summaryrefslogtreecommitdiffstats
path: root/drivers/net/tg3.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tg3.h')
-rw-r--r--drivers/net/tg3.h24
1 files changed, 16 insertions, 8 deletions
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 0e29b88..8209da5 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2074,12 +2074,22 @@ struct tg3 {
/* SMP locking strategy:
*
- * lock: Held during all operations except TX packet
- * processing.
+ * lock: Held during reset, PHY access, timer, and when
+ * updating tg3_flags and tg3_flags2.
*
- * tx_lock: Held during tg3_start_xmit and tg3_tx
+ * tx_lock: Held during tg3_start_xmit and tg3_tx only
+ * when calling netif_[start|stop]_queue.
+ * tg3_start_xmit is protected by netif_tx_lock.
*
* Both of these locks are to be held with BH safety.
+ *
+ * Because the IRQ handler, tg3_poll, and tg3_start_xmit
+ * are running lockless, it is necessary to completely
+ * quiesce the chip with tg3_netif_stop and tg3_full_lock
+ * before reconfiguring the device.
+ *
+ * indirect_lock: Held when accessing registers indirectly
+ * with IRQ disabling.
*/
spinlock_t lock;
spinlock_t indirect_lock;
@@ -2155,11 +2165,7 @@ struct tg3 {
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_5701_REG_WRITE_BUG 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
-#if defined(CONFIG_X86)
#define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100
-#else
-#define TG3_FLAG_MBOX_WRITE_REORDER 0 /* disables code too */
-#endif
#define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200
#define TG3_FLAG_WOL_SPEED_100MB 0x00000400
#define TG3_FLAG_WOL_ENABLE 0x00000800
@@ -2172,6 +2178,7 @@ struct tg3 {
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
#define TG3_FLAG_SRAM_USE_CONFIG 0x00100000
+#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000
@@ -2184,7 +2191,7 @@ struct tg3 {
#define TG3_FLAG_INIT_COMPLETE 0x80000000
u32 tg3_flags2;
#define TG3_FLG2_RESTART_TIMER 0x00000001
-#define TG3_FLG2_SUN_570X 0x00000002
+/* 0x00000002 available */
#define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004
#define TG3_FLG2_IS_5788 0x00000008
#define TG3_FLG2_MAX_RXPEND_64 0x00000010
@@ -2216,6 +2223,7 @@ struct tg3 {
#define TG3_FLG2_HW_TSO (TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
#define TG3_FLG2_1SHOT_MSI 0x10000000
#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
+#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
OpenPOWER on IntegriCloud