diff options
Diffstat (limited to 'drivers/net/wireless/Kconfig')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 136 |
1 files changed, 86 insertions, 50 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ae27af0..5a6fdfd 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -63,11 +63,6 @@ config WAVELAN a Radio LAN (wireless Ethernet-like Local Area Network) using the radio frequencies 900 MHz and 2.4 GHz. - This driver support the ISA version of the WaveLAN card. A separate - driver for the PCMCIA (PC-card) hardware is available in David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). - If you want to use an ISA WaveLAN card under Linux, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. Some more specific @@ -280,6 +275,13 @@ config LIBERTAS_USB ---help--- A driver for Marvell Libertas 8388 USB devices. +config LIBERTAS_CS + tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" + depends on LIBERTAS && PCMCIA && EXPERIMENTAL + select FW_LOADER + ---help--- + A driver for Marvell Libertas 8385 CompactFlash devices. + config LIBERTAS_DEBUG bool "Enable full debugging output in the Libertas module." depends on LIBERTAS @@ -379,30 +381,6 @@ config PCI_HERMES common. Some of the built-in wireless adaptors in laptops are of this variety. -config ATMEL - tristate "Atmel at76c50x chipset 802.11b support" - depends on (PCI || PCMCIA) && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select CRC32 - ---help--- - A driver 802.11b wireless cards based on the Atmel fast-vnet - chips. This driver supports standard Linux wireless extensions. - - Many cards based on this chipset do not have flash memory - and need their firmware loaded at start-up. If yours is - one of these, you will need to provide a firmware image - to be loaded into the card by the driver. The Atmel - firmware package can be downloaded from - <http://www.thekelleys.org.uk/atmel> - -config PCI_ATMEL - tristate "Atmel at76c506 PCI cards" - depends on ATMEL && PCI - ---help--- - Enable support for PCI and mini-PCI cards containing the - Atmel at76c506 chip. - config PCMCIA_HERMES tristate "Hermes PCMCIA card support" depends on PCMCIA && HERMES @@ -414,12 +392,7 @@ config PCMCIA_HERMES such as the Linksys, D-Link and Farallon Skyline. It should also work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). You also want to check out the PCMCIA-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - You will also very likely also need the Wireless Tools in order to + You will very likely need the Wireless Tools in order to configure your card and that /etc/pcmcia/wireless.opts works: <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. @@ -437,6 +410,40 @@ config PCMCIA_SPECTRUM for downloading Symbol firmware are available at <http://sourceforge.net/projects/orinoco/> +config ATMEL + tristate "Atmel at76c50x chipset 802.11b support" + depends on (PCI || PCMCIA) && WLAN_80211 + select WIRELESS_EXT + select FW_LOADER + select CRC32 + ---help--- + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. + + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + <http://www.thekelleys.org.uk/atmel> + +config PCI_ATMEL + tristate "Atmel at76c506 PCI cards" + depends on ATMEL && PCI + ---help--- + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. + +config PCMCIA_ATMEL + tristate "Atmel at76c502/at76c504 PCMCIA cards" + depends on ATMEL && PCMCIA + select WIRELESS_EXT + select FW_LOADER + select CRC32 + ---help--- + Enable support for PCMCIA cards containing the + Atmel at76c502 and at76c504 chips. + config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 @@ -457,21 +464,6 @@ config AIRO_CS and Cisco proprietary API, so both the Linux Wireless Tools and the Cisco Linux utilities can be used to configure the card. - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). You also want to check out the PCMCIA-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - -config PCMCIA_ATMEL - tristate "Atmel at76c502/at76c504 PCMCIA cards" - depends on ATMEL && PCMCIA - select WIRELESS_EXT - select FW_LOADER - select CRC32 - ---help--- - Enable support for PCMCIA cards containing the - Atmel at76c502 and at76c504 chips. - config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" depends on EXPERIMENTAL && PCMCIA && WLAN_80211 @@ -558,8 +550,52 @@ config RTL8187 Thanks to Realtek for their support! +config ADM8211 + tristate "ADMtek ADM8211 support" + depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + select CRC32 + select EEPROM_93CX6 + ---help--- + This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. + These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: + + Xterasys Cardbus XN-2411b + Blitz NetWave Point PC + TrendNet 221pc + Belkin F5D6001 + SMC 2635W + Linksys WPC11 v1 + Fiberline FL-WL-200X + 3com Office Connect (3CRSHPW796) + Corega WLPCIB-11 + SMC 2602W V2 EU + D-Link DWL-520 Revision C + + However, some of these cards have been replaced with other chips + like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or + the Ralink RT2400 (SMC2635W) without a model number change. + + Thanks to Infineon-ADMtek for their support of this driver. + +config P54_COMMON + tristate "Softmac Prism54 support" + depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL + +config P54_USB + tristate "Prism54 USB support" + depends on P54_COMMON && USB + select CRC32 + +config P54_PCI + tristate "Prism54 PCI support" + depends on P54_COMMON && PCI + +source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" +source "drivers/net/wireless/b43/Kconfig" +source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" +source "drivers/net/wireless/rt2x00/Kconfig" endmenu |
