diff options
Diffstat (limited to 'drivers/net/tulip/pnic2.c')
| -rw-r--r-- | drivers/net/tulip/pnic2.c | 407 |
1 files changed, 407 insertions, 0 deletions
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c new file mode 100644 index 0000000..55f4a9a --- /dev/null +++ b/drivers/net/tulip/pnic2.c @@ -0,0 +1,407 @@ +/* + drivers/net/tulip/pnic2.c + + Maintained by Jeff Garzik <jgarzik@pobox.com> + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + Modified to hep support PNIC_II by Kevin B. Hendricks + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver, or visit the project + Web page at http://sourceforge.net/projects/tulip/ + +*/ + + +/* Understanding the PNIC_II - everything is this file is based + * on the PNIC_II_PDF datasheet which is sorely lacking in detail + * + * As I understand things, here are the registers and bits that + * explain the masks and constants used in this file that are + * either different from the 21142/3 or important for basic operation. + * + * + * CSR 6 (mask = 0xfe3bd1fd of bits not to change) + * ----- + * Bit 24 - SCR + * Bit 23 - PCS + * Bit 22 - TTM (Trasmit Threshold Mode) + * Bit 18 - Port Select + * Bit 13 - Start - 1, Stop - 0 Transmissions + * Bit 11:10 - Loop Back Operation Mode + * Bit 9 - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set) + * Bit 1 - Start - 1, Stop - 0 Receive + * + * + * CSR 14 (mask = 0xfff0ee39 of bits not to change) + * ------ + * Bit 19 - PAUSE-Pause + * Bit 18 - Advertise T4 + * Bit 17 - Advertise 100baseTx-FD + * Bit 16 - Advertise 100baseTx-HD + * Bit 12 - LTE - Link Test Enable + * Bit 7 - ANE - Auto Negotiate Enable + * Bit 6 - HDE - Advertise 10baseT-HD + * Bit 2 - Reset to Power down - kept as 1 for normal operation + * Bit 1 - Loop Back enable for 10baseT MCC + * + * + * CSR 12 + * ------ + * Bit 25 - Partner can do T4 + * Bit 24 - Partner can do 100baseTx-FD + * Bit 23 - Partner can do 100baseTx-HD + * Bit 22 - Partner can do 10baseT-FD + * Bit 21 - Partner can do 10baseT-HD + * Bit 15 - LPN is 1 if all above bits are valid other wise 0 + * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate) + * Bit 3 - Autopolarity state + * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed + * Bit 1 - LS100B - link state of 100baseT 0 - good, 1- faild + * + * + * Data Port Selection Info + *------------------------- + * + * CSR14<7> CSR6<18> CSR6<22> CSR6<23> CSR6<24> MODE/PORT + * 1 0 0 (X) 0 (X) 1 NWAY + * 0 0 1 0 (X) 0 10baseT + * 0 1 0 1 1 (X) 100baseT + * + * + */ + + + +#include <linux/pci.h> +#include "tulip.h" +#include <linux/delay.h> + + +void pnic2_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int next_tick = 60*HZ; + + if (tulip_debug > 3) + printk(KERN_INFO"%s: PNIC2 negotiation status %8.8x.\n", + dev->name,ioread32(ioaddr + CSR12)); + + if (next_tick) { + mod_timer(&tp->timer, RUN_AT(next_tick)); + } +} + + +void pnic2_start_nway(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr14; + int csr12; + + /* set up what to advertise during the negotiation */ + + /* load in csr14 and mask off bits not to touch + * comment at top of file explains mask value + */ + csr14 = (ioread32(ioaddr + CSR14) & 0xfff0ee39); + + /* bit 17 - advetise 100baseTx-FD */ + if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000; + + /* bit 16 - advertise 100baseTx-HD */ + if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000; + + /* bit 6 - advertise 10baseT-HD */ + if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040; + + /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable + * and bit 0 Don't PowerDown 10baseT + */ + csr14 |= 0x00001184; + + if (tulip_debug > 1) + printk(KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, " + "csr14=%8.8x.