summaryrefslogtreecommitdiffstats
path: root/drivers/net/wd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wd.c')
-rw-r--r--drivers/net/wd.c29
1 files changed, 19 insertions, 10 deletions
diff --git a/drivers/net/wd.c b/drivers/net/wd.c
index fa14255..3c1edda 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/wd.c
@@ -147,6 +147,20 @@ out:
}
#endif
+static const struct net_device_ops wd_netdev_ops = {
+ .ndo_open = wd_open,
+ .ndo_stop = wd_close,
+ .ndo_start_xmit = ei_start_xmit,
+ .ndo_tx_timeout = ei_tx_timeout,
+ .ndo_get_stats = ei_get_stats,
+ .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ei_poll,
+#endif
+};
+
static int __init wd_probe1(struct net_device *dev, int ioaddr)
{
int i;
@@ -156,7 +170,6 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */
const char *model_name;
static unsigned version_printed;
- DECLARE_MAC_BUF(mac);
for (i = 0; i < 8; i++)
checksum += inb(ioaddr + 8 + i);
@@ -178,8 +191,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + 8 + i);
- printk("%s: WD80x3 at %#3x, %s",
- dev->name, ioaddr, print_mac(mac, dev->dev_addr));
+ printk("%s: WD80x3 at %#3x, %pM",
+ dev->name, ioaddr, dev->dev_addr);
/* The following PureData probe code was contributed by
Mike Jagdis <jaggy@purplet.demon.co.uk>. Puredata does software
@@ -332,11 +345,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
ei_status.block_input = &wd_block_input;
ei_status.block_output = &wd_block_output;
ei_status.get_8390_hdr = &wd_get_8390_hdr;
- dev->open = &wd_open;
- dev->stop = &wd_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ei_poll;
-#endif
+
+ dev->netdev_ops = &wd_netdev_ops;
NS8390_init(dev, 0);
#if 1
@@ -366,8 +376,7 @@ wd_open(struct net_device *dev)
outb(ei_status.reg5, ioaddr+WD_CMDREG5);
outb(ei_status.reg0, ioaddr); /* WD_CMDREG */
- ei_open(dev);
- return 0;
+ return ei_open(dev);
}
static void
OpenPOWER on IntegriCloud