summaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/dscc4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan/dscc4.c')
-rw-r--r--drivers/net/wan/dscc4.c2074
1 files changed, 2074 insertions, 0 deletions
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
new file mode 100644
index 0000000..520a77a
--- /dev/null
+++ b/drivers/net/wan/dscc4.c
@@ -0,0 +1,2074 @@
+/*
+ * drivers/net/wan/dscc4/dscc4.c: a DSCC4 HDLC driver for Linux
+ *
+ * This software may be used and distributed according to the terms of the
+ * GNU General Public License.
+ *
+ * The author may be reached as romieu@cogenit.fr.
+ * Specific bug reports/asian food will be welcome.
+ *
+ * Special thanks to the nice people at CS-Telecom for the hardware and the
+ * access to the test/measure tools.
+ *
+ *
+ * Theory of Operation
+ *
+ * I. Board Compatibility
+ *
+ * This device driver is designed for the Siemens PEB20534 4 ports serial
+ * controller as found on Etinc PCISYNC cards. The documentation for the
+ * chipset is available at http://www.infineon.com:
+ * - Data Sheet "DSCC4, DMA Supported Serial Communication Controller with
+ * 4 Channels, PEB 20534 Version 2.1, PEF 20534 Version 2.1";
+ * - Application Hint "Management of DSCC4 on-chip FIFO resources".
+ * - Errata sheet DS5 (courtesy of Michael Skerritt).
+ * Jens David has built an adapter based on the same chipset. Take a look
+ * at http://www.afthd.tu-darmstadt.de/~dg1kjd/pciscc4 for a specific
+ * driver.
+ * Sample code (2 revisions) is available at Infineon.
+ *
+ * II. Board-specific settings
+ *
+ * Pcisync can transmit some clock signal to the outside world on the
+ * *first two* ports provided you put a quartz and a line driver on it and
+ * remove the jumpers. The operation is described on Etinc web site. If you
+ * go DCE on these ports, don't forget to use an adequate cable.
+ *
+ * Sharing of the PCI interrupt line for this board is possible.
+ *
+ * III. Driver operation
+ *
+ * The rx/tx operations are based on a linked list of descriptors. The driver
+ * doesn't use HOLD mode any more. HOLD mode is definitely buggy and the more
+ * I tried to fix it, the more it started to look like (convoluted) software
+ * mutation of LxDA method. Errata sheet DS5 suggests to use LxDA: consider
+ * this a rfc2119 MUST.
+ *
+ * Tx direction
+ * When the tx ring is full, the xmit routine issues a call to netdev_stop.
+ * The device is supposed to be enabled again during an ALLS irq (we could
+ * use HI but as it's easy to lose events, it's fscked).
+ *
+ * Rx direction
+ * The received frames aren't supposed to span over multiple receiving areas.
+ * I may implement it some day but it isn't the highest ranked item.
+ *
+ * IV. Notes
+ * The current error (XDU, RFO) recovery code is untested.
+ * So far, RDO takes his RX channel down and the right sequence to enable it
+ * again is still a mistery. If RDO happens, plan a reboot. More details
+ * in the code (NB: as this happens, TX still works).
+ * Don't mess the cables during operation, especially on DTE ports. I don't
+ * suggest it for DCE either but at least one can get some messages instead
+ * of a complete instant freeze.
+ * Tests are done on Rev. 20 of the silicium. The RDO handling changes with
+ * the documentation/chipset releases.
+ *
+ * TODO:
+ * - test X25.
+ * - use polling at high irq/s,
+ * - performance analysis,
+ * - endianness.
+ *
+ * 2001/12/10 Daniela Squassoni <daniela@cyclades.com>
+ * - Contribution to support the new generic HDLC layer.
+ *
+ * 2002/01 Ueimor
+ * - old style interface removal
+ * - dscc4_release_ring fix (related to DMA mapping)
+ * - hard_start_xmit fix (hint: TxSizeMax)
+ * - misc crapectomy.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <net/syncppp.h>
+#include <linux/hdlc.h>
+
+/* Version */
+static const char version[] = "$Id: dscc4.c,v 1.173 2003/09/20 23:55:34 romieu Exp $ for Linux\n";
+static int debug;
+static int quartz;
+
+#ifdef CONFIG_DSCC4_PCI_RST
+static DECLARE_MUTEX(dscc4_sem);
+static u32 dscc4_pci_config_store[16];
+#endif
+
+#define DRV_NAME "dscc4"
+
+#undef DSCC4_POLLING
+
+/* Module parameters */
+
+MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
+MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler");
+MODULE_LICENSE("GPL");
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug,"Enable/disable extra messages");
+module_param(quartz, int, 0);
+MODULE_PARM_DESC(quartz,"If present, on-board quartz frequency (Hz)");
+
+/* Structures */
+
+struct thingie {
+ int define;
+ u32 bits;
+};
+
+struct TxFD {
+ u32 state;
+ u32 next;
+ u32 data;
+ u32 complete;
+ u32 jiffies; /* Allows sizeof(TxFD) == sizeof(RxFD) + extra hack */
+};
+
+struct RxFD {
+ u32 state1;
+ u32 next;
+ u32 data;
+ u32 state2;
+ u32 end;
+};
+
+#define DUMMY_SKB_SIZE 64
+#define TX_LOW 8
+#define TX_RING_SIZE 32
+#define RX_RING_SIZE 32
+#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct TxFD)
+#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct RxFD)
+#define IRQ_RING_SIZE 64 /* Keep it a multiple of 32 */
+#define TX_TIMEOUT (HZ/10)
+#define DSCC4_HZ_MAX 33000000
+#define BRR_DIVIDER_MAX 64*0x00004000 /* Cf errata DS5 p.10 */
+#define dev_per_card 4
+#define SCC_REGISTERS_MAX 23 /* Cf errata DS5 p.4 */
+
+#define SOURCE_ID(flags) (((flags) >> 28) & 0x03)
+#define TO_SIZE(state) (((state) >> 16) & 0x1fff)
+
+/*
+ * Given the operating range of Linux HDLC, the 2 defines below could be
+ * made simpler. However they are a fine reminder for the limitations of
+ * the driver: it's better to stay < TxSizeMax and < RxSizeMax.
+ */
+#define TO_STATE_TX(len) cpu_to_le32(((len) & TxSizeMax) << 16)
+#define TO_STATE_RX(len) cpu_to_le32((RX_MAX(len) % RxSizeMax) << 16)
+#define RX_MAX(len) ((((len) >> 5) + 1) << 5) /* Cf RLCR */
+#define SCC_REG_START(dpriv) (SCC_START+(dpriv->dev_id)*SCC_OFFSET)
+
+struct dscc4_pci_priv {
+ u32 *iqcfg;
+ int cfg_cur;
+ spinlock_t lock;
+ struct pci_dev *pdev;
+
+ struct dscc4_dev_priv *root;
+ dma_addr_t iqcfg_dma;
+ u32 xtal_hz;
+};
+
+struct dscc4_dev_priv {
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+
+ struct RxFD *rx_fd;
+ struct TxFD *tx_fd;
+ u32 *iqrx;
+ u32 *iqtx;
+
+ /* FIXME: check all the volatile are required */
+ volatile u32 tx_current;
+ u32 rx_current;
+ u32 iqtx_current;
+ u32 iqrx_current;
+
+ volatile u32 tx_dirty;
+ volatile u32 ltda;
+ u32 rx_dirty;
+ u32 lrda;
+
+ dma_addr_t tx_fd_dma;
+ dma_addr_t rx_fd_dma;
+ dma_addr_t iqtx_dma;
+ dma_addr_t iqrx_dma;
+
+ u32 scc_regs[SCC_REGISTERS_MAX]; /* Cf errata DS5 p.4 */
+
+ struct timer_list timer;
+
+ struct dscc4_pci_priv *pci_priv;
+ spinlock_t lock;
+
+ int dev_id;
+ volatile u32 flags;
+ u32 timer_help;
+
+ unsigned short encoding;
+ unsigned short parity;
+ struct net_device *dev;
+ sync_serial_settings settings;
+ void __iomem *base_addr;
+ u32 __pad __attribute__ ((aligned (4)));
+};
+
+/* GLOBAL registers definitions */
+#define GCMDR 0x00
+#define GSTAR 0x04
+#define GMODE 0x08
+#define IQLENR0 0x0C
+#define IQLENR1 0x10
+#define IQRX0 0x14
+#define IQTX0 0x24
+#define IQCFG 0x3c
+#define FIFOCR1 0x44
