diff options
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-4965-lib.c')
| -rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-4965-lib.c | 1194 |
1 files changed, 0 insertions, 1194 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c deleted file mode 100644 index 2be6d9e..0000000 --- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c +++ /dev/null @@ -1,1194 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-helpers.h" -#include "iwl-4965-hw.h" -#include "iwl-4965.h" -#include "iwl-sta.h" - -void iwl4965_check_abort_status(struct iwl_priv *priv, - u8 frame_count, u32 status) -{ - if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { - IWL_ERR(priv, "Tx flush command to flush out all frames\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->tx_flush); - } -} - -/* - * EEPROM - */ -struct iwl_mod_params iwl4965_mod_params = { - .amsdu_size_8K = 1, - .restart_fw = 1, - /* the rest are 0 by default */ -}; - -void iwl4965_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - unsigned long flags; - int i; - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_legacy_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } - - for (i = 0; i < RX_QUEUE_SIZE; i++) - rxq->queue[i] = NULL; - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->write_actual = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); -} - -int iwl4965_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - u32 rb_size; - const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ - u32 rb_timeout = 0; - - if (priv->cfg->mod_params->amsdu_size_8K) - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; - else - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; - - /* Stop Rx DMA */ - iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - - /* Reset driver's Rx queue write index */ - iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); - - /* Tell device where to find RBD circular buffer in DRAM */ - iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - (u32)(rxq->bd_dma >> 8)); - - /* Tell device where in DRAM to update its Rx status */ - iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, - rxq->rb_stts_dma >> 4); - - /* Enable Rx DMA - * Direct rx interrupts to hosts - * Rx buffer size 4 or 8k - * RB timeout 0x10 - * 256 RBDs - */ - iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | - rb_size| - (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| - (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); - - /* Set interrupt coalescing timer to default (2048 usecs) */ - iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); - - return 0; -} - -static void iwl4965_set_pwr_vmain(struct iwl_priv *priv) -{ -/* - * (for documentation purposes) - * to set power to V_AUX, do: - - if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) - iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - */ - - iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); -} - -int iwl4965_hw_nic_init(struct iwl_priv *priv) -{ - unsigned long flags; - struct iwl_rx_queue *rxq = &priv->rxq; - int ret; - - /* nic_init */ - spin_lock_irqsave(&priv->lock, flags); - priv->cfg->ops->lib->apm_ops.init(priv); - - /* Set interrupt coalescing calibration timer to default (512 usecs) */ - iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); - - spin_unlock_irqrestore(&priv->lock, flags); - - iwl4965_set_pwr_vmain(priv); - - priv->cfg->ops->lib->apm_ops.config(priv); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - ret = iwl_legacy_rx_queue_alloc(priv); - if (ret) { - IWL_ERR(priv, "Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - iwl4965_rx_queue_reset(priv, rxq); - - iwl4965_rx_replenish(priv); - - iwl4965_rx_init(priv, rxq); - - spin_lock_irqsave(&priv->lock, flags); - - rxq->need_update = 1; - iwl_legacy_rx_queue_update_write_ptr(priv, rxq); - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Allocate or reset and init all Tx and Command queues */ - if (!priv->txq) { - ret = iwl4965_txq_ctx_alloc(priv); - if (ret) - return ret; - } else - iwl4965_txq_ctx_reset(priv); - - set_bit(STATUS_INIT, &priv->status); - - return 0; -} - -/** - * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl_priv *priv, - dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)(dma_addr >> 8)); -} - -/** - * iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -void iwl4965_rx_queue_restock(struct iwl_priv *priv) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - - spin_lock_irqsave(&rxq->lock, flags); - while ((iwl_legacy_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* The overwritten rxb must be a used one */ - rxb = rxq->queue[rxq->write]; - BUG_ON(rxb && rxb->page); - - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv, - rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(priv->workqueue, &priv->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if (rxq->write_actual != (rxq->write & ~0x7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_legacy_rx_queue_update_write_ptr(priv, rxq); - } -} - -/** - * iwl4965_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void iwl4965_rx_allocate(struct iwl_priv *priv, gfp_t priority) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (priv->hw_params.rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(priv, "alloc_pages failed, " - "order: %d\n", - priv->hw_params.rx_page_order); - - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(priv, - "Failed to alloc_pages with %s. " - "Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? - "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - return; - } - - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, priv->hw_params.rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - spin_unlock_irqrestore(&rxq->lock, flags); - - BUG_ON(rxb->page); - rxb->page = page; - /* Get physical address of the RB */ - rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - /* dma address must be no more than 36 bits */ - BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); - /* and also 256 byte aligned! */ - BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - priv->alloc_rxb_page++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwl4965_rx_replenish(struct iwl_priv *priv) -{ - unsigned long flags; - - iwl4965_rx_allocate(priv, GFP_KERNEL); - - spin_lock_irqsave(&priv->lock, flags); - iwl4965_rx_queue_restock(priv); - spin_unlock_irqrestore(&priv->lock, flags); -} - -void iwl4965_rx_replenish_now(struct iwl_priv *priv) -{ - iwl4965_rx_allocate(priv, GFP_ATOMIC); - - iwl4965_rx_queue_restock(priv); -} - -/* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have its SKB set to NULL - * This free routine walks the list of POOL entries and if SKB is set to - * non NULL it is unmapped and freed - */ -void iwl4965_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - int i; - for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_legacy_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - } - - dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, - rxq->bd_dma); - dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), - rxq->rb_stts, rxq->rb_stts_dma); - rxq->bd = NULL; - rxq->rb_stts = NULL; -} - -int iwl4965_rxq_stop(struct iwl_priv *priv) -{ - - /* stop Rx DMA */ - iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, - FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); - - return 0; -} - -int iwl4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) -{ - int idx = 0; - int band_offset = 0; - - /* HT rate format: mac80211 wants an MCS number, which is just LSB */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - return idx; - /* Legacy rate format, search for match in table */ - } else { - if (band == IEEE80211_BAND_5GHZ) - band_offset = IWL_FIRST_OFDM_RATE; - for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) - if (iwlegacy_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx - band_offset; - } - - return -1; -} - -static int iwl4965_calc_rssi(struct iwl_priv *priv, - struct iwl_rx_phy_res *rx_resp) -{ - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host. */ - struct iwl4965_rx_non_cfg_phy *ncphy = - (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; - u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) - >> IWL49_AGC_DB_POS; - - u32 valid_antennae = - (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) - >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; - u8 max_rssi = 0; - u32 i; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. */ - for (i = 0; i < 3; i++) - if (valid_antennae & (1 << i)) - max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - - IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", - ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], - max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc - IWL4965_RSSI_OFFSET; -} - - -static u32 iwl4965_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) -{ - u32 decrypt_out = 0; - - if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == - RX_RES_STATUS_STATION_FOUND) - decrypt_out |= (RX_RES_STATUS_STATION_FOUND | - RX_RES_STATUS_NO_STATION_INFO_MISMATCH); - - decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); - - /* packet was not encrypted */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_NONE) - return decrypt_out; - - /* packet was encrypted with unknown alg */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_ERR) - return decrypt_out; - - /* decryption was not done in HW */ - if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != - RX_MPDU_RES_STATUS_DEC_DONE_MSK) - return decrypt_out; - - switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { - - case RX_RES_STATUS_SEC_TYPE_CCMP: - /* alg is CCM: check MIC only */ - if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) - /* Bad MIC */ - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - - break; - - case RX_RES_STATUS_SEC_TYPE_TKIP: - if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { - /* Bad TTAK */ - decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; - break; - } - /* fall through if TTAK OK */ - default: - if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - break; - } - - IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n", - decrypt_in, decrypt_out); - - return decrypt_out; -} - -static void iwl4965_pass_packet_to_mac80211(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - u16 len, - u32 ampdu_status, - struct iwl_rx_mem_buffer *rxb, - struct ieee80211_rx_status *stats) -{ - struct sk_buff *skb; - __le16 fc = hdr->frame_control; - - /* We only process data packets if the interface is open */ - if (unlikely(!priv->is_open)) { - IWL_DEBUG_DROP_LIMIT(priv, - "Dropping packet while interface is not open.\n"); - return; - } - - /* In case of HW accelerated crypto and bad decryption, drop */ - if (!priv->cfg->mod_params->sw_crypto && - iwl_legacy_set_decrypted_flag(priv, hdr, ampdu_status, stats)) - return; - - skb = dev_alloc_skb(128); - if (!skb) { - IWL_ERR(priv, "dev_alloc_skb failed\n"); - return; - } - - skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len); - - iwl_legacy_update_stats(priv, false, fc, len); - memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - - ieee80211_rx(priv->hw, skb); - priv->alloc_rxb_page--; - rxb->page = NULL; -} - -/* Called for REPLY_RX (legacy ABG frames), or - * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ -void iwl4965_rx_reply_rx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_rx_phy_res *phy_res; - __le32 rx_pkt_status; - struct iwl_rx_mpdu_res_start *amsdu; - u32 len; - u32 ampdu_status; - u32 rate_n_flags; - - /** - * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently. - * REPLY_RX: physical layer info is in this buffer - * REPLY_RX_MPDU_CMD: physical layer info was sent in separate - * command and cached in priv->last_phy_res - * - * Here we set up local variables depending on which command is - * received. - */ - if (pkt->hdr.cmd == REPLY_RX) { - phy_res = (struct iwl_rx_phy_res *)pkt->u.raw; - header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) - + phy_res->cfg_phy_cnt); - - len = le16_to_cpu(phy_res->byte_count); - rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) + - phy_res->cfg_phy_cnt + len); - ampdu_status = le32_to_cpu(rx_pkt_status); - } else { - if (!priv->_4965.last_phy_res_valid) { - IWL_ERR(priv, "MPDU frame without cached PHY data\n"); - return; - } - phy_res = &priv->_4965.last_phy_res; - amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw; - header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); - len = le16_to_cpu(amsdu->byte_count); - rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len); - ampdu_status = iwl4965_translate_rx_status(priv, - le32_to_cpu(rx_pkt_status)); - } - - if ((unlikely(phy_res->cfg_phy_cnt > 20))) { - IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", - phy_res->cfg_phy_cnt); - return; - } - - if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || - !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", - le32_to_cpu(rx_pkt_status)); - return; - } - - /* This will be used in several places later */ - rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); - - /* rx_status carries information about the packet to mac80211 */ - rx_status.mactime = le64_to_cpu(phy_res->timestamp); - rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), - rx_status.band); - rx_status.rate_idx = - iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); - rx_status.flag = 0; - - /* TSF isn't reliable. In order to allow smooth user experience, - * this W/A doesn't propagate it to the mac80211 */ - /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ - - priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); - - /* Find max signal strength (dBm) among 3 antenna/receiver chains */ - rx_status.signal = iwl4965_calc_rssi(priv, phy_res); - - iwl_legacy_dbg_log_rx_data_frame(priv, len, header); - IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n", - rx_status.signal, (unsigned long long)rx_status.mactime); - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bit field. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favor of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - rx_status.antenna = - (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) - >> RX_RES_PHY_FLAGS_ANTENNA_POS; - - /* set the preamble flag if appropriate */ - if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - /* Set up the HT phy flags */ - if (rate_n_flags & RATE_MCS_HT_MSK) - rx_status.flag |= RX_FLAG_HT; - if (rate_n_flags & RATE_MCS_HT40_MSK) - rx_status.flag |= RX_FLAG_40MHZ; - if (rate_n_flags & RATE_MCS_SGI_MSK) - rx_status.flag |= RX_FLAG_SHORT_GI; - - iwl4965_pass_packet_to_mac80211(priv, header, len, ampdu_status, - rxb, &rx_status); -} - -/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). - * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ -void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - priv->_4965.last_phy_res_valid = true; - memcpy(&priv->_4965.last_phy_res, pkt->u.raw, - sizeof(struct iwl_rx_phy_res)); -} - -static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - u8 is_active, u8 n_probes, - struct iwl_scan_channel *scan_ch) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - u16 channel; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - active_dwell = iwl_legacy_get_active_dwell_time(priv, band, n_probes); - passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { - chan = priv->scan_request->channels[i]; - - if (chan->band != band) - continue; - - channel = chan->hw_value; - scan_ch->channel = cpu_to_le16(channel); - - ch_info = iwl_legacy_get_channel_info(priv, band, channel); - if (!iwl_legacy_is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN(priv, - "Channel %d is INVALID for this band.\n", - channel); - continue; - } - - if (!is_active || iwl_legacy_is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - - if (n_probes) - scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - - IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", - channel, le32_to_cpu(scan_ch->type), - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - "ACTIVE" : "PASSIVE", - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); - return added; -} - -int iwl4965_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = sizeof(struct iwl_scan_cmd), - .flags = CMD_SIZE_HUGE, - }; - struct iwl_scan_cmd *scan; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u32 rate_flags = 0; - u16 cmd_len; - u16 rx_chain = 0; - enum ieee80211_band band; - u8 n_probes = 0; - u8 rx_ant = priv->hw_params.valid_rx_ant; - u8 rate; - bool is_active = false; - int chan_mod; - u8 active_chains; - u8 scan_tx_antennas = priv->hw_params.valid_tx_ant; - int ret; - - lockdep_assert_held(&priv->mutex); - - if (vif) - ctx = iwl_legacy_rxon_ctx_from_vif(vif); - - if (!priv->scan_cmd) { - priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan_cmd) { - IWL_DEBUG_SCAN(priv, - "fail to allocate memory for scan\n"); - return -ENOMEM; - } - } - scan = priv->scan_cmd; - memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_legacy_is_any_associated(priv)) { - u16 interval; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - - IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); - interval = vif->bss_conf.beacon_int; - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = (extra | - ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - if (priv->scan_request->n_ssids) { - int i, p = 0; - IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); - for (i = 0; i < priv->scan_request->n_ssids; i++) { - /* always does wildcard anyway */ - if (!priv->scan_request->ssids[i].ssid_len) - continue; - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - priv->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - priv->scan_request->ssids[i].ssid, - priv->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = ctx->bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - switch (priv->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - chan_mod = le32_to_cpu( - priv->contexts[IWL_RXON_CTX_BSS].active.flags & - RXON_FLG_CHANNEL_MODE_MSK) - >> RXON_FLG_CHANNEL_MODE_POS; - if (chan_mod == CHANNEL_MODE_PURE_40) { - rate = IWL_RATE_6M_PLCP; - } else { - rate = IWL_RATE_1M_PLCP; - rate_flags = RATE_MCS_CCK_MSK; - } - break; - case IEEE80211_BAND_5GHZ: - rate = IWL_RATE_6M_PLCP; - break; - default: - IWL_WARN(priv, "Invalid scan band\n"); - return -EIO; - } - - /* - * If active scanning is requested but a certain channel is - * marked passive, we can do active scanning if we detect - * transmissions. - * - * There is an issue with some firmware versions that triggers - * a sysassert on a "good CRC threshold" of zero (== disabled), - * on a radar channel even though this means that we should NOT - * send probes. - * - * The "good CRC threshold" is the number of frames that we - * need to receive during our dwell time on a channel before - * sending out probes -- setting this to a huge value will - * mean we never reach it, but at the same time work around - * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER - * here instead of IWL_GOOD_CRC_TH_DISABLED. - */ - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_NEVER; - - band = priv->scan_band; - - if (priv->cfg->scan_rx_antennas[band]) - rx_ant = priv->cfg->scan_rx_antennas[band]; - - priv->scan_tx_ant[band] = iwl4965_toggle_tx_ant(priv, - priv->scan_tx_ant[band], - scan_tx_antennas); - rate_flags |= iwl4965_ant_idx_to_flags(priv->scan_tx_ant[band]); - scan->tx_cmd.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, rate_flags); - - /* In power save mode use one chain, otherwise use all chains */ - if (test_bit(STATUS_POWER_PMI, &priv->status)) { - /* rx_ant has been set to all valid chains previously */ - active_chains = rx_ant & - ((u8)(priv->chain_noise_data.active_chains)); - if (!active_chains) - active_chains = rx_ant; - - IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", - priv->chain_noise_data.active_chains); - - rx_ant = iwl4965_first_antenna(active_chains); - } - - /* MIMO is not used here, but value is required */ - rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; - rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; - scan->rx_chain = cpu_to_le16(rx_chain); - - cmd_len = iwl_legacy_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - vif->addr, - priv->scan_request->ie, - priv->scan_request->ie_len, - IWL_MAX_SCAN_SIZE - sizeof(*scan)); - scan->tx_cmd.len = cpu_to_le16(cmd_len); - - scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | - RXON_FILTER_BCON_AWARE_MSK); - - scan->channel_count = iwl4965_get_channels_for_scan(priv, vif, band, - is_active, n_probes, - (void *)&scan->data[cmd_len]); - if (scan->channel_count == 0) { - IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - set_bit(STATUS_SCAN_HW, &priv->status); - - ret = iwl_legacy_send_cmd_sync(priv, &cmd); - if (ret) - clear_bit(STATUS_SCAN_HW, &priv->status); - - return ret; -} - -int iwl4965_manage_ibss_station(struct iwl_priv *priv, - struct ieee80211_vif *vif, bool add) -{ - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - - if (add) - return iwl4965_add_bssid_station(priv, vif_priv->ctx, - vif->bss_conf.bssid, - &vif_priv->ibss_bssid_sta_id); - return iwl_legacy_remove_station(priv, vif_priv->ibss_bssid_sta_id, - vif->bss_conf.bssid); -} - -void iwl4965_free_tfds_in_queue(struct iwl_priv *priv, - int sta_id, int tid, int freed) -{ - lockdep_assert_held(&priv->sta_lock); - - if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) - priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; - else { - IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n", - priv->stations[sta_id].tid[tid].tfds_in_queue, - freed); - priv->stations[sta_id].tid[tid].tfds_in_queue = 0; - } -} - -#define IWL_TX_QUEUE_MSK 0xfffff - -static bool iwl4965_is_single_rx_stream(struct iwl_priv *priv) -{ - return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || - priv->current_ht_config.single_chain_sufficient; -} - -#define IWL_NUM_RX_CHAINS_MULTIPLE 3 -#define IWL_NUM_RX_CHAINS_SINGLE 2 -#define IWL_NUM_IDLE_CHAINS_DUAL 2 -#define IWL_NUM_IDLE_CHAINS_SINGLE 1 - -/* - * Determine how many receiver/antenna chains to use. - * - * More provides better reception via diversity. Fewer saves power - * at the expense of throughput, but only when not in powersave to - * start with. - * - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. - */ -static int iwl4965_get_active_rx_chain_count(struct