summaryrefslogtreecommitdiffstats
path: root/drivers/net/wimax/i2400m/sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wimax/i2400m/sdio.c')
-rw-r--r--drivers/net/wimax/i2400m/sdio.c205
1 files changed, 125 insertions, 80 deletions
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 2981e21..76a50ac 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -43,18 +43,9 @@
* i2400m_release()
* free_netdev(net_dev)
*
- * i2400ms_bus_reset() Called by i2400m->bus_reset
+ * i2400ms_bus_reset() Called by i2400m_reset
* __i2400ms_reset()
* __i2400ms_send_barker()
- *
- * i2400ms_bus_dev_start() Called by i2400m_dev_start() [who is
- * i2400ms_tx_setup() called by i2400m_setup()]
- * i2400ms_rx_setup()
- *
- * i2400ms_bus_dev_stop() Called by i2400m_dev_stop() [who is
- * i2400ms_rx_release() is called by i2400m_release()]
- * i2400ms_tx_release()
- *
*/
#include <linux/debugfs.h>
@@ -71,6 +62,14 @@
static int ioe_timeout = 2;
module_param(ioe_timeout, int, 0);
+static char i2400ms_debug_params[128];
+module_param_string(debug, i2400ms_debug_params, sizeof(i2400ms_debug_params),
+ 0644);
+MODULE_PARM_DESC(debug,
+ "String of space-separated NAME:VALUE pairs, where NAMEs "
+ "are the different debug submodules and VALUE are the "
+ "initial debug value to set.");
+
/* Our firmware file name list */
static const char *i2400ms_bus_fw_names[] = {
#define I2400MS_FW_FILE_NAME "i2400m-fw-sdio-1.3.sbcf"
@@ -95,17 +94,24 @@ static const struct i2400m_poke_table i2400ms_pokes[] = {
* when we ask it to explicitly doing). Tries until a timeout is
* reached.
*
+ * The @maxtries argument indicates how many times (at most) it should
+ * be tried to enable the function. 0 means forever. This acts along
+ * with the timeout (ie: it'll stop trying as soon as the maximum
+ * number of tries is reached _or_ as soon as the timeout is reached).
+ *
* The reverse of this is...sdio_disable_function()
*
* Returns: 0 if the SDIO function was enabled, < 0 errno code on
* error (-ENODEV when it was unable to enable the function).
*/
static
-int i2400ms_enable_function(struct sdio_func *func)
+int i2400ms_enable_function(struct i2400ms *i2400ms, unsigned maxtries)
{
+ struct sdio_func *func = i2400ms->func;
u64 timeout;
int err;
struct device *dev = &func->dev;
+ unsigned tries = 0;
d_fnstart(3, dev, "(func %p)\n", func);
/* Setup timeout (FIXME: This needs to read the CIS table to
@@ -115,6 +121,14 @@ int i2400ms_enable_function(struct sdio_func *func)
err = -ENODEV;
while (err != 0 && time_before64(get_jiffies_64(), timeout)) {
sdio_claim_host(func);
+ /*
+ * There is a sillicon bug on the IWMC3200, where the
+ * IOE timeout will cause problems on Moorestown
+ * platforms (system hang). We explicitly overwrite
+ * func->enable_timeout here to work around the issue.
+ */
+ if (i2400ms->iwmc3200)
+ func->enable_timeout = IWMC3200_IOR_TIMEOUT;
err = sdio_enable_func(func);
if (0 == err) {
sdio_release_host(func);
@@ -122,8 +136,11 @@ int i2400ms_enable_function(struct sdio_func *func)
goto function_enabled;
}
d_printf(2, dev, "SDIO function failed to enable: %d\n", err);
- sdio_disable_func(func);
sdio_release_host(func);
+ if (maxtries > 0 && ++tries >= maxtries) {
+ err = -ETIME;
+ break;
+ }
msleep(I2400MS_INIT_SLEEP_INTERVAL);
}
/* If timed out, device is not there yet -- get -ENODEV so
@@ -140,46 +157,99 @@ function_enabled:
/*
- * Setup driver resources needed to communicate with the device
+ * Setup minimal device communication infrastructure needed to at
+ * least be able to update the firmware.
*
- * The fw needs some time to settle, and it was just uploaded,
- * so give it a break first. I'd prefer to just wait for the device to
- * send something, but seems the poking we do to enable SDIO stuff
- * interferes with it, so just give it a break before starting...
