1 files changed, 189 insertions, 360 deletions

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index f05f584..f830fe1 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -21,8 +21,6 @@
 
 #define ATH_PCI_VERSION "0.1"
 
-#define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR	13
-
 static char *dev_info = "ath9k";
 
 MODULE_AUTHOR("Atheros Communications");
@@ -39,6 +37,8 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = {
 	{ 0 }
 };
 
+static void ath_detach(struct ath_softc *sc);
+
 static int ath_get_channel(struct ath_softc *sc,
 			   struct ieee80211_channel *chan)
 {
@@ -61,24 +61,24 @@ static u32 ath_get_extchanmode(struct ath_softc *sc,
 
 	switch (chan->band) {
 	case IEEE80211_BAND_2GHZ:
-		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+		if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) &&
 		    (tx_chan_width == ATH9K_HT_MACMODE_20))
 			chanmode = CHANNEL_G_HT20;
-		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+		if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) &&
 		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
 			chanmode = CHANNEL_G_HT40PLUS;
-		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+		if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) &&
 		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
 			chanmode = CHANNEL_G_HT40MINUS;
 		break;
 	case IEEE80211_BAND_5GHZ:
-		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+		if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) &&
 		    (tx_chan_width == ATH9K_HT_MACMODE_20))
 			chanmode = CHANNEL_A_HT20;
-		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+		if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) &&
 		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
 			chanmode = CHANNEL_A_HT40PLUS;
-		if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+		if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) &&
 		    (tx_chan_width == ATH9K_HT_MACMODE_2040))
 			chanmode = CHANNEL_A_HT40MINUS;
 		break;
@@ -164,7 +164,7 @@ static int ath_key_config(struct ath_softc *sc,
 	if (!sc->sc_vaps[0])
 		return -EIO;
 
-	vif = sc->sc_vaps[0]->av_if_data;
+	vif = sc->sc_vaps[0];
 	opmode = vif->type;
 
 	/*
@@ -215,24 +215,24 @@ static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
 	ath_key_reset(sc, key->keyidx, freeslot);
 }
 
-static void setup_ht_cap(struct ieee80211_ht_info *ht_info)
+static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
 {
 #define	ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3	/* 2 ^ 16 */
 #define	ATH9K_HT_CAP_MPDUDENSITY_8 0x6		/* 8 usec */
 
-	ht_info->ht_supported = 1;
-	ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH
-			|(u16)IEEE80211_HT_CAP_SM_PS
-			|(u16)IEEE80211_HT_CAP_SGI_40
-			|(u16)IEEE80211_HT_CAP_DSSSCCK40;
+	ht_info->ht_supported = true;
+	ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+		       IEEE80211_HT_CAP_SM_PS |
+		       IEEE80211_HT_CAP_SGI_40 |
+		       IEEE80211_HT_CAP_DSSSCCK40;
 
 	ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
 	ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
-	/* setup supported mcs set */
-	memset(ht_info->supp_mcs_set, 0, 16);
-	ht_info->supp_mcs_set[0] = 0xff;
-	ht_info->supp_mcs_set[1] = 0xff;
-	ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
+	/* set up supported mcs set */
+	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+	ht_info->mcs.rx_mask[0] = 0xff;
+	ht_info->mcs.rx_mask[1] = 0xff;
+	ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 }
 
 static int ath_rate2idx(struct ath_softc *sc, int rate)
@@ -279,8 +279,15 @@ static void ath9k_rx_prepare(struct ath_softc *sc,
 	rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100));
 	rx_status->antenna = status->antenna;
 
-	/* XXX Fix me, 64 cannot be the max rssi value, rigure it out */
-	rx_status->qual = status->rssi * 100 / 64;
+	/* at 45 you will be able to use MCS 15 reliably. A more elaborate
+	 * scheme can be used here but it requires tables of SNR/throughput for
+	 * each possible mode used. */
+	rx_status->qual = status->rssi * 100 / 45;
+
+	/* rssi can be more than 45 though, anything above that
+	 * should be considered at 100% */
+	if (rx_status->qual > 100)
+		rx_status->qual = 100;
 
 	if (status->flags & ATH_RX_MIC_ERROR)
 		rx_status->flag |= RX_FLAG_MMIC_ERROR;
@@ -290,92 +297,37 @@ static void ath9k_rx_prepare(struct ath_softc *sc,
 	rx_status->flag |= RX_FLAG_TSFT;
 }
 