iwl_priv *priv) -{ - /* # of Rx chains to use when expecting MIMO. */ - if (iwl4965_is_single_rx_stream(priv)) - return IWL_NUM_RX_CHAINS_SINGLE; - else - return IWL_NUM_RX_CHAINS_MULTIPLE; -} - -/* - * When we are in power saving mode, unless device support spatial - * multiplexing power save, use the active count for rx chain count. - */ -static int -iwl4965_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) -{ - /* # Rx chains when idling, depending on SMPS mode */ - switch (priv->current_ht_config.smps) { - case IEEE80211_SMPS_STATIC: - case IEEE80211_SMPS_DYNAMIC: - return IWL_NUM_IDLE_CHAINS_SINGLE; - case IEEE80211_SMPS_OFF: - return active_cnt; - default: - WARN(1, "invalid SMPS mode %d", - priv->current_ht_config.smps); - return active_cnt; - } -} - -/* up to 4 chains */ -static u8 iwl4965_count_chain_bitmap(u32 chain_bitmap) -{ - u8 res; - res = (chain_bitmap & BIT(0)) >> 0; - res += (chain_bitmap & BIT(1)) >> 1; - res += (chain_bitmap & BIT(2)) >> 2; - res += (chain_bitmap & BIT(3)) >> 3; - return res; -} - -/** - * iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void iwl4965_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - bool is_single = iwl4965_is_single_rx_stream(priv); - bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); - u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; - u32 active_chains; - u16 rx_chain; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, iwl4965_chain_noise_calibration() - * checks which antennas actually *are* connected. */ - if (priv->chain_noise_data.active_chains) - active_chains = priv->chain_noise_data.active_chains; - else - active_chains = priv->hw_params.valid_rx_ant; - - rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; - - /* How many receivers should we use? */ - active_rx_cnt = iwl4965_get_active_rx_chain_count(priv); - idle_rx_cnt = iwl4965_get_idle_rx_chain_count(priv, active_rx_cnt); - - - /* correct rx chain count according hw settings - * and chain noise calibration - */ - valid_rx_cnt = iwl4965_count_chain_bitmap(active_chains); - if (valid_rx_cnt < active_rx_cnt) - active_rx_cnt = valid_rx_cnt; - - if (valid_rx_cnt < idle_rx_cnt) - idle_rx_cnt = valid_rx_cnt; - - rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; - rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; - - ctx->staging.rx_chain = cpu_to_le16(rx_chain); - - if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) - ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", - ctx->staging.rx_chain, - active_rx_cnt, idle_rx_cnt); - - WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || - active_rx_cnt < idle_rx_cnt); -} - -u8 iwl4965_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) -{ - int i; - u8 ind = ant; - - for (i = 0; i < RATE_ANT_NUM - 1; i++) { - ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; - if (valid & BIT(ind)) - return ind; - } - return ant; -} - -static const char *iwl4965_get_fh_string(int cmd) -{ - switch (cmd) { - IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); - IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); - IWL_CMD(FH_RSCSR_CHNL0_WPTR); - IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); - IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); - IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG); - IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); - IWL_CMD(FH_TSSR_TX_STATUS_REG); - IWL_CMD(FH_TSSR_TX_ERROR_REG); - default: - return "UNKNOWN"; - } -} - -int iwl4965_dump_fh(struct iwl_priv *priv, char **buf, bool display) -{ - int i; -#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif - static const u32 fh_tbl[] = { - FH_RSCSR_CHNL0_STTS_WPTR_REG, - FH_RSCSR_CHNL0_RBDCB_BASE_REG, - FH_RSCSR_CHNL0_WPTR, - FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_MEM_RSSR_SHARED_CTRL_REG, - FH_MEM_RSSR_RX_STATUS_REG, - FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, - FH_TSSR_TX_STATUS_REG, - FH_TSSR_TX_ERROR_REG - }; -#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - pos += scnprintf(*buf + pos, bufsz - pos, - "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - pos += scnprintf(*buf + pos, bufsz - pos, - " %34s: 0X%08x\n", - iwl4965_get_fh_string(fh_tbl[i]), - iwl_legacy_read_direct32(priv, fh_tbl[i])); - } - return pos; - } -#endif - IWL_ERR(priv, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - IWL_ERR(priv, " %34s: 0X%08x\n", - iwl4965_get_fh_string(fh_tbl[i]), - iwl_legacy_read_direct32(priv, fh_tbl[i])); - } - return 0; -} |
