diff options
Diffstat (limited to 'drivers/net/wimax/i2400m/sdio-rx.c')
| -rw-r--r-- | drivers/net/wimax/i2400m/sdio-rx.c | 301 |
1 files changed, 0 insertions, 301 deletions
diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c deleted file mode 100644 index fb6396d..0000000 --- a/drivers/net/wimax/i2400m/sdio-rx.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * SDIO RX handling - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Dirk Brandewie <dirk.j.brandewie@intel.com> - * - Initial implementation - * - * - * This handles the RX path on SDIO. - * - * The SDIO bus driver calls the "irq" routine when data is available. - * This is not a traditional interrupt routine since the SDIO bus - * driver calls us from its irq thread context. Because of this - * sleeping in the SDIO RX IRQ routine is okay. - * - * From there on, we obtain the size of the data that is available, - * allocate an skb, copy it and then pass it to the generic driver's - * RX routine [i2400m_rx()]. - * - * ROADMAP - * - * i2400ms_irq() - * i2400ms_rx() - * __i2400ms_rx_get_size() - * i2400m_is_boot_barker() - * i2400m_rx() - * - * i2400ms_rx_setup() - * - * i2400ms_rx_release() - */ -#include <linux/workqueue.h> -#include <linux/wait.h> -#include <linux/skbuff.h> -#include <linux/mmc/sdio.h> -#include <linux/mmc/sdio_func.h> -#include <linux/slab.h> -#include "i2400m-sdio.h" - -#define D_SUBMODULE rx -#include "sdio-debug-levels.h" - -static const __le32 i2400m_ACK_BARKER[4] = { - __constant_cpu_to_le32(I2400M_ACK_BARKER), - __constant_cpu_to_le32(I2400M_ACK_BARKER), - __constant_cpu_to_le32(I2400M_ACK_BARKER), - __constant_cpu_to_le32(I2400M_ACK_BARKER) -}; - - -/* - * Read and return the amount of bytes available for RX - * - * The RX size has to be read like this: byte reads of three - * sequential locations; then glue'em together. - * - * sdio_readl() doesn't work. - */ -static ssize_t __i2400ms_rx_get_size(struct i2400ms *i2400ms) -{ - int ret, cnt, val; - ssize_t rx_size; - unsigned xfer_size_addr; - struct sdio_func *func = i2400ms->func; - struct device *dev = &i2400ms->func->dev; - - d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms); - xfer_size_addr = I2400MS_INTR_GET_SIZE_ADDR; - rx_size = 0; - for (cnt = 0; cnt < 3; cnt++) { - val = sdio_readb(func, xfer_size_addr + cnt, &ret); - if (ret < 0) { - dev_err(dev, "RX: Can't read byte %d of RX size from " - "0x%08x: %d\n", cnt, xfer_size_addr + cnt, ret); - rx_size = ret; - goto error_read; - } - rx_size = rx_size << 8 | (val & 0xff); - } - d_printf(6, dev, "RX: rx_size is %ld\n", (long) rx_size); -error_read: - d_fnend(7, dev, "(i2400ms %p) = %ld\n", i2400ms, (long) rx_size); - return rx_size; -} - - -/* - * Read data from the device (when in normal) - * - * Allocate an SKB of the right size, read the data in and then - * deliver it to the generic layer. - * - * We also check for a reboot barker. That means the device died and - * we have to reboot it. - */ -static -void i2400ms_rx(struct i2400ms *i2400ms) -{ - int ret; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - struct i2400m *i2400m = &i2400ms->i2400m; - struct sk_buff *skb; - ssize_t rx_size; - - d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms); - rx_size = __i2400ms_rx_get_size(i2400ms); - if (rx_size < 0) { - ret = rx_size; - goto error_get_size; - } - /* - * Hardware quirk: make sure to clear the INTR status register - * AFTER getting the data transfer size. - */ - sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret); - - ret = -ENOMEM; - skb = alloc_skb(rx_size, GFP_ATOMIC); - if (NULL == skb) { - dev_err(dev, "RX: unable to alloc skb\n"); - goto error_alloc_skb; - } - ret = sdio_memcpy_fromio(func, skb->data, - I2400MS_DATA_ADDR, rx_size); - if (ret < 0) { - dev_err(dev, "RX: SDIO data read failed: %d\n", ret); - goto