-static u8 parse_mpdudensity(u8 mpdudensity)
-{
-	/*
-	 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
-	 *   0 for no restriction
-	 *   1 for 1/4 us
-	 *   2 for 1/2 us
-	 *   3 for 1 us
-	 *   4 for 2 us
-	 *   5 for 4 us
-	 *   6 for 8 us
-	 *   7 for 16 us
-	 */
-	switch (mpdudensity) {
-	case 0:
-		return 0;
-	case 1:
-	case 2:
-	case 3:
-		/* Our lower layer calculations limit our precision to
-		   1 microsecond */
-		return 1;
-	case 4:
-		return 2;
-	case 5:
-		return 4;
-	case 6:
-		return 8;
-	case 7:
-		return 16;
-	default:
-		return 0;
-	}
-}
-
 static void ath9k_ht_conf(struct ath_softc *sc,
 			  struct ieee80211_bss_conf *bss_conf)
 {
-#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14)
 	struct ath_ht_info *ht_info = &sc->sc_ht_info;
 
-	if (bss_conf->assoc_ht) {
-		ht_info->ext_chan_offset =
-			bss_conf->ht_bss_conf->bss_cap &
-				IEEE80211_HT_IE_CHA_SEC_OFFSET;
+	if (sc->hw->conf.ht.enabled) {
+		ht_info->ext_chan_offset = bss_conf->ht.secondary_channel_offset;
 
-		if (!(bss_conf->ht_conf->cap &
-			IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
-			    (bss_conf->ht_bss_conf->bss_cap &
-				IEEE80211_HT_IE_CHA_WIDTH))
+		if (bss_conf->ht.width_40_ok)
 			ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
 		else
 			ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
 
 		ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
-		ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
-					bss_conf->ht_conf->ampdu_factor);
-		ht_info->mpdudensity =
-			parse_mpdudensity(bss_conf->ht_conf->ampdu_density);
-
 	}
-
-#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT
 }
 
 static void ath9k_bss_assoc_info(struct ath_softc *sc,
+				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_channel *curchan = hw->conf.channel;
-	struct ath_vap *avp;
+	struct ath_vap *avp = (void *)vif->drv_priv;
 	int pos;
-	DECLARE_MAC_BUF(mac);
 
 	if (bss_conf->assoc) {
 		DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n",
 			__func__,
 			bss_conf->aid);
 
-		avp = sc->sc_vaps[0];
-		if (avp == NULL) {
-			DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
-				__func__);
-			return;
-		}
-
 		/* New association, store aid */
 		if (avp->av_opmode == ATH9K_M_STA) {
 			sc->sc_curaid = bss_conf->aid;
@@ -394,12 +346,12 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
 
 		/* Update chainmask */
-		ath_update_chainmask(sc, bss_conf->assoc_ht);
+		ath_update_chainmask(sc, hw->conf.ht.enabled);
 
 		DPRINTF(sc, ATH_DBG_CONFIG,
-			"%s: bssid %s aid 0x%x\n",
+			"%s: bssid %pM aid 0x%x\n",
 			__func__,
-			print_mac(mac, sc->sc_curbssid), sc->sc_curaid);
+			sc->sc_curbssid, sc->sc_curaid);
 
 		DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
 			__func__,
@@ -412,7 +364,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 			return;
 		}
 
