diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlegacy/3945.c')
| -rw-r--r-- | drivers/net/wireless/intel/iwlegacy/3945.c | 2741 |
1 files changed, 2741 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlegacy/3945.c b/drivers/net/wireless/intel/iwlegacy/3945.c new file mode 100644 index 0000000..93bdf68 --- /dev/null +++ b/drivers/net/wireless/intel/iwlegacy/3945.c @@ -0,0 +1,2741 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <asm/unaligned.h> +#include <net/mac80211.h> + +#include "common.h" +#include "3945.h" + +/* Send led command */ +static int +il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd) +{ + struct il_host_cmd cmd = { + .id = C_LEDS, + .len = sizeof(struct il_led_cmd), + .data = led_cmd, + .flags = CMD_ASYNC, + .callback = NULL, + }; + + return il_send_cmd(il, &cmd); +} + +#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ + [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \ + RATE_##r##M_IEEE, \ + RATE_##ip##M_IDX, \ + RATE_##in##M_IDX, \ + RATE_##rp##M_IDX, \ + RATE_##rn##M_IDX, \ + RATE_##pp##M_IDX, \ + RATE_##np##M_IDX, \ + RATE_##r##M_IDX_TBL, \ + RATE_##ip##M_IDX_TBL } + +/* + * Parameter order: + * rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to RATE_INVALID + * + */ +const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = { + IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ + IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ + IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */ +}; + +static inline u8 +il3945_get_prev_ieee_rate(u8 rate_idx) +{ + u8 rate = il3945_rates[rate_idx].prev_ieee; + + if (rate == RATE_INVALID) + rate = rate_idx; + return rate; +} + +/* 1 = enable the il3945_disable_events() function */ +#define IL_EVT_DISABLE (0) +#define IL_EVT_DISABLE_SIZE (1532/32) + +/** + * il3945_disable_events - Disable selected events in uCode event log + * + * Disable an event by writing "1"s into "disable" + * bitmap in SRAM. Bit position corresponds to Event # (id/type). + * Default values of 0 enable uCode events to be logged. + * Use for only special debugging. This function is just a placeholder as-is, + * you'll need to provide the special bits! ... + * ... and set IL_EVT_DISABLE to 1. */ +void +il3945_disable_events(struct il_priv *il) +{ + int i; + u32 base; /* SRAM address of event log header */ + u32 disable_ptr; /* SRAM address of event-disable bitmap array */ + u32 array_size; /* # of u32 entries in array */ + static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = { + 0x00000000, /* 31 - 0 Event id numbers */ + 0x00000000, /* 63 - 32 */ + 0x00000000, /* 95 - 64 */ + 0x00000000, /* 127 - 96 */ + 0x00000000, /* 159 - 128 */ + 0x00000000, /* 191 - 160 */ + 0x00000000, /* 223 - 192 */ + 0x00000000, /* 255 - 224 */ + 0x00000000, /* 287 - 256 */ + 0x00000000, /* 319 - 288 */ + 0x00000000, /* 351 - 320 */ + 0x00000000, /* 383 - 352 */ + 0x00000000, /* 415 - 384 */ + 0x00000000, /* 447 - 416 */ + 0x00000000, /* 479 - 448 */ + 0x00000000, /* 511 - 480 */ + 0x00000000, /* 543 - 512 */ + 0x00000000, /* 575 - 544 */ + 0x00000000, /* 607 - 576 */ + 0x00000000, /* 639 - 608 */ + 0x00000000, /* 671 - 640 */ + 0x00000000, /* 703 - 672 */ + 0x00000000, /* 735 - 704 */ + 0x00000000, /* 767 - 736 */ + 0x00000000, /* 799 - 768 */ + 0x00000000, /* 831 - 800 */ + 0x00000000, /* 863 - 832 */ + 0x00000000, /* 895 - 864 */ + 0x00000000, /* 927 - 896 */ + 0x00000000, /* 959 - 928 */ + 0x00000000, /* 991 - 960 */ + 0x00000000, /* 1023 - 992 */ + 0x00000000, /* 1055 - 1024 */ + 0x00000000, /* 1087 - 1056 */ + 0x00000000, /* 1119 - 1088 */ + 0x00000000, /* 1151 - 1120 */ + 0x00000000, /* 1183 - 1152 */ + 0x00000000, /* 1215 - 1184 */ + 0x00000000, /* 1247 - 1216 */ + 0x00000000, /* 1279 - 1248 */ + 0x00000000, /* 1311 - 1280 */ + 0x00000000, /* 1343 - 1312 */ + 0x00000000, /* 1375 - 1344 */ + 0x00000000, /* 1407 - 1376 */ + 0x00000000, /* 1439 - 1408 */ + 0x00000000, /* 1471 - 1440 */ + 0x00000000, /* 1503 - 1472 */ + }; + + base = le32_to_cpu(il->card_alive.log_event_table_ptr); + if (!il3945_hw_valid_rtc_data_addr(base)) { + IL_ERR("Invalid event log pointer 0x%08X\n", base); + return; + } + + disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32))); + array_size = il_read_targ_mem(il, base + (5 * sizeof(u32))); + + if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) { + D_INFO("Disabling selected uCode log events at 0x%x\n", + disable_ptr); + for (i = 0; i < IL_EVT_DISABLE_SIZE; i++) + il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)), + evt_disable[i]); + + } else { + D_INFO("Selected uCode log events may be disabled\n"); + D_INFO(" by writing \"1\"s into disable bitmap\n"); + D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr, + array_size); + } + +} + +static int +il3945_hwrate_to_plcp_idx(u8 plcp) +{ + int idx; + + for (idx = 0; idx < RATE_COUNT_3945; idx++) + if (il3945_rates[idx].plcp == plcp) + return idx; + return -1; +} + +#ifdef CONFIG_IWLEGACY_DEBUG +#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x + +static const char * +il3945_get_tx_fail_reason(u32 status) +{ + switch (status & TX_STATUS_MSK) { + case TX_3945_STATUS_SUCCESS: + return "SUCCESS"; + TX_STATUS_ENTRY(SHORT_LIMIT); + TX_STATUS_ENTRY(LONG_LIMIT); + TX_STATUS_ENTRY(FIFO_UNDERRUN); + TX_STATUS_ENTRY(MGMNT_ABORT); + TX_STATUS_ENTRY(NEXT_FRAG); + TX_STATUS_ENTRY(LIFE_EXPIRE); + TX_STATUS_ENTRY(DEST_PS); + TX_STATUS_ENTRY(ABORTED); + TX_STATUS_ENTRY(BT_RETRY); + TX_STATUS_ENTRY(STA_INVALID); + TX_STATUS_ENTRY(FRAG_DROPPED); + TX_STATUS_ENTRY(TID_DISABLE); + TX_STATUS_ENTRY(FRAME_FLUSHED); + TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); + TX_STATUS_ENTRY(TX_LOCKED); + TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); + } + + return "UNKNOWN"; +} +#else +static inline const char * +il3945_get_tx_fail_reason(u32 status) +{ + return ""; +} +#endif + +/* + * get ieee prev rate from rate scale table. + * for A and B mode we need to overright prev + * value + */ +int +il3945_rs_next_rate(struct il_priv *il, int rate) +{ + int next_rate = il3945_get_prev_ieee_rate(rate); + + switch (il->band) { + case IEEE80211_BAND_5GHZ: + if (rate == RATE_12M_IDX) + next_rate = RATE_9M_IDX; + else if (rate == RATE_6M_IDX) + next_rate = RATE_6M_IDX; + break; + case IEEE80211_BAND_2GHZ: + if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && + il_is_associated(il)) { + if (rate == RATE_11M_IDX) + next_rate = RATE_5M_IDX; + } + break; + + default: + break; + } + + return next_rate; +} + +/** + * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd + * + * When FW advances 'R' idx, all entries between old and new 'R' idx + * need to be reclaimed. As result, some free space forms. If there is + * enough free space (> low mark), wake the stack that feeds us. + */ +static void +il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) +{ + struct il_tx_queue *txq = &il->txq[txq_id]; + struct il_queue *q = &txq->q; + struct sk_buff *skb; + + BUG_ON(txq_id == IL39_CMD_QUEUE_NUM); + + for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; + q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { + + skb = txq->skbs[txq->q.read_ptr]; + ieee80211_tx_status_irqsafe(il->hw, skb); + txq->skbs[txq->q.read_ptr] = NULL; + il->ops->txq_free_tfd(il, txq); + } + + if (il_queue_space(q) > q->low_mark && txq_id >= 0 && + txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered) + il_wake_queue(il, txq); +} + +/** + * il3945_hdl_tx - Handle Tx response + */ +static void +il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + u16 sequence = le16_to_cpu(pkt->hdr.sequence); + int txq_id = SEQ_TO_QUEUE(sequence); + int idx = SEQ_TO_IDX(sequence); + struct il_tx_queue *txq = &il->txq[txq_id]; + struct ieee80211_tx_info *info; + struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; + u32 status = le32_to_cpu(tx_resp->status); + int rate_idx; + int fail; + + if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { + IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " + "is out of range [0-%d] %d %d\n", txq_id, idx, + txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); + return; + } + + /* + * Firmware will not transmit frame on passive channel, if it not yet + * received some valid frame on that channel. When this error happen + * we have to wait until firmware will unblock itself i.e. when we + * note received beacon or other frame. We unblock queues in + * il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed. + */ + if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && + il->iw_mode == NL80211_IFTYPE_STATION) { + il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); + D_INFO("Stopped queues - RX waiting on passive channel\n"); + } + + txq->time_stamp = jiffies; + info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]); + ieee80211_tx_info_clear_status(info); + + /* Fill the MRR chain with some info about on-chip retransmissions */ + rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate); + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx -= IL_FIRST_OFDM_RATE; + + fail = tx_resp->failure_frame; + + info->status.rates[0].idx = rate_idx; + info->status.rates[0].count = fail + 1; /* add final attempt */ + + /* tx_status->rts_retry_count = tx_resp->failure_rts; */ + info->flags |= + ((status & TX_STATUS_MSK) == + TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; + + D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id, + il3945_get_tx_fail_reason(status), status, tx_resp->rate, + tx_resp->failure_frame); + + D_TX_REPLY("Tx queue reclaim %d\n", idx); + il3945_tx_queue_reclaim(il, txq_id, idx); + + if (status & TX_ABORT_REQUIRED_MSK) + IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n"); +} + +/***************************************************************************** + * + * Intel PRO/Wireless 3945ABG/BG Network Connection + * + * RX handler implementations + * + *****************************************************************************/ +#ifdef CONFIG_IWLEGACY_DEBUGFS +static void +il3945_accumulative_stats(struct il_priv *il, __le32 * stats) +{ + int i; + __le32 *prev_stats; + u32 *accum_stats; + u32 *delta, *max_delta; + + prev_stats = (__le32 *) &il->_3945.stats; + accum_stats = (u32 *) &il->_3945.accum_stats; + delta = (u32 *) &il->_3945.delta_stats; + max_delta = (u32 *) &il->_3945.max_delta; + + for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats); + i += + sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, + accum_stats++) { + if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { + *delta = + (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); + *accum_stats += *delta; + if (*delta > *max_delta) + *max_delta = *delta; + } + } + + /* reset accumulative stats for "no-counter" type stats */ + il->_3945.accum_stats.general.temperature = + il->_3945.stats.general.temperature; + il->_3945.accum_stats.general.ttl_timestamp = + il->_3945.stats.general.ttl_timestamp; +} +#endif + +void +il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + + D_RX("Statistics notification received (%d vs %d).\n", + (int)sizeof(struct il3945_notif_stats), + le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); +#ifdef CONFIG_IWLEGACY_DEBUGFS + il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw); +#endif + + memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats)); +} + +void +il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + __le32 *flag = (__le32 *) &pkt->u.raw; + + if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) { +#ifdef CONFIG_IWLEGACY_DEBUGFS + memset(&il->_3945.accum_stats, 0, + sizeof(struct il3945_notif_stats)); + memset(&il->_3945.delta_stats, 0, + sizeof(struct il3945_notif_stats)); + memset(&il->_3945.max_delta, 0, + sizeof(struct il3945_notif_stats)); +#endif + D_RX("Statistics have been cleared\n"); + } + il3945_hdl_stats(il, rxb); +} + +/****************************************************************************** + * + * Misc. internal state and helper functions + * + ******************************************************************************/ + +/* This is necessary only for a number of stats, see the caller. */ +static int +il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header) +{ + /* Filter incoming packets to determine if they are targeted toward + * this network, discarding packets coming from ourselves */ + switch (il->iw_mode) { + case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ + /* packets to our IBSS update information */ + return ether_addr_equal_64bits(header->addr3, il->bssid); + case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ + /* packets to our IBSS update information */ + return ether_addr_equal_64bits(header->addr2, il->bssid); + default: + return 1; + } +} + +#define SMALL_PACKET_SIZE 256 + +static void +il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb, + struct ieee80211_rx_status *stats) +{ + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt); + struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); + struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); + u32 len = le16_to_cpu(rx_hdr->len); + struct sk_buff *skb; + __le16 fc = hdr->frame_control; + u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order; + + /* We received data from the HW, so stop the watchdog */ + if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) { + D_DROP("Corruption detected!\n"); + return; + } + + /* We only process data packets if the interface is open */ + if (unlikely(!il->is_open)) { + D_DROP("Dropping packet while interface is not open.\n"); + return; + } + + if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { + il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); + D_INFO("Woke queues - frame received on passive channel\n"); + } + + skb = dev_alloc_skb(SMALL_PACKET_SIZE); + if (!skb) { + IL_ERR("dev_alloc_skb failed\n"); + return; + } + + if (!il3945_mod_params.sw_crypto) + il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt, + le32_to_cpu(rx_end->status), stats); + + /* If frame is small enough to fit into skb->head, copy it + * and do not consume a full page + */ + if (len <= SMALL_PACKET_SIZE) { + memcpy(skb_put(skb, len), rx_hdr->payload, len); + } else { + skb_add_rx_frag(skb, 0, rxb->page, + (void *)rx_hdr->payload - (void *)pkt, len, + fraglen); + il->alloc_rxb_page--; + rxb->page = NULL; + } + il_update_stats(il, false, fc, len); + memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); + + ieee80211_rx(il->hw, skb); +} + +#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) + +static void +il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) +{ + struct ieee80211_hdr *header; + struct ieee80211_rx_status rx_status = {}; + struct il_rx_pkt *pkt = rxb_addr(rxb); + struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt); + struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); + struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); + u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg); + u16 rx_stats_noise_diff __maybe_unused = + le16_to_cpu(rx_stats->noise_diff); + u8 network_packet; + + rx_status.flag = 0; + rx_status.mactime = le64_to_cpu(rx_end->timestamp); + rx_status.band = + (rx_hdr-> + phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ : + IEEE80211_BAND_5GHZ; + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel), + rx_status.band); + + rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate); + if (rx_status.band == IEEE80211_BAND_5GHZ) + rx_status.rate_idx -= IL_FIRST_OFDM_RATE; + + rx_status.antenna = + (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> + 4; + + /* set the preamble flag if appropriate */ + if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + + if ((unlikely(rx_stats->phy_count > 20))) { + D_DROP("dsp size out of range [0,20]: %d\n", + rx_stats->phy_count); + return; + } + + if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) || + !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { + D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); + return; + } + + /* Convert 3945's rssi indicator to dBm */ + rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET; + + D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal, + rx_stats_sig_avg, rx_stats_noise_diff); + + header = (struct ieee80211_hdr *)IL_RX_DATA(pkt); + + network_packet = il3945_is_network_packet(il, header); + + D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n", + network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel), + rx_status.signal, rx_status.signal, rx_status.rate_idx); + + if (network_packet) { + il->_3945.last_beacon_time = + le32_to_cpu(rx_end->beacon_timestamp); + il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp); + il->_3945.last_rx_rssi = rx_status.signal; + } + + il3945_pass_packet_to_mac80211(il, rxb, &rx_status); +} + +int +il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, + dma_addr_t addr, u16 len, u8 reset, u8 pad) +{ + int count; + struct il_queue *q; + struct il3945_tfd *tfd, *tfd_tmp; + + q = &txq->q; + tfd_tmp = (struct il3945_tfd *)txq->tfds; + tfd = &tfd_tmp[q->write_ptr]; + + if (reset) + memset(tfd, 0, sizeof(*tfd)); + + count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); + + if (count >= NUM_TFD_CHUNKS || count < 0) { + IL_ERR("Error can not send more than %d chunks\n", + NUM_TFD_CHUNKS); + return -EINVAL; + } + + tfd->tbs[count].addr = cpu_to_le32(addr); + tfd->tbs[count].len = cpu_to_le32(len); + + count++; + + tfd->control_flags = + cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad)); + + return 0; +} + +/** + * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr] + * + * Does NOT advance any idxes + */ +void +il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) +{ + struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds; + int idx = txq->q.read_ptr; + struct il3945_tfd *tfd = &tfd_tmp[idx]; + struct pci_dev *dev = il->pci_dev; + int i; + int counter; + + /* sanity check */ + counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); + if (counter > NUM_TFD_CHUNKS) { + IL_ERR("Too many chunks: %i\n", counter); + /* @todo issue fatal error, it is quite serious situation */ + return; + } + + /* Unmap tx_cmd */ + if (counter) + pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), + dma_unmap_len(&txq->meta[idx], len), + PCI_DMA_TODEVICE); + + /* unmap chunks if any */ + + for (i = 1; i < counter; i++) + pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr), + le32_to_cpu(tfd->tbs[i].len), + PCI_DMA_TODEVICE); + + /* free SKB */ + if (txq->skbs) { + struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; + + /* can be called from irqs-disabled context */ + if (skb) { + dev_kfree_skb_any(skb); + txq->skbs[txq->q.read_ptr] = NULL; + } + } +} + +/** + * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: + * +*/ +void +il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd, + struct ieee80211_tx_info *info, + struct ieee80211_hdr *hdr, int sta_id) +{ + u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value; + u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1); + u16 rate_mask; + int rate; + const u8 rts_retry_limit = 7; + u8 data_retry_limit; + __le32 tx_flags; + __le16 fc = hdr->frame_control; + struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; + + rate = il3945_rates[rate_idx].plcp; + tx_flags = tx_cmd->tx_flags; + + /* We need to figure out how to get the sta->supp_rates while + * in this running context */ + rate_mask = RATES_MASK_3945; + + /* Set retry limit on DATA packets and Probe Responses */ + if (ieee80211_is_probe_resp(fc)) + data_retry_limit = 3; + else + data_retry_limit = IL_DEFAULT_TX_RETRY; + tx_cmd->data_retry_limit = data_retry_limit; + /* Set retry limit on RTS packets */ + tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); + + tx_cmd->rate = rate; + tx_cmd->tx_flags = tx_flags; + + /* OFDM */ + tx_cmd->supp_rates[0] = + ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF; + + /* CCK */ + tx_cmd->supp_rates[1] = (rate_mask & 0xF); + + D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " + "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate, + le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1], + tx_cmd->supp_rates[0]); +} + +static u8 +il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate) +{ + unsigned long flags_spin; + struct il_station_entry *station; + + if (sta_id == IL_INVALID_STATION) + return IL_INVALID_STATION; + + spin_lock_irqsave(&il->sta_lock, flags_spin); + station = &il->stations[sta_id]; + + station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; + station->sta.rate_n_flags = cpu_to_le16(tx_rate); + station->sta.mode = STA_CONTROL_MODIFY_MSK; + il_send_add_sta(il, &station->sta, CMD_ASYNC); + spin_unlock_irqrestore(&il->sta_lock, flags_spin); + + D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate); + return sta_id; +} + +static void +il3945_set_pwr_vmain(struct il_priv *il) +{ +/* + * (for documentation purposes) + * to set power to V_AUX, do + + if (pci_pme_capable(il->pci_dev, PCI_D3cold)) { + il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + + _il_poll_bit(il, CSR_GPIO_IN, + CSR_GPIO_IN_VAL_VAUX_PWR_SRC, + CSR_GPIO_IN_BIT_AUX_POWER, 5000); + } + */ + + il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + + _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, + CSR_GPIO_IN_BIT_AUX_POWER, 5000); +} + +static int +il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq) +{ + il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma); + il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma); + il_wr(il, FH39_RCSR_WPTR(0), 0); + il_wr(il, FH39_RCSR_CONFIG(0), + FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | + FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | + FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | + FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG + << + FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) + | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 << + FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) + | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); + + /* fake read to flush all prev I/O */ + il_rd(il, FH39_RSSR_CTRL); + + return 0; +} + +static int +il3945_tx_reset(struct il_priv *il) +{ + /* bypass mode */ + il_wr_prph(il, ALM_SCD_MODE_REG, 0x2); + + /* RA 0 is active */ + il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01); + + /* all 6 fifo are active */ + il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f); + + il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000); + il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002); + il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004); + il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005); + + il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys); + + il_wr(il, FH39_TSSR_MSG_CONFIG, + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | + FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); + + return 0; +} + +/** + * il3945_txq_ctx_reset - Reset TX queue context + * + * Destroys all DMA structures and initialize them again + */ +static int +il3945_txq_ctx_reset(struct il_priv *il) +{ + int rc, txq_id; + + il3945_hw_txq_ctx_free(il); + + /* allocate tx queue structure */ + rc = il_alloc_txq_mem(il); + if (rc) + return rc; + + /* Tx CMD queue */ + rc = il3945_tx_reset(il); + if (rc) + goto error; + + /* Tx queue(s) */ + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { + rc = il_tx_queue_init(il, txq_id); + if (rc) { + IL_ERR("Tx %d queue init failed\n", txq_id); + goto error; + } + } + + return rc; + +error: + il3945_hw_txq_ctx_free(il); + return rc; +} + +/* + * Start up 3945's basic functionality after it has been reset + * (e.g. after platform boot, or shutdown via il_apm_stop()) + * NOTE: This does not load uCode nor start the embedded processor + */ +static int +il3945_apm_init(struct il_priv *il) +{ + int ret = il_apm_init(il); + + /* Clear APMG (NIC's internal power management) interrupts */ + il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0); + il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); + + /* Reset radio chip */ + il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); + udelay(5); + il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); + + return ret; +} + +static void +il3945_nic_config(struct il_priv *il) +{ + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + unsigned long flags; + u8 rev_id = il->pci_dev->revision; + + spin_lock_irqsave(&il->lock, flags); + + /* Determine HW type */ + D_INFO("HW Revision ID = 0x%X\n", rev_id); + + if (rev_id & PCI_CFG_REV_ID_BIT_RTP) + D_INFO("RTP type\n"); + else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { + D_INFO("3945 RADIO-MB type\n"); + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); + } else { + D_INFO("3945 RADIO-MM type\n"); + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); + } + + if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) { + D_INFO("SKU OP mode is mrc\n"); + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); + } else + D_INFO("SKU OP mode is basic\n"); + + if ((eeprom->board_revision & 0xF0) == 0xD0) { + D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); + } else { + D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); + il_clear_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); + } + + if (eeprom->almgor_m_version <= 1) { + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); + D_INFO("Card M type A version is 0x%X\n", + eeprom->almgor_m_version); + } else { + D_INFO("Card M type B version is 0x%X\n", + eeprom->almgor_m_version); + il_set_bit(il, CSR_HW_IF_CONFIG_REG, + CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); + } + spin_unlock_irqrestore(&il->lock, flags); + + if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) + D_RF_KILL("SW RF KILL supported in EEPROM.\n"); + + if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) + D_RF_KILL("HW RF KILL supported in EEPROM.\n"); +} + +int +il3945_hw_nic_init(struct il_priv *il) +{ + int rc; + unsigned long flags; + struct il_rx_queue *rxq = &il->rxq; + + spin_lock_irqsave(&il->lock, flags); + il3945_apm_init(il); + spin_unlock_irqrestore(&il->lock, flags); + + il3945_set_pwr_vmain(il); + il3945_nic_config(il); + + /* Allocate the RX queue, or reset if it is already allocated */ + if (!rxq->bd) { + rc = il_rx_queue_alloc(il); + if (rc) { + IL_ERR("Unable to initialize Rx queue\n"); + return -ENOMEM; + } + } else + il3945_rx_queue_reset(il, rxq); + + il3945_rx_replenish(il); + + il3945_rx_init(il, rxq); + + /* Look at using this instead: + rxq->need_update = 1; + il_rx_queue_update_write_ptr(il, rxq); + */ + + il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7); + + rc = il3945_txq_ctx_reset(il); + if (rc) + return rc; + + set_bit(S_INIT, &il->status); + + return 0; +} + +/** + * il3945_hw_txq_ctx_free - Free TXQ Context + * + * Destroy all TX DMA queues and structures + */ +void +il3945_hw_txq_ctx_free(struct il_priv *il) +{ + int txq_id; + + /* Tx queues */ + if (il->txq) + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) + if (txq_id == IL39_CMD_QUEUE_NUM) + il_cmd_queue_free(il); + else + il_tx_queue_free(il, txq_id); + + /* free tx queue structure */ + il_free_txq_mem(il); +} + +void +il3945_hw_txq_ctx_stop(struct il_priv *il) +{ + int txq_id; + + /* stop SCD */ + _il_wr_prph(il, ALM_SCD_MODE_REG, 0); + _il_wr_prph(il, ALM_SCD_TXFACT_REG, 0); + + /* reset TFD queues */ + for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { + _il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0); + _il_poll_bit(il, FH39_TSSR_TX_STATUS, + FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), + FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), + 1000); + } +} + +/** + * il3945_hw_reg_adjust_power_by_temp + * return idx delta into power gain settings table +*/ +static int +il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) +{ + return (new_reading - old_reading) * (-11) / 100; +} + +/** + * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range + */ +static inline int +il3945_hw_reg_temp_out_of_range(int temperature) +{ + return (temperature < -260 || temperature > 25) ? 