summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c')
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c107
1 files changed, 70 insertions, 37 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index fa35b23..a16e644 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -43,7 +43,6 @@
#include "dhd_bus.h"
#include "dhd_dbg.h"
#include "sdio_host.h"
-#include "sdio_chip.h"
#define SDIOH_API_ACCESS_RETRY_LIMIT 2
@@ -54,6 +53,12 @@
/* Maximum milliseconds to wait for F2 to come up */
#define SDIO_WAIT_F2RDY 3000
+#define BRCMF_DEFAULT_TXGLOM_SIZE 32 /* max tx frames in glom chain */
+#define BRCMF_DEFAULT_RXGLOM_SIZE 32 /* max rx frames in glom chain */
+
+static int brcmf_sdiod_txglomsz = BRCMF_DEFAULT_TXGLOM_SIZE;
+module_param_named(txglomsz, brcmf_sdiod_txglomsz, int, 0);
+MODULE_PARM_DESC(txglomsz, "maximum tx packet chain size [SDIO]");
static irqreturn_t brcmf_sdiod_oob_irqhandler(int irq, void *dev_id)
{
@@ -264,26 +269,17 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
break;
}
- if (ret) {
- /*
- * SleepCSR register access can fail when
- * waking up the device so reduce this noise
- * in the logs.
- */
- if (addr != SBSDIO_FUNC1_SLEEPCSR)
- brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
- write ? "write" : "read", fn, addr, ret);
- else
- brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
- write ? "write" : "read", fn, addr, ret);
- }
+ if (ret)
+ brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
+ write ? "write" : "read", fn, addr, ret);
+
return ret;
}
static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
u8 regsz, void *data, bool write)
{
- u8 func_num;
+ u8 func;
s32 retry = 0;
int ret;
@@ -297,9 +293,9 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
* The rest: function 1 silicon backplane core registers
*/
if ((addr & ~REG_F0_REG_MASK) == 0)
- func_num = SDIO_FUNC_0;
+ func = SDIO_FUNC_0;
else
- func_num = SDIO_FUNC_1;
+ func = SDIO_FUNC_1;
do {
if (!write)
@@ -307,16 +303,26 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
/* for retry wait for 1 ms till bus get settled down */
if (retry)
usleep_range(1000, 2000);
- ret = brcmf_sdiod_request_data(sdiodev, func_num, addr, regsz,
+ ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz,
data, write);
} while (ret != 0 && ret != -ENOMEDIUM &&
retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
if (ret == -ENOMEDIUM)
brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
- else if (ret != 0)
- brcmf_err("failed with %d\n", ret);
-
+ else if (ret != 0) {
+ /*
+ * SleepCSR register access can fail when
+ * waking up the device so reduce this noise
+ * in the logs.
+ */
+ if (addr != SBSDIO_FUNC1_SLEEPCSR)
+ brcmf_err("failed to %s data F%d@0x%05x, err: %d\n",
+ write ? "write" : "read", func, addr, ret);
+ else
+ brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n",
+ write ? "write" : "read", func, addr, ret);
+ }
return ret;
}
@@ -488,7 +494,6 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
struct mmc_request mmc_req;
struct mmc_command mmc_cmd;
struct mmc_data mmc_dat;
- struct sg_table st;
struct scatterlist *sgl;
int ret = 0;
@@ -533,16 +538,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
pkt_offset = 0;
pkt_next = target_list->next;
- if (sg_alloc_table(&st, max_seg_cnt, GFP_KERNEL)) {
- ret = -ENOMEM;
- goto exit;
- }
-
memset(&mmc_req, 0, sizeof(struct mmc_request));
memset(&mmc_cmd, 0, sizeof(struct mmc_command));
memset(&mmc_dat, 0, sizeof(struct mmc_data));
- mmc_dat.sg = st.sgl;
+ mmc_dat.sg = sdiodev->sgtable.sgl;
mmc_dat.blksz = func_blk_sz;
mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
mmc_cmd.opcode = SD_IO_RW_EXTENDED;
@@ -558,7 +558,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