-		if (hw->conf.ht_conf.ht_supported)
+		if (hw->conf.ht.enabled)
 			sc->sc_ah->ah_channels[pos].chanmode =
 				ath_get_extchanmode(sc, curchan);
 		else
@@ -456,7 +408,7 @@ void ath_get_beaconconfig(struct ath_softc *sc,
 }
 
 void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
-		     struct ath_xmit_status *tx_status, struct ath_node *an)
+		     struct ath_xmit_status *tx_status)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
@@ -464,12 +416,13 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 	DPRINTF(sc, ATH_DBG_XMIT,
 		"%s: TX complete: skb: %p\n", __func__, skb);
 
+	ieee80211_tx_info_clear_status(tx_info);
 	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK ||
 		tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
-		/* free driver's private data area of tx_info */
-		if (tx_info->driver_data[0] != NULL)
-			kfree(tx_info->driver_data[0]);
-			tx_info->driver_data[0] = NULL;
+		/* free driver's private data area of tx_info, XXX: HACK! */
+		if (tx_info->control.vif != NULL)
+			kfree(tx_info->control.vif);
+			tx_info->control.vif = NULL;
 	}
 
 	if (tx_status->flags & ATH_TX_BAR) {
@@ -477,21 +430,14 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		tx_status->flags &= ~ATH_TX_BAR;
 	}
 
-	if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
-		if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-			/* Frame was not ACKed, but an ACK was expected */
-			tx_info->status.excessive_retries = 1;
-		}
-	} else {
+	if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) {
 		/* Frame was ACKed */
 		tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	tx_info->status.retry_count = tx_status->retries;
+	tx_info->status.rates[0].count = tx_status->retries + 1;
 
 	ieee80211_tx_status(hw, skb);
-	if (an)
-		ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE);
 }
 
 int _ath_rx_indicate(struct ath_softc *sc,
@@ -500,12 +446,10 @@ int _ath_rx_indicate(struct ath_softc *sc,
 		     u16 keyix)
 {
 	struct ieee80211_hw *hw = sc->hw;
-	struct ath_node *an = NULL;
 	struct ieee80211_rx_status rx_status;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 	int padsize;
-	enum ATH_RX_TYPE st;
 
 	/* see if any padding is done by the hw and remove it */
 	if (hdrlen & 3) {
@@ -529,34 +473,6 @@ int _ath_rx_indicate(struct ath_softc *sc,
 			rx_status.flag |= RX_FLAG_DECRYPTED;
 	}
 
-	spin_lock_bh(&sc->node_lock);
-	an = ath_node_find(sc, hdr->addr2);
-	spin_unlock_bh(&sc->node_lock);
-
-	if (an) {
-		ath_rx_input(sc, an,
-			     hw->conf.ht_conf.ht_supported,
-			     skb, status, &st);
-	}
-	if (!an || (st != ATH_RX_CONSUMED))
-		__ieee80211_rx(hw, skb, &rx_status);
-
-	return 0;
-}
-
-int ath_rx_subframe(struct ath_node *an,
-		    struct sk_buff *skb,
-		    struct ath_recv_status *status)
-{
-	struct ath_softc *sc = an->an_sc;
-	struct ieee80211_hw *hw = sc->hw;
-	struct ieee80211_rx_status rx_status;
-
-	/* Prepare rx status */
-	ath9k_rx_prepare(sc, skb, status, &rx_status);
-	if (!(status->flags & ATH_RX_DECRYPT_ERROR))
-		rx_status.flag |= RX_FLAG_DECRYPTED;
-
 	__ieee80211_rx(hw, skb, &rx_status);
 
