diff options
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c')
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 982 |
1 files changed, 565 insertions, 417 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index ddaa9ef..13c89a0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_ids.h> #include <linux/mmc/sdio_func.h> #include <linux/mmc/card.h> #include <linux/semaphore.h> @@ -40,7 +41,7 @@ #include <brcm_hw_ids.h> #include <soc.h> #include "sdio_host.h" -#include "sdio_chip.h" +#include "chip.h" #include "nvram.h" #define DCMD_RESP_TIMEOUT 2000 /* In milli second */ @@ -112,8 +113,6 @@ struct rte_console { #define BRCMF_TXBOUND 20 /* Default for max tx frames in one scheduling */ -#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */ - #define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ #define MEMBLOCK 2048 /* Block size used for downloading @@ -156,6 +155,34 @@ struct rte_console { /* manfid tuple length, include tuple, link bytes */ #define SBSDIO_CIS_MANFID_TUPLE_LEN 6 +#define CORE_BUS_REG(base, field) \ + (base + offsetof(struct sdpcmd_regs, field)) + +/* SDIO function 1 register CHIPCLKCSR */ +/* Force ALP request to backplane */ +#define SBSDIO_FORCE_ALP 0x01 +/* Force HT request to backplane */ +#define SBSDIO_FORCE_HT 0x02 +/* Force ILP request to backplane */ +#define SBSDIO_FORCE_ILP 0x04 +/* Make ALP ready (power up xtal) */ +#define SBSDIO_ALP_AVAIL_REQ 0x08 +/* Make HT ready (power up PLL) */ +#define SBSDIO_HT_AVAIL_REQ 0x10 +/* Squelch clock requests from HW */ +#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 +/* Status: ALP is ready */ +#define SBSDIO_ALP_AVAIL 0x40 +/* Status: HT is ready */ +#define SBSDIO_HT_AVAIL 0x80 +#define SBSDIO_CSR_MASK 0x1F +#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) +#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) +#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) +#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) +#define SBSDIO_CLKAV(regval, alponly) \ + (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) + /* intstatus */ #define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */ #define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */ @@ -276,7 +303,6 @@ struct rte_console { /* Flags for SDH calls */ #define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) -#define BRCMF_IDLE_IMMEDIATE (-1) /* Enter idle immediately */ #define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change * when idle */ @@ -433,10 +459,11 @@ struct brcmf_sdio { bool alp_only; /* Don't use HT clock (ALP only) */ u8 *ctrl_frame_buf; - u32 ctrl_frame_len; + u16 ctrl_frame_len; bool ctrl_frame_stat; - spinlock_t txqlock; + spinlock_t txq_lock; /* protect bus->txq */ + struct semaphore tx_seq_lock; /* protect bus->tx_seq */ wait_queue_head_t ctrl_wait; wait_queue_head_t dcmd_resp_wait; @@ -483,16 +510,58 @@ static const uint max_roundup = 512; #define ALIGNMENT 4 -static int brcmf_sdio_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE; -module_param_named(txglomsz, brcmf_sdio_txglomsz, int, 0); -MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]"); - enum brcmf_sdio_frmtype { BRCMF_SDIO_FT_NORMAL, BRCMF_SDIO_FT_SUPER, BRCMF_SDIO_FT_SUB, }; +#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu)) + +/* SDIO Pad drive strength to select value mappings */ +struct sdiod_drive_str { + u8 strength; /* Pad Drive Strength in mA */ + u8 sel; /* Chip-specific select value */ +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */ +static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { + {32, 0x6}, + {26, 0x7}, + {22, 0x4}, + {16, 0x5}, + {12, 0x2}, + {8, 0x3}, + {4, 0x0}, + {0, 0x1} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */ +static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = { + {6, 0x7}, + {5, 0x6}, + {4, 0x5}, + {3, 0x4}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */ +static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = { + {3, 0x3}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} }; + +/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ +static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { + {16, 0x7}, + {12, 0x5}, + {8, 0x3}, + {4, 0x1} +}; + #define BCM43143_FIRMWARE_NAME "brcm/brcmfmac43143-sdio.bin" #define BCM43143_NVRAM_NAME "brcm/brcmfmac43143-sdio.txt" #define BCM43241B0_FIRMWARE_NAME "brcm/brcmfmac43241b0-sdio.bin" @@ -511,6 +580,8 @@ enum brcmf_sdio_frmtype { #define BCM43362_NVRAM_NAME "brcm/brcmfmac43362-sdio.txt" #define BCM4339_FIRMWARE_NAME "brcm/brcmfmac4339-sdio.bin" #define BCM4339_NVRAM_NAME "brcm/brcmfmac4339-sdio.txt" +#define BCM4354_FIRMWARE_NAME "brcm/brcmfmac4354-sdio.bin" +#define BCM4354_NVRAM_NAME "brcm/brcmfmac4354-sdio.txt" MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME); MODULE_FIRMWARE(BCM43143_NVRAM_NAME); @@ -530,6 +601,8 @@ MODULE_FIRMWARE(BCM43362_FIRMWARE_NAME); MODULE_FIRMWARE(BCM43362_NVRAM_NAME); MODULE_FIRMWARE(BCM4339_FIRMWARE_NAME); MODULE_FIRMWARE(BCM4339_NVRAM_NAME); +MODULE_FIRMWARE(BCM4354_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4354_NVRAM_NAME); struct brcmf_firmware_names { u32 chipid; @@ -555,7 +628,8 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = { { BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) }, { BCM43362_CHIP_ID, 