1 : 0; +} + +int +il3945_hw_get_temperature(struct il_priv *il) +{ + return _il_rd(il, CSR_UCODE_DRV_GP2); +} + +/** + * il3945_hw_reg_txpower_get_temperature + * get the current temperature by reading from NIC +*/ +static int +il3945_hw_reg_txpower_get_temperature(struct il_priv *il) +{ + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + int temperature; + + temperature = il3945_hw_get_temperature(il); + + /* driver's okay range is -260 to +25. + * human readable okay range is 0 to +285 */ + D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT); + + /* handle insane temp reading */ + if (il3945_hw_reg_temp_out_of_range(temperature)) { + IL_ERR("Error bad temperature value %d\n", temperature); + + /* if really really hot(?), + * substitute the 3rd band/group's temp measured at factory */ + if (il->last_temperature > 100) + temperature = eeprom->groups[2].temperature; + else /* else use most recent "sane" value from driver */ + temperature = il->last_temperature; + } + + return temperature; /* raw, not "human readable" */ +} + +/* Adjust Txpower only if temperature variance is greater than threshold. + * + * Both are lower than older versions' 9 degrees */ +#define IL_TEMPERATURE_LIMIT_TIMER 6 + +/** + * il3945_is_temp_calib_needed - determines if new calibration is needed + * + * records new temperature in tx_mgr->temperature. + * replaces tx_mgr->last_temperature *only* if calib needed + * (assumes caller will actually do the calibration!). */ +static int +il3945_is_temp_calib_needed(struct il_priv *il) +{ + int temp_diff; + + il->temperature = il3945_hw_reg_txpower_get_temperature(il); + temp_diff = il->temperature - il->last_temperature; + + /* get absolute value */ + if (temp_diff < 0) { + D_POWER("Getting cooler, delta %d,\n", temp_diff); + temp_diff = -temp_diff; + } else if (temp_diff == 0) + D_POWER("Same temp,\n"); + else + D_POWER("Getting warmer, delta %d,\n", temp_diff); + + /* if we don't need calibration, *don't* update last_temperature */ + if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) { + D_POWER("Timed thermal calib not needed\n"); + return 0; + } + + D_POWER("Timed thermal calib needed\n"); + + /* assume that caller will actually do calib ... + * update the "last temperature" value */ + il->last_temperature = il->temperature; + return 1; +} + +#define IL_MAX_GAIN_ENTRIES 78 +#define IL_CCK_FROM_OFDM_POWER_DIFF -5 +#define IL_CCK_FROM_OFDM_IDX_DIFF (10) + +/* radio and DSP power table, each step is 1/2 dB. + * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ +static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = { + { + {251, 127}, /* 2.4 GHz, highest power */ + {251, 127}, + {251, 127}, + {251, 127}, + {251, 125}, + {251, 110}, + {251, 105}, + {251, 98}, + {187, 125}, + {187, 115}, + {187, 108}, + {187, 99}, + {243, 119}, + {243, 111}, + {243, 105}, + {243, 97}, + {243, 92}, + {211, 106}, + {211, 100}, + {179, 120}, + {179, 113}, + {179, 107}, + {147, 125}, + {147, 119}, + {147, 112}, + {147, 106}, + {147, 101}, + {147, 97}, + {147, 91}, + {115, 107}, + {235, 121}, + {235, 115}, + {235, 109}, + {203, 127}, + {203, 121}, + {203, 115}, + {203, 108}, + {203, 102}, + {203, 96}, + {203, 92}, + {171, 110}, + {171, 104}, + {171, 98}, + {139, 116}, + {227, 125}, + {227, 119}, + {227, 113}, + {227, 107}, + {227, 101}, + {227, 96}, + {195, 113}, + {195, 106}, + {195, 102}, + {195, 95}, + {163, 113}, + {163, 106}, + {163, 102}, + {163, 95}, + {131, 113}, + {131, 106}, + {131, 102}, + {131, 95}, + {99, 113}, + {99, 106}, + {99, 102}, + {99, 95}, + {67, 113}, + {67, 106}, + {67, 102}, + {67, 95}, + {35, 113}, + {35, 106}, + {35, 102}, + {35, 95}, + {3, 113}, + {3, 106}, + {3, 102}, + {3, 95} /* 2.4 GHz, lowest power */ + }, + { + {251, 127}, /* 5.x GHz, highest power */ + {251, 120}, + {251, 114}, + {219, 119}, + {219, 101}, + {187, 113}, + {187, 102}, + {155, 114}, + {155, 103}, + {123, 117}, + {123, 107}, + {123, 99}, + {123, 92}, + {91, 108}, + {59, 125}, + {59, 118}, + {59, 109}, + {59, 102}, + {59, 96}, + {59, 90}, + {27, 104}, + {27, 98}, + {27, 92}, + {115, 118}, + {115, 111}, + {115, 104}, + {83, 126}, + {83, 121}, + {83, 113}, + {83, 105}, + {83, 99}, + {51, 118}, + {51, 111}, + {51, 104}, + {51, 98}, + {19, 116}, + {19, 109}, + {19, 102}, + {19, 98}, + {19, 93}, + {171, 113}, + {171, 107}, + {171, 99}, + {139, 120}, + {139, 113}, + {139, 107}, + {139, 99}, + {107, 120}, + {107, 113}, + {107, 107}, + {107, 99}, + {75, 120}, + {75, 113}, + {75, 107}, + {75, 99}, + {43, 120}, + {43, 113}, + {43, 107}, + {43, 99}, + {11, 120}, + {11, 113}, + {11, 107}, + {11, 99}, + {131, 107}, + {131, 99}, + {99, 120}, + {99, 113}, + {99, 107}, + {99, 99}, + {67, 120}, + {67, 113}, + {67, 107}, + {67, 99}, + {35, 120}, + {35, 113}, + {35, 107}, + {35, 99}, + {3, 120} /* 5.x GHz, lowest power */ + } +}; + +static inline u8 +il3945_hw_reg_fix_power_idx(int idx) +{ + if (idx < 0) + return 0; + if (idx >= IL_MAX_GAIN_ENTRIES) + return IL_MAX_GAIN_ENTRIES - 1; + return (u8) idx; +} + +/* Kick off thermal recalibration check every 60 seconds */ +#define REG_RECALIB_PERIOD (60) + +/** + * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests + * + * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) + * or 6 Mbit (OFDM) rates. + */ +static void +il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx, + const s8 *clip_pwrs, + struct il_channel_info *ch_info, int band_idx) +{ + struct il3945_scan_power_info *scan_power_info; + s8 power; + u8 power_idx; + + scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx]; + + /* use this channel group's 6Mbit clipping/saturation pwr, + * but cap at regulatory scan power restriction (set during init + * based on eeprom channel data) for this channel. */ + power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]); + + power = min(power, il->tx_power_user_lmt); + scan_power_info->requested_power = power; + + /* find difference between new scan *power* and current "normal" + * Tx *power* for 6Mb. Use this difference (x2) to adjust the + * current "normal" temperature-compensated Tx power *idx* for + * this rate (1Mb or 6Mb) to yield new temp-compensated scan power + * *idx*. */ + power_idx = + ch_info->power_info[rate_idx].power_table_idx - (power - + ch_info-> + power_info + [RATE_6M_IDX_TBL]. + requested_power) * + 2; + + /* store reference idx that we use when adjusting *all* scan + * powers. So we can accommodate user (all channel) or spectrum + * management (single channel) power changes "between" temperature + * feedback compensation procedures. + * don't force fit this reference idx into gain table; it may be a + * negative number. This will help avoid errors when we're at + * the lower bounds (highest gains, for warmest temperatures) + * of the table. */ + + /* don't exceed table bounds for "real" setting */ + power_idx = il3945_hw_reg_fix_power_idx(power_idx); + + scan_power_info->power_table_idx = power_idx; + scan_power_info->tpc.tx_gain = + power_gain_table[band_idx][power_idx].tx_gain; + scan_power_info->tpc.dsp_atten = + power_gain_table[band_idx][power_idx].dsp_atten; +} + +/** + * il3945_send_tx_power - fill in Tx Power command with gain settings + * + * Configures power settings for all rates for the current channel, + * using values from channel info struct, and send to NIC + */ +static int +il3945_send_tx_power(struct il_priv *il) +{ + int rate_idx, i; + const struct il_channel_info *ch_info = NULL; + struct il3945_txpowertable_cmd txpower = { + .channel = il->active.channel, + }; + u16 chan; + + if (WARN_ONCE + (test_bit(S_SCAN_HW, &il->status), + "TX Power requested while scanning!\n")) + return -EAGAIN; + + chan = le16_to_cpu(il->active.channel); + + txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1; + ch_info = il_get_channel_info(il, il->band, chan); + if (!ch_info) { + IL_ERR("Failed to get channel info for channel %d [%d]\n", chan, + il->band); + return -EINVAL; + } + + if (!il_is_channel_valid(ch_info)) { + D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n"); + return 0; + } + + /* fill cmd with power settings for all rates for current channel */ + /* Fill OFDM rate */ + for (rate_idx = IL_FIRST_OFDM_RATE, i = 0; + rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) { + + txpower.power[i].tpc = ch_info->power_info[i].tpc; + txpower.power[i].rate = il3945_rates[rate_idx].plcp; + + D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", + le16_to_cpu(txpower.channel), txpower.band, + txpower.power[i].tpc.tx_gain, + txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); + } + /* Fill CCK rates */ + for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE; + rate_idx++, i++) { + txpower.power[i].tpc = ch_info->power_info[i].tpc; + txpower.power[i].rate = il3945_rates[rate_idx].plcp; + + D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", + le16_to_cpu(txpower.channel), txpower.band, + txpower.power[i].tpc.tx_gain, + txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); + } + + return il_send_cmd_pdu(il, C_TX_PWR_TBL, + sizeof(struct il3945_txpowertable_cmd), + &txpower); + +} + +/** + * il3945_hw_reg_set_new_power - Configures power tables at new levels + * @ch_info: Channel to update. Uses power_info.requested_power. + * + * Replace requested_power and base_power_idx ch_info fields for + * one channel. + * + * Called if user or spectrum management