 	return 0;
@@ -678,6 +594,7 @@ fail:
 }
 
 #ifdef CONFIG_RFKILL
+
 /*******************/
 /*	Rfkill	   */
 /*******************/
@@ -878,43 +795,72 @@ static void ath_deinit_rfkill(struct ath_softc *sc)
 		sc->rf_kill.rfkill = NULL;
 	}
 }
+
+static int ath_start_rfkill_poll(struct ath_softc *sc)
+{
+	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+		queue_delayed_work(sc->hw->workqueue,
+				   &sc->rf_kill.rfkill_poll, 0);
+
+	if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
+		if (rfkill_register(sc->rf_kill.rfkill)) {
+			DPRINTF(sc, ATH_DBG_FATAL,
+				"Unable to register rfkill\n");
+			rfkill_free(sc->rf_kill.rfkill);
+
+			/* Deinitialize the device */
+			if (sc->pdev->irq)
+				free_irq(sc->pdev->irq, sc);
+			ath_detach(sc);
+			pci_iounmap(sc->pdev, sc->mem);
+			pci_release_region(sc->pdev, 0);
+			pci_disable_device(sc->pdev);
+			ieee80211_free_hw(sc->hw);
+			return -EIO;
+		} else {
+			sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
+		}
+	}
+
+	return 0;
+}
 #endif /* CONFIG_RFKILL */
 
-static int ath_detach(struct ath_softc *sc)
+static void ath_detach(struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
+	int i = 0;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__);
 
-	/* Deinit LED control */
+	ieee80211_unregister_hw(hw);
+
 	ath_deinit_leds(sc);
 
 #ifdef CONFIG_RFKILL
-	/* deinit rfkill */
 	ath_deinit_rfkill(sc);
 #endif
-
-	/* Unregister hw */
-
-	ieee80211_unregister_hw(hw);
-
-	/* unregister Rate control */
 	ath_rate_control_unregister();
-
-	/* tx/rx cleanup */
+	ath_rate_detach(sc->sc_rc);
 
 	ath_rx_cleanup(sc);
 	ath_tx_cleanup(sc);
 
-	/* Deinit */
+	tasklet_kill(&sc->intr_tq);
+	tasklet_kill(&sc->bcon_tasklet);
 
-	ath_deinit(sc);
+	if (!(sc->sc_flags & SC_OP_INVALID))
+		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
 
-	return 0;
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->sc_txq[i]);
+
+	ath9k_hw_detach(sc->sc_ah);
 }
 
-static int ath_attach(u16 devid,
-		      struct ath_softc *sc)
+static int ath_attach(u16 devid, struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	int error = 0;
@@ -925,50 +871,23 @@ static int ath_attach(u16 devid,
 	if (error != 0)
 		return error;
 
-	/* Init nodes */
-
-	INIT_LIST_HEAD(&sc->node_list);
-	spin_lock_init(&sc->node_lock);
-
 	/* get mac address from hardware and set in mac80211 */
 
 	SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr);
 
-	/* setup channels and rates */
-
-	sc->sbands[IEEE80211_BAND_2GHZ].channels =
-		sc->channels[IEEE80211_BAND_2GHZ];
-	sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
-		sc->rates[IEEE80211_BAND_2GHZ];
-	sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-
-	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
-		/* Setup HT capabilities for 2.4Ghz*/
-		setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info);
-
-	hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-		&sc->sbands[IEEE80211_BAND_2GHZ];
-
-	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) {
-		sc->sbands[IEEE80211_BAND_5GHZ].channels =
-			sc->channels[IEEE80211_BAND_5GHZ];
-		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			sc->rates[IEEE80211_BAND_5GHZ];
-		sc->sbands[IEEE80211_BAND_5GHZ].band =
-			IEEE80211_BAND_5GHZ;
-
-		if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
-			/* Setup HT capabilities for 5Ghz*/
-			setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info);
-
-		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&sc->sbands[IEEE80211_BAND_5GHZ];
-	}
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+		IEEE80211_HW_SIGNAL_DBM |
+		IEEE80211_HW_AMPDU_AGGREGATION;
 
-	/* FIXME: Have to figure out proper hw init values later */
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
 
 	hw->queues = 4;
-	hw->ampdu_queues = 1;
+	hw->sta_data_size = sizeof(struct ath_node);
+	hw->vif_data_size = sizeof(struct ath_vap);
 
 	/* Register rate control */
 	hw->rate_control_algorithm = "ath9k_rate_control";
@@ -981,6 +900,17 @@ static int ath_attach(u16 devid,
 		goto bad;
 	}
 