0xFFFFFFFE, BRCMF_FIRMWARE_NVRAM(BCM43362) }, - { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) } + { BCM4339_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4339) }, + { BCM4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) } }; @@ -618,27 +692,24 @@ static bool data_ok(struct brcmf_sdio *bus) * Reads a register in the SDIO hardware block. This block occupies a series of * adresses on the 32 bit backplane bus. */ -static int -r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) +static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset) { - u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); + struct brcmf_core *core; int ret; - *regvar = brcmf_sdiod_regrl(bus->sdiodev, - bus->ci->c_inf[idx].base + offset, &ret); + core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret); return ret; } -static int -w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) +static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) { - u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); + struct brcmf_core *core; int ret; - brcmf_sdiod_regwl(bus->sdiodev, - bus->ci->c_inf[idx].base + reg_offset, - regval, &ret); + core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret); return ret; } @@ -650,16 +721,12 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) int err = 0; int try_cnt = 0; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(TRACE, "Enter: on=%d\n", on); wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); - if (err) { - brcmf_err("SDIO_AOS KSO write error: %d\n", err); - return err; - } if (on) { /* device WAKEUP through KSO: @@ -689,18 +756,22 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) &err); if (((rd_val & bmask) == cmp_val) && !err) break; - brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n", - try_cnt, MAX_KSO_ATTEMPTS, err); + udelay(KSO_WAIT_US); brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); } while (try_cnt++ < MAX_KSO_ATTEMPTS); + if (try_cnt > 2) + brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt, + rd_val, err); + + if (try_cnt > MAX_KSO_ATTEMPTS) + brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); + return err; } -#define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND) - #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) /* Turn backplane clock on or off */ @@ -799,7 +870,6 @@ static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok) } #endif /* defined (DEBUG) */ - bus->activity = true; } else { clkreq = 0; @@ -899,8 +969,9 @@ static int brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) { int err = 0; - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(SDIO, "request %s currently %s\n", + u8 clkcsr; + + brcmf_dbg(SDIO, "Enter: request %s currently %s\n", (sleep ? "SLEEP" : "WAKE"), (bus->sleeping ? "SLEEP" : "WAKE")); @@ -917,8 +988,20 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) atomic_read(&bus->ipend) > 0 || (!atomic_read(&bus->fcstate) && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && - data_ok(bus))) - return -EBUSY; + data_ok(bus))) { + err = -EBUSY; + goto done; + } + + clkcsr = brcmf_sdiod_regrb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if ((clkcsr & SBSDIO_CSR_MASK) == 0) { + brcmf_dbg(SDIO, "no clock, set ALP\n"); + brcmf_sdiod_regwb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_ALP_AVAIL_REQ, &err); + } err = brcmf_sdio_kso_control(bus, false); /* disable watchdog */ if (!err) @@ -935,7 +1018,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) } else { brcmf_err("error while changing bus sleep state %d\n", err); - return err; + goto done; } } @@ -947,11 +1030,92 @@ end: } else { brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); } - +done: + brcmf_dbg(SDIO, "Exit: err=%d\n", err); return err; } +#ifdef DEBUG +static inline bool brcmf_sdio_valid_shared_address(u32 addr) +{ + return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)); +} + +static int brcmf_sdio_readshared(struct brcmf_sdio *bus, + struct sdpcm_shared *sh) +{ + u32 addr; + int rv; + u32 shaddr = 0; + struct sdpcm_shared_le sh_le; + __le32 addr_le; + + shaddr = bus->ci->rambase + bus->ramsize - 4; + + /* + * Read last word in socram to determine + * address of sdpcm_shared structure + */ + sdio_claim_host(bus->sdiodev->func[1]); + brcmf_sdio_bus_sleep(bus, false, false); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); + sdio_release_host(bus->sdiodev->func[1]); + if (rv < 0) + return rv; + + addr = le32_to_cpu(addr_le); + + brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr); + + /* + * Check if addr is valid. + * NVRAM length at the end of memory should have been overwritten. + */ + if (!brcmf_sdio_valid_shared_address(addr)) { + brcmf_err("invalid sdpcm_shared address 0x%08X\n", + addr); + return -EINVAL; + } + + /* Read hndrte_shared structure */ + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, + sizeof(struct sdpcm_shared_le)); + if (rv < 0) + return rv; + + /* Endianness */ + sh->flags = le32_to_cpu(sh_le.flags); + sh->trap_addr = le32_to_cpu(sh_le.trap_addr); + sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr); + sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr); + sh->assert_line = le32_to_cpu(sh_le.assert_line); + sh->console_addr = le32_to_cpu(sh_le.console_addr); + sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr); + + if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) { + brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", + SDPCM_SHARED_VERSION, + sh->flags & SDPCM_SHARED_VERSION_MASK); + return -EPROTO; + } + + return 0; +} + +static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) +{ + struct sdpcm_shared sh; + + if (brcmf_sdio_readshared(bus, &sh) == 0) + bus->console_addr = sh.console_addr; +} +#else +static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) +{ +} +#endif /* DEBUG */ + static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) { u32 intstatus = 0; @@ -995,6 +1159,12 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) else brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n", bus->sdpcm_ver); + + /* + * Retrieve console state address now that firmware should have + * updated it. + */ + brcmf_sdio_get_console_addr(bus); } /* @@ -1083,6 +1253,28 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) bus->cur_read.len = 0; } +static void brcmf_sdio_txfail(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiodev = bus->sdiodev; + u8 i, hi, lo; + + /* On failure, abort the command and terminate the frame */ + brcmf_err("sdio error, abort command and terminate frame\n"); + bus->sdcnt.tx_sderrs++; + + brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2); + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL); + bus->sdcnt.f1regdata++; + + for (i = 0; i < 3; i++) { + hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL); + bus->sdcnt.f1regdata += 2; + if ((hi == 0) && (lo == 0)) + break; + } +} + /* return total length of buffer chain */ static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus) { @@ -1955,7 +2147,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, memcpy(pkt_pad->data, pkt->data + pkt->len - tail_chop, tail_chop); - *(u32 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; + *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; skb_trim(pkt, pkt->len - tail_chop); skb_trim(pkt_pad, tail_pad + tail_chop); __skb_queue_after(pktq, pkt, pkt_pad); @@ -2003,7 +2195,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, * already properly aligned and does not * need an sdpcm header. */ - if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG) + if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG) continue; /* align packet data pointer */ @@ -2037,10 +2229,10 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, if (BRCMF_BYTES_ON() && ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) - brcmf_dbg_hex_dump(true, pkt_next, hd_info.len, + brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len, "Tx Frame:\n"); else if (BRCMF_HDRS_ON()) - brcmf_dbg_hex_dump(true, pkt_next, + brcmf_dbg_hex_dump(true, pkt_next->data, head_pad + bus->tx_hdrlen, "Tx Header:\n"); } @@ -2067,11 +2259,11 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) u8 *hdr; u32 dat_offset; u16 tail_pad; - u32 dummy_flags, chop_len; + u16 dummy_flags, chop_len; struct sk_buff *pkt_next, *tmp, *pkt_prev; skb_queue_walk_safe(pktq, pkt_next, tmp) { - dummy_flags = *(u32 *)(pkt_next->cb); + dummy_flags = *(u16 *)(pkt_next->cb); if (dummy_flags & ALIGN_SKB_FLAG) { chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; if (chop_len) { @@ -2100,7 +2292,6 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, uint chan) { int ret; - int i; struct sk_buff *pkt_next, *tmp; brcmf_dbg(TRACE, "Enter\n"); @@ -2113,28 +2304,9 @@ static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq); bus->sdcnt.f2txdata++; - if (ret < 0) { - /* On failure, abort the command and terminate the frame */ - brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n", - ret); - bus->sdcnt.tx_sderrs++; + if (ret < 0) + brcmf_sdio_txfail(bus); - brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); - bus->sdcnt.f1regdata++; - - for (i = 0; i < 3; i++) { - u8 hi, lo; - hi = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); - bus->sdcnt.f1regdata += 2; - if ((hi == 0) && (lo == 0)) - break; - } - } sdio_release_host(bus->sdiodev->func[1]); done: @@ -2164,13 +2336,15 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) /* Send frames until the limit or some other event */ for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { pkt_num = 1; - __skb_queue_head_init(&pktq); + if (down_interruptible(&bus->tx_seq_lock)) + return cnt; if (bus->txglom) pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, - brcmf_sdio_txglomsz); + bus->sdiodev->txglomsz); pkt_num = min_t(u32, pkt_num, brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); - spin_lock_bh(&bus->txqlock); + __skb_queue_head_init(&pktq); + spin_lock_bh(&bus->txq_lock); for (i = 0; i < pkt_num; i++) { pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out); @@ -2178,15 +2352,19 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) break; __skb_queue_tail(&pktq, pkt); } - spin_unlock_bh(&bus->txqlock); - if (i == 0) + spin_unlock_bh(&bus->txq_lock); + if (i == 0) { + up(&bus->tx_seq_lock); break; + } ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); + up(&bus->tx_seq_lock); + cnt += i; /* In poll mode, need to check for other events */ - if (!bus->intr && cnt) { + if (!bus->intr) { /* Check device status, signal pending interrupt */ sdio_claim_host(bus->sdiodev->func[1]); ret = r_sdreg32(bus, &intstatus, @@ -2211,6 +2389,68 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) return cnt; } +static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len) +{ + u8 doff; + u16 pad; + uint retries = 0; + struct brcmf_sdio_hdrinfo hd_info = {0}; + int ret; + + brcmf_dbg(TRACE, "Enter\n"); + + /* Back the pointer to make room for bus header */ + frame -= bus->tx_hdrlen; + len += bus->tx_hdrlen; + + /* Add alignment padding (optional for ctl frames) */ + doff = ((unsigned long)frame % bus->head_align); + if (doff) { + frame -= doff; + len += doff; + memset(frame + bus->tx_hdrlen, 0, doff); + } + + /* Round send length to next SDIO block */ + pad = 0; + if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { + pad = bus->blocksize - (len % bus->blocksize); + if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad = 0; + } else if (len % bus->head_align) { + pad = bus->head_align - (len % bus->head_align); + } + len += pad; + + hd_info.len = len - pad; + hd_info.channel = SDPCM_CONTROL_CHANNEL; + hd_info.dat_offset = doff + bus->tx_hdrlen; + hd_info.seq_num = bus->tx_seq; + hd_info.lastfrm = true; + hd_info.tail_pad = pad; + brcmf_sdio_hdpack(bus, frame, &hd_info); + + if (bus->txglom) + brcmf_sdio_update_hwhdr(frame, len); + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), + frame, len, "Tx Frame:\n"); + brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) && + BRCMF_HDRS_ON(), + frame, min_t(u16, len, 16), "TxHdr:\n"); + + do { + ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); + + if (ret < 0) + brcmf_sdio_txfail(bus); + else + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; + } while (ret < 0 && retries++ < TXRETRIES); + + return ret; +} + static void brcmf_sdio_bus_stop(struct device *dev) { u32 local_hostintmask; @@ -2292,21 +2532,29 @@ static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) } } +static void atomic_orr(int val, atomic_t *v) +{ + int old_val; + + old_val = atomic_read(v); + while (atomic_cmpxchg(v, old_val, val | old_val) != old_val) + old_val = atomic_read(v); +} + static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) { - u8 idx; + struct brcmf_core *buscore; u32 addr; unsigned long val; - int n, ret; + int ret; - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - addr = bus->ci->c_inf[idx].base + - offsetof(struct sdpcmd_regs, intstatus); + buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus); val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret); bus->sdcnt.f1regdata++; if (ret != 0) - val = 0; + return ret; val &= bus->hostintmask; atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE)); @@ -2315,13 +2563,7 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) if (val) { brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret); bus->sdcnt.f1regdata++; - } - - if (ret) { - atomic_set(&bus->intstatus, 0); - } else if (val) { - for_each_set_bit(n, &val, 32) - set_bit(n, (unsigned long *)&bus->intstatus.counter); + atomic_orr(val, &bus->intstatus); } return ret; @@ -2331,10 +2573,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) { u32 newstatus = 0; unsigned long intstatus; - uint rxlimit = bus->rxbound; /* Rx frames to read before resched */ uint txlimit = bus->txbound; /* Tx frames to send before resched */ - uint framecnt = 0; /* Temporary counter of tx/rx frames */ - int err = 0, n; + uint framecnt; /* Temporary counter of tx/rx frames */ + int err = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -2431,70 +2672,38 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) intstatus &= ~I_HMB_FRAME_IND; /* On frame indication, read available frames */ - if (PKT_AVAILABLE() && bus->clkstate == CLK_AVAIL) { - framecnt = brcmf_sdio_readframes(bus, rxlimit); + if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) { + brcmf_sdio_readframes(bus, bus->rxbound); if (!bus->rxpending) intstatus &= ~I_HMB_FRAME_IND; - rxlimit -= min(framecnt, rxlimit); } /* Keep still-pending events for next scheduling */ - if (intstatus) { - for_each_set_bit(n, &intstatus, 32) - set_bit(n, (unsigned long *)&bus->intstatus.counter); - } + if (intstatus) + atomic_orr(intstatus, &bus->intstatus); brcmf_sdio_clrintr(bus); - if (data_ok(bus) && bus->ctrl_frame_stat && - (bus->clkstate == CLK_AVAIL)) { - int i; - - sdio_claim_host(bus->sdiodev->func[1]); - err = brcmf_sdiod_send_buf(bus->sdiodev, bus->ctrl_frame_buf, - (u32)bus->ctrl_frame_len); - - if (err < 0) { - /* On failure, abort the command and - terminate the frame */ - brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n", - err); - bus->sdcnt.tx_sderrs++; - - brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, &err); - bus->sdcnt.f1regdata++; - - for (i = 0; i < 3; i++) { - u8 hi, lo; - hi = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, - &err); - lo = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, - &err); - bus->sdcnt.f1regdata += 2; - if ((hi == 0) && (lo == 0)) - break; - } + if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && + (down_interruptible(&bus->tx_seq_lock) == 