summaryrefslogtreecommitdiffstats
path: root/drivers/net/virtio_net.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/virtio_net.c')
-rw-r--r--drivers/net/virtio_net.c242
1 files changed, 231 insertions, 11 deletions
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index e67d16c..a6f1e19 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -37,12 +37,15 @@ module_param(gso, bool, 0444);
#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
#define GOOD_COPY_LEN 128
+#define VIRTNET_SEND_COMMAND_SG_MAX 2
+
struct virtnet_info
{
struct virtio_device *vdev;
- struct virtqueue *rvq, *svq;
+ struct virtqueue *rvq, *svq, *cvq;
struct net_device *dev;
struct napi_struct napi;
+ unsigned int status;
/* The skb we couldn't send because buffers were full. */
struct sk_buff *last_xmit_skb;
@@ -375,9 +378,9 @@ static void skb_recv_done(struct virtqueue *rvq)
{
struct virtnet_info *vi = rvq->vdev->priv;
/* Schedule NAPI, Suppress further interrupts if successful. */
- if (netif_rx_schedule_prep(&vi->napi)) {
+ if (napi_schedule_prep(&vi->napi)) {
rvq->vq_ops->disable_cb(rvq);
- __netif_rx_schedule(&vi->napi);
+ __napi_schedule(&vi->napi);
}
}
@@ -403,11 +406,11 @@ again:
/* Out of packets? */
if (received < budget) {
- netif_rx_complete(napi);
+ napi_complete(napi);
if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq))
&& napi_schedule_prep(napi)) {
vi->rvq->vq_ops->disable_cb(vi->rvq);
- __netif_rx_schedule(napi);
+ __napi_schedule(napi);
goto again;
}
}
@@ -562,6 +565,22 @@ stop_queue:
goto done;
}
+static int virtnet_set_mac_address(struct net_device *dev, void *p)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct virtio_device *vdev = vi->vdev;
+ int ret;
+
+ ret = eth_mac_addr(dev, p);
+ if (ret)
+ return ret;
+
+ vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
+ dev->dev_addr, dev->addr_len);
+
+ return 0;
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
static void virtnet_netpoll(struct net_device *dev)
{
@@ -581,13 +600,60 @@ static int virtnet_open(struct net_device *dev)
* won't get another interrupt, so process any outstanding packets
* now. virtnet_poll wants re-enable the queue, so we disable here.
* We synchronize against interrupts via NAPI_STATE_SCHED */
- if (netif_rx_schedule_prep(&vi->napi)) {
+ if (napi_schedule_prep(&vi->napi)) {
vi->rvq->vq_ops->disable_cb(vi->rvq);
- __netif_rx_schedule(&vi->napi);
+ __napi_schedule(&vi->napi);
}
return 0;
}
+/*
+ * Send command via the control virtqueue and check status. Commands
+ * supported by the hypervisor, as indicated by feature bits, should
+ * never fail unless improperly formated.
+ */
+static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
+ struct scatterlist *data, int out, int in)
+{
+ struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
+ struct virtio_net_ctrl_hdr ctrl;
+ virtio_net_ctrl_ack status = ~0;
+ unsigned int tmp;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
+ BUG(); /* Caller should know better */
+ return false;
+ }
+
+ BUG_ON(out + in > VIRTNET_SEND_COMMAND_SG_MAX);
+
+ out++; /* Add header */
+ in++; /* Add return status */
+
+ ctrl.class = class;
+ ctrl.cmd = cmd;
+
+ sg_init_table(sg, out + in);
+
+ sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
+ memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2));
+ sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
+
+ if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
+ BUG();
+
+ vi->cvq->vq_ops->kick(vi->cvq);
+
+ /*
+ * Spin for a response, the kick causes an ioport write, trapping
+ * into the hypervisor, so the request should be handled immediately.
+ */
+ while (!vi->cvq->vq_ops->get_buf(vi->cvq, &tmp))
+ cpu_relax();
+
+ return status == VIRTIO_NET_OK;
+}
+
static int virtnet_close(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -608,6 +674,99 @@ static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
return ethtool_op_set_tx_hw_csum(dev, data);
}
+static void virtnet_set_rx_mode(struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct scatterlist sg[2];
+ u8 promisc, allmulti;
+ struct virtio_net_ctrl_mac *mac_data;
+ struct dev_addr_list *addr;
+ void *buf;
+ int i;
+
+ /* We can't dynamicaly set ndo_set_rx_mode, so return gracefully */
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_RX))
+ return;
+
+ promisc = ((dev->flags & IFF_PROMISC) != 0);
+ allmulti = ((dev->flags & IFF_ALLMULTI) != 0);
+
+ sg_set_buf(sg, &promisc, sizeof(promisc));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
+ VIRTIO_NET_CTRL_RX_PROMISC,
+ sg, 1, 0))
+ dev_warn(&dev->dev, "Failed to %sable promisc mode.\n",
+ promisc ? "en" : "dis");
+
+ sg_set_buf(sg, &allmulti, sizeof(allmulti));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
+ VIRTIO_NET_CTRL_RX_ALLMULTI,
+ sg, 1, 0))
+ dev_warn(&dev->dev, "Failed to %sable allmulti mode.\n",
+ allmulti ? "en" : "dis");
+
+ /* MAC filter - use one buffer for both lists */
+ mac_data = buf = kzalloc(((dev->uc_count + dev->mc_count) * ETH_ALEN) +
+ (2 * sizeof(mac_data->entries)), GFP_ATOMIC);
+ if (!buf) {
+ dev_warn(&dev->dev, "No memory for MAC address buffer\n");
+ return;
+ }
+