+	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) {
+		setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+		if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes))
+			setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+	}
+
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] =	&sc->sbands[IEEE80211_BAND_2GHZ];
+	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes))
+		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&sc->sbands[IEEE80211_BAND_5GHZ];
+
 	error = ieee80211_register_hw(hw);
 	if (error != 0) {
 		ath_rate_control_unregister();
@@ -1026,62 +956,44 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with "
 		"initial channel: %d MHz\n", __func__, curchan->center_freq);
 
+	memset(&sc->sc_ht_info, 0, sizeof(struct ath_ht_info));
+
 	/* setup initial channel */
 
 	pos = ath_get_channel(sc, curchan);
 	if (pos == -1) {
 		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
-		return -EINVAL;
+		error = -EINVAL;
+		goto exit;
 	}
 
 	sc->sc_ah->ah_channels[pos].chanmode =
 		(curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A;
 
-	/* open ath_dev */
 	error = ath_open(sc, &sc->sc_ah->ah_channels[pos]);
 	if (error) {
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"%s: Unable to complete ath_open\n", __func__);
-		return error;
+		goto exit;
 	}
 
 #ifdef CONFIG_RFKILL
-	/* Start rfkill polling */
-	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		queue_delayed_work(sc->hw->workqueue,
-				   &sc->rf_kill.rfkill_poll, 0);
-
-	if (!(sc->sc_flags & SC_OP_RFKILL_REGISTERED)) {
-		if (rfkill_register(sc->rf_kill.rfkill)) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-					"Unable to register rfkill\n");
-			rfkill_free(sc->rf_kill.rfkill);
-
-			/* Deinitialize the device */
-			if (sc->pdev->irq)
-				free_irq(sc->pdev->irq, sc);
-			ath_detach(sc);
-			pci_iounmap(sc->pdev, sc->mem);
-			pci_release_region(sc->pdev, 0);
-			pci_disable_device(sc->pdev);
-			ieee80211_free_hw(hw);
-			return -EIO;
-		} else {
-			sc->sc_flags |= SC_OP_RFKILL_REGISTERED;
-		}
-	}
+	error = ath_start_rfkill_poll(sc);
 #endif
 
-	ieee80211_wake_queues(hw);
-	return 0;
+exit:
+	return error;
 }
 
 static int ath9k_tx(struct ieee80211_hw *hw,
 		    struct sk_buff *skb)
 {
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath_softc *sc = hw->priv;
+	struct ath_tx_control txctl;
 	int hdrlen, padsize;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	memset(&txctl, 0, sizeof(struct ath_tx_control));
 
 	/*
 	 * As a temporary workaround, assign seq# here; this will likely need
@@ -1106,45 +1018,47 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 		memmove(skb->data, skb->data + padsize, hdrlen);
 	}
 
+	/* Check if a tx queue is available */
+
+	txctl.txq = ath_test_get_txq(sc, skb);
+	if (!txctl.txq)
+		goto exit;
+
 	DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n",
 		__func__,
 		skb);
 
-	if (ath_tx_start(sc, skb) != 0) {
+	if (ath_tx_start(sc, skb, &txctl) != 0) {
 		DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__);
-		dev_kfree_skb_any(skb);
-		/* FIXME: Check for proper return value from ATH_DEV */
-		return 0;
+		goto exit;
 	}
 
 	return 0;
+exit:
+	dev_kfree_skb_any(skb);
+	return 0;
 }
 
 static void ath9k_stop(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
-	int error;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__);
-
-	error = ath_suspend(sc);
-	if (error)
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"%s: Device is no longer present\n", __func__);
+	if (sc->sc_flags & SC_OP_INVALID) {
+		DPRINTF(sc, ATH_DBG_ANY, "%s: Device not present\n", __func__);
+		return;
+	}
 
-	ieee80211_stop_queues(hw);
+	ath_stop(sc);
 