0)) { + if (data_ok(bus)) { + sdio_claim_host(bus->sdiodev->func[1]); + err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, + bus->ctrl_frame_len); + sdio_release_host(bus->sdiodev->func[1]); - } else { - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; + bus->ctrl_frame_stat = false; + brcmf_sdio_wait_event_wakeup(bus); } - sdio_release_host(bus->sdiodev->func[1]); - bus->ctrl_frame_stat = false; - brcmf_sdio_wait_event_wakeup(bus); + up(&bus->tx_seq_lock); } /* Send queued frames (limit 1 if rx may still be pending) */ - else if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && - brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit - && data_ok(bus)) { + if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit && + data_ok(bus)) { framecnt = bus->rxpending ? min(txlimit, bus->txminmax) : txlimit; - framecnt = brcmf_sdio_sendfromq(bus, framecnt); - txlimit -= framecnt; + brcmf_sdio_sendfromq(bus, framecnt); } if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) { @@ -2504,19 +2713,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus) atomic_read(&bus->ipend) > 0 || (!atomic_read(&bus->fcstate) && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && - data_ok(bus)) || PKT_AVAILABLE()) { + data_ok(bus))) { atomic_inc(&bus->dpc_tskcnt); } - - /* If we're done for now, turn off clock request. */ - if ((bus->clkstate != CLK_PENDING) - && bus->idletime == BRCMF_IDLE_IMMEDIATE) { - bus->activity = false; - brcmf_dbg(SDIO, "idle state\n"); - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, true, false); - sdio_release_host(bus->sdiodev->func[1]); - } } static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) @@ -2531,15 +2730,12 @@ static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) { int ret = -EBADE; - uint datalen, prec; + uint prec; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - ulong flags; - brcmf_dbg(TRACE, "Enter\n"); - - datalen = pkt->len; + brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len); /* Add space for the header */ skb_push(pkt, bus->tx_hdrlen); @@ -2553,7 +2749,9 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) bus->sdcnt.fcqueued++; /* Priority based enq */ - spin_lock_irqsave(&bus->txqlock, flags); + spin_lock_bh(&bus->txq_lock); + /* reset bus_flags in packet cb */ + *(u16 *)(pkt->cb) = 0; if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) { skb_pull(pkt, bus->tx_hdrlen); brcmf_err("out of bus->txq !!!\n"); @@ -2566,7 +2764,7 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) bus->txoff = true; brcmf_txflowblock(bus->sdiodev->dev, true); } - spin_unlock_irqrestore(&bus->txqlock, flags); + spin_unlock_bh(&bus->txq_lock); #ifdef DEBUG if (pktq_plen(&bus->txq, prec) > qcount[prec]) @@ -2661,110 +2859,27 @@ break2: } #endif /* DEBUG */ -static int brcmf_sdio_tx_frame(struct brcmf_sdio *bus, u8 *frame, u16 len) -{ - int i; - int ret; - - bus->ctrl_frame_stat = false; - ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); - - if (ret < 0) { - /* On failure, abort the command and terminate the frame */ - brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n", - ret); - bus->sdcnt.tx_sderrs++; - - brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2); - - brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, - SFC_WF_TERM, NULL); - bus->sdcnt.f1regdata++; - - for (i = 0; i < 3; i++) { - u8 hi, lo; - hi = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCHI, NULL); - lo = brcmf_sdiod_regrb(bus->sdiodev, - SBSDIO_FUNC1_WFRAMEBCLO, NULL); - bus->sdcnt.f1regdata += 2; - if (hi == 0 && lo == 0) - break; - } - return ret; - } - - bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; - - return ret; -} - static int brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) { - u8 *frame; - u16 len, pad; - uint retries = 0; - u8 doff = 0; - int ret = -1; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct brcmf_sdio *bus = sdiodev->bus; - struct brcmf_sdio_hdrinfo hd_info = {0}; + int ret = -1; brcmf_dbg(TRACE, "Enter\n"); - /* Back the pointer to make a room for bus header */ - frame = msg - bus->tx_hdrlen; - len = (msglen += bus->tx_hdrlen); - - /* Add alignment padding (optional for ctl frames) */ - doff = ((unsigned long)frame % bus->head_align); - if (doff) { - frame -= doff; - len += doff; - msglen += doff; - memset(frame, 0, doff + bus->tx_hdrlen); - } - /* precondition: doff < bus->head_align */ - doff += bus->tx_hdrlen; - - /* Round send length to next SDIO block */ - pad = 0; - if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { - pad = bus->blocksize - (len % bus->blocksize); - if ((pad > bus->roundup) || (pad >= bus->blocksize)) - pad = 0; - } else if (len % bus->head_align) { - pad = bus->head_align - (len % bus->head_align); - } - len += pad; - - /* precondition: IS_ALIGNED((unsigned long)frame, 2) */ - - /* Make sure backplane clock is on */ - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, false, false); - sdio_release_host(bus->sdiodev->func[1]); - - hd_info.len = (u16)msglen; - hd_info.channel = SDPCM_CONTROL_CHANNEL; - hd_info.dat_offset = doff; - hd_info.seq_num = bus->tx_seq; - hd_info.lastfrm = true; - hd_info.tail_pad = pad; - brcmf_sdio_hdpack(bus, frame, &hd_info); - - if (bus->txglom) - brcmf_sdio_update_hwhdr(frame, len); + if (down_interruptible(&bus->tx_seq_lock)) + return -EINTR; if (!data_ok(bus)) { brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n", bus->tx_max, bus->tx_seq); - bus->ctrl_frame_stat = true; + up(&bus->tx_seq_lock); /* Send from dpc */ - bus->ctrl_frame_buf = frame; - bus->ctrl_frame_len = len; + bus->ctrl_frame_buf = msg; + bus->ctrl_frame_len = msglen; + bus->ctrl_frame_stat = true; wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, @@ -2775,31 +2890,18 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) ret = 0; } else { brcmf_dbg(SDIO, "ctrl_frame_stat == true\n"); + bus->ctrl_frame_stat = false; + if (down_interruptible(&bus->tx_seq_lock)) + return -EINTR; ret = -1; } } - if (ret == -1) { - brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), - frame, len, "Tx Frame:\n"); - brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) && - BRCMF_HDRS_ON(), - frame, min_t(u16, len, 16), "TxHdr:\n"); - - do { - sdio_claim_host(bus->sdiodev->func[1]); - ret = brcmf_sdio_tx_frame(bus, frame, len); - sdio_release_host(bus->sdiodev->func[1]); - } while (ret < 0 && retries++ < TXRETRIES); - } - - if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) && - atomic_read(&bus->dpc_tskcnt) == 0) { - bus->activity = false; sdio_claim_host(bus->sdiodev->func[1]); - brcmf_dbg(INFO, "idle\n"); - brcmf_sdio_clkctl(bus, CLK_NONE, true); + brcmf_sdio_bus_sleep(bus, false, false); + ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen); sdio_release_host(bus->sdiodev->func[1]); + up(&bus->tx_seq_lock); } if (ret) @@ -2811,72 +2913,6 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) } #ifdef DEBUG -static inline bool brcmf_sdio_valid_shared_address(u32 addr) -{ - return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)); -} - -static int brcmf_sdio_readshared(struct brcmf_sdio *bus, - struct sdpcm_shared *sh) -{ - u32 addr; - int rv; - u32 shaddr = 0; - struct sdpcm_shared_le sh_le; - __le32 addr_le; - - shaddr = bus->ci->rambase + bus->ramsize - 4; - - /* - * Read last word in socram to determine - * address of sdpcm_shared structure - */ - sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdio_bus_sleep(bus, false, false); - rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, (u8 *)&addr_le, 4); - sdio_release_host(bus->sdiodev->func[1]); - if (rv < 0) - return rv; - - addr = le32_to_cpu(addr_le); - - brcmf_dbg(SDIO, "sdpcm_shared address 0x%08X\n", addr); - - /* - * Check if addr is valid. - * NVRAM length at the end of memory should have been overwritten. - */ - if (!brcmf_sdio_valid_shared_address(addr)) { - brcmf_err("invalid sdpcm_shared address 0x%08X\n", - addr); - return -EINVAL; - } - - /* Read hndrte_shared structure */ - rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, - sizeof(struct sdpcm_shared_le)); - if (rv < 0) - return rv; - - /* Endianness */ - sh->flags = le32_to_cpu(sh_le.flags); - sh->trap_addr = le32_to_cpu(sh_le.trap_addr); - sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr); - sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr); - sh->assert_line = le32_to_cpu(sh_le.assert_line); - sh->console_addr = le32_to_cpu(sh_le.console_addr); - sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr); - - if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) { - brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", - SDPCM_SHARED_VERSION, - sh->flags & SDPCM_SHARED_VERSION_MASK); - return -EPROTO; - } - - return 0; -} - static int brcmf_sdio_dump_console(struct brcmf_sdio *bus, struct sdpcm_shared *sh, char __user *data, size_t count) @@ -3106,6 +3142,8 @@ static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus) debugfs_create_file("forensics", S_IRUGO, dentry, bus, &brcmf_sdio_forensic_ops); brcmf_debugfs_create_sdio_count(drvr, &bus->sdcnt); + debugfs_create_u32("console_interval", 0644, dentry, + &bus->console_interval); } #else static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) @@ -3224,32 +3262,17 @@ static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus, const struct firmware *fw) { int err; - int offset; - int address; - int len; brcmf_dbg(TRACE, "Enter\n"); - err = 0; - offset = 0; - address = bus->ci->rambase; - while (offset < fw->size) { - len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK : - fw->size - offset; - err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, - (u8 *)&fw->data[offset], len); - if (err) { - brcmf_err("error %d on writing %d membytes at 0x%08x\n", - err, len, address); - return err; - } - offset += len; - address += len; - } - if (!err) - if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, - (u8 *)fw->data, fw->size)) - err = -EIO; + err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase, + (u8 *)fw->data, fw->size); + if (err) + brcmf_err("error %d on writing %d membytes at 0x%08x\n", + err, (int)fw->size, bus->ci->rambase); + else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, + (u8 *)fw->data, fw->size)) + err = -EIO; return err; } @@ -3292,7 +3315,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) brcmf_sdio_clkctl(bus, CLK_AVAIL, false); /* Keep arm in reset */ - brcmf_sdio_chip_enter_download(bus->sdiodev, bus->ci); + brcmf_chip_enter_download(bus->ci); fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN); if (fw == NULL) { @@ -3324,7 +3347,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus) } /* Take arm out of reset */ - if (!brcmf_sdio_chip_exit_download(bus->sdiodev, bus->ci, rstvec)) { + if (!brcmf_chip_exit_download(bus->ci, rstvec)) { brcmf_err("error getting out of ARM core reset\n"); goto err; } @@ -3339,40 +3362,6 @@ err: return bcmerror; } -static bool brcmf_sdio_sr_capable(struct brcmf_sdio *bus) -{ - u32 addr, reg, pmu_cc3_mask = ~0; - int err; - - brcmf_dbg(TRACE, "Enter\n"); - - /* old chips with PMU version less than 17 don't support save restore */ - if (bus->ci->pmurev < 17) - return false; - - switch (bus->ci->chip) { - case BCM43241_CHIP_ID: - case BCM4335_CHIP_ID: - case BCM4339_CHIP_ID: - /* read PMU chipcontrol register 3 */ - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); - brcmf_sdiod_regwl(bus->sdiodev, addr, 3, NULL); - addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); - reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); - return (reg & pmu_cc3_mask) != 0; - default: - addr = CORE_CC_REG(bus->ci->c_inf[0].base, pmucapabilities_ext); - reg = brcmf_sdiod_regrl(bus->sdiodev, addr, &err); - if ((reg & PCAPEXT_SR_SUPPORTED_MASK) == 0) - return false; - - addr = CORE_CC_REG(bus->ci->c_inf[0].base, retention_ctl); - reg = brcmf_sdiod_regrl(bus->sdiodev, addr, NULL); - return (reg & (PMU_RCTL_MACPHY_DISABLE_MASK | - PMU_RCTL_LOGIC_DISABLE_MASK)) == 0; - } -} - static void brcmf_sdio_sr_init(struct brcmf_sdio *bus) { int err = 0; @@ -3424,7 +3413,7 @@ static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); /* KSO bit added in SDIO core rev 12 */ - if (bus->ci->c_inf[1].rev < 12) + if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) return 0; val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); @@ -3455,15 +3444,13 @@ static int brcmf_sdio_bus_preinit(struct device *dev) struct brcmf_sdio *bus = sdiodev->bus; uint pad_size; u32 value; - u8 idx; int err; /* the commands below use the terms tx and rx from * a device perspective, ie. bus:txglom affects the * bus transfers from device to host. */ - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV); - if (bus->ci->c_inf[idx].rev < 12) { + if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) { /* for sdio core rev < 12, disable txgloming */ value = 0; err = brcmf_iovar_data_set(dev, "bus:txglom", &value, @@ -3570,7 +3557,7 @@ static int brcmf_sdio_bus_init(struct device *dev) ret = -ENODEV; } - if (brcmf_sdio_sr_capable(bus)) { + if (brcmf_chip_sr_capable(bus->ci)) { brcmf_sdio_sr_init(bus); } else { /* Restore previous clock setting */ @@ -3714,11 +3701,175 @@ static void brcmf_sdio_dataworker(struct work_struct *work) datawork); while (atomic_read(&bus->dpc_tskcnt)) { + atomic_set(&bus->dpc_tskcnt, 0); brcmf_sdio_dpc(bus); - atomic_dec(&bus->dpc_tskcnt); } } +static void +brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, + struct brcmf_chip *ci, u32 drivestrength) +{ + const struct sdiod_drive_str *str_tab = NULL; + u32 str_mask; + u32 str_shift; + u32 base; + u32 i; + u32 drivestrength_sel = 0; + u32 cc_data_temp; + u32 addr; + + if (!(ci->cc_caps & CC_CAP_PMU)) + return; + + switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) { + case SDIOD_DRVSTR_KEY(BCM4330_CHIP_ID, 12): + str_tab = sdiod_drvstr_tab1_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; + case SDIOD_DRVSTR_KEY(BCM4334_CHIP_ID, 17): + str_tab = sdiod_drvstr_tab6_1v8; + str_mask = 0x00001800; + str_shift = 11; + break; + case SDIOD_DRVSTR_KEY(BCM43143_CHIP_ID, 17): + /* note: 43143 does not support tristate */ + i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; + if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) { + str_tab = sdiod_drvstr_tab2_3v3; + str_mask = 0x00000007; + str_shift = 0; + } else + brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", + ci->name, drivestrength); + break; + case SDIOD_DRVSTR_KEY(BCM43362_CHIP_ID, 13): + str_tab = sdiod_drive_strength_tab5_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; + default: + brcmf_err("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n", + ci->name, ci->chiprev, ci->pmurev); + break; + } + + if (str_tab != NULL) { + for (i = 0; str_tab[i].strength != 0; i++) { + if (drivestrength >= str_tab[i].strength) { + drivestrength_sel = str_tab[i].sel; + break; + } + } + base = brcmf_chip_get_chipcommon(ci)->base; + addr = CORE_CC_REG(base, chipcontrol_addr); + brcmf_sdiod_regwl(sdiodev, addr, 1, NULL); + cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL); + cc_data_temp &= ~str_mask; + drivestrength_sel <<= str_shift; + cc_data_temp |= drivestrength_sel; + brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL); + + brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", + str_tab[i].strength, drivestrength, cc_data_temp); + } +} + +static int brcmf_sdio_buscoreprep(void *ctx) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + int err = 0; + u8 clkval, clkset; + + /* Try forcing SDIO core to do ALPAvail request only */ + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + if (err) { + brcmf_err("error writing for HT off\n"); + return err; + } + + /* If