+ /* Store the unicast list and count in the front of the buffer */
+ mac_data->entries = dev->uc_count;
+ addr = dev->uc_list;
+ for (i = 0; i < dev->uc_count; i++, addr = addr->next)
+ memcpy(&mac_data->macs[i][0], addr->da_addr, ETH_ALEN);
+
+ sg_set_buf(&sg[0], mac_data,
+ sizeof(mac_data->entries) + (dev->uc_count * ETH_ALEN));
+
+ /* multicast list and count fill the end */
+ mac_data = (void *)&mac_data->macs[dev->uc_count][0];
+
+ mac_data->entries = dev->mc_count;
+ addr = dev->mc_list;
+ for (i = 0; i < dev->mc_count; i++, addr = addr->next)
+ memcpy(&mac_data->macs[i][0], addr->da_addr, ETH_ALEN);
+
+ sg_set_buf(&sg[1], mac_data,
+ sizeof(mac_data->entries) + (dev->mc_count * ETH_ALEN));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
+ VIRTIO_NET_CTRL_MAC_TABLE_SET,
+ sg, 2, 0))
+ dev_warn(&dev->dev, "Failed to set MAC fitler table.\n");
+
+ kfree(buf);
+}
+
+static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct scatterlist sg;
+
+ sg_set_buf(&sg, &vid, sizeof(vid));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
+ VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0))
+ dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
+}
+
+static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct scatterlist sg;
+
+ sg_set_buf(&sg, &vid, sizeof(vid));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
+ VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0))
+ dev_warn(&dev->dev, "Failed to kill VLAN ID %d.\n", vid);
+}
+
static struct ethtool_ops virtnet_ethtool_ops = {
.set_tx_csum = virtnet_set_tx_csum,
.set_sg = ethtool_op_set_sg,
@@ -631,13 +790,51 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_stop = virtnet_close,
.ndo_start_xmit = start_xmit,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = virtnet_set_mac_address,
+ .ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
+ .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
#endif
};
+static void virtnet_update_status(struct virtnet_info *vi)
+{
+ u16 v;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS))
+ return;
+
+ vi->vdev->config->get(vi->vdev,
+ offsetof(struct virtio_net_config, status),
+ &v, sizeof(v));
+
+ /* Ignore unknown (future) status bits */
+ v &= VIRTIO_NET_S_LINK_UP;
+
+ if (vi->status == v)
+ return;
+
+ vi->status = v;
+
+ if (vi->status & VIRTIO_NET_S_LINK_UP) {
+ netif_carrier_on(vi->dev);
+ netif_wake_queue(vi->dev);
+ } else {
+ netif_carrier_off(vi->dev);
+ netif_stop_queue(vi->dev);
+ }
+}
+
+static void virtnet_config_changed(struct virtio_device *vdev)
+{
+ struct virtnet_info *vi = vdev->priv;
+
+ virtnet_update_status(vi);
+}
+
static int virtnet_probe(struct virtio_device *vdev)
{
int err;
@@ -679,8 +876,11 @@ static int virtnet_probe(struct virtio_device *vdev)
vdev->config->get(vdev,
offsetof(struct virtio_net_config, mac),
dev->dev_addr, dev->addr_len);
- } else
+ } else {
random_ether_addr(dev->dev_addr);
+ vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
+ dev->dev_addr, dev->addr_len);
+ }
/* Set up our device-specific information */
vi = netdev_priv(dev);
@@ -716,6 +916,17 @@ static int virtnet_probe(struct virtio_device *vdev)
goto free_recv;
}
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
+ vi->cvq = vdev->config->find_vq(vdev, 2, NULL);
+ if (IS_ERR(vi->cvq)) {
+ err = PTR_ERR(vi->svq);
+ goto free_send;
+ }
+
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
+ dev->features |= NETIF_F_HW_VLAN_FILTER;
+ }
+
/* Initialize our empty receive and send queues. */
skb_queue_head_init(&vi->recv);
skb_queue_head_init(&vi->send);
@@ -728,7 +939,7 @@ static int virtnet_probe(struct virtio_device *vdev)
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
- goto free_send;
+ goto free_ctrl;
}
/* Last of all, set up some receive buffers. */
@@ -740,6 +951,8 @@ static int virtnet_probe(struct virtio_device *vdev)
goto unregister;
}
+ vi->status = VIRTIO_NET_S_LINK_UP;
+ virtnet_update_status(vi);
netif_carrier_on(dev);
pr_debug("virtnet: registered device %s\n", dev->name);
@@ -747,6 +960,9 @@ static int virtnet_probe(struct virtio_device *vdev)
unregister:
unregister_netdev(dev);
+free_ctrl:
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
+ vdev->config->del_vq(vi->cvq);
free_send:
vdev->config->del_vq(vi->svq);
free_recv:
@@ -778,6 +994,8 @@ static void virtnet_remove(struct virtio_device *vdev)
vdev->config->del_vq(vi->svq);
vdev->config->del_vq(vi->rvq);
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ))
+ vdev->config->del_vq(vi->cvq);
unregister_netdev(vi->dev);
while (vi->pages)
@@ -797,7 +1015,8 @@ static unsigned int features[] = {
VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
VIRTIO_NET_F_GUEST_ECN, /* We don't yet handle UFO input. */
- VIRTIO_NET_F_MRG_RXBUF,
+ VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
+ VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_F_NOTIFY_ON_EMPTY,
};
@@ -809,6 +1028,7 @@ static struct virtio_driver virtio_net = {
.id_table = id_table,
.probe = virtnet_probe,
.remove = __devexit_p(virtnet_remove),
+ .config_changed = virtnet_config_changed,
};
static int __init init(void)
OpenPOWER on IntegriCloud