-#ifdef CONFIG_RFKILL
-	if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
+	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__);
 }
 
 static int ath9k_add_interface(struct ieee80211_hw *hw,
 			       struct ieee80211_if_init_conf *conf)
 {
 	struct ath_softc *sc = hw->priv;
-	int error, ic_opmode = 0;
+	struct ath_vap *avp = (void *)conf->vif->drv_priv;
+	int ic_opmode = 0;
 
 	/* Support only vap for now */
 
@@ -1172,13 +1086,22 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		__func__,
 		ic_opmode);
 
-	error = ath_vap_attach(sc, 0, conf->vif, ic_opmode);
-	if (error) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"%s: Unable to attach vap, error: %d\n",
-			__func__, error);
-		return error;
-	}
+	/* Set the VAP opmode */
+	avp->av_opmode = ic_opmode;
+	avp->av_bslot = -1;
+
+	if (ic_opmode == ATH9K_M_HOSTAP)
+		ath9k_hw_set_tsfadjust(sc->sc_ah, 1);
+
+	sc->sc_vaps[0] = conf->vif;
+	sc->sc_nvaps++;
+
+	/* Set the device opmode */
+	sc->sc_ah->ah_opmode = ic_opmode;
+
+	/* default VAP configuration */
+	avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE;
+	avp->av_config.av_fixed_retryset = 0x03030303;
 
 	if (conf->type == NL80211_IFTYPE_AP) {
 		/* TODO: is this a suitable place to start ANI for AP mode? */
@@ -1194,27 +1117,16 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 				   struct ieee80211_if_init_conf *conf)
 {
 	struct ath_softc *sc = hw->priv;
-	struct ath_vap *avp;
-	int error;
+	struct ath_vap *avp = (void *)conf->vif->drv_priv;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__);
 
-	avp = sc->sc_vaps[0];
-	if (avp == NULL) {
-		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
-			__func__);
-		return;
-	}
-
 #ifdef CONFIG_SLOW_ANT_DIV
 	ath_slow_ant_div_stop(&sc->sc_antdiv);
 #endif
 	/* Stop ANI */
 	del_timer_sync(&sc->sc_ani.timer);
 
-	/* Update ratectrl */
-	ath_rate_newstate(sc, avp);
-
 	/* Reclaim beacon resources */
 	if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP ||
 	    sc->sc_ah->ah_opmode == ATH9K_M_IBSS) {
@@ -1222,29 +1134,26 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 		ath_beacon_return(sc, avp);
 	}
 
-	/* Set interrupt mask */
-	sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
-	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL);
 	sc->sc_flags &= ~SC_OP_BEACONS;
 
-	error = ath_vap_detach(sc, 0);
-	if (error)
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"%s: Unable to detach vap, error: %d\n",
-			__func__, error);
+	sc->sc_vaps[0] = NULL;
+	sc->sc_nvaps--;
 }
 
-static int ath9k_config(struct ieee80211_hw *hw,
-			struct ieee80211_conf *conf)
+static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath_softc *sc = hw->priv;
 	struct ieee80211_channel *curchan = hw->conf.channel;
+	struct ieee80211_conf *conf = &hw->conf;
 	int pos;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
 		__func__,
 		curchan->center_freq);
 
+	/* Update chainmask */
+	ath_update_chainmask(sc, conf->ht.enabled);
+
 	pos = ath_get_channel(sc, curchan);
 	if (pos == -1) {
 		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
@@ -1255,11 +1164,12 @@ static int ath9k_config(struct ieee80211_hw *hw,
 		(curchan->band == IEEE80211_BAND_2GHZ) ?
 		CHANNEL_G : CHANNEL_A;
 
-	if (sc->sc_curaid && hw->conf.ht_conf.ht_supported)
+	if (sc->sc_curaid && hw->conf.ht.enabled)
 		sc->sc_ah->ah_channels[pos].chanmode =
 			ath_get_extchanmode(sc, curchan);
 
-	sc->sc_config.txpowlimit = 2 * conf->power_level;
+	if (changed & IEEE80211_CONF_CHANGE_POWER)
+		sc->sc_config.txpowlimit = 2 * conf->power_level;
 
