summaryrefslogtreecommitdiffstats
path: root/drivers/net/via-rhine.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/via-rhine.c')
-rw-r--r--drivers/net/via-rhine.c47
1 files changed, 26 insertions, 21 deletions
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 5b78700..ac07cc6 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -191,12 +191,13 @@ IIId. Synchronization
The driver runs as two independent, single-threaded flows of control. One
is the send-packet routine, which enforces single-threaded use by the
-dev->priv->lock spinlock. The other thread is the interrupt handler, which
-is single threaded by the hardware and interrupt handling software.
+netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler,
+which is single threaded by the hardware and interrupt handling software.
The send packet thread has partial control over the Tx ring. It locks the
-dev->priv->lock whenever it's queuing a Tx packet. If the next slot in the ring
-is not available it stops the transmit queue by calling netif_stop_queue.
+netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in
+the ring is not available it stops the transmit queue by
+calling netif_stop_queue.
The interrupt handler has exclusive control over the Rx ring and records stats
from the Tx ring. After reaping the stats, it marks the Tx queue entry as
@@ -588,7 +589,7 @@ static int rhine_napipoll(struct napi_struct *napi, int budget)
work_done = rhine_rx(dev, budget);
if (work_done < budget) {
- netif_rx_complete(dev, napi);
+ netif_rx_complete(napi);
iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
@@ -614,6 +615,20 @@ static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr)
rhine_reload_eeprom(pioaddr, dev);
}
+static const struct net_device_ops rhine_netdev_ops = {
+ .ndo_open = rhine_open,
+ .ndo_stop = rhine_close,
+ .ndo_start_xmit = rhine_start_tx,
+ .ndo_get_stats = rhine_get_stats,
+ .ndo_set_multicast_list = rhine_set_rx_mode,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rhine_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rhine_poll,
+#endif
+};
+
static int __devinit rhine_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -631,7 +646,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
#else
int bar = 0;
#endif
- DECLARE_MAC_BUF(mac);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@@ -765,18 +779,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
rp->mii_if.reg_num_mask = 0x1f;
/* The chip-specific entries in the device structure. */
- dev->open = rhine_open;
- dev->hard_start_xmit = rhine_start_tx;
- dev->stop = rhine_close;
- dev->get_stats = rhine_get_stats;
- dev->set_multicast_list = rhine_set_rx_mode;
- dev->do_ioctl = netdev_ioctl;
- dev->ethtool_ops = &netdev_ethtool_ops;
- dev->tx_timeout = rhine_tx_timeout;
+ dev->netdev_ops = &rhine_netdev_ops;
+ dev->ethtool_ops = &netdev_ethtool_ops,
dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = rhine_poll;
-#endif
+
netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
if (rp->quirks & rqRhineI)
@@ -787,14 +793,14 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
if (rc)
goto err_out_unmap;
- printk(KERN_INFO "%s: VIA %s at 0x%lx, %s, IRQ %d.\n",
+ printk(KERN_INFO "%s: VIA %s at 0x%lx, %pM, IRQ %d.\n",
dev->name, name,
#ifdef USE_MMIO
memaddr,
#else
(long)ioaddr,
#endif
- print_mac(mac, dev->dev_addr), pdev->irq);
+ dev->dev_addr, pdev->irq);
pci_set_drvdata(pdev, dev);
@@ -1312,7 +1318,7 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
IntrPCIErr | IntrStatsMax | IntrLinkChange,
ioaddr + IntrEnable);
- netif_rx_schedule(dev, &rp->napi);
+ netif_rx_schedule(&rp->napi);
}
if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
@@ -1505,7 +1511,6 @@ static int rhine_rx(struct net_device *dev, int limit)
}
skb->protocol = eth_type_trans(skb, dev);
netif_receive_skb(skb);
- dev->last_rx = jiffies;
rp->stats.rx_bytes += pkt_len;
rp->stats.rx_packets++;
}
OpenPOWER on IntegriCloud