changes power preferences. + * Takes into account h/w and modulation limitations (clip power). + * + * This does *not* send anything to NIC, just sets up ch_info for one channel. + * + * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to + * properly fill out the scan powers, and actual h/w gain settings, + * and send changes to NIC + */ +static int +il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info) +{ + struct il3945_channel_power_info *power_info; + int power_changed = 0; + int i; + const s8 *clip_pwrs; + int power; + + /* Get this chnlgrp's rate-to-max/clip-powers table */ + clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers; + + /* Get this channel's rate-to-current-power settings table */ + power_info = ch_info->power_info; + + /* update OFDM Txpower settings */ + for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) { + int delta_idx; + + /* limit new power to be no more than h/w capability */ + power = min(ch_info->curr_txpow, clip_pwrs[i]); + if (power == power_info->requested_power) + continue; + + /* find difference between old and new requested powers, + * update base (non-temp-compensated) power idx */ + delta_idx = (power - power_info->requested_power) * 2; + power_info->base_power_idx -= delta_idx; + + /* save new requested power value */ + power_info->requested_power = power; + + power_changed = 1; + } + + /* update CCK Txpower settings, based on OFDM 12M setting ... + * ... all CCK power settings for a given channel are the *same*. */ + if (power_changed) { + power = + ch_info->power_info[RATE_12M_IDX_TBL].requested_power + + IL_CCK_FROM_OFDM_POWER_DIFF; + + /* do all CCK rates' il3945_channel_power_info structures */ + for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) { + power_info->requested_power = power; + power_info->base_power_idx = + ch_info->power_info[RATE_12M_IDX_TBL]. + base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; + ++power_info; + } + } + + return 0; +} + +/** + * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel + * + * NOTE: Returned power limit may be less (but not more) than requested, + * based strictly on regulatory (eeprom and spectrum mgt) limitations + * (no consideration for h/w clipping limitations). + */ +static int +il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info) +{ + s8 max_power; + +#if 0 + /* if we're using TGd limits, use lower of TGd or EEPROM */ + if (ch_info->tgd_data.max_power != 0) + max_power = + min(ch_info->tgd_data.max_power, + ch_info->eeprom.max_power_avg); + + /* else just use EEPROM limits */ + else +#endif + max_power = ch_info->eeprom.max_power_avg; + + return min(max_power, ch_info->max_power_avg); +} + +/** + * il3945_hw_reg_comp_txpower_temp - Compensate for temperature + * + * Compensate txpower settings of *all* channels for temperature. + * This only accounts for the difference between current temperature + * and the factory calibration temperatures, and bases the new settings + * on the channel's base_power_idx. + * + * If RxOn is "associated", this sends the new Txpower to NIC! + */ +static int +il3945_hw_reg_comp_txpower_temp(struct il_priv *il) +{ + struct il_channel_info *ch_info = NULL; + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + int delta_idx; + const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ + u8 a_band; + u8 rate_idx; + u8 scan_tbl_idx; + u8 i; + int ref_temp; + int temperature = il->temperature; + + if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) { + /* do not perform tx power calibration */ + return 0; + } + /* set up new Tx power info for each and every channel, 2.4 and 5.x */ + for (i = 0; i < il->channel_count; i++) { + ch_info = &il->channel_info[i]; + a_band = il_is_channel_a_band(ch_info); + + /* Get this chnlgrp's factory calibration temperature */ + ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature; + + /* get power idx adjustment based on current and factory + * temps */ + delta_idx = + il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp); + + /* set tx power value for all rates, OFDM and CCK */ + for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) { + int power_idx = + ch_info->power_info[rate_idx].base_power_idx; + + /* temperature compensate */ + power_idx += delta_idx; + + /* stay within table range */ + power_idx = il3945_hw_reg_fix_power_idx(power_idx); + ch_info->power_info[rate_idx].power_table_idx = + (u8) power_idx; + ch_info->power_info[rate_idx].tpc = + power_gain_table[a_band][power_idx]; + } + + /* Get this chnlgrp's rate-to-max/clip-powers table */ + clip_pwrs = + il->_3945.clip_groups[ch_info->group_idx].clip_powers; + + /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ + for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; + scan_tbl_idx++) { + s32 actual_idx = + (scan_tbl_idx == + 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; + il3945_hw_reg_set_scan_power(il, scan_tbl_idx, + actual_idx, clip_pwrs, + ch_info, a_band); + } + } + + /* send Txpower command for current channel to ucode */ + return il->ops->send_tx_power(il); +} + +int +il3945_hw_reg_set_txpower(struct il_priv *il, s8 power) +{ + struct il_channel_info *ch_info; + s8 max_power; + u8 a_band; + u8 i; + + if (il->tx_power_user_lmt == power) { + D_POWER("Requested Tx power same as current " "limit: %ddBm.\n", + power); + return 0; + } + + D_POWER("Setting upper limit clamp to %ddBm.\n", power); + il->tx_power_user_lmt = power; + + /* set up new Tx powers for each and every channel, 2.4 and 5.x */ + + for (i = 0; i < il->channel_count; i++) { + ch_info = &il->channel_info[i]; + a_band = il_is_channel_a_band(ch_info); + + /* find minimum power of all user and regulatory constraints + * (does not consider h/w clipping limitations) */ + max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info); + max_power = min(power, max_power); + if (max_power != ch_info->curr_txpow) { + ch_info->curr_txpow = max_power; + + /* this considers the h/w clipping limitations */ + il3945_hw_reg_set_new_power(il, ch_info); + } + } + + /* update txpower settings for all channels, + * send to NIC if associated. */ + il3945_is_temp_calib_needed(il); + il3945_hw_reg_comp_txpower_temp(il); + + return 0; +} + +static int +il3945_send_rxon_assoc(struct il_priv *il) +{ + int rc = 0; + struct il_rx_pkt *pkt; + struct il3945_rxon_assoc_cmd rxon_assoc; + struct il_host_cmd cmd = { + .id = C_RXON_ASSOC, + .len = sizeof(rxon_assoc), + .flags = CMD_WANT_SKB, + .data = &rxon_assoc, + }; + const struct il_rxon_cmd *rxon1 = &il->staging; + const struct il_rxon_cmd *rxon2 = &il->active; + + if (rxon1->flags == rxon2->flags && + rxon1->filter_flags == rxon2->filter_flags && + rxon1->cck_basic_rates == rxon2->cck_basic_rates && + rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) { + D_INFO("Using current RXON_ASSOC. Not resending.\n"); + return 0; + } + + rxon_assoc.flags = il->staging.flags; + rxon_assoc.filter_flags = il->staging.filter_flags; + rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates; + rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates; + rxon_assoc.reserved = 0; + + rc = il_send_cmd_sync(il, &cmd); + if (rc) + return rc; + + pkt = (struct il_rx_pkt *)cmd.reply_page; + if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { + IL_ERR("Bad return from C_RXON_ASSOC command\n"); + rc = -EIO; + } + + il_free_pages(il, cmd.reply_page); + + return rc; +} + +/** + * il3945_commit_rxon - commit staging_rxon to hardware + * + * The RXON command in staging_rxon is committed to the hardware and + * the active_rxon structure is updated with the new data. This + * function correctly transitions out of the RXON_ASSOC_MSK state if + * a HW tune is required based on the RXON structure changes. + */ +int +il3945_commit_rxon(struct il_priv *il) +{ + /* cast away the const for active_rxon in this function */ + struct il3945_rxon_cmd *active_rxon = (void *)&il->active; + struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging; + int rc = 0; + bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); + + if (test_bit(S_EXIT_PENDING, &il->status)) + return -EINVAL; + + if (!il_is_alive(il)) + return -1; + + /* always get timestamp with Rx frame */ + staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK; + + /* select antenna */ + staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK); + staging_rxon->flags |= il3945_get_antenna_flags(il); + + rc = il_check_rxon_cmd(il); + if (rc) { + IL_ERR("Invalid RXON configuration. Not committing.\n"); + return -EINVAL; + } + + /* If we don't need to send a full RXON, we can use + * il3945_rxon_assoc_cmd which is used to reconfigure filter + * and other flags for the current radio configuration. */ + if (!il_full_rxon_required(il)) { + rc = il_send_rxon_assoc(il); + if (rc) { + IL_ERR("Error setting RXON_ASSOC " + "configuration (%d).