\n", dev->name, csr14); + + /* tell pnic2_lnk_change we are doing an nway negotiation */ + dev->if_port = 0; + tp->nway = tp->mediasense = 1; + tp->nwayset = tp->lpar = 0; + + /* now we have to set up csr6 for NWAY state */ + + tp->csr6 = ioread32(ioaddr + CSR6); + if (tulip_debug > 1) + printk(KERN_DEBUG "%s: On Entry to Nway, " + "csr6=%8.8x.\n", dev->name, tp->csr6); + + /* mask off any bits not to touch + * comment at top of file explains mask value + */ + tp->csr6 = tp->csr6 & 0xfe3bd1fd; + + /* don't forget that bit 9 is also used for advertising */ + /* advertise 10baseT-FD for the negotiation (bit 9) */ + if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200; + + /* set bit 24 for nway negotiation mode ... + * see Data Port Selection comment at top of file + * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1) + */ + tp->csr6 |= 0x01000000; + iowrite32(csr14, ioaddr + CSR14); + iowrite32(tp->csr6, ioaddr + CSR6); + udelay(100); + + /* all set up so now force the negotiation to begin */ + + /* read in current values and mask off all but the + * Autonegotiation bits 14:12. Writing a 001 to those bits + * should start the autonegotiation + */ + csr12 = (ioread32(ioaddr + CSR12) & 0xffff8fff); + csr12 |= 0x1000; + iowrite32(csr12, ioaddr + CSR12); +} + + + +void pnic2_lnk_change(struct net_device *dev, int csr5) +{ + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr14; + + /* read the staus register to find out what is up */ + int csr12 = ioread32(ioaddr + CSR12); + + if (tulip_debug > 1) + printk(KERN_INFO"%s: PNIC2 link status interrupt %8.8x, " + " CSR5 %x, %8.8x.\n", dev->name, csr12, + csr5, ioread32(ioaddr + CSR14)); + + /* If NWay finished and we have a negotiated partner capability. + * check bits 14:12 for bit pattern 101 - all is good + */ + if (tp->nway && !tp->nwayset) { + + /* we did an auto negotiation */ + + if ((csr12 & 0x7000) == 0x5000) { + + /* negotiation ended successfully */ + + /* get the link partners reply and mask out all but + * bits 24-21 which show the partners capabilites + * and match those to what we advertised + * + * then begin to interpret the results of the negotiation. + * Always go in this order : (we are ignoring T4 for now) + * 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD + */ + + int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise; + tp->lpar = (csr12 >> 16); + tp->nwayset = 1; + + if (negotiated & 0x0100) dev->if_port = 5; + else if (negotiated & 0x0080) dev->if_port = 3; + else if (negotiated & 0x0040) dev->if_port = 4; + else if (negotiated & 0x0020) dev->if_port = 0; + else { + if (tulip_debug > 1) + printk(KERN_INFO "%s: funny autonegotiate result " + "csr12 %8.8x advertising %4.4x\n", + dev->name, csr12, tp->sym_advertise); + tp->nwayset = 0; + /* so check if 100baseTx link state is okay */ + if ((csr12 & 2) == 0 && (tp->sym_advertise & 0x0180)) + dev->if_port = 3; + } + + /* now record the duplex that was negotiated */ + tp->full_duplex = 0; + if ((dev->if_port == 4) || (dev->if_port == 5)) + tp->full_duplex = 1; + + if (tulip_debug > 1) { + if (tp->nwayset) + printk(KERN_INFO "%s: Switching to %s based on link " + "negotiation %4.4x & %4.4x = %4.4x.