register supported, wait for ALPAvail and then force ALP */ + /* This may take up to 15 milliseconds */ + clkval = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL); + + if ((clkval & ~SBSDIO_AVBITS) != clkset) { + brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", + clkset, clkval); + return -EACCES; + } + + SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, NULL)), + !SBSDIO_ALPAV(clkval)), + PMU_MAX_TRANSITION_DLY); + if (!SBSDIO_ALPAV(clkval)) { + brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", + clkval); + return -EBUSY; + } + + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + udelay(65); + + /* Also, disable the extra SDIO pull-ups */ + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + + return 0; +} + +static void brcmf_sdio_buscore_exitdl(void *ctx, struct brcmf_chip *chip, + u32 rstvec) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + struct brcmf_core *core; + u32 reg_addr; + + /* clear all interrupts */ + core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV); + reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus); + brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + + if (rstvec) + /* Write reset vector to address 0 */ + brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec, + sizeof(rstvec)); +} + +static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + u32 val, rev; + + val = brcmf_sdiod_regrl(sdiodev, addr, NULL); + if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 && + addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) { + rev = (val & CID_REV_MASK) >> CID_REV_SHIFT; + if (rev >= 2) { + val &= ~CID_ID_MASK; + val |= BCM4339_CHIP_ID; + } + } + return val; +} + +static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + + brcmf_sdiod_regwl(sdiodev, addr, val, NULL); +} + +static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { + .prepare = brcmf_sdio_buscoreprep, + .exit_dl = brcmf_sdio_buscore_exitdl, + .read32 = brcmf_sdio_buscore_read32, + .write32 = brcmf_sdio_buscore_write32, +}; + static bool brcmf_sdio_probe_attach(struct brcmf_sdio *bus) { @@ -3734,7 +3885,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); /* - * Force PLL off until brcmf_sdio_chip_attach() + * Force PLL off until brcmf_chip_attach() * programs PLL control regs */ @@ -3755,8 +3906,10 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) */ brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN); - if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci)) { - brcmf_err("brcmf_sdio_chip_attach failed!\n"); + bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops); + if (IS_ERR(bus->ci)) { + brcmf_err("brcmf_chip_attach failed!\n"); + bus->ci = NULL; goto fail; } @@ -3769,7 +3922,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) drivestrength = bus->sdiodev->pdata->drive_strength; else drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; - brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); + brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); /* Get info on the SOCRAM cores... */ bus->ramsize = bus->ci->ramsize; @@ -3792,24 +3945,18 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus) goto fail; /* set PMUControl so a backplane reset does PMU state reload */ - reg_addr = CORE_CC_REG(bus->ci->c_inf[0].base, + reg_addr = CORE_CC_REG(brcmf_chip_get_chipcommon(bus->ci)->base, pmucontrol); - reg_val = brcmf_sdiod_regrl(bus->sdiodev, - reg_addr, - &err); + reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err); if (err) goto fail; reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); - brcmf_sdiod_regwl(bus->sdiodev, - reg_addr, - reg_val, - &err); + brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err); if (err) goto fail; - sdio_release_host(bus->sdiodev->func[1]); brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); @@ -3849,6 +3996,7 @@ brcmf_sdio_watchdog_thread(void *data) brcmf_sdio_bus_watchdog(bus); /* Count the tick for reference */ bus->sdcnt.tickcnt++; + reinit_completion(&bus->watchdog_wait); } else break; } @@ -3925,7 +4073,8 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) } spin_lock_init(&bus->rxctl_lock); - spin_lock_init(&bus->txqlock); + spin_lock_init(&bus->txq_lock); + sema_init(&bus->tx_seq_lock, 1); init_waitqueue_head(&bus->ctrl_wait); init_waitqueue_head(&bus->dcmd_resp_wait); @@ -4024,14 +4173,14 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) /* De-register interrupt handler */ brcmf_sdiod_intr_unregister(bus->sdiodev); - cancel_work_sync(&bus->datawork); - if (bus->brcmf_wq) - destroy_workqueue(bus->brcmf_wq); - if (bus->sdiodev->bus_if->drvr) { brcmf_detach(bus->sdiodev->dev); } + cancel_work_sync(&bus->datawork); + if (bus->brcmf_wq) + destroy_workqueue(bus->brcmf_wq); + if (bus->ci) { if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { sdio_claim_host(bus->sdiodev->func[1]); @@ -4042,12 +4191,11 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) * all necessary cores. */ msleep(20); - brcmf_sdio_chip_enter_download(bus->sdiodev, - bus->ci); + brcmf_chip_enter_download(bus->ci); brcmf_sdio_clkctl(bus, CLK_NONE, false); sdio_release_host(bus->sdiodev->func[1]); } - brcmf_sdio_chip_detach(&bus->ci); + brcmf_chip_detach(bus->ci); } kfree(bus->rxbuf); |