error_memcpy_fromio; - } - - rmb(); /* make sure we get boot_mode from dev_reset_handle */ - if (unlikely(i2400m->boot_mode == 1)) { - spin_lock(&i2400m->rx_lock); - i2400ms->bm_ack_size = rx_size; - spin_unlock(&i2400m->rx_lock); - memcpy(i2400m->bm_ack_buf, skb->data, rx_size); - wake_up(&i2400ms->bm_wfa_wq); - d_printf(5, dev, "RX: SDIO boot mode message\n"); - kfree_skb(skb); - goto out; - } - ret = -EIO; - if (unlikely(rx_size < sizeof(__le32))) { - dev_err(dev, "HW BUG? only %zu bytes received\n", rx_size); - goto error_bad_size; - } - if (likely(i2400m_is_d2h_barker(skb->data))) { - skb_put(skb, rx_size); - i2400m_rx(i2400m, skb); - } else if (unlikely(i2400m_is_boot_barker(i2400m, - skb->data, rx_size))) { - ret = i2400m_dev_reset_handle(i2400m, "device rebooted"); - dev_err(dev, "RX: SDIO reboot barker\n"); - kfree_skb(skb); - } else { - i2400m_unknown_barker(i2400m, skb->data, rx_size); - kfree_skb(skb); - } -out: - d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms); - return; - -error_memcpy_fromio: - kfree_skb(skb); -error_alloc_skb: -error_get_size: -error_bad_size: - d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret); -} - - -/* - * Process an interrupt from the SDIO card - * - * FIXME: need to process other events that are not just ready-to-read - * - * Checks there is data ready and then proceeds to read it. - */ -static -void i2400ms_irq(struct sdio_func *func) -{ - int ret; - struct i2400ms *i2400ms = sdio_get_drvdata(func); - struct device *dev = &func->dev; - int val; - - d_fnstart(6, dev, "(i2400ms %p)\n", i2400ms); - val = sdio_readb(func, I2400MS_INTR_STATUS_ADDR, &ret); - if (ret < 0) { - dev_err(dev, "RX: Can't read interrupt status: %d\n", ret); - goto error_no_irq; - } - if (!val) { - dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n"); - goto error_no_irq; - } - i2400ms_rx(i2400ms); -error_no_irq: - d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms); -} - - -/* - * Setup SDIO RX - * - * Hooks up the IRQ handler and then enables IRQs. - */ -int i2400ms_rx_setup(struct i2400ms *i2400ms) -{ - int result; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - struct i2400m *i2400m = &i2400ms->i2400m; - - d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms); - - init_waitqueue_head(&i2400ms->bm_wfa_wq); - spin_lock(&i2400m->rx_lock); - i2400ms->bm_wait_result = -EINPROGRESS; - /* - * Before we are about to enable the RX interrupt, make sure - * bm_ack_size is cleared to -EINPROGRESS which indicates - * no RX interrupt happened yet or the previous interrupt - * has been handled, we are ready to take the new interrupt - */ - i2400ms->bm_ack_size = -EINPROGRESS; - spin_unlock(&i2400m->rx_lock); - - sdio_claim_host(func); - result = sdio_claim_irq(func, i2400ms_irq); - if (result < 0) { - dev_err(dev, "Cannot claim IRQ: %d\n", result); - goto error_irq_claim; - } - result = 0; - sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result); - if (result < 0) { - sdio_release_irq(func); - dev_err(dev, "Failed to enable interrupts %d\n", result); - } -error_irq_claim: - sdio_release_host(func); - d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result); - return result; -} - - -/* - * Tear down SDIO RX - * - * Disables IRQs in the device and removes the IRQ handler. - */ -void i2400ms_rx_release(struct i2400ms *i2400ms) -{ - int result; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - struct i2400m *i2400m = &i2400ms->i2400m; - - d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms); - spin_lock(&i2400m->rx_lock); - i2400ms->bm_ack_size = -EINTR; - spin_unlock(&i2400m->rx_lock); - wake_up_all(&i2400ms->bm_wfa_wq); - sdio_claim_host(func); - sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result); - sdio_release_irq(func); - sdio_release_host(func); - d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result); -} |