+#define FIFOCR2 0x48
+#define FIFOCR3 0x4c
+#define FIFOCR4 0x34
+#define CH0CFG 0x50
+#define CH0BRDA 0x54
+#define CH0BTDA 0x58
+#define CH0FRDA 0x98
+#define CH0FTDA 0xb0
+#define CH0LRDA 0xc8
+#define CH0LTDA 0xe0
+
+/* SCC registers definitions */
+#define SCC_START 0x0100
+#define SCC_OFFSET 0x80
+#define CMDR 0x00
+#define STAR 0x04
+#define CCR0 0x08
+#define CCR1 0x0c
+#define CCR2 0x10
+#define BRR 0x2C
+#define RLCR 0x40
+#define IMR 0x54
+#define ISR 0x58
+
+#define GPDIR 0x0400
+#define GPDATA 0x0404
+#define GPIM 0x0408
+
+/* Bit masks */
+#define EncodingMask 0x00700000
+#define CrcMask 0x00000003
+
+#define IntRxScc0 0x10000000
+#define IntTxScc0 0x01000000
+
+#define TxPollCmd 0x00000400
+#define RxActivate 0x08000000
+#define MTFi 0x04000000
+#define Rdr 0x00400000
+#define Rdt 0x00200000
+#define Idr 0x00100000
+#define Idt 0x00080000
+#define TxSccRes 0x01000000
+#define RxSccRes 0x00010000
+#define TxSizeMax 0x1fff /* Datasheet DS1 - 11.1.1.1 */
+#define RxSizeMax 0x1ffc /* Datasheet DS1 - 11.1.2.1 */
+
+#define Ccr0ClockMask 0x0000003f
+#define Ccr1LoopMask 0x00000200
+#define IsrMask 0x000fffff
+#define BrrExpMask 0x00000f00
+#define BrrMultMask 0x0000003f
+#define EncodingMask 0x00700000
+#define Hold 0x40000000
+#define SccBusy 0x10000000
+#define PowerUp 0x80000000
+#define Vis 0x00001000
+#define FrameOk (FrameVfr | FrameCrc)
+#define FrameVfr 0x80
+#define FrameRdo 0x40
+#define FrameCrc 0x20
+#define FrameRab 0x10
+#define FrameAborted 0x00000200
+#define FrameEnd 0x80000000
+#define DataComplete 0x40000000
+#define LengthCheck 0x00008000
+#define SccEvt 0x02000000
+#define NoAck 0x00000200
+#define Action 0x00000001
+#define HiDesc 0x20000000
+
+/* SCC events */
+#define RxEvt 0xf0000000
+#define TxEvt 0x0f000000
+#define Alls 0x00040000
+#define Xdu 0x00010000
+#define Cts 0x00004000
+#define Xmr 0x00002000
+#define Xpr 0x00001000
+#define Rdo 0x00000080
+#define Rfs 0x00000040
+#define Cd 0x00000004
+#define Rfo 0x00000002
+#define Flex 0x00000001
+
+/* DMA core events */
+#define Cfg 0x00200000
+#define Hi 0x00040000
+#define Fi 0x00020000
+#define Err 0x00010000
+#define Arf 0x00000002
+#define ArAck 0x00000001
+
+/* State flags */
+#define Ready 0x00000000
+#define NeedIDR 0x00000001
+#define NeedIDT 0x00000002
+#define RdoSet 0x00000004
+#define FakeReset 0x00000008
+
+/* Don't mask RDO. Ever. */
+#ifdef DSCC4_POLLING
+#define EventsMask 0xfffeef7f
+#else
+#define EventsMask 0xfffa8f7a
+#endif
+
+/* Functions prototypes */
+static void dscc4_rx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
+static void dscc4_tx_irq(struct dscc4_pci_priv *, struct dscc4_dev_priv *);
+static int dscc4_found1(struct pci_dev *, void __iomem *ioaddr);
+static int dscc4_init_one(struct pci_dev *, const struct pci_device_id *ent);
+static int dscc4_open(struct net_device *);
+static int dscc4_start_xmit(struct sk_buff *, struct net_device *);
+static int dscc4_close(struct net_device *);
+static int dscc4_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int dscc4_init_ring(struct net_device *);
+static void dscc4_release_ring(struct dscc4_dev_priv *);
+static void dscc4_timer(unsigned long);
+static void dscc4_tx_timeout(struct net_device *);
+static irqreturn_t dscc4_irq(int irq, void *dev_id, struct pt_regs *ptregs);
+static int dscc4_hdlc_attach(struct net_device *, unsigned short, unsigned short);
+static int dscc4_set_iface(struct dscc4_dev_priv *, struct net_device *);
+#ifdef DSCC4_POLLING
+static int dscc4_tx_poll(struct dscc4_dev_priv *, struct net_device *);
+#endif
+
+static inline struct dscc4_dev_priv *dscc4_priv(struct net_device *dev)
+{
+ return dev_to_hdlc(dev)->priv;
+}
+
+static inline struct net_device *dscc4_to_dev(struct dscc4_dev_priv *p)
+{
+ return p->dev;
+}
+
+static void scc_patchl(u32 mask, u32 value, struct dscc4_dev_priv *dpriv,
+ struct net_device *dev, int offset)
+{
+ u32 state;
+
+ /* Cf scc_writel for concern regarding thread-safety */
+ state = dpriv->scc_regs[offset >> 2];
+ state &= ~mask;
+ state |= value;
+ dpriv->scc_regs[offset >> 2] = state;
+ writel(state, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
+}
+
+static void scc_writel(u32 bits, struct dscc4_dev_priv *dpriv,
+ struct net_device *dev, int offset)
+{
+ /*
+ * Thread-UNsafe.
+ * As of 2002/02/16, there are no thread racing for access.
+ */
+ dpriv->scc_regs[offset >> 2] = bits;
+ writel(bits, dpriv->base_addr + SCC_REG_START(dpriv) + offset);
+}
+
+static inline u32 scc_readl(struct dscc4_dev_priv *dpriv, int offset)
+{
+ return dpriv->scc_regs[offset >> 2];
+}
+
+static u32 scc_readl_star(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+{
+ /* Cf errata DS5 p.4 */
+ readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
+ return readl(dpriv->base_addr + SCC_REG_START(dpriv) + STAR);
+}
+
+static inline void dscc4_do_tx(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ dpriv->ltda = dpriv->tx_fd_dma +
+ ((dpriv->tx_current-1)%TX_RING_SIZE)*sizeof(struct TxFD);
+ writel(dpriv->ltda, dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
+ /* Flush posted writes *NOW* */
+ readl(dpriv->base_addr + CH0LTDA + dpriv->dev_id*4);
+}
+
+static inline void dscc4_rx_update(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ dpriv->lrda = dpriv->rx_fd_dma +
+ ((dpriv->rx_dirty - 1)%RX_RING_SIZE)*sizeof(struct RxFD);
+ writel(dpriv->lrda, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
+}
+
+static inline unsigned int dscc4_tx_done(struct dscc4_dev_priv *dpriv)
+{
+ return dpriv->tx_current == dpriv->tx_dirty;
+}
+
+static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda;
+}
+
+int state_check(u32 state, struct dscc4_dev_priv *dpriv, struct net_device *dev,
+ const char *msg)
+{
+ int ret = 0;
+
+ if (debug > 1) {
+ if (SOURCE_ID(state) != dpriv->dev_id) {
+ printk(KERN_DEBUG "%s (%s): Source Id=%d, state=%08x\n",
+ dev->name, msg, SOURCE_ID(state), state );
+ ret = -1;
+ }
+ if (state & 0x0df80c00) {
+ printk(KERN_DEBUG "%s (%s): state=%08x (UFO alert)\n",
+ dev->name, msg, state);
+ ret = -1;
+ }
+ }
+ return ret;
+}
+
+void dscc4_tx_print(struct net_device *dev, struct dscc4_dev_priv *dpriv,
+ char *msg)
+{
+ printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n",
+ dev->name, dpriv->tx_current, dpriv->tx_dirty, msg);
+}
+
+static void dscc4_release_ring(struct dscc4_dev_priv *dpriv)
+{
+ struct pci_dev *pdev = dpriv->pci_priv->pdev;
+ struct TxFD *tx_fd = dpriv->tx_fd;
+ struct RxFD *rx_fd = dpriv->rx_fd;
+ struct sk_buff **skbuff;
+ int i;
+
+ pci_free_consistent(pdev, TX_TOTAL_SIZE, tx_fd, dpriv->tx_fd_dma);
+ pci_free_consistent(pdev, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
+
+ skbuff = dpriv->tx_skbuff;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ if (*skbuff) {
+ pci_unmap_single(pdev, tx_fd->data, (*skbuff)->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb(*skbuff);
+ }
+ skbuff++;
+ tx_fd++;
+ }
+
+ skbuff = dpriv->rx_skbuff;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (*skbuff) {
+ pci_unmap_single(pdev, rx_fd->data,
+ RX_MAX(HDLC_MAX_MRU), PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(*skbuff);
