summaryrefslogtreecommitdiffstats
path: root/drivers/net/usb/rtl8150.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb/rtl8150.c')
-rw-r--r--drivers/net/usb/rtl8150.c35
1 files changed, 20 insertions, 15 deletions
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index c81c791..daaa88a 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -791,47 +791,52 @@ static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinf
usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
}
-static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+static int rtl8150_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *ecmd)
{
rtl8150_t *dev = netdev_priv(netdev);
short lpa, bmcr;
+ u32 supported;
- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP | SUPPORTED_MII);
- ecmd->port = PORT_TP;
- ecmd->transceiver = XCVR_INTERNAL;
- ecmd->phy_address = dev->phy;
+ ecmd->base.port = PORT_TP;
+ ecmd->base.phy_address = dev->phy;
get_registers(dev, BMCR, 2, &bmcr);
get_registers(dev, ANLP, 2, &lpa);
if (bmcr & BMCR_ANENABLE) {
u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
SPEED_100 : SPEED_10);
- ethtool_cmd_speed_set(ecmd, speed);
- ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->base.speed = speed;
+ ecmd->base.autoneg = AUTONEG_ENABLE;
if (speed == SPEED_100)
- ecmd->duplex = (lpa & LPA_100FULL) ?
+ ecmd->base.duplex = (lpa & LPA_100FULL) ?
DUPLEX_FULL : DUPLEX_HALF;
else
- ecmd->duplex = (lpa & LPA_10FULL) ?
+ ecmd->base.duplex = (lpa & LPA_10FULL) ?
DUPLEX_FULL : DUPLEX_HALF;
} else {
- ecmd->autoneg = AUTONEG_DISABLE;
- ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
- SPEED_100 : SPEED_10));
- ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
+ ecmd->base.autoneg = AUTONEG_DISABLE;
+ ecmd->base.speed = ((bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10);
+ ecmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
DUPLEX_FULL : DUPLEX_HALF;
}
+
+ ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+ supported);
+
return 0;
}
static const struct ethtool_ops ops = {
.get_drvinfo = rtl8150_get_drvinfo,
- .get_settings = rtl8150_get_settings,
- .get_link = ethtool_op_get_link
+ .get_link = ethtool_op_get_link,
+ .get_link_ksettings = rtl8150_get_link_ksettings,
};
static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
OpenPOWER on IntegriCloud