diff options
Diffstat (limited to 'drivers/net/stmmac/stmmac_mdio.c')
| -rw-r--r-- | drivers/net/stmmac/stmmac_mdio.c | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c new file mode 100644 index 0000000..8498552 --- /dev/null +++ b/drivers/net/stmmac/stmmac_mdio.c @@ -0,0 +1,217 @@ +/******************************************************************************* + STMMAC Ethernet Driver -- MDIO bus implementation + Provides Bus interface for MII registers + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Carl Shaw <carl.shaw@st.com> + Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> +*******************************************************************************/ + +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/phy.h> + +#include "stmmac.h" + +#define MII_BUSY 0x00000001 +#define MII_WRITE 0x00000002 + +/** + * stmmac_mdio_read + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * Description: it reads data from the MII register from within the phy device. + * For the 7111 GMAC, we must set the bit 0 in the MII address register while + * accessing the PHY registers. + * Fortunately, it seems this has no drawback for the 7109 MAC. + */ +static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + int data; + u16 regValue = (((phyaddr << 11) & (0x0000F800)) | + ((phyreg << 6) & (0x000007C0))); + regValue |= MII_BUSY; /* in case of GMAC */ + + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + writel(regValue, ioaddr + mii_address); + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Read the data from the MII data register */ + data = (int)readl(ioaddr + mii_data); + + return data; +} + +/** + * stmmac_mdio_write + * @bus: points to the mii_bus structure + * @phyaddr: MII addr reg bits 15-11 + * @phyreg: MII addr reg bits 10-6 + * @phydata: phy data + * Description: it writes the data into the MII register from within the device. + */ +static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, + u16 phydata) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + unsigned int mii_data = priv->mac_type->hw.mii.data; + + u16 value = + (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) + | MII_WRITE; + + value |= MII_BUSY; + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + /* Set the MII address register to write */ + writel(phydata, ioaddr + mii_data); + writel(value, ioaddr + mii_address); + + /* Wait until any existing MII operation is complete */ + do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1); + + return 0; +} + +/** + * stmmac_mdio_reset + * @bus: points to the mii_bus structure + * Description: reset the MII bus + */ +static int stmmac_mdio_reset(struct mii_bus *bus) +{ + struct net_device *ndev = bus->priv; + struct stmmac_priv *priv = netdev_priv(ndev); + unsigned long ioaddr = ndev->base_addr; + unsigned int mii_address = priv->mac_type->hw.mii.addr; + + if (priv->phy_reset) { + pr_debug("stmmac_mdio_reset: calling phy_reset\n"); + priv->phy_reset(priv->bsp_priv); + } + + /* This is a workaround for problems with the STE101P PHY. + * It doesn't complete its reset until at least one clock cycle + * on MDC, so perform a dummy mdio read. + */ + writel(0, ioaddr + mii_address); + + return 0; +} + +/** + * stmmac_mdio_register + * @ndev: net device structure + * Description: it registers the MII bus + */ +int stmmac_mdio_register(struct net_device *ndev) +{ + int err = 0; + struct mii_bus *new_bus; + int *irqlist; + struct stmmac_priv *priv = netdev_priv(ndev); + int addr, found; + + new_bus = mdiobus_alloc(); + if (new_bus == NULL) + return -ENOMEM; + + irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (irqlist == NULL) { + err = -ENOMEM; + goto irqlist_alloc_fail; + } + + /* Assign IRQ to phy at address phy_addr */ + if (priv->phy_addr != -1) + irqlist[priv->phy_addr] = priv->phy_irq; + + new_bus->name = "STMMAC MII Bus"; + new_bus->read = &stmmac_mdio_read; + new_bus->write = &stmmac_mdio_write; + new_bus->reset = &stmmac_mdio_reset; + snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id); + new_bus->priv = ndev; + new_bus->irq = irqlist; + new_bus->phy_mask = priv->phy_mask; + new_bus->parent = priv->device; + err = mdiobus_register(new_bus); + if (err != 0) { + pr_err("%s: Cannot register as MDIO bus\n", new_bus->name); + goto bus_register_fail; + } + + priv->mii = new_bus; + + found = 0; + for (addr = 0; addr < 32; addr++) { + struct phy_device *phydev = new_bus->phy_map[addr]; + if (phydev) { + if (priv->phy_addr == -1) { + priv->phy_addr = addr; + phydev->irq = priv->phy_irq; + irqlist[addr] = priv->phy_irq; + } + pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n", + ndev->name, phydev->phy_id, addr, + phydev->irq, dev_name(&phydev->dev), + (addr == priv->phy_addr) ? " active" : ""); + found = 1; + } + } + + if (!found) + pr_warning("%s: No PHY found\n", ndev->name); + + return 0; +bus_register_fail: + kfree(irqlist); +irqlist_alloc_fail: + kfree(new_bus); + return err; +} + +/** + * stmmac_mdio_unregister + * @ndev: net device structure + * Description: it unregisters the MII bus + */ +int stmmac_mdio_unregister(struct net_device *ndev) +{ + struct stmmac_priv *priv = netdev_priv(ndev); + + mdiobus_unregister(priv->mii); + priv->mii->priv = NULL; + kfree(priv->mii); + + return 0; +} |