+ }
+ skbuff++;
+ rx_fd++;
+ }
+}
+
+inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+{
+ unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE;
+ struct RxFD *rx_fd = dpriv->rx_fd + dirty;
+ const int len = RX_MAX(HDLC_MAX_MRU);
+ struct sk_buff *skb;
+ int ret = 0;
+
+ skb = dev_alloc_skb(len);
+ dpriv->rx_skbuff[dirty] = skb;
+ if (skb) {
+ skb->protocol = hdlc_type_trans(skb, dev);
+ rx_fd->data = pci_map_single(dpriv->pci_priv->pdev, skb->data,
+ len, PCI_DMA_FROMDEVICE);
+ } else {
+ rx_fd->data = (u32) NULL;
+ ret = -1;
+ }
+ return ret;
+}
+
+/*
+ * IRQ/thread/whatever safe
+ */
+static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev, char *msg)
+{
+ s8 i = 0;
+
+ do {
+ if (!(scc_readl_star(dpriv, dev) & SccBusy)) {
+ printk(KERN_DEBUG "%s: %s ack (%d try)\n", dev->name,
+ msg, i);
+ goto done;
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(10);
+ rmb();
+ } while (++i > 0);
+ printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
+done:
+ return (i >= 0) ? i : -EAGAIN;
+}
+
+static int dscc4_do_action(struct net_device *dev, char *msg)
+{
+ void __iomem *ioaddr = dscc4_priv(dev)->base_addr;
+ s16 i = 0;
+
+ writel(Action, ioaddr + GCMDR);
+ ioaddr += GSTAR;
+ do {
+ u32 state = readl(ioaddr);
+
+ if (state & ArAck) {
+ printk(KERN_DEBUG "%s: %s ack\n", dev->name, msg);
+ writel(ArAck, ioaddr);
+ goto done;
+ } else if (state & Arf) {
+ printk(KERN_ERR "%s: %s failed\n", dev->name, msg);
+ writel(Arf, ioaddr);
+ i = -1;
+ goto done;
+ }
+ rmb();
+ } while (++i > 0);
+ printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
+done:
+ return i;
+}
+
+static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv)
+{
+ int cur = dpriv->iqtx_current%IRQ_RING_SIZE;
+ s8 i = 0;
+
+ do {
+ if (!(dpriv->flags & (NeedIDR | NeedIDT)) ||
+ (dpriv->iqtx[cur] & Xpr))
+ break;
+ smp_rmb();
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(10);
+ } while (++i > 0);
+
+ return (i >= 0 ) ? i : -EAGAIN;
+}
+
+#if 0 /* dscc4_{rx/tx}_reset are both unreliable - more tweak needed */
+static void dscc4_rx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dpriv->pci_priv->lock, flags);
+ /* Cf errata DS5 p.6 */
+ writel(0x00000000, dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
+ scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
+ readl(dpriv->base_addr + CH0LRDA + dpriv->dev_id*4);
+ writel(MTFi|Rdr, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
+ writel(Action, dpriv->base_addr + GCMDR);
+ spin_unlock_irqrestore(&dpriv->pci_priv->lock, flags);
+}
+
+#endif
+
+#if 0
+static void dscc4_tx_reset(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+{
+ u16 i = 0;
+
+ /* Cf errata DS5 p.7 */
+ scc_patchl(PowerUp, 0, dpriv, dev, CCR0);
+ scc_writel(0x00050000, dpriv, dev, CCR2);
+ /*
+ * Must be longer than the time required to fill the fifo.
+ */
+ while (!dscc4_tx_quiescent(dpriv, dev) && ++i) {
+ udelay(1);
+ wmb();
+ }
+
+ writel(MTFi|Rdt, dpriv->base_addr + dpriv->dev_id*0x0c + CH0CFG);
+ if (dscc4_do_action(dev, "Rdt") < 0)
+ printk(KERN_ERR "%s: Tx reset failed\n", dev->name);
+}
+#endif
+
+/* TODO: (ab)use this function to refill a completely depleted RX ring. */
+static inline void dscc4_rx_skb(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ struct RxFD *rx_fd = dpriv->rx_fd + dpriv->rx_current%RX_RING_SIZE;
+ struct net_device_stats *stats = hdlc_stats(dev);
+ struct pci_dev *pdev = dpriv->pci_priv->pdev;
+ struct sk_buff *skb;
+ int pkt_len;
+
+ skb = dpriv->rx_skbuff[dpriv->rx_current++%RX_RING_SIZE];
+ if (!skb) {
+ printk(KERN_DEBUG "%s: skb=0 (%s)\n", dev->name, __FUNCTION__);
+ goto refill;
+ }
+ pkt_len = TO_SIZE(rx_fd->state2);
+ pci_unmap_single(pdev, rx_fd->data, RX_MAX(HDLC_MAX_MRU), PCI_DMA_FROMDEVICE);
+ if ((skb->data[--pkt_len] & FrameOk) == FrameOk) {
+ stats->rx_packets++;
+ stats->rx_bytes += pkt_len;
+ skb_put(skb, pkt_len);
+ if (netif_running(dev))
+ skb->protocol = hdlc_type_trans(skb, dev);
+ skb->dev->last_rx = jiffies;
+ netif_rx(skb);
+ } else {
+ if (skb->data[pkt_len] & FrameRdo)
+ stats->rx_fifo_errors++;
+ else if (!(skb->data[pkt_len] | ~FrameCrc))
+ stats->rx_crc_errors++;
+ else if (!(skb->data[pkt_len] | ~(FrameVfr | FrameRab)))
+ stats->rx_length_errors++;
+ else
+ stats->rx_errors++;
+ dev_kfree_skb_irq(skb);
+ }
+refill:
+ while ((dpriv->rx_dirty - dpriv->rx_current) % RX_RING_SIZE) {
+ if (try_get_rx_skb(dpriv, dev) < 0)
+ break;
+ dpriv->rx_dirty++;
+ }
+ dscc4_rx_update(dpriv, dev);
+ rx_fd->state2 = 0x00000000;
+ rx_fd->end = 0xbabeface;
+}
+
+static void dscc4_free1(struct pci_dev *pdev)
+{
+ struct dscc4_pci_priv *ppriv;
+ struct dscc4_dev_priv *root;
+ int i;
+
+ ppriv = pci_get_drvdata(pdev);
+ root = ppriv->root;
+
+ for (i = 0; i < dev_per_card; i++)
+ unregister_hdlc_device(dscc4_to_dev(root + i));
+
+ pci_set_drvdata(pdev, NULL);
+
+ for (i = 0; i < dev_per_card; i++)
+ free_netdev(root[i].dev);
+ kfree(root);
+ kfree(ppriv);
+}
+
+static int __devinit dscc4_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct dscc4_pci_priv *priv;
+ struct dscc4_dev_priv *dpriv;
+ void __iomem *ioaddr;
+ int i, rc;
+
+ printk(KERN_DEBUG "%s", version);
+
+ rc = pci_enable_device(pdev);
+ if (rc < 0)
+ goto out;
+
+ rc = pci_request_region(pdev, 0, "registers");
+ if (rc < 0) {
+ printk(KERN_ERR "%s: can't reserve MMIO region (regs)\n",
+ DRV_NAME);
+ goto err_disable_0;
+ }
+ rc = pci_request_region(pdev, 1, "LBI interface");
+ if (rc < 0) {
+ printk(KERN_ERR "%s: can't reserve MMIO region (lbi)\n",
+ DRV_NAME);
+ goto err_free_mmio_region_1;
+ }
+
+ ioaddr = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!ioaddr) {
+ printk(KERN_ERR "%s: cannot remap MMIO region %lx @ %lx\n",
+ DRV_NAME, pci_resource_len(pdev, 0),
+ pci_resource_start(pdev, 0));
+ rc = -EIO;
+ goto err_free_mmio_regions_2;
+ }
+ printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#lx (regs), %#lx (lbi), IRQ %d\n",
+ pci_resource_start(pdev, 0),
+ pci_resource_start(pdev, 1), pdev->irq);
+
+ /* Cf errata DS5 p.2 */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xf8);
+ pci_set_master(pdev);
+
+ rc = dscc4_found1(pdev, ioaddr);
+ if (rc < 0)
+ goto err_iounmap_3;
+
+ priv = pci_get_drvdata(pdev);
+
+ rc = request_irq(pdev->irq, dscc4_irq, SA_SHIRQ, DRV_NAME, priv->root);
+ if (rc < 0) {
+ printk(KERN_WARNING "%s: IRQ %d busy\n", DRV_NAME, pdev->irq);
+ goto err_release_4;
+ }
+
+ /* power up/little endian/dma core controlled via lrda/ltda */
+ writel(0x00000001, ioaddr + GMODE);
+ /* Shared interrupt queue */
+ {
+ u32 bits;
+
+ bits = (IRQ_RING_SIZE >> 5) - 1;
+ bits |= bits << 4;
+ bits |= bits << 8;
+ bits |= bits << 16;
+ writel(bits, ioaddr + IQLENR0);
+ }
+ /* Global interrupt queue */
+ writel((u32)(((IRQ_RING_SIZE >> 5) - 1) << 20), ioaddr + IQLENR1);
+ priv->iqcfg = (u32 *) pci_alloc_consistent(pdev,
+ IRQ_RING_SIZE*sizeof(u32), &priv->iqcfg_dma);
+ if (!priv->iqcfg)
+ goto err_free_irq_5;
+ writel(priv->iqcfg_dma, ioaddr + IQCFG);
+
+ rc = -ENOMEM;
+
+ /*
+ * SCC 0-3 private rx/tx irq structures
+ * IQRX/TXi needs to be set soon. Learned it the hard way...