\n", + dev->name, medianame[dev->if_port], + tp->sym_advertise, tp->lpar, negotiated); + } + + /* remember to turn off bit 7 - autonegotiate + * enable so we can properly end nway mode and + * set duplex (ie. use csr6<9> again) + */ + csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); + iowrite32(csr14,ioaddr + CSR14); + + + /* now set the data port and operating mode + * (see the Data Port Selection comments at + * the top of the file + */ + + /* get current csr6 and mask off bits not to touch */ + /* see comment at top of file */ + + tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); + + /* so if using if_port 3 or 5 then select the 100baseT + * port else select the 10baseT port. + * See the Data Port Selection table at the top + * of the file which was taken from the PNIC_II.PDF + * datasheet + */ + if (dev->if_port & 1) tp->csr6 |= 0x01840000; + else tp->csr6 |= 0x00400000; + + /* now set the full duplex bit appropriately */ + if (tp->full_duplex) tp->csr6 |= 0x00000200; + + iowrite32(1, ioaddr + CSR13); + + if (tulip_debug > 2) + printk(KERN_DEBUG "%s: Setting CSR6 %8.8x/%x CSR12 " + "%8.8x.\n", dev->name, tp->csr6, + ioread32(ioaddr + CSR6), ioread32(ioaddr + CSR12)); + + /* now the following actually writes out the + * new csr6 values + */ + tulip_start_rxtx(tp); + + return; + + } else { + printk(KERN_INFO "%s: Autonegotiation failed, " + "using %s, link beat status %4.4x.\n", + dev->name, medianame[dev->if_port], csr12); + + /* remember to turn off bit 7 - autonegotiate + * enable so we don't forget + */ + csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); + iowrite32(csr14,ioaddr + CSR14); + + /* what should we do when autonegotiate fails? + * should we try again or default to baseline + * case. I just don't know. + * + * for now default to some baseline case + */ + + dev->if_port = 0; + tp->nway = 0; + tp->nwayset = 1; + + /* set to 10baseTx-HD - see Data Port Selection + * comment given at the top of the file + */ + tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); + tp->csr6 |= 0x00400000; + + tulip_restart_rxtx(tp); + + return; + + } + } + + if ((tp->nwayset && (csr5 & 0x08000000) + && (dev->if_port == 3 || dev->if_port == 5) + && (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) { + + /* Link blew? Maybe restart NWay. */ + + if (tulip_debug > 2) + printk(KERN_DEBUG "%s: Ugh! Link blew?\n", dev->name); + + del_timer_sync(&tp->timer); + pnic2_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + + return; + } + + + if (dev->if_port == 3 || dev->if_port == 5) { + + /* we are at 100mb and a potential link change occurred */ + + if (tulip_debug > 1) + printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n", + dev->name, medianame[dev->if_port], + (csr12 & 2) ? "failed" : "good"); + + /* check 100 link beat */ + + tp->nway = 0; + tp->nwayset = 1; + + /* if failed then try doing an nway to get in sync */ + if ((csr12 & 2) && ! tp->medialock) { + del_timer_sync(&tp->timer); + pnic2_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + } + + return; + } + + if (dev->if_port == 0 || dev->if_port == 4) { + + /* we are at 10mb and a potential link change occurred */ + + if (tulip_debug > 1) + printk(KERN_INFO"%s: PNIC2 %s link beat %s.\n", + dev->name, medianame[dev->if_port], + (csr12 & 4) ? "failed" : "good"); + + + tp->nway = 0; + tp->nwayset = 1; + + /* if failed, try doing an nway to get in sync */ + if ((csr12 & 4) && ! tp->medialock) { + del_timer_sync(&tp->timer); + pnic2_start_nway(dev); + tp->timer.expires = RUN_AT(3*HZ); + add_timer(&tp->timer); + } + + return; + } + + + if (tulip_debug > 1) + printk(KERN_INFO"%s: PNIC2 Link Change Default?\n",dev->name); + + /* if all else fails default to trying 10baseT-HD */ + dev->if_port = 0; + + /* make sure autonegotiate enable is off */ + csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f); + iowrite32(csr14,ioaddr + CSR14); + + /* set to 10baseTx-HD - see Data Port Selection + * comment given at the top of the file + */ + tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd); + tp->csr6 |= 0x00400000; + + tulip_restart_rxtx(tp); +} + |
