summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/atmel_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/atmel_cs.c')
-rw-r--r--drivers/net/wireless/atmel_cs.c51
1 files changed, 17 insertions, 34 deletions
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ddaa859..3240791 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -55,22 +55,6 @@
#include "atmel.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -155,11 +139,10 @@ static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "atmel_attach()\n");
+ dev_dbg(&p_dev->dev, "atmel_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
p_dev->irq.Handler = NULL;
/*
@@ -194,7 +177,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
static void atmel_detach(struct pcmcia_device *link)
{
- DEBUG(0, "atmel_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_detach\n");
atmel_release(link);
@@ -209,9 +192,6 @@ static void atmel_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -275,13 +255,13 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
static int atmel_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int last_fn, last_ret;
+ int ret;
struct pcmcia_device_id *did;
dev = link->priv;
- did = dev_get_drvdata(&handle_to_dev(link));
+ did = dev_get_drvdata(&link->dev);
- DEBUG(0, "atmel_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_config\n");
/*
In this loop, we scan the CIS for configuration table entries,
@@ -303,31 +283,36 @@ static int atmel_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
"atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
- goto cs_failed;
+ goto failed;
}
((local_info_t*)link->priv)->eth_dev =
init_atmel_card(link->irq.AssignedIRQ,
link->io.BasePort1,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
- &handle_to_dev(link),
+ &link->dev,
card_present,
link);
if (!((local_info_t*)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
@@ -340,8 +325,6 @@ static int atmel_config(struct pcmcia_device *link)
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
atmel_release(link);
return -ENODEV;
@@ -359,7 +342,7 @@ static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
- DEBUG(0, "atmel_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_release\n");
if (dev)
stop_atmel_card(dev);
OpenPOWER on IntegriCloud