+ */
+ for (i = 0; i < dev_per_card; i++) {
+ dpriv = priv->root + i;
+ dpriv->iqtx = (u32 *) pci_alloc_consistent(pdev,
+ IRQ_RING_SIZE*sizeof(u32), &dpriv->iqtx_dma);
+ if (!dpriv->iqtx)
+ goto err_free_iqtx_6;
+ writel(dpriv->iqtx_dma, ioaddr + IQTX0 + i*4);
+ }
+ for (i = 0; i < dev_per_card; i++) {
+ dpriv = priv->root + i;
+ dpriv->iqrx = (u32 *) pci_alloc_consistent(pdev,
+ IRQ_RING_SIZE*sizeof(u32), &dpriv->iqrx_dma);
+ if (!dpriv->iqrx)
+ goto err_free_iqrx_7;
+ writel(dpriv->iqrx_dma, ioaddr + IQRX0 + i*4);
+ }
+
+ /* Cf application hint. Beware of hard-lock condition on threshold. */
+ writel(0x42104000, ioaddr + FIFOCR1);
+ //writel(0x9ce69800, ioaddr + FIFOCR2);
+ writel(0xdef6d800, ioaddr + FIFOCR2);
+ //writel(0x11111111, ioaddr + FIFOCR4);
+ writel(0x18181818, ioaddr + FIFOCR4);
+ // FIXME: should depend on the chipset revision
+ writel(0x0000000e, ioaddr + FIFOCR3);
+
+ writel(0xff200001, ioaddr + GCMDR);
+
+ rc = 0;
+out:
+ return rc;
+
+err_free_iqrx_7:
+ while (--i >= 0) {
+ dpriv = priv->root + i;
+ pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
+ dpriv->iqrx, dpriv->iqrx_dma);
+ }
+ i = dev_per_card;
+err_free_iqtx_6:
+ while (--i >= 0) {
+ dpriv = priv->root + i;
+ pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
+ dpriv->iqtx, dpriv->iqtx_dma);
+ }
+ pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32), priv->iqcfg,
+ priv->iqcfg_dma);
+err_free_irq_5:
+ free_irq(pdev->irq, priv->root);
+err_release_4:
+ dscc4_free1(pdev);
+err_iounmap_3:
+ iounmap (ioaddr);
+err_free_mmio_regions_2:
+ pci_release_region(pdev, 1);
+err_free_mmio_region_1:
+ pci_release_region(pdev, 0);
+err_disable_0:
+ pci_disable_device(pdev);
+ goto out;
+};
+
+/*
+ * Let's hope the default values are decent enough to protect my
+ * feet from the user's gun - Ueimor
+ */
+static void dscc4_init_registers(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ /* No interrupts, SCC core disabled. Let's relax */
+ scc_writel(0x00000000, dpriv, dev, CCR0);
+
+ scc_writel(LengthCheck | (HDLC_MAX_MRU >> 5), dpriv, dev, RLCR);
+
+ /*
+ * No address recognition/crc-CCITT/cts enabled
+ * Shared flags transmission disabled - cf errata DS5 p.11
+ * Carrier detect disabled - cf errata p.14
+ * FIXME: carrier detection/polarity may be handled more gracefully.
+ */
+ scc_writel(0x02408000, dpriv, dev, CCR1);
+
+ /* crc not forwarded - Cf errata DS5 p.11 */
+ scc_writel(0x00050008 & ~RxActivate, dpriv, dev, CCR2);
+ // crc forwarded
+ //scc_writel(0x00250008 & ~RxActivate, dpriv, dev, CCR2);
+}
+
+static inline int dscc4_set_quartz(struct dscc4_dev_priv *dpriv, int hz)
+{
+ int ret = 0;
+
+ if ((hz < 0) || (hz > DSCC4_HZ_MAX))
+ ret = -EOPNOTSUPP;
+ else
+ dpriv->pci_priv->xtal_hz = hz;
+
+ return ret;
+}
+
+static int dscc4_found1(struct pci_dev *pdev, void __iomem *ioaddr)
+{
+ struct dscc4_pci_priv *ppriv;
+ struct dscc4_dev_priv *root;
+ int i, ret = -ENOMEM;
+
+ root = kmalloc(dev_per_card*sizeof(*root), GFP_KERNEL);
+ if (!root) {
+ printk(KERN_ERR "%s: can't allocate data\n", DRV_NAME);
+ goto err_out;
+ }
+ memset(root, 0, dev_per_card*sizeof(*root));
+
+ for (i = 0; i < dev_per_card; i++) {
+ root[i].dev = alloc_hdlcdev(root + i);
+ if (!root[i].dev)
+ goto err_free_dev;
+ }
+
+ ppriv = kmalloc(sizeof(*ppriv), GFP_KERNEL);
+ if (!ppriv) {
+ printk(KERN_ERR "%s: can't allocate private data\n", DRV_NAME);
+ goto err_free_dev;
+ }
+ memset(ppriv, 0, sizeof(struct dscc4_pci_priv));
+
+ ppriv->root = root;
+ spin_lock_init(&ppriv->lock);
+
+ for (i = 0; i < dev_per_card; i++) {
+ struct dscc4_dev_priv *dpriv = root + i;
+ struct net_device *d = dscc4_to_dev(dpriv);
+ hdlc_device *hdlc = dev_to_hdlc(d);
+
+ d->base_addr = (unsigned long)ioaddr;
+ d->init = NULL;
+ d->irq = pdev->irq;
+ d->open = dscc4_open;
+ d->stop = dscc4_close;
+ d->set_multicast_list = NULL;
+ d->do_ioctl = dscc4_ioctl;
+ d->tx_timeout = dscc4_tx_timeout;
+ d->watchdog_timeo = TX_TIMEOUT;
+ SET_MODULE_OWNER(d);
+ SET_NETDEV_DEV(d, &pdev->dev);
+
+ dpriv->dev_id = i;
+ dpriv->pci_priv = ppriv;
+ dpriv->base_addr = ioaddr;
+ spin_lock_init(&dpriv->lock);
+
+ hdlc->xmit = dscc4_start_xmit;
+ hdlc->attach = dscc4_hdlc_attach;
+
+ dscc4_init_registers(dpriv, d);
+ dpriv->parity = PARITY_CRC16_PR0_CCITT;
+ dpriv->encoding = ENCODING_NRZ;
+
+ ret = dscc4_init_ring(d);
+ if (ret < 0)
+ goto err_unregister;
+
+ ret = register_hdlc_device(d);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: unable to register\n", DRV_NAME);
+ dscc4_release_ring(dpriv);
+ goto err_unregister;
+ }
+ }
+
+ ret = dscc4_set_quartz(root, quartz);
+ if (ret < 0)
+ goto err_unregister;
+
+ pci_set_drvdata(pdev, ppriv);
+ return ret;
+
+err_unregister:
+ while (i-- > 0) {
+ dscc4_release_ring(root + i);
+ unregister_hdlc_device(dscc4_to_dev(root + i));
+ }
+ kfree(ppriv);
+ i = dev_per_card;
+err_free_dev:
+ while (i-- > 0)
+ free_netdev(root[i].dev);
+ kfree(root);
+err_out:
+ return ret;
+};
+
+/* FIXME: get rid of the unneeded code */
+static void dscc4_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+// struct dscc4_pci_priv *ppriv;
+
+ goto done;
+done:
+ dpriv->timer.expires = jiffies + TX_TIMEOUT;
+ add_timer(&dpriv->timer);
+}
+
+static void dscc4_tx_timeout(struct net_device *dev)
+{
+ /* FIXME: something is missing there */
+}
+
+static int dscc4_loopback_check(struct dscc4_dev_priv *dpriv)
+{
+ sync_serial_settings *settings = &dpriv->settings;
+
+ if (settings->loopback && (settings->clock_type != CLOCK_INT)) {
+ struct net_device *dev = dscc4_to_dev(dpriv);
+
+ printk(KERN_INFO "%s: loopback requires clock\n", dev->name);
+ return -1;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_DSCC4_PCI_RST
+/*
+ * Some DSCC4-based cards wires the GPIO port and the PCI #RST pin together
+ * so as to provide a safe way to reset the asic while not the whole machine
+ * rebooting.
+ *
+ * This code doesn't need to be efficient. Keep It Simple
+ */
+static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr)
+{
+ int i;
+
+ down(&dscc4_sem);
+ for (i = 0; i < 16; i++)
+ pci_read_config_dword(pdev, i << 2, dscc4_pci_config_store + i);
+
+ /* Maximal LBI clock divider (who cares ?) and whole GPIO range. */
+ writel(0x001c0000, ioaddr + GMODE);
+ /* Configure GPIO port as output */
+ writel(0x0000ffff, ioaddr + GPDIR);
+ /* Disable interruption */
+ writel(0x0000ffff, ioaddr + GPIM);
+
+ writel(0x0000ffff, ioaddr + GPDATA);
+ writel(0x00000000, ioaddr + GPDATA);
+
+ /* Flush posted writes */
+ readl(ioaddr + GSTAR);
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(10);
+
+ for (i = 0; i < 16; i++)
+ pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]);
+ up(&dscc4_sem);
+}
+#else
+#define dscc4_pci_reset(pdev,ioaddr) do {} while (0)
+#endif /* CONFIG_DSCC4_PCI_RST */
+
+static int dscc4_open(struct net_device *dev)
+{
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+ struct dscc4_pci_priv *ppriv;
+ int ret = -EAGAIN;
+
+ if ((dscc4_loopback_check(dpriv) < 0) || !dev->hard_start_xmit)
+ goto err;
+
+ if ((ret = hdlc_open(dev)))
+ goto err;
+
+ ppriv = dpriv->pci_priv;
+
+ /*
+ * Due to various bugs, there is no way to reliably reset a
+ * specific port (manufacturer's dependant special PCI #RST wiring
+ * apart: it affects all ports). Thus the device goes in the best
+ * silent mode possible at dscc4_close() time and simply claims to
+ * be up if it's opened again. It still isn't possible to change
+ * the HDLC configuration without rebooting but at least the ports
+ * can be up/down ifconfig'ed without killing the host.