 	/* set h/w channel */
 	if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
@@ -1275,17 +1185,9 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
 {
 	struct ath_softc *sc = hw->priv;
 	struct ath_hal *ah = sc->sc_ah;
-	struct ath_vap *avp;
+	struct ath_vap *avp = (void *)vif->drv_priv;
 	u32 rfilt = 0;
 	int error, i;
-	DECLARE_MAC_BUF(mac);
-
-	avp = sc->sc_vaps[0];
-	if (avp == NULL) {
-		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n",
-			__func__);
-		return -EINVAL;
-	}
 
 	/* TODO: Need to decide which hw opmode to use for multi-interface
 	 * cases */
@@ -1315,27 +1217,10 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
 			/* Set aggregation protection mode parameters */
 			sc->sc_config.ath_aggr_prot = 0;
 
-			/*
-			 * Reset our TSF so that its value is lower than the
-			 * beacon that we are trying to catch.
-			 * Only then hw will update its TSF register with the
-			 * new beacon. Reset the TSF before setting the BSSID
-			 * to avoid allowing in any frames that would update
-			 * our TSF only to have us clear it
-			 * immediately thereafter.
-			 */
-			ath9k_hw_reset_tsf(sc->sc_ah);
-
-			/* Disable BMISS interrupt when we're not associated */
-			ath9k_hw_set_interrupts(sc->sc_ah,
-					sc->sc_imask &
-					~(ATH9K_INT_SWBA | ATH9K_INT_BMISS));
-			sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
-
 			DPRINTF(sc, ATH_DBG_CONFIG,
-				"%s: RX filter 0x%x bssid %s aid 0x%x\n",
+				"%s: RX filter 0x%x bssid %pM aid 0x%x\n",
 				__func__, rfilt,
-				print_mac(mac, sc->sc_curbssid), sc->sc_curaid);
+				sc->sc_curbssid, sc->sc_curaid);
 
 			/* need to reconfigure the beacon */
 			sc->sc_flags &= ~SC_OP_BEACONS ;
@@ -1367,7 +1252,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw,
 	}
 
 	/* Check for WLAN_CAPABILITY_PRIVACY ? */
-	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
+	if ((avp->av_opmode != ATH9K_M_STA)) {
 		for (i = 0; i < IEEE80211_WEP_NKID; i++)
 			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
 				ath9k_hw_keysetmac(sc->sc_ah,
@@ -1422,37 +1307,13 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw,
 			     struct ieee80211_sta *sta)
 {
 	struct ath_softc *sc = hw->priv;
-	struct ath_node *an;
-	unsigned long flags;
-	DECLARE_MAC_BUF(mac);
-
-	spin_lock_irqsave(&sc->node_lock, flags);
-	an = ath_node_find(sc, sta->addr);
-	spin_unlock_irqrestore(&sc->node_lock, flags);
 
 	switch (cmd) {
 	case STA_NOTIFY_ADD:
-		spin_lock_irqsave(&sc->node_lock, flags);
-		if (!an) {
-			ath_node_attach(sc, sta->addr, 0);
-			DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n",
-				__func__, print_mac(mac, sta->addr));
-		} else {
-			ath_node_get(sc, sta->addr);
-		}
-		spin_unlock_irqrestore(&sc->node_lock, flags);
+		ath_node_attach(sc, sta);
 		break;
 	case STA_NOTIFY_REMOVE:
-		if (!an)
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"%s: Removal of a non-existent node\n",
-				__func__);
-		else {
-			ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT);
-			DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n",
-				__func__,
-				print_mac(mac, sta->addr));
-		}
+		ath_node_detach(sc, sta);
 		break;
 	default:
 		break;
@@ -1558,9 +1419,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_HT) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n",
-			__func__,
-			bss_conf->assoc_ht);
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT\n",
+			__func__);
 		ath9k_ht_conf(sc, bss_conf);
 	}
 
