_powertable_cmd { + __le32 flags; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 sleep_interval[IWL_POWER_VEC_SIZE]; +} __attribute__((packed)); + +/* + * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command) + * 3945 and 4965 identical. + */ +struct iwl3945_sleep_notification { + u8 pm_sleep_mode; + u8 pm_wakeup_src; + __le16 reserved; + __le32 sleep_time; + __le32 tsf_low; + __le32 bcon_timer; +} __attribute__ ((packed)); + +/* Sleep states. 3945 and 4965 identical. */ +enum { + IWL_PM_NO_SLEEP = 0, + IWL_PM_SLP_MAC = 1, + IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, + IWL_PM_SLP_FULL_MAC_CARD_STATE = 3, + IWL_PM_SLP_PHY = 4, + IWL_PM_SLP_REPENT = 5, + IWL_PM_WAKEUP_BY_TIMER = 6, + IWL_PM_WAKEUP_BY_DRIVER = 7, + IWL_PM_WAKEUP_BY_RFKILL = 8, + /* 3 reserved */ + IWL_PM_NUM_OF_MODES = 12, +}; + +/* + * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response) + */ +#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */ +#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */ +#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */ +struct iwl3945_card_state_cmd { + __le32 status; /* CARD_STATE_CMD_* request new power state */ +} __attribute__ ((packed)); + +/* + * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command) + */ +struct iwl3945_card_state_notif { + __le32 flags; +} __attribute__ ((packed)); + +#define HW_CARD_DISABLED 0x01 +#define SW_CARD_DISABLED 0x02 +#define RF_CARD_DISABLED 0x04 +#define RXON_CARD_DISABLED 0x10 + +struct iwl3945_ct_kill_config { + __le32 reserved; + __le32 critical_temperature_M; + __le32 critical_temperature_R; +} __attribute__ ((packed)); + +/****************************************************************************** + * (8) + * Scan Commands, Responses, Notifications: + * + *****************************************************************************/ + +/** + * struct iwl3945_scan_channel - entry in REPLY_SCAN_CMD channel table + * + * One for each channel in the scan list. + * Each channel can independently select: + * 1) SSID for directed active scans + * 2) Txpower setting (for rate specified within Tx command) + * 3) How long to stay on-channel (behavior may be modified by quiet_time, + * quiet_plcp_th, good_CRC_th) + * + * To avoid uCode errors, make sure the following are true (see comments + * under struct iwl3945_scan_cmd about max_out_time and quiet_time): + * 1) If using passive_dwell (i.e. passive_dwell != 0): + * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) + * 2) quiet_time <= active_dwell + * 3) If restricting off-channel time (i.e. max_out_time !=0): + * passive_dwell < max_out_time + * active_dwell < max_out_time + */ +struct iwl3945_scan_channel { + /* + * type is defined as: + * 0:0 1 = active, 0 = passive + * 1:4 SSID direct bit map; if a bit is set, then corresponding + * SSID IE is transmitted in probe request. + * 5:7 reserved + */ + u8 type; + u8 channel; /* band is selected by iwl3945_scan_cmd "flags" field */ + struct iwl3945_tx_power tpc; + __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ + __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ +} __attribute__ ((packed)); + +/** + * struct iwl3945_ssid_ie - directed scan network information element + * + * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field + * in struct iwl3945_scan_channel; each channel may select different ssids from + * among the 4 entries. SSID IEs get transmitted in reverse order of entry. + */ +struct iwl3945_ssid_ie { + u8 id; + u8 len; + u8 ssid[32]; +} __attribute__ ((packed)); + +#define PROBE_OPTION_MAX 0x4 +#define TX_CMD_LIFE_TIME_INFINITE __constant_cpu_to_le32(0xFFFFFFFF) +#define IWL_GOOD_CRC_TH __constant_cpu_to_le16(1) +#define IWL_MAX_SCAN_SIZE 1024 + +/* + * REPLY_SCAN_CMD = 0x80 (command) + * + * The hardware scan command is very powerful; the driver can set it up to + * maintain (relatively) normal network traffic while doing a scan in the + * background. The max_out_time and suspend_time control the ratio of how + * long the device stays on an associated network channel ("service channel") + * vs. how long it's away from the service channel, tuned to other channels + * for scanning. + * + * max_out_time is the max time off-channel (in usec), and suspend_time + * is how long (in "extended beacon" format) that the scan is "suspended" + * after returning to the service channel. That is, suspend_time is the + * time that we stay on the service channel, doing normal work, between + * scan segments. The driver may set these parameters differently to support + * scanning when associated vs. not associated, and light vs. heavy traffic + * loads when associated. + * + * After receiving this command, the device's scan engine does the following; + * + * 1) Sends SCAN_START notification to driver + * 2) Checks to see if it has time to do scan for one channel + * 3) Sends NULL packet, with power-save (PS) bit set to 1, + * to tell AP that we're going off-channel + * 4) Tunes to first channel in scan list, does active or passive scan + * 5) Sends SCAN_RESULT notification to driver + * 6) Checks to see if it has time to do scan on *next* channel in list + * 7) Repeats 4-6 until it no longer has time to scan the next channel + * before max_out_time expires + * 8) Returns to service channel + * 9) Sends NULL packet with PS=0 to tell AP that we're back + * 10) Stays on service channel until suspend_time expires + * 11) Repeats entire process 2-10 until list is complete + * 12) Sends SCAN_COMPLETE notification + * + * For fast, efficient scans, the scan command also has support for staying on + * a channel for just a short time, if doing active scanning and getting no + * responses to the transmitted probe request. This time is controlled by + * quiet_time, and the number of received packets below which a channel is + * considered "quiet" is controlled by quiet_plcp_threshold. + * + * For active scanning on channels that have regulatory restrictions against + * blindly transmitting, the scan can listen before transmitting, to make sure + * that there is already legitimate activity on the channel. If enough + * packets are cleanly received on the channel (controlled by good_CRC_th, + * typical value 1), the scan engine starts transmitting probe requests. + * + * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. + * + * To avoid uCode errors, see timing restrictions described under + * struct iwl3945_scan_channel. + */ +struct iwl3945_scan_cmd { + __le16 len; + u8 reserved0; + u8 channel_count; /* # channels in channel list */ + __le16 quiet_time; /* dwell only this # millisecs on quiet channel + * (only for active scan) */ + __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ + __le16 good_CRC_th; /* passive -> active promotion threshold */ + __le16 reserved1; + __le32 max_out_time; /* max usec to be away from associated (service) + * channel */ + __le32 suspend_time; /* pause scan this long (in "extended beacon + * format") when returning to service channel: + * 3945; 31:24 # beacons, 19:0 additional usec, + * 4965; 31:22 # beacons, 21:0 additional usec. + */ + __le32 flags; /* RXON_FLG_* */ + __le32 filter_flags; /* RXON_FILTER_* */ + + /* For active scans (set to all-0s for passive scans). + * Does not include payload. Must specify Tx rate; no rate scaling. */ + struct iwl3945_tx_cmd tx_cmd; + + /* For directed active scans (set to all-0s otherwise) */ + struct iwl3945_ssid_ie direct_scan[PROBE_OPTION_MAX]; + + /* + * Probe request frame, followed by channel list. + * + * Size of probe request frame is specified by byte count in tx_cmd. + * Channel list follows immediately after probe request frame. + * Number of channels in list is specified by channel_count. + * Each channel in list is of type: + * + * struct iwl3945_scan_channel channels[0]; + * + * NOTE: Only one band of channels can be scanned per pass. You + * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait + * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) + * before requesting another scan. + */ + u8 data[0]; +} __attribute__ ((packed)); + +/* Can abort will notify by complete notification with abort status. */ +#define CAN_ABORT_STATUS __constant_cpu_to_le32(0x1) +/* complete notification statuses */ +#define ABORT_STATUS 0x2 + +/* + * REPLY_SCAN_CMD = 0x80 (response) + */ +struct iwl3945_scanreq_notification { + __le32 status; /* 1: okay, 2: cannot fulfill request */ +} __attribute__ ((packed)); + +/* + * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) + */ +struct iwl3945_scanstart_notification { + __le32 tsf_low; + __le32 tsf_high; + __le32 beacon_timer; + u8 channel; + u8 