+ */
+ if (dpriv->flags & FakeReset) {
+ dpriv->flags &= ~FakeReset;
+ scc_patchl(0, PowerUp, dpriv, dev, CCR0);
+ scc_patchl(0, 0x00050000, dpriv, dev, CCR2);
+ scc_writel(EventsMask, dpriv, dev, IMR);
+ printk(KERN_INFO "%s: up again.\n", dev->name);
+ goto done;
+ }
+
+ /* IDT+IDR during XPR */
+ dpriv->flags = NeedIDR | NeedIDT;
+
+ scc_patchl(0, PowerUp | Vis, dpriv, dev, CCR0);
+
+ /*
+ * The following is a bit paranoid...
+ *
+ * NB: the datasheet "...CEC will stay active if the SCC is in
+ * power-down mode or..." and CCR2.RAC = 1 are two different
+ * situations.
+ */
+ if (scc_readl_star(dpriv, dev) & SccBusy) {
+ printk(KERN_ERR "%s busy. Try later\n", dev->name);
+ ret = -EAGAIN;
+ goto err_out;
+ } else
+ printk(KERN_INFO "%s: available. Good\n", dev->name);
+
+ scc_writel(EventsMask, dpriv, dev, IMR);
+
+ /* Posted write is flushed in the wait_ack loop */
+ scc_writel(TxSccRes | RxSccRes, dpriv, dev, CMDR);
+
+ if ((ret = dscc4_wait_ack_cec(dpriv, dev, "Cec")) < 0)
+ goto err_disable_scc_events;
+
+ /*
+ * I would expect XPR near CE completion (before ? after ?).
+ * At worst, this code won't see a late XPR and people
+ * will have to re-issue an ifconfig (this is harmless).
+ * WARNING, a really missing XPR usually means a hardware
+ * reset is needed. Suggestions anyone ?
+ */
+ if ((ret = dscc4_xpr_ack(dpriv)) < 0) {
+ printk(KERN_ERR "%s: %s timeout\n", DRV_NAME, "XPR");
+ goto err_disable_scc_events;
+ }
+
+ if (debug > 2)
+ dscc4_tx_print(dev, dpriv, "Open");
+
+done:
+ netif_start_queue(dev);
+
+ init_timer(&dpriv->timer);
+ dpriv->timer.expires = jiffies + 10*HZ;
+ dpriv->timer.data = (unsigned long)dev;
+ dpriv->timer.function = &dscc4_timer;
+ add_timer(&dpriv->timer);
+ netif_carrier_on(dev);
+
+ return 0;
+
+err_disable_scc_events:
+ scc_writel(0xffffffff, dpriv, dev, IMR);
+ scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
+err_out:
+ hdlc_close(dev);
+err:
+ return ret;
+}
+
+#ifdef DSCC4_POLLING
+static int dscc4_tx_poll(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+{
+ /* FIXME: it's gonna be easy (TM), for sure */
+}
+#endif /* DSCC4_POLLING */
+
+static int dscc4_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+ struct dscc4_pci_priv *ppriv = dpriv->pci_priv;
+ struct TxFD *tx_fd;
+ int next;
+
+ next = dpriv->tx_current%TX_RING_SIZE;
+ dpriv->tx_skbuff[next] = skb;
+ tx_fd = dpriv->tx_fd + next;
+ tx_fd->state = FrameEnd | TO_STATE_TX(skb->len);
+ tx_fd->data = pci_map_single(ppriv->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ tx_fd->complete = 0x00000000;
+ tx_fd->jiffies = jiffies;
+ mb();
+
+#ifdef DSCC4_POLLING
+ spin_lock(&dpriv->lock);
+ while (dscc4_tx_poll(dpriv, dev));
+ spin_unlock(&dpriv->lock);
+#endif
+
+ dev->trans_start = jiffies;
+
+ if (debug > 2)
+ dscc4_tx_print(dev, dpriv, "Xmit");
+ /* To be cleaned(unsigned int)/optimized. Later, ok ? */
+ if (!((++dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE))
+ netif_stop_queue(dev);
+
+ if (dscc4_tx_quiescent(dpriv, dev))
+ dscc4_do_tx(dpriv, dev);
+
+ return 0;
+}
+
+static int dscc4_close(struct net_device *dev)
+{
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+
+ del_timer_sync(&dpriv->timer);
+ netif_stop_queue(dev);
+
+ scc_patchl(PowerUp | Vis, 0, dpriv, dev, CCR0);
+ scc_patchl(0x00050000, 0, dpriv, dev, CCR2);
+ scc_writel(0xffffffff, dpriv, dev, IMR);
+
+ dpriv->flags |= FakeReset;
+
+ hdlc_close(dev);
+
+ return 0;
+}
+
+static inline int dscc4_check_clock_ability(int port)
+{
+ int ret = 0;
+
+#ifdef CONFIG_DSCC4_PCISYNC
+ if (port >= 2)
+ ret = -1;
+#endif
+ return ret;
+}
+
+/*
+ * DS1 p.137: "There are a total of 13 different clocking modes..."
+ * ^^
+ * Design choices:
+ * - by default, assume a clock is provided on pin RxClk/TxClk (clock mode 0a).
+ * Clock mode 3b _should_ work but the testing seems to make this point
+ * dubious (DIY testing requires setting CCR0 at 0x00000033).
+ * This is supposed to provide least surprise "DTE like" behavior.
+ * - if line rate is specified, clocks are assumed to be locally generated.
+ * A quartz must be available (on pin XTAL1). Modes 6b/7b are used. Choosing
+ * between these it automagically done according on the required frequency
+ * scaling. Of course some rounding may take place.
+ * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
+ * appropriate external clocking device for testing.
+ * - no time-slot/clock mode 5: shameless lazyness.
+ *
+ * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
+ *
+ * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
+ * won't pass the init sequence. For example, straight back-to-back DTE without
+ * external clock will fail when dscc4_open() (<- 'ifconfig hdlcx xxx') is
+ * called.
+ *
+ * Typos lurk in datasheet (missing divier in clock mode 7a figure 51 p.153
+ * DS0 for example)
+ *
+ * Clock mode related bits of CCR0:
+ * +------------ TOE: output TxClk (0b/2b/3a/3b/6b/7a/7b only)
+ * | +---------- SSEL: sub-mode select 0 -> a, 1 -> b
+ * | | +-------- High Speed: say 0
+ * | | | +-+-+-- Clock Mode: 0..7
+ * | | | | | |
+ * -+-+-+-+-+-+-+-+
+ * x|x|5|4|3|2|1|0| lower bits
+ *
+ * Division factor of BRR: k = (N+1)x2^M (total divider = 16xk in mode 6b)
+ * +-+-+-+------------------ M (0..15)
+ * | | | | +-+-+-+-+-+-- N (0..63)
+ * 0 0 0 0 | | | | 0 0 | | | | | |
+ * ...-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * f|e|d|c|b|a|9|8|7|6|5|4|3|2|1|0| lower bits
+ *
+ */
+static int dscc4_set_clock(struct net_device *dev, u32 *bps, u32 *state)
+{
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+ int ret = -1;
+ u32 brr;
+
+ *state &= ~Ccr0ClockMask;
+ if (*bps) { /* Clock generated - required for DCE */
+ u32 n = 0, m = 0, divider;
+ int xtal;
+
+ xtal = dpriv->pci_priv->xtal_hz;
+ if (!xtal)
+ goto done;
+ if (dscc4_check_clock_ability(dpriv->dev_id) < 0)
+ goto done;
+ divider = xtal / *bps;
+ if (divider > BRR_DIVIDER_MAX) {
+ divider >>= 4;
+ *state |= 0x00000036; /* Clock mode 6b (BRG/16) */
+ } else
+ *state |= 0x00000037; /* Clock mode 7b (BRG) */
+ if (divider >> 22) {
+ n = 63;
+ m = 15;
+ } else if (divider) {
+ /* Extraction of the 6 highest weighted bits */
+ m = 0;
+ while (0xffffffc0 & divider) {
+ m++;
+ divider >>= 1;
+ }
+ n = divider;
+ }
+ brr = (m << 8) | n;
+ divider = n << m;
+ if (!(*state & 0x00000001)) /* ?b mode mask => clock mode 6b */
+ divider <<= 4;
+ *bps = xtal / divider;
+ } else {
+ /*
+ * External clock - DTE
+ * "state" already reflects Clock mode 0a (CCR0 = 0xzzzzzz00).