@@ -1568,7 +1428,7 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n",
 			__func__,
 			bss_conf->assoc);
-		ath9k_bss_assoc_info(sc, bss_conf);
+		ath9k_bss_assoc_info(sc, vif, bss_conf);
 	}
 }
 
@@ -1601,21 +1461,13 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 
 	switch (action) {
 	case IEEE80211_AMPDU_RX_START:
-		ret = ath_rx_aggr_start(sc, sta->addr, tid, ssn);
-		if (ret < 0)
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"%s: Unable to start RX aggregation\n",
-				__func__);
+		if (!(sc->sc_flags & SC_OP_RXAGGR))
+			ret = -ENOTSUPP;
 		break;
 	case IEEE80211_AMPDU_RX_STOP:
-		ret = ath_rx_aggr_stop(sc, sta->addr, tid);
-		if (ret < 0)
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"%s: Unable to stop RX aggregation\n",
-				__func__);
 		break;
 	case IEEE80211_AMPDU_TX_START:
-		ret = ath_tx_aggr_start(sc, sta->addr, tid, ssn);
+		ret = ath_tx_aggr_start(sc, sta, tid, ssn);
 		if (ret < 0)
 			DPRINTF(sc, ATH_DBG_FATAL,
 				"%s: Unable to start TX aggregation\n",
@@ -1624,7 +1476,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 			ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
 		break;
 	case IEEE80211_AMPDU_TX_STOP:
-		ret = ath_tx_aggr_stop(sc, sta->addr, tid);
+		ret = ath_tx_aggr_stop(sc, sta, tid);
 		if (ret < 0)
 			DPRINTF(sc, ATH_DBG_FATAL,
 				"%s: Unable to stop TX aggregation\n",
@@ -1632,6 +1484,9 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 
 		ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
 		break;
+	case IEEE80211_AMPDU_TX_RESUME:
+		ath_tx_aggr_resume(sc, sta, tid);
+		break;
 	default:
 		DPRINTF(sc, ATH_DBG_FATAL,
 			"%s: Unknown AMPDU action\n", __func__);
@@ -1654,21 +1509,12 @@ static struct ieee80211_ops ath9k_ops = {
 	.config 	    = ath9k_config,
 	.config_interface   = ath9k_config_interface,
 	.configure_filter   = ath9k_configure_filter,
-	.get_stats          = NULL,
 	.sta_notify         = ath9k_sta_notify,
 	.conf_tx 	    = ath9k_conf_tx,
-	.get_tx_stats 	    = NULL,
 	.bss_info_changed   = ath9k_bss_info_changed,
-	.set_tim            = NULL,
 	.set_key            = ath9k_set_key,
-	.hw_scan            = NULL,
-	.get_tkip_seq       = NULL,
-	.set_rts_threshold  = NULL,
-	.set_frag_threshold = NULL,
-	.set_retry_limit    = NULL,
 	.get_tsf 	    = ath9k_get_tsf,
 	.reset_tsf 	    = ath9k_reset_tsf,
-	.tx_last_beacon     = NULL,
 	.ampdu_action       = ath9k_ampdu_action,
 	.set_frag_threshold = ath9k_no_fragmentation,
 };
@@ -1746,16 +1592,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto bad2;
 	}
 
-	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM;
-
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_AP) |
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC);
-
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 	pci_set_drvdata(pdev, hw);
 
@@ -1803,17 +1639,10 @@ static void ath_pci_remove(struct pci_dev *pdev)
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_softc *sc = hw->priv;
-	enum ath9k_int status;
 
-	if (pdev->irq) {
-		ath9k_hw_set_interrupts(sc->sc_ah, 0);
-		/* clear the ISR */
-		ath9k_hw_getisr(sc->sc_ah, &status);
-		sc->sc_flags |= SC_OP_INVALID;
-		free_irq(pdev->irq, sc);
-	}
 	ath_detach(sc);
-
+	if (pdev->irq)
+		free_irq(pdev->irq, sc);
 	pci_iounmap(pdev, sc->mem);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);