summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/cw1200/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/cw1200/Kconfig')
-rw-r--r--drivers/net/wireless/cw1200/Kconfig30
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/net/wireless/cw1200/Kconfig b/drivers/net/wireless/cw1200/Kconfig
new file mode 100644
index 0000000..0880742
--- /dev/null
+++ b/drivers/net/wireless/cw1200/Kconfig
@@ -0,0 +1,30 @@
+config CW1200
+ tristate "CW1200 WLAN support"
+ depends on MAC80211 && CFG80211
+ help
+ This is a driver for the ST-E CW1100 & CW1200 WLAN chipsets.
+ This option just enables the driver core, see below for
+ specific bus support.
+
+if CW1200
+
+config CW1200_WLAN_SDIO
+ tristate "Support SDIO platforms"
+ depends on CW1200 && MMC
+ help
+ Enable support for the CW1200 connected via an SDIO bus.
+ By default this driver only supports the Sagrad SG901-1091/1098 EVK
+ and similar designs that utilize a hardware reset circuit. To
+ support different CW1200 SDIO designs you will need to override
+ the default platform data by calling cw1200_sdio_set_platform_data()
+ in your board setup file.
+
+config CW1200_WLAN_SPI
+ tristate "Support SPI platforms"
+ depends on CW1200 && SPI
+ help
+ Enables support for the CW1200 connected via a SPI bus. You will
+ need to add appropriate platform data glue in your board setup
+ file.
+
+endif
OpenPOWER on IntegriCloud