diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/link.c')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/link.c | 555 |
1 files changed, 555 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c new file mode 100644 index 0000000..d4549e9 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -0,0 +1,555 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ath9k.h" + +/* + * TX polling - checks if the TX engine is stuck somewhere + * and issues a chip reset if so. + */ +void ath_tx_complete_poll_work(struct work_struct *work) +{ + struct ath_softc *sc = container_of(work, struct ath_softc, + tx_complete_work.work); + struct ath_txq *txq; + int i; + bool needreset = false; +#ifdef CONFIG_ATH9K_DEBUGFS + sc->tx_complete_poll_work_seen++; +#endif + + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) { + txq = &sc->tx.txq[i]; + ath_txq_lock(sc, txq); + if (txq->axq_depth) { + if (txq->axq_tx_inprogress) { + needreset = true; + ath_txq_unlock(sc, txq); + break; + } else { + txq->axq_tx_inprogress = true; + } + } + ath_txq_unlock_complete(sc, txq); + } + + if (needreset) { + ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, + "tx hung, resetting the chip\n"); + ath9k_queue_reset(sc, RESET_TYPE_TX_HANG); + return; + } + + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, + msecs_to_jiffies(ATH_TX_COMPLETE_POLL_INT)); +} + +/* + * Checks if the BB/MAC is hung. + */ +void ath_hw_check(struct work_struct *work) +{ + struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work); + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + unsigned long flags; + int busy; + u8 is_alive, nbeacon = 1; + enum ath_reset_type type; + + ath9k_ps_wakeup(sc); + is_alive = ath9k_hw_check_alive(sc->sc_ah); + + if (is_alive && !AR_SREV_9300(sc->sc_ah)) + goto out; + else if (!is_alive && AR_SREV_9300(sc->sc_ah)) { + ath_dbg(common, RESET, + "DCU stuck is detected. Schedule chip reset\n"); + type = RESET_TYPE_MAC_HANG; + goto sched_reset; + } + + spin_lock_irqsave(&common->cc_lock, flags); + busy = ath_update_survey_stats(sc); + spin_unlock_irqrestore(&common->cc_lock, flags); + + ath_dbg(common, RESET, "Possible baseband hang, busy=%d (try %d)\n", + busy, sc->hw_busy_count + 1); + if (busy >= 99) { + if (++sc->hw_busy_count >= 3) { + type = RESET_TYPE_BB_HANG; + goto sched_reset; + } + } else if (busy >= 0) { + sc->hw_busy_count = 0; + nbeacon = 3; + } + + ath_start_rx_poll(sc, nbeacon); + goto out; + +sched_reset: + ath9k_queue_reset(sc, type); +out: + ath9k_ps_restore(sc); +} + +/* + * PLL-WAR for AR9485/AR9340 + */ +static bool ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum) +{ + static int count; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + + if (pll_sqsum >= 0x40000) { + count++; + if (count == 3) { + ath_dbg(common, RESET, "PLL WAR, resetting the chip\n"); + ath9k_queue_reset(sc, RESET_TYPE_PLL_HANG); + count = 0; + return true; + } + } else { + count = 0; + } + + return false; +} + +void ath_hw_pll_work(struct work_struct *work) +{ + u32 pll_sqsum; + struct ath_softc *sc = container_of(work, struct ath_softc, + hw_pll_work.work); + /* + * ensure that the PLL WAR is executed only + * after the STA is associated (or) if the + * beaconing had started in interfaces that + * uses beacons. + */ + if (!test_bit(SC_OP_BEACONS, &sc->sc_flags)) + return; + + ath9k_ps_wakeup(sc); + pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah); + ath9k_ps_restore(sc); + if (ath_hw_pll_rx_hang_check(sc, pll_sqsum)) + return; + + ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, + msecs_to_jiffies(ATH_PLL_WORK_INTERVAL)); +} + +/* + * RX Polling - monitors baseband hangs. + */ +void ath_start_rx_poll(struct ath_softc *sc, u8 nbeacon) +{ + if (!AR_SREV_9300(sc->sc_ah)) + return; + + if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) + return; + + mod_timer(&sc->rx_poll_timer, jiffies + msecs_to_jiffies + (nbeacon * sc->cur_beacon_conf.beacon_interval)); +} + +void ath_rx_poll(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + + ieee80211_queue_work(sc->hw, &sc->hw_check_work); +} + +/* + * PA Pre-distortion. + */ +static void ath_paprd_activate(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath9k_hw_cal_data *caldata = ah->caldata; + int chain; + + if (!caldata || !caldata->paprd_done) + return; + + ath9k_ps_wakeup(sc); + ar9003_paprd_enable(ah, false); + for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { + if (!