\n", rc); + return rc; + } + + memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); + /* + * We do not commit tx power settings while channel changing, + * do it now if tx power changed. + */ + il_set_tx_power(il, il->tx_power_next, false); + return 0; + } + + /* If we are currently associated and the new config requires + * an RXON_ASSOC and the new config wants the associated mask enabled, + * we must clear the associated from the active configuration + * before we apply the new config */ + if (il_is_associated(il) && new_assoc) { + D_INFO("Toggling associated bit on current RXON\n"); + active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; + + /* + * reserved4 and 5 could have been filled by the iwlcore code. + * Let's clear them before pushing to the 3945. + */ + active_rxon->reserved4 = 0; + active_rxon->reserved5 = 0; + rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), + &il->active); + + /* If the mask clearing failed then we set + * active_rxon back to what it was previously */ + if (rc) { + active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; + IL_ERR("Error clearing ASSOC_MSK on current " + "configuration (%d).\n", rc); + return rc; + } + il_clear_ucode_stations(il); + il_restore_stations(il); + } + + D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n" + "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"), + le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr); + + /* + * reserved4 and 5 could have been filled by the iwlcore code. + * Let's clear them before pushing to the 3945. + */ + staging_rxon->reserved4 = 0; + staging_rxon->reserved5 = 0; + + il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto); + + /* Apply the new configuration */ + rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), + staging_rxon); + if (rc) { + IL_ERR("Error setting new configuration (%d).\n", rc); + return rc; + } + + memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); + + if (!new_assoc) { + il_clear_ucode_stations(il); + il_restore_stations(il); + } + + /* If we issue a new RXON command which required a tune then we must + * send a new TXPOWER command or we won't be able to Tx any frames */ + rc = il_set_tx_power(il, il->tx_power_next, true); + if (rc) { + IL_ERR("Error setting Tx power (%d).\n", rc); + return rc; + } + + /* Init the hardware's rate fallback order based on the band */ + rc = il3945_init_hw_rate_table(il); + if (rc) { + IL_ERR("Error setting HW rate table: %02X\n", rc); + return -EIO; + } + + return 0; +} + +/** + * il3945_reg_txpower_periodic - called when time to check our temperature. + * + * -- reset periodic timer + * -- see if temp has changed enough to warrant re-calibration ... if so: + * -- correct coeffs for temp (can reset temp timer) + * -- save this temp as "last", + * -- send new set of gain settings to NIC + * NOTE: This should continue working, even when we're not associated, + * so we can keep our internal table of scan powers current. */ +void +il3945_reg_txpower_periodic(struct il_priv *il) +{ + /* This will kick in the "brute force" + * il3945_hw_reg_comp_txpower_temp() below */ + if (!il3945_is_temp_calib_needed(il)) + goto reschedule; + + /* Set up a new set of temp-adjusted TxPowers, send to NIC. + * This is based *only* on current temperature, + * ignoring any previous power measurements */ + il3945_hw_reg_comp_txpower_temp(il); + +reschedule: + queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic, + REG_RECALIB_PERIOD * HZ); +} + +static void +il3945_bg_reg_txpower_periodic(struct work_struct *work) +{ + struct il_priv *il = container_of(work, struct il_priv, + _3945.thermal_periodic.work); + + mutex_lock(&il->mutex); + if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL) + goto out; + + il3945_reg_txpower_periodic(il); +out: + mutex_unlock(&il->mutex); +} + +/** + * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel. + * + * This function is used when initializing channel-info structs. + * + * NOTE: These channel groups do *NOT* match the bands above! + * These channel groups are based on factory-tested channels; + * on A-band, EEPROM's "group frequency" entries represent the top + * channel in each group 1-4. Group 5 All B/G channels are in group 0. + */ +static u16 +il3945_hw_reg_get_ch_grp_idx(struct il_priv *il, + const struct il_channel_info *ch_info) +{ + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0]; + u8 group; + u16 group_idx = 0; /* based on factory calib frequencies */ + u8 grp_channel; + + /* Find the group idx for the channel ... don't use idx 1(?) */ + if (il_is_channel_a_band(ch_info)) { + for (group = 1; group < 5; group++) { + grp_channel = ch_grp[group].group_channel; + if (ch_info->channel <= grp_channel) { + group_idx = group; + break; + } + } + /* group 4 has a few channels *above* its factory cal freq */ + if (group == 5) + group_idx = 4; + } else + group_idx = 0; /* 2.4 GHz, group 0 */ + + D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx); + return group_idx; +} + +/** + * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx + * + * Interpolate to get nominal (i.e. at factory calibration temperature) idx + * into radio/DSP gain settings table for requested power. + */ +static int +il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power, + s32 setting_idx, s32 *new_idx) +{ + const struct il3945_eeprom_txpower_group *chnl_grp = NULL; + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + s32 idx0, idx1; + s32 power = 2 * requested_power; + s32 i; + const struct il3945_eeprom_txpower_sample *samples; + s32 gains0, gains1; + s32 res; + s32 denominator; + + chnl_grp = &eeprom->groups[setting_idx]; + samples = chnl_grp->samples; + for (i = 0; i < 5; i++) { + if (power == samples[i].power) { + *new_idx = samples[i].gain_idx; + return 0; + } + } + + if (power > samples[1].power) { + idx0 = 0; + idx1 = 1; + } else if (power > samples[2].power) { + idx0 = 1; + idx1 = 2; + } else if (power > samples[3].power) { + idx0 = 2; + idx1 = 3; + } else { + idx0 = 3; + idx1 = 4; + } + + denominator = (s32) samples[idx1].power - (s32) samples[idx0].power; + if (denominator == 0) + return -EINVAL; + gains0 = (s32) samples[idx0].gain_idx * (1 << 19); + gains1 = (s32) samples[idx1].gain_idx * (1 << 19); + res = + gains0 + (gains1 - gains0) * ((s32) power - + (s32) samples[idx0].power) / + denominator + (1 << 18); + *new_idx = res >> 19; + return 0; +} + +static void +il3945_hw_reg_init_channel_groups(struct il_priv *il) +{ + u32 i; + s32 rate_idx; + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + const struct il3945_eeprom_txpower_group *group; + + D_POWER("Initializing factory calib info from EEPROM\n"); + + for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) { + s8 *clip_pwrs; /* table of power levels for each rate */ + s8 satur_pwr; /* saturation power for each chnl group */ + group = &eeprom->groups[i]; + + /* sanity check on factory saturation power value */ + if (group->saturation_power < 40) { + IL_WARN("Error: saturation power is %d, " + "less than minimum expected 40\n", + group->saturation_power); + return; + } + + /* + * Derive requested power levels for each rate, based on + * hardware capabilities (saturation power for band). + * Basic value is 3dB down from saturation, with further + * power reductions for highest 3 data rates. These + * backoffs provide headroom for high rate modulation + * power peaks, without too much distortion (clipping). + */ + /* we'll fill in this array with h/w max power levels */ + clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers; + + /* divide factory saturation power by 2 to find -3dB level */ + satur_pwr = (s8) (group->saturation_power >> 1); + + /* fill in channel group's nominal powers for each rate */ + for (rate_idx = 0; rate_idx < RATE_COUNT_3945; + rate_idx++, clip_pwrs++) { + switch (rate_idx) { + case RATE_36M_IDX_TBL: + if (i == 0) /* B/G */ + *clip_pwrs = satur_pwr; + else /* A */ + *clip_pwrs = satur_pwr - 5; + break; + case RATE_48M_IDX_TBL: + if (i == 0) + *clip_pwrs = satur_pwr - 7; + else + *clip_pwrs = satur_pwr - 10; + break; + case RATE_54M_IDX_TBL: + if (i == 0) + *clip_pwrs = satur_pwr - 9; + else + *clip_pwrs = satur_pwr - 12; + break; + default: + *clip_pwrs = satur_pwr; + break; + } + } + } +} + +/** + * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM + * + * Second pass (during init) to set up il->channel_info + * + * Set up Tx-power settings in our channel info database for each VALID + * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values + * and current temperature. + * + * Since this is based on current temperature (at init time), these values may + * not be valid for very long, but it gives us a starting/default point, + * and allows us to active (i.e. using Tx) scan. + * + * This does *not* write values to NIC, just sets up our internal table. + */ +int +il3945_txpower_set_from_eeprom(struct il_priv *il) +{ + struct il_channel_info *ch_info = NULL; + struct il3945_channel_power_info *pwr_info; + struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; + int delta_idx; + u8 rate_idx; + u8 scan_tbl_idx; + const s8 *clip_pwrs; /* array of power levels for each rate */ + u8 gain, dsp_atten; + s8 power; + u8 pwr_idx, base_pwr_idx, a_band; + u8 i; + int temperature; + + /* save temperature reference, + * so we can determine next time to calibrate */ + temperature = il3945_hw_reg_txpower_get_temperature(il); + il->last_temperature = temperature; + + il3945_hw_reg_init_channel_groups(il); + + /* initialize Tx power info for each and every channel, 2.4 and 5.x */ + for (i = 0, ch_info = il->channel_info; i < il->channel_count; + i++, ch_info++) { + a_band = il_is_channel_a_band(ch_info); + if (!il_is_channel_valid(ch_info)) + continue; + + /* find this channel's channel group (*not* "band") idx */ + ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info); + + /* Get this chnlgrp's rate->max/clip-powers