+ * Nothing more to be done
+ */
+ brr = 0;
+ }
+ scc_writel(brr, dpriv, dev, BRR);
+ ret = 0;
+done:
+ return ret;
+}
+
+static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+ const size_t size = sizeof(dpriv->settings);
+ int ret = 0;
+
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+
+ if (cmd != SIOCWANDEV)
+ return -EOPNOTSUPP;
+
+ switch(ifr->ifr_settings.type) {
+ case IF_GET_IFACE:
+ ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+ if (copy_to_user(line, &dpriv->settings, size))
+ return -EFAULT;
+ break;
+
+ case IF_IFACE_SYNC_SERIAL:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (dpriv->flags & FakeReset) {
+ printk(KERN_INFO "%s: please reset the device"
+ " before this command\n", dev->name);
+ return -EPERM;
+ }
+ if (copy_from_user(&dpriv->settings, line, size))
+ return -EFAULT;
+ ret = dscc4_set_iface(dpriv, dev);
+ break;
+
+ default:
+ ret = hdlc_ioctl(dev, ifr, cmd);
+ break;
+ }
+
+ return ret;
+}
+
+static int dscc4_match(struct thingie *p, int value)
+{
+ int i;
+
+ for (i = 0; p[i].define != -1; i++) {
+ if (value == p[i].define)
+ break;
+ }
+ if (p[i].define == -1)
+ return -1;
+ else
+ return i;
+}
+
+static int dscc4_clock_setting(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ sync_serial_settings *settings = &dpriv->settings;
+ int ret = -EOPNOTSUPP;
+ u32 bps, state;
+
+ bps = settings->clock_rate;
+ state = scc_readl(dpriv, CCR0);
+ if (dscc4_set_clock(dev, &bps, &state) < 0)
+ goto done;
+ if (bps) { /* DCE */
+ printk(KERN_DEBUG "%s: generated RxClk (DCE)\n", dev->name);
+ if (settings->clock_rate != bps) {
+ printk(KERN_DEBUG "%s: clock adjusted (%08d -> %08d)\n",
+ dev->name, settings->clock_rate, bps);
+ settings->clock_rate = bps;
+ }
+ } else { /* DTE */
+ state |= PowerUp | Vis;
+ printk(KERN_DEBUG "%s: external RxClk (DTE)\n", dev->name);
+ }
+ scc_writel(state, dpriv, dev, CCR0);
+ ret = 0;
+done:
+ return ret;
+}
+
+static int dscc4_encoding_setting(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ struct thingie encoding[] = {
+ { ENCODING_NRZ, 0x00000000 },
+ { ENCODING_NRZI, 0x00200000 },
+ { ENCODING_FM_MARK, 0x00400000 },
+ { ENCODING_FM_SPACE, 0x00500000 },
+ { ENCODING_MANCHESTER, 0x00600000 },
+ { -1, 0}
+ };
+ int i, ret = 0;
+
+ i = dscc4_match(encoding, dpriv->encoding);
+ if (i >= 0)
+ scc_patchl(EncodingMask, encoding[i].bits, dpriv, dev, CCR0);
+ else
+ ret = -EOPNOTSUPP;
+ return ret;
+}
+
+static int dscc4_loopback_setting(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ sync_serial_settings *settings = &dpriv->settings;
+ u32 state;
+
+ state = scc_readl(dpriv, CCR1);
+ if (settings->loopback) {
+ printk(KERN_DEBUG "%s: loopback\n", dev->name);
+ state |= 0x00000100;
+ } else {
+ printk(KERN_DEBUG "%s: normal\n", dev->name);
+ state &= ~0x00000100;
+ }
+ scc_writel(state, dpriv, dev, CCR1);
+ return 0;
+}
+
+static int dscc4_crc_setting(struct dscc4_dev_priv *dpriv,
+ struct net_device *dev)
+{
+ struct thingie crc[] = {
+ { PARITY_CRC16_PR0_CCITT, 0x00000010 },
+ { PARITY_CRC16_PR1_CCITT, 0x00000000 },
+ { PARITY_CRC32_PR0_CCITT, 0x00000011 },
+ { PARITY_CRC32_PR1_CCITT, 0x00000001 }
+ };
+ int i, ret = 0;
+
+ i = dscc4_match(crc, dpriv->parity);
+ if (i >= 0)
+ scc_patchl(CrcMask, crc[i].bits, dpriv, dev, CCR1);
+ else
+ ret = -EOPNOTSUPP;
+ return ret;
+}
+
+static int dscc4_set_iface(struct dscc4_dev_priv *dpriv, struct net_device *dev)
+{
+ struct {
+ int (*action)(struct dscc4_dev_priv *, struct net_device *);
+ } *p, do_setting[] = {
+ { dscc4_encoding_setting },
+ { dscc4_clock_setting },
+ { dscc4_loopback_setting },
+ { dscc4_crc_setting },
+ { NULL }
+ };
+ int ret = 0;
+
+ for (p = do_setting; p->action; p++) {
+ if ((ret = p->action(dpriv, dev)) < 0)
+ break;
+ }
+ return ret;
+}
+
+static irqreturn_t dscc4_irq(int irq, void *token, struct pt_regs *ptregs)
+{
+ struct dscc4_dev_priv *root = token;
+ struct dscc4_pci_priv *priv;
+ struct net_device *dev;
+ void __iomem *ioaddr;
+ u32 state;
+ unsigned long flags;
+ int i, handled = 1;
+
+ priv = root->pci_priv;
+ dev = dscc4_to_dev(root);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ ioaddr = root->base_addr;
+
+ state = readl(ioaddr + GSTAR);
+ if (!state) {
+ handled = 0;
+ goto out;
+ }
+ if (debug > 3)
+ printk(KERN_DEBUG "%s: GSTAR = 0x%08x\n", DRV_NAME, state);
+ writel(state, ioaddr + GSTAR);
+
+ if (state & Arf) {
+ printk(KERN_ERR "%s: failure (Arf). Harass the maintener\n",
+ dev->name);
+ goto out;
+ }
+ state &= ~ArAck;
+ if (state & Cfg) {
+ if (debug > 0)
+ printk(KERN_DEBUG "%s: CfgIV\n", DRV_NAME);
+ if (priv->iqcfg[priv->cfg_cur++%IRQ_RING_SIZE] & Arf)
+ printk(KERN_ERR "%s: %s failed\n", dev->name, "CFG");
+ if (!(state &= ~Cfg))
+ goto out;
+ }
+ if (state & RxEvt) {
+ i = dev_per_card - 1;
+ do {
+ dscc4_rx_irq(priv, root + i);
+ } while (--i >= 0);
+ state &= ~RxEvt;
+ }
+ if (state & TxEvt) {
+ i = dev_per_card - 1;
+ do {
+ dscc4_tx_irq(priv, root + i);
+ } while (--i >= 0);
+ state &= ~TxEvt;
+ }
+out:
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_RETVAL(handled);
+}
+
+static void dscc4_tx_irq(struct dscc4_pci_priv *ppriv,
+ struct dscc4_dev_priv *dpriv)
+{
+ struct net_device *dev = dscc4_to_dev(dpriv);
+ u32 state;
+ int cur, loop = 0;
+
+try:
+ cur = dpriv->iqtx_current%IRQ_RING_SIZE;
+ state = dpriv->iqtx[cur];
+ if (!state) {
+ if (debug > 4)
+ printk(KERN_DEBUG "%s: Tx ISR = 0x%08x\n", dev->name,
+ state);
+ if ((debug > 1) && (loop > 1))
+ printk(KERN_DEBUG "%s: Tx irq loop=%d\n", dev->name, loop);
+ if (loop && netif_queue_stopped(dev))
+ if ((dpriv->tx_current - dpriv->tx_dirty)%TX_RING_SIZE)
+ netif_wake_queue(dev);
+
+ if (netif_running(dev) && dscc4_tx_quiescent(dpriv, dev) &&
+ !dscc4_tx_done(dpriv))
+ dscc4_do_tx(dpriv, dev);
+ return;
+ }
+ loop++;
+ dpriv->iqtx[cur] = 0;
+ dpriv->iqtx_current++;
+
+ if (state_check(state, dpriv, dev, "Tx") < 0)
+ return;
+
+ if (state & SccEvt) {
+ if (state & Alls) {
+ struct net_device_stats *stats = hdlc_stats(dev);
+ struct sk_buff *skb;
+ struct TxFD *tx_fd;
+
+ if (debug > 2)
+ dscc4_tx_print(dev, dpriv, "Alls");
+ /*
+ * DataComplete can't be trusted for Tx completion.
