summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath')
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c11
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c18
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c7
4 files changed, 32 insertions, 6 deletions
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 55f7de0..ea04515 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -538,6 +538,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
sc->iobase = mem; /* So we can unmap it on detach */
sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
sc->opmode = NL80211_IFTYPE_STATION;
+ sc->bintval = 1000;
mutex_init(&sc->lock);
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
@@ -686,6 +687,13 @@ ath5k_pci_resume(struct pci_dev *pdev)
if (err)
return err;
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (err) {
ATH5K_ERR(sc, "request_irq failed\n");
@@ -2748,9 +2756,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
goto end;
}
- /* Set to a reasonable value. Note that this will
- * be set to mac80211's value at ath5k_config(). */
- sc->bintval = 1000;
ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
ret = 0;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9f49a32..66a6c1f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1196,8 +1196,8 @@ void ath_radio_disable(struct ath_softc *sc)
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, 1);
- ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
ath9k_ps_restore(sc);
+ ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
/*******************/
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index ccdf20a..170c5b3 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -87,6 +87,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct ath_softc *sc;
struct ieee80211_hw *hw;
u8 csz;
+ u32 val;
int ret = 0;
struct ath_hw *ah;
@@ -133,6 +134,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
ret = pci_request_region(pdev, 0, "ath9k");
if (ret) {
dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -239,12 +248,21 @@ static int ath_pci_resume(struct pci_dev *pdev)
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ u32 val;
int err;
err = pci_enable_device(pdev);
if (err)
return err;
pci_restore_state(pdev);
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
/* Enable LED */
ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index f99f3a7..cece1c4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -539,11 +539,14 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
if (ath_beacon_dtim_pending_cab(skb)) {
/*
* Remain awake waiting for buffered broadcast/multicast
- * frames.
+ * frames. If the last broadcast/multicast frame is not
+ * received properly, the next beacon frame will work as
+ * a backup trigger for returning into NETWORK SLEEP state,
+ * so we are waiting for it as well.
*/
DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
"buffered broadcast/multicast frame(s)\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+ sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
return;
}
OpenPOWER on IntegriCloud