table */ + clip_pwrs = + il->_3945.clip_groups[ch_info->group_idx].clip_powers; + + /* calculate power idx *adjustment* value according to + * diff between current temperature and factory temperature */ + delta_idx = + il3945_hw_reg_adjust_power_by_temp(temperature, + eeprom->groups[ch_info-> + group_idx]. + temperature); + + D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel, + delta_idx, temperature + IL_TEMP_CONVERT); + + /* set tx power value for all OFDM rates */ + for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) { + s32 uninitialized_var(power_idx); + int rc; + + /* use channel group's clip-power table, + * but don't exceed channel's max power */ + s8 pwr = min(ch_info->max_power_avg, + clip_pwrs[rate_idx]); + + pwr_info = &ch_info->power_info[rate_idx]; + + /* get base (i.e. at factory-measured temperature) + * power table idx for this rate's power */ + rc = il3945_hw_reg_get_matched_power_idx(il, pwr, + ch_info-> + group_idx, + &power_idx); + if (rc) { + IL_ERR("Invalid power idx\n"); + return rc; + } + pwr_info->base_power_idx = (u8) power_idx; + + /* temperature compensate */ + power_idx += delta_idx; + + /* stay within range of gain table */ + power_idx = il3945_hw_reg_fix_power_idx(power_idx); + + /* fill 1 OFDM rate's il3945_channel_power_info struct */ + pwr_info->requested_power = pwr; + pwr_info->power_table_idx = (u8) power_idx; + pwr_info->tpc.tx_gain = + power_gain_table[a_band][power_idx].tx_gain; + pwr_info->tpc.dsp_atten = + power_gain_table[a_band][power_idx].dsp_atten; + } + + /* set tx power for CCK rates, based on OFDM 12 Mbit settings */ + pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL]; + power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF; + pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF; + base_pwr_idx = + pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; + + /* stay within table range */ + pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx); + gain = power_gain_table[a_band][pwr_idx].tx_gain; + dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten; + + /* fill each CCK rate's il3945_channel_power_info structure + * NOTE: All CCK-rate Txpwrs are the same for a given chnl! + * NOTE: CCK rates start at end of OFDM rates! */ + for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) { + pwr_info = + &ch_info->power_info[rate_idx + IL_OFDM_RATES]; + pwr_info->requested_power = power; + pwr_info->power_table_idx = pwr_idx; + pwr_info->base_power_idx = base_pwr_idx; + pwr_info->tpc.tx_gain = gain; + pwr_info->tpc.dsp_atten = dsp_atten; + } + + /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ + for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; + scan_tbl_idx++) { + s32 actual_idx = + (scan_tbl_idx == + 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; + il3945_hw_reg_set_scan_power(il, scan_tbl_idx, + actual_idx, clip_pwrs, + ch_info, a_band); + } + } + + return 0; +} + +int +il3945_hw_rxq_stop(struct il_priv *il) +{ + int ret; + + _il_wr(il, FH39_RCSR_CONFIG(0), 0); + ret = _il_poll_bit(il, FH39_RSSR_STATUS, + FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, + FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, + 1000); + if (ret < 0) + IL_ERR("Can't stop Rx DMA.\n"); + + return 0; +} + +int +il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) +{ + int txq_id = txq->q.id; + + struct il3945_shared *shared_data = il->_3945.shared_virt; + + shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr); + + il_wr(il, FH39_CBCC_CTRL(txq_id), 0); + il_wr(il, FH39_CBCC_BASE(txq_id), 0); + + il_wr(il, FH39_TCSR_CONFIG(txq_id), + FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | + FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | + FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | + FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | + FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); + + /* fake read to flush all prev. writes */ + _il_rd(il, FH39_TSSR_CBB_BASE); + + return 0; +} + +/* + * HCMD utils + */ +static u16 +il3945_get_hcmd_size(u8 cmd_id, u16 len) +{ + switch (cmd_id) { + case C_RXON: + return sizeof(struct il3945_rxon_cmd); + case C_POWER_TBL: + return sizeof(struct il3945_powertable_cmd); + default: + return len; + } +} + +static u16 +il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data) +{ + struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data; + addsta->mode = cmd->mode; + memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); + memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo)); + addsta->station_flags = cmd->station_flags; + addsta->station_flags_msk = cmd->station_flags_msk; + addsta->tid_disable_tx = cpu_to_le16(0); + addsta->rate_n_flags = cmd->rate_n_flags; + addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; + addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; + addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; + + return (u16) sizeof(struct il3945_addsta_cmd); +} + +static int +il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r) +{ + int ret; + u8 sta_id; + unsigned long flags; + + if (sta_id_r) + *sta_id_r = IL_INVALID_STATION; + + ret = il_add_station_common(il, addr, 0, NULL, &sta_id); + if (ret) { + IL_ERR("Unable to add station %pM\n", addr); + return ret; + } + + if (sta_id_r) + *sta_id_r = sta_id; + + spin_lock_irqsave(&il->sta_lock, flags); + il->stations[sta_id].used |= IL_STA_LOCAL; + spin_unlock_irqrestore(&il->sta_lock, flags); + + return 0; +} + +static int +il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, + bool add) +{ + struct il_vif_priv *vif_priv = (void *)vif->drv_priv; + int ret; + + if (add) { + ret = + il3945_add_bssid_station(il, vif->bss_conf.bssid, + &vif_priv->ibss_bssid_sta_id); + if (ret) + return ret; + + il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id, + (il->band == + IEEE80211_BAND_5GHZ) ? RATE_6M_PLCP : + RATE_1M_PLCP); + il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id); + + return 0; + } + + return il_remove_station(il, vif_priv->ibss_bssid_sta_id, + vif->bss_conf.bssid); +} + +/** + * il3945_init_hw_rate_table - Initialize the hardware rate fallback table + */ +int +il3945_init_hw_rate_table(struct il_priv *il) +{ + int rc, i, idx, prev_idx; + struct il3945_rate_scaling_cmd rate_cmd = { + .reserved = {0, 0, 0}, + }; + struct il3945_rate_scaling_info *table = rate_cmd.table; + + for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) { + idx = il3945_rates[i].table_rs_idx; + + table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp); + table[idx].try_cnt = il->retry_rate; + prev_idx = il3945_get_prev_ieee_rate(i); + table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx; + } + + switch (il->band) { + case IEEE80211_BAND_5GHZ: + D_RATE("Select A mode rate scale\n"); + /* If one of the following CCK rates is used, + * have it fall back to the 6M OFDM rate */ + for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) + table[i].next_rate_idx = + il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; + + /* Don't fall back to CCK rates */ + table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL; + + /* Don't drop out of OFDM rates */ + table[RATE_6M_IDX_TBL].next_rate_idx = + il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; + break; + + case IEEE80211_BAND_2GHZ: + D_RATE("Select B/G mode rate scale\n"); + /* If an OFDM rate is used, have it fall back to the + * 1M CCK rates */ + + if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && + il_is_associated(il)) { + + idx = IL_FIRST_CCK_RATE; + for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++) + table[i].next_rate_idx = + il3945_rates[idx].table_rs_idx; + + idx = RATE_11M_IDX_TBL; + /* CCK shouldn't fall back to OFDM... */ + table[idx].next_rate_idx = RATE_5M_IDX_TBL; + } + break; + + default: + WARN_ON(1); + break; + } + + /* Update the rate scaling for control frame Tx */ + rate_cmd.table_id = 0; + rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); + if (rc) + return rc; + + /* Update the rate scaling for data frame Tx */ + rate_cmd.table_id = 1; + return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); +} + +/* Called when initializing driver */ +int +il3945_hw_set_hw_params(struct il_priv *il) +{ + memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params)); + + il->_3945.shared_virt = + dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared), + &il->_3945.shared_phys, GFP_KERNEL); + if (!il->_3945.shared_virt) + return -ENOMEM; + + il->hw_params.bcast_id = IL3945_BROADCAST_ID; + + /* Assign number of Usable TX queues */ + il->hw_params.max_txq_num = il->cfg->num_of_queues; + + il->hw_params.tfd_size = sizeof(struct il3945_tfd); + il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K); + il->hw_params.max_rxq_size = RX_QUEUE_SIZE; + il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; + il->hw_params.max_stations = IL3945_STATION_COUNT; + + il->sta_key_max_num = STA_KEY_MAX_NUM; + + il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR; + il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL; + il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS; + + return 0; +} + +unsigned int +il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame, + u8 rate) +{ + struct il3945_tx_beacon_cmd *tx_beacon_cmd; + unsigned int frame_size; + + tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + frame_size = + il3945_fill_beacon_frame(il, tx_beacon_cmd->frame, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + + BUG_ON(frame_size > MAX_MPDU_SIZE); + tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); + + tx_beacon_cmd->tx.rate = rate; + tx_beacon_cmd->tx.tx_flags = + (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK); + + /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */ + tx_beacon_cmd->tx.supp_rates[0] = + (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF; + + tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF); + + return sizeof(struct il3945_tx_beacon_cmd) + frame_size; +} + +void +il3945_hw_handler_setup(struct il_priv *il) +{ + il->handlers[C_TX] = il3945_hdl_tx; + il->handlers[N_3945_RX] = il3945_hdl_rx; +} + +void +il3945_hw_setup_deferred_work(struct il_priv *il) +{ + INIT_DELAYED_WORK(&il->_3945.thermal_periodic, + il3945_bg_reg_txpower_periodic); +} + +void +il3945_hw_cancel_deferred_work(struct il_priv *il) +{ + cancel_delayed_work(&il->_3945.thermal_periodic); +} + +/* check contents of special bootstrap uCode SRAM */ +static int +il3945_verify_bsm(struct il_priv *il) +{ + __le32 *image = il->ucode_boot.v_addr; + u32 len = il->ucode_boot.len; + u32 reg; + u32 val; + + D_INFO("Begin verify bsm\n"); + + /* verify BSM SRAM contents */ + val = il_rd_prph(il, BSM_WR_DWCOUNT_REG); + for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; + reg += sizeof(u32), image++) { + val = il_rd_prph(il, reg); + if (val != le32_to_cpu(*image)) { + IL_ERR("BSM uCode verification failed at " + "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", + BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND, + len, val, le32_to_cpu(*image)); + return -EIO; + } + } + + D_INFO("BSM bootstrap uCode image OK\n"); + + return 0; +} + +/****************************************************************************** + * + * EEPROM related functions + * + ******************************************************************************/ + +/* + * Clear the OWNER_MSK, to establish driver (instead of uCode running on + * embedded controller) as EEPROM reader; each read is a series of pulses + * to/from the EEPROM chip, not a single event, so even reads could conflict + * if they weren't arbitrated by some ownership mechanism. Here, the driver + * simply claims ownership, which should be safe when this function is called + * (i.e. before loading uCode!). + */ +static int +il3945_eeprom_acquire_semaphore(struct il_priv *il) +{ + _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); + return 0; +} + +static void +il3945_eeprom_release_semaphore(struct il_priv *il) +{ + return; +} + + /** + * il3945_load_bsm - Load bootstrap instructions + * + * BSM operation: + * + * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program + * in special SRAM that does not power down during RFKILL. When powering back + * up after power-saving sleeps (or during initial uCode load), the BSM loads + * the bootstrap program into the on-board processor, and starts it. + * + * The bootstrap program loads (via DMA) instructions and data for a new + * program from host DRAM locations indicated by the host driver in the + * BSM_DRAM_* registers. Once the new program is loaded, it starts + * automatically. + * + * When initializing the NIC, the host driver points the BSM to the + * "initialize" uCode image. This uCode sets up some internal data, then + * notifies host via "initialize alive" that it is complete. + * + * The host then replaces the BSM_DRAM_* pointer values to point to the + * normal runtime uCode instructions and a backup uCode data cache buffer + * (filled initially with starting data values for the on-board processor), + * then triggers the "initialize" uCode to load and launch the runtime uCode, + * which begins normal operation. + * + * When doing a power-save shutdown, runtime uCode saves data SRAM into + * the backup data cache in DRAM before SRAM is powered down. + * + * When powering back up, the BSM loads the bootstrap program. This reloads + * the runtime uCode instructions and the backup data cache into SRAM, + * and re-launches the runtime uCode from where it left off. + */ +static int +il3945_load_bsm(struct il_priv *il) +{ + __le32 *image = il->ucode_boot.v_addr; + u32 len = il->ucode_boot.len; + dma_addr_t pinst; + dma_addr_t pdata; + u32 inst_len; + u32 data_len; + int rc; + int i; + u32 done; + u32 reg_offset; + + D_INFO("Begin load bsm\n"); + + /* make sure bootstrap program is no larger than BSM's SRAM size */ + if (len > IL39_MAX_BSM_SIZE) + return -EINVAL; + + /* Tell bootstrap uCode where to find the "Initialize" uCode + * in host DRAM ... host DRAM physical address bits 31:0 for 3945. + * NOTE: il3945_initialize_alive_start() will replace these values, + * after the "initialize" uCode has run, to point to + * runtime/protocol instructions and backup data cache. */ + pinst = il->ucode_init.p_addr; + pdata = il->ucode_init_data.p_addr; + inst_len = il->ucode_init.len; + data_len = il->ucode_init_data.len; + + il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); + il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); + il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); + il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); + + /* Fill BSM memory with bootstrap instructions */ + for (reg_offset = BSM_SRAM_LOWER_BOUND; + reg_offset < BSM_SRAM_LOWER_BOUND + len; + reg_offset += sizeof(u32), image++) + _il_wr_prph(il, reg_offset, le32_to_cpu(*image)); + + rc = il3945_verify_bsm(il); + if (rc) + return rc; + + /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ + il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0); + il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND); + il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); + + /* Load bootstrap code into instruction SRAM now, + * to prepare to load "initialize" uCode */ + il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); + + /* Wait for load of bootstrap uCode to finish */ + for (i = 0; i < 100; i++) { + done = il_rd_prph(il, BSM_WR_CTRL_REG); + if (!(done & BSM_WR_CTRL_REG_BIT_START)) + break; + udelay(10); + } + if (i < 100) + D_INFO("BSM write complete, poll %d iterations\n", i); + else { + IL_ERR("BSM write did not complete!\n"); + return -EIO; + } + + /* Enable future boot loads whenever power management unit triggers it + * (e.g. when powering back up after power-save shutdown) */ + il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); + + return 0; +} + +const struct il_ops il3945_ops = { + .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd, + .txq_free_tfd = il3945_hw_txq_free_tfd, + .txq_init = il3945_hw_tx_queue_init, + .load_ucode = il3945_load_bsm, + .dump_nic_error_log = il3945_dump_nic_error_log, + .apm_init = il3945_apm_init, + .send_tx_power = il3945_send_tx_power, + .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr, + .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore, + .eeprom_release_semaphore = il3945_eeprom_release_semaphore, + + .rxon_assoc = il3945_send_rxon_assoc, + .commit_rxon = il3945_commit_rxon, + + .get_hcmd_size = il3945_get_hcmd_size, + .build_addsta_hcmd = il3945_build_addsta_hcmd, + .request_scan = il3945_request_scan, + .post_scan = il3945_post_scan, + + .post_associate = il3945_post_associate, + .config_ap = il3945_config_ap, + .manage_ibss_station = il3945_manage_ibss_station, + + .send_led_cmd = il3945_send_led_cmd, +}; + +static struct il_cfg il3945_bg_cfg = { + .name = "3945BG", + .fw_name_pre = IL3945_FW_PRE, + .ucode_api_max = IL3945_UCODE_API_MAX, + .ucode_api_min = IL3945_UCODE_API_MIN, + .sku = IL_SKU_G, + .eeprom_ver = EEPROM_3945_EEPROM_VERSION, + .mod_params = &il3945_mod_params, + .led_mode = IL_LED_BLINK, + + .eeprom_size = IL3945_EEPROM_IMG_SIZE, + .num_of_queues = IL39_NUM_QUEUES, + .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, + .set_l0s = false, + .use_bsm = true, + .led_compensation = 64, + .wd_timeout = IL_DEF_WD_TIMEOUT, + + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_REGULATORY_BAND_NO_HT40, + EEPROM_REGULATORY_BAND_NO_HT40, + }, +}; + +static struct il_cfg il3945_abg_cfg = { + .name = "3945ABG", + .fw_name_pre = IL3945_FW_PRE, + .ucode_api_max = IL3945_UCODE_API_MAX, + .ucode_api_min = IL3945_UCODE_API_MIN, + .sku = IL_SKU_A | IL_SKU_G, + .eeprom_ver = EEPROM_3945_EEPROM_VERSION, + .mod_params = &il3945_mod_params, + .led_mode = IL_LED_BLINK, + + .eeprom_size = IL3945_EEPROM_IMG_SIZE, + .num_of_queues = IL39_NUM_QUEUES, + .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, + .set_l0s = false, + .use_bsm = true, + .led_compensation = 64, + .wd_timeout = IL_DEF_WD_TIMEOUT, + + .regulatory_bands = { + EEPROM_REGULATORY_BAND_1_CHANNELS, + EEPROM_REGULATORY_BAND_2_CHANNELS, + EEPROM_REGULATORY_BAND_3_CHANNELS, + EEPROM_REGULATORY_BAND_4_CHANNELS, + EEPROM_REGULATORY_BAND_5_CHANNELS, + EEPROM_REGULATORY_BAND_NO_HT40, + EEPROM_REGULATORY_BAND_NO_HT40, + }, +}; + +const struct pci_device_id il3945_hw_card_ids[] = { + {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)}, + {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)}, + {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)}, + {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)}, + {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)}, + {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids); |