+ * Cf errata DS5 p.8
+ */
+ cur = dpriv->tx_dirty%TX_RING_SIZE;
+ tx_fd = dpriv->tx_fd + cur;
+ skb = dpriv->tx_skbuff[cur];
+ if (skb) {
+ pci_unmap_single(ppriv->pdev, tx_fd->data,
+ skb->len, PCI_DMA_TODEVICE);
+ if (tx_fd->state & FrameEnd) {
+ stats->tx_packets++;
+ stats->tx_bytes += skb->len;
+ }
+ dev_kfree_skb_irq(skb);
+ dpriv->tx_skbuff[cur] = NULL;
+ ++dpriv->tx_dirty;
+ } else {
+ if (debug > 1)
+ printk(KERN_ERR "%s Tx: NULL skb %d\n",
+ dev->name, cur);
+ }
+ /*
+ * If the driver ends sending crap on the wire, it
+ * will be way easier to diagnose than the (not so)
+ * random freeze induced by null sized tx frames.
+ */
+ tx_fd->data = tx_fd->next;
+ tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
+ tx_fd->complete = 0x00000000;
+ tx_fd->jiffies = 0;
+
+ if (!(state &= ~Alls))
+ goto try;
+ }
+ /*
+ * Transmit Data Underrun
+ */
+ if (state & Xdu) {
+ printk(KERN_ERR "%s: XDU. Ask maintainer\n", DRV_NAME);
+ dpriv->flags = NeedIDT;
+ /* Tx reset */
+ writel(MTFi | Rdt,
+ dpriv->base_addr + 0x0c*dpriv->dev_id + CH0CFG);
+ writel(Action, dpriv->base_addr + GCMDR);
+ return;
+ }
+ if (state & Cts) {
+ printk(KERN_INFO "%s: CTS transition\n", dev->name);
+ if (!(state &= ~Cts)) /* DEBUG */
+ goto try;
+ }
+ if (state & Xmr) {
+ /* Frame needs to be sent again - FIXME */
+ printk(KERN_ERR "%s: Xmr. Ask maintainer\n", DRV_NAME);
+ if (!(state &= ~Xmr)) /* DEBUG */
+ goto try;
+ }
+ if (state & Xpr) {
+ void __iomem *scc_addr;
+ unsigned long ring;
+ int i;
+
+ /*
+ * - the busy condition happens (sometimes);
+ * - it doesn't seem to make the handler unreliable.
+ */
+ for (i = 1; i; i <<= 1) {
+ if (!(scc_readl_star(dpriv, dev) & SccBusy))
+ break;
+ }
+ if (!i)
+ printk(KERN_INFO "%s busy in irq\n", dev->name);
+
+ scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
+ /* Keep this order: IDT before IDR */
+ if (dpriv->flags & NeedIDT) {
+ if (debug > 2)
+ dscc4_tx_print(dev, dpriv, "Xpr");
+ ring = dpriv->tx_fd_dma +
+ (dpriv->tx_dirty%TX_RING_SIZE)*
+ sizeof(struct TxFD);
+ writel(ring, scc_addr + CH0BTDA);
+ dscc4_do_tx(dpriv, dev);
+ writel(MTFi | Idt, scc_addr + CH0CFG);
+ if (dscc4_do_action(dev, "IDT") < 0)
+ goto err_xpr;
+ dpriv->flags &= ~NeedIDT;
+ }
+ if (dpriv->flags & NeedIDR) {
+ ring = dpriv->rx_fd_dma +
+ (dpriv->rx_current%RX_RING_SIZE)*
+ sizeof(struct RxFD);
+ writel(ring, scc_addr + CH0BRDA);
+ dscc4_rx_update(dpriv, dev);
+ writel(MTFi | Idr, scc_addr + CH0CFG);
+ if (dscc4_do_action(dev, "IDR") < 0)
+ goto err_xpr;
+ dpriv->flags &= ~NeedIDR;
+ smp_wmb();
+ /* Activate receiver and misc */
+ scc_writel(0x08050008, dpriv, dev, CCR2);
+ }
+ err_xpr:
+ if (!(state &= ~Xpr))
+ goto try;
+ }
+ if (state & Cd) {
+ if (debug > 0)
+ printk(KERN_INFO "%s: CD transition\n", dev->name);
+ if (!(state &= ~Cd)) /* DEBUG */
+ goto try;
+ }
+ } else { /* ! SccEvt */
+ if (state & Hi) {
+#ifdef DSCC4_POLLING
+ while (!dscc4_tx_poll(dpriv, dev));
+#endif
+ printk(KERN_INFO "%s: Tx Hi\n", dev->name);
+ state &= ~Hi;
+ }
+ if (state & Err) {
+ printk(KERN_INFO "%s: Tx ERR\n", dev->name);
+ hdlc_stats(dev)->tx_errors++;
+ state &= ~Err;
+ }
+ }
+ goto try;
+}
+
+static void dscc4_rx_irq(struct dscc4_pci_priv *priv,
+ struct dscc4_dev_priv *dpriv)
+{
+ struct net_device *dev = dscc4_to_dev(dpriv);
+ u32 state;
+ int cur;
+
+try:
+ cur = dpriv->iqrx_current%IRQ_RING_SIZE;
+ state = dpriv->iqrx[cur];
+ if (!state)
+ return;
+ dpriv->iqrx[cur] = 0;
+ dpriv->iqrx_current++;
+
+ if (state_check(state, dpriv, dev, "Rx") < 0)
+ return;
+
+ if (!(state & SccEvt)){
+ struct RxFD *rx_fd;
+
+ if (debug > 4)
+ printk(KERN_DEBUG "%s: Rx ISR = 0x%08x\n", dev->name,
+ state);
+ state &= 0x00ffffff;
+ if (state & Err) { /* Hold or reset */
+ printk(KERN_DEBUG "%s: Rx ERR\n", dev->name);
+ cur = dpriv->rx_current%RX_RING_SIZE;
+ rx_fd = dpriv->rx_fd + cur;
+ /*
+ * Presume we're not facing a DMAC receiver reset.
+ * As We use the rx size-filtering feature of the
+ * DSCC4, the beginning of a new frame is waiting in
+ * the rx fifo. I bet a Receive Data Overflow will
+ * happen most of time but let's try and avoid it.
+ * Btw (as for RDO) if one experiences ERR whereas
+ * the system looks rather idle, there may be a
+ * problem with latency. In this case, increasing
+ * RX_RING_SIZE may help.
+ */
+ //while (dpriv->rx_needs_refill) {
+ while (!(rx_fd->state1 & Hold)) {
+ rx_fd++;
+ cur++;
+ if (!(cur = cur%RX_RING_SIZE))
+ rx_fd = dpriv->rx_fd;
+ }
+ //dpriv->rx_needs_refill--;
+ try_get_rx_skb(dpriv, dev);
+ if (!rx_fd->data)
+ goto try;
+ rx_fd->state1 &= ~Hold;
+ rx_fd->state2 = 0x00000000;
+ rx_fd->end = 0xbabeface;
+ //}
+ goto try;
+ }
+ if (state & Fi) {
+ dscc4_rx_skb(dpriv, dev);
+ goto try;
+ }
+ if (state & Hi ) { /* HI bit */
+ printk(KERN_INFO "%s: Rx Hi\n", dev->name);
+ state &= ~Hi;
+ goto try;
+ }
+ } else { /* SccEvt */
+ if (debug > 1) {
+ //FIXME: verifier la presence de tous les evenements
+ static struct {
+ u32 mask;
+ const char *irq_name;
+ } evts[] = {
+ { 0x00008000, "TIN"},
+ { 0x00000020, "RSC"},
+ { 0x00000010, "PCE"},
+ { 0x00000008, "PLLA"},
+ { 0, NULL}
+ }, *evt;
+
+ for (evt = evts; evt->irq_name; evt++) {
+ if (state & evt->mask) {
+ printk(KERN_DEBUG "%s: %s\n",
+ dev->name, evt->irq_name);
+ if (!(state &= ~evt->mask))
+ goto try;
+ }
+ }
+ } else {
+ if (!(state &= ~0x0000c03c))
+ goto try;
+ }
+ if (state & Cts) {
+ printk(KERN_INFO "%s: CTS transition\n", dev->name);
+ if (!(state &= ~Cts)) /* DEBUG */
+ goto try;
+ }
+ /*
+ * Receive Data Overflow (FIXME: fscked)
+ */
+ if (state & Rdo) {
+ struct RxFD *rx_fd;
+ void __iomem *scc_addr;
+ int cur;
+
+ //if (debug)
+ // dscc4_rx_dump(dpriv);
+ scc_addr = dpriv->base_addr + 0x0c*dpriv->dev_id;
+
+ scc_patchl(RxActivate, 0, dpriv, dev, CCR2);
+ /*
+ * This has no effect. Why ?
+ * ORed with TxSccRes, one sees the CFG ack (for
+ * the TX part only).
+ */
+ scc_writel(RxSccRes, dpriv, dev, CMDR);
+ dpriv->flags |= RdoSet;
+
+ /*
+ * Let's try and save something in the received data.
+ * rx_current must be incremented at least once to
+ * avoid HOLD in the BRDA-to-be-pointed desc.