while (seg_sz) {
req_sz = 0;
sg_cnt = 0;
- sgl = st.sgl;
+ sgl = sdiodev->sgtable.sgl;
/* prep sg table */
while (pkt_next != (struct sk_buff *)target_list) {
pkt_data = pkt_next->data + pkt_offset;
@@ -640,7 +640,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
}
exit:
- sg_free_table(&st);
+ sg_init_table(sdiodev->sgtable.sgl, sdiodev->sgtable.orig_nents);
while ((pkt_next = __skb_dequeue(&local_list)) != NULL)
brcmu_pkt_buf_free_skb(pkt_next);
@@ -827,7 +827,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
}
if (!write)
memcpy(data, pkt->data, dsize);
- skb_trim(pkt, dsize);
+ skb_trim(pkt, 0);
/* Adjust for next transfer (if any) */
size -= dsize;
@@ -864,6 +864,29 @@ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
return 0;
}
+static void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev)
+{
+ uint nents;
+ int err;
+
+ if (!sdiodev->sg_support)
+ return;
+
+ nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE, brcmf_sdiod_txglomsz);
+ nents += (nents >> 4) + 1;
+
+ WARN_ON(nents > sdiodev->max_segment_count);
+
+ brcmf_dbg(TRACE, "nents=%d\n", nents);
+ err = sg_alloc_table(&sdiodev->sgtable, nents, GFP_KERNEL);
+ if (err < 0) {
+ brcmf_err("allocation failed: disable scatter-gather");
+ sdiodev->sg_support = false;
+ }
+
+ sdiodev->txglomsz = brcmf_sdiod_txglomsz;
+}
+
static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
{
if (sdiodev->bus) {
@@ -881,6 +904,7 @@ static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
sdio_disable_func(sdiodev->func[1]);
sdio_release_host(sdiodev->func[1]);
+ sg_free_table(&sdiodev->sgtable);
sdiodev->sbwad = 0;
return 0;
@@ -936,6 +960,11 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
SG_MAX_SINGLE_ALLOC);
sdiodev->max_segment_size = host->max_seg_size;
+ /* allocate scatter-gather table. sg support
+ * will be disabled upon allocation failure.
+ */
+ brcmf_sdiod_sgtable_alloc(sdiodev);
+
/* try to attach to the target device */
sdiodev->bus = brcmf_sdio_probe(sdiodev);
if (!sdiodev->bus) {
@@ -960,6 +989,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_43362)},
{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM,
SDIO_DEVICE_ID_BROADCOM_4335_4339)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4354)},
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
@@ -1073,9 +1103,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
int ret = 0;
- brcmf_dbg(SDIO, "\n");
-
- atomic_set(&sdiodev->suspend, true);
+ brcmf_dbg(SDIO, "Enter\n");
sdio_flags = sdio_get_host_pm_caps(sdiodev->func[1]);
if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
@@ -1083,9 +1111,12 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
return -EINVAL;
}
+ atomic_set(&sdiodev->suspend, true);
+
ret = sdio_set_host_pm_flags(sdiodev->func[1], MMC_PM_KEEP_POWER);
if (ret) {
brcmf_err("Failed to set pm_flags\n");
+ atomic_set(&sdiodev->suspend, false);
return ret;
}
@@ -1099,6 +1130,7 @@ static int brcmf_ops_sdio_resume(struct device *dev)
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+ brcmf_dbg(SDIO, "Enter\n");
brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
atomic_set(&sdiodev->suspend, false);
return 0;
@@ -1115,14 +1147,15 @@ static struct sdio_driver brcmf_sdmmc_driver = {
.remove = brcmf_ops_sdio_remove,
.name = BRCMFMAC_SDIO_PDATA_NAME,
.id_table = brcmf_sdmmc_ids,
-#ifdef CONFIG_PM_SLEEP
.drv = {
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM_SLEEP
.pm = &brcmf_sdio_pm_ops,
- },
#endif /* CONFIG_PM_SLEEP */
+ },
};
-static int brcmf_sdio_pd_probe(struct platform_device *pdev)
+static int __init brcmf_sdio_pd_probe(struct platform_device *pdev)
{
brcmf_dbg(SDIO, "Enter\n");
OpenPOWER on IntegriCloud