+ * Note the ugly trick: if we are in the probe path
+ * (i2400ms->debugfs_dentry == NULL), we only retry function
+ * enablement one, to avoid racing with the iwmc3200 top controller.
*/
static
-int i2400ms_bus_dev_start(struct i2400m *i2400m)
+int i2400ms_bus_setup(struct i2400m *i2400m)
{
int result;
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
+ struct i2400ms *i2400ms =
+ container_of(i2400m, struct i2400ms, i2400m);
+ struct device *dev = i2400m_dev(i2400m);
struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
+ int retries;
+
+ sdio_claim_host(func);
+ result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
+ sdio_release_host(func);
+ if (result < 0) {
+ dev_err(dev, "Failed to set block size: %d\n", result);
+ goto error_set_blk_size;
+ }
+
+ if (i2400ms->iwmc3200 && i2400ms->debugfs_dentry == NULL)
+ retries = 1;
+ else
+ retries = 0;
+ result = i2400ms_enable_function(i2400ms, retries);
+ if (result < 0) {
+ dev_err(dev, "Cannot enable SDIO function: %d\n", result);
+ goto error_func_enable;
+ }
- d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
- msleep(200);
result = i2400ms_tx_setup(i2400ms);
if (result < 0)
goto error_tx_setup;
- d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
- return result;
+ result = i2400ms_rx_setup(i2400ms);
+ if (result < 0)
+ goto error_rx_setup;
+ return 0;
-error_tx_setup:
+error_rx_setup:
i2400ms_tx_release(i2400ms);
- d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
+error_tx_setup:
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+error_func_enable:
+error_set_blk_size:
return result;
}
+/*
+ * Tear down minimal device communication infrastructure needed to at
+ * least be able to update the firmware.
+ */
+static
+void i2400ms_bus_release(struct i2400m *i2400m)
+{
+ struct i2400ms *i2400ms =
+ container_of(i2400m, struct i2400ms, i2400m);
+ struct sdio_func *func = i2400ms->func;
+
+ i2400ms_rx_release(i2400ms);
+ i2400ms_tx_release(i2400ms);
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+}
+
+
+/*
+ * Setup driver resources needed to communicate with the device
+ *
+ * The fw needs some time to settle, and it was just uploaded,
+ * so give it a break first. I'd prefer to just wait for the device to
+ * send something, but seems the poking we do to enable SDIO stuff
+ * interferes with it, so just give it a break before starting...
+ */
static
-void i2400ms_bus_dev_stop(struct i2400m *i2400m)
+int i2400ms_bus_dev_start(struct i2400m *i2400m)
{
struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
- i2400ms_tx_release(i2400ms);
- d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
+ msleep(200);
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, 0);
+ return 0;
}
@@ -233,18 +303,17 @@ error_kzalloc:
* Warm reset:
*
* The device will be fully reset internally, but won't be
- * disconnected from the USB bus (so no reenumeration will
+ * disconnected from the bus (so no reenumeration will
* happen). Firmware upload will be neccessary.
*
- * The device will send a reboot barker in the notification endpoint
- * that will trigger the driver to reinitialize the state
- * automatically from notif.c:i2400m_notification_grok() into
- * i2400m_dev_bootstrap_delayed().
+ * The device will send a reboot barker that will trigger the driver
+ * to reinitialize the state via __i2400m_dev_reset_handle.
*
- * Cold and bus (USB) reset:
+ *
+ * Cold and bus reset:
*
* The device will be fully reset internally, disconnected from the
- * USB bus an a reenumeration will happen. Firmware upload will be
+ * bus an a reenumeration will happen. Firmware upload will be
* neccessary. Thus, we don't do any locking or struct
* reinitialization, as we are going to be fully disconnected and
* reenumerated.
@@ -283,25 +352,13 @@ int i2400ms_bus_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
sizeof(i2400m_COLD_BOOT_BARKER));
else if (rt == I2400M_RT_BUS) {
do_bus_reset:
- /* call netif_tx_disable() before sending IOE disable,
- * so that all the tx from network layer are stopped
- * while IOE is being reset. Make sure it is called
- * only after register_netdev() was issued.