+ */
+ do {
+ cur = dpriv->rx_current++%RX_RING_SIZE;
+ rx_fd = dpriv->rx_fd + cur;
+ if (!(rx_fd->state2 & DataComplete))
+ break;
+ if (rx_fd->state2 & FrameAborted) {
+ hdlc_stats(dev)->rx_over_errors++;
+ rx_fd->state1 |= Hold;
+ rx_fd->state2 = 0x00000000;
+ rx_fd->end = 0xbabeface;
+ } else
+ dscc4_rx_skb(dpriv, dev);
+ } while (1);
+
+ if (debug > 0) {
+ if (dpriv->flags & RdoSet)
+ printk(KERN_DEBUG
+ "%s: no RDO in Rx data\n", DRV_NAME);
+ }
+#ifdef DSCC4_RDO_EXPERIMENTAL_RECOVERY
+ /*
+ * FIXME: must the reset be this violent ?
+ */
+#warning "FIXME: CH0BRDA"
+ writel(dpriv->rx_fd_dma +
+ (dpriv->rx_current%RX_RING_SIZE)*
+ sizeof(struct RxFD), scc_addr + CH0BRDA);
+ writel(MTFi|Rdr|Idr, scc_addr + CH0CFG);
+ if (dscc4_do_action(dev, "RDR") < 0) {
+ printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
+ dev->name, "RDR");
+ goto rdo_end;
+ }
+ writel(MTFi|Idr, scc_addr + CH0CFG);
+ if (dscc4_do_action(dev, "IDR") < 0) {
+ printk(KERN_ERR "%s: RDO recovery failed(%s)\n",
+ dev->name, "IDR");
+ goto rdo_end;
+ }
+ rdo_end:
+#endif
+ scc_patchl(0, RxActivate, dpriv, dev, CCR2);
+ goto try;
+ }
+ if (state & Cd) {
+ printk(KERN_INFO "%s: CD transition\n", dev->name);
+ if (!(state &= ~Cd)) /* DEBUG */
+ goto try;
+ }
+ if (state & Flex) {
+ printk(KERN_DEBUG "%s: Flex. Ttttt...\n", DRV_NAME);
+ if (!(state &= ~Flex))
+ goto try;
+ }
+ }
+}
+
+/*
+ * I had expected the following to work for the first descriptor
+ * (tx_fd->state = 0xc0000000)
+ * - Hold=1 (don't try and branch to the next descripto);
+ * - No=0 (I want an empty data section, i.e. size=0);
+ * - Fe=1 (required by No=0 or we got an Err irq and must reset).
+ * It failed and locked solid. Thus the introduction of a dummy skb.
+ * Problem is acknowledged in errata sheet DS5. Joy :o/
+ */
+struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv)
+{
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(DUMMY_SKB_SIZE);
+ if (skb) {
+ int last = dpriv->tx_dirty%TX_RING_SIZE;
+ struct TxFD *tx_fd = dpriv->tx_fd + last;
+
+ skb->len = DUMMY_SKB_SIZE;
+ memcpy(skb->data, version, strlen(version)%DUMMY_SKB_SIZE);
+ tx_fd->state = FrameEnd | TO_STATE_TX(DUMMY_SKB_SIZE);
+ tx_fd->data = pci_map_single(dpriv->pci_priv->pdev, skb->data,
+ DUMMY_SKB_SIZE, PCI_DMA_TODEVICE);
+ dpriv->tx_skbuff[last] = skb;
+ }
+ return skb;
+}
+
+static int dscc4_init_ring(struct net_device *dev)
+{
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+ struct pci_dev *pdev = dpriv->pci_priv->pdev;
+ struct TxFD *tx_fd;
+ struct RxFD *rx_fd;
+ void *ring;
+ int i;
+
+ ring = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &dpriv->rx_fd_dma);
+ if (!ring)
+ goto err_out;
+ dpriv->rx_fd = rx_fd = (struct RxFD *) ring;
+
+ ring = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &dpriv->tx_fd_dma);
+ if (!ring)
+ goto err_free_dma_rx;
+ dpriv->tx_fd = tx_fd = (struct TxFD *) ring;
+
+ memset(dpriv->tx_skbuff, 0, sizeof(struct sk_buff *)*TX_RING_SIZE);
+ dpriv->tx_dirty = 0xffffffff;
+ i = dpriv->tx_current = 0;
+ do {
+ tx_fd->state = FrameEnd | TO_STATE_TX(2*DUMMY_SKB_SIZE);
+ tx_fd->complete = 0x00000000;
+ /* FIXME: NULL should be ok - to be tried */
+ tx_fd->data = dpriv->tx_fd_dma;
+ (tx_fd++)->next = (u32)(dpriv->tx_fd_dma +
+ (++i%TX_RING_SIZE)*sizeof(*tx_fd));
+ } while (i < TX_RING_SIZE);
+
+ if (dscc4_init_dummy_skb(dpriv) < 0)
+ goto err_free_dma_tx;
+
+ memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE);
+ i = dpriv->rx_dirty = dpriv->rx_current = 0;
+ do {
+ /* size set by the host. Multiple of 4 bytes please */
+ rx_fd->state1 = HiDesc;
+ rx_fd->state2 = 0x00000000;
+ rx_fd->end = 0xbabeface;
+ rx_fd->state1 |= TO_STATE_RX(HDLC_MAX_MRU);
+ // FIXME: return value verifiee mais traitement suspect
+ if (try_get_rx_skb(dpriv, dev) >= 0)
+ dpriv->rx_dirty++;
+ (rx_fd++)->next = (u32)(dpriv->rx_fd_dma +
+ (++i%RX_RING_SIZE)*sizeof(*rx_fd));
+ } while (i < RX_RING_SIZE);
+
+ return 0;
+
+err_free_dma_tx:
+ pci_free_consistent(pdev, TX_TOTAL_SIZE, ring, dpriv->tx_fd_dma);
+err_free_dma_rx:
+ pci_free_consistent(pdev, RX_TOTAL_SIZE, rx_fd, dpriv->rx_fd_dma);
+err_out:
+ return -ENOMEM;
+}
+
+static void __devexit dscc4_remove_one(struct pci_dev *pdev)
+{
+ struct dscc4_pci_priv *ppriv;
+ struct dscc4_dev_priv *root;
+ void __iomem *ioaddr;
+ int i;
+
+ ppriv = pci_get_drvdata(pdev);
+ root = ppriv->root;
+
+ ioaddr = root->base_addr;
+
+ dscc4_pci_reset(pdev, ioaddr);
+
+ free_irq(pdev->irq, root);
+ pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32), ppriv->iqcfg,
+ ppriv->iqcfg_dma);
+ for (i = 0; i < dev_per_card; i++) {
+ struct dscc4_dev_priv *dpriv = root + i;
+
+ dscc4_release_ring(dpriv);
+ pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
+ dpriv->iqrx, dpriv->iqrx_dma);
+ pci_free_consistent(pdev, IRQ_RING_SIZE*sizeof(u32),
+ dpriv->iqtx, dpriv->iqtx_dma);
+ }
+
+ dscc4_free1(pdev);
+
+ iounmap(ioaddr);
+
+ pci_release_region(pdev, 1);
+ pci_release_region(pdev, 0);
+
+ pci_disable_device(pdev);
+}
+
+static int dscc4_hdlc_attach(struct net_device *dev, unsigned short encoding,
+ unsigned short parity)
+{
+ struct dscc4_dev_priv *dpriv = dscc4_priv(dev);
+
+ if (encoding != ENCODING_NRZ &&
+ encoding != ENCODING_NRZI &&
+ encoding != ENCODING_FM_MARK &&
+ encoding != ENCODING_FM_SPACE &&
+ encoding != ENCODING_MANCHESTER)
+ return -EINVAL;
+
+ if (parity != PARITY_NONE &&
+ parity != PARITY_CRC16_PR0_CCITT &&
+ parity != PARITY_CRC16_PR1_CCITT &&
+ parity != PARITY_CRC32_PR0_CCITT &&
+ parity != PARITY_CRC32_PR1_CCITT)
+ return -EINVAL;
+
+ dpriv->encoding = encoding;
+ dpriv->parity = parity;
+ return 0;
+}
+
+#ifndef MODULE
+static int __init dscc4_setup(char *str)
+{
+ int *args[] = { &debug, &quartz, NULL }, **p = args;
+
+ while (*p && (get_option(&str, *p) == 2))
+ p++;
+ return 1;
+}
+
+__setup("dscc4.setup=", dscc4_setup);
+#endif
+
+static struct pci_device_id dscc4_pci_tbl[] = {
+ { PCI_VENDOR_ID_SIEMENS, PCI_DEVICE_ID_SIEMENS_DSCC4,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, dscc4_pci_tbl);
+
+static struct pci_driver dscc4_driver = {
+ .name = DRV_NAME,
+ .id_table = dscc4_pci_tbl,
+ .probe = dscc4_init_one,
+ .remove = __devexit_p(dscc4_remove_one),
+};
+
+static int __init dscc4_init_module(void)
+{
+ return pci_module_init(&dscc4_driver);
+}
+
+static void __exit dscc4_cleanup_module(void)
+{
+ pci_unregister_driver(&dscc4_driver);
+}
+
+module_init(dscc4_init_module);
+module_exit(dscc4_cleanup_module);
OpenPOWER on IntegriCloud