(ah->txchainmask & BIT(chain))) + continue; + + ar9003_paprd_populate_single_table(ah, caldata, chain); + } + + ar9003_paprd_enable(ah, true); + ath9k_ps_restore(sc); +} + +static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ath_tx_control txctl; + int time_left; + + memset(&txctl, 0, sizeof(txctl)); + txctl.txq = sc->tx.txq_map[WME_AC_BE]; + + memset(tx_info, 0, sizeof(*tx_info)); + tx_info->band = hw->conf.channel->band; + tx_info->flags |= IEEE80211_TX_CTL_NO_ACK; + tx_info->control.rates[0].idx = 0; + tx_info->control.rates[0].count = 1; + tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS; + tx_info->control.rates[1].idx = -1; + + init_completion(&sc->paprd_complete); + txctl.paprd = BIT(chain); + + if (ath_tx_start(hw, skb, &txctl) != 0) { + ath_dbg(common, CALIBRATE, "PAPRD TX failed\n"); + dev_kfree_skb_any(skb); + return false; + } + + time_left = wait_for_completion_timeout(&sc->paprd_complete, + msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); + + if (!time_left) + ath_dbg(common, CALIBRATE, + "Timeout waiting for paprd training on TX chain %d\n", + chain); + + return !!time_left; +} + +void ath_paprd_calibrate(struct work_struct *work) +{ + struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work); + struct ieee80211_hw *hw = sc->hw; + struct ath_hw *ah = sc->sc_ah; + struct ieee80211_hdr *hdr; + struct sk_buff *skb = NULL; + struct ath9k_hw_cal_data *caldata = ah->caldata; + struct ath_common *common = ath9k_hw_common(ah); + int ftype; + int chain_ok = 0; + int chain; + int len = 1800; + + if (!caldata) + return; + + ath9k_ps_wakeup(sc); + + if (ar9003_paprd_init_table(ah) < 0) + goto fail_paprd; + + skb = alloc_skb(len, GFP_KERNEL); + if (!skb) + goto fail_paprd; + + skb_put(skb, len); + memset(skb->data, 0, len); + hdr = (struct ieee80211_hdr *)skb->data; + ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC; + hdr->frame_control = cpu_to_le16(ftype); + hdr->duration_id = cpu_to_le16(10); + memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN); + memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN); + memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN); + + for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { + if (!(ah->txchainmask & BIT(chain))) + continue; + + chain_ok = 0; + + ath_dbg(common, CALIBRATE, + "Sending PAPRD frame for thermal measurement on chain %d\n", + chain); + if (!ath_paprd_send_frame(sc, skb, chain)) + goto fail_paprd; + + ar9003_paprd_setup_gain_table(ah, chain); + + ath_dbg(common, CALIBRATE, + "Sending PAPRD training frame on chain %d\n", chain); + if (!ath_paprd_send_frame(sc, skb, chain)) + goto fail_paprd; + + if (!ar9003_paprd_is_done(ah)) { + ath_dbg(common, CALIBRATE, + "PAPRD not yet done on chain %d\n", chain); + break; + } + + if (ar9003_paprd_create_curve(ah, caldata, chain)) { + ath_dbg(common, CALIBRATE, + "PAPRD create curve failed on chain %d\n", + chain); + break; + } + + chain_ok = 1; + } + kfree_skb(skb); + + if (chain_ok) { + caldata->paprd_done = true; + ath_paprd_activate(sc); + } + +fail_paprd: + ath9k_ps_restore(sc); +} + +/* + * ANI performs periodic noise floor calibration + * that is used to adjust and optimize the chip performance. This + * takes environmental changes (location, temperature) into account. + * When the task is complete, it reschedules itself depending on the + * appropriate interval that was calculated. + */ +void ath_ani_calibrate(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + bool longcal = false; + bool shortcal = false; + bool aniflag = false; + unsigned int timestamp = jiffies_to_msecs(jiffies); + u32 cal_interval, short_cal_interval, long_cal_interval; + unsigned long flags; + + if (ah->caldata && ah->caldata->nfcal_interference) + long_cal_interval = ATH_LONG_CALINTERVAL_INT; + else + long_cal_interval = ATH_LONG_CALINTERVAL; + + short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ? + ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL; + + /* Only calibrate if awake */ + if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE) + goto set_timer; + + ath9k_ps_wakeup(sc); + + /* Long calibration runs independently of short calibration. */ + if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) { + longcal = true; + common->ani.longcal_timer = timestamp; + } + + /* Short calibration applies only while caldone is false */ + if (!common->ani.caldone) { + if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) { + shortcal = true; + common->ani.shortcal_timer = timestamp; + common->ani.resetcal_timer = timestamp; + } + } else { + if ((timestamp - common->ani.resetcal_timer) >= + ATH_RESTART_CALINTERVAL) { + common->ani.caldone = ath9k_hw_reset_calvalid(ah); + if (common->ani.caldone) + common->ani.resetcal_timer = timestamp; + } + } + + /* Verify whether we must check ANI */ + if (sc->sc_ah->config.enable_ani + && (timestamp - common->ani.checkani_timer) >= + ah->config.ani_poll_interval) { + aniflag = true; + common->ani.checkani_timer = timestamp; + } + + /* Call ANI routine if necessary */ + if (aniflag) { + spin_lock_irqsave(&common->cc_lock, flags); + ath9k_hw_ani_monitor(ah, ah->curchan); + ath_update_survey_stats(sc); + spin_unlock_irqrestore(&common->cc_lock, flags); + } + + /* Perform calibration if necessary */ + if (longcal || shortcal) { + common->ani.caldone = + ath9k_hw_calibrate(ah, ah->curchan, + ah->rxchainmask, longcal); + } + + ath_dbg(common, ANI, + "Calibration @%lu finished: %s %s %s, caldone: %s\n", + jiffies, + longcal ? "long" : "", shortcal ? "short" : "", + aniflag ? "ani" : "", common->ani.caldone ? "true" : "false"); + + ath9k_debug_samp_bb_mac(sc); + ath9k_ps_restore(sc); + +set_timer: + /* + * Set timer interval based on previous results. + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ + cal_interval = ATH_LONG_CALINTERVAL; + if (sc->sc_ah->config.enable_ani) + cal_interval = min(cal_interval, + (u32)ah->config.ani_poll_interval); + if (!common->ani.caldone) + cal_interval = min(cal_interval, (u32)short_cal_interval); + + mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); + if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) { + if (!ah->caldata->paprd_done) + ieee80211_queue_work(sc->hw, &sc->paprd_work); + else if (!ah->paprd_table_write_done) + ath_paprd_activate(sc); + } +} + +void ath_start_ani(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + unsigned long timestamp = jiffies_to_msecs(jiffies); + + if (common->disable_ani || + !test_bit(SC_OP_ANI_RUN, &sc->sc_flags) || + (sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) + return; + + common->ani.longcal_timer = timestamp; + common->ani.shortcal_timer = timestamp; + common->ani.checkani_timer = timestamp; + + ath_dbg(common, ANI, "Starting ANI\n"); + mod_timer(&common->ani.timer, + jiffies + msecs_to_jiffies((u32)ah->config.ani_poll_interval)); +} + +void ath_stop_ani(struct ath_softc *sc) +{ + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + + ath_dbg(common, ANI, "Stopping ANI\n"); + del_timer_sync(&common->ani.timer); +} + +void ath_check_ani(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf; + + /* + * Check for the various conditions in which ANI has to + * be stopped. + */ + if (ah->opmode == NL80211_IFTYPE_ADHOC) { + if (!cur_conf->enable_beacon) + goto stop_ani; + } else if (ah->opmode == NL80211_IFTYPE_AP) { + if (!cur_conf->enable_beacon) { + /* + * Disable ANI only when there are no + * associated stations. + */ + if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) + goto stop_ani; + } + } else if (ah->opmode == NL80211_IFTYPE_STATION) { + if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) + goto stop_ani; + } + + if (!test_bit(SC_OP_ANI_RUN, &sc->sc_flags)) { + set_bit(SC_OP_ANI_RUN, &sc->sc_flags); + ath_start_ani(sc); + } + + return; + +stop_ani: + clear_bit(SC_OP_ANI_RUN, &sc->sc_flags); + ath_stop_ani(sc); +} + +void ath_update_survey_nf(struct ath_softc *sc, int channel) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath9k_channel *chan = &ah->channels[channel]; + struct survey_info *survey = &sc->survey[channel]; + + if (chan->noisefloor) { + survey->filled |= SURVEY_INFO_NOISE_DBM; + survey->noise = ath9k_hw_getchan_noise(ah, chan); + } +} + +/* + * Updates the survey statistics and returns the busy time since last + * update in %, if the measurement duration was long enough for the + * result to be useful, -1 otherwise. + */ +int ath_update_survey_stats(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + int pos = ah->curchan - &ah->channels[0]; + struct survey_info *survey = &sc->survey[pos]; + struct ath_cycle_counters *cc = &common->cc_survey; + unsigned int div = common->clockrate * 1000; + int ret = 0; + + if (!ah->curchan) + return -1; + + if (ah->power_mode == ATH9K_PM_AWAKE) + ath_hw_cycle_counters_update(common); + + if (cc->cycles > 0) { + survey->filled |= SURVEY_INFO_CHANNEL_TIME | + SURVEY_INFO_CHANNEL_TIME_BUSY | + SURVEY_INFO_CHANNEL_TIME_RX | + SURVEY_INFO_CHANNEL_TIME_TX; + survey->channel_time += cc->cycles / div; + survey->channel_time_busy += cc->rx_busy / div; + survey->channel_time_rx += cc->rx_frame / div; + survey->channel_time_tx += cc->tx_frame / div; + } + + if (cc->cycles < div) + return -1; + + if (cc->cycles > 0) + ret = cc->rx_busy * 100 / cc->cycles; + + memset(cc, 0, sizeof(*cc)); + + ath_update_survey_nf(sc, pos); + + return ret; +} |