- */
- if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
- netif_tx_disable(i2400m->wimax_dev.net_dev);
- i2400ms_rx_release(i2400ms);
- sdio_claim_host(i2400ms->func);
- sdio_disable_func(i2400ms->func);
- sdio_release_host(i2400ms->func);
+ i2400ms_bus_release(i2400m);
/* Wait for the device to settle */
msleep(40);
- result = i2400ms_enable_function(i2400ms->func);
- if (result >= 0)
- i2400ms_rx_setup(i2400ms);
+ result = i2400ms_bus_setup(i2400m);
} else
BUG();
if (result < 0 && rt != I2400M_RT_BUS) {
@@ -350,7 +407,7 @@ int i2400ms_debugfs_add(struct i2400ms *i2400ms)
int result;
struct dentry *dentry = i2400ms->i2400m.wimax_dev.debugfs_dentry;
- dentry = debugfs_create_dir("i2400m-usb", dentry);
+ dentry = debugfs_create_dir("i2400m-sdio", dentry);
result = PTR_ERR(dentry);
if (IS_ERR(dentry)) {
if (result == -ENODEV)
@@ -367,6 +424,7 @@ int i2400ms_debugfs_add(struct i2400ms *i2400ms)
error:
debugfs_remove_recursive(i2400ms->debugfs_dentry);
+ i2400ms->debugfs_dentry = NULL;
return result;
}
@@ -425,37 +483,30 @@ int i2400ms_probe(struct sdio_func *func,
i2400m->bus_tx_block_size = I2400MS_BLK_SIZE;
i2400m->bus_pl_size_max = I2400MS_PL_SIZE_MAX;
+ i2400m->bus_setup = i2400ms_bus_setup;
i2400m->bus_dev_start = i2400ms_bus_dev_start;
- i2400m->bus_dev_stop = i2400ms_bus_dev_stop;
+ i2400m->bus_dev_stop = NULL;
+ i2400m->bus_release = i2400ms_bus_release;
i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
i2400m->bus_reset = i2400ms_bus_reset;
/* The iwmc3200-wimax sometimes requires the driver to try
* hard when we paint it into a corner. */
- i2400m->bus_bm_retries = I3200_BOOT_RETRIES;
+ i2400m->bus_bm_retries = I2400M_SDIO_BOOT_RETRIES;
i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
i2400m->bus_fw_names = i2400ms_bus_fw_names;
i2400m->bus_bm_mac_addr_impaired = 1;
i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
- sdio_claim_host(func);
- result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
- sdio_release_host(func);
- if (result < 0) {
- dev_err(dev, "Failed to set block size: %d\n", result);
- goto error_set_blk_size;
- }
-
- result = i2400ms_enable_function(i2400ms->func);
- if (result < 0) {
- dev_err(dev, "Cannot enable SDIO function: %d\n", result);
- goto error_func_enable;
+ switch (func->device) {
+ case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX:
+ case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5:
+ i2400ms->iwmc3200 = 1;
+ break;
+ default:
+ i2400ms->iwmc3200 = 0;
}
- result = i2400ms_rx_setup(i2400ms);
- if (result < 0)
- goto error_rx_setup;
-
result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
if (result < 0) {
dev_err(dev, "cannot setup device: %d\n", result);
@@ -473,13 +524,6 @@ int i2400ms_probe(struct sdio_func *func,
error_debugfs_add:
i2400m_release(i2400m);
error_setup:
- i2400ms_rx_release(i2400ms);
-error_rx_setup:
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
-error_func_enable:
-error_set_blk_size:
sdio_set_drvdata(func, NULL);
free_netdev(net_dev);
error_alloc_netdev:
@@ -497,12 +541,9 @@ void i2400ms_remove(struct sdio_func *func)
d_fnstart(3, dev, "SDIO func %p\n", func);
debugfs_remove_recursive(i2400ms->debugfs_dentry);
- i2400ms_rx_release(i2400ms);
+ i2400ms->debugfs_dentry = NULL;
i2400m_release(i2400m);
sdio_set_drvdata(func, NULL);
- sdio_claim_host(func);
- sdio_disable_func(func);
- sdio_release_host(func);
free_netdev(net_dev);
d_fnend(3, dev, "SDIO func %p\n", func);
}
@@ -512,6 +553,8 @@ const struct sdio_device_id i2400ms_sdio_ids[] = {
/* Intel: i2400m WiMAX (iwmc3200) over SDIO */
{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
+ SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5) },
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(sdio, i2400ms_sdio_ids);
@@ -529,6 +572,8 @@ struct sdio_driver i2400m_sdio_driver = {
static
int __init i2400ms_driver_init(void)
{
+ d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400ms_debug_params,
+ "i2400m_sdio.debug");
return sdio_register_driver(&i2400m_sdio_driver);
}
module_init(i2400ms_driver_init);
OpenPOWER on IntegriCloud