band; + u8 reserved[2]; + __le32 status; +} __attribute__ ((packed)); + +#define SCAN_OWNER_STATUS 0x1; +#define MEASURE_OWNER_STATUS 0x2; + +#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */ +/* + * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) + */ +struct iwl3945_scanresults_notification { + u8 channel; + u8 band; + u8 reserved[2]; + __le32 tsf_low; + __le32 tsf_high; + __le32 statistics[NUMBER_OF_STATISTICS]; +} __attribute__ ((packed)); + +/* + * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) + */ +struct iwl3945_scancomplete_notification { + u8 scanned_channels; + u8 status; + u8 reserved; + u8 last_channel; + __le32 tsf_low; + __le32 tsf_high; +} __attribute__ ((packed)); + + +/****************************************************************************** + * (9) + * IBSS/AP Commands and Notifications: + * + *****************************************************************************/ + +/* + * BEACON_NOTIFICATION = 0x90 (notification only, not a command) + */ +struct iwl3945_beacon_notif { + struct iwl3945_tx_resp beacon_notify_hdr; + __le32 low_tsf; + __le32 high_tsf; + __le32 ibss_mgr_status; +} __attribute__ ((packed)); + +/* + * REPLY_TX_BEACON = 0x91 (command, has simple generic response) + */ +struct iwl3945_tx_beacon_cmd { + struct iwl3945_tx_cmd tx; + __le16 tim_idx; + u8 tim_size; + u8 reserved1; + struct ieee80211_hdr frame[0]; /* beacon frame */ +} __attribute__ ((packed)); + +/****************************************************************************** + * (10) + * Statistics Commands and Notifications: + * + *****************************************************************************/ + +#define IWL_TEMP_CONVERT 260 + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +/* Used for passing to driver number of successes and failures per rate */ +struct rate_histogram { + union { + __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } success; + union { + __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; + __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; + __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; + } failed; +} __attribute__ ((packed)); + +/* statistics command response */ + +struct statistics_rx_phy { + __le32 ina_cnt; + __le32 fina_cnt; + __le32 plcp_err; + __le32 crc32_err; + __le32 overrun_err; + __le32 early_overrun_err; + __le32 crc32_good; + __le32 false_alarm_cnt; + __le32 fina_sync_err_cnt; + __le32 sfd_timeout; + __le32 fina_timeout; + __le32 unresponded_rts; + __le32 rxe_frame_limit_overrun; + __le32 sent_ack_cnt; + __le32 sent_cts_cnt; +} __attribute__ ((packed)); + +struct statistics_rx_non_phy { + __le32 bogus_cts; /* CTS received when not expecting CTS */ + __le32 bogus_ack; /* ACK received when not expecting ACK */ + __le32 non_bssid_frames; /* number of frames with BSSID that + * doesn't belong to the STA BSSID */ + __le32 filtered_frames; /* count frames that were dumped in the + * filtering process */ + __le32 non_channel_beacons; /* beacons with our bss id but not on + * our serving channel */ +} __attribute__ ((packed)); + +struct statistics_rx { + struct statistics_rx_phy ofdm; + struct statistics_rx_phy cck; + struct statistics_rx_non_phy general; +} __attribute__ ((packed)); + +struct statistics_tx { + __le32 preamble_cnt; + __le32 rx_detected_cnt; + __le32 bt_prio_defer_cnt; + __le32 bt_prio_kill_cnt; + __le32 few_bytes_cnt; + __le32 cts_timeout; + __le32 ack_timeout; + __le32 expected_ack_cnt; + __le32 actual_ack_cnt; +} __attribute__ ((packed)); + +struct statistics_dbg { + __le32 burst_check; + __le32 burst_count; + __le32 reserved[4]; +} __attribute__ ((packed)); + +struct statistics_div { + __le32 tx_on_a; + __le32 tx_on_b; + __le32 exec_time; + __le32 probe_time; +} __attribute__ ((packed)); + +struct statistics_general { + __le32 temperature; + struct statistics_dbg dbg; + __le32 sleep_time; + __le32 slots_out; + __le32 slots_idle; + __le32 ttl_timestamp; + struct statistics_div div; +} __attribute__ ((packed)); + +/* + * REPLY_STATISTICS_CMD = 0x9c, + * 3945 and 4965 identical. + * + * This command triggers an immediate response containing uCode statistics. + * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below. + * + * If the CLEAR_STATS configuration flag is set, uCode will clear its + * internal copy of the statistics (counters) after issuing the response. + * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below). + * + * If the DISABLE_NOTIF configuration flag is set, uCode will not issue + * STATISTICS_NOTIFICATIONs after received beacons (see below). This flag + * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself. + */ +#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1) /* see above */ +#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */ +struct iwl3945_statistics_cmd { + __le32 configuration_flags; /* IWL_STATS_CONF_* */ +} __attribute__ ((packed)); + +/* + * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) + * + * By default, uCode issues this notification after receiving a beacon + * while associated. To disable this behavior, set DISABLE_NOTIF flag in the + * REPLY_STATISTICS_CMD 0x9c, above. + * + * Statistics counters continue to increment beacon after beacon, but are + * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD + * 0x9c with CLEAR_STATS bit set (see above). + * + * uCode also issues this notification during scans. uCode clears statistics + * appropriately so that each notification contains statistics for only the + * one channel that has just been scanned. + */ +#define STATISTICS_REPLY_FLG_BAND_24G_MSK __constant_cpu_to_le32(0x2) +#define STATISTICS_REPLY_FLG_FAT_MODE_MSK __constant_cpu_to_le32(0x8) +struct iwl3945_notif_statistics { + __le32 flag; + struct statistics_rx rx; + struct statistics_tx tx; + struct statistics_general general; +} __attribute__ ((packed)); + + +/* + * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command) + */ +/* if ucode missed CONSECUTIVE_MISSED_BCONS_TH beacons in a row, + * then this notification will be sent. */ +#define CONSECUTIVE_MISSED_BCONS_TH 20 + +struct iwl3945_missed_beacon_notif { + __le32 consequtive_missed_beacons; + __le32 total_missed_becons; + __le32 num_expected_beacons; + __le32 num_recvd_beacons; +} __attribute__ ((packed)); + +/****************************************************************************** + * (11) + * Rx Calibration Commands: + * + *****************************************************************************/ + +#define PHY_CALIBRATE_DIFF_GAIN_CMD (7) +#define HD_TABLE_SIZE (11) + +struct iwl3945_sensitivity_cmd { + __le16 control; + __le16 table[HD_TABLE_SIZE]; +} __attribute__ ((packed)); + +struct iwl3945_calibration_cmd { + u8 opCode; + u8 flags; + __le16 reserved; + s8 diff_gain_a; + s8 diff_gain_b; + s8 diff_gain_c; + u8 reserved1; +} __attribute__ ((packed)); + +/****************************************************************************** + * (12) + * Miscellaneous Commands: + * + *****************************************************************************/ + +/* + * LEDs Command & Response + * REPLY_LEDS_CMD = 0x48 (command, has simple generic response) + * + * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), + * this command turns it on or off, or sets up a periodic blinking cycle. + */ +struct iwl3945_led_cmd { + __le32 interval; /* "interval" in uSec */ + u8 id; /* 1: Activity, 2: Link, 3: Tech */ + u8 off; /* # intervals off while blinking; + * "0", with >0 "on" value, turns LED on */ + u8 on; /* # intervals on while blinking; + * "0", regardless of "off", turns LED off */ + u8 reserved; +} __attribute__ ((packed)); + +/****************************************************************************** + * (13) + * Union of all expected notifications/responses: + * + *****************************************************************************/ + +struct iwl3945_rx_packet { + __le32 len; + struct iwl3945_cmd_header hdr; + union { + struct iwl3945_alive_resp alive_frame; + struct iwl3945_rx_frame rx_frame; + struct iwl3945_tx_resp tx_resp; + struct iwl3945_spectrum_notification spectrum_notif; + struct iwl3945_csa_notification csa_notif; + struct iwl3945_error_resp err_resp; + struct iwl3945_card_state_notif card_state_notif; + struct iwl3945_beacon_notif beacon_status; + struct iwl3945_add_sta_resp add_sta; + struct iwl3945_sleep_notification sleep_notif; + struct iwl3945_spectrum_resp spectrum; + struct iwl3945_notif_statistics stats; + __le32 status; + u8 raw[0]; + } u; +} __attribute__ ((packed)); + +#define IWL_RX_FRAME_SIZE (4 + sizeof(struct iwl3945_rx_frame)) + +#endif /* __iwl3945_3945_commands_h__ */ |
